HPN-ICF-DHCPRELAY-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPN-ICF-DHCPRELAY-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC, HPN-ICF-OID-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpnicfDhcpRelay 1.3.6.1.4.1.11.2.14.11.15.2.58
DHCPR MIB
       hpnicfDHCPRMibObject 1.3.6.1.4.1.11.2.14.11.15.2.58.1
           hpnicfDHCPRIfSelectTable 1.3.6.1.4.1.11.2.14.11.15.2.58.1.1 no-access
A table for configuring relay mode for interfaces.
               hpnicfDHCPRIfSelectEntry 1.3.6.1.4.1.11.2.14.11.15.2.58.1.1.1 no-access
An entry for configuring relay mode for an interface.
                   hpnicfDHCPRIfSelectRelayMode 1.3.6.1.4.1.11.2.14.11.15.2.58.1.1.1.1 integer read-write
If the value is on, the DHCP relay function would be enabled on this interface. Enumeration: 'on': 1, 'off': 2.
           hpnicfDHCPRIpToGroupTable 1.3.6.1.4.1.11.2.14.11.15.2.58.1.2 no-access
A table for configuring ip addresses for DHCP server groups.
               hpnicfDHCPRIpToGroupEntry 1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1 no-access
An entry for configuring ip addresses for a DHCP server group.
                   hpnicfDHCPRIpToGroupGroupId 1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.1 integer32 no-access
Group identifier of DHCP server group.
                   hpnicfDHCPRIpToGroupServerIpType 1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.2 inetaddresstype no-access
Ip address type of DHCP server.
                   hpnicfDHCPRIpToGroupServerIp 1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.3 inetaddress no-access
Ip address of DHCP server.
                   hpnicfDHCPRIpToGroupRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.4 rowstatus read-only
Operation status of this table entry. Three actions are used: active, createAndGo, destroy.
           hpnicfDHCPRIfToGroupTable 1.3.6.1.4.1.11.2.14.11.15.2.58.1.3 no-access
A table for configuring DHCP server groups for interfaces.
               hpnicfDHCPRIfToGroupEntry 1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1 no-access
An entry for configuring DHCP server group for an interface.
                   hpnicfDHCPRIfToGroupGroupId 1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1.1 integer32 read-write
The DHCP server group for this interface.
                   hpnicfDHCPRIfToGroupRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1.2 rowstatus read-only
Operation status of this table entry. Three actions are used: active, createAndGo, destroy
           hpnicfDHCPRAddrCheckTable 1.3.6.1.4.1.11.2.14.11.15.2.58.1.4 no-access
A table containing the states of dhcp security address check switchs for interfaces.
               hpnicfDHCPRAddrCheckEntry 1.3.6.1.4.1.11.2.14.11.15.2.58.1.4.1 no-access
An entry containing the state of dhcp security address check switch for an interface.
                   hpnicfDHCPRAddrCheckSwitch 1.3.6.1.4.1.11.2.14.11.15.2.58.1.4.1.1 integer read-write
The state of dhcp security address check switch for this interface. It has two defined values: enabled and disabled. If the value is enabled, the address check function would be enabled. The default value is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
           hpnicfDHCPRSecurityTable 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5 no-access
A table containing the information of DHCP security.
               hpnicfDHCPRSecurityEntry 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1 no-access
An entry containing the information of DHCP security.
                   hpnicfDHCPRSecurityClientIpAddrType 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.1 inetaddresstype no-access
DHCP client's net ip address type
                   hpnicfDHCPRSecurityClientIpAddr 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.2 inetaddress no-access
DHCP client's net ip address
                   hpnicfDHCPRSecurityClientMacAddr 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.3 macaddress read-write
DHCP client's mac address
                   hpnicfDHCPRSecurityClientProperty 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.4 integer read-write
Property of client address Enumeration: 'dynamic': 2, 'static': 1.
                   hpnicfDHCPRSecurityClientRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.5 rowstatus read-only
Operation status of this table entry. Three actions are used: active, createAndGo, destroy
           hpnicfDHCPRStatisticsGroup 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6
               hpnicfDHCPRRxClientPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.1 unsigned32 read-only
The total number of the packets received from DHCP clients by DHCP relay.
               hpnicfDHCPRTxClientPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.2 unsigned32 read-only
The total number of the brodcast packets transmitted to DHCP clients by DHCP relay.
               hpnicfDHCPRRxServerPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.3 unsigned32 read-only
The total number of the packets received from DHCP Servers by DHCP relay.
               hpnicfDHCPRTxServerPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.4 unsigned32 read-only
The total number of the packets transmitted to DHCP Servers by DHCP relay.
               hpnicfDHCPRDiscoverPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.5 unsigned32 read-only
The total number of the DHCP Discover packets handled by DHCP relay.
               hpnicfDHCPRRequestPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.6 unsigned32 read-only
The total number of the DHCP Request packets handled by DHCP relay.
               hpnicfDHCPRDeclinePktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.7 unsigned32 read-only
The total number of the DHCP Decline packets handled by DHCP relay.
               hpnicfDHCPRReleasePktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.8 unsigned32 read-only
The total number of the DHCP Release packets handled by DHCP relay.
               hpnicfDHCPRInformPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.9 unsigned32 read-only
The total number of the DHCP Inform packets handled by DHCP relay.
               hpnicfDHCPROfferPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.10 unsigned32 read-only
The total number of the DHCP Offer packets handled by DHCP relay.
               hpnicfDHCPRAckPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.11 unsigned32 read-only
The total number of the DHCP Ack packets handled by DHCP relay.
               hpnicfDHCPRNakPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.12 unsigned32 read-only
The total number of the DHCP Nak packets handled by DHCP relay.
               hpnicfDHCPRStatisticsReset 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.13 truthvalue read-write
This node only supports set operation. If the value is true,it will clear all of the packet statistics.
           hpnicfDHCPRCycleGroup 1.3.6.1.4.1.11.2.14.11.15.2.58.1.7
               hpnicfDHCPRCycleStatus 1.3.6.1.4.1.11.2.14.11.15.2.58.1.7.1 integer read-write
If the value is on, the cycle function would be enabled. Enumeration: 'on': 1, 'off': 2.
           hpnicfDHCPRConfigOption82Group 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8
               hpnicfDHCPROption82Switch 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.1 integer read-write
If the value is enabled, DHCP relay supporting option 82 function would be enabled. Enumeration: 'disabled': 2, 'enabled': 1.
               hpnicfDHCPROption82HandleStrategy 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.2 integer read-write
The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one. Enumeration: 'replace': 3, 'drop': 1, 'keep': 2.
               hpnicfDHCPRConfigOption82IfTable 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3 no-access
A table containing the information of DHCP option 82. This table depends on hpnicfDHCPRIfToGroupTable. An entry of this table will be created when an entry of hpnicfDHCPRIfToGroupTable is created.
                   hpnicfDHCPRConfigOption82IfEntry 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1 no-access
An entry containing the information of DHCP option 82.
                       hpnicfDHCPROption82IfSwitch 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.1 integer read-write
If DHCP relay supports option 82 functions, the value is 'enabled'. If DHCP relay does not support option 82 functions, the value is 'disabled'. Enumeration: 'disabled': 2, 'enabled': 1.
                       hpnicfDHCPROption82IfStrategy 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.2 integer read-write
The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one. Enumeration: 'replace': 3, 'drop': 1, 'keep': 2.
                       hpnicfDHCPROption82IfFormat 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.3 integer read-write
The format of DHCP relay option 82. 'normal' is the standard format. 'verbose' is the detailed format. Enumeration: 'verbose': 2, 'normal': 1.
                       hpnicfDHCPROption82IfNodeType 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.4 integer read-write
Property of DHCP relay option 82 verbose format. The value can be set by user only when the value of hpnicfDHCPROption82IfFormat is set with 'verbose'. If the value of hpnicfDHCPROption82IfFormat is 'normal', the value is automatically set with 'invalid'. the value can not be set with 'invalid' by user. 'mac' indicates the option 82 verbose format is filled in with the mac of DHCP relay input interface. If the value of hpnicfDHCPROption82IfFormat is set with 'verbose', the value is automatically set with 'mac'. 'sysname' indicates the option 82 verbose format is filled in with the name of the DHCP relay. 'userdefine' indicates the option 82 verbose format is filled in with the string defined by user. If the value is set with 'userdefine', the value of hpnicfDHCPROption82IfUsrDefString must be set simultaneously. Enumeration: 'sysname': 3, 'mac': 2, 'userdefine': 4, 'invalid': 1.
                       hpnicfDHCPROption82IfUsrDefString 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.5 octet string read-write
The string defined by user to fill in the option 82 verbose format. If the value of hpnicfDHCPROption82IfFormat is 'normal', or the value of hpnicfDHCPROption82IfNodeType is 'mac' or 'sysname', it is set with a null string automatically and can not be modified by user. It must be set with a non-zero length string when the value of hpnicfDHCPROption82IfNodeType is set with 'userdefine'.