HP-SWITCH-ERROR-MSG-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HP-SWITCH-ERROR-MSG-MIB
Download as:   
HP-ICF-OID, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpSwitchErrorMsgMIB 1.3.6.1.4.1.11.2.14.11.5.1.68
This MIB module is for the Switch Error Messages reporting with SNMP
       hpSwitchErrorMsgObjects 1.3.6.1.4.1.11.2.14.11.5.1.68.1
           hpSwitchErrorMsgTable 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1 no-access
This table contains the error status of the most recent SNMP operation for each of the management entities. This table contains 10 application entries with 10 error message entries for each application. This table holds maximum 100 error message entries
               hpSwitchErrorMsgEntry 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1 no-access
An entry contains the information on the handle of the entity and the corresponding error messages indexed with the SNMP sequence code.
                   hpSwitchErrorEntityType 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.1 integer no-access
The management entity from which a SNMP request arrives. For the CLI application the value will be (2). The value will be (3) if the request is from a web application. If the management entity is a Net Management application the value will be either (4) or (5) depending on whether they are carrying an IPv4 or an IPv6 address. For the OA (Open Architecture application the value will be (6). Enumeration: 'ipV4Address': 4, 'oaApplication': 6, 'webSession': 3, 'ipV6Address': 5, 'cliSession': 2, 'others': 1.
                   hpSwitchErrorEntityHandle 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.2 octet string no-access
The handle corresponding to the application performing the SNMP operation. The handle will denote an IP Address, if the application is a Net management application. Or it will be the session id of the CLI, WEB or the OA application
                   hpSwitchErrorSnmpSeqCode 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.3 integer32 no-access
This denotes the SNMP sequence code sent by the requester.
                   hpSwitchErrorTime 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.4 dateandtime read-only
This denotes the Date and Time when the SNMP set `request processing has failed.
                   hpSwitchErrorFailedOID 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.5 object identifier read-only
This denotes the OID of the SNMP Object for which the SNMP set request processing has failed.
                   hpSwitchEntityErrorMsg 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.6 octet string read-only
An error message having descriptive information about the error for the failed SNMP set request.
                   hpSwitchSnmpErrorCode 1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.7 integer32 read-only
The SNMP error code which is retuned when the SNMP set request failed.
       hpSwitchErrorMsgMIBConformance 1.3.6.1.4.1.11.2.14.11.5.1.68.2
           hpSwitchErrorMsgMIBCompliances 1.3.6.1.4.1.11.2.14.11.5.1.68.2.1
               hpSwitchErrorMsgMIBCompliance 1.3.6.1.4.1.11.2.14.11.5.1.68.2.1.1
The compliance statement for switch error message entities
           hpSwitchErrorMsgMIBGroups 1.3.6.1.4.1.11.2.14.11.5.1.68.2.2
               hpSwitchErrorMsgMIBGroup 1.3.6.1.4.1.11.2.14.11.5.1.68.2.2.1
A collection of objects for switch error message.