HPICF-SAVI-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPICF-SAVI-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, HP-ICF-OID, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpicfSaviMIB 1.3.6.1.4.1.11.2.14.11.5.2.1
This MIB Module is designed to support the configuration and monitoring of DHCPv6 Snooping protocol. This MIB module was based off the IETF draft of SAVI mib, which was designed to support configuration and monitoring of SAVI protocol by Changging An(acq@cernet.edu.cn) and Jiahai Yang(yang@cernet.edu.cu), https://tools.ietf.org/html/draft-an-savi-mib-02.\u201d.
     hpicfSaviObjects 1.3.6.1.4.1.11.2.14.11.5.2.1.1
         hpicfSaviObjectsPortTable 1.3.6.1.4.1.11.2.14.11.5.2.1.1.1 no-access
The table containing hpicfSAVI parameters of each anchor.
             hpicfSaviObjectsPortEntry 1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1 no-access
An entry containing hpicfSAVI running parameters of an anchor.
                 hpicfSaviObjectsPortIPVersion 1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1.1 inetversion no-access
The IP version.
                 hpicfSaviObjectsPortIfIndex 1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1.2 interfaceindex no-access
The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
                 hpicfSaviObjPortDhcpTrustAttr 1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1.3 integer read-write
The DHCP trust attribute of the port. enable(1), the attribute is set. disable(2), the attribute is not set. Enumeration: 'enable': 1, 'disable': 2.
                 hpicfSaviObjectsPortFilteringNum 1.3.6.1.4.1.11.2.14.11.5.2.1.1.1.1.4 unsigned32 read-write
The max filtering number of the Port.
         hpicfSaviObjectsBindingTable 1.3.6.1.4.1.11.2.14.11.5.2.1.1.2 no-access
The table containing the state of binding between source address and anchor.
             hpicfSaviObjectsBindingEntry 1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1 no-access
An entry containing the state of binding between source address and anchor. Entries are keyed on the source IP address type, binding type, anchor, and source IP address.
                 hpicfSaviObjBindingIpAddrType 1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.1 inetaddresstype no-access
IP address type of the binding source IP.
                 hpicfSaviObjectsBindingType 1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.2 integer no-access
IP address assignment methods. Enumeration: 'dhcp': 3, 'manual': 1, 'send': 4, 'slaac': 2.
                 hpicfSaviObjectsBindingIfIndex 1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.3 interfaceindex no-access
The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
                 hpicfSaviObjectsBindingIpAddress 1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.4 inetaddress no-access
The binding source IP address.
                 hpicfSaviObjectsBindingMacAddr 1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.5 macaddress read-only
The binding source mac address.
                 hpicfSaviObjectsBindingLifetime 1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.6 timeinterval read-only
The remaining lifetime of the entry. TimeInterval is defined in RFC 2579, it's a period of time, measured in units of 0.01 seconds, and the value is (0..2147483647). If hpicfSaviObjectsBindingType=manual, a value of 2147483647 represents infinity.
                 hpicfSaviObjectsBindingRowStatus 1.3.6.1.4.1.11.2.14.11.5.2.1.1.2.1.7 rowstatus read-only
The status of this row, by which new entries may be created, or old entries deleted from this table. An Entry can be created or deleted only when hpicfSaviObjectsBindingType=manual. Row statuses createAndWait(5), notReady(3) and notInService(2) are not supported.
         hpicfSaviObjectsFilteringTable 1.3.6.1.4.1.11.2.14.11.5.2.1.1.3 no-access
The table containing the filtering entries.
             hpicfSaviObjectsFilteringEntry 1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1 no-access
An entry containing the filtering parameters. Entries are keyed on the source IP address type, anchor, and source IP address.
                 hpicfSaviObjFilteringIpAddrType 1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1.1 inetaddresstype no-access
IP address type of the filtering source IP.
                 hpicfSaviObjectsFilteringIfIndex 1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1.2 interfaceindex no-access
The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
                 hpicfSaviObjFilteringIpAddr 1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1.3 inetaddress no-access
The filtering source IP address.
                 hpicfSaviObjectsFilteringMacAddr 1.3.6.1.4.1.11.2.14.11.5.2.1.1.3.1.4 macaddress read-only
The filtering source mac address.
     hpicfSaviConformance 1.3.6.1.4.1.11.2.14.11.5.2.1.2
         hpicfSaviCompliances 1.3.6.1.4.1.11.2.14.11.5.2.1.2.1
             hpicfSaviCompliance 1.3.6.1.4.1.11.2.14.11.5.2.1.2.1.1
The compliance statement for entities which implement hpicfSAVI protocol.
         hpicfSaviGroups 1.3.6.1.4.1.11.2.14.11.5.2.1.2.2
             hpicfSaviportGroup 1.3.6.1.4.1.11.2.14.11.5.2.1.2.2.1
The if group contains objects corresponding to the hpicfSavi running parameters of each anchor.
             hpicfSavibindingGroup 1.3.6.1.4.1.11.2.14.11.5.2.1.2.2.2
The binding group contains the binding information of anchor and source ip address.
             hpicfSavifilteringGroup 1.3.6.1.4.1.11.2.14.11.5.2.1.2.2.3
The filtering group contains the filtering information of anchor and source ip address.