HPN-ICF-PBR-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPN-ICF-PBR-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC, HPN-ICF-OID-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpnicfPBR 1.3.6.1.4.1.11.2.14.11.15.2.113
This MIB contains objects to manage the configuration and information of PBR. It routes IP packets by user defined policy other than normal destination address based routing.
         hpnicfPBRObjects 1.3.6.1.4.1.11.2.14.11.15.2.113.1
             hpnicfPBRGlobal 1.3.6.1.4.1.11.2.14.11.15.2.113.1.1
                 hpnicfPBRNexthopTrapEnabled 1.3.6.1.4.1.11.2.14.11.15.2.113.1.1.1 truthvalue read-write
The value is a global setting only for IPv4 PBR. If the value is set to 'false', the feature is disabled.
                 hpnicfPBRLocalPolicy 1.3.6.1.4.1.11.2.14.11.15.2.113.1.1.2 displaystring read-write
The value is a global setting. An existing policy name setting enables local PBR for IPv4 packets initiated by the device. Only one policy can be applied locally. An empty name setting disables the feature.
                 hpnicfPBRIPv6NexthopTrapEnabled 1.3.6.1.4.1.11.2.14.11.15.2.113.1.1.3 truthvalue read-write
The value is a global setting only for IPv6 PBR. If the value is set to 'false', the feature is disabled.
             hpnicfPBRMibTrap 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2
                 hpnicfPBRTrapObjects 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.1
                     hpnicfPBRNexthopAddrType 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.1.1 inetaddresstype no-access
Indicating address type of hpnicfPBRNexthopAddr, which can be IPv4 or IPv6.
                     hpnicfPBRNexthopAddr 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.1.2 inetaddress no-access
The involved next hop IP address of trap information.
                 hpnicfPBRTraps 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.2
                     hpnicfPBRTrapsPrefix 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.2.0
                         hpnicfPBRNexthopFailedTrap 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.2.0.1
When the next hop of PBR apply clause became unreachable according to routing information, trap is generated and is sent to the remote monitoring device.
         hpnicfPBRTables 1.3.6.1.4.1.11.2.14.11.15.2.113.2
             hpnicfPBRMibPolicyNodeTable 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1 no-access
A table for PBR nodes.
                 hpnicfPBRMibPolicyNodeEntry 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1 no-access
An entry for PBR nodes.
                     hpnicfPBRMibPolicyNodeAddrType 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.1 inetaddresstype no-access
Address type of policy node, which can be IPv4 or IPv6.
                     hpnicfPBRMibPolicyName 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.2 displaystring no-access
Policy name of PBR node.
                     hpnicfPBRMibPolicyNodeId 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.3 integer32 no-access
Sequence identifier of PBR node.
                     hpnicfPBRMibPolicyNodeMode 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.4 truthvalue read-only
Mode of PBR node. If the mode of a node is marked as true, the packets that meet the matching rules are processed by action rules in the node. If the mode of a node is marked as false, the packets that meet the matching rules are sent back to the normal forwarding path.
                     hpnicfPBRMibPolicyNodeRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.5 rowstatus read-only
Operation status of this table entry. Three actions are used: active, createAndGo, and destroy.
             hpnicfPBRMibIfPolicyTable 1.3.6.1.4.1.11.2.14.11.15.2.113.2.2 no-access
A table for interfaces being applied with PBR nodes with the same policy name.
                 hpnicfPBRMibIfPolicyEntry 1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1 no-access
An entry for reference relation between interface and policy nodes.
                     hpnicfPBRMibPolicyAddressType 1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1.1 inetaddresstype no-access
Address type of policy node, which can be IPv4 or IPv6.
                     hpnicfPBRMibAppliedPolicyName 1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1.2 displaystring read-only
Policy name of PBR nodes.
                     hpnicfPBRMibIfPolicyRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1.3 rowstatus read-only
Operation status of this table entry. Three actions are used: active, createAndGo, and destroy.
             hpnicfPBRMibMatchAclTable 1.3.6.1.4.1.11.2.14.11.15.2.113.2.3 no-access
A table for ACLs being used by a policy node. Only one ACL can be used within a node at most.
                 hpnicfPBRMibMatchAclEntry 1.3.6.1.4.1.11.2.14.11.15.2.113.2.3.1 no-access
An entry for policy node that uses an ACL group as its if-match rule.
                     hpnicfPBRMibAclGroupId 1.3.6.1.4.1.11.2.14.11.15.2.113.2.3.1.1 integer32 read-write
Index of number-acl group. Setting -1 indicates closing this rule.
             hpnicfPBRMibApplyPrecedenceTable 1.3.6.1.4.1.11.2.14.11.15.2.113.2.4 no-access
A table for precedence values being used by a policy node. Only one precedence value can be used within a node at most.
                 hpnicfPBRMibApplyPrecedenceEntry 1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1 no-access
An entry for policy node with an action to set IP precedence for matching packets.
                     hpnicfPBRMibApplyPrecedenceValue 1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1.1 integer32 read-write
Value of precedence being applied on IP header. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7) Setting -1 indicates closing this action.
             hpnicfPBRMibApplyNexthopTable 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5 no-access
A table for next hop actions being used by a policy node.
                 hpnicfPBRMibApplyNexthopEntry 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1 no-access
An entry for policy node with an action to set next hop for matching packets.
                     hpnicfPBRMibApplyNexthopIndex 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.1 integer32 no-access
Index of next hop for the apply next hop action.
                     hpnicfPBRMibApplyNexthopVpnName 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.2 displaystring read-only
Name of VPN instance where apply next hop action is used.
                     hpnicfPBRMibApplyNexthopAddressType 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.3 inetaddresstype read-only
Address type of hpnicfPBRMibApplyNexthopAddress, which can be IPv4 or IPv6.
                     hpnicfPBRMibApplyNexthopAddress 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.4 inetaddress read-only
Next hop IP address of apply next hop action.
                     hpnicfPBRMibApplyNexthopTrackId 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.5 integer32 read-only
Identifier of track object related with next hop. Setting 0 indicates closing this function.
                     hpnicfPBRMibApplyNexthopDirect 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.6 truthvalue read-only
Direct route attribute of next hop according to route information.
                     hpnicfPBRMibApplyNexthopRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.7 rowstatus read-only
Operation status of this table entry. Three actions are used: active, createAndGo, and destroy.
             hpnicfPBRMibApplyDefaultNexthopTable 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6 no-access
A table for default next hop actions being used by a policy node.
                 hpnicfPBRMibApplyDefaultNexthopEntry 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1 no-access
An entry for policy node with an action to set default next hop for matching packets.
                     hpnicfPBRMibApplyDefaultNexthopIndex 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.1 integer32 no-access
Index of default next hop for the apply default next hop action.
                     hpnicfPBRMibApplyDefaultNexthopVpnName 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.2 displaystring read-only
Name of VPN instance where apply default next hop action is used.
                     hpnicfPBRMibApplyDefaultNexthopAddressType 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.3 inetaddresstype read-only
Address type of hpnicfPBRMibApplyDefaultNexthopAddress, which can be IPv4 or IPv6.
                     hpnicfPBRMibApplyDefaultNexthopAddress 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.4 inetaddress read-only
Next hop IP address of apply default next hop action.
                     hpnicfPBRMibApplyDefaultNexthopTrackId 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.5 integer32 read-only
Identifier of track object related with default next hop. Setting 0 indicates closing this function.
                     hpnicfPBRMibApplyDefaultNexthopDirect 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.6 truthvalue read-only
Direct route attribute of apply default next hop address according to route information.
                     hpnicfPBRMibApplyDefaultNexthopRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.7 rowstatus read-only
Operation status of this table entry. Three actions are used: active, createAndGo, and destroy.