HUAWEI-IF-EXT-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-IF-EXT-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-MIB, SNMPv2-SMI, HUAWEI-MIB, IP-MIB, ATM-TC-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwIFExtMib 1.3.6.1.4.1.2011.5.25.41
Some attribute of interface extended content, information of interface IP, interface of trunk interface.
       hwIFExtObjects 1.3.6.1.4.1.2011.5.25.41.1
           hwIFExtBase 1.3.6.1.4.1.2011.5.25.41.1.1
               hwIFExtTable 1.3.6.1.4.1.2011.5.25.41.1.1.1 no-access
Interface extended table of private mib.
                   hwIFExtEntry 1.3.6.1.4.1.2011.5.25.41.1.1.1.1 no-access
Entries of private extended interface table.
                       hwIFExtIndex 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.1 interfaceindex no-access
Index of extended table of interface.
                       hwIFExtLayer 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.2 integer read-write
Switch the port between Layer3 and Layer2. Corresponding to the port switch command.Layer2(1) is 1 when the port switch from layer3 to layer2.Layer3(1) is 1 when the port switch from lyaer2 to layer3. Enumeration: 'layer3': 2, 'layer2': 1.
                       hwIFExtFrameType 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.3 integer read-only
Frame type is accepted by VLAN virtual interfaces.Frame format contains ethernetII(1),ethernetII(2),ethernet8022(3),ethernet8023. The type location setting 1 when the ethernetII(1) type is accepted.Now only surpport the first(ethernetII(1)) Enumeration: 'ethernet8023': 4, 'other': 5, 'ethernet8022': 3, 'ethernetII': 1, 'ethernetSnap': 2.
                       hwIFExtFlowStatInterval 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.4 integer32 read-write
Interval of interface flow stat.The value of interval must be divided exactly by 10.The interface interval is effective,when both interface interval and global interval are config.Globle interval is only effective in interfaces,which interface interval is not configured. The real time property of interface flow stat rate will be affected by the value of interval.
                       hwIFExtFlushReceiveEnable 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.5 enabledstatus read-write
Whether or not permit the port to take over FLUSHDUs. Once it is enabled, the port will take over SmartLink FlushDUs from related vlans so as to delete the MAC forwarding table in the local equipment.
                       hwIFExtFlushVlanId 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.6 vlanidornone read-write
The ID of Vlan the port belongs to.When it is 0, it indicates the function of receiving FlushPDU is disabled.
                       hwIFExtFlushPasswd 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.7 snmppasswdstring read-write
A 16-octet read-write value used to define the password for negotiation.
                       hwIFExtFlowStatus 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.8 integer read-only
Current flow status of interface. 1:flow up 2:flow down Enumeration: 'flowUp': 1, 'flowDown': 2.
                       hwIFExtMtu 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.9 integer32 read-write
The Max Transmit Unit of the interface.
                       hwIFExtMacAddr 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.10 physaddress read-write
The MAC address of the interface .
                       hwIFExtBlockPriority 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.11 integer32 read-write
The blocked priority of the interface.
                       hwIFExtMacShift 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.12 integer read-write
The mac-shift state of the interface. 1:normal 2:monitor mac-shift Enumeration: 'macShift': 2, 'normal': 1.
                       hwIFExtSuppressStatus 1.3.6.1.4.1.2011.5.25.41.1.1.1.1.13 integer read-only
The suppress state of the interface. 0:unsuppress 1:suppress Enumeration: 'suppress': 1, 'unsuppress': 0.
               hwIFExtPhyStatus 1.3.6.1.4.1.2011.5.25.41.1.1.2 integer no-access
The physical status of member interface. Enumeration: 'down': 2, 'up': 1.
               hwIFExtMemberOf 1.3.6.1.4.1.2011.5.25.41.1.1.3 displaystring no-access
The description of the main interface which has the membership with the member interface.
               hwLinkModeChangeAutoCreateIfTable 1.3.6.1.4.1.2011.5.25.41.1.1.4 no-access
Interface extended table of private mib.
                   hwLinkModeChangeAutoCreateIfEntry 1.3.6.1.4.1.2011.5.25.41.1.1.4.1 no-access
Entries of private extended interface table.
                       hwAutoIfIndex 1.3.6.1.4.1.2011.5.25.41.1.1.4.1.1 interfaceindex no-access
Index of extended table of interface.
                       hwNewIfTimeslot 1.3.6.1.4.1.2011.5.25.41.1.1.4.1.2 bits read-only
The time slot of the TDM interface: timeslot0(0):The time slot 0 on the TDM interface, timeslot1(1):The time slot 1 on the TDM interface, timeslot2(2):The time slot 2 on the TDM interface, timeslot3(3):The time slot 3 on the TDM interface, timeslot4(4):The time slot 4 on the TDM interface, timeslot5(5):The time slot 5 on the TDM interface, timeslot6(6):The time slot 6 on the TDM interface, timeslot7(7):The time slot 7 on the TDM interface, timeslot8(8):The time slot 8 on the TDM interface, timeslot9(9):The time slot 9 on the TDM interface, timeslot10(10):The time slot 10 on the TDM interface, timeslot11(11):The time slot 11 on the TDM interface, timeslot12(12):The time slot 12 on the TDM interface, timeslot13(13):The time slot 13 on the TDM interface, timeslot14(14):The time slot 14 on the TDM interface, timeslot15(15):The time slot 15 on the TDM interface, timeslot16(16):The time slot 16 on the TDM interface, timeslot17(17):The time slot 17 on the TDM interface, timeslot18(18):The time slot 18 on the TDM interface, timeslot19(19):The time slot 19 on the TDM interface, timeslot20(20):The time slot 20 on the TDM interface, timeslot21(21):The time slot 21 on the TDM interface, timeslot22(22):The time slot 22 on the TDM interface, timeslot23(23):The time slot 23 on the TDM interface, timeslot24(24):The time slot 24 on the TDM interface, timeslot25(25):The time slot 25 on the TDM interface, timeslot26(26):The time slot 26 on the TDM interface, timeslot27(27):The time slot 27 on the TDM interface, timeslot28(28):The time slot 28 on the TDM interface, timeslot29(29):The time slot 29 on the TDM interface, timeslot30(30):The time slot 30 on the TDM interface, timeslot31(31):The time slot 31 on the TDM interface. Bits: 'timeslot4': 4, 'timeslot5': 5, 'timeslot6': 6, 'timeslot7': 7, 'timeslot0': 0, 'timeslot1': 1, 'timeslot2': 2, 'timeslot3': 3, 'timeslot8': 8, 'timeslot9': 9, 'timeslot30': 30, 'timeslot31': 31, 'timeslot18': 18, 'timeslot19': 19, 'timeslot16': 16, 'timeslot17': 17, 'timeslot14': 14, 'timeslot15': 15, 'timeslot12': 12, 'timeslot13': 13, 'timeslot10': 10, 'timeslot11': 11, 'timeslot27': 27, 'timeslot26': 26, 'timeslot25': 25, 'timeslot24': 24, 'timeslot23': 23, 'timeslot22': 22, 'timeslot21': 21, 'timeslot20': 20, 'timeslot29': 29, 'timeslot28': 28.
               hwIFExtPhyNumber 1.3.6.1.4.1.2011.5.25.41.1.1.5 integer32 read-only
The number of the physical interfaces.
           hwInterfaceIp 1.3.6.1.4.1.2011.5.25.41.1.2
               hwIfIpTable 1.3.6.1.4.1.2011.5.25.41.1.2.1 no-access
Interface IP address configuration table .It contains IP address, IP address mask, IP address acquiring method.
                   hwIfIpEntry 1.3.6.1.4.1.2011.5.25.41.1.2.1.1 no-access
Interface IP address configuration
                       hwIpAdEntAddr 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.1 ipaddress read-only
The IP address to which this entry's addressing information pertains.
                       hwIpAdEntIfIndex 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.2 integer32 read-only
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                       hwIpAdEntNetMask 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.3 ipaddress read-only
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0.
                       hwIpAdEntBcastAddr 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.4 integer32 read-only
The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
                       hwIpAdEntReasmMaxSize 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.5 integer32 read-only
The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagram received on this interface.
                       hwIpAdEntAddressType 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.6 hwipaddresstype read-only
The flag indicates whether the IP address is primary IP address. One interface has only one primary IP address, but can have many sub IP address. So when add a primary IP address to an interface that has already a primary IP address, the new primary address will replace old primary address and the old primary address will be deleted.
                       hwIfIpMethod 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.7 integer read-write
Interface IP address acquiring method. assignedIp(1) indicates that the address was manually configured to a specified address, for example, by user configuration. dhcpIp(2) indicates an address that was assigned to this system by a DHCP server. bootpIp(3) indicates an address that was assigned to this system by the bootp protocol. other(4) indicates an address created by another method. linklayer(5) indicates an address created by IPv6 stateless auto-configuration. random(6) indicates an address chosen by the system at random, for example, an IPv4 address within 169.254/16, or an RFC 3041 privacy address. Enumeration: 'bootpIp': 3, 'random': 6, 'dhcpIp': 2, 'other': 4, 'assignedIp': 1, 'linklayer': 5.
                       hwIpAdEntAddrStatus 1.3.6.1.4.1.2011.5.25.41.1.2.1.1.8 rowstatus read-only
The row status variable.
               hwIfIpUnnumberedTable 1.3.6.1.4.1.2011.5.25.41.1.2.2 no-access
Interface IP address unnumbered table. It contains lend IP address and lend IP address mask.
                   hwIfIpUnnumberedEntry 1.3.6.1.4.1.2011.5.25.41.1.2.2.1 no-access
Interface IP address unnumbered configuration
                       hwUnnumberedIfIndex 1.3.6.1.4.1.2011.5.25.41.1.2.2.1.1 interfaceindex no-access
The index value of the unnumbered interface.
                       hwLendIfIndex 1.3.6.1.4.1.2011.5.25.41.1.2.2.1.11 interfaceindex read-only
The index value of the lend interface.
                       hwLendIpAddr 1.3.6.1.4.1.2011.5.25.41.1.2.2.1.12 ipaddress read-only
The IP address of the lend interface.
                       hwLendIpAddrNetMask 1.3.6.1.4.1.2011.5.25.41.1.2.2.1.13 ipaddress read-only
The IP address mask of the lend interface.
                       hwUnnumberedRowStatus 1.3.6.1.4.1.2011.5.25.41.1.2.2.1.51 rowstatus read-only
The row status variable.
           hwTrunkAttr 1.3.6.1.4.1.2011.5.25.41.1.3
               hwTrunkIfMax 1.3.6.1.4.1.2011.5.25.41.1.3.1 integer32 read-only
The maximum of Trunk interface
               hwTrunkNextIndex 1.3.6.1.4.1.2011.5.25.41.1.3.2 integer32 read-only
The nextindex of Trunk interface,that means its position
               hwTrunkIfTable 1.3.6.1.4.1.2011.5.25.41.1.3.3 no-access
The trunk table.
                   hwTrunkIfEntry 1.3.6.1.4.1.2011.5.25.41.1.3.3.1 no-access
Entries of the trunk table.
                       hwTrunkIndex 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.1 integer32 no-access
The number of the Trunk interface
                       hwTrunkIfID 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.2 integer32 read-only
The identification of the Trunk interface.It may identify Trunk and is an index of the interface.
                       hwTrunkIfType 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.3 integer read-only
The type of the Trunk interface includes eth-trunk and ip-trunk. The ip-trunk is only comprised by pos link, otherwise the eth-trunk is only comprised by ethernet link. Enumeration: 'ethTrunk': 1, 'ipTrunk': 2.
                       hwTrunkIfIndex 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.4 interfaceindex read-only
Index number of the Trunk interface,it is consistent with ifIndex of ifTable in IF-MIB.
                       hwTrunkIfModel 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.5 integer read-only
Participated model of interface load. sourceDesMac(1) and sourceMac(10) and desMac(11) are Layer2 hash arithmetic. Enumeration: 'packetUdp': 3, 'fwdType': 15, 'sourceDesIp': 5, 'sourceMacIpv6': 6, 'sourceMac': 10, 'desIp': 9, 'labelNum': 17, 'sourceIpIpv6': 7, 'packetTcp': 4, 'sourceDesMac': 2, 'label': 18, 'packetAll': 1, 'invalid': -1, 'desPort': 13, 'sourceDesPort': 14, 'sourcePort': 12, 'qos': 16, 'sourceIp': 8, 'desMac': 11.
                       hwTrunkIfBandWidthAffectLinkNum 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.6 integer32 read-only
The max bandwidth-affected-linknumber, by default, an Eth-Trunk interface has a maximum of 16 physical interfaces. The number of physical interfaces in an Eth-Trunk interface varies according to the product type.Only in layer 2,can set this value.
                       hwTrunkIfMinLinkNum 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.7 integer32 read-only
The Trunk port changes to up when the number of the up port reach hwTrunkIfMinLinkNum.
                       hwTrunkIfRowStatus 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.8 rowstatus read-only
Current operation status of the row
                       hwTrunkIfWorkingMode 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.9 integer read-only
Current working mode of trunk. 1:master/backup access mode 2:normal mode 3:lacp static mode Enumeration: 'masterBackup': 1, 'lacpStaticMode': 3, 'normalMode': 2, 'invalid': -1.
                       hwTrunkIfWorkingState 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.10 integer read-only
Current working state of backup-access trunk. 1:general mode working state 2:initialization 3:master working 4:backup working Enumeration: 'generalMode': 1, 'masterWorking': 3, 'initialization': 2, 'backupWorking': 4, 'invalid': -1.
                       hwTrunkIfAutoRecover 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.11 integer read-only
If auto-recover has been set, the master port will be working instead of the other port when it changes from down state to up state. 1: don't support auto-recover 2: support auto-recover Enumeration: 'generalMode': 1, 'autoRecover': 2, 'invalid': -1.
                       hwTrunkIfPreemptEnable 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.12 integer read-only
The preemption according to the priority will be and only be enabled when the lag port is working in static mode(M:N backup mode) In default condition, the preemption is disabled. Enumeration: 'disabled': 2, 'enabled': 1, 'invalid': -1.
                       hwTrunkIfPreemptDelay 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.13 integer32 read-only
The waiting time for priority preemption; Unit: second. It is enabled only when the priority preemption is enabled. It indicates, When it comes to priority preemption, the operation of preemption will be delayed for hwTrunkIfPreemptDelay time.
                       hwTrunkIfTimeoutReceive 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.14 integer read-only
The expired time for the port to receive LACPDUS. There are two types: 1.fast: 3 seconds 2.slow: 90 seconds Enumeration: 'slow': 2, 'invalid': -1, 'fast': 1.
                       hwTrunkIfFlushSendEnable 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.15 integer read-only
Whether or not permit the trunk to transmit FlushDUs.It is only used when it is in the handwork 1:1 mode.Once it is enabled, the newly active interface in the trunk will send SmartLink FlushDUs so as to delete the related MAC forwarding table of the layer2 equipment in network.Otherwise, SmartLink FlushDUs will not be sent. Enumeration: 'disabled': 2, 'enabled': 1, 'invalid': -1.
                       hwTrunkIfFlushVlanId 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.16 integer32 read-only
The ID of Vlan the partner port belongs to.When it is 0, it indicates the function of sending FlushPDU is disabled.
                       hwTrunkIfFlushPasswd 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.17 snmppasswdstring read-only
A 16-octet read-create value used to define the password for negotiation.
                       hwTrunkIfForceSwitchEnable 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.18 integer read-only
It is only used when it is in the handwork 1:1 mode and the current working link is the backup link. At that time, working link will move from backup link to master link. However, if the master link is down, the operation will be forbidden. Enumeration: 'enabled': 1, 'invalid': -1.
                       hwTrunkIfStatReset 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.19 integer read-only
Reset the statistic information of LACPDUsRx,MarkerPDUsRx,LACPDUsTx, MarkerResponsePDUsTx for all the ports in the current trunk. Enumeration: 'reset': 1, 'ready': 2, 'invalid': -1.
                       hwTrunkBandwidth 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.20 integer32 read-only
Current bandwidth of trunk in units of 1,000,000 bits per second. This bandwidth is the peculiar property of Eth-Trunk. And to the other kinds of trunk, this bandwidth is -1.
                       hwTrunkIfArpSendSpeed 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.21 integer32 read-only
Indicates the rate of sending gratuitous ARP packets (in pkts/sec) on the trunk member interface.
                       hwTrunkIfLagSelectedPortStd 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.22 integer read-only
The static mode Eth-trunk selected port standard. There are two types: 1.speed : selected by port's speed 2.priority: selected by port's priority The default type is priority. Enumeration: 'priority': 2, 'speed': 1, 'invalid': -1.
                       hwTrunkIfLagMaxActiveLinkNum 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.23 integer32 read-only
The static mode Eth-trunk selected ports can not more than the value.
                       hwTrunkETrunkPriority 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.24 integer32 read-write
The priority of the E-Trunk.
                       hwTrunkETrunkSysID 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.25 physaddress read-write
The system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default.
                       hwTrunkETrunkPriorityReset 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.26 integer read-write
Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk priority is resetted. Enumeration: 'yes': 1, 'invalid': -1, 'no': 2.
                       hwTrunkETrunkSysIDReset 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.27 integer read-write
Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk system ID is resetted. Enumeration: 'yes': 1, 'invalid': -1, 'no': 2.
                       hwTrunkLocalPrefMode 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.28 integer read-write
Local-preference transmit mode of eth-trunk, there are enable(1) and disable(2).The default value is disable(2). Enumeration: 'enable': 1, 'disable': 2.
                       hwTrunkIfTrackVrrpVrid 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.29 integer32 read-write
The VRID which the static mode Eth-trunk tracked to.
                       hwTrunkIfTrackVrrpIfIndex 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.30 interfaceindex read-write
The VRRP interface which the static mode Eth-trunk tracked to.
                       hwTrunkIfTrackVrrpReset 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.31 integer read-write
Status of operation, there are yes(1) and no(2). The value of this object identifies whether the operation of clearing the configuration is performed. And the configuration is that the Eth-Trunk interface in static LACP mode is associated with an mVRRP backup group. The value yes(1) indicates performing the operation. This object indicates one operation but not one status, so when the operation is performed, the value is no(2). By default, the value is no(2). Enumeration: 'yes': 1, 'invalid': -1, 'no': 2.
                       hwTrunkIfBackupPreemptEnable 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.32 enabledstatus read-write
The preemption according to the master and slave port will be and only be enabled when eth-trunk is working in backup mode. In default condition, the preemption is disabled.
                       hwTrunkIfBackupPreemptDelay 1.3.6.1.4.1.2011.5.25.41.1.3.3.1.33 integer32 read-write
The waiting time for priority preemption; Unit: minute. It is enabled only when the priority preemption is enabled. It indicates, When it comes to priority preemption, the operation of preemption will be delayed for hwTrunkIfBackupPreemptDelay time.
               hwTrunkSystemPriority 1.3.6.1.4.1.2011.5.25.41.1.3.4 integer32 read-write
The priority of the system.
               hwTrunkUnknownUnicastIfModel 1.3.6.1.4.1.2011.5.25.41.1.3.5 integer read-write
Participated model of load for unknown unicast. sourceDesMac(2) and sourceMac(10) and desMac(11) are Layer2 hash arithmetic. Enumeration: 'packetUdp': 3, 'sourceDesIp': 5, 'sourceMacIpv6': 6, 'sourceMac': 10, 'desIp': 9, 'sourceIpIpv6': 7, 'packetTcp': 4, 'sourceDesMac': 2, 'label': 15, 'packetAll': 1, 'desPort': 13, 'sourceDesPort': 14, 'sourcePort': 12, 'ipOrLabel': 16, 'sourceIp': 8, 'desMac': 11.
               hwTrunkETrunkSystemPriority 1.3.6.1.4.1.2011.5.25.41.1.3.6 integer32 read-write
The system priority of the E-Trunk.
               hwTrunkETrunkSystemID 1.3.6.1.4.1.2011.5.25.41.1.3.7 physaddress read-write
The system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default.
           hwTrunkMemAttr 1.3.6.1.4.1.2011.5.25.41.1.4
               hwTrunkMemTable 1.3.6.1.4.1.2011.5.25.41.1.4.1 no-access
Trunk member attribute information table.
                   hwTrunkMemEntry 1.3.6.1.4.1.2011.5.25.41.1.4.1.1 no-access
Trunk member attribute information
                       hwTrunkMemifIndex 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.1 integer32 no-access
Trunk port index
                       hwTrunkValidEntry 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.2 integer read-only
Valid Entries of Trunk interface Enumeration: 'valid': 1, 'invalid': 2.
                       hwTrunkSelectStatus 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.3 integer read-only
Selected Status of Trunk Port.It is used LACP. Enumeration: 'trunkSelected': 1, 'invalid': -1, 'trunkDeselected': 2.
                       hwTrunkLacpStatus 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.4 enabledstatus read-only
It is status of the LACP.
                       hwTrunkDeleteFlag 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.5 enabledstatus read-only
Flag is set trunk_del_enable(1) or trunk_del_disable(2), according to operation.
                       hwTrunkOperstatus 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.6 integer read-only
Status of operation, indicates port status. There are trunk_up(1) and trunk_down(2).It expresses whether port is shutdown. Enumeration: 'down': 2, 'up': 1.
                       hwTrunkIsDefaultLagRecv 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.7 truthvalue read-only
We don't sustain now, default value is false.
                       hwTrunkPortWeight 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.8 unsigned32 read-only
Port weight, it expresses proportion of port in Trunk interface table
                       hwTrunkPortStandby 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.9 unsigned32 read-only
The value is backup of Trunk Port.
                       hwTrunkRowStatus 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.10 rowstatus read-only
Current operation status of the row.
                       hwTrunkPortMaster 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.11 integer read-only
Master port of backup-access eth-trunk or not 1: port-slave 2: port-master Enumeration: 'portMaster': 2, 'invalid': -1, 'portSlave': 1.
                       hwTrunkPortPriority 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.12 integer32 read-only
The priority value assigned to this Trunk Port. This 16-bit value is read-write.
                       hwTrunkPortStatReset 1.3.6.1.4.1.2011.5.25.41.1.4.1.1.13 integer read-only
Reset the statistic information of LACPDUsRx,MarkerPDUsRx,LACPDUsTx, MarkerResponsePDUsTx for the current port. Enumeration: 'reset': 1, 'ready': 2, 'invalid': -1.
           hwIFFlowStat 1.3.6.1.4.1.2011.5.25.41.1.5
               hwIFFlowStatGlobalInterval 1.3.6.1.4.1.2011.5.25.41.1.5.1 integer32 read-write
Global interval of interface flow stat.The interface interval is effective, when both interface interval and global interval are config.Globle interval is only effective in interfaces,which interface interval is not configged. Flow stat rate of interface will be affected by the value of interval. The default value is 300s.
           hwIfStatistics 1.3.6.1.4.1.2011.5.25.41.1.6
               hwIfEtherStatTable 1.3.6.1.4.1.2011.5.25.41.1.6.1 no-access
Ethernet Interface Statistic Table
                   hwIfEtherStatEntry 1.3.6.1.4.1.2011.5.25.41.1.6.1.1 no-access
Entry of Ethernet Interface Statistic Table
                       hwIfEtherStatIfIndex 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.1 interfaceindex no-access
The index of L2 interface
                       hwIfEtherStatInPkts64Octets 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.5 counter64 read-only
The number of recieved Packets whose size over 1518 bytes
                       hwIfEtherStatInPkts65to127Octets 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.6 counter64 read-only
The number of recieved Packets whose size over 1518 bytes
                       hwIfEtherStatInPkts128to255Octets 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.7 counter64 read-only
The number of recieved Packets whose size over 1518 bytes
                       hwIfEtherStatInPkts256to511Octets 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.8 counter64 read-only
The number of recieved Packets whose size over 1518 bytes
                       hwIfEtherStatInPkts512to1023Octets 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.9 counter64 read-only
The number of recieved Packets whose size over 1518 bytes
                       hwIfEtherStatInPkts1024to1518Octets 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.10 counter64 read-only
The number of recieved Packets whose size over 1518 bytes
                       hwIfEtherStatInJumboPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.11 counter64 read-only
The number of recieved Packets whose size over 1518 bytes
                       hwIfEtherStatInCRCPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.12 counter64 read-only
The number of recieved Packets which have CRC checking errors
                       hwIfEtherStatInLongPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.13 counter64 read-only
The number of recieved Packets whose length is over maximum length
                       hwIfEtherStatInJabberPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.14 counter64 read-only
The number of recieved Packets whose length is over maximum length and wrong CRC checking
                       hwIfEtherStatInFragmentPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.15 counter64 read-only
The number of recieved Packets which have short size and wrong CRC checking
                       hwIfEtherStatInUnderSizePkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.16 counter64 read-only
The number of recieved Packets which have short size but right CRC checking
                       hwIfEtherStatInOverRunPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.17 counter64 read-only
The number of recieved Packets whose queue overflow
                       hwIfEtherStatInPausePkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.18 counter64 read-only
The number of recieved control Frames
                       hwIfEtherStatOutJumboPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.19 counter64 read-only
The number of sended Packets whose size over 1518 bytes
                       hwIfEtherStatOutOverflowPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.20 counter64 read-only
The number of Packets whitch happen FIFO overflow error
                       hwIfEtherStatOutUnderRunPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.21 counter64 read-only
The number of Packets whitch happen FIFO empty
                       hwIfEtherStatOutPausePkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.22 counter64 read-only
The number of sended control Frames
                       hwIfEthIfStatReset 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.23 integer read-write
Reset the Statistic information Counter Enumeration: 'reset': 1, 'ready': 2.
                       hwIfEtherStatInDropEventPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.24 counter64 read-only
The number of recieved Packets discarded for GBP full or back pressure discard
                       hwIfEtherStatInAlignmentPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.25 counter64 read-only
The number of recieved Packets which have frame alignment error
                       hwIfEtherStatInSymbolPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.26 counter64 read-only
The number of recieved Packets which have unknown symbols
                       hwIfEtherStatInIgnoredPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.27 counter64 read-only
The number of recieved MAC control frames which have unknown opecode
                       hwIfEtherStatInFramePkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.28 counter64 read-only
The number of recieved frames whose actual length differs with 802.3
                       hwIfEtherStatOutCollisionPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.29 counter64 read-only
The number of sended collision Frames(only happen in the 10/100M port with half duplex mode)
                       hwIfEtherStatOutDeferredPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.30 counter64 read-only
The number of sended deferred but not collision Frames(only happen in the 10/100M port)
                       hwIfEtherStatOutLateCollisionPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.31 counter64 read-only
The number of sended deferred and collision Frames(only happen in the 10/100M port)
                       hwIfEtherStatOutExcessiveCollisionPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.32 counter64 read-only
The number of sended failure Frames whose collision more than 16(only happen in the 10/100M port)
                       hwIfEtherStatOutBufferPurgationPkts 1.3.6.1.4.1.2011.5.25.41.1.6.1.1.33 counter64 read-only
The number of sended Frames which is purged from the buffer because of long time
               hwIfSdhStatTable 1.3.6.1.4.1.2011.5.25.41.1.6.2 no-access
Sdh/sonet Interface Statistic Table
                   hwIfSdhStatEntry 1.3.6.1.4.1.2011.5.25.41.1.6.2.1 no-access
Entry of Sdh/Sonet Interface Statistic Table
                       hwIfSdhStatIfIndex 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.1 interfaceindex no-access
The index of sdh/sonet interface
                       hwIfSdhStatInCRCPkts 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.2 counter64 read-only
The number of recieved Packets which have CRC checking errors
                       hwIfSdhStatInShortPkts 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.3 counter64 read-only
The number of recieved Packets whose length is under minimal length
                       hwIfSdhStatInLongPkts 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.4 counter64 read-only
The number of recieved Packets whose length is over maximum length
                       hwIfSdhStatOutOverRunPkts 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.5 counter64 read-only
The number of sent Packets whose queue overflow
                       hwIfSdhStatOutUnderRunPkts 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.6 counter64 read-only
The number of sent Packets whose queue underflow
                       hwIfSdhIfStatReset 1.3.6.1.4.1.2011.5.25.41.1.6.2.1.7 integer read-write
Reset the Statistic information Counter Enumeration: 'reset': 1, 'ready': 2.
               hwIfAtmStatTable 1.3.6.1.4.1.2011.5.25.41.1.6.3 no-access
Atm Interface Statistic Table
                   hwIfAtmStatEntry 1.3.6.1.4.1.2011.5.25.41.1.6.3.1 no-access
Entry of Atm Interface Statistic Table
                       hwIfAtmStatIfIndex 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.1 interfaceindex no-access
The index of atm interface
                       hwIfAtmStatInGoodCells 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.2 counter64 read-only
The number of good cells recieved
                       hwIfAtmStatInIdleCells 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.3 counter64 read-only
The number of idle cells recieved
                       hwIfAtmStatInCorrectedCells 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.4 counter64 read-only
The number of recieved cells whitch have been corrected.
                       hwIfAtmStatInUncorrectedCells 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.5 counter64 read-only
The number of recieved cells whitch can not be corrected.
                       hwIfAtmStatOutGoodCells 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.6 counter64 read-only
The number of good cells sent
                       hwIfAtmStatOutIdleCells 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.7 counter64 read-only
The number of idle cells sent
                       hwIfAtmIfStatReset 1.3.6.1.4.1.2011.5.25.41.1.6.3.1.8 integer read-write
Reset the Statistic information Counter Enumeration: 'reset': 1, 'ready': 2.
           hwIfMonitorObject 1.3.6.1.4.1.2011.5.25.41.1.7
               hwIfMonitorThresholdTable 1.3.6.1.4.1.2011.5.25.41.1.7.1 no-access
Alarm monitor table
                   hwIfMonitorThresholdEntry 1.3.6.1.4.1.2011.5.25.41.1.7.1.1 no-access
Entry of alarm monitor table
                       hwIfMonitorIndex 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.1 interfaceindex no-access
Index of alarm monitor table
                       hwIfMonitorCrcErrorStatistics 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.2 counter64 read-only
Crc error statistics value
                       hwIfMonitorCrcErrorThreshold 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.3 integer32 read-write
Crc error alarm threshold,default value is 3 and 0 is an invalid value
                       hwIfMonitorCrcErrorInterval 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.4 integer32 read-write
Crc error alarm interval time(unit is second),default value is 10s and 0 is an invalid value
                       hwIfMonitorSdhErrorStatistics 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.5 counter64 read-only
Sdh error statistics value only for B3
                       hwIfMonitorSdhErrorThreshold 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.6 integer32 read-write
Sdh error alarm threshold,only for B3,default value is 3 and 0 is an invalid value
                       hwIfMonitorSdhErrorInterval 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.7 integer32 read-write
Sdh error alarm interval time(unit is second),only for B3,default value is 10s and 0 is an invalid value
                       hwIfMonitorInputRatePercentage 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.8 integer32 read-only
Input rate percentage value
                       hwIfMonitorInputRateThreshold 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.9 integer32 read-write
Input rate alarm threshold,default value is 100
                       hwIfMonitorOutputRatePercentage 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.10 integer32 read-only
Output rate percentage value
                       hwIfMonitorOutputRateThreshold 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.11 integer32 read-write
Output rate alarm threshold,default value is 100
                       hwIfMonitorPauseFrameStatistics 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.12 counter64 read-only
Pause frame statistics value
                       hwIfMonitorPauseFrameThreshold 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.13 integer32 read-write
Pause frame alarm threshold,and 0 is an invalid value
                       hwIfMonitorPauseFrameInterval 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.14 integer32 read-write
Pause frame alarm interval time(unit is second),and 0 is an invalid value
                       hwIfMonitorDelayValue 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.15 integer32 read-write
Delay value
                       hwIfMonitorDelayThreshold 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.16 integer32 read-write
Delay alarm threshold
                       hwIfMonitorJitterValue 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.17 integer32 read-write
Jitter value
                       hwIfMonitorJitterThreshold 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.18 integer32 read-write
Jitter alarm threshold
                       hwIfMonitorName 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.19 displaystring read-only
Interface's name of alarm monitor table
                       hwIfMonitorSdhB1ErrorStatistics 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.20 counter64 read-only
Sdh B1 error statistics value
                       hwIfMonitorSdhB1ErrorThreshold 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.21 integer32 read-write
Sdh B1 error alarm threshold,default value is 3
                       hwIfMonitorSdhB1ErrorInterval 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.22 integer32 read-write
Sdh B1 error alarm interval time(unit is second),default value is 10s
                       hwIfMonitorSdhB2ErrorStatistics 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.23 counter64 read-only
Sdh B2 error statistics value
                       hwIfMonitorSdhB2ErrorThreshold 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.24 integer32 read-write
Sdh error B2 alarm threshold,default value is 3
                       hwIfMonitorSdhB2ErrorInterval 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.25 integer32 read-write
Sdh B2 error alarm interval time(unit is second),default value is 10s
                       hwIfMonitorSymbolErrorStatistics 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.26 counter64 read-only
Symbol error statistics value
                       hwIfMonitorSymbolErrorThreshold 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.27 integer32 read-write
Symbol error alarm threshold,default value is 3
                       hwIfMonitorSymbolErrorInterval 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.28 integer32 read-write
Symbol error alarm interval time(unit is second),default value is 10s
                       hwIfMonitorBadBytesErrorStatistics 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.40 counter64 read-only
Description.
                       hwIfMonitorBadBytesErrorThreshold 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.41 integer32 read-write
Description.
                       hwIfMonitorBadBytesErrorInterval 1.3.6.1.4.1.2011.5.25.41.1.7.1.1.42 integer32 read-write
Description.
           hwIfMonitorGeneral 1.3.6.1.4.1.2011.5.25.41.1.8
               hwIfMonitorCrcEnabledStatus 1.3.6.1.4.1.2011.5.25.41.1.8.1 enabledstatus read-write
Enalbe or disable the crc error monitor, and the default value is disable.
               hwIfMonitorSdhEnabledStatus 1.3.6.1.4.1.2011.5.25.41.1.8.2 enabledstatus read-write
Enalbe or disable the sdh error monitor, and the default value is disable.
               hwIfMonitorInputRateEnabledStatus 1.3.6.1.4.1.2011.5.25.41.1.8.3 enabledstatus read-write
Enalbe or disable the input rate monitor, and the default value is disable.
               hwIfMonitorOutputRateEnabledStatus 1.3.6.1.4.1.2011.5.25.41.1.8.4 enabledstatus read-write
Enalbe or disable the output rate monitor, and the default value is disable.
               hwIfMonitorHalfDuplexEnabledStatus 1.3.6.1.4.1.2011.5.25.41.1.8.5 enabledstatus read-write
Enalbe or disable the half duplex monitor, and the default value is disable.
               hwIfMonitorPauseRisingEnabledStatus 1.3.6.1.4.1.2011.5.25.41.1.8.6 enabledstatus read-write
Enalbe or disable the pause frame rising monitor, and the default value is disable.
               hwIfMonitorPauseContinuingEnabledStatus 1.3.6.1.4.1.2011.5.25.41.1.8.7 enabledstatus read-write
Enalbe or disable the pause frame continuing monitor, and the default value is disable.
               hwifMonitorBadBytesEnabledStatus 1.3.6.1.4.1.2011.5.25.41.1.8.8 enabledstatus read-write
Description.
           hwAdminVrrpMemberIf 1.3.6.1.4.1.2011.5.25.41.1.9
               hwIfFlowChangeTime 1.3.6.1.4.1.2011.5.25.41.1.9.1 integer32 no-access
The time indicates when the interface's flow status changes.
               hwAdminVrrpMemberIfTable 1.3.6.1.4.1.2011.5.25.41.1.9.2 no-access
The interface bound to VRRP table.
                   hwAdminVrrpMemberIfEntry 1.3.6.1.4.1.2011.5.25.41.1.9.2.1 no-access
Entries of the interface bound to VRRP table.
                       hwAdminVrrpMemberIfIndex 1.3.6.1.4.1.2011.5.25.41.1.9.2.1.1 interfaceindex no-access
The number of the interface.
                       hwAdminVrrpVrid 1.3.6.1.4.1.2011.5.25.41.1.9.2.1.2 integer32 read-only
The administrator VRRP vrid.
                       hwAdminVrrpIfIndex 1.3.6.1.4.1.2011.5.25.41.1.9.2.1.3 interfaceindex read-only
The administrator VRRP's configure interface index.
                       hwAdminVrrpMemberIfFlowStatus 1.3.6.1.4.1.2011.5.25.41.1.9.2.1.4 integer read-only
Current flow status of interface. 1:up 2:down Enumeration: 'down': 2, 'up': 1.
                       hwAdminVrrpMemberIfRowStatus 1.3.6.1.4.1.2011.5.25.41.1.9.2.1.5 rowstatus read-only
Current operation status of the row.
           hwIfFluxLimit 1.3.6.1.4.1.2011.5.25.41.1.10
                 hwIfFluxLimitTable 1.3.6.1.4.1.2011.5.25.41.1.10.1 no-access
Flux limit table
                     hwIfFluxLimitEntry 1.3.6.1.4.1.2011.5.25.41.1.10.1.1 no-access
Entry of flux limit table
                         hwIfFluxIfIndex 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.1 interfaceindex no-access
Interface Index, same as ifIndex.
                         hwIfFluxVlanId 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.2 vlanidornone no-access
Vlan ID. 0 is the default value
                         hwIfFluxDirection 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.3 hwdirectiontype read-only
Limit direction: inbound (1) outbound (2)
                         hwIfFluxLimitType 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.4 integer read-only
Flux limit type: broadcastSuppression(1),multicastSuppression(2),unknownUnicastSuppression(3). Enumeration: 'broadcastSuppression': 1, 'unknownUnicastSuppression': 3, 'multicastSuppression': 2.
                         hwIfFluxCir 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.5 integer32 read-only
Committed Information Rate. Unit: kbps. software QoS: 8..155000 hardware QoS: 100..10000000
                         hwIfFluxCbs 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.6 integer32 read-only
Committed Burst Size. Unit: byte software QoS: 1875..19375000 hardware QoS: 64..33554432
                         hwIfFluxRowStatus 1.3.6.1.4.1.2011.5.25.41.1.10.1.1.7 rowstatus read-only
RowStatus. Three actions are used: active, createAndGo, destroy
           hwIfDiffServ 1.3.6.1.4.1.2011.5.25.41.1.11
                 hwIfDiffServTable 1.3.6.1.4.1.2011.5.25.41.1.11.1 no-access
The table describes the different service mode of interfaces.
                     hwIfDiffServEntry 1.3.6.1.4.1.2011.5.25.41.1.11.1.1 no-access
Interface different service mode attribute configuration.
                         hwIfDiffServIndex 1.3.6.1.4.1.2011.5.25.41.1.11.1.1.1 interfaceindex no-access
The index of L2 interface.
                         hwIfDiffServMode 1.3.6.1.4.1.2011.5.25.41.1.11.1.1.2 integer read-only
Different service mode of the interface binding to a VLL, default is uniform. Enumeration: 'pipe': 1, 'shortpipe': 3, 'uniform': 2.
                         hwIfDiffServServiceClass 1.3.6.1.4.1.2011.5.25.41.1.11.1.1.3 integer read-only
PHB in the ingress PE, the value must be be,af1,af2,af3,af4,ef,cs6,cs7. Enumeration: 'be': 1, 'default': 0, 'ef': 6, 'af4': 5, 'cs7': 8, 'cs6': 7, 'af1': 2, 'af2': 3, 'af3': 4.
                         hwIfDiffServColor 1.3.6.1.4.1.2011.5.25.41.1.11.1.1.4 integer read-only
Remarked color of packet in the ingress PE, the value must be green,yellow,red. Enumeration: 'default': 0, 'green': 1, 'red': 3, 'yellow': 2.
           hwIfQuery 1.3.6.1.4.1.2011.5.25.41.1.12
                 hwIfQueryTable 1.3.6.1.4.1.2011.5.25.41.1.12.1 no-access
Interface name table of private MIB.
                     hwIfQueryEntry 1.3.6.1.4.1.2011.5.25.41.1.12.1.1 no-access
Entries of private interface name table.
                         hwIfName 1.3.6.1.4.1.2011.5.25.41.1.12.1.1.1 octet string no-access
The name of the interface.The value of this object must be the interface name assigned by the local device.
                         hwIfIndex 1.3.6.1.4.1.2011.5.25.41.1.12.1.1.2 interfaceindex read-only
The index of the interface. An index uniquely identifies an interface.
           hwLogicIfAttrib 1.3.6.1.4.1.2011.5.25.41.1.13
                 hwLogicIfTable 1.3.6.1.4.1.2011.5.25.41.1.13.1 no-access
Logic interface table.
                     hwLogicIfEntry 1.3.6.1.4.1.2011.5.25.41.1.13.1.1 no-access
Logic interface table.
                         hwLogicIfIndex 1.3.6.1.4.1.2011.5.25.41.1.13.1.1.1 interfaceindexorzero no-access
Indicates the interface index. The interface index to be created must be 0. Then the system automatically allocates an interface index.
                         hwLogicIfMainIndex 1.3.6.1.4.1.2011.5.25.41.1.13.1.1.11 interfaceindexorzero read-only
Indicates the interface index of the main interface to which the sub-interface belongs. For other interfaces, the interface index is 0.
                         hwLogicIfType 1.3.6.1.4.1.2011.5.25.41.1.13.1.1.12 integer read-only
Indicates the interface type. Enumeration: 'wlanEss': 17, 'subEthernet': 6, 've': 1, 'loopback': 2, 'tunnel': 11, 'vlanif': 3, 'subSerial': 10, 'subVe': 4, 'imaGroup': 8, 'mpGroup': 13, 'stackPort': 18, 'dslGroup': 16, 'subAtmTrunk': 15, 'subEthTrunk': 5, 'subImaGroup': 9, 'bridgeIf': 14, 'subAtm': 7.
                         hwLogicIfName 1.3.6.1.4.1.2011.5.25.41.1.13.1.1.13 displaystring read-only
Indicates the interface name. The interface name must be a name without blank spaces and Tab characters.
                         hwLogicIfParaOne 1.3.6.1.4.1.2011.5.25.41.1.13.1.1.14 integer read-only
Indicates the extended attribute of the logical interface. The extended attribute takes effect only on the ATM sub-interface. The default extended attribute is P2MP. For sub-interfaces of other types, none is returned after the Get operation. Enumeration: 'none': 255, 'p2p': 1, 'p2mp': 2.
                         hwLogicIfRowStatus 1.3.6.1.4.1.2011.5.25.41.1.13.1.1.51 rowstatus read-only
Indicates the status of the row.
                 hwLogicIfHelpTable 1.3.6.1.4.1.2011.5.25.41.1.13.2 no-access
Logic interface help table.
                     hwLogicIfHelpEntry 1.3.6.1.4.1.2011.5.25.41.1.13.2.1 no-access
Logic interface help table.
                         hwLogicIfhelpType 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.1 integer read-only
Indicates the types of logical interfaces that can be queried. Enumeration: 'tunnel': 11, 'mp-group': 13, 'ima-Group': 8, 've': 1, 'dslGroup': 16.
                         hwLogicIfChassisNumber 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.2 octet string read-only
Indicates the ID of the chassis that supports the creation of the specified logical interface.
                         hwLogicIfSlotNumber 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.3 octet string read-only
Indicates the ID of the slot that supports the creation of the specified logical interface.
                         hwLogicIfCardNumber 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.4 octet string read-only
Indicates the number of the card that supports the creation of the specified logical interface.
                         hwLogicIfMin 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.5 integer32 read-only
Indicates the minimum port number of the specified logical interface.
                         hwLogicIfMax 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.6 integer32 read-only
Indicates the maximum port number of the specified logical interface.
                         hwLogicIfTotal 1.3.6.1.4.1.2011.5.25.41.1.13.2.1.7 integer32 read-only
Indicates the maximum number of the specified logical interface.
                 hwLogicIfDynamicHelpTable 1.3.6.1.4.1.2011.5.25.41.1.13.3 no-access
Logic interface dynamic help table.
                     hwLogicIfDynamicHelpEntry 1.3.6.1.4.1.2011.5.25.41.1.13.3.1 no-access
Logic interface dynamic help table.
                         hwLogicDynamicIfhelpType 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.1 integer read-only
Indicates the types of logical interfaces that can be queried. Enumeration: 'tunnel': 11, 'mp-group': 13, 'ima-Group': 8, 've': 1, 'dslGroup': 16.
                         hwLogicDynamicIfChassisNumber 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.2 integer32 read-only
Indicates the ID of the chassis that that can be queried.
                         hwLogicDynamicIfSlotNumber 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.3 integer32 read-only
Indicates the ID of the slot that can be queried.
                         hwLogicDynamicIfCardNumber 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.4 integer32 read-only
Indicates the ID of the card that can be queried.
                         hwLogicDynamicIfMin 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.5 integer32 read-only
Indicates the minimum port number of the specified logical interface.
                         hwLogicDynamicIfMax 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.6 integer32 read-only
Indicates the maximum port number of the specified logical interface.
                         hwLogicDynamicIfTotal 1.3.6.1.4.1.2011.5.25.41.1.13.3.1.7 integer32 read-only
Indicates the maximum number of the specified logical interface.
           hwCppsObjects 1.3.6.1.4.1.2011.5.25.41.1.14
                 hwCppsGlobalEnable 1.3.6.1.4.1.2011.5.25.41.1.14.1 enabledstatus read-write
Whether statistic function is enabled globally, and the default value is disable.
                 hwCppsInterfaceTable 1.3.6.1.4.1.2011.5.25.41.1.14.2 no-access
CPU packet and byte statistic interface configuration table.
                     hwCppsInterfaceEntry 1.3.6.1.4.1.2011.5.25.41.1.14.2.1 no-access
The entry of hwCppsInterfaceTable.
                         hwCppsInterfaceIndex 1.3.6.1.4.1.2011.5.25.41.1.14.2.1.1 interfaceindex no-access
Index number of the interface.
                         hwCppsPortPvcEnable 1.3.6.1.4.1.2011.5.25.41.1.14.2.1.2 enabledstatus read-write
Whether statistic function is enabled on PVC.
                         hwCppsPortVlanEnable 1.3.6.1.4.1.2011.5.25.41.1.14.2.1.3 enabledstatus read-write
Whether statistic function is enabled on VLAN.
                 hwCppsIfStatisticsTable 1.3.6.1.4.1.2011.5.25.41.1.14.3 no-access
CPU packet and byte statistic interface table.
                     hwCppsIfStatisticsEntry 1.3.6.1.4.1.2011.5.25.41.1.14.3.1 no-access
The entry of hwCppsIfStatisticsTable.
                         hwCppsIfStatisticsIndex 1.3.6.1.4.1.2011.5.25.41.1.14.3.1.1 interfaceindex no-access
Index number of the interface.
                         hwCppsInterfacePktStatisic 1.3.6.1.4.1.2011.5.25.41.1.14.3.1.2 counter64 read-only
Packet statistic information of the interface sent to CPU.
                         hwCppsInterfaceByteStatisic 1.3.6.1.4.1.2011.5.25.41.1.14.3.1.3 counter64 read-only
Byte statistic information of the interface sent to CPU.
                         hwCppsResetInterfaceStatisic 1.3.6.1.4.1.2011.5.25.41.1.14.3.1.4 integer read-write
Whether to reset statistics. Enumeration: 'reset': 1, 'unreset': 2.
                 hwCppsAtmPvcTable 1.3.6.1.4.1.2011.5.25.41.1.14.4 no-access
CPU packet and byte statistic ATM PVC table.
                     hwCppsAtmPvcEntry 1.3.6.1.4.1.2011.5.25.41.1.14.4.1 no-access
The entry of hwCppsAtmPvcTable.
                         hwCppsAtmIfIndex 1.3.6.1.4.1.2011.5.25.41.1.14.4.1.1 interfaceindex no-access
Index number of the interface.
                         hwCppsAtmVpi 1.3.6.1.4.1.2011.5.25.41.1.14.4.1.2 atmvpidentifier no-access
VPI.
                         hwCppsAtmVci 1.3.6.1.4.1.2011.5.25.41.1.14.4.1.3 atmvcidentifier no-access
VCI.
                         hwCppsAtmPvcPktStatisic 1.3.6.1.4.1.2011.5.25.41.1.14.4.1.4 counter64 read-only
Packet statistic information of the PVC sent to CPU.
                         hwCppsAtmPvcByteStatisic 1.3.6.1.4.1.2011.5.25.41.1.14.4.1.5 counter64 read-only
Byte statistic information of the PVC sent to CPU.
                         hwCppsResetAtmPvcStatisic 1.3.6.1.4.1.2011.5.25.41.1.14.4.1.6 integer read-write
Whether to reset statistics. Enumeration: 'reset': 1, 'unreset': 2.
                 hwCppsPortVlanTable 1.3.6.1.4.1.2011.5.25.41.1.14.5 no-access
CPU packet and byte statistic port VLAN table.
                     hwCppsPortVlanEntry 1.3.6.1.4.1.2011.5.25.41.1.14.5.1 no-access
The entry of hwCppsPortVlanTable.
                         hwCppsPortIndex 1.3.6.1.4.1.2011.5.25.41.1.14.5.1.1 interfaceindex no-access
Index number of the interface.
                         hwCppsVlanId 1.3.6.1.4.1.2011.5.25.41.1.14.5.1.2 vlanidornone no-access
VLAN ID.
                         hwCppsPortVlanPktStatisic 1.3.6.1.4.1.2011.5.25.41.1.14.5.1.3 counter64 read-only
Packet statistic information of the port sent to CPU.
                         hwCppsPortVlanByteStatisic 1.3.6.1.4.1.2011.5.25.41.1.14.5.1.4 counter64 read-only
Byte statistic information of the port sent to CPU.
                         hwCppsResetPortVlanStatisic 1.3.6.1.4.1.2011.5.25.41.1.14.5.1.5 integer read-write
Whether to reset statistics. Enumeration: 'reset': 1, 'unreset': 2.
           hwPortIsolationGroupAttrib 1.3.6.1.4.1.2011.5.25.41.1.15
                 hwPortIsolationGroupTable 1.3.6.1.4.1.2011.5.25.41.1.15.1 no-access
Logic interface table.
                     hwPortIsolationGroupEntry 1.3.6.1.4.1.2011.5.25.41.1.15.1.1 no-access
Logic interface table.
                         hwPortIsolationGroupIndex 1.3.6.1.4.1.2011.5.25.41.1.15.1.1.1 integer32 no-access
ID of Port-Isolation-Group.
                         hwPortIsolationGroupPortList 1.3.6.1.4.1.2011.5.25.41.1.15.1.1.2 portlist read-only
PortList of Port-Isolation-Group.
                         hwPortIsolationGroupRowStatus 1.3.6.1.4.1.2011.5.25.41.1.15.1.1.3 rowstatus read-only
Indicates the status of the row.
           hwVTrunkAttr 1.3.6.1.4.1.2011.5.25.41.1.16
                 hwVTrunkIfTable 1.3.6.1.4.1.2011.5.25.41.1.16.1 no-access
The vtrunk table.
                     hwVTrunkIfEntry 1.3.6.1.4.1.2011.5.25.41.1.16.1.1 no-access
Entries of the vtrunk table.
                         hwVTrunkIfIndex 1.3.6.1.4.1.2011.5.25.41.1.16.1.1.1 interfaceindex no-access
The IfIndex of the VTrunk interface.
                         hwVTrunkIfID 1.3.6.1.4.1.2011.5.25.41.1.16.1.1.2 integer32 read-only
The identification of the VTrunk interface.It may identify VTrunk and is an index of the interface.
                         hwVTrunkIfType 1.3.6.1.4.1.2011.5.25.41.1.16.1.1.3 integer read-only
The type of the VTrunk interface includes pos-Trunk, cpos-Trunk, atm-trunk and atm-bundle. Enumeration: 'cpos-Trunk': 2, 'atm-Trunk': 3, 'pos-Trunk': 1, 'atm-bundle': 4.
                         hwVTrunkIfRowStatus 1.3.6.1.4.1.2011.5.25.41.1.16.1.1.50 rowstatus read-only
Current operation status of the row.
           hwVTrunkMemAttr 1.3.6.1.4.1.2011.5.25.41.1.17
                 hwVTrunkMemTable 1.3.6.1.4.1.2011.5.25.41.1.17.1 no-access
VTrunk member attribute information table.
                     hwVTrunkMemEntry 1.3.6.1.4.1.2011.5.25.41.1.17.1.1 no-access
VTrunk member attribute information.
                         hwVTrunkMemIfIndex 1.3.6.1.4.1.2011.5.25.41.1.17.1.1.1 integer32 no-access
VTrunk port index.
                         hwVTrunkIfnetIndex 1.3.6.1.4.1.2011.5.25.41.1.17.1.1.2 integer32 read-only
The IfnetIndex of the VTrunk interface.
                         hwVTrunkValidEntry 1.3.6.1.4.1.2011.5.25.41.1.17.1.1.3 integer read-only
Valid Entries of VTrunk interface. Enumeration: 'valid': 1, 'invalid': 2.
                         hwVTrunkOperstatus 1.3.6.1.4.1.2011.5.25.41.1.17.1.1.4 integer read-only
Status of operation, indicates port status. There are vtrunk_up(1) and vtrunk_down(2).It expresses whether port is shutdown. Enumeration: 'down': 2, 'up': 1.
                         hwVTrunkPortActive 1.3.6.1.4.1.2011.5.25.41.1.17.1.1.5 integer read-only
Active port of backup-access vtrunk or not 1: portInactive 2: portActive. Enumeration: 'portInactive': 1, 'portActive': 2.
                         hwVTrunkRowStatus 1.3.6.1.4.1.2011.5.25.41.1.17.1.1.50 rowstatus read-only
Current operation status of the row.
           hwMasterBackupTrunkSubinterfaceAttr 1.3.6.1.4.1.2011.5.25.41.1.18
                 hwMasterBackupTrunkSubinterfaceTable 1.3.6.1.4.1.2011.5.25.41.1.18.1 no-access
Master-Backup Trunk Subinterface attribute information table.
                     hwMasterBackupTrunkSubinterfaceEntry 1.3.6.1.4.1.2011.5.25.41.1.18.1.1 no-access
Master-Backup Trunk Subinterface attribute information.
                         hwBackupTrunkIfIndex 1.3.6.1.4.1.2011.5.25.41.1.18.1.1.1 interfaceindex no-access
This object indicates index of master/backup trunk sub-interface.
                         hwBackupStatus 1.3.6.1.4.1.2011.5.25.41.1.18.1.1.2 integer read-only
The value of this object identifies backupStatus of master/backup trunk sub-interface. Enumeration: 'backup': 3, 'init': 1, 'master': 2.
                         hwRevertiveMode 1.3.6.1.4.1.2011.5.25.41.1.18.1.1.3 integer read-write
The value of this object identifies revertive-mode of master/backup trunk sub-interface. Enumeration: 'non-revertive': 2, 'revertive': 1.
                         hwWtrTime 1.3.6.1.4.1.2011.5.25.41.1.18.1.1.4 integer32 read-write
The value of this object identifies the wait-to-restore time of master/backup trunk sub-interface.
                         hwFlushVlanId 1.3.6.1.4.1.2011.5.25.41.1.18.1.1.5 vlanidornone read-write
This object indicates VLAN ID carried in a FlushPDU.
           hwVaspPort 1.3.6.1.4.1.2011.5.25.41.1.19
                 hwVaspPortPeerMacTable 1.3.6.1.4.1.2011.5.25.41.1.19.1 no-access
Vasp port peer MAC table.
                     hwVaspPortPeerMacEntry 1.3.6.1.4.1.2011.5.25.41.1.19.1.1 no-access
Vasp port peer MAC table entry.
                         hwVaspPortIfIndex 1.3.6.1.4.1.2011.5.25.41.1.19.1.1.1 interfaceindex no-access
The index of interface.
                         hwVaspPortName 1.3.6.1.4.1.2011.5.25.41.1.19.1.1.2 displaystring read-only
The name of vasp port.
                         hwVaspPortPeerMac 1.3.6.1.4.1.2011.5.25.41.1.19.1.1.3 physaddress read-only
The peer MAC of port.
           hwIFExtTrapObjects 1.3.6.1.4.1.2011.5.25.41.1.20
                 hwLinkDownReason 1.3.6.1.4.1.2011.5.25.41.1.20.1 integer no-access
The reason code of link changes. Enumeration: 'receiveNakPacket': 5, 'admindown': 16, 'receiveConfAckPacket': 4, 'portAlarmDown': 29, 'pvcDown': 13, 'receiveProtoRejPacket': 9, 'efmSessionFailed': 14, 'adminup': 18, 'interfaceIsDeleted': 25, 'bfdSessionUp': 27, 'receiveTermPacket': 6, 'efmSessionUp': 28, 'dldpIsDown': 30, 'vrrpFlowDown': 32, 'receiveCodeRejPacket': 8, 'keepaliveOutOfTime': 12, 'physicalLinkDown': 1, 'chapAuthenticationFailed': 10, 'protocolup': 19, 'lacpNegotiationFailed': 2, 'papAuthenticationFailed': 11, 'conditionsForActivationAreMet': 23, 'vrrpFlowUp': 33, 'physicalLinkIsUp': 21, 'tunnelDownOrInexist': 15, 'protocoldown': 17, 'tunnelIsUp': 24, 'receiveTermAckPacket': 7, 'dldpIsUp': 31, 'conditionsForActivationNotMet': 22, 'mainifdown': 20, 'bfdSessionDown': 26, 'receiveConfReqPacket': 3.
                 hwMainIfName 1.3.6.1.4.1.2011.5.25.41.1.20.2 displaystring no-access
The main interface name.
                 hwCfmOverPhysicalName 1.3.6.1.4.1.2011.5.25.41.1.20.3 displaystring no-access
The configuration of the interface board or interface card is restored.
       hwIFExtConformance 1.3.6.1.4.1.2011.5.25.41.2
           hwIFExtGroups 1.3.6.1.4.1.2011.5.25.41.2.1
               hwTrunkIfGroup 1.3.6.1.4.1.2011.5.25.41.2.1.1
A collection of objects indicating information of IP address of interface, contain IP address, IP address mask and IP address acquiring method.
               hwIfIpAddressGroup 1.3.6.1.4.1.2011.5.25.41.2.1.2
A collection of objects indicating attribute of the Trunk interface.
               hwIFExtGroup 1.3.6.1.4.1.2011.5.25.41.2.1.3
A collection of objects indicating attribute of interface extended.
               hwTrunkMemGroup 1.3.6.1.4.1.2011.5.25.41.2.1.4
Trunk member attribute Group, now only can set hwTrunkPortWeight and hwTrunkPortStandby. hwTrunkSelectStatus and hwTrunkDeleteFlag can't be set. These attributes are for extend.
               hwIFFlowStatGroup 1.3.6.1.4.1.2011.5.25.41.2.1.5
A collection of objects indicating interval time of interface flow stat.
               hwAdminVrrpMemberIfGroup 1.3.6.1.4.1.2011.5.25.41.2.1.6
A collection of objects indicating attribute of the interface track administrator VRRP.
               hwIfEtherStatGroup 1.3.6.1.4.1.2011.5.25.41.2.1.7
Interface statistic Group.
               hwIfMonitorThresholdGroup 1.3.6.1.4.1.2011.5.25.41.2.1.8
Alarm Monitor Group.
               hwIfMonitorGeneralGroup 1.3.6.1.4.1.2011.5.25.41.2.1.9
Alarm Monitor Enable Group.
               hwIfFluxLimitGroup 1.3.6.1.4.1.2011.5.25.41.2.1.10
Flux limit Group.
               hwIfDiffServGroup 1.3.6.1.4.1.2011.5.25.41.2.1.11
Interface statistic Group.
               hwIfQueryGroup 1.3.6.1.4.1.2011.5.25.41.2.1.12
Interface name Group.
               hwLogicIfAttrGroup 1.3.6.1.4.1.2011.5.25.41.2.1.13
Logic interface table Group.
               hwIfIpUnnumberedGroup 1.3.6.1.4.1.2011.5.25.41.2.1.14
Logic interface table Group.
               hwLinkModeChangeAutoCreateIfGroup 1.3.6.1.4.1.2011.5.25.41.2.1.15
Interface time slot Group.
               hwCppsGlobalEnableGroup 1.3.6.1.4.1.2011.5.25.41.2.1.16
A collection of objects indicating global CPU packet statistic function.
               hwCppsInterfaceGroup 1.3.6.1.4.1.2011.5.25.41.2.1.17
A collection of objects providing interface configuration function.
               hwCppsIfStatisticsGroup 1.3.6.1.4.1.2011.5.25.41.2.1.18
A collection of objects providing packet and byte statistic of the interface sent to CPU.
               hwCppsAtmPvcGroup 1.3.6.1.4.1.2011.5.25.41.2.1.19
A collection of objects providing packet and byte statistic for the pvc sent to CPU.
               hwCppsPortVlanGroup 1.3.6.1.4.1.2011.5.25.41.2.1.20
A collection of objects providing packet and byte statistic for the port sent to CPU.
               hwPortIsolationGroup 1.3.6.1.4.1.2011.5.25.41.2.1.21
Port Isolation Group.
               hwVTrunkIfGroup 1.3.6.1.4.1.2011.5.25.41.2.1.22
VTrunk attribute Group.
               hwVTrunkMemGroup 1.3.6.1.4.1.2011.5.25.41.2.1.23
VTrunk member attribute Group.
               hwLogicIfHelpTableGroup 1.3.6.1.4.1.2011.5.25.41.2.1.24
Logic interface help table Group.
               hwSubInterfaceBackupTrunkGroup 1.3.6.1.4.1.2011.5.25.41.2.1.25
SubInterfaceBackupTrunk attribute Group.
               hwVaspPortGroup 1.3.6.1.4.1.2011.5.25.41.2.1.26
The vasp port group.
               hwLogicIfDynamicHelpTableGroup 1.3.6.1.4.1.2011.5.25.41.2.1.27
Logic interface Dynamic help table Group.
           hwIFExtCompliances 1.3.6.1.4.1.2011.5.25.41.2.2
               hwIFExtCompliance 1.3.6.1.4.1.2011.5.25.41.2.2.1
The compliance statement for entities implementing Huawei extended interface management MIB.
       hwIFExtTraps 1.3.6.1.4.1.2011.5.25.41.3
           hwTrunkWorkingSwitch 1.3.6.1.4.1.2011.5.25.41.3.1
hwTrunkWorkingSwitch. 1.hwTrunkIfID: The identification of the Trunk interface; 2.hwTrunkIfWorkingState: Current working state of backup-access trunk. Index: hwTrunkIndex.
           hwLacpNegotiateFailed 1.3.6.1.4.1.2011.5.25.41.3.2
The member of LAG neither can take over PDU nor transmit PDUs. Send this trap when LACP protocol negotiation fails. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex.
           hwLacpTotalLinkLoss 1.3.6.1.4.1.2011.5.25.41.3.3
Total loss of link bandwidth: it means that there is no member in the LAG group and the trap of MNCD(Member not Collecting/Distributing) occurs. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex.
           hwLacpPartialLinkLoss 1.3.6.1.4.1.2011.5.25.41.3.4
Part loss of link bandwidth: it means that some members in the LAG group aren't in the working-state, making the number of ports in working-state smaller than the hwTrunkIfMinLinkNum. The trap of PLL(Partial Link Loss) will be restrained by the trap of TLL(Total Link Loss). 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex.
           hwIfFlowDown 1.3.6.1.4.1.2011.5.25.41.3.5
This notification indicates the time when the interface's flow status changes to flow down,and the reason.
           hwIfFlowUp 1.3.6.1.4.1.2011.5.25.41.3.6
This notification indicates the time when the interface's flow status changes to flow up,and the reason.
           hwIfNameChange 1.3.6.1.4.1.2011.5.25.41.3.7
When a single-chassis device is upgraded to a multi-chassis device, the interface information is changed and then the system sends a trap.
           hwIfNameChangeResume 1.3.6.1.4.1.2011.5.25.41.3.8
When a multi-chassis restore a single-chassis device, the interface information is changed and then the system sends a trap.
           hwExtLinkDown 1.3.6.1.4.1.2011.5.25.41.3.9
This notification indicates the time when the member interface link status changes to down.The ifDescr indicates the name of the member interface,the hwIFExtMemberOf indicates the name of main interface.
           hwExtLinkUp 1.3.6.1.4.1.2011.5.25.41.3.10
This notification indicates the time when the member interface link status changes to up.The ifDescr indicates the name of the member interface,the hwIFExtMemberOf indicates the name of main interface.
           hwLoopbackBlock 1.3.6.1.4.1.2011.5.25.41.3.11
This notification indicates block state of the interface.
           hwLoopbackResume 1.3.6.1.4.1.2011.5.25.41.3.12
This notification indicates normal state of the interface.
           hwLacpNegotiateResume 1.3.6.1.4.1.2011.5.25.41.3.13
Negotiation failure alarm is resumed. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is the name of the trunk in the ifXTable of IF-MIB. 3.ifName: It is the name of the port in the ifXTable of IF-MIB. Indexes: 1.hwTrunkIndex; 2.ifIndex.
           hwLacpTotalLinkLossResume 1.3.6.1.4.1.2011.5.25.41.3.14
Link bandwidth lost totally is resumed. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex.
           hwLacpPartialLinkLossResume 1.3.6.1.4.1.2011.5.25.41.3.15
Link bandwidth lost partly is resumed. 1.hwTrunkIfID: The identification of the Trunk interface; 2.ifName: It is in the ifXTable of IF-MIB. Index: hwTrunkIndex.
           hwTrunkSubIfStateToMaster 1.3.6.1.4.1.2011.5.25.41.3.24
This notification indicates BackupState of the Trunk subinterface. 1.hwIfName: The identification of the Trunk subinterface; 2.hwBackupStatus: Current working state of Trunk subinterface.
           hwTrunkSubIfStateToSlave 1.3.6.1.4.1.2011.5.25.41.3.25
This notification indicates BackupState of the Trunk subinterface. 1.hwIfName: The identification of the Trunk subinterface; 2.hwBackupStatus: Current working state of Trunk subinterface.
           hwEntityExtCfmOverSlot 1.3.6.1.4.1.2011.5.25.41.3.26
The hwEntityExtCfmOverSlot notification will be displayed when the configuration of an interface board is restored. The object hwCfmOverPhysicalName idicates the name of the interface board.
           hwEntityExtCfmOverCard 1.3.6.1.4.1.2011.5.25.41.3.27
The hwEntityExtCfmOverCard notification will be displayed when the configuration of an interface card is restored. The object hwCfmOverPhysicalName idicates the name of the interface card.
           hwExtAllMemberDownNotify 1.3.6.1.4.1.2011.5.25.41.3.28
This notification indicates the time when the last member interface link status changes to down. The ifName indicates the name of the Trunk interface.
           hwExtAllMemberDownResume 1.3.6.1.4.1.2011.5.25.41.3.29
This notification indicates the time when the first member interface link status changes to up. The ifName indicates the name of the Trunk interface.
           hwIfControlFlapSuppress 1.3.6.1.4.1.2011.5.25.41.3.31
This notification indicates the time when the interface's status changes from unsuppress to suppress.
           hwIfControlFlapResume 1.3.6.1.4.1.2011.5.25.41.3.32
This notification indicates the time when the interface's status changes from suppress to unsuppress.
           hwExtInterfaceDelete 1.3.6.1.4.1.2011.5.25.41.3.33
This notification indicates the time when the interface was deleted.
       hwMonitorNotifications 1.3.6.1.4.1.2011.5.25.41.4
           hwIfMonitorCrcErrorRising 1.3.6.1.4.1.2011.5.25.41.4.1
Crc error alarm notification
           hwIfMonitorCrcErrorResume 1.3.6.1.4.1.2011.5.25.41.4.2
Crc error alarm resume
           hwIfMonitorSdhErrorRising 1.3.6.1.4.1.2011.5.25.41.4.3
Sdh error alarm notification only for B3
           hwIfMonitorSdhErrorResume 1.3.6.1.4.1.2011.5.25.41.4.4
Sdh error alarm resume only for B3
           hwIfMonitorInputRateRising 1.3.6.1.4.1.2011.5.25.41.4.5
Input rate alarm notification
           hwIfMonitorInputRateResume 1.3.6.1.4.1.2011.5.25.41.4.6
Input rate alarm resume
           hwIfMonitorOutputRateRising 1.3.6.1.4.1.2011.5.25.41.4.7
Output rate alarm notification
           hwIfMonitorOutputRateResume 1.3.6.1.4.1.2011.5.25.41.4.8
Output rate alarm resume
           hwIfMonitorHalfDuplexRising 1.3.6.1.4.1.2011.5.25.41.4.9
Interface half duplex alarm norification
           hwIfMonitorPauseFrameRising 1.3.6.1.4.1.2011.5.25.41.4.10
Pause frame alarm notification
           hwIfMonitorPauseFrameRisingResume 1.3.6.1.4.1.2011.5.25.41.4.11
Pause frame alarm resume
           hwIfPortControlUp 1.3.6.1.4.1.2011.5.25.41.4.12
Control Up alarm notification
           hwIfPortControlDown 1.3.6.1.4.1.2011.5.25.41.4.13
Control Down alarm notification
           hwIfMonitorSdhB1ErrorRising 1.3.6.1.4.1.2011.5.25.41.4.14
Sdh B1 error alarm notification
           hwIfMonitorSdhB1ErrorResume 1.3.6.1.4.1.2011.5.25.41.4.15
Sdh B1 error alarm resume
           hwIfMonitorSdhB2ErrorRising 1.3.6.1.4.1.2011.5.25.41.4.16
Sdh B2 error alarm notification
           hwIfMonitorSdhB2ErrorResume 1.3.6.1.4.1.2011.5.25.41.4.17
Sdh B2 error alarm resume
           hwIfMonitorSymbolErrorRising 1.3.6.1.4.1.2011.5.25.41.4.18
Symbol error alarm notification
           hwIfMonitorSymbolErrorResume 1.3.6.1.4.1.2011.5.25.41.4.19
Crc error alarm resume
           hwIfMonitorBadBytesErrorRising 1.3.6.1.4.1.2011.5.25.41.4.40
Description.
           hwIfMonitorBadBytesErrorResume 1.3.6.1.4.1.2011.5.25.41.4.41
Description.
       hwIFExtTrapConformance 1.3.6.1.4.1.2011.5.25.41.5
           hwIFExtTrapGroups 1.3.6.1.4.1.2011.5.25.41.5.1
               hwIFExtTrapGroup 1.3.6.1.4.1.2011.5.25.41.5.1.1
IF Trap Group.
               hwMonitorTrapGroup 1.3.6.1.4.1.2011.5.25.41.5.1.2
Monitor Trap Group.
       hwIFIpNotifications 1.3.6.1.4.1.2011.5.25.41.6
           hwIfIpAddressChange 1.3.6.1.4.1.2011.5.25.41.6.1
IP Trap Group. The trap will be generated when the primary IP address of an interface changes.