HP-ICF-JOB-SCHEDULER-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HP-ICF-JOB-SCHEDULER-MIB
Download as:   
HP-ICF-OID, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpicfJobSchedulerMIB 1.3.6.1.4.1.11.2.14.11.5.1.105
This MIB module contains HP proprietary objects used to configure Job Scheduling.
         hpicfJobSchedulerObjects 1.3.6.1.4.1.11.2.14.11.5.1.105.1
             hpicfJobSchedulerTable 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1 no-access
This table defines a set of jobs which run as per the schedule or when a particular event occurs.
                 hpicfJobSchedulerEntry 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1 no-access
An entry in the table which provides information about a scheduled job.
                     hpicfJobSchedulerName 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.1 displaystring no-access
A unique name for a scheduled job.
                     hpicfJobSchedulerRowStatus 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.2 rowstatus read-only
The Row Status of this entry. To create a new entry, send an SNMP SET request with a RowStatus of 'createAndGo'. active - the job is ready to run as scheduled. notInService - not valid for this table. notReady - the job is not fully configured. createAndGo - create a new entry. createAndWait - not valid for this table. delete - delete the entry.
                     hpicfJobSchedulerCommand 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.3 octet string read-write
The CLI command to execute when the job is run.
                     hpicfJobSchedulerConfigSave 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.4 truthvalue read-write
This flag causes any configuration changes made by the job to be saved at completion.
                     hpicfJobSchedulerRunCount 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.5 unsigned32 read-only
The number of times since the device booted that the job has run.
                     hpicfJobSchedulerErrorCount 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.6 unsigned32 read-only
The number of times since the device booted that the job has resulted in an error.
                     hpicfJobSchedulerLastOutput 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.7 octet string read-only
The first 255 characters of output from the last job execution.
                     hpicfJobSchedulerEvent 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.8 bits read-write
A set of events that will cause this job to run. reboot - the job is run as soon as possible after the device boots. failover - the job is executed after failover to a standby management module. This event only applies to devices that have a standby module and is ignored on other devices. The Calendar schedule objects below are ignored when any event bit is set in this object. Bits: 'failover': 1, 'reboot': 0.
                     hpicfJobSchedulerCalendarMonth 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.9 bits read-write
The set of months when this job should run. Some devices may allow only a single month to be specified in the bitmap. Bits: 'february': 1, 'october': 9, 'march': 2, 'august': 7, 'september': 8, 'may': 4, 'january': 0, 'june': 5, 'april': 3, 'december': 11, 'july': 6, 'november': 10.
                     hpicfJobSchedulerCalendarDayOfMonth 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.10 bits read-write
The set of days of the month when this job should run. Bits beginning with 'd' specify a day relative to the first day of the month. Bits beginning with 'r' specify a day relative to the last day of the month. Bit 'r1' is the last day of the month, bit 'r2' is the second to last day of the month, etc. Some devices may allow only a single day to be specified in the bitmap. Bits: 'r29': 59, 'r17': 47, 'r8': 38, 'r28': 58, 'r9': 39, 'r27': 57, 'd8': 7, 'd9': 8, 'd6': 5, 'd7': 6, 'd4': 3, 'd5': 4, 'd2': 1, 'd3': 2, 'r21': 51, 'd1': 0, 'd14': 13, 'd15': 14, 'd16': 15, 'd17': 16, 'd10': 9, 'd11': 10, 'd12': 11, 'd13': 12, 'r23': 53, 'r11': 41, 'd18': 17, 'd19': 18, 'd30': 29, 'd31': 30, 'r22': 52, 'r20': 50, 'r16': 46, 'r4': 34, 'r14': 44, 'r15': 45, 'r12': 42, 'r13': 43, 'r10': 40, 'r5': 35, 'r31': 61, 'r18': 48, 'r19': 49, 'r30': 60, 'r26': 56, 'r25': 55, 'd29': 28, 'd28': 27, 'r6': 36, 'r7': 37, 'r1': 31, 'r2': 32, 'r3': 33, 'd21': 20, 'd20': 19, 'd23': 22, 'd22': 21, 'd25': 24, 'd24': 23, 'd27': 26, 'd26': 25, 'r24': 54.
                     hpicfJobSchedulerCalendarDayOfWeek 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.11 bits read-write
The days of the week when the job is scheduled to run. The Month and DayOfMonth objects above are ignored when any bit is set in this object. Bits: 'monday': 1, 'tuesday': 2, 'friday': 5, 'wednesday': 3, 'thursday': 4, 'sunday': 0, 'saturday': 6.
                     hpicfJobSchedulerCalendarHour 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.12 bits read-write
A bitmap of hours of the day when the job is scheduled to run. Times are local. Some devices may allow only a single hour to be specified in the bitmap. Bits: 'h8': 8, 'h9': 9, 'h2': 2, 'h3': 3, 'h0': 0, 'h1': 1, 'h6': 6, 'h7': 7, 'h4': 4, 'h5': 5, 'h21': 21, 'h20': 20, 'h23': 23, 'h22': 22, 'h18': 18, 'h19': 19, 'h10': 10, 'h11': 11, 'h12': 12, 'h13': 13, 'h14': 14, 'h15': 15, 'h16': 16, 'h17': 17.
                     hpicfJobSchedulerCalendarMinute 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.13 bits read-write
A bitmap of minutes of the hour when the job is scheduled to run. Times are local. This value is combined with the Hour bitmap to create a set of times for the job to run on each scheduled day. Some devices may allow only a single minute to be specified in the bitmap. Bits: 'm41': 41, 'm46': 46, 'm47': 47, 'm11': 11, 'm10': 10, 'm13': 13, 'm12': 12, 'm15': 15, 'm14': 14, 'm17': 17, 'm16': 16, 'm19': 19, 'm18': 18, 'm45': 45, 'm44': 44, 'm55': 55, 'm54': 54, 'm57': 57, 'm56': 56, 'm51': 51, 'm50': 50, 'm39': 39, 'm38': 38, 'm37': 37, 'm36': 36, 'm35': 35, 'm34': 34, 'm33': 33, 'm32': 32, 'm31': 31, 'm30': 30, 'm5': 5, 'm4': 4, 'm7': 7, 'm6': 6, 'm1': 1, 'm0': 0, 'm3': 3, 'm2': 2, 'm52': 52, 'm53': 53, 'm9': 9, 'm8': 8, 'm58': 58, 'm59': 59, 'm48': 48, 'm49': 49, 'm28': 28, 'm29': 29, 'm24': 24, 'm25': 25, 'm26': 26, 'm27': 27, 'm20': 20, 'm21': 21, 'm22': 22, 'm23': 23, 'm42': 42, 'm43': 43, 'm40': 40.
                     hpicfJobSchedulerDelay 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.14 unsigned32 read-write
The delay in minutes before running the job. For recurring jobs, this value is the delay before running the job again.
                     hpicfJobSchedulerCount 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.15 unsigned32 read-write
The object is set to determine the number of times this job would run. The object value is set 0 if the job has no expiration count.
                     hpicfJobSchedulerStatus 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.16 truthvalue read-write
Indicates whether the job is enabled or disabled. The object has value true(1) if job status is enabled; otherwise the object has value false(2) if job is disabled.
                     hpicfJobSchedulerRunningStatus 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.17 integer read-only
Indicates whether the job running status is Active, Inactive or Expired. If the job is running, the status becomes Active. If the count has Expired, the status becomes Expired and if the job is Disabled, the running status becomes Inactive. Enumeration: 'active': 1, 'inactive': 2, 'expired': 3.
                     hpicfJobSchedulerLastRunTime 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.18 dateandtime read-only
Indicates the Last Run date and time of the scheduled job.When job has not run even for once, it will show value as 0.
                     hpicfJobSchedulerSkipCount 1.3.6.1.4.1.11.2.14.11.5.1.105.1.1.1.19 unsigned32 read-only
This object indicates the number of times this job is skipped for execution. If no job is skipped, the value of this object is set to 0.
         hpicfJobSchedulerConformance 1.3.6.1.4.1.11.2.14.11.5.1.105.2
             hpicfJobSchedulerMIBCompliances 1.3.6.1.4.1.11.2.14.11.5.1.105.2.1
                 hpicfJobSchedulerMIBCompliance 1.3.6.1.4.1.11.2.14.11.5.1.105.2.1.1
The compliance statement for device support of HP-ICF-JOB-SCHEDULER-MIB.
                 hpicfJobSchedulerMIBCompliance1 1.3.6.1.4.1.11.2.14.11.5.1.105.2.1.2
The compliance statement for device support of HP-ICF-JOB-SCHEDULER-MIB.
                 hpicfJobSchedulerMIBCompliance2 1.3.6.1.4.1.11.2.14.11.5.1.105.2.1.3
The compliance statement for device support of HP-ICF-JOB-SCHEDULER-MIB.
                 hpicfJobSchedulerMIBCompliance3 1.3.6.1.4.1.11.2.14.11.5.1.105.2.1.4
The compliance statement for device support of HP-ICF-JOB-SCHEDULER-MIB.
             hpicfJobSchedulerMIBGroups 1.3.6.1.4.1.11.2.14.11.5.1.105.2.2
                 hpicfJobSchedulerGroup 1.3.6.1.4.1.11.2.14.11.5.1.105.2.2.1
A collection of objects providing configuration of scheduled jobs.
                 hpicfJobSchedulerGroup1 1.3.6.1.4.1.11.2.14.11.5.1.105.2.2.2
A collection of objects providing configuration of scheduled jobs.
                 hpicfJobSchedulerGroup2 1.3.6.1.4.1.11.2.14.11.5.1.105.2.2.3
A collection of objects providing configuration of scheduled jobs.
                 hpicfJobSchedulerGroup3 1.3.6.1.4.1.11.2.14.11.5.1.105.2.2.4
A collection of objects providing configuration of scheduled jobs.