HUAWEI-ATM-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-ATM-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, HUAWEI-MIB, ATM-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwAtmMIB 1.3.6.1.4.1.2011.5.25.156
This MIB is mainly used to configure the ATM OC-3/STM-1 and ATM OC-12/STM-4 interface, IPoA, IPoEoA, PVC service type, OAM F5 loopback, parameters of the VP limit, and mapping between the peer VPI and the local VPI.
         hwAtmObjects 1.3.6.1.4.1.2011.5.25.156.1
             hwAtmTable 1.3.6.1.4.1.2011.5.25.156.1.1 no-access
This table is used to configure the parameters of the ATM interface.
                 hwAtmEntry 1.3.6.1.4.1.2011.5.25.156.1.1.1 no-access
This table is used to configure the parameters of the ATM interface.
                     hwAtmIfIndex 1.3.6.1.4.1.2011.5.25.156.1.1.1.1 interfaceindex no-access
Indicates the interface index.
                     hwAtmIfType 1.3.6.1.4.1.2011.5.25.156.1.1.1.11 integer read-only
Indicates the interface type. Enumeration: 'oc3OrStm1': 1, 'oc12OrStm4': 2.
                     hwAtmClock 1.3.6.1.4.1.2011.5.25.156.1.1.1.12 integer read-write
Master clock: uses the internal clock signal. Slave clock: uses the line clock signal. Enumeration: 'slave': 2, 'master': 1.
                     hwAtmFrameFormat 1.3.6.1.4.1.2011.5.25.156.1.1.1.13 integer read-write
For the optical interface STM-1/STM-4, the frame format on the ATM interface is SDH; for the OC-3/OC-12 interface, the frame format is SONET. The default frame format is SDH. Enumeration: 'sonet': 2, 'sdh': 1.
                     hwAtmScramble 1.3.6.1.4.1.2011.5.25.156.1.1.1.14 truthvalue read-write
By default, the scramble function is enabled. The scramble function takes effect only on payload rather than cell header. true: enables the scramble function. false: disables the scramble function.
                     hwAtmLoopback 1.3.6.1.4.1.2011.5.25.156.1.1.1.15 integer read-write
Enable the loopback function of the channel. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. By default, all loopback functions are disabled. Enumeration: 'remote': 2, 'none': 255, 'local': 1, 'payload': 3.
             hwAtmMapPvpTable 1.3.6.1.4.1.2011.5.25.156.1.2 no-access
This table is used to configure the mapping between the peer VPI and the local VPI.
                 hwAtmMapPvpEntry 1.3.6.1.4.1.2011.5.25.156.1.2.1 no-access
This table is used to configure the mapping between the peer VPI and the local VPI.
                     hwAtmMapPvpIfIndex 1.3.6.1.4.1.2011.5.25.156.1.2.1.1 interfaceindex no-access
Indicates the interface index.
                     hwAtmMapPvpVplVpi 1.3.6.1.4.1.2011.5.25.156.1.2.1.2 atmvpidentifier no-access
Indicates the local VPI value. The value is an integer ranging from 0 to 255.
                     hwAtmMapPvpRemoteVplVpi 1.3.6.1.4.1.2011.5.25.156.1.2.1.11 atmvpidentifier read-only
Indicates the peer VPI value. The value is an integer ranging from 0 to 255.
                     hwAtmMapPvpRowStatus 1.3.6.1.4.1.2011.5.25.156.1.2.1.51 rowstatus read-only
This variable is used to create or delete an object.
             hwAtmMapPvcTable 1.3.6.1.4.1.2011.5.25.156.1.3 no-access
This table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI.
                 hwAtmMapPvcEntry 1.3.6.1.4.1.2011.5.25.156.1.3.1 no-access
This table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI.
                     hwAtmMapPvcRemoteVclVci 1.3.6.1.4.1.2011.5.25.156.1.3.1.11 atmvcidentifier read-only
Indicates the peer VCI value. VCI is short for Virtual Channel Identifier. The VCI value ranges from 0 to 2047. Generally, the values from 0 to 31 are reserved for specail use.
                     hwAtmMapPvcRemoteVclVpi 1.3.6.1.4.1.2011.5.25.156.1.3.1.12 atmvpidentifier read-only
Indicates the peer VPI value. The value is an integer ranging from 0 to 255.
                     hwAtmMapPvcRowStatus 1.3.6.1.4.1.2011.5.25.156.1.3.1.51 rowstatus read-only
This variable is used to create or delete an object.
             hwAtmServiceTable 1.3.6.1.4.1.2011.5.25.156.1.4 no-access
This table is used to configure the service type and related parameters for the PVC.
                 hwAtmServiceEntry 1.3.6.1.4.1.2011.5.25.156.1.4.1 no-access
This table is used to configure the service type for the PVC.
                     hwAtmServiceName 1.3.6.1.4.1.2011.5.25.156.1.4.1.1 octet string no-access
Indicates the name of the service type. The name is a string of 1 to 31 characters.
                     hwAtmServiceType 1.3.6.1.4.1.2011.5.25.156.1.4.1.11 integer read-only
Set the service type for the PVC as required. Enumeration: 'cbr': 1, 'ubrPlus': 5, 'vbrNrt': 2, 'vbrRt': 3, 'ubr': 4.
                     hwAtmServiceOutputPcr 1.3.6.1.4.1.2011.5.25.156.1.4.1.12 integer32 read-only
Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is ubr, the peak output rate is 0.
                     hwAtmServiceOutputScr 1.3.6.1.4.1.2011.5.25.156.1.4.1.13 integer32 read-only
Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0.
                     hwAtmServiceOutputMbs 1.3.6.1.4.1.2011.5.25.156.1.4.1.14 integer32 read-only
Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0.
                     hwAtmServiceCbrCdvtValue 1.3.6.1.4.1.2011.5.25.156.1.4.1.15 integer32 read-only
Indicates the limit of the ATM cell delay variation. When hwPvcServiceTableType is cbr, the variable is valid. For other service types, the variable is 0.
                     hwAtmServiceOutputMcr 1.3.6.1.4.1.2011.5.25.156.1.4.1.16 integer32 read-only
Indicates the mini width guarantee bit rate of the ATM cell. When hwPvcServiceTableType is ubr, the peak output rate is 0.
                     hwAtmServiceRowStatus 1.3.6.1.4.1.2011.5.25.156.1.4.1.51 rowstatus read-only
This variable is used to create or delete an object.
             hwAtmPvcServiceTable 1.3.6.1.4.1.2011.5.25.156.1.5 no-access
This table is used to configure the service type for the PVC.
                 hwAtmPvcServiceEntry 1.3.6.1.4.1.2011.5.25.156.1.5.1 no-access
This table is used to configure the service type for the PVC.
                     hwAtmPvcServiceName 1.3.6.1.4.1.2011.5.25.156.1.5.1.11 octet string read-only
Indicates the name of the service type. The name is a string of 1 to 31 characters.
                     hwAtmPvcTransmittalDirection 1.3.6.1.4.1.2011.5.25.156.1.5.1.21 integer read-only
Indicates the input or output tpye of the service type. Enumeration: 'input': 1, 'output': 2.
                     hwAtmPvcServiceRowStatus 1.3.6.1.4.1.2011.5.25.156.1.5.1.51 rowstatus read-only
This variable is used to create or delete an object.
             hwAtmIfConfTable 1.3.6.1.4.1.2011.5.25.156.1.11 no-access
Indicates the configuration of the ATM interface.
                   hwAtmIfConfEntry 1.3.6.1.4.1.2011.5.25.156.1.11.1 no-access
Indicates the configuration of the ATM interface.
                       hwAtmIfConfIfIndex 1.3.6.1.4.1.2011.5.25.156.1.11.1.1 interfaceindex no-access
Indicates the interface index.
                       hwAtmIfConfMaxVccs 1.3.6.1.4.1.2011.5.25.156.1.11.1.11 integer32 read-write
Indicates the maximum number of the PVCs.
                       hwAtmIfConfOperVccs 1.3.6.1.4.1.2011.5.25.156.1.11.1.12 integer32 read-only
Indicates the number of the configured PVCs.
                       hwAtmIfConfIntfType 1.3.6.1.4.1.2011.5.25.156.1.11.1.13 integer read-write
This object indicates the type of the serial interface with the ATM protocol. Enumeration: 'uni': 1, 'nni': 2.
             hwAtmVplTable 1.3.6.1.4.1.2011.5.25.156.1.12 no-access
Indicates the configuration of the ATM PVP.
                   hwAtmVplEntry 1.3.6.1.4.1.2011.5.25.156.1.12.1 no-access
Indicates the configuration of the ATM PVP.
                       hwAtmVplIfIndex 1.3.6.1.4.1.2011.5.25.156.1.12.1.1 interfaceindex no-access
Indicates the interface index.
                       hwAtmVplVpi 1.3.6.1.4.1.2011.5.25.156.1.12.1.2 atmvpidentifier no-access
VPI.
                       hwAtmVplRowStatus 1.3.6.1.4.1.2011.5.25.156.1.12.1.51 rowstatus read-only
Indicates the status of the row.
             hwAtmVclTable 1.3.6.1.4.1.2011.5.25.156.1.13 no-access
Indicates the configuration of the ATM PVC.
                   hwAtmVclEntry 1.3.6.1.4.1.2011.5.25.156.1.13.1 no-access
Indicates the configuration of the ATM PVC.
                       hwAtmVclIfIndex 1.3.6.1.4.1.2011.5.25.156.1.13.1.1 interfaceindex no-access
Indicates the interface index.
                       hwAtmVclVpi 1.3.6.1.4.1.2011.5.25.156.1.13.1.2 atmvpidentifier no-access
VPI.
                       hwAtmVclVci 1.3.6.1.4.1.2011.5.25.156.1.13.1.3 atmvcidentifier no-access
VCI.
                       hwAtmVclName 1.3.6.1.4.1.2011.5.25.156.1.13.1.11 octet string read-only
Indicates the name of the PVC.
                       hwAtmVccAal5EncapsType 1.3.6.1.4.1.2011.5.25.156.1.13.1.12 integer read-only
Indicates the encapsulation mode of AAL5. Enumeration: 'aal5Snap': 1, 'aal5Mux': 2, 'aal5MuxNonstandard': 3, 'aal5Nlpid': 4.
                       hwAtmVclRowStatus 1.3.6.1.4.1.2011.5.25.156.1.13.1.51 rowstatus read-only
Indicates the status of the row.
             hwAtmPvcIpoaTable 1.3.6.1.4.1.2011.5.25.156.1.14 no-access
This table is used to configure the IPoA mapping on the PVC.
                   hwAtmPvcIpoaEntry 1.3.6.1.4.1.2011.5.25.156.1.14.1 no-access
This table is used to configure the IPoA mapping on the PVC.
                       hwAtmPvcIpoaType 1.3.6.1.4.1.2011.5.25.156.1.14.1.3 integer no-access
Indicates the type of the PVC IPoA mapping. ip: sets the peer IP address and mask that are mapped to the PVC. default: configures a mapping with default route attributes. If no mapping of the next hop address of a packet can be found, the packet is sent over the PVC if the PVC is configured with default mapping. inarp: configures InARP on the PVC. Enumeration: 'default': 2, 'ip': 1, 'inarp': 3.
                       hwAtmPvcIpoaIpAddress 1.3.6.1.4.1.2011.5.25.156.1.14.1.4 ipaddress no-access
Indicates the peer IP address mapped to the PVC.
                       hwAtmPvcIpoaIpMask 1.3.6.1.4.1.2011.5.25.156.1.14.1.11 ipaddress read-only
Indicates the IP address mask. The IP address mask is an optional parameter.
                       hwAtmPvcIpoaInarpInterval 1.3.6.1.4.1.2011.5.25.156.1.14.1.12 integer32 read-only
Indicates the interval for sending InARP packets. The parameter is optional. The value ranges from 1 to 600 in seconds. If the type of the PVC IPoA mapping is IP or default, the value is 0. The default value is 1.
                       hwAtmPvcIpoaBroadcast 1.3.6.1.4.1.2011.5.25.156.1.14.1.13 truthvalue read-only
If a mapping with this attribute is configured on the PVC, broadcast packets on the interface where the PVC resides will be sent over the PVC.
                       hwAtmPvcIpoaRowStatus 1.3.6.1.4.1.2011.5.25.156.1.14.1.51 rowstatus read-only
RowStatus.
             hwAtmPvcBridgeTable 1.3.6.1.4.1.2011.5.25.156.1.15 no-access
This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC.
                   hwAtmPvcBridgeEntry 1.3.6.1.4.1.2011.5.25.156.1.15.1 no-access
This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC.
                       hwAtmPvcBridgeDstIfIndex 1.3.6.1.4.1.2011.5.25.156.1.15.1.11 interfaceindex read-only
Indicates the index of the VE interface.
                       hwAtmPvcBridgeRowStatus 1.3.6.1.4.1.2011.5.25.156.1.15.1.51 rowstatus read-only
RowStatus.
             hwAtmPvcOamLoopbackTable 1.3.6.1.4.1.2011.5.25.156.1.17 no-access
This table is used to configure OAM F5 Loopback, enable the sending of OAM F5 Loopback cells, and configure the parameters of the retransmission check or modify the parameters of the retransmission check.
                   hwAtmPvcOAMLoopbackEntry 1.3.6.1.4.1.2011.5.25.156.1.17.1 no-access
This table is used to configure OAM F5 Loopback.
                       hwAtmPvcOAMLoopbackFrequency 1.3.6.1.4.1.2011.5.25.156.1.17.1.11 integer32 read-only
Indicates the interval for sending OAM F5 Loopback cells.
                       hwAtmPvcOAMLoopbackUpCount 1.3.6.1.4.1.2011.5.25.156.1.17.1.12 integer32 read-only
Indicates the number of continuous OAM F5 Loopback cells that must be received before the PVC turns Up.
                       hwAtmPvcOAMLoopbackDownCount 1.3.6.1.4.1.2011.5.25.156.1.17.1.13 integer32 read-only
Indicates the number of continuous OAM F5 Loopback cells that are not received before the PVC turns Down.
                       hwAtmPvcOAMLoopbackRetryFrequency 1.3.6.1.4.1.2011.5.25.156.1.17.1.14 integer32 read-only
Indicates the interval for sending cells during OAM F5 Loopback retransmission verification before the PVC status changes.
                       hwAtmPvcOAMLoopbackRowStatus 1.3.6.1.4.1.2011.5.25.156.1.17.1.51 rowstatus read-only
RowStatus
             hwAtmPvpLimitTable 1.3.6.1.4.1.2011.5.25.156.1.18 no-access
This table is used to configure the VP limit. To monitor the VP, configure related VP parameters.
                   hwAtmPvpLimitEntry 1.3.6.1.4.1.2011.5.25.156.1.18.1 no-access
This table is used to configure the VP limit.
                       hwAtmPvpLimitIfIndex 1.3.6.1.4.1.2011.5.25.156.1.18.1.1 interfaceindex no-access
Indicates the interface index.
                       hwAtmPvpLimitVpi 1.3.6.1.4.1.2011.5.25.156.1.18.1.2 atmvpidentifier no-access
VPI.
                       hwAtmPvpLimitPeakRate 1.3.6.1.4.1.2011.5.25.156.1.18.1.11 integer32 read-only
VCI.
                       hwAtmPvpLimitRowStatus 1.3.6.1.4.1.2011.5.25.156.1.18.1.51 rowstatus read-only
RowStatus.
         hwAtmConformance 1.3.6.1.4.1.2011.5.25.156.11
               hwAtmCompliances 1.3.6.1.4.1.2011.5.25.156.11.1
                   hwAtmCompliance 1.3.6.1.4.1.2011.5.25.156.11.1.1
The compliance statement for systems supporting the HUAWEI-ATM-MIB.
               hwAtmGroups 1.3.6.1.4.1.2011.5.25.156.11.2
                   hwAtmObjectGroup 1.3.6.1.4.1.2011.5.25.156.11.2.1
The Atm attribute group.
                   hwAtmIfConf 1.3.6.1.4.1.2011.5.25.156.11.2.2
Description.
                   hwAtmVplObjectGroup 1.3.6.1.4.1.2011.5.25.156.11.2.3
The Atm Pvc Bridge attribute group.
                   hwAtmVclObjectGroup 1.3.6.1.4.1.2011.5.25.156.11.2.4
Description.
                   hwAtmMapPvpObjectGroup 1.3.6.1.4.1.2011.5.25.156.11.2.5
The Atm Map Pvp attribute group.
                   hwAtmMapPvcObjectGroup 1.3.6.1.4.1.2011.5.25.156.11.2.6
The Atm Map Pvc attribute group.
                   hwAtmServiceObjectGroup 1.3.6.1.4.1.2011.5.25.156.11.2.7
The Atm Service attribute group.
                   hwAtmPvcServiceObjectGroup 1.3.6.1.4.1.2011.5.25.156.11.2.8
The Atm Pvc Service attribute group.
                   hwAtmPvcIpoaObjectGroup 1.3.6.1.4.1.2011.5.25.156.11.2.9
The Atm Pvc IPOA attribute group.
                   hwAtmPvcBridgeObjectGroup 1.3.6.1.4.1.2011.5.25.156.11.2.10
The Atm Pvl attribute group.
                   hwAtmPvcOAMLoopbackObjectGroup 1.3.6.1.4.1.2011.5.25.156.11.2.11
The Port attribute group.
                   hwAtmPvpLimitObjectGroup 1.3.6.1.4.1.2011.5.25.156.11.2.12
The Port attribute group.