HUAWEI-IPDSLAM-INTERFACE-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-IPDSLAM-INTERFACE-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwIpDslamInterface 1.3.6.1.4.1.2011.6.161
The MIB used for configuring the information of the interface including the IP address on it.
         hwIpDslamInterfaceObject 1.3.6.1.4.1.2011.6.161.1
Interface Object.
             hwIpDslamInterfaceTable 1.3.6.1.4.1.2011.6.161.1.1 no-access
This table is used to manage the interface object, such as create, modify and delete. The indexes of this table are hwIpDslamInterfaceType and hwIpDslamInterfaceUnitNum.
                 hwIpDslamInterfaceEntry 1.3.6.1.4.1.2011.6.161.1.1.1 no-access
This table is used to manage the interface object, such as create, modify and delete. The indexes of this entry are hwIpDslamInterfaceType and hwIpDslamInterfaceUnitNum.
                     hwIpDslamInterfaceType 1.3.6.1.4.1.2011.6.161.1.1.1.1 integer no-access
Indicates the interface type. Options: 1. inloopback(1) -the system inner loopback interface 2. null(2) -the NULL interface 3. meth(3) -the ethernet interface for management 4. vlanif(4) -the VLAN interface 5. loopback(5) -the loopback interface 6. tunnel(6) -the tunnel interface Enumeration: 'loopback': 5, 'tunnel': 6, 'vlanif': 4, 'meth': 3, 'null': 2, 'inloopback': 1.
                     hwIpDslamInterfaceUnitNum 1.3.6.1.4.1.2011.6.161.1.1.1.2 integer32 no-access
Indicates the interface unit number. The valid range of its value lies on the interface type.
                     hwIpDslamInterfaceIfIndex 1.3.6.1.4.1.2011.6.161.1.1.1.3 integer32 read-only
A unique value for each interface. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
                     hwIpDslamInterfaceIfName 1.3.6.1.4.1.2011.6.161.1.1.1.4 displaystring read-only
Indicates the interface name.
                     hwIpDslamInterfaceIfDescr 1.3.6.1.4.1.2011.6.161.1.1.1.5 displaystring read-write
Indicates the description of this interface.
                     hwIpDslamInterfaceAdminStatus 1.3.6.1.4.1.2011.6.161.1.1.1.6 integer read-write
Interface admin status Options: 1. up(1) -indicates that the interface is up 2. down(2) -indicates that the interface is down Enumeration: 'down': 2, 'up': 1.
                     hwIpDslamInterfaceRowStatus 1.3.6.1.4.1.2011.6.161.1.1.1.7 rowstatus read-only
Indicates the row status. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating an interface 3. destroy(6) -indicates deleting an interface
             hwIpDslamInterfaceIpTable 1.3.6.1.4.1.2011.6.161.1.2 no-access
This table is used to manage the interface object, such as create, modify and delete. The indexes of this table are hwIpDslamInterfaceIpIfIndex, hwIpDslamInterfaceIpAddressType, hwIpDslamInterfaceIpAddress and hwIpDslamInterfaceIpPfxLen. Make sure that the interface identified by the hwIpDslamInterfaceIpAddress is already created in hwIpDslamInterfaceTable.
                 hwIpDslamInterfaceIpEntry 1.3.6.1.4.1.2011.6.161.1.2.1 no-access
This table is used to manage the interface object, such as create, modify and delete. The indexes of this entry are hwIpDslamInterfaceIpIfIndex, hwIpDslamInterfaceIpAddressType, hwIpDslamInterfaceIpAddress and hwIpDslamInterfaceIpPfxLen. Make sure that the interface identified by the hwIpDslamInterfaceIpAddress is already created in hwIpDslamInterfaceTable.
                     hwIpDslamInterfaceIpIfIndex 1.3.6.1.4.1.2011.6.161.1.2.1.1 integer32 no-access
Indicates which interface the IP address is to be configured. The value of it is same with the hwIpDslamInterfaceIfIndex in hwIpDslamInterfaceTable.
                     hwIpDslamInterfaceIpAddressType 1.3.6.1.4.1.2011.6.161.1.2.1.2 inetaddresstype no-access
The type of the hwIpDslamInterfaceIpAddress address, as defined in the InetAddress MIB. Now only support ipv4(1).
                     hwIpDslamInterfaceIpAddress 1.3.6.1.4.1.2011.6.161.1.2.1.3 inetaddress no-access
The IP address of the interface. The type of this address is determined by the value of the hwIpDslamInterfaceIpAddressType object.
                     hwIpDslamInterfaceIpPfxLen 1.3.6.1.4.1.2011.6.161.1.2.1.4 inetaddressprefixlength no-access
If hwIpDslamInterfaceIpAddressType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object hwIpDslamInterfaceIpAddress. Otherwise this value is irrelevant and should be ignored.
                     hwIpDslamInterfaceIpFlag 1.3.6.1.4.1.2011.6.161.1.2.1.5 integer read-only
Indicates the flag of the IP address. Options: 1. primary(1) -indicates that this IP address is the primary IP address of the interface 2. secondary(2) -indicates that this IP address is the primary IP address of the interface. One interface may have one primary IP address, and several secondary IP addresses. Enumeration: 'primary': 1, 'secondary': 2.
                     hwIpDslamInterfaceIpMethod 1.3.6.1.4.1.2011.6.161.1.2.1.6 integer read-only
Interface IP address acquiring method. Options: 1. static(1) -indicates the address was manually configured 2. dhcp(2) -indicates the address was assigned by a DHCP server Enumeration: 'dhcp': 2, 'static': 1.
                     hwIpDslamInterfaceIpRowStatus 1.3.6.1.4.1.2011.6.161.1.2.1.7 rowstatus read-only
Indicates the row status. Options: 1. active(1) -indicates query operation 2. createAndGo(4) -indicates creating an IP address 3. destroy(6) -indicates deleting an IP address
             hwIpDslamInterfacePriorityTable 1.3.6.1.4.1.2011.6.161.1.3 no-access
This table is used to config the priority marked for the packet send from the VLAN interface. The index of this table is hwIpDslamInterfacePriorityIfIndex.
                 hwIpDslamInterfacePriorityEntry 1.3.6.1.4.1.2011.6.161.1.3.1 no-access
This table is used to config the priority marked for the packet send from the VLAN interface. The index of this entry is hwIpDslamInterfacePriorityIfIndex.
                     hwIpDslamInterfacePriorityIfIndex 1.3.6.1.4.1.2011.6.161.1.3.1.1 integer32 no-access
Indicates which interface the priority is to be configured on. The value of it is same with the hwIpDslamInterfaceIfIndex in hwIpDslamInterfaceTable.
                     hwIpDslamInterfacePriorityDefaultDscp 1.3.6.1.4.1.2011.6.161.1.3.1.2 integer32 read-write
The DSCP value for all packet. A value of -1 indicates that it has not been configured. In that case, the DSCP in packet will use the value of 0.
                     hwIpDslamInterfacePriorityDscpForDhcp 1.3.6.1.4.1.2011.6.161.1.3.1.3 integer32 read-write
The DSCP value for DHCP packet. A value of -1 indicates that it has not been configured. In that case, the DSCP for DHCP packet will use the value of hwIpDslamInterfacePriorityDefaultDscp.
                     hwIpDslamInterfacePriorityDscpForRoutingPkt 1.3.6.1.4.1.2011.6.161.1.3.1.4 integer32 read-write
The DSCP value for routing-protocol packet. A value of -1 indicates that it has not been configured. In that case, the DSCP for routing-protocol packet will use the value of hwIpDslamInterfacePriorityDefaultDscp.
                     hwIpDslamInterfacePriorityDefaultTos 1.3.6.1.4.1.2011.6.161.1.3.1.5 integer32 read-write
The TOS value for all packet. A value of -1 indicates that it has not been configured. In that case, the TOS in packet will use the value of 0.
                     hwIpDslamInterfacePriorityTosForDhcp 1.3.6.1.4.1.2011.6.161.1.3.1.6 integer32 read-write
The TOS value for DHCP packet. A value of -1 indicates that it has not been configured. In that case, the TOS for DHCP packet will use the value of hwIpDslamInterfacePriorityDefaultTos.
                     hwIpDslamInterfacePriorityTosForRoutingPkt 1.3.6.1.4.1.2011.6.161.1.3.1.7 integer32 read-write
The TOS value for routing-protocol packet. A value of -1 indicates that it has not been configured. In that case, the TOS for routing-protocol packet will use the value of hwIpDslamInterfacePriorityDefaultTos.