HP-ICF-DHCPv6-SNOOP-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HP-ICF-DHCPv6-SNOOP-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpicfDSnoopV6 1.3.6.1.4.1.11.2.14.11.5.1.102
This MIB module contains HP proprietary objects for managing DHCPV6 Snooping.
         hpicfDSnoopV6Notifications 1.3.6.1.4.1.11.2.14.11.5.1.102.0
             hpicfDSnoopV6SourceBindingOutOfResources 1.3.6.1.4.1.11.2.14.11.5.1.102.0.1
This trap indicates that the number of bindings exceeded the maximum limit of 8192 bindings. This notification trap is controlled by the state of ' hpicfDSnoopV6OutOfResourcesTrapCtrl' object. Implementation of this trap is optional.
             hpicfDsnoopV6SourceBindingOutOfResourcesObjects 1.3.6.1.4.1.11.2.14.11.5.1.102.0.2
                 hpicfDsnoopV6SourceBindingPort 1.3.6.1.4.1.11.2.14.11.5.1.102.0.2.1 interfaceindex no-access
The port of failed binding entry. Maximum binding limit is reached.
                 hpicfDsnoopV6SourceBindingMacAddress 1.3.6.1.4.1.11.2.14.11.5.1.102.0.2.2 macaddress no-access
The MAC address of failed binding entry. Maximum binding limit is reached.
                 hpicfDsnoopV6SourceBindingIpAddressType 1.3.6.1.4.1.11.2.14.11.5.1.102.0.2.3 inetaddresstype no-access
The IPv6 address type of failed binding entry. Maximum binding limit is reached.
                 hpicfDsnoopV6SourceBindingIpAddress 1.3.6.1.4.1.11.2.14.11.5.1.102.0.2.4 inetaddress no-access
The IPv6 address of failed binding entry. Maximum binding limit is reached.
                 hpicfDsnoopV6SourceBindingVlan 1.3.6.1.4.1.11.2.14.11.5.1.102.0.2.5 vlanindex read-only
The VLAN of failed binding entry. Maximum binding limit is reached.
             hpicfDSnoopV6SourceBindingErrantReply 1.3.6.1.4.1.11.2.14.11.5.1.102.0.3
An hpicfDSnoopV6SourceBindingErrantReply notification signifies that the DHCPV6 snooping entity has detected and dropped an errant DHCPv6 reply packet. This notification trap is controlled by the state of 'hpicfDSnoopV6ErrantReplyTrapCtrl' object
             hpicfDSnoopV6SourceBindingNotifyObjects 1.3.6.1.4.1.11.2.14.11.5.1.102.0.4
                 hpicfDSnoopV6SourceBindingNotifyCount 1.3.6.1.4.1.11.2.14.11.5.1.102.0.4.1 counter32 no-access
A count of the DHCPV6 snooping notification sent from the DHCPv6 snooping entity to the SNMP entity. This count may be greater than the count of notifications actually transmitted by the SNMP entity due to rate limiting or configuration.
                 hpicfDSnoopV6SourceBindingErrantSrcMAC 1.3.6.1.4.1.11.2.14.11.5.1.102.0.4.2 macaddress no-access
The MAC address received in the errant DHCPv6 reply packet.
                 hpicfDSnoopV6SourceBindingErrantSrcIPType 1.3.6.1.4.1.11.2.14.11.5.1.102.0.4.3 inetaddresstype no-access
The type of address reported in hpicfDhcpSnoopSourceBindingErrantSrcIP.
                 hpicfDSnoopV6SourceBindingErrantSrcIP 1.3.6.1.4.1.11.2.14.11.5.1.102.0.4.4 inetaddress no-access
The IPv6 address received in the errant DHCPv6 reply packet.
         hpicfDSnoopV6Objects 1.3.6.1.4.1.11.2.14.11.5.1.102.1
             hpicfDSnoopV6Config 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1
                 hpicfDSnoopV6GlobalCfg 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1
                     hpicfDSnoopV6Enable 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.1 truthvalue read-write
This object provides the administrative status of the DHCPv6 Snooping feature. This status must be enabled for DHCPv6 snooping to work.
                     hpicfDSnoopV6VlanEnable 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.2 vidlist read-write
This object contains vid map for vlans on which DHCPV6 Snooping is enabled. A bit that is on (equal to 1) indicates that DHCPV6 snooping is enabled on corresponding vlan .
                     hpicfDSnoopV6DatabaseFile 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.3 snmpadminstring read-write
A location to store the lease database or to retrieve it after a reboot. The location must be given in the form of a Uniform Resource Locator (URL) as defined in RFC 2396. The permissible character sets and the encoding rules defined in RFC 2396 section 2 apply.
                     hpicfDSnoopV6DatabaseWriteDelay 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.4 unsigned32 read-write
The number of seconds to delay writing the DHCPv6 lease database file after a database change. This allows grouping multiple database changes into a single write. The default value is 300 seconds.
                     hpicfDSnoopV6DatabaseWriteTimeout 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.5 unsigned32 read-write
The number of seconds to wait for the database file transfer to finish. If file transfer is not over within this period, a file transfer failure message is displayed. To continue trying indefinitely, specify a value of 0. The default value is 300 seconds.
                     hpicfDSnoopV6OutOfResourcesTrapCtrl 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.6 integer read-write
This object provides the operational status of DSNOOPv6 out of resource control trap. The default value is enabled. This notification trap is sent when the number of bindings exceed the maximum limit of 8192 bindings. Configuration of this object requires SNMPv3 authentication. Enumeration: 'disabled': 2, 'enabled': 1.
                     hpicfDSnoopV6ErrantReplyTrapCtrl 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.7 integer read-write
This object provides the operational status of DSNOOPv6 errant repy control trap. The default value is enabled. This notification trap is sent when a DHCPv6 reply packet is received on an untrusted port or from an un-authorized server. Configuration of this object requires SNMPv3 authentication. Enumeration: 'disabled': 2, 'enabled': 1.
                     hpicfDSnoopV6DatabaseFTPort 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.8 unsigned32 read-write
A location to store the port value of the FT Server. The default port value will be 69 for TFTP and 22 for SFTP.
                     hpicfDSnoopV6DatabaseSFTPUsername 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.9 snmpadminstring read-write
A location to store the Username of the SFTP Server. The default value of username is root.
                     hpicfDSnoopV6DatabaseSFTPPassword 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.10 snmpadminstring read-write
A location to store the Password of the SFTP Server.
                     hpicfDSnoopV6DatabaseValidateSFTPServer 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.1.11 integer read-write
This object sets the validate-sftp-server flag. When enabled, the user must login to the SFTP server to verify and accept the public key of the server. When disabled, the public key is accepted automatically. Enumeration: 'disabled': 2, 'enabled': 1.
                 hpicfDSnoopV6AuthorizedServerTable 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.2 no-access
Table of authorized DHCP server addresses.
                     hpicfDSnoopV6AuthorizedServerEntry 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.2.1 no-access
A row in the table, containing the address of a single authorized DHCP server.
                         hpicfDSnoopV6AuthorizedServerAddrType 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.2.1.1 inetaddresstype no-access
The IP address type of authorized DHCPv6 server.
                         hpicfDSnoopV6AuthorizedServerAddress 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.2.1.2 inetaddress no-access
The address of a known valid DHCP server. The type of address contained in this object is indicated by hpicfDSnoopV6AuthorizedServerAddrType. To allow a server packet to be forwarded to a client, it must be received on a trusted port from a server address in this table. If this table is empty, all addresses are trusted. Note that this feature compares the source address of the received DHCPv6 server packet against the addresses in this table. Therefore, this table must contain trusted server addresses and trusted DHCPv6 relays that a server packet may be relayed through.
                         hpicfDSnoopV6AuthorizedServerStatus 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.2.1.3 rowstatus read-only
The status of this DHCP server address entry. Only 'active' entries are used when validating DHCP server packets. Row statuses createAndWait(5), notReady(3) and notInService(2) are not supported.
                 hpicfDSnoopV6PortMaxBindingTable 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.3 no-access
This table contains the maximum binding information of port.
                     hpicfDSnoopV6PortMaxBindingEntry 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.3.1 no-access
The maximum number of bindings on the Port.
                         hpicfDSnoopV6PortStaticBinding 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.3.1.2 unsigned32 read-only
This object indicates the static bindings configured on this port.
                         hpicfDSnoopV6PortDynamicBinding 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.3.1.3 unsigned32 read-only
This object indicates the number of dynamic bindings on this port.
                 hpicfDSnoopV6StaticBindingTable 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.4 no-access
This table contains the VLAN ID for binding entry.
                     hpicfDSnoopV6StaticBindingEntry 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.4.1 no-access
Extension of VLAN ID in hpicfSaviObjectsBindingTable.
                         hpicfDSnoopV6BindingVlanId 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.4.1.1 vlanindex read-write
The VLAN on which this client is discovered.
                         hpicfDSnoopV6BindingLLAddress 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.4.1.2 inetaddress read-write
The VLAN on which this client is discovered.
                         hpicfDSnoopV6BindingSecVlan 1.3.6.1.4.1.11.2.14.11.5.1.102.1.1.4.1.3 unsigned32 read-only
The secondary VLAN on which this client is discovered. if binding is learned on primary or normal VLAN, this object will be zero.
             hpicfDSnoopV6GlobalStats 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2
                 hpicfDSnoopV6CSForwards 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.1 counter32 read-only
Number of snooped DHCPv6 packets that were successfully forwarded from untrusted client ports towards trusted DHCPv6 server ports.
                 hpicfDSnoopV6CSMACMismatches 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.2 counter32 read-only
Number of snooped DHCPv6 client packets that were discarded due to MAC verification check failure.
                 hpicfDSnoopV6CSBadReleases 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.3 counter32 read-only
Number of snooped DHCPv6 client packets that were discarded because they were RELEASE packets received on a port different from the port that the address was leased to.
                 hpicfDSnoopV6CSUntrustedDestPorts 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.4 counter32 read-only
Number of snooped DHCPv6 client unicast packets that were discarded because they were destined to untrusted ports.
                 hpicfDSnoopV6SCForwards 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.5 counter32 read-only
Number of snooped DHCPv6 packets that were successfully forwarded from trusted DHCPv6 server ports to untrusted client ports.
                 hpicfDSnoopV6SCUntrustedPorts 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.6 counter32 read-only
Number of snooped DHCPv6 server packets that were dropped because they were received on untrusted ports.
                 hpicfDSnoopV6SCRelayReplyUntrustedPorts 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.7 counter32 read-only
Number of relay reply packets that were dropped by the switch because they were received on untrusted ports.
                 hpicfDSnoopV6SCUnauthorizedServers 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.8 counter32 read-only
Number of snooped DHCPv6 server packets that were discarded because they were received from unauthorized DHCPv6 server
                 hpicfDSnoopV6DBFileWriteAttempts 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.9 counter32 read-only
Number of attempts that have been made to write the DHCPv6 lease database to a configured file location.
                 hpicfDSnoopV6DBFileWriteFailures 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.10 counter32 read-only
Number of times that an attempt to write the DHCPv6 lease database to a configured file location has failed.
                 hpicfDSnoopV6DBFileReadStatus 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.11 integer read-only
This object indicates whether the DHCPv6 lease database from configured location is loaded successfully after the last reboot. Enumeration: 'failed': 4, 'inProgress': 2, 'succeeded': 3, 'notConfigured': 1.
                 hpicfDSnoopV6DBFileWriteStatus 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.12 integer read-only
This object indicates whether the DHCPv6 lease database is currently synchronized with the the configured file server. 'notConfigured' means that the switch is not configured with a server location. 'delaying' means the switch is waiting for the write delay to expire before writing the current database. 'inProgress' means that a lease database transfer is active. 'succeeded' means that all leases in our database have been written to the server. 'failed' means that the last attempt to write our lease database failed. Enumeration: 'failed': 5, 'inProgress': 3, 'delaying': 2, 'succeeded': 4, 'notConfigured': 1.
                 hpicfDSnoopV6DBFileLastWriteTime 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.13 dateandtime read-only
Time at which the switch last successfully wrote the lease database to the server. This object contains a value of all zeroes if lease database is not written since the last reboot.
                 hpicfDSnoopV6MaxbindPktsDropped 1.3.6.1.4.1.11.2.14.11.5.1.102.1.2.14 counter32 read-only
This object provides the total number of DHCPv6 snooping packets dropped by the switch. A switch drops the DHCPv6 snooping packets on a port when the port exceeds maximum binding limit configured on it.
             hpicfDSnoopV6ClearStatsOptions 1.3.6.1.4.1.11.2.14.11.5.1.102.1.3
                 hpicfDSnoopV6ClearStats 1.3.6.1.4.1.11.2.14.11.5.1.102.1.3.1 truthvalue read-write
This object clears the DSNOOPv6 statistics when set to TRUE. A write operation of FALSE leads to a no operation and a get request for this object always returns FALSE.
         hpicfDSnoopV6Conformance 1.3.6.1.4.1.11.2.14.11.5.1.102.2
             hpicfDSnoopV6Groups 1.3.6.1.4.1.11.2.14.11.5.1.102.2.1
                 hpicfDSnoopV6BaseGroup 1.3.6.1.4.1.11.2.14.11.5.1.102.2.1.1
A collection of objects for configuring and monitoring the base DHCPv6 snooping functionality.
                 hpicfDSnoopV6ServersGroup 1.3.6.1.4.1.11.2.14.11.5.1.102.2.1.2
A collection of objects for configuring and monitoring DHCP snooping trusted servers.
                 hpicfDSnoopV6DbaseFileGroup 1.3.6.1.4.1.11.2.14.11.5.1.102.2.1.3
A collection of objects for configuring and monitoring DHCP snooping database file management.
                 hpicfDSnoopV6MaxBindingsGroup 1.3.6.1.4.1.11.2.14.11.5.1.102.2.1.4
A collection of objects for monitoring the binding limits on a port.
                 hpicfDSnoopV6StaticBindingsGroup 1.3.6.1.4.1.11.2.14.11.5.1.102.2.1.5
A collection of objects used to configure static binding for a VLAN.
                 hpicfDSnoopV6ClearStatsOptionsGroup 1.3.6.1.4.1.11.2.14.11.5.1.102.2.1.6
A collection of objects used to clear DSNOOPv6 statistics.
                 hpicfDSnoopV6TrapObjectsGroup 1.3.6.1.4.1.11.2.14.11.5.1.102.2.1.7
A collection of objects used in the DSNOOPv6 notification.
                 hpicfDSnoopV6TrapsGroup 1.3.6.1.4.1.11.2.14.11.5.1.102.2.1.8
A collection of trap objects that provide DSNOOPv6 notifications.
                 hpicfDSnoopV6DbaseFileGroup1 1.3.6.1.4.1.11.2.14.11.5.1.102.2.1.9
A collection of objects for configuring and monitoring DHCP snooping database file management.
             hpicfDSnoopV6Compliances 1.3.6.1.4.1.11.2.14.11.5.1.102.2.3
                 hpicfDSnoopV6Compliance2 1.3.6.1.4.1.11.2.14.11.5.1.102.2.3.1
The compliance statement for HP Routing switches that support DHCPv6 Snooping.
                 hpicfDSnoopV6Compliance 1.3.6.1.4.1.11.2.14.11.5.1.102.2.3.2
The compliance statement for HP Routing switches that support DHCPv6 Snooping.