HUAWEI-LswQos-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-LswQos-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, HUAWEI-3COM-OID-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwLswQosAclMib 1.3.6.1.4.1.2011.2.23.1.16
Module node for qos and acl.
       hwLswQosMibObject 1.3.6.1.4.1.2011.2.23.1.16.2
           hwPriorityTrustMode 1.3.6.1.4.1.2011.2.23.1.16.2.1 integer read-write
Priority type of inbound queue. Enumeration: 'default': 0, 'cos': 3, 'localprecedence': 4, 'dscp': 1, 'ipprecedence': 2.
           hwPortMonitorBothIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.2 integer read-write
The ifIndex of in/out monitor port.
           hwQueueTable 1.3.6.1.4.1.2011.2.23.1.16.2.3 no-access
Queue table which contains queue entry.
               hwQueueEntry 1.3.6.1.4.1.2011.2.23.1.16.2.3.1 no-access
The configuration information of queue.
                   hwQueueIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.1 integer read-only
ifIndex of port.
                   hwQueueScheduleMode 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.2 integer read-write
The mode of the queue schedule. Enumeration: 'rr': 7, 'sp': 1, 'wrr-max-delay': 3, 'hq-wrr': 9, 'wrr': 2, 'wfq': 8, 'sc-1': 5, 'sc-0': 4, 'sc-2': 6.
                   hwQueueWeight1 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.3 integer read-write
If queue mode is wfq, then hwQueueWeight1 represent the bandwidth of queue 1. If queue mode is wrr, then hwQueueWeight1 represent the weight of queue 1.
                   hwQueueWeight2 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.4 integer read-write
If queue mode is wfq, then hwQueueWeight2 represent the bandwidth of queue 2. If queue mode is wrr, then hwQueueWeight2 represent the weight of queue 2.
                   hwQueueWeight3 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.5 integer read-write
If queue mode is wfq, then hwQueueWeight3 represent the bandwidth of queue 3. If queue mode is wrr, then hwQueueWeight3 represent the weight of queue 3.
                   hwQueueWeight4 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.6 integer read-write
If queue mode is wfq, then hwQueueWeight4 represent the bandwidth of queue 4. If queue mode is wrr, then hwQueueWeight4 represent the weight of queue 4.
                   hwQueueMaxDelay 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.7 integer read-write
                   hwQueueWeight5 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.8 integer read-write
If queue mode is wfq, then hwQueueWeight5 represent the bandwidth of queue 5. If queue mode is wrr, then hwQueueWeight5 represent the weight of queue 5.
                   hwQueueWeight6 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.9 integer read-write
If queue mode is wfq, then hwQueueWeight6 represent the bandwidth of queue 6. If queue mode is wrr, then hwQueueWeight6 represent the weight of queue 6.
                   hwQueueWeight7 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.10 integer read-write
If queue mode is wfq, then hwQueueWeight7 represent the bandwidth of queue 7. If queue mode is wrr, then hwQueueWeight7 represent the weight of queue 7.
                   hwQueueWeight8 1.3.6.1.4.1.2011.2.23.1.16.2.3.1.11 integer read-write
If queue mode is wfq, then hwQueueWeight8 represent the bandwidth of queue 8. If queue mode is wrr, then hwQueueWeight8 represent the weight of queue 8.
           hwRateLimitTable 1.3.6.1.4.1.2011.2.23.1.16.2.4 no-access
Rate limit table which contains limit entry.
               hwRateLimitEntry 1.3.6.1.4.1.2011.2.23.1.16.2.4.1 no-access
The configuration information of the rate-limited port.
                   hwRateLimitAclIndex 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.1 integer read-only
Index of acl rule.
                   hwRateLimitIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.2 integer read-only
ifIndex of the rate-limited port.
                   hwRateLimitVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.3 integer read-only
Vlan ID.
                   hwRateLimitDirection 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.4 integer read-only
Direction of the rate-limited port. Enumeration: 'input': 1, 'invalid': 0, 'output': 2.
                   hwRateLimitUserAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.5 integer read-only
The number of user acl.
                   hwRateLimitUserAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.6 integer read-only
The number of user acl-rule.
                   hwRateLimitIpAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.7 integer read-only
The number of Ip acl.
                   hwRateLimitIpAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.8 integer read-only
The number of Ip acl-rule.
                   hwRateLimitLinkAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.9 integer read-only
The number of link acl.
                   hwRateLimitLinkAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.10 integer read-only
The number of link acl-rule.
                   hwRateLimitTargetRateMbps 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.11 integer read-only
Target rate: Mbps.
                   hwRateLimitTargetRateKbps 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.12 integer read-only
Target rate: Kbps.
                   hwRateLimitPeakRate 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.13 integer read-only
Peak rate of the rate-limited port.
                   hwRateLimitCIR 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.14 integer read-only
CIR of the rate-limited port.
                   hwRateLimitCBS 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.15 integer read-only
Burst traffic of the rate-limited port.
                   hwRateLimitEBS 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.16 integer read-only
Excess burst traffic of the rate-limited port.
                   hwRateLimitPIR 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.17 integer read-only
PIR of the rate-limited port.
                   hwRateLimitConformLocalPre 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.18 integer read-only
Conform local pre.
                   hwRateLimitConformActionType 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.19 integer read-only
Conform action type. Enumeration: 'remark-drop-priority': 2, 'remark-dscp': 5, 'remark-policed-service': 4, 'invalid': 0, 'remark-cos-drop-priority': 3, 'remark-cos': 1.
                   hwRateLimitExceedActionType 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.20 integer read-only
Exceed action type. Enumeration: 'forward': 1, 'exceed-cos': 4, 'drop': 2, 'remarkdscp': 3, 'invalid': 0.
                   hwRateLimitExceedDscp 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.21 integer read-only
Exceed DSCP. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
                   hwRateLimitRuntime 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.22 truthvalue read-only
Runtime.
                   hwRateLimitRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.23 rowstatus read-only
RowStatus, now support three status: createAndGo, active, destroy.
                   hwRateLimitExceedCos 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.24 integer read-only
Exceeding COS of rate-limited port.
                   hwRateLimitConformCos 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.25 integer read-only
If the user choose remark-cos value of the hwRateLimitConformActionType, This object can be used to set the conform COS value. There are a few enumerations as follows: background Specify background priority(1) best-effort Specify best-effort priority(0) controlled-load Specify controlled-load priority(4) excellent-effort Specify excellent-effort priority(3) network-management Specify network-management priority(7) spare Specify spare priority(2) video Specify video priority(5) voice Specify voice priority(6)
                   hwRateLimitConformDscp 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.26 integer read-only
If the user choose remark-dscp value of the hwRateLimitConformActionType, This object can be used to set the conform dscp value. There are a few enumerations as follows: <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
                   hwRateLimitMeterStatByteCount 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.27 counter64 read-only
The counter of conform byte.
                   hwRateLimitMeterStatByteXCount 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.28 counter64 read-only
The counter of exceed byte.
                   hwRateLimitMeterStatState 1.3.6.1.4.1.2011.2.23.1.16.2.4.1.29 integer read-only
The status of meter statistic. Enumeration: 'reset': 3, 'running': 4, 'set': 1, 'notRunning': 5, 'unDo': 2.
           hwPriorityTable 1.3.6.1.4.1.2011.2.23.1.16.2.5 no-access
The priority table which contains priority entry.
               hwPriorityEntry 1.3.6.1.4.1.2011.2.23.1.16.2.5.1 no-access
The configuration information of priority.
                   hwPriorityAclIndex 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.1 integer read-only
Index of acl rule.
                   hwPriorityIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.2 integer read-only
ifIndex of the port.
                   hwPriorityVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.3 integer read-only
Vlan ID.
                   hwPriorityDirection 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.4 integer read-only
Direction of data stream. Enumeration: 'input': 1, 'invalid': 0, 'output': 2.
                   hwPriorityUserAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.5 integer read-only
The number of user acl.
                   hwPriorityUserAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.6 integer read-only
The subitem of the user acl.
                   hwPriorityIpAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.7 integer read-only
The number of Ip acl.
                   hwPriorityIpAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.8 integer read-only
The subitem of the IP acl.
                   hwPriorityLinkAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.9 integer read-only
The number of Link acl.
                   hwPriorityLinkAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.10 integer read-only
The subitem of the link acl.
                   hwPriorityDscp 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.11 integer read-only
Set DSCP Value. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
                   hwPriorityIpPre 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.12 integer read-only
Set Ip precedence.
                   hwPriorityIpPreFromCos 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.13 truthvalue read-only
Set Ip precedence according to vlan priority.
                   hwPriorityCos 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.14 integer read-only
Set vlan priority.
                   hwPriorityCosFromIpPre 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.15 truthvalue read-only
Set vlan priority according to IP precedence.
                   hwPriorityLocalPre 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.16 integer read-only
Set local precedence.
                   hwPriorityPolicedServiceType 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.17 integer read-only
The service type of proliced Priority. Enumeration: 'auto': 1, 'trust-dscp': 2, 'new-dscp': 3, 'invalid': 0, 'untrusted': 4.
                   hwPriorityPolicedServiceDscp 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.18 integer read-only
The service Dscp of proliced Priority.
                   hwPriorityPolicedServiceExp 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.19 integer read-only
The service Exp of proliced Priority.
                   hwPriorityPolicedServiceCos 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.20 integer read-only
The service COS of proliced Priority.
                   hwPriorityPolicedServiceLoaclPre 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.21 integer read-only
The service local pre of proliced Priority.
                   hwPriorityPolicedServiceDropPriority 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.22 integer read-only
The service drop priority of proliced Priority.
                   hwPriorityRuntime 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.23 truthvalue read-only
Is run or not.
                   hwPriorityRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.5.1.24 rowstatus read-only
RowStatus, now support three status: createAndGo, active, destroy.
           hwRedirectTable 1.3.6.1.4.1.2011.2.23.1.16.2.6 no-access
Redirect table which contains rediect entry.
               hwRedirectEntry 1.3.6.1.4.1.2011.2.23.1.16.2.6.1 no-access
Configuration information of redirection.
                   hwRedirectAclIndex 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.1 integer read-only
Index of acl rule.
                   hwRedirectIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.2 integer read-only
ifIndex of port.
                   hwRedirectVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.3 integer read-only
Vlan ID.
                   hwRedirectDirection 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.4 integer read-only
Direction of data stream. Enumeration: 'input': 1, 'invalid': 0, 'output': 2.
                   hwRedirectUserAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.5 integer read-only
The number of the user acl.
                   hwRedirectUserAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.6 integer read-only
The subitem of the user acl.
                   hwRedirectIpAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.7 integer read-only
The num of the IP acl.
                   hwRedirectIpAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.8 integer read-only
The subitem of the IP acl.
                   hwRedirectLinkAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.9 integer read-only
The num of the link acl.
                   hwRedirectLinkAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.10 integer read-only
The subitem of the link acl.
                   hwRedirectToCpu 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.11 truthvalue read-only
Redirect to cpu.
                   hwRedirectToIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.12 integer read-only
The ifIndex of port to be redirect to.
                   hwRedirectToNextHop1 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.13 ipaddress read-only
                   hwRedirectToNextHop2 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.14 ipaddress read-only
                   hwRedirectRuntime 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.15 truthvalue read-only
Is run or not.
                   hwRedirectRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.16 rowstatus read-only
RowStatus, now support three status: createAndGo, active, destroy.
                   hwRedirectToSlotNo 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.17 integer read-only
The slot number to process redirection. Default value is 15. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary.
                   hwRedirectRemarkedDSCP 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.18 integer read-only
DSCP of Policy-Based Routing. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
                   hwRedirectRemarkedPri 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.19 integer read-only
The priority of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
                   hwRedirectRemarkedTos 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.20 integer read-only
The TOS of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
                   hwRedirectToNextHop3 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.21 ipaddress read-only
The third IP address for PBR. Default value is 0xffffffff. When L3plus function is not supported, the default value would be set. The data stream can be redirected to three nexthops at most or one VLAN interface, one nexthop should be set at least if data packets are not redirected to VLAN interface for L3plus redirection function.
                   hwRedirectTargetVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.22 integer read-only
The destination vlan ID for PBR. Default value is 0. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary when no nexthop is set.
                   hwRedirectMode 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.23 integer read-only
The node denotes the strategy adopted by the PBR. If strict-priority is configured, the most preferential IP address is use as redirected nexthop. If the mode is load-balance, any of the three IP addresses will be the nexthop and the traffic distributes in the three direction. Default value is strict-priority. When L3plus function is not supported, the default value would be set. It is optional. Enumeration: 'load-balance': 2, 'strict-priority': 1.
                   hwRedirectToNestedVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.24 integer32 read-only
The nested vlan ID inserted before the original vlan tag. Default value is 0. When the function is not supported, the default value would be set. It is optional.
                   hwRedirectToModifiedVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.6.1.25 integer32 read-only
The new vlan ID replaced the old one. Default value is 0. When the function is not supported, the default value would be set. It is optional.
           hwStatisticTable 1.3.6.1.4.1.2011.2.23.1.16.2.7 no-access
Statistic table which contains statistic entry.
               hwStatisticEntry 1.3.6.1.4.1.2011.2.23.1.16.2.7.1 no-access
Configuration about statistic information.
                   hwStatisticAclIndex 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.1 integer read-only
Index of acl rule.
                   hwStatisticIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.2 integer read-only
ifIndex of port.
                   hwStatisticVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.3 integer read-only
Vlan ID.
                   hwStatisticDirection 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.4 integer read-only
Direction of data stream. Enumeration: 'input': 1, 'invalid': 0, 'output': 2.
                   hwStatisticUserAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.5 integer read-only
The number of the user acl.
                   hwStatisticUserAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.6 integer read-only
The subitem of the user acl.
                   hwStatisticIpAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.7 integer read-only
The number of the IP acl.
                   hwStatisticIpAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.8 integer read-only
The subitem of the IP acl.
                   hwStatisticLinkAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.9 integer read-only
The number of the link acl.
                   hwStatisticLinkAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.10 integer read-only
The subitem of the link acl.
                   hwStatisticRuntime 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.11 truthvalue read-only
Is run or not.
                   hwStatisticPacketCount 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.12 counter64 read-only
The counter of the packets which is matched.
                   hwStatisticByteCount 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.13 counter64 read-only
The counter of the byte which is matched.
                   hwStatisticCountClear 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.14 integer read-write
Clear the counter of the packets. Enumeration: 'cleared': 1, 'nouse': 2.
                   hwStatisticRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.15 rowstatus read-only
RowStatus, now support three status: createAndGo, active, destroy.
                   hwStatisticPacketXCount 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.16 counter64 read-only
The counter of the outprofile packets.
                   hwStatisticByteXCount 1.3.6.1.4.1.2011.2.23.1.16.2.7.1.17 counter64 read-only
The counter of the outprofile bytes.
           hwMirrorTable 1.3.6.1.4.1.2011.2.23.1.16.2.8 no-access
Mirror table which contains mirror entry.
               hwMirrorEntry 1.3.6.1.4.1.2011.2.23.1.16.2.8.1 no-access
Configuration information to be mirrored.
                   hwMirrorAclIndex 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.1 integer read-only
Index of acl rule.
                   hwMirrorIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.2 integer read-only
ifIndex of port.
                   hwMirrorVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.3 integer read-only
Vlan ID.
                   hwMirrorDirection 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.4 integer read-only
Direction of data stream. Enumeration: 'input': 1, 'invalid': 0, 'output': 2.
                   hwMirrorUserAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.5 integer read-only
The number of the user acl.
                   hwMirrorUserAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.6 integer read-only
The subitem of the user acl.
                   hwMirrorIpAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.7 integer read-only
The subitem of the user acl.
                   hwMirrorIpAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.8 integer read-only
The subitem of the IP acl.
                   hwMirrorLinkAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.9 integer read-only
The number of the link acl.
                   hwMirrorLinkAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.10 integer read-only
The subitem of the link acl.
                   hwMirrorToIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.11 integer read-only
The ifIndex of port that to be mirrored to.
                   hwMirrorToCpu 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.12 truthvalue read-only
Mirror to cpu.
                   hwMirrorRuntime 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.13 truthvalue read-only
Is run or not.
                   hwMirrorRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.14 rowstatus read-only
RowStatus, now support three status: createAndGo, active, destroy.
                   hwMirrorToGroup 1.3.6.1.4.1.2011.2.23.1.16.2.8.1.15 integer32 read-only
The destination of stream-based mirroring is the mirroring group.
           hwPortMirrorTable 1.3.6.1.4.1.2011.2.23.1.16.2.9 no-access
Port Mirror.
               hwPortMirrorEntry 1.3.6.1.4.1.2011.2.23.1.16.2.9.1 no-access
Configuration information of port mirroring.
                   hwPortMirrorIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.9.1.1 integer read-only
The ifIndex of mirror port.
                   hwPortMirrorDirection 1.3.6.1.4.1.2011.2.23.1.16.2.9.1.2 integer read-only
The direction of mirror port. Enumeration: 'both': 3, 'out': 2, 'in': 1.
                   hwPortMirrorRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.9.1.3 rowstatus read-only
RowStatus, now support three status: createAndGo, active, destroy.
           hwLineRateTable 1.3.6.1.4.1.2011.2.23.1.16.2.10 no-access
Line Rate.
                 hwLineRateEntry 1.3.6.1.4.1.2011.2.23.1.16.2.10.1 no-access
Configuration information of line-rate port.
                     hwLineRateIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.10.1.1 integer read-only
The ifIndex of port of line rate.
                     hwLineRateDirection 1.3.6.1.4.1.2011.2.23.1.16.2.10.1.2 integer read-only
The direction of line rate. Enumeration: 'out': 2, 'in': 1.
                     hwLineRateValue 1.3.6.1.4.1.2011.2.23.1.16.2.10.1.3 integer read-only
The value of the line-rate.
                     hwLineRateRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.10.1.4 rowstatus read-only
RowStatus, now support three status: createAndGo, active, destroy.
           hwBandwidthTable 1.3.6.1.4.1.2011.2.23.1.16.2.11 no-access
Bandwidth.
                 hwBandwidthEntry 1.3.6.1.4.1.2011.2.23.1.16.2.11.1 no-access
Configuration information of bandwidth of port.
                     hwBandwidthAclIndex 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.1 integer read-only
Index of acl rule.
                     hwBandwidthIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.2 integer read-only
ifIndex of port.
                     hwBandwidthVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.3 integer read-only
Vlan ID.
                     hwBandwidthDirection 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.4 integer read-only
Direction of data stream. Enumeration: 'output': 2, 'invalid': 0.
                     hwBandwidthIpAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.5 integer read-only
The number of Ip acl.
                     hwBandwidthIpAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.6 integer read-only
The subitem of ip acl.
                     hwBandwidthLinkAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.7 integer read-only
The number of link acl.
                     hwBandwidthLinkAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.8 integer read-only
The subitem of link acl.
                     hwBandwidthMinGuaranteedWidth 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.9 integer read-write
The min width which is guaranteed.
                     hwBandwidthMaxGuaranteedWidth 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.10 integer read-write
The max width which is guaranteed.
                     hwBandwidthWeight 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.11 integer read-write
Weight of bandwidth.
                     hwBandwidthRuntime 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.12 truthvalue read-only
Is run or not.
                     hwBandwidthRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.11.1.13 rowstatus read-write
RowStatus, now support three status: createAndGo, active, destroy.
           hwRedTable 1.3.6.1.4.1.2011.2.23.1.16.2.12 no-access
Red table which contains RED entry.
                 hwRedEntry 1.3.6.1.4.1.2011.2.23.1.16.2.12.1 no-access
Configuration information of RED.
                     hwRedAclIndex 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.1 integer read-only
Index of acl rule.
                     hwRedIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.2 integer read-only
ifIndex of port.
                     hwRedVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.3 integer read-only
Vlan ID.
                     hwRedDirection 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.4 integer read-only
Direction of data stream. Enumeration: 'output': 2, 'invalid': 0.
                     hwRedIpAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.5 integer read-only
The num of Ip acl.
                     hwRedIpAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.6 integer read-only
The subitem of Ip acl.
                     hwRedLinkAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.7 integer read-only
The number of link acl.
                     hwRedLinkAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.8 integer read-only
The subitem of link acl.
                     hwRedStartQueueLen 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.9 integer read-write
The length of Starting queue.
                     hwRedStopQueueLen 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.10 integer read-write
The length of stopping queue.
                     hwRedProbability 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.11 integer read-write
Probability.
                     hwRedRuntime 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.12 truthvalue read-only
Is run or not.
                     hwRedRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.12.1.13 rowstatus read-write
RowStatus, now support three status: createAndGo, active, destroy.
           hwMirrorGroupTable 1.3.6.1.4.1.2011.2.23.1.16.2.13 no-access
Mirror Group.
                 hwMirrorGroupEntry 1.3.6.1.4.1.2011.2.23.1.16.2.13.1 no-access
Configuration information of mirroring group.
                     hwMirrorGroupID 1.3.6.1.4.1.2011.2.23.1.16.2.13.1.1 integer read-only
Group ID of mirroring group.
                     hwMirrorGroupDirection 1.3.6.1.4.1.2011.2.23.1.16.2.13.1.2 integer read-write
Direction of data stream which would be mirrored. Enumeration: 'input': 1, 'output': 2.
                     hwMirrorGroupMirrorIfIndexList 1.3.6.1.4.1.2011.2.23.1.16.2.13.1.3 octet string read-write
ifIndex list of source port.
                     hwMirrorGroupMonitorIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.13.1.4 integer read-write
ifIndex of destination port.
                     hwMirrorGroupRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.13.1.5 rowstatus read-write
RowStatus, now support three status: createAndGo, active, destroy.
           hwFlowtempTable 1.3.6.1.4.1.2011.2.23.1.16.2.14 no-access
Flow-template table which contains flow-template entry.
                 hwFlowtempEntry 1.3.6.1.4.1.2011.2.23.1.16.2.14.1 no-access
Configuration information of flow-template.
                     hwFlowtempIndex 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.1 integer read-only
Index of flow template. Enumeration: 'default': 1, 'user-defined': 2.
                     hwFlowtempIpProtocol 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.2 truthvalue read-only
protocol-type of IP packet.
                     hwFlowtempTcpFlag 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.3 truthvalue read-only
The flag of Tcp paceket.
                     hwFlowtempSPort 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.4 truthvalue read-only
The port of source.
                     hwFlowtempDPort 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.5 truthvalue read-only
The port of destination.
                     hwFlowtempIcmpType 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.6 truthvalue read-only
The type of Icmp.
                     hwFlowtempIcmpCode 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.7 truthvalue read-only
The code of Icmp.
                     hwFlowtempFragment 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.8 truthvalue read-only
The flag of Fragment.
                     hwFlowtempDscp 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.9 truthvalue read-only
Dscp of IP packet.
                     hwFlowtempIpPre 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.10 truthvalue read-only
The Precedence of Ip packet.
                     hwFlowtempTos 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.11 truthvalue read-only
Tos of IP packet.
                     hwFlowtempSIp 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.12 truthvalue read-only
The Ip of source.
                     hwFlowtempSIpMask 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.13 ipaddress read-only
The mask of source-Ip.
                     hwFlowtempDIp 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.14 truthvalue read-only
The Ip of destination.
                     hwFlowtempDIpMask 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.15 ipaddress read-only
The mask of destination-Ip.
                     hwFlowtempEthProtocol 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.16 truthvalue read-only
Protocol type of Ethernet.
                     hwFlowtempSMac 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.17 truthvalue read-only
The Mac of source.
                     hwFlowtempSMacMask 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.18 macaddress read-only
The mask of source-Mac.
                     hwFlowtempDMac 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.19 truthvalue read-only
The mac of destination.
                     hwFlowtempDMacMask 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.20 macaddress read-only
The mask of destination-Mac.
                     hwFlowtempVpn 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.21 truthvalue read-only
Vpn
                     hwFlowtempRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.22 rowstatus read-only
RowStatus, now support three status: createAndGo, active, destroy.
                     hwFlowtempVlanId 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.23 truthvalue read-only
Source VLAN ID.
                     hwFlowtempCos 1.3.6.1.4.1.2011.2.23.1.16.2.14.1.24 truthvalue read-only
802.1P priority.
           hwFlowtempEnableTable 1.3.6.1.4.1.2011.2.23.1.16.2.15 no-access
The table of flow-template.
                 hwFlowtempEnableEntry 1.3.6.1.4.1.2011.2.23.1.16.2.15.1 no-access
Enable entry of flow-template.
                     hwFlowtempEnableIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.15.1.1 integer read-only
ifIndex of port.
                     hwFlowtempEnableVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.15.1.2 integer read-only
Vlan ID.
                     hwFlowtempEnableFlowtempIndex 1.3.6.1.4.1.2011.2.23.1.16.2.15.1.3 integer read-write
The index of Flowtemp table. Enumeration: 'default': 1, 'user-defined': 2.
           hwTrafficShapeTable 1.3.6.1.4.1.2011.2.23.1.16.2.16 no-access
The traffic-shape table which contains traffic-shape entry.
                 hwTrafficShapeEntry 1.3.6.1.4.1.2011.2.23.1.16.2.16.1 no-access
Configuration information of traffic-shape.
                     hwTrafficShapeIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.16.1.1 integer read-only
IfIdex of port.
                     hwTrafficShapeQueueId 1.3.6.1.4.1.2011.2.23.1.16.2.16.1.2 integer read-only
ID of queue which would be shaped.
                     hwTrafficShapeMaxRate 1.3.6.1.4.1.2011.2.23.1.16.2.16.1.3 integer read-only
The max rate.
                     hwTrafficShapeBurstSize 1.3.6.1.4.1.2011.2.23.1.16.2.16.1.4 integer read-only
The size of burst.
                     hwTrafficShapeBufferLimit 1.3.6.1.4.1.2011.2.23.1.16.2.16.1.5 integer read-only
The limit of buffer.
                     hwTrafficShapeRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.16.1.6 rowstatus read-only
RowStatus, now support three status: createAndGo, active, destroy.
           hwPortQueueTable 1.3.6.1.4.1.2011.2.23.1.16.2.17 no-access
The port-queue table which contains port-queue entry.
                 hwPortQueueEntry 1.3.6.1.4.1.2011.2.23.1.16.2.17.1 no-access
Configuration information of port-queue.
                     hwPortQueueIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.17.1.1 integer read-only
ifIndex of port.
                     hwPortQueueQueueID 1.3.6.1.4.1.2011.2.23.1.16.2.17.1.2 integer read-only
ID of port-queue.
                     hwPortQueueWrrPriority 1.3.6.1.4.1.2011.2.23.1.16.2.17.1.3 integer read-write
The priority of Wrr. Enumeration: 'wrr-high-priority': 2, 'sp': 1, 'wrr-low-priority': 3.
                     hwPortQueueWeight 1.3.6.1.4.1.2011.2.23.1.16.2.17.1.4 integer read-write
The weight of this queue.
           hwDropModeTable 1.3.6.1.4.1.2011.2.23.1.16.2.18 no-access
The drop-mode table which contains drop-mode entry.
                 hwDropModeEntry 1.3.6.1.4.1.2011.2.23.1.16.2.18.1 no-access
Configuration information of the drop-mode.
                     hwDropModeIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.18.1.1 integer read-only
ifIndex of port.
                     hwDropModeMode 1.3.6.1.4.1.2011.2.23.1.16.2.18.1.2 integer read-write
Mode. Enumeration: 'tail-drop': 2, 'random-detect': 1.
                     hwDropModeWredIndex 1.3.6.1.4.1.2011.2.23.1.16.2.18.1.3 integer read-write
The index of Wred table.
           hwWredTable 1.3.6.1.4.1.2011.2.23.1.16.2.19 no-access
The Wred table which contains wred Entry.
                 hwWredEntry 1.3.6.1.4.1.2011.2.23.1.16.2.19.1 no-access
Configuration information of Wred.
                     hwWredIndex 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.1 integer read-only
Index of wred.
                     hwWredQueueId 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.2 integer read-only
Queue ID.
                     hwWredGreenMinThreshold 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.3 integer read-write
The min threshold of Green.
                     hwWredGreenMaxThreshold 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.4 integer read-write
The max threshold of Greem.
                     hwWredGreenMaxProb 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.5 integer read-write
The max prob of Green.
                     hwWredYellowMinThreshold 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.6 integer read-write
The min threshold of Yellow.
                     hwWredYellowMaxThreshold 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.7 integer read-write
The max threshold of Yellow.
                     hwWredYellowMaxProb 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.8 integer read-write
The Prob threshold of Yellow.
                     hwWredRedMinThreshold 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.9 integer read-write
The min threshold of Red.
                     hwWredRedMaxThreshold 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.10 integer read-write
The max threshold of Red.
                     hwWredRedMaxProb 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.11 integer read-write
The max prob of Red.
                     hwWredExponent 1.3.6.1.4.1.2011.2.23.1.16.2.19.1.12 integer read-write
Exponent.
           hwCosToLocalPrecedenceMapTable 1.3.6.1.4.1.2011.2.23.1.16.2.20 no-access
Table of map of the COS to local-precedence.
                 hwCosToLocalPrecedenceMapEntry 1.3.6.1.4.1.2011.2.23.1.16.2.20.1 no-access
Configuration information of map of the COS to local precedence.
                     hwCosToLocalPrecedenceMapCosIndex 1.3.6.1.4.1.2011.2.23.1.16.2.20.1.1 integer read-only
Index of the map.
                     hwCosToLocalPrecedenceMapLocalPrecedenceValue 1.3.6.1.4.1.2011.2.23.1.16.2.20.1.2 integer read-write
Value of local precedence.
           hwCosToDropPrecedenceMapTable 1.3.6.1.4.1.2011.2.23.1.16.2.21 no-access
The table of map of COS to drop-precedence.
                 hwCosToDropPrecedenceMapEntry 1.3.6.1.4.1.2011.2.23.1.16.2.21.1 no-access
Configuration information of the map of the COS to drop-precedence.
                     hwCosToDropPrecedenceMapCosIndex 1.3.6.1.4.1.2011.2.23.1.16.2.21.1.1 integer read-only
Index of the map.
                     hwCosToDropPrecedenceMapDropPrecedenceValue 1.3.6.1.4.1.2011.2.23.1.16.2.21.1.2 integer read-write
Value of drop-precedence.
           hwDscpMapTable 1.3.6.1.4.1.2011.2.23.1.16.2.22 no-access
Table of dscp map.
                 hwDscpMapEntry 1.3.6.1.4.1.2011.2.23.1.16.2.22.1 no-access
Configuration information of Dscp map.
                     hwDscpMapConformLevel 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.1 integer read-only
Conformable level of Dscp-map.
                     hwDscpMapDscpIndex 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.2 integer read-only
Index of dscp.
                     hwDscpMapDscpValue 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.3 integer read-write
Value of Dscp.
                     hwDscpMapExpValue 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.4 integer read-write
Exp value.
                     hwDscpMapCosValue 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.5 integer read-write
COS value.
                     hwDscpMapLocalPrecedence 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.6 integer read-write
The precedence of local.
                     hwDscpMapDropPrecedence 1.3.6.1.4.1.2011.2.23.1.16.2.22.1.7 integer read-write
The precedence of Drop.
           hwExpMapTable 1.3.6.1.4.1.2011.2.23.1.16.2.23 no-access
The table of Exp-map
                 hwExpMapEntry 1.3.6.1.4.1.2011.2.23.1.16.2.23.1 no-access
Configuration information of Exp-map.
                     hwExpMapConformLevel 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.1 integer read-only
Conformable level of Exp-map.
                     hwExpMapExpIndex 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.2 integer read-only
Index of Exp.
                     hwExpMapDscpValue 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.3 integer read-write
Dscp value.
                     hwExpMapExpValue 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.4 integer read-write
Exp value.
                     hwExpMapCosValue 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.5 integer read-write
COS Value.
                     hwExpMapLocalPrecedence 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.6 integer read-write
The precedence of local.
                     hwExpMapDropPrecedence 1.3.6.1.4.1.2011.2.23.1.16.2.23.1.7 integer read-write
The precedence of Drop.
           hwLocalPrecedenceMapTable 1.3.6.1.4.1.2011.2.23.1.16.2.24 no-access
The table of local-precedence map.
                 hwLocalPrecedenceMapEntry 1.3.6.1.4.1.2011.2.23.1.16.2.24.1 no-access
Configuraion information of local-precedence map.
                     hwLocalPrecedenceMapConformLevel 1.3.6.1.4.1.2011.2.23.1.16.2.24.1.1 integer read-only
Conformable level of local-precedence map.
                     hwLocalPrecedenceMapLocalPrecedenceIndex 1.3.6.1.4.1.2011.2.23.1.16.2.24.1.2 integer read-write
Index of local-precedence.
                     hwLocalPrecedenceMapCosValue 1.3.6.1.4.1.2011.2.23.1.16.2.24.1.3 integer read-write
COS value.
           hwPortWredTable 1.3.6.1.4.1.2011.2.23.1.16.2.25 no-access
The table of PortWred.
                 hwPortWredEntry 1.3.6.1.4.1.2011.2.23.1.16.2.25.1 no-access
Configuration information of port Wred.
                     hwPortWredIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.25.1.1 integer read-only
ifIndex of port.
                     hwPortWredQueueID 1.3.6.1.4.1.2011.2.23.1.16.2.25.1.2 integer read-only
ID of port-Wred queue.
                     hwPortWredQueueStartLength 1.3.6.1.4.1.2011.2.23.1.16.2.25.1.3 integer read-write
Queue length.
                     hwPortWredQueueProbability 1.3.6.1.4.1.2011.2.23.1.16.2.25.1.4 integer read-write
Probability.
           hwMirroringGroupTable 1.3.6.1.4.1.2011.2.23.1.16.2.26 no-access
The table of MirrorGroup.
                 hwMirroringGroupEntry 1.3.6.1.4.1.2011.2.23.1.16.2.26.1 no-access
Configuration information of MirrorGroup.
                     hwMirroringGroupID 1.3.6.1.4.1.2011.2.23.1.16.2.26.1.1 integer no-access
GroupID.
                     hwMirroringGroupType 1.3.6.1.4.1.2011.2.23.1.16.2.26.1.2 integer read-only
GroupType. Enumeration: 'remote-source': 2, 'remote-destination': 3, 'local': 1.
                     hwMirroringGroupStatus 1.3.6.1.4.1.2011.2.23.1.16.2.26.1.3 integer read-only
MirroringGroup status. Enumeration: 'active': 1, 'inactive': 2.
                     hwMirroringGroupRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.26.1.4 rowstatus read-only
RowStatus, Now support three status: createAndGo, active, destroy.
           hwMirroringGroupMirrorTable 1.3.6.1.4.1.2011.2.23.1.16.2.27 no-access
MirroringGroup mirroring-port information.
                 hwMirroringGroupMirrorEntry 1.3.6.1.4.1.2011.2.23.1.16.2.27.1 no-access
MirroringGroup mirroring-port information.
                     hwMirroringGroupMirrorInboundIfIndexList 1.3.6.1.4.1.2011.2.23.1.16.2.27.1.1 octet string read-only
Inbound-Mirror ifIndex(for port) and slot number(for board) list. Example A describes the relation between values of hwMirroringGroupMirrorInboundIfIndexList and hwMirroringGroupMirrorInTypeList. Example A: hwMirroringGroupMirrorInboundIfIndexList: '00000002 0C000022 00000007' hwMirroringGroupMirrorInTypeList: '00000002 00000001 00000002' Every four octets represent an integer value. The first four octets of them should be same. Here the value '00000002' indicates there are two inbound mirror sources. The following every four octets of hwMirroringGroupMirrorInboundIfIndexList indicate an ifIndex or a slot number of mirror source. For '0C000022' and '00000007' in the value of hwMirroringGroupMirrorInboundIfIndexList above, the corresponding value of hwMirroringGroupMirrorInTypeList is '00000001' and '00000002'(00000001 means the mirror source is port, 00000002 means the mirror source is board, the meaning reference the object HwMirrorOrMonitorType), then '0C000022' indicates an ifIndex value 201326626(decimal), and '00000007' indicates a slot with number 7(decimal). Values with different types(port/board) should be set in separate set operations. If one value with port type and one value with board type are set with same hwMirroringGroupID separately, the result of get operation for that entry will be like the example A above. If hwMirroringGroupMirrorInTypeList is not supported, the first four octets of hwMirroringGroupMirrorInboundIfIndexList also indicates the number of mirror source, but the following octets are values for ifIndex(port type). hwMirroringGroupMirrorOutboundIfIndexList and hwMirroringGroupMirrorOutTypeList are a pair and have the same relations like hwMirroringGroupMirrorInboundIfIndexList and hwMirroringGroupMirrorInTypeList pair.
                     hwMirroringGroupMirrorOutboundIfIndexList 1.3.6.1.4.1.2011.2.23.1.16.2.27.1.2 octet string read-only
Outbound-Mirror ifIndex and slot number list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList.
                     hwMirroringGroupMirrorRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.27.1.3 rowstatus read-only
RowStatus, now support three status: createAndGo, active, destroy.
                     hwMirroringGroupMirrorInTypeList 1.3.6.1.4.1.2011.2.23.1.16.2.27.1.4 octet string read-only
Inbound-Mirror type list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList.
                     hwMirroringGroupMirrorOutTypeList 1.3.6.1.4.1.2011.2.23.1.16.2.27.1.5 octet string read-only
Outbound-Mirror type list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList.
           hwMirroringGroupMonitorTable 1.3.6.1.4.1.2011.2.23.1.16.2.28 no-access
MirroringGroup monitor-port information.
                 hwMirroringGroupMonitorEntry 1.3.6.1.4.1.2011.2.23.1.16.2.28.1 no-access
MirroringGroup monitor-port information.
                     hwMirroringGroupMonitorIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.28.1.1 integer read-only
If the monitor destination is port, the value means the ifIndex of this port. If the monitor destination is board, the value means the slot number of the board. Whether the value means ifIndex or slot number references the object hwMirroringGroupMonitorType.
                     hwMirroringGroupMonitorRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.28.1.2 rowstatus read-only
RowStatus, now support three status: createAndGo, active, destroy.
                     hwMirroringGroupMonitorType 1.3.6.1.4.1.2011.2.23.1.16.2.28.1.3 hwmirrorormonitortype read-only
Specify whether the monitor destination is port or board. If this object is not supported, then the value of hwMirroringGroupMonitorIfIndex means ifIndex.
           hwMirroringGroupReflectorTable 1.3.6.1.4.1.2011.2.23.1.16.2.29 no-access
MirroringGroup reflector-port information.
                 hwMirroringGroupReflectorEntry 1.3.6.1.4.1.2011.2.23.1.16.2.29.1 no-access
MirroringGroup reflector-port information.
                     hwMirroringGroupReflectorIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.29.1.1 integer read-only
Only valid for remote-source MirroringGroup.
                     hwMirroringGroupReflectorRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.29.1.2 rowstatus read-only
RowStatus, now support three status: createAndGo, active, destroy.
           hwMirroringGroupRprobeVlanTable 1.3.6.1.4.1.2011.2.23.1.16.2.30 no-access
MirroringGroup rprobe-vlan information.
                 hwMirroringGroupRprobeVlanEntry 1.3.6.1.4.1.2011.2.23.1.16.2.30.1 no-access
MirroringGroup rprobe-vlan information.
                     hwMirroringGroupRprobeVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.30.1.1 integer read-only
Remote-Probe vlanID. 0 is invalid value. Only valid for remote-source and remote-destination MirroringGroup.
                     hwMirroringGroupRprobeVlanRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.30.1.2 rowstatus read-only
RowStatus, now support three status: createAndGo, active, destroy.
           hwMirroringGroupMirrorMacTable 1.3.6.1.4.1.2011.2.23.1.16.2.31 no-access
MirroringGroup MAC information.
                 hwMirroringGroupMirrorMacEntry 1.3.6.1.4.1.2011.2.23.1.16.2.31.1 no-access
MirroringGroup MAC information.
                     hwMirroringGroupMirrorMacSeq 1.3.6.1.4.1.2011.2.23.1.16.2.31.1.1 integer32 no-access
The sequence MAC number of the same group.
                     hwMirroringGroupMirrorMac 1.3.6.1.4.1.2011.2.23.1.16.2.31.1.2 macaddress read-only
The MAC address of the MirroringGroup.
                     hwMirrorMacVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.31.1.3 integer32 read-only
The vlan ID of MAC address .
                     hwMirroringGroupMirroMacStatus 1.3.6.1.4.1.2011.2.23.1.16.2.31.1.4 rowstatus read-only
The status of this conceptual row.
           hwMirroringGroupMirrorVlanTable 1.3.6.1.4.1.2011.2.23.1.16.2.32 no-access
MirroringGroup Vlan Information.
                 hwMirroringGroupMirrorVlanEntry 1.3.6.1.4.1.2011.2.23.1.16.2.32.1 no-access
MirroringGroup Vlan Information.
                     hwMirroringGroupMirrorVlanSeq 1.3.6.1.4.1.2011.2.23.1.16.2.32.1.1 integer32 no-access
The sequence vlan number of the same group.
                     hwMirroringGroupMirrorVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.32.1.2 integer32 read-only
The vlan ID of MirroringGroup.
                     hwMirroringGroupMirrorVlanDirection 1.3.6.1.4.1.2011.2.23.1.16.2.32.1.3 integer read-only
The vlan direction of MirroringGroup. Enumeration: 'inbound': 1, 'both': 3, 'outbound': 2.
                     hwMirroringGroupMirroVlanStatus 1.3.6.1.4.1.2011.2.23.1.16.2.32.1.4 rowstatus read-only
The status of this conceptual row.
           hwPortTrustTable 1.3.6.1.4.1.2011.2.23.1.16.2.33 no-access
Port trust information.
                 hwPortTrustEntry 1.3.6.1.4.1.2011.2.23.1.16.2.33.1 no-access
Port trust information.
                     hwPortTrustIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.33.1.1 integer32 no-access
ifIndex of the port which port trust is configured.
                     hwPortTrustTrustType 1.3.6.1.4.1.2011.2.23.1.16.2.33.1.2 integer read-write
Trust type of port trust. Enumeration: 'cos': 2, 'port': 1, 'dscp': 3.
                     hwPortTrustOvercastType 1.3.6.1.4.1.2011.2.23.1.16.2.33.1.3 integer read-write
Overcast type of port trust. Enumeration: 'noOvercast': 1, 'overcastDSCP': 2, 'overcastCOS': 3.
                     hwPortTrustReset 1.3.6.1.4.1.2011.2.23.1.16.2.33.1.4 integer read-write
This object is used to reset port trust to default value. Read operation is meaningless. Enumeration: 'reset': 1.
           hwRemarkVlanIDTable 1.3.6.1.4.1.2011.2.23.1.16.2.34 no-access
Remark vlan ID information.
                 hwRemarkVlanIDEntry 1.3.6.1.4.1.2011.2.23.1.16.2.34.1 no-access
Remark vlan ID information.
                     hwRemarkVlanIDAclIndex 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.1 integer32 no-access
Action identifier, acl index.
                     hwRemarkVlanIDIfIndex 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.2 integer32 no-access
Action identifier, ifIndex.
                     hwRemarkVlanIDVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.3 integer32 no-access
Action identifier, vlan ID.
                     hwRemarkVlanIDDirection 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.4 integer no-access
Action identifier, direction of data stream. Enumeration: 'input': 1, 'invalid': 0, 'output': 2.
                     hwRemarkVlanIDUserAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.5 integer32 read-only
The number of the user acl.
                     hwRemarkVlanIDUserAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.6 integer32 read-only
The subitem of the user acl.
                     hwRemarkVlanIDIpAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.7 integer32 read-only
The num of the IP acl.
                     hwRemarkVlanIDIpAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.8 integer32 read-only
The subitem of the IP acl.
                     hwRemarkVlanIDLinkAclNum 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.9 integer32 read-only
The num of the link acl.
                     hwRemarkVlanIDLinkAclRule 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.10 integer32 read-only
The subitem of the link acl.
                     hwRemarkVlanIDRemarkVlanID 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.11 integer32 read-only
Remark vlan ID.
                     hwRemarkVlanIDPacketType 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.12 integer read-only
Packet type of the remarked vlan ID. Enumeration: 'untagged': 3, 'all': 1, 'tagged': 2.
                     hwRemarkVlanIDRowStatus 1.3.6.1.4.1.2011.2.23.1.16.2.34.1.13 rowstatus read-only
The status of this conceptual row.
           hwCosToDscpMapTable 1.3.6.1.4.1.2011.2.23.1.16.2.35 no-access
COS to DSCP map information.
                 hwCosToDscpMapEntry 1.3.6.1.4.1.2011.2.23.1.16.2.35.1 no-access
COS to DSCP map information.
                     hwCosToDscpMapCosIndex 1.3.6.1.4.1.2011.2.23.1.16.2.35.1.1 integer32 no-access
COS index of COS to DSCP map.
                     hwCosToDscpMapDscpValue 1.3.6.1.4.1.2011.2.23.1.16.2.35.1.2 integer32 read-write
DSCP value of COS to DSCP map.
                     hwCosToDscpMapReSet 1.3.6.1.4.1.2011.2.23.1.16.2.35.1.3 integer read-write
This object is used to reset COS to DSCP map to default value. Read operation is meaningless. Enumeration: 'reset': 1.
           hwDscpToLocalPreMapTable 1.3.6.1.4.1.2011.2.23.1.16.2.36 no-access
DSCP to Local-precedence map information.
                 hwDscpToLocalPreMapEntry 1.3.6.1.4.1.2011.2.23.1.16.2.36.1 no-access
DSCP to Local-precedence map information.
                     hwDscpToLocalPreMapDscpIndex 1.3.6.1.4.1.2011.2.23.1.16.2.36.1.1 integer32 no-access
DSCP Index of DSCP to Local-precedence map.
                     hwDscpToLocalPreMapLocalPreVal 1.3.6.1.4.1.2011.2.23.1.16.2.36.1.2 integer32 read-write
Local-precedence value of DSCP to Local-precedence map.
                     hwDscpToLocalPreMapReset 1.3.6.1.4.1.2011.2.23.1.16.2.36.1.3 integer read-write
This object is used to reset DSCP to Local-precedence map to default value. Read operation is meaningless. Enumeration: 'reset': 1.
           hwDscpToDropPreMapTable 1.3.6.1.4.1.2011.2.23.1.16.2.37 no-access
DSCP to Drop-precedence map information.
                 hwDscpToDropPreMapEntry 1.3.6.1.4.1.2011.2.23.1.16.2.37.1 no-access
DSCP to Drop-precedence map information.
                     hwDscpToDropPreMapDscpIndex 1.3.6.1.4.1.2011.2.23.1.16.2.37.1.1 integer32 no-access
DSCP Index of DSCP to Drop-precedence map.
                     hwDscpToDropPreMapDropPreVal 1.3.6.1.4.1.2011.2.23.1.16.2.37.1.2 integer32 read-write
Drop-precedence value of DSCP to Drop-precedence map.
                     hwDscpToDropPreMapReset 1.3.6.1.4.1.2011.2.23.1.16.2.37.1.3 integer read-write
This object is used to reset DSCP to Drop-precedence map to default value. Read operation is meaningless. Enumeration: 'reset': 1.
           hwDscpToCosMapTable 1.3.6.1.4.1.2011.2.23.1.16.2.38 no-access
DSCP to COS map information.
                 hwDscpToCosMapEntry 1.3.6.1.4.1.2011.2.23.1.16.2.38.1 no-access
DSCP to COS map information.
                     hwDscpToCosMapDscpIndex 1.3.6.1.4.1.2011.2.23.1.16.2.38.1.1 integer32 no-access
DSCP index of DSCP to COS map.
                     hwDscpToCosMapCosValue 1.3.6.1.4.1.2011.2.23.1.16.2.38.1.2 integer32 read-write
COS value of DSCP to COS map.
                     hwDscpToCosMapReset 1.3.6.1.4.1.2011.2.23.1.16.2.38.1.3 integer read-write
This object is used to reset DSCP to COS map to default value. Read operation is meaningless. Enumeration: 'reset': 1.
           hwDscpToDscpMapTable 1.3.6.1.4.1.2011.2.23.1.16.2.39 no-access
DSCP to DSCP map information.
                 hwDscpToDscpMapEntry 1.3.6.1.4.1.2011.2.23.1.16.2.39.1 no-access
DSCP to DSCP map information.
                     hwDscpToDscpMapDscpIndex 1.3.6.1.4.1.2011.2.23.1.16.2.39.1.1 integer32 no-access
DSCP index of DSCP to DSCP map.
                     hwDscpToDscpMapDscpValue 1.3.6.1.4.1.2011.2.23.1.16.2.39.1.2 integer32 read-write
DSCP value of DSCP to DSCP map.
                     hwDscpToDscpMapReset 1.3.6.1.4.1.2011.2.23.1.16.2.39.1.3 integer read-write
This object is used to reset DSCP to DSCP map to default value. Read operation is meaningless. Enumeration: 'reset': 1.