HP-SN-BGP4-GROUP-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HP-SN-BGP4-GROUP-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 snBgp4Gen 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1
     snBgp4GenAlwaysCompareMed 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.1 integer read-write
To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS. Enumeration: 'disabled': 0, 'enabled': 1.
     snBgp4GenAutoSummary 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.2 integer read-write
To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes. Enumeration: 'disabled': 0, 'enabled': 1.
     snBgp4GenDefaultLocalPreference 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.3 integer read-write
To set the default local preference attribute.
     snBgp4GenDefaultInfoOriginate 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.4 integer read-write
To enable/disable the default Information Originate. Enumeration: 'disabled': 0, 'enabled': 1.
     snBgp4GenFastExternalFallover 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.5 integer read-write
To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down. Enumeration: 'disabled': 0, 'enabled': 1.
     snBgp4GenNextBootNeighbors 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.6 integer read-write
The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBgp4GenMaxNeighbors.
     snBgp4GenNextBootRoutes 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.7 integer read-write
The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is snBgp4GenMaxRoutes.
     snBgp4GenSynchronization 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.8 integer read-write
To enable/disable the synchronization between BGP and your IGP. Enumeration: 'disabled': 0, 'enabled': 1.
     snBgp4GenKeepAliveTime 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.9 integer read-write
The Keep alive timer.
     snBgp4GenHoldTime 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.10 integer read-write
The Hold time timer.
     snBgp4GenRouterId 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.11 ipaddress read-write
BGP Router Id.
     snBgp4GenTableMap 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.12 octet string read-write
An octet string of the route-map name, each character of the name is represented by one octet.
     snBgp4GenAdminStat 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.13 integer read-write
The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing on this router. Enumeration: 'disabled': 0, 'enabled': 1.
     snBgp4GenDefaultMetric 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.14 integer read-write
To set default metric values for the BGP4 protocol.
     snBgp4GenMaxNeighbors 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.15 integer read-only
The maximum number of neighbors can be configured in a BGP Peer Group.
     snBgp4GenMinNeighbors 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.16 integer read-only
The minimum number of neighbors can be configured in a BGP Peer Group.
     snBgp4GenMaxRoutes 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.17 integer read-only
The maximum configured number of Routes.
     snBgp4GenMinRoutes 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.18 integer read-only
The minimum configured number of Routes.
     snBgp4GenMaxAddrFilters 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.19 integer read-only
The maximum configured number of BGP4 address filters.
     snBgp4GenMaxAggregateAddresses 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.20 integer read-only
The maximum configured number of BGP4 aggregate addresses.
     snBgp4GenMaxAsPathFilters 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.21 integer read-only
The maximum configured number of BGP4 AS-PATH filters.
     snBgp4GenMaxCommunityFilters 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.22 integer read-only
The maximum configured number of BGP4 Community filters.
     snBgp4GenMaxNetworks 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.23 integer read-only
The maximum configured number of BGP4 Networks.
     snBgp4GenMaxRouteMapFilters 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.24 integer read-only
The maximum configured number of BGP4 Route-map Filters.
     snBgp4GenNeighPrefixMinValue 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.25 integer read-only
The minimum configured value of BGP4 Neighbor Prefix.
     snBgp4GenOperNeighbors 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.26 integer read-only
The current operational max number of neighbors configured for a BGP Group.
     snBgp4GenOperRoutes 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.27 integer read-only
The current operational number of Routes.
     snBgp4GenLocalAs 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.28 integer read-write
Bgp4 local autonomous system number.
     snBgp4GenRoutesInstalled 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.29 integer read-only
Bgp4 installed routes.
     snBgp4GenAsPathInstalled 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.30 integer read-only
Bgp4 installed autonomous system path.
     snBgp4ExternalDistance 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.31 integer read-write
Administrative distance for BGP external routes.
     snBgp4InternalDistance 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.32 integer read-write
Administrative distance for BGP internal routes.
     snBgp4LocalDistance 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.33 integer read-write
Administrative distance for BGP local routes.
     snBgp4OperNumOfAttributes 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.34 integer read-only
The operational number of attribute entries.
     snBgp4NextBootMaxAttributes 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.35 integer read-write
The next boot maximum attribute entries. 10000 means reset to default.
     snBgp4ClusterId 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.36 integer read-write
A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default.
     snBgp4ClientToClientReflection 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.37 integer read-write
To enable/disable the client to client reflection in BGP4. Enumeration: 'disabled': 0, 'enabled': 1.
     snBgp4GenTotalNeighbors 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.38 integer read-only
The current total number of neighbors running in a BGP Group.
     snBgp4GenMaxPaths 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.39 integer read-write
The maximum configured number of Paths.
     snBgp4GenConfedId 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.40 integer read-write
Bgp4 Confederation Id.
     snBgp4GenConfedPeers 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.41 octet string read-write
An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs.
 snBgp4AddrFilter 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2
     snBgp4AddrFilterTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1 no-access
Bgp4 Address Filter table.
         snBgp4AddrFilterEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1 no-access
An entry in the Bgp4 Address Filter table.
             snBgp4AddrFilterIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.1 integer read-only
The table index for a filter entry.
             snBgp4AddrFilterAction 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.2 integer read-write
Action to take if the bgp address match with this filter. Enumeration: 'deny': 0, 'permit': 1.
             snBgp4AddrFilterSourceIp 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.3 ipaddress read-write
Source IP address.
             snBgp4AddrFilterSourceMask 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.4 ipaddress read-write
Source IP subnet mask.
             snBgp4AddrFilterDestIp 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.5 ipaddress read-write
Destination IP address.
             snBgp4AddrFilterDestMask 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.6 ipaddress read-write
Destination IP subnet mask.
             snBgp4AddrFilterRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.7 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
 snBgp4AggregateAddr 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3
     snBgp4AggregateAddrTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1 no-access
Bgp4 Aggregate Address table.
         snBgp4AggregateAddrEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1 no-access
An entry in the Bgp4 Aggregate Address table.
             snBgp4AggregateAddrIp 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.1 ipaddress read-only
Aggregate Address IP address.
             snBgp4AggregateAddrMask 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.2 ipaddress read-only
Aggregate Address IP subnet mask.
             snBgp4AggregateAddrOption 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.3 integer read-only
address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table. Enumeration: 'advertiseMap': 5, 'attributeMap': 6, 'summaryOnly': 3, 'address': 1, 'suppressMap': 4, 'asSet': 2.
             snBgp4AggregateAddrMap 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.4 octet string read-write
This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only two Options for creating an aggregate address map. A SNMP-SET error will be returned for other options. An octet string of the map name, each character of the name is represented by one octet.
             snBgp4AggregateAddrRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.5 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
 snBgp4AsPathFilter 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4
     snBgp4AsPathFilterTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1 no-access
Bgp4 AS-Path Filter table.
         snBgp4AsPathFilterEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1 no-access
An entry in the Bgp4 As-path Filter table.
             snBgp4AsPathFilterIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.1 integer read-only
The table index for a filter entry.
             snBgp4AsPathFilterAction 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.2 integer read-write
Action to take if the bgp address match with this filter. Enumeration: 'deny': 0, 'permit': 1.
             snBgp4AsPathFilterRegExpression 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.3 octet string read-write
Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet.
             snBgp4AsPathFilterRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.4 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
 snBgp4CommunityFilter 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5
     snBgp4CommunityFilterTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1 no-access
Bgp4 Community Filter table.
         snBgp4CommunityFilterEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1 no-access
An entry in the Bgp4 Community Filter table.
             snBgp4CommunityFilterIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.1 integer read-only
The table index for a filter entry.
             snBgp4CommunityFilterAction 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.2 integer read-write
Action to take if the bgp address match with this filter. Enumeration: 'deny': 0, 'permit': 1.
             snBgp4CommunityFilterCommNum 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.3 octet string read-write
A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs.
             snBgp4CommunityFilterInternet 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.4 integer read-write
Disabled/Enabled the Internet Community. Enumeration: 'disabled': 0, 'enabled': 1.
             snBgp4CommunityFilterNoAdvertise 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.5 integer read-write
Do not advertise this route to any peer (internal or external). Enumeration: 'true': 1, 'false': 0.
             snBgp4CommunityFilterNoExport 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.6 integer read-write
Do not advertise this route to an EBGP peer. Enumeration: 'true': 1, 'false': 0.
             snBgp4CommunityFilterRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.7 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
             snBgp4CommunityFilterLocalAs 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.8 integer read-write
Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. Enumeration: 'true': 1, 'false': 0.
 snBgp4NeighGenCfg 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6
     snBgp4NeighGenCfgTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1 no-access
Bgp4 Neighbor General Configuration table.
         snBgp4NeighGenCfgEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1 no-access
An entry in the Bgp4 Community Filter table.
             snBgp4NeighGenCfgNeighIp 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.1 ipaddress read-only
The IP Address for a neighbor entry.
             snBgp4NeighGenCfgAdvertlevel 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.2 integer read-write
To set the minimum interval between the sending of BGP routing updates.
             snBgp4NeighGenCfgDefOriginate 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.3 integer read-write
To enable/disable the default originate for this neighbor. Enumeration: 'disabled': 0, 'enabled': 1.
             snBgp4NeighGenCfgEbgpMultihop 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.4 integer read-write
To enable/disable the EBGP Muitihop for this neighbor. Enumeration: 'disabled': 0, 'enabled': 1.
             snBgp4NeighGenCfgMaxPrefix 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.5 integer read-write
To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the maximum prefix is snBgp4GenOperRoutes.
             snBgp4NeighGenCfgNextHopSelf 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.6 integer read-write
To enable/disable the next-hop processing of BGP updates on the router. Enumeration: 'disabled': 0, 'enabled': 1.
             snBgp4NeighGenCfgRemoteAs 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.7 integer read-write
To specify a neighbor with an autonomous system number(AS).
             snBgp4NeighGenCfgSendComm 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.8 integer read-write
To specify that a COMMUNITES attribute should be sent to a BGP neighbor. Enumeration: 'disabled': 0, 'enabled': 1.
             snBgp4NeighGenCfgWeight 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.9 integer read-write
To assign a weight to a neighbor connection.
             snBgp4NeighGenCfgWeightFilterList 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.10 octet string read-write
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
             snBgp4NeighGenCfgRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.11 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row applyDefault(6)...apply default value to an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'modify': 5, 'invalid': 1, 'valid': 2, 'delete': 3, 'applyDefault': 6.
             snBgp4NeighGenCfgUpdateSrcLpbIntf 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.12 integer read-write
To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment to the closest interface, which is called the best local address.
             snBgp4NeighGenCfgRouteRefClient 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.13 integer read-write
To configure the router as a BGP route reflector, enable the specified neighbor as its client. When all the clients are disabled, the local router is no longer a route reflector. Enumeration: 'disabled': 0, 'enabled': 1.
             snBgp4NeighGenCfgRemovePrivateAs 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.14 integer read-write
To enable/disable filtering private AS number. Enumeration: 'disabled': 0, 'enabled': 1.
             snBgp4NeighGenCfgEbgpMultihopTtl 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.15 integer read-write
The EBGP Muitihop TTL for this neighbor.
             snBgp4NeighGenCfgShutdown 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.16 integer read-write
To enable/disable BGP4 Nbr Shutdown. Enumeration: 'disabled': 0, 'enabled': 1.
             snBgp4NeighGenCfgKeepAliveTime 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.17 integer read-write
The Keep alive timer.
             snBgp4NeighGenCfgHoldTime 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.18 integer read-write
The Hold time timer.
 snBgp4NeighDistGroup 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7
     snBgp4NeighDistGroupTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1 no-access
Bgp4 Neighbor Distribute Group table.
         snBgp4NeighDistGroupEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1 no-access
An entry in the Bgp4 Distribute Group table.
             snBgp4NeighDistGroupNeighIp 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.1 ipaddress read-only
The IP Address for a neighbor entry.
             snBgp4NeighDistGroupDir 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.2 integer read-only
The incoming/outgoing advertisements to which the access list is applied. Enumeration: 'in': 1, 'out': 0.
             snBgp4NeighDistGroupAccessList 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.3 octet string read-write
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
             snBgp4NeighDistGroupRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.4 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
 snBgp4NeighFilterGroup 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8
     snBgp4NeighFilterGroupTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1 no-access
Bgp4 Neighbor Filter Group table.
         snBgp4NeighFilterGroupEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1 no-access
An entry in the Bgp4 Neighbor Filter Group table.
             snBgp4NeighFilterGroupNeighIp 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.1 ipaddress read-only
The IP Address for a neighbor entry.
             snBgp4NeighFilterGroupDir 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.2 integer read-only
The incoming/outgoing advertisements to which the access list is applied. Enumeration: 'in': 1, 'out': 0.
             snBgp4NeighFilterGroupAccessList 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.3 octet string read-write
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
             snBgp4NeighFilterGroupRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.4 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
 snBgp4NeighRouteMap 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9
     snBgp4NeighRouteMapTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1 no-access
Bgp4 Neighbor Route Map table.
         snBgp4NeighRouteMapEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1 no-access
An entry in the Bgp4 Route Map table.
             snBgp4NeighRouteMapNeighIp 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.1 ipaddress read-only
The IP Address for a neighbor entry.
             snBgp4NeighRouteMapDir 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.2 integer read-only
The incoming/outgoing advertisements to which the access list is applied. Enumeration: 'in': 1, 'out': 0.
             snBgp4NeighRouteMapMapName 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.3 octet string read-write
An octet string of the route-map name, Each character of the name is represented by one octet.
             snBgp4NeighRouteMapRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.4 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
 snBgp4Network 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10
       snBgp4NetworkTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1 no-access
Bgp4 Network Weight table.
           snBgp4NetworkEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1 no-access
An entry in the Bgp4 Network Weight table.
               snBgp4NetworkIp 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.1 ipaddress read-only
The IP Address for a network entry.
               snBgp4NetworkSubnetMask 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.2 ipaddress read-only
The subnet mask for a network entry.
               snBgp4NetworkWeight 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.3 integer read-write
To assign a weight to a neighbor connection.
               snBgp4NetworkBackdoor 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.4 integer read-write
To enable/disable the backdoor for this network. Enumeration: 'disabled': 0, 'enabled': 1.
               snBgp4NetworkRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.5 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
 snBgp4Redis 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11
       snBgp4RedisTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1 no-access
The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain.
           snBgp4RedisEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1 no-access
The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain.
               snBgp4RedisProtocol 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.1 integer read-only
The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the connected. Enumeration: 'static': 3, 'connected': 4, 'ospf': 2, 'rip': 1.
               snBgp4RedisMetric 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.2 integer read-write
The metric of using the specified protocol Metric value.
               snBgp4RedisRouteMap 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.3 octet string read-write
An octet string of the route-map name, each character of the name is represented by one octet.
               snBgp4RedisWeight 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.4 integer read-write
To assign a weight for the specified protocol.
               snBgp4RedisMatchInternal 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.5 integer read-write
This object is only applicable to the OSPF protocol. Enumeration: 'disabled': 0, 'enabled': 1.
               snBgp4RedisMatchExternal1 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.6 integer read-write
This object is only applicable to the OSPF protocol. Enumeration: 'disabled': 0, 'enabled': 1.
               snBgp4RedisMatchExternal2 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.7 integer read-write
This object is only applicable to the OSPF protocol. Enumeration: 'disabled': 0, 'enabled': 1.
               snBgp4RedisRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.8 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
 snBgp4RouteMapFilter 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12
       snBgp4RouteMapFilterTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1 no-access
Bgp4 RouteMap Filter table.
           snBgp4RouteMapFilterEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1 no-access
An entry in the Bgp4 RouteMap Filter table.
               snBgp4RouteMapFilterMapName 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.1 octet string read-only
An octet string of the route-map name, each character of the name is represented by one octet.
               snBgp4RouteMapFilterSequenceNum 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.2 integer read-only
A sequence number for this particular route-map.
               snBgp4RouteMapFilterAction 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.3 integer read-write
Action to take if the bgp address match with this filter. Enumeration: 'deny': 0, 'permit': 1.
               snBgp4RouteMapFilterRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.4 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
 snBgp4RouteMapMatch 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13
       snBgp4RouteMapMatchTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1 no-access
Bgp4 Route Map Set table.
           snBgp4RouteMapMatchEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1 no-access
An entry in the Bgp4 Route Map Match table.
               snBgp4RouteMapMatchMapName 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.1 octet string read-only
An octet string of the route-map name, each character of the name is represented by one octet.
               snBgp4RouteMapMatchSequenceNum 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.2 integer read-only
A sequence number for this particular route-map.
               snBgp4RouteMapMatchAsPathFilter 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.3 octet string read-write
A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list.
               snBgp4RouteMapMatchCommunityFilter 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.4 octet string read-write
A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list.
               snBgp4RouteMapMatchAddressFilter 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.5 octet string read-write
A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list.
               snBgp4RouteMapMatchMetric 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.6 integer read-write
To match a metric for BGP routes.
               snBgp4RouteMapMatchNextHopList 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.7 octet string read-write
A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list.
               snBgp4RouteMapMatchRouteType 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.8 integer read-write
To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET. Enumeration: 'none': 0, 'externalType2': 3, 'externalType1': 2, 'external': 1, 'local': 5, 'internal': 4.
               snBgp4RouteMapMatchTagList 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.9 octet string read-write
To match a BGP tag access list.
               snBgp4RouteMapMatchRowMask 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.10 integer read-write
This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset
 snBgp4RouteMapSet 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14
       snBgp4RouteMapSetTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1 no-access
Bgp4 Route Map Set table.
           snBgp4RouteMapSetEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1 no-access
An entry in the Bgp4 Route Map Set table.
               snBgp4RouteMapSetMapName 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.1 octet string read-only
An octet string of the route-map name, each character of the name is represented by one octet.
               snBgp4RouteMapSetSequenceNum 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.2 integer read-only
A sequence number for this particular route-map.
               snBgp4RouteMapSetAsPathType 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.3 integer read-write
To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the as-path of the route that is matched by the route map. Enumeration: 'tag': 0, 'prepend': 1.
               snBgp4RouteMapSetAsPathString 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.4 octet string read-write
as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1).
               snBgp4RouteMapSetAutoTag 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.5 integer read-write
To enable/disable the automatic-tag for BGP routes. Enumeration: 'disabled': 0, 'enabled': 1.
               snBgp4RouteMapSetCommunityType 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.6 integer read-write
To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 are not valid since 5.03.00 Enumeration: 'none': 3, 'nums': 0.
               snBgp4RouteMapSetCommunityNum 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.7 integer read-write
community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd was sent together with the value set to number(0).
               snBgp4RouteMapSetCommunityAdditive 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.8 integer read-write
To add the community to the already existing communities. Enumeration: 'disabled': 0, 'enabled': 1.
               snBgp4RouteMapSetLocalPreference 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.9 integer read-write
To modify a local-preference for BGP routes.
               snBgp4RouteMapSetMetric 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.10 integer read-write
To modify a metric for BGP routes.
               snBgp4RouteMapSetNextHop 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.11 ipaddress read-write
To modify the IP address of the next hop for BGP routes.
               snBgp4RouteMapSetOrigin 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.12 integer read-write
To set the BGP origin code. Enumeration: 'egp': 1, 'incomplete': 2, 'igp': 0.
               snBgp4RouteMapSetTag 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.13 integer read-write
To specify the tag for BGP routes.
               snBgp4RouteMapSetWeight 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.14 integer read-write
To specify the BGP weight for the routing table.
               snBgp4RouteMapSetRowMask 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.15 integer read-write
This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset
               snBgp4RouteMapSetCommunityNums 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.16 octet string read-write
Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs.
 snBgp4NeighOperStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15
       snBgp4NeighOperStatusTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1 no-access
Bgp4 Neighbor Operational Status table.
           snBgp4NeighOperStatusEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1 no-access
An entry in the Bgp4 Operational Status table.
               snBgp4NeighOperStatusIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.1 integer read-only
The index for a neighbor entry.
               snBgp4NeighOperStatusIp 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.2 ipaddress read-only
The IP Address for a neighbor entry.
               snBgp4NeighOperStatusRemoteAs 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.3 integer read-only
To show a neighbor with an autonomous system number(AS).
               snBgp4NeighOperStatusBgpType 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.4 integer read-only
To show the type of BGP protocol whether is internal or external. Enumeration: 'ibgp': 1, 'ebgp': 0.
               snBgp4NeighOperStatusState 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.5 integer read-only
To show the state of this neighbor. Enumeration: 'established': 6, 'openConfirm': 5, 'noState': 0, 'openSent': 4, 'idle': 1, 'connect': 2, 'active': 3.
               snBgp4NeighOperStatusKeepAliveTime 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.6 integer read-only
The Keep alive timer.
               snBgp4NeighOperStatusHoldTime 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.7 integer read-only
The Hold time timer.
               snBgp4NeighOperStatusAdvertlevel 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.8 integer read-only
To show the minimum interval between the sending of BGP routing updates.
               snBgp4NeighOperStatusKeepAliveTxCounts 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.9 counter read-only
Keep alive message sent counts.
               snBgp4NeighOperStatusKeepAliveRxCounts 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.10 counter read-only
Keep alive message received counts.
               snBgp4NeighOperStatusUpdateTxCounts 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.11 counter read-only
Update message sent counts.
               snBgp4NeighOperStatusUpdateRxCounts 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.12 counter read-only
Update message received counts.
               snBgp4NeighOperStatusNotifTxCounts 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.13 counter read-only
Notification message sent counts.
               snBgp4NeighOperStatusNotifRxCounts 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.14 counter read-only
Notification message received counts.
               snBgp4NeighOperStatusOpenTxCounts 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.15 counter read-only
Open message sent counts.
               snBgp4NeighOperStatusOpenRxCounts 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.16 counter read-only
Open message received counts.
 snBgp4RouteOperStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16
       snBgp4RouteOperStatusTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1 no-access
Bgp4 Routebor Operational Status table.
           snBgp4RouteOperStatusEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1 no-access
An entry in the Bgp4 Operational Status table.
               snBgp4RouteOperStatusIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.1 integer read-only
The index for a route entry.
               snBgp4RouteOperStatusIp 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.2 ipaddress read-only
The IP Address for a route entry.
               snBgp4RouteOperStatusSubnetMask 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.3 ipaddress read-only
The IP Subnet Mask for a route entry.
               snBgp4RouteOperStatusNextHop 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.4 ipaddress read-only
The next-hop IP for a route entry.
               snBgp4RouteOperStatusMetric 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.5 integer read-only
To show the metric value of a route entry.
               snBgp4RouteOperStatusLocalPreference 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.6 integer read-only
To show the local preference of a route entry.
               snBgp4RouteOperStatusWeight 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.7 integer read-only
To show the weight of this route.
               snBgp4RouteOperStatusOrigin 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.8 integer read-only
To show the origin of this route. Enumeration: 'egp': 1, 'incomplete': 2, 'igp': 0.
               snBgp4RouteOperStatusStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.9 integer read-only
A bit array that contains the status of this route. This is a packed bit string; The following shows the meaning of each bit: (bit 0 is the least significant bit and 0=FALSE, 1=TRUE). bit position meaning ------------ ------- 6-31 reserved. 5 aggregate. 4 best. 3 internal. 2 local. 1 suppressed. 0 valid.
               snBgp4RouteOperStatusRouteTag 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.10 integer read-only
To show the route tag of this route.
               snBgp4RouteOperStatusCommunityList 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.11 octet string read-only
To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02
               snBgp4RouteOperStatusAsPathList 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.12 octet string read-only
To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs.
 snBgp4NeighborSummary 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17
       snBgp4NeighborSummaryTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1 no-access
Bgp4 Routebor Operational Status table.
           snBgp4NeighborSummaryEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1 no-access
An entry in the Bgp4 Operational Status table.
               snBgp4NeighborSummaryIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.1 integer read-only
The index for a route entry.
               snBgp4NeighborSummaryIp 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.2 ipaddress read-only
The IP Address for a route entry.
               snBgp4NeighborSummaryState 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.3 integer read-only
To show the state of this neighbor. Enumeration: 'established': 6, 'openConfirm': 5, 'noState': 0, 'openSent': 4, 'idle': 1, 'connect': 2, 'active': 3.
               snBgp4NeighborSummaryStateChgTime 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.4 integer read-only
The time of a change of the state of this neighbor.
               snBgp4NeighborSummaryRouteReceived 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.5 integer read-only
The number of routes received of this neighbor.
               snBgp4NeighborSummaryRouteInstalled 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.6 integer read-only
The number of routes installed of this neighbor.
 snBgp4Attribute 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18
       snBgp4AttributeTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1 no-access
Bgp4 Attribute entries table.
           snBgp4AttributeEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1 no-access
An entry in the Bgp4 Attribute table.
               snBgp4AttributeIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.1 integer read-only
The index for a route entry.
               snBgp4AttributeNextHop 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.2 ipaddress read-only
The next-hop IP for a route entry.
               snBgp4AttributeMetric 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.3 integer read-only
To show the metric value of a route entry.
               snBgp4AttributeOrigin 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.4 integer read-only
To show the origin of this route. Enumeration: 'egp': 1, 'incomplete': 2, 'igp': 0.
               snBgp4AttributeAggregatorAs 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.5 integer read-only
The aggregator AS number for an attribute entry.
               snBgp4AttributeRouterId 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.6 ipaddress read-only
The router ID for an attribute entry.
               snBgp4AttributeAtomicAggregatePresent 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.7 integer read-only
The atomic aggregate present in an attribute entry. Enumeration: 'true': 1, 'false': 0.
               snBgp4AttributeLocalPreference 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.8 integer read-only
To show the local preference of a route entry.
               snBgp4AttributeCommunityList 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.9 octet string read-only
To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02
               snBgp4AttributeAsPathList 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.10 octet string read-only
To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs.
               snBgp4AttributeOriginator 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.11 ipaddress read-only
The originator IP address for an attribute entry.
               snBgp4AttributeClusterList 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.12 octet string read-only
To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID which is represented by 4 OCTETs IP address.
 snBgp4ClearNeighborCmd 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19
       snBgp4ClearNeighborCmdTable 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1 no-access
Clear Bgp4 command table.
           snBgp4ClearNeighborCmdEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1 no-access
An entry in the clear Bgp4 neighbor command table.
               snBgp4ClearNeighborCmdIp 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1.1 ipaddress read-only
The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors.
               snBgp4ClearNeighborCmdElement 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1.2 integer read-write
To send the command element of this neighbor for value(1) to (5) valid(0) is received in SNMP-get. Enumeration: 'lastPacketWithError': 1, 'valid': 0, 'traffic': 4, 'neighbor': 5, 'softOutbound': 3, 'notificationErrors': 2.