HP-SN-IP-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HP-SN-IP-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 snRtIpGeneral 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1
     snRtClearArpCache 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.1 clearstatus read-write
clear(1) will clear arp cache table.
     snRtClearIpCache 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.2 clearstatus read-write
clear(1) will clear ip route cache table.
     snRtClearIpRoute 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.3 clearstatus read-write
clear(1) will clear ip route table.
     snRtBootpServer 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.4 ipaddress read-write
IP address of bootp server to which bootp packet need to be relayed.
     snRtBootpRelayMax 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.5 integer read-write
Maximum number of hop the bootp packet should travel.
     snRtArpAge 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.6 integer read-write
The time in minutes an ARP entry can be valid without relearning. 0 - Don't not age.
     snRtIpIrdpEnable 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.7 rtrstatus read-write
Perform router advertisement on this box.
     snRtIpLoadShare 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.8 rtrstatus read-write
If more than one route available, use them to share load.
     snRtIpProxyArp 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.9 rtrstatus read-write
Enable/disable proxy arp function in the box.
     snRtIpRarp 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.10 rtrstatus read-write
Enable/disable RARP server.
     snRtIpTtl 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.11 integer read-write
The time to live value to be used in IP header of IP packet generated by the box.
     snRtIpSetAllPortConfig 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.12 integer read-write
The value of this object is an index number of a snRtIpPortConfigTable row (i.e. snRtIpPortConfigPortIndex), which is the selected row to copy all of its read-writable data (i.e. snRtIpPortMtu and snRtIpPortEncap) to the rest of the rows in snRtIpPortConfigTable. Note: prior setting this object, all the intended data of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire ip interface configuration table. The previous setting will be overwritten by the new one.
     snRtIpFwdCacheMaxEntries 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.13 integer read-only
The maximum number of ip forwarding table entries.
     snRtIpFwdCacheCurEntries 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.14 integer read-only
The current number of ip forwarding table entries.
     snRtIpMaxStaticRouteEntries 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.15 integer read-only
The maximum number of static route entries in the static route table.
     snRtIpDirBcastFwd 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.16 rtrstatus read-write
Enable/Disable directed broadcast forwarding.
     snRtIpLoadShareNumOfPaths 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.17 integer read-write
Number of routes are used to share load.
     snRtIpLoadShareMaxPaths 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.18 integer read-only
Maximum number of routes can be configured to share load.
     snRtIpLoadShareMinPaths 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.19 integer read-only
Minimum number of routes can be configured to share load.
     snRtIpProtocolRouterId 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.20 ipaddress read-write
Router Id for all IP Protocols.
     snRtIpSourceRoute 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.21 rtrstatus read-write
Enable/Disable source routing support, ability to drop the source routing packets.
 snRtIpStaticRouteTable 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2 no-access
IP static/default route table.
     snRtIpStaticRouteEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1 no-access
An entry in the IP static route table.
         snRtIpStaticRouteIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.1 integer read-only
The table index for a static route entry.
         snRtIpStaticRouteDest 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.2 ipaddress read-write
Destination IP address. 0.0.0.0 for default route.
         snRtIpStaticRouteMask 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.3 ipaddress read-write
Subnet mask associated with the destination IP address. 0.0.0.0 for default route mask.
         snRtIpStaticRouteNextHop 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.4 ipaddress read-write
IP address of next hop router that is located on one of the directly attached IP subnet.
         snRtIpStaticRouteMetric 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.5 integer read-write
The metrics to next hop router.
         snRtIpStaticRouteRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.6 rowsts read-write
To create or delete a static route entry.
         snRtIpStaticRouteDistance 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.7 integer read-write
Administration distance.
 snRtIpFilterTable 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3 no-access
IP filter table.
     snRtIpFilterEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1 no-access
An entry in the IP filter table.
         snRtIpFilterIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.1 integer read-only
The table index for a filter entry.
         snRtIpFilterAction 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.2 integer read-write
Action to take if the ip packet match with this filter. Enumeration: 'qosEnabled': 2, 'deny': 0, 'permit': 1.
         snRtIpFilterProtocol 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.3 integer read-write
Transport protocol. 0 means don't care
         snRtIpFilterSourceIp 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.4 ipaddress read-write
Source IP address.
         snRtIpFilterSourceMask 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.5 ipaddress read-write
Source IP subnet mask.
         snRtIpFilterDestIp 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.6 ipaddress read-write
Destination IP address.
         snRtIpFilterDestMask 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.7 ipaddress read-write
Destination IP subnet mask.
         snRtIpFilterOperator 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.8 integer read-write
Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number Enumeration: 'notEqual': 4, 'less': 3, 'greater': 1, 'equal': 2.
         snRtIpFilterOperand 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.9 integer read-write
For now this only refers to transport protocol port number. 0 means NA
         snRtIpFilterRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.10 rowsts read-write
To create or delete a filter entry.
         snRtIpFilterEstablished 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.11 rtrstatus read-write
Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This additional filter only applies to TCP transport protocol.
         snRtIpFilterQosPriority 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.12 integer read-write
The router L4 Qos Priority values are: low(0) -- low prority high(1) -- high prority. The Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) Enumeration: 'level0': 0, 'level1': 1, 'level2': 2, 'level3': 3, 'level4': 4, 'level5': 5, 'level6': 6, 'level7': 7.
 snRtIpRarpTable 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4 no-access
IP RARP table.
     snRtIpRarpEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1 no-access
An entry in the IP Rarp table.
         snRtIpRarpIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.1 integer read-only
The table index for a Rarp entry.
         snRtIpRarpMac 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.2 octet string read-write
The Mac address for a Rarp entry.
         snRtIpRarpIp 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.3 ipaddress read-write
The IP address for a Rarp entry.
         snRtIpRarpRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.4 rowsts read-write
To create or delete a Rarp entry.
 snRtStaticArpTable 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5 no-access
IP static arp table.
     snRtStaticArpEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1 no-access
An entry in the IP static arp table.
         snRtStaticArpIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.1 integer read-only
The table index for a static arp entry.
         snRtStaticArpIp 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.2 ipaddress read-write
The IP address for a static arp entry.
         snRtStaticArpMac 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.3 octet string read-write
The Mac address for a static arp entry.
         snRtStaticArpPort 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.4 portindex read-write
The port index for a static arp entry.
         snRtStaticArpRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.5 rowsts read-write
To create or delete a Static Arp entry.
 snRtIpPortAddrTable 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6 no-access
IP port address table.
     snRtIpPortAddrEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1 no-access
An entry in the IP Port Address table.
         snRtIpPortAddrPortIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.1 portindex read-only
The port index for port address entry.
         snRtIpPortAddress 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.2 ipaddress read-only
The port IP address.
         snRtIpPortSubnetMask 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.3 ipaddress read-write
The port IP address subnet mask.
         snRtIpPortAddrType 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.4 integer read-write
The port IP address type. Enumeration: 'primary': 1, 'secondary': 2.
         snRtIpPortRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.5 rowsts read-write
To create or delete a port address entry.
 snRtIpPortAccessTable 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7 no-access
IP port access table.
     snRtIpPortAccessEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1 no-access
An entry in the IP Port access table.
         snRtIpPortAccessPortIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.1 portindex read-only
The port index for port access entry.
         snRtIpPortAccessDirection 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.2 integer read-only
The incoming or outgoing check for port access. Enumeration: 'out': 2, 'in': 1.
         snRtIpPortAccessFilters 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.3 octet string read-write
1st octet correspond to 1st filter number and so on.
         snRtIpPortAccessRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.4 rowsts read-write
To create or delete a port access entry.
 snRtIpPortConfigTable 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8 no-access
IP port Config table.
     snRtIpPortConfigEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1 no-access
An entry in the IP Port Config table.
         snRtIpPortConfigPortIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.1 portindex read-only
The port index for port config entry.
         snRtIpPortMtu 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.2 integer read-write
The maximun transfer unit.
         snRtIpPortEncap 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.3 integer read-write
Data link encapsulation to be used on the IP frame transmitted on the port. Enumeration: 'snap': 2, 'ethernet': 1, 'ppp': 4, 'hdlc': 3.
         snRtIpPortMetric 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.4 integer read-write
The metric.
         snRtIpPortDirBcastFwd 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.5 rtrstatus read-write
Enable/Disable directed broadcast forwarding on the port.
 snRtBcastFwd 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9
     snRtBcastFwdGeneral 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.1
         snRtUdpBcastFwdEnable 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.1.1 rtrstatus read-write
Enable or disable UDP broadcast forwarding service. When UDP broadcast forwarding is enabled, default entries are added to the UDP broadcast forwarding port table. When it is disabled, UDP broadcast forwarding port table is flushed to empty.
     snRtUdpBcastFwdPort 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2
         snRtUdpBcastFwdPortTable 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1 no-access
This table contains a list of UDP port numbers for which forwarding UDP broadcast is enabled.
             snRtUdpBcastFwdPortEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1 no-access
An entry of the UDP broadcast forwarding port table.
                 snRtUdpBcastFwdPortIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.1 integer read-only
The table index for a UDP broadcast forwarding port entry.
                 snRtUdpBcastFwdPortNumber 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.2 integer read-write
UDP port number for which UDP broadcast forwarding is enabled.
                 snRtUdpBcastFwdPortRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.3 rowsts read-write
To create or delete a UDP broadcast forwarding port entry.
     snRtUdpHelper 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3
         snRtUdpHelperTable 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1 no-access
UDP helper table.
             snRtUdpHelperEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1 no-access
An entry of the UDP helper table.
                 snRtUdpHelperPortIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.1 portindex read-only
The port index for a UDP helper entry.
                 snRtUdpHelperIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.2 integer read-only
The table index for a UDP helper entry.
                 snRtUdpHelperAddr 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.3 ipaddress read-write
The UDP helper address. This is the address that UDP packets will be forwarded. It can be a helper address or a subnet broadcast address. But it cannot be 255.255.255.255 or 0.0.0.0.
                 snRtUdpHelperRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.4 rowsts read-write
To create or delete a UDP helper entry.
 snRtIpTraceRoute 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10
       snRtIpTraceRouteGeneral 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1
           snRtIpTraceRouteTargetAddr 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.1 ipaddress read-write
Target IP address of which trace route is performed.
           snRtIpTraceRouteMinTtl 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.2 integer read-write
Minimum TTL value carried in the first probe packet.
           snRtIpTraceRouteMaxTtl 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.3 integer read-write
Maximum TTL value carried in the last probe packet.
           snRtIpTraceRouteTimeOut 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.4 integer read-write
Time out period (in seconds) to wait for the response from the probe packet (i,e, the ICMP packet).
           snRtIpTraceRouteControl 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.5 integer read-write
Only 'start' and 'abort' are writable values; 'success', 'failure' and 'inProgress' are readeable (or returned) values. Writing 'start' to this object to initiate the trace route operation. snRtIpTraceRouteDestAddr must have been init- ialized before 'start' is writen. This object will return 'inProgress' after trace route operation has started. During the 'inProgress' state, writing 'abort' to this object will stop the current trace route operation. If the destination address is reached, this object returned 'success'. snRtIpTraceRouteResultTable contains the routes (and the target address) to reach the destination address. If the destination address does not reach, timeout, or ending TTL reached, 'failure' is returned. Enumeration: 'start': 1, 'inProgress': 5, 'abort': 2, 'success': 3, 'failure': 4.
       snRtIpTraceRouteResult 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2
           snRtIpTraceRouteResultTable 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1 no-access
Trace route result table.
               snRtIpTraceRouteResultEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1 no-access
An entry of the trace route result table.
                   snRtIpTraceRouteResultIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.1 integer read-only
The table index for a trace route result entry.
                   snRtIpTraceRouteResultAddr 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.2 ipaddress read-only
The router or the target address of which forms part of the route to reach the destination address.
                   snRtIpTraceRouteResultRoundTripTime1 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.3 timeticks read-only
The round trip time between the first probe packet transmitted and the reponse ICMP packet received.
                   snRtIpTraceRouteResultRoundTripTime2 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.4 timeticks read-only
The round trip time between the second probe packet transmitted and the reponse ICMP packet received.
 snRtIpFwdCacheTable 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11 no-access
IP forwarding cache table.
       snRtIpFwdCacheEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1 no-access
An entry in the IP forwarding cache table.
           snRtIpFwdCacheIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.1 integer read-only
The table index for a ip forwarding cache table entry.
           snRtIpFwdCacheIp 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.2 ipaddress read-only
The IP address of a station.
           snRtIpFwdCacheMac 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.3 octet string read-only
The Mac address of an IP station.
           snRtIpFwdCacheNextHopIp 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.4 ipaddress read-only
The next hop router IP address.
           snRtIpFwdCacheOutgoingPort 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.5 integer read-only
The outgoing port of which packets will forward to. Return port value of zero to indicate no outgoing port associated to this entry. Non-zero value has the following meanings: The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. For virtual router interface, slot number is 15, port number is the virtual router port from 1 to 60.
           snRtIpFwdCacheType 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.6 integer read-only
The 'dynamic' or 'permanent' type for a ip forwarding cache table entry. Enumeration: 'permanent': 2, 'dynamic': 1.
           snRtIpFwdCacheAction 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.7 integer read-only
The action to take. Enumeration: 'dropPacket': 7, 'waitForArp': 4, 'forUs': 3, 'other': 1, 'complexFilter': 5, 'forward': 2, 'icmpDeny': 6.
           snRtIpFwdCacheFragCheck 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.8 integer read-only
Check for fragmentation. Enumeration: 'disabled': 0, 'enabled': 1.
           snRtIpFwdCacheSnapHdr 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.9 integer read-only
Apply SNAP encapsulation. Enumeration: 'disabled': 0, 'enabled': 1.
           snRtIpFwdCacheVLanId 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.10 integer read-only
The VLAN ID for a ip forwarding cache table entry. Return VLAN ID value of zero to indicate no VLAN associated to this entry.
 snRtIpRipGeneral 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1
     snRtIpRipEnable 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.1 rtrstatus read-write
Enable/disable ip rip routing.
     snRtIpRipUpdateTime 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.2 integer read-write
Ip rip update interval in seconds.
     snRtIpRipRedisEnable 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.3 rtrstatus read-write
Enable/disable redistribution to rip.
     snRtIpRipRedisDefMetric 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.4 integer read-write
Default metric to be used when redistribute route to rip.
     snRtIpRipSetAllPortConfig 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.5 integer read-write
The value of this object is an index number of a snRtIpRipPortConfigTable row (i.e. snRtIpRipPortConfigPortIndex), which is the selected row to copy all of its read-writable data (i.e. snRtIpRipPortVersion and snRtIpRipPortPoisonReverse) to the rest of the rows in snRtIpRipPortConfigTable. Note: prior setting this object, all the intended data of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire ip rip port configuration table. The previous setting will be overwritten by the new one.
     snRtIpRipGblFiltList 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.6 octet string read-write
An ip rip global filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable with the corresponding filter ID number (i.e. snRtIpRipRouteFilterId) must have been created before a filter list is initialized.
     snRtIpRipFiltOnAllPort 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.7 integer read-write
Apply the ip rip global filter list snRtIpRipGblFiltList to all interfaces. This object is used to add all rip filter lists and delete all rip filter lists to/from all interfaces. Prior to sending this command, snRtIpRipGblFiltList must have been set to a proper filter list. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation failed, then a SET with value of (2) or (3) returns error code 'GenError'. If succeed, entries in the filter list are deleted immediately. The following values can be returned on reads: valid(1)....set operation is done and is valid. Enumeration: 'addAllInBound': 4, 'addAllOutBound': 5, 'valid': 1, 'deleteAllInBound': 2, 'deleteAllOutBound': 3.
     snRtIpRipDistance 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.8 integer read-write
Administration distance.
 snRtIpRipPortConfigTable 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2 no-access
IP Rip port Config table.
     snRtIpRipPortConfigEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1 no-access
An entry in the IP Rip Port Config table.
         snRtIpRipPortConfigPortIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.1 portindex read-only
The port index for ip rip port config entry.
         snRtIpRipPortVersion 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.2 integer read-write
The ip rip version on this port. Enumeration: 'disabled': 0, 'v2Only': 2, 'v1CompatibleV2': 3, 'v1Only': 1.
         snRtIpRipPortPoisonReverse 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.3 rtrstatus read-write
Enable/disable poison reverse.
         snRtIpRipPortLearnDefault 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.4 integer read-write
Apply the RIP router protocol learn-default option to the interface. The values that can be written are: disabled(0)...deleted the learn default option. enabled(1)....enabled the learn default option. Enumeration: 'disabled': 0, 'enabled': 1.
 snRtIpRipRedisTable 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3 no-access
IP Rip Redistribution table.
     snRtIpRipRedisEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1 no-access
An entry in the IP Rip Redistribution table.
         snRtIpRipRedisIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.1 integer read-only
The table index for a IP Rip Redistribution entry.
         snRtIpRipRedisAction 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.2 action read-write
The action to take when match this IP Rip Redistribution entry.
         snRtIpRipRedisProtocol 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.3 integer read-write
The protocol to be distributed. other(1) cannot be used for SNMP-SET. Enumeration: 'bgp': 5, 'ospf': 4, 'all': 2, 'other': 1, 'static': 3.
         snRtIpRipRedisIp 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.4 ipaddress read-write
The ip address of the ip route to be distributed. 0.0.0.0 - all routes
         snRtIpRipRedisMask 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.5 ipaddress read-write
The ip subnet mask of the ip route to be distributed.
         snRtIpRipRedisMatchMetric 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.6 metric read-write
The metric of the route to be matched to determine the redistribution. 0 - any metric value
         snRtIpRipRedisSetMetric 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.7 integer read-write
The new metric of the route to be advertised. 0 - use the default metric.
         snRtIpRipRedisRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.8 rowsts read-write
To create or delete a Redistribution entry.
 snRtIpRipRouteFilterTable 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4 no-access
ip rip route filter table.
     snRtIpRipRouteFilterEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1 no-access
An entry of the ip rip route filter table.
         snRtIpRipRouteFilterId 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.1 integer read-only
The filter ID to identify a filter entry.
         snRtIpRipRouteFilterAction 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.2 action read-write
Action to take if the ip rip packet matched with this filter.
         snRtIpRipRouteFilterIpAddr 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.3 ipaddress read-write
Route IP address to compare with any route IP addresses in a ip rip packet. IP address 0.0.0.0 always compare equals to any route IP addresses in any ip rip packets.
         snRtIpRipRouteFilterSubnetMask 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.4 ipaddress read-write
Subnet mask to apply to the route IP address in a ip rip packet, the result is compared to snRtIpRipRouteFilterIpAddr. If snRtIpRipRouteFilterIpAddr is 0.0.0.0, this subnet mask value is ignored.
         snRtIpRipRouteFilterRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.5 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2).....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
 snRtIpRipNbrFilterTable 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5 no-access
ip rip neighbor filter table.
     snRtIpRipNbrFilterEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1 no-access
An entry of the ip rip neighbor filter table.
         snRtIpRipNbrFilterId 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.1 integer read-only
The filter ID to identify a filter entry.
         snRtIpRipNbrFilterAction 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.2 action read-write
Action to take if the ip rip packet source IP address compares equal to the source IP address in this filter.
         snRtIpRipNbrFilterSourceIp 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.3 ipaddress read-write
Source IP address to compare with the source IP address in a ip rip packet. IP address 0.0.0.0 always compares equal to any source IP addresses in any ip rip packets.
         snRtIpRipNbrFilterRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.4 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2).....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
 snRtIpRipPortAccessTable 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6 no-access
ip interface rip access table.
     snRtIpRipPortAccessEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1 no-access
An entry of the ip interface rip access table.
         snRtIpRipPortAccessPort 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.1 portindex read-only
The ip interface to which the rip filter applies.
         snRtIpRipPortAccessDir 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.2 integer read-only
The access direction of incoming packet filter or outgoing packet filter. Enumeration: 'out': 2, 'in': 1.
         snRtIpRipPortAccessFilterList 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.3 octet string read-write
An ip rip filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable with the corresponding filter ID number (i.e. snRtIpRipRouteFilterId) must have been created before a filter list is initialized.
         snRtIpRipPortAccessRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.4 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2).....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
 snDvmrpMIBObjects 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1
     snDvmrpVersion 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.1 displaystring read-only
The router's DVMRP version information.
     snDvmrpEnable 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.2 rtrstatus read-write
Enable or disable DVMRP on this router.
     snDvmrpGenerationId 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.3 integer read-only
The generation identifier for the routing process. This is used by neighboring routers to detect whether pruning information should be resent.
     snDvmrpProbeInterval 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.4 integer read-write
This is the time interval at which the router sends out probe messages to discover neighbour routers. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
     snDvmrpReportInterval 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.5 integer read-write
This is the time interval at which the router sends out full report messages. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
     snDvmrpTriggerInterval 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.6 integer read-write
This is the time interval at which triggered updates are sent out. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
     snDvmrpNeighborRouterTimeout 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.7 integer read-write
This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
     snDvmrpRouteExpireTime 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.8 integer read-write
This is the time interval after which the route expires and becomes unreachable. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
     snDvmrpRouteDiscardTime 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.9 integer read-write
This is the time interval after which a route is discarded from the route table. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
     snDvmrpPruneAge 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.10 integer read-write
This is the duration of time for which the prune state is stored. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
     snDvmrpGraftRetransmitTime 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.11 integer read-write
This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
     snDvmrpDefaultRoute 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.12 ipaddress read-write
This is the IP address of a router that is connected to one of the directly attached subnet. If a multicast route is not present on the local router, this default route will be used for multicast forwarding. snDvmrpEnable must be 'enabled' before this object is writen.
     snDvmrpVInterfaceTable 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13 no-access
The (conceptual) table listing the router's DVMRP virtual interfaces. snDvmrpEnable must be 'enabled' before this table is read or writen.
           snDvmrpVInterfaceEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1 no-access
An entry (conceptual row) in the snDvmrpVInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides.
               snDvmrpVInterfaceVifIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.1 integer read-only
The ifIndex value of this DVMRP virtual interface.
               snDvmrpVInterfaceType 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.2 integer read-write
The type of this DVMRP virtual interface, whether it uses a tunnel, a physical interface for which we are a querier, or a physical interface for which we are not a querier. For write operation, this object can only accept tunnel(1) to configure a tunnel interface or subnet(3) to configure a physical interface. Enumeration: 'tunnel': 1, 'subnet': 3, 'querier': 2.
               snDvmrpVInterfaceOperState 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.3 integer read-only
The current operational state of this DVMRP virtual interface. Enumeration: 'down': 2, 'up': 1.
               snDvmrpVInterfaceLocalAddress 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.4 ipaddress read-write
The IP address of the local end of this DVMRP virtual interface.
               snDvmrpVInterfaceRemoteAddress 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.5 ipaddress read-write
The IP address of the remote end of this DVMRP virtual interface. For a tunnel, this is the IP address of the neighboring router. For a subnet, this is the subnet address.
               snDvmrpVInterfaceRemoteSubnetMask 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.6 ipaddress read-only
The subnet mask for a directly connected subnet. For a tunnel, this should be 0.0.0.0.
               snDvmrpVInterfaceMetric 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.7 integer read-write
The distance metric for this DVMRP virtual interface which is used to calculate distance vectors.
               snDvmrpVInterfaceTtlThreshold 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.8 integer read-write
This is the minimum time-to-live value to forward the packets out of this virtual interface.
               snDvmrpVInterfaceAdvertiseLocal 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.9 rtrstatus read-write
Enable or disable the advertising of this local route.
               snDvmrpVInterfaceEncapsulation 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.10 rtrstatus read-write
Enable or disable the encapsulation of the DVMRP control packets when using IPINIP encapsulation.
               snDvmrpVInterfaceStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.11 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2)....Setting it to 'valid' has the effect of changing the row to operative. Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
     snDvmrpNeighborTable 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14 no-access
The (conceptual) table listing the router's DVMRP neighbors, as discovered by receiving Neighbor Probe messages. snDvmrpEnable must be 'enabled' before this table is read.
           snDvmrpNeighborEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1 no-access
An entry (conceptual row) in the snDvmrpNeighborTable.
               snDvmrpNeighborEntryIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.1 integer read-only
The table entry index.
               snDvmrpNeighborVifIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.2 integer read-only
The value of VifIndex for the virtual interface used to reach this DVMRP neighbor.
               snDvmrpNeighborAddress 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.3 ipaddress read-only
The IP address of the DVMRP neighbor for which this entry contains information.
               snDvmrpNeighborUpTime 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.4 timeticks read-only
The time since this DVMRP neighbor (last) became a neighbor of the local router.
               snDvmrpNeighborExpiryTime 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.5 timeticks read-only
The minimum time remaining before this DVMRP neighbor will be aged out.
               snDvmrpNeighborGenerationId 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.6 integer read-only
The neighboring router's generation identifier.
               snDvmrpNeighborMajorVersion 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.7 integer read-only
The neighboring router's major DVMRP version number.
               snDvmrpNeighborMinorVersion 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.8 integer read-only
The neighboring router's minor DVMRP version number.
               snDvmrpNeighborCapabilities 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.9 integer read-only
This object describes the neighboring router's capabilities. The following shows the position of each bit: bit position meaning ----------- ------ 3 mtrace bit 2 generationID bit 1 prune bit 0 leaf bit The leaf bit indicates that the neighbor has only one interface with neighbors. The prune bit indicates that the neighbor supports pruning. The generationID bit indicates that the neighbor sends its generationID in Probe messages. The mtrace bit indicates that the neighbor can handle mtrace requests.
     snDvmrpRouteTable 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15 no-access
The routing table used by DVMRP in place of the unicast routing table. snDvmrpEnable must be 'enabled' before this table is read.
           snDvmrpRouteEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1 no-access
An entry (conceptual row) containing the multicast routing information used by DVMRP in place of the unicast routing information.
               snDvmrpRouteEntryIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.1 integer read-only
The table entry index.
               snDvmrpRouteSource 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.2 ipaddress read-only
The network address which when combined with the corresponding value of snDvmrpRouteSourceMask identifies the sources for which this entry contains multicast routing information.
               snDvmrpRouteSourceMask 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.3 ipaddress read-only
The network mask which when combined with the corresponding value of snDvmrpRouteSource identifies the sources for which this entry contains multicast routing information.
               snDvmrpRouteUpstreamNeighbor 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.4 ipaddress read-only
The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources are received.
               snDvmrpRouteVifIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.5 integer read-only
The value of snDvmrpVInterfaceVifIndex for the virtual interface on which IP datagrams sent by these sources are received.
               snDvmrpRouteMetric 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.6 integer read-only
The distance in hops to the source subnet.
               snDvmrpRouteExpiryTime 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.7 timeticks read-only
The minimum amount of time remaining before this entry will be aged out.
     snDvmrpRouteNextHopTable 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16 no-access
The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. snDvmrpEnable must be 'enabled' before this table is read.
           snDvmrpRouteNextHopEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1 no-access
An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources are routed.
               snDvmrpRouteNextHopSource 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.1 ipaddress read-only
The network address which when combined with the corresponding value of snDvmrpRouteNextHopSourceMask identifies the sources for which this entry specifies a next hop on an outgoing interface.
               snDvmrpRouteNextHopSourceMask 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.2 ipaddress read-only
The network mask which when combined with the corresponding value of snDvmrpRouteNextHopSource identifies the sources for which this entry specifies a next hop on an outgoing interface.
               snDvmrpRouteNextHopVifIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.3 integer read-only
The snDvmrpVInterfaceVifIndex value of the virtual interface for the outgoing interface for this next hop.
               snDvmrpRouteNextHopType 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.4 integer read-only
Type is leaf if no neighbors exist on the outgoing virtual interface. Otherwise, type is branch. Enumeration: 'leaf': 1, 'branch': 2.
     snDvmrpVIfStatTable 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17 no-access
The (conceptual) table listing the router's DVMRP virtual interface statistical counters. snDvmrpEnable must be 'enabled' before this table is read.
           snDvmrpVIfStatEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1 no-access
An entry (conceptual row) in the snDvmrpVIfStatTable.
               snDvmrpVIfStatVifIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.1 integer read-only
The ifIndex value of this DVMRP virtual interface.
               snDvmrpVIfStatInPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.2 counter read-only
The number of packets that have arrived on the DVMRP virtual interface.
               snDvmrpVIfStatOutPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.3 counter read-only
The number of packets that have been sent on the DVMRP virtual interface.
               snDvmrpVIfStatInOctets 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.4 counter read-only
The number of octets that have arrived on the DVMRP virtual interface.
               snDvmrpVIfStatOutOctets 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.5 counter read-only
The number of octets that have been sent on the DVMRP virtual interface.
               snDvmrpVIfStatInProbePkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.6 counter read-only
The number of probe packets that have arrived on the DVMRP virtual interface.
               snDvmrpVIfStatOutProbePkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.7 counter read-only
The number of probe packets that have been sent on the DVMRP virtual interface.
               snDvmrpVIfStatDiscardProbePkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.8 counter read-only
The number of probe packets that have been discarded by the DVMRP virtual interface.
               snDvmrpVIfStatInRtUpdatePkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.9 counter read-only
The number of route update packets that have arrived on the DVMRP virtual interface.
               snDvmrpVIfStatOutRtUpdatePkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.10 counter read-only
The number of route update packets that have been sent on the DVMRP virtual interface.
               snDvmrpVIfStatDiscardRtUpdatePkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.11 counter read-only
The number of route update packets that have been discarded by the DVMRP virtual interface.
               snDvmrpVIfStatInGraftPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.12 counter read-only
The number of graft packets that have arrived on the DVMRP virtual interface.
               snDvmrpVIfStatOutGraftPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.13 counter read-only
The number of graft packets that have been sent on the DVMRP virtual interface.
               snDvmrpVIfStatDiscardGraftPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.14 counter read-only
The number of graft packets that have been discarded by the DVMRP virtual interface.
               snDvmrpVIfStatInGraftAckPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.15 counter read-only
The number of graft acknowledge packets that have arrived on the DVMRP virtual interface.
               snDvmrpVIfStatOutGraftAckPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.16 counter read-only
The number of graft acknowledge packets that have been sent on the DVMRP virtual interface.
               snDvmrpVIfStatDiscardGraftAckPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.17 counter read-only
The number of graft acknowledge packets that have been discarded by the DVMRP virtual interface.
               snDvmrpVIfStatInPrunePkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.18 counter read-only
The number of prune packets that have arrived on the DVMRP virtual interface.
               snDvmrpVIfStatOutPrunePkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.19 counter read-only
The number of prune packets that have been sent on the DVMRP virtual interface.
               snDvmrpVIfStatDiscardPrunePkts 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.20 counter read-only
The number of prune packets that have been discarded by the DVMRP virtual interface.
 snFsrpGlobal 1.3.6.1.4.1.11.2.3.7.11.12.2.7.1
     snFsrpGroupOperMode 1.3.6.1.4.1.11.2.3.7.11.12.2.7.1.1 integer read-write
The FSRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable FSRP enabled(1)...........activate FSRP Enumeration: 'disabled': 0, 'enabled': 1.
     snFsrpIfStateChangeTrap 1.3.6.1.4.1.11.2.3.7.11.12.2.7.1.2 integer read-write
Indicates whether the SNMP agent process is permitted to generate FSRP interface state change traps. Enumeration: 'disabled': 0, 'enabled': 1.
 snFsrpIntf 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2
     snFsrpIfTable 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1 no-access
The FSRP Interface Table describes the interfaces from the viewpoint of FSRP.
         snFsrpIfEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1 no-access
The FSRP Interface Entry describes one interface from the viewpoint of FSRP.
             snFsrpIfPort 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.1 integer read-only
The physical router port of this FSRP interface.
             snFsrpIfIpAddress 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.2 ipaddress read-only
The IP Address of the physical router port of this interface.
             snFsrpIfVirRtrIpAddr 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.3 ipaddress read-write
The IP Address of the Virtual Router for the interface. The Virtual Router IP address need to be configured on the interface before Redundant Router Function can operate on the interface. This address has to be same on all the routers that going to participate in the Redundant Router Function on a given subnet.
             snFsrpIfOtherRtrIpAddr 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.4 ipaddress read-write
The IP Address of the Other Router on this ip subnet that operates FSRP and to whom the Keep Alive message need to be sent by this router. This object must be configured for FSRP to work correctly
             snFsrpIfPreferLevel 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.5 integer read-write
The higher the number the higher the priority is. This parameter decides which router should becomes the Active Router for the interface. A Router with higher priority selected to becomes the Active Router.
             snFsrpIfTrackPortMask 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.6 portmask read-write
This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Standalone router FSRP Track port membership (Not used for Chassis Product)
             snFsrpIfRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.7 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
             snFsrpIfState 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.8 integer read-only
This object specifies the FSRP Router's interface state as: init(0)...initialization state. negotiating(1)...negotiating state. standby(2)...standby state. active(3)...active state. Enumeration: 'standby': 2, 'active': 3, 'init': 0, 'negotiating': 1.
             snFsrpIfKeepAliveTime 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.9 integer read-write
The heart-beat is from 1 to 120 seconds.
             snFsrpIfRouterDeadTime 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.10 integer read-write
The hold time of the Fsrp router is from 3 to 255 seconds.
             snFsrpIfChassisTrackPortMask 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.11 octet string read-write
This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis router FSRP Track port membership
 snGblRtGeneral 1.3.6.1.4.1.11.2.3.7.11.12.2.8.1
     snGblRtRouteOnly 1.3.6.1.4.1.11.2.3.7.11.12.2.8.1.1 rtrstatus read-write
If this object is 'enabled', this switching router will only route packets. If this object is 'disabled', this switching router will first route packets. If route cannot perform, it will switch packets.
 snPimMIBObjects 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1
     snPimEnable 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.1 rtrstatus read-write
Enable or disable PIM on this router.
     snPimNeighborRouterTimeout 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.2 integer read-write
This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
     snPimHelloTime 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.3 integer read-write
This is the interval at which hello message is sent out an interface to the neighbouring router. This is used to detect the presence or abscense of a neighbouring router. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
     snPimPruneTime 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.4 integer read-write
This is the duration of time for which the prune state is stored. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
     snPimGraftRetransmitTime 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.5 integer read-write
This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
     snPimInactivityTime 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.6 integer read-write
This is the interval after which the forwarding entry is deleted. When a packet is received for a group entry, this time is reset. This is used to only keep the forwarding entries for the active sessions. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
     snPimVInterfaceTable 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7 no-access
The (conceptual) table listing the router's PIM virtual interfaces. snPimEnable must be 'enabled' before this table is read or writen.
         snPimVInterfaceEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1 no-access
An entry (conceptual row) in the snPimVInterfaceTable.
             snPimVInterfaceVifIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.1 integer read-only
The ifIndex value of this PIM virtual interface.
             snPimVInterfaceType 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.2 integer read-write
The type of PIM virtual interface, whether it uses a tunnel or a physical interface. Enumeration: 'tunnel': 1, 'subnet': 2.
             snPimVInterfaceLocalAddress 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.3 ipaddress read-write
The IP address of the local end of this PIM virtual interface.
             snPimVInterfaceLocalSubnetMask 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.4 ipaddress read-only
The network mask for the IP address of the PIM virtual interface. For a tunnel, this should be 0.0.0.0.
             snPimVInterfaceRemoteAddress 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.5 ipaddress read-write
The IP address of the remote end of this PIM virtual interface.
             snPimVInterfaceDR 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.6 ipaddress read-only
The Designated Router on this PIM virtual interface. For point-to-point interfaces, this object has the value 0.0.0.0.
             snPimVInterfaceTtlThreshold 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.7 integer read-write
This is the minimum time-to-live value to forward the packets out of this interface.
             snPimVInterfaceStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.8 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative. valid(2)....Setting it to 'valid' has the effect of changing the row to operative. Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
     snPimNeighborTable 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8 no-access
The (conceptual) table listing the router's PIM neighbors. snPimEnable must be 'enabled' before this table is read.
         snPimNeighborEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1 no-access
An entry (conceptual row) in the snPimNeighborTable.
             snPimNeighborEntryIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.1 integer read-only
The table entry index.
             snPimNeighborVifIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.2 integer read-only
The value of VifIndex for the virtual interface used to reach this PIM neighbor.
             snPimNeighborAddress 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.3 ipaddress read-only
The IP address of the PIM neighbor for which this entry contains information.
             snPimNeighborUpTime 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.4 timeticks read-only
The time since this PIM neighbor (last) became a neighbor of the local router.
             snPimNeighborExpiryTime 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.5 timeticks read-only
The minimum time remaining before this PIM neighbor will be aged out.
     snPimVIfStatTable 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9 no-access
The (conceptual) table listing the router's PIM virtual interface statistical counters. snPimEnable must be 'enabled' before this table is read.
         snPimVIfStatEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1 no-access
An entry (conceptual row) in the snPimVIfStatTable.
             snPimVIfStatVifIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.1 integer read-only
The ifIndex value of this PIM virtual interface.
             snPimVIfStatInJoinPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.2 counter read-only
The number of join packets that have arrived on the PIM virtual interface.
             snPimVIfStatOutJoinPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.3 counter read-only
The number of join packets that have been sent on the PIM virtual interface.
             snPimVIfStatDiscardJoinPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.4 counter read-only
The number of join packets that have been discarded by the PIM virtual interface.
             snPimVIfStatInPrunePkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.5 counter read-only
The number of prune packets that have arrived on the PIM virtual interface.
             snPimVIfStatOutPrunePkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.6 counter read-only
The number of prune packets that have been sent on the PIM virtual interface.
             snPimVIfStatDiscardPrunePkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.7 counter read-only
The number of prune packets that have been discarded by the PIM virtual interface.
             snPimVIfStatInAssertPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.8 counter read-only
The number of assert packets that have arrived on the PIM virtual interface.
             snPimVIfStatOutAssertPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.9 counter read-only
The number of assert packets that have been sent on the PIM virtual interface.
             snPimVIfStatDiscardAssertPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.10 counter read-only
The number of assert packets that have been discarded by the PIM virtual interface.
             snPimVIfStatInHelloPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.11 counter read-only
The number of hello packets that have arrived on the PIM virtual interface.
             snPimVIfStatOutHelloPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.12 counter read-only
The number of hello packets that have been sent on the PIM virtual interface.
             snPimVIfStatDiscardHelloPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.13 counter read-only
The number of hello packets that have been discarded by the PIM virtual interface.
             snPimVIfStatInGraftPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.14 counter read-only
The number of graft packets that have arrived on the PIM virtual interface.
             snPimVIfStatOutGraftPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.15 counter read-only
The number of graft packets that have been sent on the PIM virtual interface.
             snPimVIfStatDiscardGraftPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.16 counter read-only
The number of graft packets that have been discarded by the PIM virtual interface.
             snPimVIfStatInGraftAckPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.17 counter read-only
The number of graft acknowledge packets that have arrived on the PIM virtual interface.
             snPimVIfStatOutGraftAckPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.18 counter read-only
The number of graft acknowledge packets that have been sent on the PIM virtual interface.
             snPimVIfStatDiscardGraftAckPkts 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.19 counter read-only
The number of graft acknowledge packets that have been discarded by the PIM virtual interface.
   snVrrpGlobal 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1
       snVrrpGroupOperMode 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.1 integer read-write
The VRRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP enabled(1)...........activate VRRP Enumeration: 'disabled': 0, 'enabled': 1.
       snVrrpIfStateChangeTrap 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.2 integer read-write
Indicates whether the SNMP agent process is permitted to generate VRRP interface state change traps. Enumeration: 'disabled': 0, 'enabled': 1.
       snVrrpIfMaxNumVridPerIntf 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.3 integer read-only
Indicates the maximum number of VRID per interface.
       snVrrpIfMaxNumVridPerSystem 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.4 integer read-only
Indicates the maximum number of VRID per system.
       snVrrpClearVrrpStat 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.5 integer read-write
Clear VRRP statistics command. Enumeration: 'clear': 1, 'normal': 0.
   snVrrpIntf 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2
       snVrrpIfTable 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1 no-access
The VRRP Interface Table describes the interfaces from the viewpoint of VRRP.
           snVrrpIfEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1 no-access
The VRRP Interface Entry describes one interface from the viewpoint of VRRP.
               snVrrpIfPort 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.1 integer read-only
The IP port of this VRRP interface.
               snVrrpIfAuthType 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.2 integer read-write
The authentication type of this interface. Enumeration: 'ipAuthHeader': 2, 'noAuth': 0, 'simpleTextPasswd': 1.
               snVrrpIfAuthPassword 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.3 octet string read-write
The simple text password is allowed if only if the snVrrpIfAuthType type is simpleTextPasswd(1).
               snVrrpIfRxHeaderErrCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.4 counter read-only
The received Header error counts in this interface.
               snVrrpIfRxAuthTypeErrCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.5 counter read-only
The received authentication type error counts in this interface.
               snVrrpIfRxAuthPwdMismatchErrCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.6 counter read-only
The received authentication password mismatched error counts in this interface.
               snVrrpIfRxVridErrCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.7 counter read-only
The received unfound VRID error counts in this interface.
   snVrrpVirRtr 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3
       snVrrpVirRtrTable 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1 no-access
The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP.
           snVrrpVirRtrEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1 no-access
The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP.
               snVrrpVirRtrPort 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.1 integer read-only
The IP port of this VRRP interface.
               snVrrpVirRtrId 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.2 integer read-only
One of the virtual router ID of this VRRP interface.
               snVrrpVirRtrOwnership 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.3 integer read-write
The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this VRRP router interface. Enumeration: 'owner': 1, 'backup': 2, 'incomplete': 0.
               snVrrpVirRtrCfgPriority 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.4 integer read-write
The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVrrpVirRtrOwnership is set to backup(2).
               snVrrpVirRtrTrackPriority 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.5 integer read-write
The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN.
               snVrrpVirRtrCurrPriority 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.6 integer read-only
The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN.
               snVrrpVirRtrHelloInt 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.7 integer read-write
Time interval between advertisements (seconds).
               snVrrpVirRtrDeadInt 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.8 integer read-write
Dead interval (seconds).
               snVrrpVirRtrPreemptMode 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.9 integer read-write
This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption. Enumeration: 'disabled': 0, 'enabled': 1.
               snVrrpVirRtrState 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.10 integer read-only
This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. Enumeration: 'backup': 2, 'init': 0, 'master': 1.
               snVrrpVirRtrActivate 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.11 integer read-write
This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate this VRRP Router. Enumeration: 'disabled': 0, 'enabled': 1.
               snVrrpVirRtrIpAddrMask 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.12 octet string read-write
The numbers of IP Addresses of this virtual router of this interface.
               snVrrpVirRtrTrackPortMask 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13 octet string read-write
This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership. The size of the OCTET STRING for Chassis is 32. The size of the OCTET STRING for Stackable is 4.
               snVrrpVirRtrTrackVifMask 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.14 octet string read-write
This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership The size of the OCTET STRING for Chassis is 8. The size of the OCTET STRING for Stackable is 4.
               snVrrpVirRtrRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.15 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an existing row VirRtr the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
               snVrrpVirRtrRxArpPktDropCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.16 counter read-only
The received VRRP ARP Packet Drop Counts.
               snVrrpVirRtrRxIpPktDropCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.17 counter read-only
The received VRRP IP Packet Drop Counts.
               snVrrpVirRtrRxPortMismatchCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.18 counter read-only
The received VRRP Port mismatching Counts.
               snVrrpVirRtrRxNumOfIpMismatchCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.19 counter read-only
The received VRRP Number of IP Addresses mismatching Counts.
               snVrrpVirRtrRxIpMismatchCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.20 counter read-only
The received VRRP IP Address mismatching Counts.
               snVrrpVirRtrRxHelloIntMismatchCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.21 counter read-only
The counts of the virtual router interface with hello interval mismatch counts.
               snVrrpVirRtrRxPriorityZeroFromMasterCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.22 counter read-only
The counts of the virtual router interface with Priority zero from the master.
               snVrrpVirRtrRxHigherPriorityCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.23 counter read-only
The counts of the virtual router interface with higher Priority.
               snVrrpVirRtrTransToMasterStateCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.24 counter read-only
The counts of the virtual router interface transition to master state.
               snVrrpVirRtrTransToBackupStateCnts 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.25 counter read-only
The counts of the virtual router interface transition to backup state.
               snVrrpVirRtrCurrDeadInt 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.26 integer read-only
Current Dead interval (in 100 milliseconds).
   snLoopbackIntfConfigTable 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1 no-access
Loopback Interface Config table.
       snLoopbackIntfConfigEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1 no-access
An entry in the Loopback Interface Config table.
           snLoopbackIntfConfigPortIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.1 integer read-only
The port index for Loopback Interface config entry.
           snLoopbackIntfMode 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.2 integer read-write
The Loopback Interface mode. Enumeration: 'disabled': 0, 'enabled': 1.
           snLoopbackIntfRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.3 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.