HUAWEI-IMA-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-IMA-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwImaMIB 1.3.6.1.4.1.2011.5.25.176
The MIB is mainly used to configure Inverse Multiplexing for ATM (IMA) interfaces.
         hwImaMibObjects 1.3.6.1.4.1.2011.5.25.176.1
             hwImaGroupTable 1.3.6.1.4.1.2011.5.25.176.1.1 no-access
The IMA Group Configuration table.
                 hwImaGroupEntry 1.3.6.1.4.1.2011.5.25.176.1.1.1 no-access
An entry in the IMA Group table.
                     hwImaGroupIfIndex 1.3.6.1.4.1.2011.5.25.176.1.1.1.1 interfaceindex read-only
This object identifies the logical interface number ('ifIndex') assigned to this IMA group, and is used to identify corresponding rows in the Interfaces MIB. Note that re-initialization of the management agent may cause a client's 'hwImaGroupIfIndex' to change.
                     hwImaGroupNeState 1.3.6.1.4.1.2011.5.25.176.1.1.1.2 imagroupstate read-only
The current operational state of the near-end IMA Group State Machine.
                     hwImaGroupFeState 1.3.6.1.4.1.2011.5.25.176.1.1.1.3 imagroupstate read-only
The current operational state of the far-end IMA Group State Machine.
                     hwImaGroupSymmetry 1.3.6.1.4.1.2011.5.25.176.1.1.1.4 imagroupsymmetry read-only
Symmetry of the IMA group.
                     hwImaGroupMinNumTxLinks 1.3.6.1.4.1.2011.5.25.176.1.1.1.5 integer32 read-only
Minimum number of transmit links required to be Active for the IMA group to be in the Operational state.
                     hwImaGroupMinNumRxLinks 1.3.6.1.4.1.2011.5.25.176.1.1.1.6 integer32 read-only
Minimum number of receive links required to be Active for the IMA group to be in the Operational state.
                     hwImaGroupTxTimingRefLink 1.3.6.1.4.1.2011.5.25.176.1.1.1.7 interfaceindexorzero read-only
The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer. The distinguished value of zero may be used if no link has been configured in the IMA group, or if the transmit timing reference link has not yet been selected.
                     hwImaGroupRxTimingRefLink 1.3.6.1.4.1.2011.5.25.176.1.1.1.8 interfaceindexorzero read-only
The ifIndex of the receive timing reference link to be used by near-end for IMA data cell clock recovery toward the ATM layer. The distinguished value of zero may be used if no link has been configured in the IMA group, or if the receive timing reference link has not yet been detected.
                     hwImaGroupTxImaId 1.3.6.1.4.1.2011.5.25.176.1.1.1.9 integer32 read-only
The IMA ID currently in use by the near-end IMA function.
                     hwImaGroupRxImaId 1.3.6.1.4.1.2011.5.25.176.1.1.1.10 integer32 read-only
The IMA ID currently in use by the far-end IMA function.
                     hwImaGroupTxFrameLength 1.3.6.1.4.1.2011.5.25.176.1.1.1.11 imaframelength read-only
The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup.
                     hwImaGroupRxFrameLength 1.3.6.1.4.1.2011.5.25.176.1.1.1.12 imaframelength read-only
Value of IMA frame length as received from remote IMA function.
                     hwImaGroupDiffDelayMax 1.3.6.1.4.1.2011.5.25.176.1.1.1.13 milliseconds read-only
The maximum number of milliseconds of differential delay among the links that will be tolerated on this interface.
                     hwImaGroupAlphaValue 1.3.6.1.4.1.2011.5.25.176.1.1.1.14 integer32 read-only
This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state.
                     hwImaGroupBetaValue 1.3.6.1.4.1.2011.5.25.176.1.1.1.15 integer32 read-only
This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state.
                     hwImaGroupGammaValue 1.3.6.1.4.1.2011.5.25.176.1.1.1.16 integer32 read-only
This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA Sync state from the IMA PreSync state.
                     hwImaGroupNumTxActLinks 1.3.6.1.4.1.2011.5.25.176.1.1.1.17 gauge32 read-only
The number of links which are configured to transmit and are currently Active in this IMA group.
                     hwImaGroupNumRxActLinks 1.3.6.1.4.1.2011.5.25.176.1.1.1.18 gauge32 read-only
The number of links which are configured to receive and are currently Active in this IMA group.
                     hwImaGroupTxOamLabelValue 1.3.6.1.4.1.2011.5.25.176.1.1.1.19 integer32 read-only
IMA OAM Label value transmitted by the NE IMA unit.
                     hwImaGroupRxOamLabelValue 1.3.6.1.4.1.2011.5.25.176.1.1.1.20 integer32 read-only
IMA OAM Label value transmitted by the FE IMA unit. The value 0 likely means that the IMA unit has not received an OAM Label from the FE IMA unit at this time.
                     hwImaGroupFirstLinkIfIndex 1.3.6.1.4.1.2011.5.25.176.1.1.1.21 interfaceindex read-only
This object identifies the first link of this IMA Group.
             hwImaLinkTable 1.3.6.1.4.1.2011.5.25.176.1.2 no-access
The IMA group Link Status and Configuration table.
                 hwImaLinkEntry 1.3.6.1.4.1.2011.5.25.176.1.2.1 no-access
An entry in the IMA Group Link table.
                     hwImaLinkIfIndex 1.3.6.1.4.1.2011.5.25.176.1.2.1.1 interfaceindex no-access
This corresponds to the 'ifIndex' of the MIB-II interface on which this link is established. This object also corresponds to the logical number ('ifIndex') assigned to this IMA link.
                     hwImaLinkGroupIfIndex 1.3.6.1.4.1.2011.5.25.176.1.2.1.2 interfaceindex read-only
This object identifies the logical interface number ('ifIndex') assigned to this IMA group. The specified link will be bound to this IMA group.
                     hwImaLinkNeTxState 1.3.6.1.4.1.2011.5.25.176.1.2.1.3 imalinkstate read-only
The current state of the near-end transmit link.
                     hwImaLinkNeRxState 1.3.6.1.4.1.2011.5.25.176.1.2.1.4 imalinkstate read-only
The current state of the near-end receive link.
                     hwImaLinkFeTxState 1.3.6.1.4.1.2011.5.25.176.1.2.1.5 imalinkstate read-only
The current state of the far-end transmit link as reported via ICP cells.
                     hwImaLinkFeRxState 1.3.6.1.4.1.2011.5.25.176.1.2.1.6 imalinkstate read-only
The current state of the far-end receive link as reported via ICP cells.
                     hwImaLinkRowStatus 1.3.6.1.4.1.2011.5.25.176.1.2.1.51 rowstatus read-only
The hwImaLinkRowStatus object allows create, change, and delete operations on hwImaLinkTable entries. To create a new conceptual row (or instance) of the hwImaLinkTable, hwImaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'. A successful set of the imaLinkGroupIndex object must be performed before the hwImaLinkRowStatus of a new conceptual row can be set to 'active'. To change (modify) the imaLinkGroupIndex in an hwImaLinkTable entry, the hwImaLinkRowStatus object must first be set to 'notInService'. Only then can this object in the conceptual row be modified. This is due to the fact that the imaLinkGroupIndex object provides the association between a physical IMA link and the IMA group to which it belongs, and setting the imaLinkGroupIndex object to a different value has the effect of changing the association between a physical IMA link and an IMA group. To place the link 'in group', the hwImaLinkRowStatus object is set to 'active'. While the row is not in 'active' state, both the Transmit and Receive IMA link state machines are in the 'Not In Group' state. To remove (delete) an hwImaLinkTable entry from this table, set this object to 'destroy'.
         hwImaMibConformance 1.3.6.1.4.1.2011.5.25.176.2
             hwImaMibGroups 1.3.6.1.4.1.2011.5.25.176.2.1
                 hwImaGroupGroup 1.3.6.1.4.1.2011.5.25.176.2.1.1
A set of objects providing configuration and status information for an IMA group definition.
                 hwImaLinkGroup 1.3.6.1.4.1.2011.5.25.176.2.1.2
A set of objects providing status information for an IMA link.
             hwImaMibCompliances 1.3.6.1.4.1.2011.5.25.176.2.2
                 hwImaMibCompliance 1.3.6.1.4.1.2011.5.25.176.2.2.1
The compliance statement for network elements implementing Inverse Multiplexing for ATM (IMA) interfaces.