HPN-ICF-TRANSCEIVER-INFO-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPN-ICF-TRANSCEIVER-INFO-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpnicfTransceiver 1.3.6.1.4.1.11.2.14.11.15.2.70
The objects in this MIB module are used to display the information of transceiver on interface.
       hpnicfTransceiverInfoAdm 1.3.6.1.4.1.11.2.14.11.15.2.70.1
           hpnicfTransceiverInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1 no-access
This table show the information of transceiver on interface.
               hpnicfTransceiverInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1 no-access
The entry of the hpnicfTransceiverInfoTable.
                   hpnicfTransceiverHardwareType 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.1 octet string read-only
Hardware type of the interface, such as SM(single mode).
                   hpnicfTransceiverType 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.2 octet string read-only
Type of the interface, such as SFP/XFP/GBIC.
                   hpnicfTransceiverWaveLength 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.3 integer32 read-only
Wave length of the interface, measured in nanometer.
                   hpnicfTransceiverVendorName 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.4 octet string read-only
Vendor name of the interface.
                   hpnicfTransceiverSerialNumber 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.5 octet string read-only
Serial number of the interface.
                   hpnicfTransceiverFiberDiameterType 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.6 integer read-only
The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber copper - copper cable. Enumeration: 'unknown': 65535, 'copper': 4, 'fiber50': 2, 'fiber9': 1, 'fiber625': 3.
                   hpnicfTransceiverTransferDistance 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.7 integer32 read-only
The maximal distance which the interface could transmit, measured in meter.
                   hpnicfTransceiverDiagnostic 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.8 truthvalue read-only
Indicating the digital diagnostic monitoring function .
                   hpnicfTransceiverCurTXPower 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.9 integer32 read-only
Indicating the current transmitted power . The unit is in hundredths of dBM.
                   hpnicfTransceiverMaxTXPower 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.10 integer32 read-only
Indicating the maximal transmitted power . The unit is in hundredths of dBM.
                   hpnicfTransceiverMinTXPower 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.11 integer32 read-only
Indicating the minimal transmitted power . The unit is in hundredths of dBM.
                   hpnicfTransceiverCurRXPower 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.12 integer32 read-only
Indicating the current received power . The unit is in hundredths of dBM.
                   hpnicfTransceiverMaxRXPower 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.13 integer32 read-only
Indicating the maximal received power . The unit is in hundredths of dBM.
                   hpnicfTransceiverMinRXPower 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.14 integer32 read-only
Indicating the minimal received power . The unit is in hundredths of dBM.
                   hpnicfTransceiverTemperature 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.15 integer32 read-only
Indicating the current temperature. The unit is Celsius centigrade.
                   hpnicfTransceiverVoltage 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.16 integer32 read-only
Indicating the current voltage . The unit is in hundredths of V
                   hpnicfTransceiverBiasCurrent 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.17 integer32 read-only
Indicating the current bias electric current . The unit is in hundredths of mA
                   hpnicfTransceiverTempHiAlarm 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.18 integer32 read-only
Transceiver temperature high alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
                   hpnicfTransceiverTempLoAlarm 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.19 integer32 read-only
Transceiver temperature low alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
                   hpnicfTransceiverTempHiWarn 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.20 integer32 read-only
Transceiver temperature high warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
                   hpnicfTransceiverTempLoWarn 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.21 integer32 read-only
Transceiver temperature low warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
                   hpnicfTransceiverVccHiAlarm 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.22 integer32 read-only
Transceiver VCC high alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
                   hpnicfTransceiverVccLoAlarm 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.23 integer32 read-only
Transceiver VCC low alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
                   hpnicfTransceiverVccHiWarn 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.24 integer32 read-only
Transceiver VCC high warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
                   hpnicfTransceiverVccLoWarn 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.25 integer32 read-only
Transceiver VCC low warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
                   hpnicfTransceiverBiasHiAlarm 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.26 integer32 read-only
Transceiver bias high alarm threshold limit in microamps.
                   hpnicfTransceiverBiasLoAlarm 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.27 integer32 read-only
Transceiver bias low alarm threshold limit in microamps.
                   hpnicfTransceiverBiasHiWarn 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.28 integer32 read-only
Transceiver bias high warning threshold limit in microamps.
                   hpnicfTransceiverBiasLoWarn 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.29 integer32 read-only
Transceiver bias low warning threshold limit in microamps.
                   hpnicfTransceiverPwrOutHiAlarm 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.30 integer32 read-only
Transceiver transmit power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
                   hpnicfTransceiverPwrOutLoAlarm 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.31 integer32 read-only
Transceiver transmit power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
                   hpnicfTransceiverPwrOutHiWarn 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.32 integer32 read-only
Transceiver transmit power high warning threshold limit in tenths of microwatts As an example: 10000 is 1 milliwatt.
                   hpnicfTransceiverPwrOutLoWarn 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.33 integer32 read-only
Transceiver transmit power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
                   hpnicfTransceiverRcvPwrHiAlarm 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.34 integer32 read-only
Transceiver receive power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
                   hpnicfTransceiverRcvPwrLoAlarm 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.35 integer32 read-only
Transceiver receive power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
                   hpnicfTransceiverRcvPwrHiWarn 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.36 integer32 read-only
Transceiver receive power high warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
                   hpnicfTransceiverRcvPwrLoWarn 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.37 integer32 read-only
Transceiver receive power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
                   hpnicfTransceiverErrors 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.38 bits read-only
Bitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration mismatch(2) Transceiver type not supported by port hardware(3) WIS local fault(4) Receive optical power fault(5) PMA/PMD receiver local fault(6) PCS receive local fault(7) PHY XS receive local fault(8) Laser bias current fault(9) Laser temperature fault(10) Laser output power fault(11) TX fault(12) PMA/PMD transmitter local fault(13) PCS transmit local fault(14) PHY XS Transmit Local Fault(15) RX loss of signal(16) Unused(17-31) Bits: 'pmapmdReceiverLocalFault': 6, 'phyXSReceiveLocalFault': 8, 'laserOutputPowerFault': 11, 'pcsReceiveLocalFault': 7, 'xcvrTypeAndPortConfigMismatch': 2, 'wisLocalFault': 4, 'laserBiasCurrentFault': 9, 'xcvrTypeNotSupported': 3, 'rxLossOfSignal': 16, 'phyXSTransmitLocalFault': 15, 'txFault': 12, 'pmapmdTransmitterLocalFault': 13, 'pcsTransmitLocalFault': 14, 'laserTemperatureFault': 10, 'xcvrChecksum': 1, 'xcvrIOError': 0, 'rcvOpticalPowerFault': 5.
           hpnicfTransceiverChannelTable 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2 no-access
This table provides statistics about transceiver with multi-channel.
               hpnicfTransceiverChannelEntry 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1 no-access
The entry of the hpnicfTransceiverChannelTable.
                   hpnicfTransceiverChannelIndex 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.1 integer32 no-access
The channel index of transceiver. Indicating one channel of the interface.
                   hpnicfTransceiverChannelCurTXPower 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.2 integer32 read-only
Indicating the current transmission power. The unit is in hundredths of dBM.
                   hpnicfTransceiverChannelCurRXPower 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.3 integer32 read-only
Indicating the current received power. The unit is in hundredths of dBM.
                   hpnicfTransceiverChannelTemperature 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.4 integer32 read-only
Indicating the current temperature. The unit is Celsius centigrade.
                   hpnicfTransceiverChannelBiasCurrent 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.5 integer32 read-only
Indicating the current bias electric current. The unit is in hundredths of mA.