HUAWEI-DATASYNC-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-DATASYNC-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, HUAWEI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwDataSync 1.3.6.1.4.1.2011.5.25.191
Modified hwCfgChgTerminalID.
         hwDataSyncScalarObjects 1.3.6.1.4.1.2011.5.25.191.1
             hwCurrentCfgChgSeqID 1.3.6.1.4.1.2011.5.25.191.1.1 integer32 read-only
The value of this object identifies the ID of the current configuration change. The value ranges from 0 to 65535. After the ID of the configuration change reaches the maximum value, the value of the ID starts from 1 again. After the device is restarted, the value of the ID becomes 0.
             hwCfgChgSeqIDReveralCount 1.3.6.1.4.1.2011.5.25.191.1.2 integer32 read-only
The value of this object identifies the cycle count of the index of configuration change table.
             hwCfgChgTableMaxItem 1.3.6.1.4.1.2011.5.25.191.1.3 integer32 read-only
The value of this object identifies the maximum number of entries in hwCfgChgTable.
             hwCfgBaselineTime 1.3.6.1.4.1.2011.5.25.191.1.4 displaystring read-only
Specifies the time of system confiuration was baseline.
         hwDataSyncTableObjects 1.3.6.1.4.1.2011.5.25.191.2
             hwCfgChgTable 1.3.6.1.4.1.2011.5.25.191.2.1 no-access
This table is used to record configuration changes. In this table, you can find the configuration change based on the specific index.
                 hwCfgChgEntry 1.3.6.1.4.1.2011.5.25.191.2.1.1 no-access
Entry of hwCfgChgTable.
                     hwCfgChgSeqID 1.3.6.1.4.1.2011.5.25.191.2.1.1.1 integer32 read-only
The value of this object identifies the configuration change ID. When configuration is changed, the sequence id will plus 1.
                     hwCfgChgTime 1.3.6.1.4.1.2011.5.25.191.2.1.1.2 dateandtime read-only
This object indicates the configuration change time.
                     hwCfgChgTerminalType 1.3.6.1.4.1.2011.5.25.191.2.1.1.3 integer read-only
This object indicates the type of the terminal. Enumeration: 'netconf': 3, 'snmp': 1, 'telnet': 2.
                     hwCfgChgTerminalID 1.3.6.1.4.1.2011.5.25.191.2.1.1.4 integer32 read-only
The value of this object identifies the terminal ID.
                     hwCfgChgType 1.3.6.1.4.1.2011.5.25.191.2.1.1.5 integer read-only
This object indicates the configuration change type. Enumeration: 'create': 1, 'modify': 2, 'delete': 3.
                     hwCfgChgViewName 1.3.6.1.4.1.2011.5.25.191.2.1.1.6 octet string read-only
This object indicates the name of the view in which the configuration change occurs. For the command operation, the object is the name of the view in which the command is run. For the SNMP operation, the object is the OID of the MIB table or the scalar object.
                     hwCfgChgCmdID 1.3.6.1.4.1.2011.5.25.191.2.1.1.7 integer32 read-only
The value of this object identifies the ID of the configuration change command. For the SNMP operation, the value is 0.
                     hwCfgChgDetailInfo 1.3.6.1.4.1.2011.5.25.191.2.1.1.8 octet string read-only
This object indicates detailed configuration change information. For the command operation, the object is the command line. For the SNMP operation, the object is the index of the MIB table. When there are multiple indexes, the format of index1.index2.index3 is adopted.
             hwCollectTable 1.3.6.1.4.1.2011.5.25.191.2.2 no-access
This table is used to enable the NMS to send the collecting script to the device to trigger the collection, and then monitor the collection status.
                 hwCollectEntry 1.3.6.1.4.1.2011.5.25.191.2.2.1 no-access
Entry of hwCollectTable.
                     hwCollectIndex 1.3.6.1.4.1.2011.5.25.191.2.2.1.1 integer32 no-access
The value of this object identifies the collection index.
                     hwCollectNetManageId 1.3.6.1.4.1.2011.5.25.191.2.2.1.2 integer32 read-write
The value of this object identifies the NMS ID.
                     hwCollectOperation 1.3.6.1.4.1.2011.5.25.191.2.2.1.3 integer read-write
This object indicates the instruction for the collection operation. Default value is stop. Enumeration: 'begin': 1, 'stop': 2.
                     hwCollectInScriptFile 1.3.6.1.4.1.2011.5.25.191.2.2.1.4 octet string read-write
This object indicates the name of the script file. T he length of the file name ranges from 1 character to 255 characters.
                     hwCollectInResultFile 1.3.6.1.4.1.2011.5.25.191.2.2.1.5 octet string read-write
This object indicates the name of the result file. The length of the file name ranges from 1 character to 255 characters.
                     hwCollectState 1.3.6.1.4.1.2011.5.25.191.2.2.1.6 integer read-only
This object indicates the collection status. Enumeration: 'collecting': 2, 'idle': 1.
                     hwCollectRowStatus 1.3.6.1.4.1.2011.5.25.191.2.2.1.7 rowstatus read-only
This object indicates the row status.
         hwDataSyncNotifications 1.3.6.1.4.1.2011.5.25.191.3
             hwCfgChgNotify 1.3.6.1.4.1.2011.5.25.191.3.1
This trap is generated when a configuration change occurs on the device within a specified period.
             hwCfgLastSaveFailNotify 1.3.6.1.4.1.2011.5.25.191.3.2
The last save operation failed, please check the configuration.
         hwDataSyncConformance 1.3.6.1.4.1.2011.5.25.191.4
             hwDataSyncGroups 1.3.6.1.4.1.2011.5.25.191.4.1
                 hwDataSyncScalarObjectsGroup 1.3.6.1.4.1.2011.5.25.191.4.1.1
A collection of objects on DataSync ScalarObjects Information.
                 hwCfgChgNotifyGroup 1.3.6.1.4.1.2011.5.25.191.4.1.2
A collection of objects on Configuration Change Information.
                 hwDataSyncNotifyGroup 1.3.6.1.4.1.2011.5.25.191.4.1.3
A collection of objects on synchronization Configuration Notify Information.
             hwDataSyncCompliances 1.3.6.1.4.1.2011.5.25.191.4.2
                 hwDataSyncCompliance 1.3.6.1.4.1.2011.5.25.191.4.2.1
The compliance statement for entities that support the huawei DataSync MIB.