HPN-ICF-DOT11S-MESH-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPN-ICF-DOT11S-MESH-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpnicfDot11sMesh 1.3.6.1.4.1.11.2.14.11.15.2.75.11
The file defines a MIB to provide MESH configuration information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Mesh A network consisting of two or more mesh points which communicate with each other via mesh services. Mesh Point (MP) An IEEE 802.11 entity that contains an IEEE 802.11-conformant medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM) that supports mesh services. Mesh Access Point (MAP) A mesh point that is collocated with one or more access points. Mesh Portal Point (MPP) A mesh point that is collocated with one or more portals. Mesh Link A link between two MPs.
       hpnicfDot11sConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1
           hpnicfDot11sMeshGlobalPara 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.1
               hpnicfDot11sMeshMkdID 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.1.1 macaddress read-write
This object represents the mesh key distributor identifier (MKD-ID). If the MKD-ID is not configured, the value is '00:00:00:00:00:00'.
           hpnicfDot11sMeshPflTable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2 no-access
This table is used to configure mesh profile. A mesh profile is created and mapped to a MP so that it can provide mesh services to other MPs which have the same mesh ID. When the mesh profile is enabled, all of the object in this table can not be modified except hpnicfDot11sMeshPflEnable. The mesh profile can not be deleted when it is bound with the radio.
               hpnicfDot11sMeshPflEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1 no-access
Each entry contains information of a mesh profile.
                   hpnicfDot11sMeshPflIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.1 integer32 no-access
This object represents the index of the mesh profile.
                   hpnicfDot11sMeshPflMeshID 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.2 octet string read-only
This object represents the mesh ID of the mesh profile. The string length of this object is zero when the mesh ID is not configured. If the mesh ID is not configured, hpnicfDot11sMeshPflEnable can not be set to 'true'.
                   hpnicfDot11sMeshPflBindIntNum 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.3 integer32 read-only
This object represents the specified mesh interface number binding to the mesh profile. If the value is set to -1, the binding will be removed. If the mesh interface is not specified, the value of hpnicfDot11sMeshPflEnable can not be set to 'true'.
                   hpnicfDot11sMeshPflKeepAlive 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.4 integer32 read-only
This object represents the mesh link keep-alive interval.
                   hpnicfDot11sMeshPflBackhaulRate 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.5 integer32 read-only
This object represents the link backhaul rate.
                   hpnicfDot11sMeshMkdServEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.6 truthvalue read-only
This object indicates whether the mesh key distributor (MKD) service for the mesh profile is enabled. 'true': The MKD service for the mesh profile is enabled. 'false': The MKD service for the mesh profile is disabled.
                   hpnicfDot11sMeshPflEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.7 truthvalue read-only
This object indicates whether the mesh profile is enabled. 'true': The mesh profile is enabled. 'false': The mesh profile is disabled.
                   hpnicfDot11sMeshPflRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.8 rowstatus read-only
The status of this table entry.
           hpnicfDot11sMpPlcyTable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3 no-access
This table is used to configure MP policy. There is 'default_mp_plcy' on system by default and its index is 1. The 'default_mp_plcy' can not be deleted or modified. The MP policy can not be deleted when it is applied to a radio. It can not be modified when it is applied to an enabled radio.
               hpnicfDot11sMpPlcyEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1 no-access
Each entry contains information of a MP policy.
                   hpnicfDot11sMpPlcyIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.1 integer32 no-access
This object represents the MP policy index.
                   hpnicfDot11sMpPlcyName 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.2 octet string read-only
This object represents the MP policy name. MP policy can not be created with name 'a', 'al', 'all' or 'default_mp_plcy'. Modification is not supported.
                   hpnicfDot11sMpPlcyInitEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.3 truthvalue read-only
This object indicates whether the link initiation for the MP policy is enabled. 'true': The link initiation for the MP policy is enabled. 'false': The link initiation for the MP policy is disabled.
                   hpnicfDot11sMlspEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.4 truthvalue read-only
This object indicates whether the mesh link switch protocol (MLSP) is enabled. 'true': MLSP is enabled. 'false': MLSP is disabled.
                   hpnicfDot11sProbReqInterval 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.5 integer32 read-only
This object represents the probe request interval.
                   hpnicfDot11sRoleAuthEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.6 truthvalue read-only
This object indicates whether the device can play as the role of an authenticator.
                   hpnicfDot11sLinkHoldRSSI 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.7 integer32 read-only
This object represents the link-hold receive signal strength indicator (RSSI).
                   hpnicfDot11sLinkHoldTime 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.8 integer32 read-only
This object represents the link-hold time.
                   hpnicfDot11sSwitchMargin 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.9 integer32 read-only
This object represents the link-switch margin.
                   hpnicfDot11sLinkSaturationRSSI 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.10 integer32 read-only
This object represents the link saturation receive signal strength indicator (RSSI).
                   hpnicfDot11sLinkRateMode 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.11 integer read-only
This object represents the rate mode of the mesh link. Enumeration: 'fixed': 1, 'realtime': 2.
                   hpnicfDot11sMaxLinkNum 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.12 integer32 read-only
This object represents the maximum number of the mesh link.
                   hpnicfDot11sMpPlcyRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.13 rowstatus read-only
The status of this table entry.
           hpnicfDot11sMlspCfgTable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4 no-access
This table is used to configure MLSP proxy MAC address. Only if the specified MP policy is modifiable and the MLSP is enabled, the row of this table can be created and deleted. The row of this table can not be modified.
               hpnicfDot11sMlspCfgEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1 no-access
Each entry contains information of MLSP proxy MAC address.
                   hpnicfDot11sMlspProxyIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1.1 integer32 no-access
This object represents the MLSP proxy MAC address index.
                   hpnicfDot11sMlspProxyMac 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1.2 macaddress read-only
This object represents the MLSP proxy MAC address.
                   hpnicfDot11sMlspRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1.3 rowstatus read-only
The status of this table entry.
           hpnicfDot11sRadioCfgTable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5 no-access
This table is used to configure mesh to the specified radio.
               hpnicfDot11sRadioCfgEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1 no-access
Each entry contains mesh configure information of the specified radio.
                   hpnicfDot11sCfgRadioIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1.1 hpnicfdot11radioelementindex no-access
Represents index of the radio.
                   hpnicfDot11sMeshPflMap 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1.2 integer32 read-write
This object represents the number of the mesh profile mapped to the specified radio. The value is zero when the radio is not binding mesh profile.
                   hpnicfDot11sMpPlcyMap 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1.3 integer32 read-write
This object represents the index of the MP policy mapped to the specified radio. The MP policy is 'default_mp_plcy' when the radio is not binding user-defined MP policy. The index of 'default_mp_plcy' is 1. This object can not be modified when the radio is enabled.
           hpnicfDot11sAPCfgTable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.6 no-access
This table is used to configure mesh to the specified AP.
               hpnicfDot11sAPCfgEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.6.1 no-access
Each entry contains mesh configure information of the specified AP.
                   hpnicfDot11sPortalEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.6.1.1 truthvalue read-write
This object indicates whether the portal service is enabled. 'true': The portal service is enabled. 'false': The portal service is disabled.
       hpnicfDot11sWDSConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.11.2
           hpnicfDot11sWDSPeerMacTable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1 no-access
This table is used to configure wireless distribution system (WDS). The row of this table can not be modified.
               hpnicfDot11sWDSPeerMacEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1 no-access
Each entry contains information of WDS.
                   hpnicfDot11sWDSPeerMacIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1.1 integer32 no-access
This object represents the peer MAC address index.
                   hpnicfDot11sWDSPeerMacAddrss 1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1.2 macaddress read-only
This object represents the peer MAC address.
                   hpnicfDot11sWDSPeerMacRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1.3 rowstatus read-only
The status of this table entry.
       hpnicfDot11sMeshStatusGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3
           hpnicfDot11sMeshLinkStatusTable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1 no-access
This table is used to represent the status of mesh link.
               hpnicfDot11sMeshLinkStatusEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1 no-access
Each entry contains status information of mesh link.
                   hpnicfDot11sMeshLinkIfIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.1 unsigned32 no-access
This object represents the interface index of the mesh link.
                   hpnicfDot11sMeshLinkName 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.2 octet string read-only
This object represents the name of the mesh link.
                   hpnicfDot11sMeshLinkBSSID 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.3 macaddress read-only
This object represents the BSS ID of the mesh link.
                   hpnicfDot11sMeshLinkPeerMac 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.4 macaddress read-only
This object represents the peer MAC address of the mesh link.
                   hpnicfDot11sMeshLinkExistDuration 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.5 integer32 read-only
This object represents the time for which the link has been up.
                   hpnicfDot11sMeshLinkType 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.6 integer read-only
This object represents the type for the link. Enumeration: 'active': 1, 'dormant': 2.
           hpnicfDot11sMeshLinkStatisTable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2 no-access
This table is used to represent the statistical information of mesh link.
               hpnicfDot11sMeshLinkStatisEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1 no-access
Each entry contains statistical information of mesh link.
                   hpnicfDot11sMeshLinkStatIfIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.1 unsigned32 no-access
This object represents the interface index of the mesh link.
                   hpnicfDot11sMeshLinkNbrIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.2 unsigned32 read-only
Represents the neighbor index of the mesh link.
                   hpnicfDot11sMeshLinkRxTotByte 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.3 counter32 read-only
Represents the amount of bytes that the mesh link received.
                   hpnicfDot11sMeshLinkRxTotPkt 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.4 counter32 read-only
Represents the amount of packets that the mesh link received.
                   hpnicfDot11sMeshLinkRxUniPkt 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.5 counter32 read-only
Represents the amount of unicast packets that the mesh link received.
                   hpnicfDot11sMeshLinkRxBrocPkt 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.6 counter32 read-only
Represents the amount of broadcast packets that the mesh link received.
                   hpnicfDot11sMeshLinkRxMuticPkt 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.7 counter32 read-only
Represents the amount of multicast packets that the mesh link received.
                   hpnicfDot11sMeshLinkRxDiscPkt 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.8 counter32 read-only
Represents the amount of packets that the mesh link discarded.
                   hpnicfDot11sMeshLinkTxTotByte 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.9 counter32 read-only
Represents the total amount of bytes that the mesh link transmitted.
                   hpnicfDot11sMeshLinkTxTotPkt 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.10 counter32 read-only
Represents the total amount of packets that the mesh link transmitted.
                   hpnicfDot11sMeshLinkTxUniPkt 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.11 counter32 read-only
Represents the amount of unicast packets that the mesh link transmitted.
                   hpnicfDot11sMeshLinkTxBrocPkt 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.12 counter32 read-only
Represents the amount of broadcast packets that the mesh link transmitted.
                   hpnicfDot11sMeshLinkTxMuticPkt 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.13 counter32 read-only
Represents the amount of multicast packets that the mesh link transmitted.
                   hpnicfDot11sMeshLinkTxDiscPkt 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.14 counter32 read-only
Represents the amount of discarded packets that the mesh link transmitted.
                   hpnicfDot11sMeshLinkIFName 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.15 octet string read-only
Represents the name of mesh link interface.
           hpnicfDot11sMeshNbrStatusTable 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3 no-access
This table represents the status information for the neighbors of MP.
               hpnicfDot11sMeshNbrStatusEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1 no-access
Each entry of the table will provide status information for the neighbors of MP.
                   hpnicfDot11sMeshNbrIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.1 unsigned32 no-access
Represents the index for the neighbor.
                   hpnicfDot11sMeshNbrRadioID 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.2 unsigned32 read-only
Represents the radio ID of the neighbor.
                   hpnicfDot11sMeshLocalMeshID 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.3 octet string read-only
Represents the local mesh ID.
                   hpnicfDot11sMeshNbrMeshID 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.4 octet string read-only
Represents the mesh ID of the neighbor.
                   hpnicfDot11sMeshNbrBSSID 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.5 macaddress read-only
Represents the BSS ID of the neighbor.
                   hpnicfDot11sMeshNbrPeerMac 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.6 macaddress read-only
Represents the MAC address of the peer neighbor.
                   hpnicfDot11sMeshLinkInMp 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.7 unsigned32 read-only
Represents the interface index of mesh link that used to connect with this neighbor.
                   hpnicfDot11sMeshMPLinkStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.8 integer read-only
Represents the status of mesh link that used to connect with this neighbor. Enumeration: 'down': 3, 'processing': 1, 'up': 2.
                   hpnicfDot11sMeshNbrChannel 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.9 unsigned32 read-only
Represents the channel number used by this neighbor.
                   hpnicfDot11sMeshNbrLinkDuration 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.10 integer32 read-only
Represents the duration of mesh link that used to connect with this neighbor.
                   hpnicfDot11sMeshNbrRSSI 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.11 integer32 read-only
Represents the RSSI of mesh link that used to connect with this neighbor.
                   hpnicfDot11sMeshNbrSNR 1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.12 integer32 read-only
Represents the SNR of mesh link that used to connect with this neighbor.