HPN-ICF-IF-EXT-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPN-ICF-IF-EXT-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpnicfIfExt 1.3.6.1.4.1.11.2.14.11.15.2.40
This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information.
       hpnicfIfExtScalarGroup 1.3.6.1.4.1.11.2.14.11.15.2.40.1
           hpnicfIfStatGlobalFlowInterval 1.3.6.1.4.1.11.2.14.11.15.2.40.1.1 integer32 read-write
Sampling interval for in/out flow of all interfaces. Setting zero indicates closing the statistic function.
       hpnicfIfExtGroup 1.3.6.1.4.1.11.2.14.11.15.2.40.2
           hpnicfIfStat 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1
               hpnicfIfStatScalarGroup 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.1
               hpnicfIfStatTable 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2
                   hpnicfIfFlowStatTable 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1 no-access
This table contains objects to get statistic information of interfaces on a device.
                       hpnicfIfFlowStatEntry 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1 no-access
Entry items
                           hpnicfIfStatFlowInterval 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.1 integer32 read-write
Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.
                           hpnicfIfStatFlowInBits 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.2 unsigned32 read-only
In bits in the specific interval.
                           hpnicfIfStatFlowOutBits 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.3 unsigned32 read-only
Out bits in specific interval.
                           hpnicfIfStatFlowInPkts 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.4 unsigned32 read-only
In Packets in the specific interval.
                           hpnicfIfStatFlowOutPkts 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.5 unsigned32 read-only
Out packets in the specific interval.
                           hpnicfIfStatFlowInBytes 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.6 unsigned32 read-only
In bytes in the specific interval.
                           hpnicfIfStatFlowOutBytes 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.7 unsigned32 read-only
Out bytes in the specific interval.
                   hpnicfIfSpeedStatTable 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2 no-access
This table contains objects to get average speed information in the specific interval of interfaces on a device.
                       hpnicfIfSpeedStatEntry 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1 no-access
Entry items
                           hpnicfIfSpeedStatInterval 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.1 integer32 read-write
Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.
                           hpnicfIfSpeedStatInPkts 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.2 unsigned32 read-only
Average of input packets per second in the specific interval by hpnicfIfSpeedStatInterval.
                           hpnicfIfSpeedStatOutPkts 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.3 unsigned32 read-only
Average of output packets per second in the specific interval by hpnicfIfSpeedStatInterval.
                           hpnicfIfSpeedStatInBytes 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.4 unsigned32 read-only
Average of input bytes per second in the specific interval by hpnicfIfSpeedStatInterval.
                           hpnicfIfSpeedStatOutBytes 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.5 unsigned32 read-only
Average of output bytes per second in the specific interval by hpnicfIfSpeedStatInterval.
                   hpnicfIfHCFlowStatTable 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3 no-access
This table contains objects to get statistic information of interfaces on a device.
                       hpnicfIfHCFlowStatEntry 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1 no-access
Entry items
                           hpnicfIfStatFlowHCInBits 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.1 counterbasedgauge64 read-only
In bits in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInBits.
                           hpnicfIfStatFlowHCOutBits 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.2 counterbasedgauge64 read-only
Out bits in specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutBits.
                           hpnicfIfStatFlowHCInPkts 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.3 counterbasedgauge64 read-only
In Packets in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInPkts.
                           hpnicfIfStatFlowHCOutPkts 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.4 counterbasedgauge64 read-only
Out packets in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutPkts.
                           hpnicfIfStatFlowHCInBytes 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.5 counterbasedgauge64 read-only
In bytes in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInBytes.
                           hpnicfIfStatFlowHCOutBytes 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.6 counterbasedgauge64 read-only
Out bytes in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutBytes.
           hpnicfIfControl 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2
               hpnicfRTParentIfTable 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1 no-access
This table contains all interfaces that can create sub interface.
                   hpnicfRTParentIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1 no-access
This entry describes a interface that can create sub interface.
                       hpnicfRTParentIfIndex 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.1 integer32 no-access
The index of interface that can creat sub interface. The value is the same as ifIndex value for this interface.
                       hpnicfRTMinSubIfOrdinal 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.2 integer32 read-only
The minimum ordinal of the sub interface can be created.
                       hpnicfRTMaxSubIfOrdinal 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.3 integer32 read-only
The max ordinal of the sub interface can be created.
               hpnicfRTSubIfTable 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2 no-access
This table contains objects to create or delete sub interfaces. To create a sub interface, a valid parent interface must be specified by hpnicfRTSubIfParentIfIndex and the hpnicfRTSubIfOrdinal must be in the range between hpnicfRTMinSubIfOrdinal and hpnicfRTMaxSubIfOrdinal of the parent interface from hpnicfRTParentIfTable. Sub interfaces are logical virtual interfaces configured on a main interface. The main interface can be either a physical interface (such as a Layer 3 Ethernet interface) or a logical interface (such as an MFR interface). The subinterfaces on a main interface share the physical layer parameters of the main interface but can have link layer and network layer parameters of their own. Disabling or enabling a subinterface does not affect the main interface, but the main interface status change affects the subinterfaces. The subinterfaces cannot operate normally unless the main interface is connected. A single physical interface containing multiple subinterfaces enables you to network in a more flexible way. You can create subinterfaces for the following physical interfaces: Ethernet interface. An Ethernet subinterface associated with no VLAN supports only IPX, while an Ethernet subinterface associated with a VLAN supports both IP and IPX. WAN interfaces with their data link layer protocols being frame relay, whose subinterfaces support IP and IPX. WAN interfaces with their data link layer protocols being X.25, whose subinterfaces support IP and IPX. ATM interface, whose subinterfaces support only IP.
                   hpnicfRTSubIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1 no-access
The hpnicfRTSubIfTable entry items
                       hpnicfRTSubIfParentIfIndex 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.1 integer32 no-access
The parent interface index. The value should be the same as the hpnicfRTParentIfIndex.
                       hpnicfRTSubIfOrdinal 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.2 integer32 no-access
The ordinal of sub interface. It should between hpnicfRTMinSubIfOrdinal and hpnicfRTMaxSubIfOrdinal of the parent interface.
                       hpnicfRTSubIfSubIfIndex 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.3 integer32 read-only
The ifIndex value of the sub interface
                       hpnicfRTSubIfSubIfDesc 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.4 displaystring read-only
The name of the interface
                       hpnicfRTSubIfRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.5 rowstatus read-only
Operation status.
               hpnicfIfLinkModeTable 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3 no-access
This table contains objects to get or set the link mode of an interface. According to the layer at which the device processes received data packets, Ethernet interfaces can operate in bridge or route mode.
                   hpnicfIfLinkModeEntry 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1 no-access
The interface link mode table entry
                       hpnicfIfLinkModeIndex 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.1 integer32 no-access
The value is same as ifIndex.
                       hpnicfIfLinkMode 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.2 integer read-write
The current link mode of the interface If hpnicfIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface. Enumeration: 'bridgeMode': 1, 'routeMode': 2.
                       hpnicfIfLinkModeSwitchSupport 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.3 truthvalue read-only
Whether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interfaces can operate only in bridge or route mode.
           hpnicfIfInterfaces 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3
               hpnicfIfPhysicalNumber 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.1 integer32 read-only
Represents the number of physical interfaces in the device.
               hpnicfIfTable 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2 no-access
A list of interface entries. The number of entries is given by the value of IfNumber.
                   hpnicfIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1 no-access
An entry containing management information applicable to a particular interface.
                       hpnicfIfUpDownTimes 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.1 integer32 read-only
The interface's up/down times, since the device was initialized.
                       hpnicfIfMtu 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.2 integer32 read-write
The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram, this is the size of the largest network datagram that can be sent on the interface.
                       hpnicfIfBandwidthRate 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.3 integer32 read-only
The rate of the bandwidth for an interface.
                       hpnicfIfDiscardPktRate 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.4 integer32 read-only
The rate of the discarded packets for an interface.
                       hpnicfIfStatusKeepTime 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.5 timeticks read-only
The time since the interface entered its current operational state.
                       hpnicfIfInNUcastPkts 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.6 counter64 read-only
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
                       hpnicfIfOutNUcastPkts 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.7 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address.
                       hpnicfIfIsPoe 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.8 truthvalue read-only
Whether the interface supports poe.
                       hpnicfIfOperStatus 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.9 integer read-only
Current status of the interface. In testing state, no operational packets can be forwarded. If ifAdminStatus is down, hpnicfIfOperStatus should be admindown. If ifAdminStatus is changed to up, hpnicfIfOperStatus should change to up if the interface is ready to send and receive network traffic; otherwise, it should stay in down state. Enumeration: 'down': 2, 'admindown': 4, 'testing': 3, 'up': 1.
                       hpnicfIfDownTimes 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.10 integer32 read-only
Number of times the interface went down, since the device was initialized.
       hpnicfIfExtTrap 1.3.6.1.4.1.11.2.14.11.15.2.40.3
           hpnicfIfExtTrapPrex 1.3.6.1.4.1.11.2.14.11.15.2.40.3.0
               hpnicfIfBandwidthUsageHigh 1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.1
The notification is generated when the rate of the bandwidth for the interface exceeds the upper limit.
               hpnicfIfDiscardPktRateHigh 1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.2
The notification is generated when the rate of the discarded packets for the interface exceeds the upper limit.
           hpnicfIfExtTrapObject 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1
               hpnicfIfExtTrapCfgTable 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1 no-access
The trap configuration table.
                   hpnicfIfExtTrapCfgEntry 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1 no-access
An entry for this table.
                       hpnicfIfBandwidthUpperLimit 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1.1 integer32 read-write
The rate of the bandwidth upper limit for an interface.
                       hpnicfIfDiscardPktRateUpperLimit 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1.2 integer32 read-write
The rate of the discarded packets upper limit for an interface.