HP-TUNNEL-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HP-TUNNEL-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, TUNNEL-MIB, Q-BRIDGE-MIB, INET-ADDRESS-MIB, HP-ICF-OID, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpTunnelMIB 1.3.6.1.4.1.11.2.14.11.5.1.77
Renamed hpTunnelNotifications
       hpTunnelNotifications 1.3.6.1.4.1.11.2.14.11.5.1.77.0
           hpTunnelIcmpErrorRcvd 1.3.6.1.4.1.11.2.14.11.5.1.77.0.1
This notification is generated when the tunnel source recevied an ICMP destination unreachable error message from the router in the underlay network with the IP address hpTunnelMTUDropRouterAddr for the reason of MTU violation.
       hpTunnelObjects 1.3.6.1.4.1.11.2.14.11.5.1.77.1
           hpTunnelConfigTable 1.3.6.1.4.1.11.2.14.11.5.1.77.1.1 no-access
This table is used to provision for a tunnel without having to configure the source and destination ends of the tunnels.
               hpTunnelConfigEntry 1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1 no-access
A set of objects that are used to create a tunnel.
                   hpTunnelID 1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.1 integer32 no-access
The tunnel number to configure a tunnel.
                   hpTunnelIfIndex 1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.2 interfaceindex read-only
The interface index associated with this tunnel entry. Since this Object is read-only, it is deprecated in favor of hpTunnelInterfaceIndex.
                   hpTunnelRowStatus 1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.3 rowstatus read-only
The status of this row, by which new entries may be created, or old entries deleted from this table.
                   hpTunnelInterfaceIndex 1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.4 interfaceindex read-only
The tunnel interface index associated with this tunnel entry.
           hpTunnelIfTable 1.3.6.1.4.1.11.2.14.11.5.1.77.1.2 no-access
This table augments the tunnelIfTable
               hpTunnelIfEntry 1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1 no-access
A set of objects as an augment to tunnelIfTable.
                   hpTunnelIfPMTU 1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.1 integer read-write
Enable/Disable path mtu discovery for this tunnel. Enumeration: 'enable': 1, 'disable': 2.
                   hpTunnelIfNUD 1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.2 integer read-write
Enable/Disable Neighbor Unreachability Detection for this tunnel. Enumeration: 'enable': 1, 'disable': 2.
                   hpTunnelIfMTU 1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.3 unsigned32 read-write
The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
                   hpTunnelEncapsMethod 1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.4 hptunneltype read-write
The encapsulation method used by the tunnel.
                   hpTunnelIpsecName 1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.5 snmpadminstring read-write
Specifies the IPSEC profile name for tunnel. This mentioned IPSEC profile can be attached with tunnel to avail the protection for tunnel traffic
           hpTunnelInetConfigTable 1.3.6.1.4.1.11.2.14.11.5.1.77.1.3 no-access
This table augments the tunnelInetConfigTable
               hpTunnelInetConfigEntry 1.3.6.1.4.1.11.2.14.11.5.1.77.1.3.1 no-access
A set of objects as an augment to tunnelInetConfigTable.
                   hpTunnelInetConfigEncapsMethod 1.3.6.1.4.1.11.2.14.11.5.1.77.1.3.1.1 hptunneltype read-write
The encapsulation method used by the tunnel.
           hpicfVlanTunnelMappingTable 1.3.6.1.4.1.11.2.14.11.5.1.77.1.4 no-access
A table that maps a VLAN to a tunnel. The tunnel to VLAN mapping implies that tunnel will carry bidirectional traffic of a VLAN.
               hpicfVlanTunnelMappingEntry 1.3.6.1.4.1.11.2.14.11.5.1.77.1.4.1 no-access
An entry containing the mapping of a VLAN to a tunnel. The VLAN-to-tunnel mapping allows all the VLAN traffic to flow through the associated tunnel.
                   hpicfVLANIndex 1.3.6.1.4.1.11.2.14.11.5.1.77.1.4.1.1 vlanindex no-access
This object refers to the VLANID that is mapped to a tunnel
                   hpicfTunnelIfIndex 1.3.6.1.4.1.11.2.14.11.5.1.77.1.4.1.2 interfaceindex no-access
This object specifies the tunnel interface index which is mapped to a speciifc VLAN.
                   hpicfVlanTunnelMappingRowStatus 1.3.6.1.4.1.11.2.14.11.5.1.77.1.4.1.3 rowstatus read-only
The row status of a VLAN to tunnel mapping entry.
           hpicfUDPTunnelTypeTable 1.3.6.1.4.1.11.2.14.11.5.1.77.1.5 no-access
A table containing the information about the UDP tunnel types.
               hpicfUDPTunnelTypeEntry 1.3.6.1.4.1.11.2.14.11.5.1.77.1.5.1 no-access
An entry containing the information on a UDP tunnel type.
                   hpicfUDPTunnelType 1.3.6.1.4.1.11.2.14.11.5.1.77.1.5.1.1 integer read-only
This object is used to configure the UDP tunnel type. A value of none(0) indicates that the tunnel is not a UDP tunnel. A value of remotemirror(1) indicates that the UDP tunnel configured is a remote mirroring tunnel. A value of vxlan(2) indicates that the UDP tunnel configured is a VXLAN tunnel. Enumeration: 'none': 0, 'vxlan': 2, 'remotemirror': 1.
           hpTunnelNotifyScalars 1.3.6.1.4.1.11.2.14.11.5.1.77.1.6
               hpTunnelMTUDropRouterAddrType 1.3.6.1.4.1.11.2.14.11.5.1.77.1.6.1 inetaddresstype no-access
The IP address type of the router that sent the ICMP destination unreachable message.
               hpTunnelMTUDropRouterAddr 1.3.6.1.4.1.11.2.14.11.5.1.77.1.6.2 inetaddress no-access
IP address of the router that sent the ICMP destination unreachable message.
               hpTunnelMTUDropRouterMTU 1.3.6.1.4.1.11.2.14.11.5.1.77.1.6.3 integer32 no-access
The interface MTU of the router that sent the ICMP destination unreachable message.
               hpTunnelMTUDropTunnelSrcAddrType 1.3.6.1.4.1.11.2.14.11.5.1.77.1.6.4 inetaddresstype no-access
The address type of the source IP address of the original packet that is encapsulated by the VXLAN/Tap tunnel interface.
               hpTunnelMTUDropTunnelSource 1.3.6.1.4.1.11.2.14.11.5.1.77.1.6.5 inetaddress no-access
The source IP address of the original packet that is encapsulated by the VXLAN/Tap tunnel interface.
               hpTunnelMTUDropTunnelDstAddrType 1.3.6.1.4.1.11.2.14.11.5.1.77.1.6.6 inetaddresstype no-access
The address type of the destination IP address of the original packet that is encapsulated by the VXLAN/Tap tunnel interface.
               hpTunnelMTUDropTunnelDest 1.3.6.1.4.1.11.2.14.11.5.1.77.1.6.7 inetaddress no-access
The destination IP address of the original packet that is encapsulated by the VXLAN/Tap tunnel interface.
               hpTunnelMTUDropInIfIndex 1.3.6.1.4.1.11.2.14.11.5.1.77.1.6.8 interfaceindex no-access
The interface index of the inbound VLAN of the ICMP destination unreachable packet.
               hpTunnelMTUDropNotifyEnable 1.3.6.1.4.1.11.2.14.11.5.1.77.1.6.9 integer read-write
This enables or disables the virtual network notifications. Enumeration: 'enable': 1, 'disable': 2.
       hpTunnelConformance 1.3.6.1.4.1.11.2.14.11.5.1.77.2
           hpTunnelMIBCompliances 1.3.6.1.4.1.11.2.14.11.5.1.77.2.1
               hpTunnelMIBCompliance 1.3.6.1.4.1.11.2.14.11.5.1.77.2.1.1
The compliance statement for the HP Tunnel MIB.
               hpTunnelMIBCompliance2 1.3.6.1.4.1.11.2.14.11.5.1.77.2.1.2
The compliance statement for the HP Tunnel MIB.
           hpTunnelMIBGroups 1.3.6.1.4.1.11.2.14.11.5.1.77.2.2
               hpTunnelProvisionGroup 1.3.6.1.4.1.11.2.14.11.5.1.77.2.2.1
A collection of objects to support creation of a tunnel.
               hpTunnelInetConfigGroup 1.3.6.1.4.1.11.2.14.11.5.1.77.2.2.2
A collection of objects to augment tunnelInetConfigTable.
               hpVlanTunnelMappingGroup 1.3.6.1.4.1.11.2.14.11.5.1.77.2.2.3
A collection of objects to support VLAN to tunnel mapping.
               hpTunnelProvisionGroup2 1.3.6.1.4.1.11.2.14.11.5.1.77.2.2.4
A collection of objects to support creation of a tunnel.
               hpTunnelNotifyScalarsGroup 1.3.6.1.4.1.11.2.14.11.5.1.77.2.2.5
Group of objects required for notifications.
               hpTunnelNotificationsGroup 1.3.6.1.4.1.11.2.14.11.5.1.77.2.2.6
The notifications for the VXLAN/Tap tunnels.