HUAWEI-MPLSOAM-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-MPLSOAM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, HUAWEI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwMplsOam 1.3.6.1.4.1.2011.5.12.7
The HUAWEI-MPLSOAM-MIB contains objects to configure OAM module. The Operation, Administration and Maintenance (OAM) is an effective means for decreasing the cost of network maintenance. The MPLS OAM is used to administrate and maintain MPLS.
     hwMplsOamPs 1.3.6.1.4.1.2011.5.12.7.1
         hwMplsOamObjects 1.3.6.1.4.1.2011.5.12.7.1.1
             hwMplsOamCapability 1.3.6.1.4.1.2011.5.12.7.1.1.1 unsigned32 read-write
Whether OAM is globally capable. 0: incapable; 1: capable; 2: capable(based-itu); The default value is incapable.
             hwMplsOamIgrTable 1.3.6.1.4.1.2011.5.12.7.1.1.2 no-access
This table specifies per-LSP MPLS OAM capability and associated information, such as IgrTunnName and IgrDetType.
                 hwMplsOamIgrEntry 1.3.6.1.4.1.2011.5.12.7.1.1.2.1 no-access
An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at ingress.
                     hwMplsOamIgrIndex 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.1 unsigned32 no-access
The interface index of the detected tunnel.
                     hwMplsOamIgrTunnName 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.2 octet string read-only
The name of a tunnel. For ingress, it means the tunnel name of the detected LSP. For egress, it means the tunnel name of the reverse LSP.
                     hwMplsOamIgrDetType 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.3 integer read-only
There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of 1/s and terminated at the sink LSR of the LSP. FFD provides failure detection option for an LSP independent of the CV based availability model and is not tied to the CV insertion rate. Insertion rates at 1/s or faster may also be used. The CV/FFD packet contains a network-unique identifier (TTSI) so that all types of defects can be detected. 1: CV; 2: FFD. Enumeration: 'ffd': 2, 'cv': 1.
                     hwMplsOamIgrDetFreq 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.4 integer read-only
For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms. Any other frequency is wrong. 0: 1000ms(only for cv); 1: 10ms; 2: 20ms; 3: 50ms; 4: 100ms; 5: 200ms; 6: 500ms; 7: 3ms. Enumeration: 'ffd200ms6': 5, 'ffd500ms7': 6, 'cv1000ms': 0, 'ffd3ms8': 7, 'ffd50ms4': 3, 'ffd10ms2': 1, 'ffd100ms5': 4, 'ffd20ms3': 2.
                     hwMplsOamIgrRevType 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.5 integer read-only
When an LSP is found to be in defect, the sink LSR if the LSP should send BDI to inform the source LSR of the LSP, the BDI is transferred through the reverse LSP. The type of reverse LSP can be private or shared. If private, then the reverse LSP can be used only when the only LSP is in defect; If shared, the reverse LSP which is shared between many forward LSPs, whose source LSRs are the same and sink LSRs are the same. 1: private; 2: share. Enumeration: 'share': 2, 'private': 1.
                     hwMplsOamIgrRevLspName 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.6 octet string read-only
The object indicates name of the reverse LSP.
                     hwMplsOamIgrRevLsrId 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.7 ipaddress read-only
Only for ingress, the object indicates the ingress LSR ID of the reverse LSP,, expressed in IP address.
                     hwMplsOamIgrRevSessTunnId 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.8 integer32 read-only
Only for ingress, the object indicates the session tunnel ID of the reverse LSP.
                     hwMplsOamIgrEnable 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.9 integer read-only
Whether one LSP is OAM enable. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP,and user can set other configuration. 0: The OAM function is disabled on the ingress; 1: The OAM function is enabled on the ingress. Enumeration: 'enable': 1, 'disable': 0.
                     hwMplsOamIgrValid 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.10 integer read-only
0: stop detect; 1: start detect. Enumeration: 'start': 1, 'stop': 0.
                     hwMplsOamIgrAvaState 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.11 integer read-only
If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP defect state. An LSP re-enters the Available state after the LSP Defect state exists first. T1 defines the length of time the LSP is in the Defect state before declaring an LSP Unavailable or returning to defect free state. 0: available state; 1: unavailable state. Enumeration: 'available': 0, 'unavailable': 1.
                     hwMplsOamIgrDefectType 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.12 integer read-only
Defect is defined as interruption of the capability of a transport entity (e.g., network connection) to transfer user or OAM information. There are six types of defect: 0: no defect; 1: dServer; 2: dPeerMe; 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect; 6: dExcess, Receiving excess rate of CV/FFD; 7: dUnknown, Unknown defect in the MPLS network.. 8: dOamFail, AutoProtocal timer expires. 9: dIngressDown. Enumeration: 'dOamFail': 8, 'dUnknown': 7, 'dExcess': 6, 'dIngressDown': 9, 'dServer': 1, 'dPeerMe': 2, 'dLOCV': 3, 'dTTSI-Mismatch': 4, 'dTTSI-Mismerge': 5, 'nondefect': 0.
                     hwMplsOamIgrRowStatus 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.13 rowstatus read-only
This variable is used to create, modify, and delete a row in this table.
                     hwMplsOamIgrCompatibilityMode 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.14 integer read-only
1: Ptn-Mode; 2: Router-Mode; Valid only for the ingress configuration. Enumeration: 'ptnMode': 1, 'routerMode': 2.
                     hwMplsOamIgrBDIFreq 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.15 integer read-only
BDI is generated at the trail termination source point of a return path in response to a defect detected at the trail termination sink point of an LSP in the forwarding direction. The frequency of BDI can be set by user. 1: per-second; 2: same as detect frequency. Enumeration: 'detectFrequency': 2, 'perSecond': 1.
             hwMplsOamEgrTable 1.3.6.1.4.1.2011.5.12.7.1.1.3 no-access
This table specifies per-LSP MPLS OAM capability and associated information, such as DetectType, DetectFrequency.
                 hwMplsOamEgrEntry 1.3.6.1.4.1.2011.5.12.7.1.1.3.1 no-access
An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at egress.
                     hwMplsOamEgrLspName 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1 octet string no-access
The object indicates the name of static LSP at egress.
                     hwMplsOamEgrLsrId 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2 ipaddress no-access
The object indicates the Ingress LSR ID of the LSP.
                     hwMplsOamEgrSessTunnId 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3 integer32 no-access
The object indicates the the Ingress session tunnel ID of the LSP..
                     hwMplsOamEgrDetType 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4 integer read-only
0: invalid, if auto-protocol, this detect type is invalid; 1: CV; 2: FFD. Enumeration: 'ffd': 2, 'cv': 1, 'invalid': 0.
                     hwMplsOamEgrDetFreq 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5 integer read-only
0: 1000ms(only for cv); 1: 10ms; 2: 20ms; 3: 50ms; 4: 100ms; 5: 200ms; 6: 500ms; 7: invalid; 8: 3ms. Enumeration: 'ffd200ms6': 5, 'ffd3ms9': 8, 'ffd500ms7': 6, 'cv1000ms': 0, 'invalid8': 7, 'ffd50ms4': 3, 'ffd10ms2': 1, 'ffd100ms5': 4, 'ffd20ms3': 2.
                     hwMplsOamEgrRevType 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6 integer read-only
When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP,the BDI is transferred through the reverse LSP. The type of reverse LSP can be private or shared. If private, then the reverse LSP can be used only when the only LSP in defect; If shared, the reverse LSP, which is shared between many forward LSPs that have the same source LSRs and sink LSRs. 0: invalid, when the reverse LSR does not exist; 1: private; 2: share. Enumeration: 'share': 2, 'private': 1, 'invalid': 0.
                     hwMplsOamEgrRevTunnName 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.7 octet string read-only
The object indicates the name of a reverse tunnel.
                     hwMplsOamEgrAutoEn 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.8 integer read-only
If autoprotocol, then the egress can process extended FDI sent by ingress. 0: disable; 1: enable; Valid only for the egress configuration. Enumeration: 'enable': 1, 'disable': 0.
                     hwMplsOamEgrAutoOvertime 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.9 integer32 read-only
This time is set at the egress. If the egress receives CV/FFD, it records the parameters included in the packet, such as OAM type and frequency. If the egress does not receive any OAM packet before the timer expires, the sink LSR will send BDI with dLOCV defect. Valid only for the egress configuration.
                     hwMplsOamEgrBDIFreq 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.10 integer read-only
BDI is generated at the trail termination source point of a return path in response to a defect detected at the trail termination sink point of an LSP in the forwarding direction. The frequency of BDI can be set by user. Only valid for egress configuration. The default value is detect frequency and it is valid only when a backward-LSP exists. 0: per-second; 1: same as detect frequency. Enumeration: 'detectFrequency': 1, 'perSecond': 0.
                     hwMplsOamEgrEnable 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11 integer read-only
Whether one LSP is enabled with OAM. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP, and user can set other configuration. 0: The OAM function is disabled on the egress; 1: The OAM function is enabled on the egress. Enumeration: 'enable': 1, 'disable': 0.
                     hwMplsOamEgrValid 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.12 integer read-only
1: stop detect; 2: start detect. Enumeration: 'start': 2, 'stop': 1.
                     hwMplsOamEgrAvaState 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13 integer read-only
If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP defect state. An LSP re-enters the Available state after the LSP Defect State. first exists. T1 defines the length of time the LSP is in the Defect state before declaring an LSP Unavailable or returning to defect free state 0: available state; 1: unavailable state. Enumeration: 'available': 0, 'unavailable': 1.
                     hwMplsOamEgrDefectType 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.14 integer read-only
0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect.; 6: dExcess, Receiving excess rate of CV/FFD; 7: dUnknown, Unknown defect in the MPLS network. 8: dOamFail, AutoProtocal timer expires. 9: dEgressDown. Enumeration: 'dOamFail': 8, 'dUnknown': 7, 'dExcess': 6, 'dServer': 1, 'dPeerMe': 2, 'dLOCV': 3, 'dTTSI-Mismatch': 4, 'dTTSI-Mismerge': 5, 'dEgressDown': 9, 'nondefect': 0.
                     hwMplsOamEgrRowStatus 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.15 rowstatus read-only
This variable is used to create, modify, and delete a row in this table.
             hwMplsOamRlsnTable 1.3.6.1.4.1.2011.5.12.7.1.1.4 no-access
This table specifies RLSN capability and associated information, such as RlsnLsrId and RlsnLsrId.
                 hwMplsOamRlsnEntry 1.3.6.1.4.1.2011.5.12.7.1.1.4.1 no-access
An entry in this table is created by an LSR to binding the name, lsr-id and tunnel-id of the LSP at egress.
                     hwMplsOamRlsnLspName 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.1 octet string read-only
For egress, the object indicates name of the LSP.
                     hwMplsOamRlsnLsrId 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.2 ipaddress read-only
For egress, the object indicates the Ingress LSR ID of the LSP
                     hwMplsOamRlsnSessTunnId 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.3 integer32 read-only
For egress, the object indicates the Ingress session tunnel ID of the LSP
                     hwMplsOamRlsnIfIndex 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.4 integer32 read-only
The object indicates the index of outbound interface.
                     hwMplsOamRlsnIfName 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.5 octet string read-only
The object indicates the name of outbound interface.
                     hwMplsOamRlsnIsDown 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.6 integer read-only
1: up 2: down Enumeration: 'down': 2, 'up': 1.
                     hwMplsOamRlsnRowStatus 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.7 rowstatus read-only
This variable is used to create, modify, and delete a row in this table.
             hwMplsOamView 1.3.6.1.4.1.2011.5.12.7.1.1.5 integer read-only
Create or delete the MPLS OAM view. 1: create mpls-oam; 0: delete mpls-oam; Enumeration: 'null': 0, 'mpls-oam': 1.
             hwMplsOamL2vcTable 1.3.6.1.4.1.2011.5.12.7.1.1.6 no-access
This table specifies PW MPLS OAM capability and associated information, such as DetType and DetFrequence.
                 hwMplsOamL2vcEntry 1.3.6.1.4.1.2011.5.12.7.1.1.6.1 no-access
An entry in this table is created by binding the peer-ip, vc-type and vc-id.
                     hwMplsOamL2vcPeerIp 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.1 ipaddress no-access
This object indicates the peer ip address.
                     hwMplsOamL2vcVcType 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.2 integer no-access
There are seventeen types of vc. 1: fr; 2: atm-aal5-sdu; 3: atm-trans-cell; 4: vlan; 5: ethernet; 6: hdlc; 7: ppp; 9: atm-nto1-vcc; 10:atm-nto1-vpc; 11:ip-layer2; 12:atm-1to1-vcc; 13:atm-1to1-vpc; 14:atm-aal5-pdu; 17:satop-e1; 18:satop-t1; 21:cesopsn-basic; 64:ip-interworking; 0:unknown. Enumeration: 'atm-trans-cell': 3, 'fr': 1, 'satop-t1': 18, 'atm-1to1-vpc': 13, 'atm-aal5-pd': 14, 'cesopsn-basic': 21, 'atm-nto1-vpc': 10, 'vlan': 4, 'hdlc': 6, 'atm-1to1-vcc': 12, 'ppp': 7, 'satop-e1': 17, 'unknown': 0, 'ip-interworking': 64, 'ethernet': 5, 'ip-layer2': 11, 'atm-aal5-sd': 2, 'atm-nto1-vcc': 9.
                     hwMplsOamL2vcVcId 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.3 unsigned32 no-access
This object indicates the vc id of pw type.
                     hwMplsOamL2vcDetType 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.7 integer read-only
There are two types of OAM packets, CV and FFD. 1: CV; 2: FFD. Enumeration: 'ffd': 2, 'cv': 1.
                     hwMplsOamL2vcDetFreq 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.8 integer read-only
For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms. Any other frequency is wrong. 0: 1000ms(only for cv); 1: 10ms; 2: 20ms; 3: 50ms; 4: 100ms; 5: 200ms; 6: 500ms; 7: 3ms. Enumeration: 'ffd200ms6': 5, 'ffd500ms7': 6, 'cv1000ms': 0, 'ffd3ms8': 7, 'ffd50ms4': 3, 'ffd10ms2': 1, 'ffd100ms5': 4, 'ffd20ms3': 2.
                     hwMplsOamL2vcRevDetType 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.9 integer read-only
0: invalid; 1: CV; 2: FFD. Enumeration: 'ffd': 2, 'cv': 1, 'invalid': 0.
                     hwMplsOamL2vcRevDetFreq 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.10 integer read-only
For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms. Any other frequency is wrong. 0: 1000ms(only for cv); 1: 10ms; 2: 20ms; 3: 50ms; 4: 100ms; 5: 200ms; 6: 500ms; 7: invalid; 8: 3ms. Enumeration: 'ffd200ms6': 5, 'ffd3ms9': 8, 'ffd500ms7': 6, 'cv1000ms': 0, 'invalid8': 7, 'ffd50ms4': 3, 'ffd10ms2': 1, 'ffd100ms5': 4, 'ffd20ms3': 2.
                     hwMplsOamL2vcSendEnable 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.11 integer read-only
0: The OAM Send function is Disabled; 1: The OAM Send function is Eabled; Enumeration: 'enable': 1, 'disable': 0.
                     hwMplsOamL2vcReceiveEnable 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.12 integer read-only
0: The OAM Receive function is Disabled; 1: The OAM Receive function is Eabled; Enumeration: 'enable': 1, 'disable': 0.
                     hwMplsOamL2vcAutoProlEn 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.13 integer read-only
0: disable; 1: enable; Enumeration: 'enable': 1, 'disable': 0.
                     hwMplsOamL2vcAutoOvertime 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.14 integer32 read-only
If the oam receives CV/FFD, it records the parameters included in the packet, such as OAM type and frequency. If the oam does not receive any CV/FFD packet before the timer expires, It will send BDI with dLOCV defect.
                     hwMplsOamL2vcValid 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.15 integer read-only
1: stop detect; 2: start detect; 3: ready. Enumeration: 'ready': 3, 'start': 2, 'stop': 1.
                     hwMplsOamL2vcAvaState 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.16 integer read-only
0: available state; 1: unavailable state. Enumeration: 'available': 0, 'unavailable': 1.
                     hwMplsOamL2vcDefectType 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.17 integer read-only
0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect.; 6: dExcess, Receiving excess rate of CV/FFD; 7: dUnknown, Unknown defect in the MPLS network. 8: dOamFail, AutoProtocal timer expires. 9: PW-down, PW down. Enumeration: 'dOamFail': 8, 'dUnknown': 7, 'pw-down': 9, 'dExcess': 6, 'dServer': 1, 'dPeerMe': 2, 'dLOCV': 3, 'dTTSI-Mismatch': 4, 'dTTSI-Mismerge': 5, 'nondefect': 0.
                     hwMplsOamL2vcBdiDefectType 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.18 integer read-only
0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect.; 6: dExcess, Receiving excess rate of CV/FFD; 7: dUnknown, Unknown defect in the MPLS network. 8: dOamFail, AutoProtocal timer expires. Enumeration: 'dOamFail': 8, 'dUnknown': 7, 'dExcess': 6, 'dServer': 1, 'dPeerMe': 2, 'dLOCV': 3, 'dTTSI-Mismatch': 4, 'dTTSI-Mismerge': 5, 'nondefect': 0.
                     hwMplsOamL2vcRowStatus 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.30 rowstatus read-only
This variable is used to create, modify, and delete a row in this table.
                     hwMplsOamL2vcCompatibilityMode 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.31 integer read-only
1: Ptn-Mode; 2: RouterMode; Valid only for the l2vc configuration. Enumeration: 'ptnMode': 1, 'routerMode': 2.
                     hwMplsOamL2vcBDIFreq 1.3.6.1.4.1.2011.5.12.7.1.1.6.1.32 integer read-only
BDI is generated at the trail termination source point of a return path in response to a defect detected at the trail termination sink point of an LSP in the forwarding direction. The frequency of BDI can be set by user. 1: per-second; 2: same as detect frequency. Enumeration: 'detectFrequency': 2, 'perSecond': 1.
             hwMplsOamBidirectionalTunnelTable 1.3.6.1.4.1.2011.5.12.7.1.1.7 no-access
This table specifies Static Co-Route MPLS OAM capability and associated information, such as DetType and DetFrequence.
                 hwMplsOamBidirectionalTunnelEntry 1.3.6.1.4.1.2011.5.12.7.1.1.7.1 no-access
An entry in this table is created by binding the tunnel ifindex.
                     hwMplsOamBidirectionalTunnelIndex 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.1 unsigned32 no-access
This is a unique index for an OAM entry in the OAM table.
                     hwMplsOamBidirectionalTunnelTunnName 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.2 octet string read-only
The name of a tunnel.
                     hwMplsOamBidirectionalTunnelDetType 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.3 integer read-only
There are two types of OAM packets, CV and FFD. 1: CV; 2: FFD. Enumeration: 'ffd': 2, 'cv': 1.
                     hwMplsOamBidirectionalTunnelDetFreq 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.4 integer read-only
For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms. Any other frequency is wrong. 0: 1000ms(only for cv); 1: 10ms; 2: 20ms; 3: 50ms; 4: 100ms; 5: 200ms; 6: 500ms; 7: 3ms. Enumeration: 'ffd200ms6': 5, 'ffd500ms7': 6, 'cv1000ms': 0, 'ffd3ms8': 7, 'ffd50ms4': 3, 'ffd10ms2': 1, 'ffd100ms5': 4, 'ffd20ms3': 2.
                     hwMplsOamBidirectionalTunnelRevDetType 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.5 integer read-only
0: invalid; 1: CV; 2: FFD. Enumeration: 'ffd': 2, 'cv': 1, 'invalid': 0.
                     hwMplsOamBidirectionalTunnelRevDetFreq 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.6 integer read-only
For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms. Any other frequency is wrong. 0: 1000ms(only for cv); 1: 10ms; 2: 20ms; 3: 50ms; 4: 100ms; 5: 200ms; 6: 500ms; 7: invalid; 8: 3ms. Enumeration: 'ffd200ms6': 5, 'ffd3ms9': 8, 'ffd500ms7': 6, 'cv1000ms': 0, 'invalid8': 7, 'ffd50ms4': 3, 'ffd10ms2': 1, 'ffd100ms5': 4, 'ffd20ms3': 2.
                     hwMplsOamBidirectionalTunnelSendEnable 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.7 integer read-only
0: The OAM Send function is Disabled; 1: The OAM Send function is Eabled; Enumeration: 'enable': 1, 'disable': 0.
                     hwMplsOamBidirectionalTunnelReceiveEnable 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.8 integer read-only
0: The OAM Receive function is Disabled; 1: The OAM Receive function is Eabled; Enumeration: 'enable': 1, 'disable': 0.
                     hwMplsOamBidirectionalTunnelAutoProtocolEnable 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.9 integer read-only
0: disable; 1: enable; Enumeration: 'enable': 1, 'disable': 0.
                     hwMplsOamBidirectionalTunnelAutoOvertime 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.10 integer32 read-only
If the oam receives CV/FFD, it records the parameters included in the packet, such as OAM type and frequency. If the oam does not receive any CV/FFD packet before the timer expires, It will send BDI with dLOCV defect.
                     hwMplsOamBidirectionalTunnelValid 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.11 integer read-only
1: stop detect; 2: start detect; 3: ready. Enumeration: 'ready': 3, 'start': 2, 'stop': 1.
                     hwMplsOamBidirectionalTunnelAvaState 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.12 integer read-only
0: available state; 1: unavailable state. Enumeration: 'available': 0, 'unavailable': 1.
                     hwMplsOamBidirectionalTunnelDefectType 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.13 integer read-only
0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect.; 6: dExcess, Receiving excess rate of CV/FFD; 7: dUnknown, Unknown defect in the MPLS network. 8: dOamFail, AutoProtocal timer expires. 9: corouteDown, coroute down. Enumeration: 'dOamFail': 8, 'dUnknown': 7, 'dExcess': 6, 'dServer': 1, 'dPeerMe': 2, 'dLOCV': 3, 'dTTSI-Mismatch': 4, 'dTTSI-Mismerge': 5, 'corouteDown': 9, 'nondefect': 0.
                     hwMplsOamBidirectionalTunnelBdiDefectType 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.14 integer read-only
0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect.; 6: dExcess, Receiving excess rate of CV/FFD; 7: dUnknown, Unknown defect in the MPLS network. 8: dOamFail, AutoProtocal timer expires. Enumeration: 'dOamFail': 8, 'dUnknown': 7, 'dExcess': 6, 'dServer': 1, 'dPeerMe': 2, 'dLOCV': 3, 'dTTSI-Mismatch': 4, 'dTTSI-Mismerge': 5, 'nondefect': 0.
                     hwMplsOamBidirectionalTunnelRowStatus 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.15 rowstatus read-only
This variable is used to create, modify, and delete a row in this table.
                     hwMplsOamBidirectionalTunnelCompatibilityMode 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.16 integer read-only
1: Ptn-Mode; 2: RouterMode; Valid only for the bidirectional tunnel configuration. Enumeration: 'ptnMode': 1, 'routerMode': 2.
                     hwMplsOamBidirectionalTunnelBDIFreq 1.3.6.1.4.1.2011.5.12.7.1.1.7.1.17 integer read-only
BDI is generated at the trail termination source point of a return path in response to a defect detected at the trail termination sink point of an LSP in the forwarding direction. The frequency of BDI can be set by user. 1: per-second; 2: same as detect frequency. Enumeration: 'detectFrequency': 2, 'perSecond': 1.
             hwMplsOamTrapOpen 1.3.6.1.4.1.2011.5.12.7.1.1.8 unsigned32 read-write
0: disable 1: enable
         hwMplsOamNotifications 1.3.6.1.4.1.2011.5.12.7.1.2
             hwMplsOamIgrLSPOutDefect 1.3.6.1.4.1.2011.5.12.7.1.2.1
This notification is generated when the LSP is found not in the defect state at the LSP ingress.
             hwMplsOamIgrLSPInDefect 1.3.6.1.4.1.2011.5.12.7.1.2.2
This notification is generated when the LSP is found in the defect state at the LSP ingress.
             hwMplsOamIgrLSPAva 1.3.6.1.4.1.2011.5.12.7.1.2.3
This notification is generated when the LSP is found in the available state at the LSP ingress.
             hwMplsOamIgrLSPUnAva 1.3.6.1.4.1.2011.5.12.7.1.2.4
This notification is generated when the LSP is found in the unavailable state at the LSP ingress.
             hwMplsOamEgrLSPOutDefect 1.3.6.1.4.1.2011.5.12.7.1.2.5
This notification is generated when the LSP is found not in the defect state at the LSP egress.
             hwMplsOamEgrLSPInDefect 1.3.6.1.4.1.2011.5.12.7.1.2.6
This notification is generated when the LSP is found in the defect state at the LSP egress.
             hwMplsOamEgrLSPAva 1.3.6.1.4.1.2011.5.12.7.1.2.7
This notification is generated when the LSP is found in the available state at the LSP egress.
             hwMplsOamEgrLSPUnAva 1.3.6.1.4.1.2011.5.12.7.1.2.8
This notification is generated when the LSP is found in the unavailable state at the LSP egress.
             hwMplsOamEgrFirstPkt 1.3.6.1.4.1.2011.5.12.7.1.2.9
If autoprotocol is enabled, this notification is generated when egress receives the first CV/FFD packet.
             hwMplsOamEgrAutoProFDI 1.3.6.1.4.1.2011.5.12.7.1.2.10
The FDI packet is used by the upstream node in an LSP to inform the egress of the defect information. It is also generated when the auto protocol is enabled, with which the LSP ingress notifies the egress to stop the OAM detection.
             hwMplsOamEgrRlsnDown 1.3.6.1.4.1.2011.5.12.7.1.2.11
This notification is generated when the Rlsn is down.
             hwMplsOamL2vcOutDefect 1.3.6.1.4.1.2011.5.12.7.1.2.12
This notification is generated when the PW is found not in the defect state.
             hwMplsOamL2vcInDefect 1.3.6.1.4.1.2011.5.12.7.1.2.13
This notification is generated when the PW is found not in the defect state.
             hwMplsOamL2vcAva 1.3.6.1.4.1.2011.5.12.7.1.2.14
This notification is generated when the PW is found in the unavailable state.
             hwMplsOamL2vcUnAva 1.3.6.1.4.1.2011.5.12.7.1.2.15
This notification is generated when the PW is found in the unavailable state.
             hwMplsOamBidirectionalTunnelOutDefect 1.3.6.1.4.1.2011.5.12.7.1.2.16
This notification is generated when the CO-ROUTE is found not in the defect state.
             hwMplsOamBidirectionalTunnelInDefect 1.3.6.1.4.1.2011.5.12.7.1.2.17
This notification is generated when the CO-ROUTE is found not in the defect state.
             hwMplsOamBidirectionalTunnelAva 1.3.6.1.4.1.2011.5.12.7.1.2.18
This notification is generated when the CO-ROUTE is found in the unavailable state.
             hwMplsOamBidirectionalTunnelUnAva 1.3.6.1.4.1.2011.5.12.7.1.2.19
This notification is generated when the CO-ROUTE is found in the unavailable state.