HP-ICF-BASIC: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HP-ICF-BASIC
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, RMON-MIB, SNMP-TARGET-MIB, HP-ICF-OID, ENTITY-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpicfBasicMib 1.3.6.1.4.1.11.2.14.10.2.5
This MIB module describes objects for basic management of devices in the HP Integrated Communication Facility product line.
     hpicfBasicConformance 1.3.6.1.4.1.11.2.14.10.2.5.1
         hpicfBasicCompliances 1.3.6.1.4.1.11.2.14.10.2.5.1.1
             hpicfBasicCompliance 1.3.6.1.4.1.11.2.14.10.2.5.1.1.1
********* THIS COMPLIANCE IS DEPRECATED ********* A compliance statement for basic management and configuration of HP ICF hubs.
             hpicfNewBasicCompliance 1.3.6.1.4.1.11.2.14.10.2.5.1.1.2
********* THIS COMPLIANCE IS DEPRECATED ********* A new compliance statement for this module.
             hpicfBasicCompliance3 1.3.6.1.4.1.11.2.14.10.2.5.1.1.3
********* THIS COMPLIANCE IS DEPRECATED *********
             hpicfBasicCompliance4 1.3.6.1.4.1.11.2.14.10.2.5.1.1.4
********* THIS COMPLIANCE IS DEPRECATED *********
             hpicfBasicCompliance5 1.3.6.1.4.1.11.2.14.10.2.5.1.1.5
********* THIS COMPLIANCE IS DEPRECATED *********
             hpicfBasicCompliance6 1.3.6.1.4.1.11.2.14.10.2.5.1.1.6
********* THIS COMPLIANCE IS DEPRECATED *********
             hpicfBasicCompliance7 1.3.6.1.4.1.11.2.14.10.2.5.1.1.7
********* THIS COMPLIANCE IS DEPRECATED *********
             hpicfBasicSNMPConfigCompliance 1.3.6.1.4.1.11.2.14.10.2.5.1.1.8
The compliance statement for SNMP entities which implements enabling/disabling of SNMP v1/v2/v3 and for enabling/disabling SNMP support for hpSwitchAuthenticationMIB.
             hpicfBasicConfigCompliance 1.3.6.1.4.1.11.2.14.10.2.5.1.1.9
The compliance statement for config entities which implements basic configuration of the switch.
             hpicfBasicComplianceOobm 1.3.6.1.4.1.11.2.14.10.2.5.1.1.10
The compliance statement for devices implementing the HP DNS Server Mib with OOBM support
             hpicfBasicCompliance8 1.3.6.1.4.1.11.2.14.10.2.5.1.1.11
The compliance statement for SNMP entities SNMP support for hpSwitchAuthenticationMIB.
             hpicfBasicCompliance9 1.3.6.1.4.1.11.2.14.10.2.5.1.1.12
The compliance statement for SNMP entities which implements DNS domain configurations.
             hpicfBasicCompliance10 1.3.6.1.4.1.11.2.14.10.2.5.1.1.13
The compliance statement for SNMP entities which implements DNS domain configurations.
             hpicfBasicCompliance11 1.3.6.1.4.1.11.2.14.10.2.5.1.1.14
The compliance statement for SNMP entities which implements DNS domain configurations.
             hpicfBasicCompliance12 1.3.6.1.4.1.11.2.14.10.2.5.1.1.15
The compliance statement for SNMP entities SNMP support for hpSwitchAuthenticationMIB.
             hpicfBasicLogFilterConfigCompliance 1.3.6.1.4.1.11.2.14.10.2.5.1.1.16
The compliance statement for devices implementing support for log filtering.
             hpicfBasicCompliance13 1.3.6.1.4.1.11.2.14.10.2.5.1.1.17
The compliance statement for SNMP entities that implement support for hpSwitchAuthenticationMIB and web management session configurations.
             hpicfBasicSNMPConfigCompliance1 1.3.6.1.4.1.11.2.14.10.2.5.1.1.18
The compliance statement for SNMP entities which implements enabling/disabling of SNMP v1/v2/v3, enabling/disabling SNMP support for hpSwitchAuthenticationMIB, and allowing/blocking the unsecured SNMP access to hpicfMACsec MIB and ieee8021SecY MIB.
             hpicfBasicCompliance19 1.3.6.1.4.1.11.2.14.10.2.5.1.1.19
The compliance statement for SNMP entities that implement support for the HP ICF basic MIB.
             hpicfBasicLogFilterConfigCompliance2 1.3.6.1.4.1.11.2.14.10.2.5.1.1.20
The compliance statement for devices implementing support for log filtering.
             hpicfBasicWebAgentCompliance1 1.3.6.1.4.1.11.2.14.10.2.5.1.1.21
The compliance statement for SNMP entities that implement support for hpicfBasicWebAgentGroup2.
             hpicfBasicCurDNSNameServerCompliance1 1.3.6.1.4.1.11.2.14.10.2.5.1.1.22
The compliance statement for SNMP entities that implement support for hpicfBasicCurDNSNameServerGroup1.
             hpicfBasicLogFilterConfigCompliance3 1.3.6.1.4.1.11.2.14.10.2.5.1.1.23
The compliance statement for devices implementing support for log filtering.
         hpicfBasicGroups 1.3.6.1.4.1.11.2.14.10.2.5.1.2
             hpicfBasicGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.1
********* THIS GROUP IS DEPRECATED ********* A collection of objects for basic reset/selftest control on ICF devices.
             hpicfTelnetGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.2
********* THIS GROUP IS DEPRECATED ********* A collection of objects for managing the telnet server on ICF devices.
             hpicfNewBasicGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.3
********* THIS GROUP IS DEPRECATED ********* A collection of objects for basic management of ICF devices.
             hpicfDiscoverGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.4
********* THIS GROUP IS DEPRECATED ********* A collection of objects to assist in discovering and mapping ICF devices.
             hpicfBasicIpConfigGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.5
********* THIS GROUP IS DEPRECATED ********* A collection of objects for configuring the IP protocol stack in ICF agents.
             hpicfBasicIpxConfigGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.6
A collection of objects for configuring the IPX protocol stack in ICF agents.
             hpicfBasicFixedTrapGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.7
A collection of objects for managing fixed (i.e. non-threshold) traps on ICF devices. Implementation of this group requires implementation of the RMON event group.
             hpicfBasicTrapDestGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.8
********* THIS GROUP IS DEPRECATED ********* A collection of objects for configuring trap destinations on ICF devices. Implementation of this group requires implementation of the RMON event group.
             hpicfBasicRmonNVGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.9
A collection of objects for controlling which RMON alarm and event table entries are saved in non-volatile storage.
             hpicfBasicSelfTestNotifyGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.10
A collection of notifications used to indicate changes in selfTest status
             hpicfBasicWebAgentGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.11
********* THIS GROUP IS DEPRECATED ********* A collection of objects for managing the EHTTPD server in ICF devices.
             hpicfAnnounceDiscoveryGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.12
A collection of objects to assist in discovering and mapping ICF devices.
             hpicfBasicIpConfigGroup2 1.3.6.1.4.1.11.2.14.10.2.5.1.2.13
********* THIS GROUP IS DEPRECATED ********* A collection of objects for configuring the IP protocol stack in agents that support only a single global default router.
             hpicfBasicProxyArpGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.14
A group of objects for configuring proxy ARP on devices that support IP forwarding.
             hpicfBasicIpSecondaryGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.15
A group of objects for configuring secondary IP addresses on devices that support more than one IP address on an interface.
             hpicfSnmpTargetAddrLogFilterGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.16
A group of objects to add an HpicfSnmpTargetAddrLogFilterEntry to snmpTargetAddrTable.
             hpicfBasicIpConfigGroup3 1.3.6.1.4.1.11.2.14.10.2.5.1.2.17
A collection of objects for configuring the IP protocol stack in agents that support only a single global default router.
             hpicfBasicBannerGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.18
A group of objects for configuring banners for display on console and web-ui at login
             hpicfBasicDNSConfigGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.19
********* THIS GROUP IS DEPRECATED ********* A collection of objects for configuring the DNS resolver facility in agents that are capable of resolving host names to IP addresses.
             hpicfBasicGroup1 1.3.6.1.4.1.11.2.14.10.2.5.1.2.20
A collection of objects for basic management of ICF devices.
             hpicfSNMPConfigGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.21
********* THIS GROUP IS DEPRECATED ********* A collection of objects for enabling/disabling of SNMP v1/v2/v3 and for enabling/disabling SNMP support for hpSwitchAuthenticationMIB.
             hpicfBasicConfigGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.22
A collection of objects for basic configuration of the switch.
             hpicfInetDNSNameServerOobmGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.23
A collection of objects for configuring the DNS server entry with support for OOBM (Out of Band Management) interface.
             hpicfBasicObjectsGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.24
A collection of deprecated objects
             hpicfBasicDNSGroup1 1.3.6.1.4.1.11.2.14.10.2.5.1.2.25
********* THIS GROUP IS DEPRECATED ********* A collection of objects for DNS configuration parameters.
             hpicfBasicDNSConfigGroup1 1.3.6.1.4.1.11.2.14.10.2.5.1.2.26
A collection of objects for configuring the DNS resolver facility in agents that are capable of resolving host names to IP addresses.
             hpicfBasicObjectsGroup1 1.3.6.1.4.1.11.2.14.10.2.5.1.2.27
A collection of deprecated objects
             hpicfBasicDNSConfigGroup2 1.3.6.1.4.1.11.2.14.10.2.5.1.2.28
A collection of objects for configuring the DNS resolver facility in agents that are capable of resolving host names to IP addresses.
             hpicfBasicDNSGroup2 1.3.6.1.4.1.11.2.14.10.2.5.1.2.29
A collection of objects for DNS configuration parameters.
             hpicfBasicLogFilterConfigGroup 1.3.6.1.4.1.11.2.14.10.2.5.1.2.30
A collection of objects for log filters configuration.
             hpicfBasicWebAgentGroup1 1.3.6.1.4.1.11.2.14.10.2.5.1.2.31
********* THIS GROUP IS DEPRECATED ********* A collection of objects for managing the web management sessions.
             hpicfSNMPConfigGroup1 1.3.6.1.4.1.11.2.14.10.2.5.1.2.32
A collection of objects for enabling/disabling of SNMP v1/v2/v3, for enabling/disabling SNMP support for hpSwitchAuthenticationMIB, for allowing/blocking of hpicfSwitchSnmpAllowUnsecuredAccessToMACsec and for allowing/blocking of hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy.
             hpicfBasicLogFilterConfigGroup2 1.3.6.1.4.1.11.2.14.10.2.5.1.2.33
A collection of objects for log filters configuration.
             hpicfBasicWebAgentGroup2 1.3.6.1.4.1.11.2.14.10.2.5.1.2.34
A group of objects for managing web sessions.
             hpicfBasicCurDNSNameServerGroup1 1.3.6.1.4.1.11.2.14.10.2.5.1.2.35
A collection of objects for managing DNS.
             hpicfBasicLogFilterConfigGroup3 1.3.6.1.4.1.11.2.14.10.2.5.1.2.36
A collection of objects for log filters configuration.
 hpicfBasic 1.3.6.1.4.1.11.2.14.11.1.4
     hpicfReset 1.3.6.1.4.1.11.2.14.11.1.4.1 integer read-write
When this object is set to 'normalReset' it results in a 'powerup' reset of the device. When set to 'agentReset', it results in a reset of the agent software, without resetting the device hardware. When this object is set, the agent replies, dallies a short time to allow the reply to be emitted from the device, then performs the reset. When read, this object always returns 'noReset'. Enumeration: 'noReset': 1, 'agentReset': 4, 'normalReset': 2.
     hpicfSelfTest 1.3.6.1.4.1.11.2.14.11.1.4.2 integer read-write
Self test is invoked by setting this flag to 'stExecute'. When the object changes to 'stSuccess', the test has completed successfully. Enumeration: 'stExecute': 2, 'stSuccess': 1.
     hpicfTelnetEnable 1.3.6.1.4.1.11.2.14.11.1.4.3 integer read-write
When the value of this object is 'enabled(1)', the telnet server on this agent is running and allowed to accept connections. When the value of this object is 'disabled(2)', no incoming telnet connections will be accepted by this agent. Whether the telnet server continues running when this object is set to 'disabled(2)' is implementation dependent. Enumeration: 'disabled': 2, 'enabled': 1.
     hpicfConfigClear 1.3.6.1.4.1.11.2.14.11.1.4.4 integer read-write
When this object is set to 'configClear', the agent replies, dallies a short time to allow the reply to be emitted from the device, clears all of its nonvolitile parameters back to their factory defaults then resets the device. Note that this will result in all parameters being cleared, including network configuration. This function should be used with extreme caution. When read, this object always returns 'running'. Enumeration: 'running': 1, 'configClear': 2.
     hpicfSelfTestResult 1.3.6.1.4.1.11.2.14.11.1.4.5
         hpicfSelfTestResultCode 1.3.6.1.4.1.11.2.14.11.1.4.5.1 integer read-only
If the value of this object is 'softFailure', the agent is up and running, but has detected a non-critical failure. The value of the hpicfSelfTestResultText will contain further information about the type of failure that was detected and may contain information about how to remedy the situation. Enumeration: 'ok': 1, 'softFailure': 2.
         hpicfSelfTestResultText 1.3.6.1.4.1.11.2.14.11.1.4.5.2 displaystring read-only
If the value of the hpicfSelfTestResultCode object is 'softFailure', this text string contains detailed information about the most recently detected failure, including information about the type of failure that was detected, and possibly information about how to remedy the situation. If the value of the hpicfSelfTestResultCode object is 'ok', this object will contain a zero-length octet string.
         hpicfSelfTestResultTime 1.3.6.1.4.1.11.2.14.11.1.4.5.3 timestamp read-only
This object contains the value of sysUpTime at the time the agent detected the failure currently being reported by hpicfSelfTestResultCode and hpicfSelfTestResultText. If the value of the hpicfSelfTestResultCode is 'ok', or if the current failure was detected before the SNMP agent initialized, this object will have the value 0.
     hpicfWebAgentEnable 1.3.6.1.4.1.11.2.14.11.1.4.6 integer read-write
When the value of this object is 'enabled(1)', the ehttpd server on this agent is running and allowed to accept connections. When the value of this object is 'disabled(2)', no incoming ehttpd connections will be accepted by this agent. Whether the ehttpd server continues running when this object is set to 'disabled(2)' is implementation dependent. Enumeration: 'disabled': 2, 'enabled': 1.
     hpicfBasicDiscovery 1.3.6.1.4.1.11.2.14.11.1.4.7
         hpicfAnnounceTable 1.3.6.1.4.1.11.2.14.11.1.4.7.1 no-access
********* THIS OBJECT IS DEPRECATED ********* A table of per-device network announcement addresses. This table is used to cause the transmission of announcement packets for a particular logical device to a specified address. This is used as part of topology mapping to determine the network connectivity of a device on the network.
             hpicfAnnounceEntry 1.3.6.1.4.1.11.2.14.11.1.4.7.1.1 no-access
********* THIS OBJECT IS DEPRECATED ********* A row in the table, containing the announcement address for a single entity.
                 hpicfAnnounceAddress 1.3.6.1.4.1.11.2.14.11.1.4.7.1.1.1 macaddress read-write
********* THIS OBJECT IS DEPRECATED ********* Seting an instance of this object to any MAC address will trigger the agent to transmit three announcement packets on an interface associated with the logical entity. These packets will use a MAC source address set to the agent's MAC address on that interface, a MAC destination address equal to the value of the instance of this object, a destination LSAP of 0xF8, and a destination HP XSAP of 0x165d.
         hpicfIfToEntityTable 1.3.6.1.4.1.11.2.14.11.1.4.7.2 no-access
********* THIS OBJECT IS DEPRECATED ********* This table is used to map an interface index to a logical entity index. This table is mainly used by autodiscovery to figure out which entLogicalIndex corresponds to a particular network address. This table is not intended as a general purpose mapping. In particular, in some systems the same interface can be in use by multiple logical entities. Also, there is no requirement that ifIndex is unique across all logical entities (such as the case where multiple agents in the same chassis each assign ifIndex without knowledge of how the other agents are assigning ifIndex). Therefore, these mappings are only defined to hold for the special purpose of getting from the discovered transport address for a logical device to the entLogicalIndex needed for announce address and search address. Also, note that this table will not contain entries for all of the values of ifIndex. It will only contain entries for interfaces that can be used for sending announcement packets for some logical entity.
             hpicfIfToEntityEntry 1.3.6.1.4.1.11.2.14.11.1.4.7.2.1 no-access
********* THIS OBJECT IS DEPRECATED ********* A row in the table, containing the ifIndex to entLogicalIndex mapping for a single interface.
                 hpicfIfEntLogicalIndex 1.3.6.1.4.1.11.2.14.11.1.4.7.2.1.1 integer32 read-only
********* THIS OBJECT IS DEPRECATED ********* This object identifies the entLogicalIndex of a device that can be mapped using this interface. An entLogicalEntry identified by a value of an instance of this object is the same entry identified by the same value of an instance of entLogicalIndex.
         hpicfAnnounceDiscoveryTable 1.3.6.1.4.1.11.2.14.11.1.4.7.3 no-access
A table of per-device network announcement addresses. This table is used to cause the transmission of announcement packets for a particular logical device to a specified address. This is used as part of topology mapping to determine the network connectivity of a device on the network.
             hpicfAnnounceDiscoveryEntry 1.3.6.1.4.1.11.2.14.11.1.4.7.3.1 no-access
A row in the table, containing the announcement address for a single entity.
                 hpicfAnnounceDiscoveryAddress 1.3.6.1.4.1.11.2.14.11.1.4.7.3.1.1 macaddress read-write
Seting an instance of this object to any MAC address will trigger the agent to transmit three announcement packets on an interface associated with the logical entity. These packets will use a MAC source address set to the agent's MAC address on that interface, a MAC destination address equal to the value of the instance of this object, a destination LSAP of 0xF8, and a destination HP XSAP of 0x165d.
     hpicfBasicIpConfig 1.3.6.1.4.1.11.2.14.11.1.4.8
         hpicfIpConfigTable 1.3.6.1.4.1.11.2.14.11.1.4.8.1 no-access
********* THIS OBJECT IS DEPRECATED ********* This table contains per-interface IP configuration information.
             hpicfIpConfigEntry 1.3.6.1.4.1.11.2.14.11.1.4.8.1.1 no-access
********* THIS OBJECT IS DEPRECATED ********* An entry in the hpicfIpConfigTable containing the IP configuration information for a single interface.
                 hpicfIpConfigAddress 1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.1 ipaddress read-write
********* THIS OBJECT IS DEPRECATED ********* This variable contains the IP address for this interface.
                 hpicfIpConfigAddrMask 1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.2 ipaddress read-write
********* THIS OBJECT IS DEPRECATED ********* This variable contains the IP subnet mask for this interface.
                 hpicfIpConfigDefaultRouter 1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.3 ipaddress read-write
********* THIS OBJECT IS DEPRECATED ********* This variable contains the IP address of the default router for this interface. For SLIP interfaces, this object contains the IP address of the node at the other end of the serial connection.
                 hpicfIpConfigPingRouter 1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.4 truthvalue read-write
********* THIS OBJECT IS DEPRECATED ********* This object is used to configure whether this agent will periodically send ICMP echo request packets to the IP default router for this interface. Since a networking device typically does not transmit unless it receives a management request, and since some autodiscovery applications work by scanning ARP caches, this ICMP echo can be used to try to stay in our default router's ARP cache so that we can be discovered. This object allows the network manager to enable or disable sending these ICMP echo requests.
                 hpicfIpConfigMtu 1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.5 integer32 read-write
********* THIS OBJECT IS DEPRECATED ********* This object is used to configure the largest datagram that IP will send on this interface. Note that for some interface types, this value may not be changeable, and this object will be implemented as read-only on those interfaces. Also note that most interfaces will not allow the full range of values defined above, since the upper limit on the MTU is constrained by the interface type.
                 hpicfIpConfigAdminStatus 1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.6 integer read-write
********* THIS OBJECT IS DEPRECATED ********* Setting this flag to 'learn' (the default) will clear any existing IP address configuration for this interface, and will cause the device to use a dynamic method (e.g. BootP) to obtain its IP configuration for this interface. This flag must be set to 'useConfigured' in order to configure an IP address for the interface. Setting this flag to 'disable' will disable the IP protocol stack on this interface. Enumeration: 'disable': 1, 'useConfigured': 2, 'learn': 3.
                 hpicfIpConfigProxyArp 1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.7 integer read-write
********* THIS OBJECT IS DEPRECATED ********* Enables/disables ARP proxy on the interface. If set to enabled(1), the switch will respond on ARP request for IP addresses from other subnets. Enumeration: 'disabled': 2, 'enabled': 1.
                 hpicfIpConfigLocalProxyArp 1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.8 integer read-write
********* THIS OBJECT IS DEPRECATED ********* Enables/disables local ARP proxy on the interface. If set to enabled(1), the switch will respond on ARP request for IP addresses from local subnets. Enumeration: 'disabled': 2, 'enabled': 1.
         hpicfIpAddrTable 1.3.6.1.4.1.11.2.14.11.1.4.8.2 no-access
********* THIS OBJECT IS DEPRECATED ********* A table that contains the secondary addresses configured for an interface.
             hpicfIpAddrEntry 1.3.6.1.4.1.11.2.14.11.1.4.8.2.1 no-access
********* THIS OBJECT IS DEPRECATED ********* Information about a secondary IP address assigned to an interface.
                 hpicfIpAddrAddr 1.3.6.1.4.1.11.2.14.11.1.4.8.2.1.1 ipaddress no-access
********* THIS OBJECT IS DEPRECATED ********* The secondary IP address.
                 hpicfIpAddrMask 1.3.6.1.4.1.11.2.14.11.1.4.8.2.1.2 ipaddress read-only
********* THIS OBJECT IS DEPRECATED ********* The subnet mask for the address. If not specified at the time of row creation, defaults to the class-based netmask for the address.
                 hpicfIpAddrStatus 1.3.6.1.4.1.11.2.14.11.1.4.8.2.1.3 rowstatus read-only
********* THIS OBJECT IS DEPRECATED ********* The status of an IP Address entry.
         hpicfIpGlobalDefaultRouter 1.3.6.1.4.1.11.2.14.11.1.4.8.3 ipaddress read-write
This variable contains the IP address of the default router for this system. The value of this object is ignored when ipForwarding is equal to 'forwarding'. This object is only used when hpicfIpGlobalDefaultRouterSource is 'manual'. Note that a configured static route to address 0.0.0.0 takes precedence over the value of this object.
         hpicfIpGlobalPingRouter 1.3.6.1.4.1.11.2.14.11.1.4.8.4 truthvalue read-write
This object is used to configure whether this device will periodically send ICMP echo request packets to its IP default router. Since a networking device typically does not transmit unless it receives a management request, and since some autodiscovery applications work by scanning ARP caches, this ICMP echo can be used to try to stay in our default router's ARP cache so that we can be discovered. This object allows the network manager to enable or disable sending these ICMP echo requests. The value of this object is ignored when ipForwarding is equal to 'forwarding'.
         hpicfIpZeroBroadcastEnable 1.3.6.1.4.1.11.2.14.11.1.4.8.5 truthvalue read-write
This object is used to configure whether switch should silently discard on receipt any packet addressed to 0.0.0.0 or {, 0}.If these packets are not silently discarded, they must be treated as IP broadcasts.This object is by default configured to discard zero broadcast packet
     hpicfBasicIpxConfig 1.3.6.1.4.1.11.2.14.11.1.4.9
         hpicfIpxConfigTable 1.3.6.1.4.1.11.2.14.11.1.4.9.1 no-access
This table contains IPX per-interface configuration information that will take effect after the next reset of the device.
             hpicfIpxConfigEntry 1.3.6.1.4.1.11.2.14.11.1.4.9.1.1 no-access
An entry in the hpicfIpxConfigTable containing the IPX configuration information for a single interface.
                 hpicfIpxConfigNodeAddress 1.3.6.1.4.1.11.2.14.11.1.4.9.1.1.1 macaddress read-only
The IPX node address that the agent will use for this interface. Note that in many, but not all, cases, this object duplicates the value of ifPhysAddress.
                 hpicfIpxConfigDefaultRouter 1.3.6.1.4.1.11.2.14.11.1.4.9.1.1.2 macaddress read-write
The IPX node address of the default router for this interface.
                 hpicfIpxConfigRouterEncaps 1.3.6.1.4.1.11.2.14.11.1.4.9.1.1.3 integer read-write
The type of encapsulation to for packets sent to the default router on this interface. Note that some of the enumerations for this object may not be appropriate for some interface types. Enumeration: 'noGateway': 5, 'ieee8022': 2, 'ethernetII': 1, 'learn': 6, 'snap': 3, 'ieee8023Raw': 4.
                 hpicfIpxConfigAdminStatus 1.3.6.1.4.1.11.2.14.11.1.4.9.1.1.4 integer read-write
Setting this flag to 'enable' (the default) will enable the IPX protocol stack on this interface. Setting this flag to 'disable' will disable the IPX protocol stack on this interface. Enumeration: 'enable': 1, 'disable': 2.
         hpicfIpxNetTable 1.3.6.1.4.1.11.2.14.11.1.4.9.2 no-access
This table contains the IPX network number in use for each encapsulation type on the agent's interfaces. This information is learned dynamically by the agent. An entry will only exist in this table for a particular encapsulation type on a particular interface if we have discovered a network number for that encapsulation type on that interface.
             hpicfIpxNetEntry 1.3.6.1.4.1.11.2.14.11.1.4.9.2.1 no-access
An entry in the table, containing the IPX network number for a single encapsulation type on one of the agent's interfaces.
                 hpicfIpxNetEncaps 1.3.6.1.4.1.11.2.14.11.1.4.9.2.1.1 integer no-access
The encapsulation type for this entry. Enumeration: 'snap': 3, 'ieee8022': 2, 'ethernetII': 1, 'ieee8023Raw': 4.
                 hpicfIpxNetNumber 1.3.6.1.4.1.11.2.14.11.1.4.9.2.1.2 octet string read-only
The IPX network number for this encapsulation on this interface, in network byte order.
     hpicfBasicTraps 1.3.6.1.4.1.11.2.14.11.1.4.10
           hpicfFixedTrapTable 1.3.6.1.4.1.11.2.14.11.1.4.10.1 no-access
A table of mappings from notification ids to RMON events. This table contains one row for each notification type supported by the agent. It provides a way of configuring an RMON eventTable entry to be triggered whenever this notification occurs. This way, each notification can be configured to use a particular community name (which selects a set of entries in the trap destination table to send the notification to), and provides a common point for configuring the action to take when the notification condition occurs.
               hpicfFixedTrapEntry 1.3.6.1.4.1.11.2.14.11.1.4.10.1.1 no-access
An entry in the table, describing the mapping for a single notification id.
                   hpicfFixedTrapID 1.3.6.1.4.1.11.2.14.11.1.4.10.1.1.1 object identifier no-access
The object identifier of the notification this entry provides mapping information for. For notifications that are defined using the SNMPv2 NOTIFICATION-TYPE macro, the OID value assigned by the macro is used directly as the hpicfFixedTrapID. For traps defined using the SNMpv1 TRAP-TYPE macro, the value of hpicfFixedTrapID is formed by adding two sub IDs to the trap enterprise. The first added sub ID is 0, and the second is the specific trap value assigned by the macro to the trap. Note: this is the method specified in RFC 1908, 'Coexistence between Version 1 and Version 2 of the Internet-standard Network Management Framework' for converting the enterprise and specific-trap fields of a received Trap-PDU into a value of snmpTrapOID for use in building an SNMPv2-Trap-PDU in a proxy agent.
                   hpicfFixedTrapEventIndex 1.3.6.1.4.1.11.2.14.11.1.4.10.1.1.2 integer32 read-write
The index of the eventEntry in the RMON MIB that will be triggered when a condition exists for which this notification is supposed to be sent. The eventEntry identified by a particular value of this index is the same as indentified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. Note that some agents may implement this object read-only. In this case, it will indicate a permanent entry in the eventTable for each notification.
           hpicfTrapDestTable 1.3.6.1.4.1.11.2.14.11.1.4.10.2 no-access
*************THIS OBJECT IS DEPRECATED ********** A table of trap destinations.
               hpicfTrapDestEntry 1.3.6.1.4.1.11.2.14.11.1.4.10.2.1 no-access
An entry in the table, containing information about a single trap destination.
                   hpicfTrapDestIndex 1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.1 integer32 no-access
*************THIS OBJECT IS DEPRECATED ********** A value that uniquely identifies this hpicfTrapDestEntry.
                   hpicfTrapDestVersion 1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.2 integer read-only
*************THIS OBJECT IS DEPRECATED ********** This object is used to indicate what version of SNMP should be used to send the trap to this destination. When the value of this object is 'snmpv1', the trap will be sent to this destination as a Trap-PDU using an SNMPv1 message wrapper, as specified in RFC 1157. When the value of this object is 'snmpv2c', the trap will be sent to this destination as a SNMPv2-Trap-PDU using the Community-based SNMPv2 framework as specified in RFC 1901. An agent should reject an attempt to set an instance of this object to a value representing a version of the SNMP framework that is not supported by that agent. Enumeration: 'snmpv2c': 2, 'snmpv1': 1.
                   hpicfTrapDestCommunity 1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.3 octet string read-only
*************THIS OBJECT IS DEPRECATED ********** A community to which this destination address belongs. This entry is associated with any entry in the RMON MIB's eventTable whose value of eventCommunity is equal to the value of this object. Every time an associated event entry sends a trap due to an event, that trap will be sent to each address in the hpicfTrapDestTable with a hpicfTrapDestCommunity equal to eventCommunity. This object may not be modified if the associated hpicfTrapDestStatus object is equal to active(1).
                   hpicfTrapDestTDomain 1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.4 tdomain read-only
*************THIS OBJECT IS DEPRECATED ********** The transport domain to use to send this trap. This object may not be modified if the associated hpicfTrapDestStatus object is equal to active(1).
                   hpicfTrapDestTAddress 1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.5 taddress read-only
*************THIS OBJECT IS DEPRECATED ********** The address to send traps to on behalf of this entry, formatted according to the value of the corresponding instance of the hpicfTrapDestTDomain object. This object may not be modified if the associated hpicfTrapDestStatus object is equal to active(1).
                   hpicfTrapDestFilter 1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.6 integer32 read-only
*************THIS OBJECT IS DEPRECATED ********** The type of events that will be sent to this trap receiver. This filter is mainly used for limiting 'system event' traps that will be sent to a specific receiver. This filter is specified as a sum of values, where each value specifies a classification of traps that will be sent to this trap receiver. The value for a particular trap class C is computed as 2 raised to a value representing C. The trap classes are defined as follows: C (bit#) Trap class ----------------------------------------------- 0 SNMP traps 1 informational events 2 warning events 3 critical events 4 debug events (HP internal use only) For example, to specify that this trap receiver should receive SNMP traps and critical event traps, this object should be set to a value of 9 (2^0 + 2^3). Note that some agents may not support trap filtering. Those agents may either implement this object as read-only, or with a restricted write syntax.
                   hpicfTrapDestStatus 1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.7 rowstatus read-only
*************THIS OBJECT IS DEPRECATED ********** The status of this trap destination entry. An entry may not exist in the active state unless all of the objects in the entry are consistent. In particular, the value of hpicfTrapDestAddress must have a legal length and value for the protocol specified by hpicfTrapDestProtocol.
                   hpicfTrapDestNotifyType 1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.8 integer read-only
*************THIS OBJECT IS DEPRECATED ********** This object is used to indicate what type of SNMP trap/informs should be used. When the value of this object is 'trap', notifications will be sent. When the value of this object is 'inform', informs will be sent. Enumeration: 'inform': 2, 'trap': 1.
                   hpicfTrapDestRetries 1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.9 integer32 read-only
*************THIS OBJECT IS DEPRECATED ********** This object is used to indicate what number of retries to be attempted when a response is not received for a generated message.
                   hpicfTrapDestTimeout 1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.10 timeinterval read-only
*************THIS OBJECT IS DEPRECATED ********** This object is used to indicate what number of seconds between retries to be attempted when a response is not received for a generated message.
     hpicfBasicRmon 1.3.6.1.4.1.11.2.14.11.1.4.11
           hpicfBasicAlarm 1.3.6.1.4.1.11.2.14.11.1.4.11.3
               hpicfBasicAlarmNVCapacity 1.3.6.1.4.1.11.2.14.11.1.4.11.3.1 integer32 read-only
The maximum number of alarmTable entries this agent is capable of saving in nonvolatile storage.
               hpicfBasicAlarmTable 1.3.6.1.4.1.11.2.14.11.1.4.11.3.2 no-access
HP ICF specific extension to the RMON alarm table.
                   hpicfBasicAlarmEntry 1.3.6.1.4.1.11.2.14.11.1.4.11.3.2.1 no-access
Extensions for a single row in the RMON alarm table.
                       hpicfBasicAlarmStorageType 1.3.6.1.4.1.11.2.14.11.1.4.11.3.2.1.1 storagetype read-only
The storage type for this alarm entry.
           hpicfBasicEvent 1.3.6.1.4.1.11.2.14.11.1.4.11.9
               hpicfBasicEventNVCapacity 1.3.6.1.4.1.11.2.14.11.1.4.11.9.1 integer32 read-only
The maximum number of eventTable entries this agent is capable of saving in nonvolatile storage.
               hpicfBasicEventTable 1.3.6.1.4.1.11.2.14.11.1.4.11.9.2 no-access
HP ICF specific extension to the RMON event table.
                   hpicfBasicEventEntry 1.3.6.1.4.1.11.2.14.11.1.4.11.9.2.1 no-access
Extensions for a single row in the RMON event table.
                       hpicfBasicEventStorageType 1.3.6.1.4.1.11.2.14.11.1.4.11.9.2.1.1 storagetype read-only
The storage type for this event entry. Rows having the value 'permanent' allow write access to the associated instances of eventCommunity and eventType.
     hpicfBasicSnmpTargetAddrLogFilter 1.3.6.1.4.1.11.2.14.11.1.4.12
           hpicfSnmpTargetAddrLogFilterTable 1.3.6.1.4.1.11.2.14.11.1.4.12.1 no-access
Adds an HpicfSnmpTargetAddrLogFilterEntry to snmpTargetAddrTable.
               hpicfSnmpTargetAddrLogFilterEntry 1.3.6.1.4.1.11.2.14.11.1.4.12.1.1 no-access
Adds an HpicfSnmpTargetAddrLogFilterEntry to snmpTargetAddrTable.
                   hpicfSnmpTargetAddrLogFilter 1.3.6.1.4.1.11.2.14.11.1.4.12.1.1.1 integer32 read-only
The type of events that will be sent to this trap receiver. This filter is mainly used for limiting 'system event' traps that will be sent to a specific receiver. This filter is specified as a sum of values, where each value specifies a classification of traps that will be sent to this trap receiver. The value for a particular trap class C is computed as 2 raised to a value representing C. The trap classes are defined as follows: C (bit#) Trap class ----------------------------------------------- 0 SNMP traps 1 informational events 2 warning events 3 critical events 4 debug events (HP internal use only) For example, to specify that this trap receiver should receive SNMP traps and critical event traps, this object should be set to a value of 9 (2^0 + 2^3). Note that some agents may not support trap filtering. Those agents may either implement this object as read-only, or with a restricted write syntax.
     hpicfBannerStatus 1.3.6.1.4.1.11.2.14.11.1.4.13 integer read-write
When the value of this object is 'enabled(1)', it means that the banner has been configured and will be displayed at console or web-ui login. When the value of this object is disabled(2), it means the banner has been unconfigured. Enumeration: 'disabled': 2, 'enabled': 1.
     hpicfBanner 1.3.6.1.4.1.11.2.14.11.1.4.14
           hpicfBannerMOTD 1.3.6.1.4.1.11.2.14.11.1.4.14.1 octet string read-write
An administratively configured message that is displayed to the user when logged in to the device through either the console or web-ui
           hpicfExecBannerStatus 1.3.6.1.4.1.11.2.14.11.1.4.14.2 integer read-write
When the value of this object is 'enabled(1)', it means that the exec banner is configured. If authentication is enabled on the switch, exec banner is displayed after authentication in user interface sessions(console,telnet, SSH and webUI). When there is no authentication in the switch,exec banner is displayed before the switch prompt. When the value of this object is 'disabled (2)', it means that banner has not been configured. If the value of this object is 'enabled (1)', banner cannot be an emptry string. Enumeration: 'disabled': 2, 'enabled': 1.
           hpicfBannerExec 1.3.6.1.4.1.11.2.14.11.1.4.14.3 octet string read-write
An administratively configured exec banner message that is displayed in console, telnet, SSH and webUI sessions. Currently, the banner text can be configured upto 1300 characters.
           hpicfLastLoginBannerStatus 1.3.6.1.4.1.11.2.14.11.1.4.14.4 integer read-write
When the value of this object is 'enabled(1)', it means that the last-login banner is enabled. If authentication is enabled on the switch, the last-login banner is displayed after authentication in user interface sessions (console, Telnet, SSH, and web). When there is no authentication in the switch, the last-login banner is displayed before the switch prompt. Enumeration: 'disabled': 2, 'enabled': 1.
           hpicfBannerExec1 1.3.6.1.4.1.11.2.14.11.1.4.14.5 octet string read-write
An administratively configured exec banner message that is displayed in console, telnet, SSH and webUI sessions. Currently, the banner text can be configured upto 1300 characters. This can be of length 0 when its not configured.
     hpicfBasicDNSConfig 1.3.6.1.4.1.11.2.14.11.1.4.15
           hpicfDNSDefaultDomainSuffix 1.3.6.1.4.1.11.2.14.11.1.4.15.1 displaystring read-write
The default domain name. This has been deprecated as multiple domain suffixes are supported with hpicfDNSDomainSuffixTable. Read or Write on this object maps to the first domain suffix entry in hpicfDNSDomainSuffixTable.
           hpicfDNSNameServerTable 1.3.6.1.4.1.11.2.14.11.1.4.15.2 no-access
#### Deprecated #### A table that contains information about the (DNS) Name Server configuration in this device.
               hpicfDNSNameServerEntry 1.3.6.1.4.1.11.2.14.11.1.4.15.2.1 no-access
### deprecated ###Information about name server configuration entry on this resolver device.
                   hpicfDNSNameServerAddress 1.3.6.1.4.1.11.2.14.11.1.4.15.2.1.1 ipaddress no-access
### Deprecated ###IPv4 address of the given name server.
                   hpicfDNSNameServerEntryStatus 1.3.6.1.4.1.11.2.14.11.1.4.15.2.1.2 rowstatus read-only
### Deprecated ###The row status of a given name server entry.
           hpicfInetDNSNameServerTable 1.3.6.1.4.1.11.2.14.11.1.4.15.3 no-access
A table that contains information about the (DNS) Name Server configuration in this device.This table has 3 index's PRIORITY ADDRTYPE ADDR,for each pririoty only one address can be configured. An address can be created in this table only if the 'hpicfDNSConfigMode' is manual(2).
               hpicfInetDNSNameServerEntry 1.3.6.1.4.1.11.2.14.11.1.4.15.3.1 no-access
An entry in hpicfInetDNSNameServerEntry contains single manually configured DNS Address on this resolver device. This can be created only if the 'hpicfDNSConfigMode' is manual(2).
                   hpicfInetDNSNameServerAddrIndex 1.3.6.1.4.1.11.2.14.11.1.4.15.3.1.1 integer32 no-access
Index(which is also treated as priority) of DNS server address configured.
                   hpicfInetDNSNameServerAddrType 1.3.6.1.4.1.11.2.14.11.1.4.15.3.1.2 inetaddresstype no-access
Address Type of the DNS Name server stored in hpicfInetDNSNameServer Address.
                   hpicfInetDNSNameServerAddress 1.3.6.1.4.1.11.2.14.11.1.4.15.3.1.3 inetaddress no-access
Address of DNS and type of address stored is is mentioned in hpicfInetDNSNameServerAddType This field needs to be used in conjunction with hpicfInetDNSNameServerAddrType.
                   hpicfInetDNSNameServerEntryStatus 1.3.6.1.4.1.11.2.14.11.1.4.15.3.1.4 rowstatus read-only
The row status of a given name server entry.
                   hpicfInetDNSNameServerEntryIsOobm 1.3.6.1.4.1.11.2.14.11.1.4.15.3.1.5 truthvalue read-only
This object indicates whether this DNS Server is reachable over the OOBM (Out Of Band Management) interface or not. This MIB object will be applicable only if there is a physical OOBM port on the device.
           hpicfDNSDefaultDomainSuffixIsOobm 1.3.6.1.4.1.11.2.14.11.1.4.15.4 displaystring read-write
The default domain name (A unique designator on the network composed of symbols separated by dots) to which resolver appends host names before sending the queries to name servers on OOBM plane. An example of a valid default domain suffix is 'hp.com'. The resolver will not use a default domain suffix if this object is set to empty-string (which is the default value). This can be set only if the 'hpicfDNSConfigMode' is set to manual(2).
           hpicfDNSConfigMode 1.3.6.1.4.1.11.2.14.11.1.4.15.5 integer read-write
Setting this flag to 'dhcp' will cause the device to use DHCP to obtain its DNS configuration parameters (such as dns servers and domain name suffix). Setting this flag to 'manual' will allow manual DNS configuration. Setting this flag to 'disabled' will clear any existing DNS configuration. Enumeration: 'disabled': 3, 'dhcp': 1, 'manual': 2.
           hpicfCurDNSConfig 1.3.6.1.4.1.11.2.14.11.1.4.15.6
               hpicfCurDNSDefaultDomainSuffix 1.3.6.1.4.1.11.2.14.11.1.4.15.6.1 displaystring read-only
Currently configured default domain name. This has been deprecated as multiple domain names are now supported using hpicfDNSDomainSuffixTable. A read on this object returns the first domain suffix entry from hpicfDNSDomainSuffixTable.
               hpicfCurDNSNameServerTable 1.3.6.1.4.1.11.2.14.11.1.4.15.6.2 no-access
A table that contains information about the (DNS) Name Server configuration in this device.This table has hpicfCurDNSNameServerAddrIndex - priority of the DNS address, hpicfCurDNSNameServerAddrType - type of the address and finally hpicfCurDNSNameServerAddress - the DNS server address. For each pririoty only one address can be configured.
                   hpicfCurDNSNameServerEntry 1.3.6.1.4.1.11.2.14.11.1.4.15.6.2.1 no-access
An entry in hpicfCurDNSNameServerEntry contains single DHCP learnt DNS Address on this resolver device.
                       hpicfCurDNSNameServerAddrIndex 1.3.6.1.4.1.11.2.14.11.1.4.15.6.2.1.1 integer32 no-access
Index(which is also treated as priority) of DNS server address configured.
                       hpicfCurDNSNameServerAddrType 1.3.6.1.4.1.11.2.14.11.1.4.15.6.2.1.2 inetaddresstype no-access
Address Type of the DNS Name server stored in hpicfCurDNSNameServer Address.
                       hpicfCurDNSNameServerAddress 1.3.6.1.4.1.11.2.14.11.1.4.15.6.2.1.3 inetaddress no-access
Address of DNS and type of address stored is is mentioned in hpicfCurDNSNameServerAddType This field needs to be used in conjuction with hpicfCurDNSNameServerAddrType.
                       hpicfCurDNSNameServerEntryStatus 1.3.6.1.4.1.11.2.14.11.1.4.15.6.2.1.4 rowstatus read-only
The row status of a given name server entry.
           hpicfDNSDomainSuffixTable 1.3.6.1.4.1.11.2.14.11.1.4.15.7 no-access
Table of DNS Domain Suffixes. A DNS Domain Suffix (A unique designator on the network composed of symbols separated by dots) to which resolver appends host names before sending the queries to name servers. An example of a valid domain suffix is 'example.com'. This table contains either the manually configured domain suffixes or the DHCP provided domain suffixes, depending on the whether 'hpicfDNSConfigMode' is set to manual or dhcp respectively.
               hpicfDNSDomainSuffixEntry 1.3.6.1.4.1.11.2.14.11.1.4.15.7.1 no-access
A row in the DNS Domain Suffix table.
                   hpicfDNSDomainSuffixIndex 1.3.6.1.4.1.11.2.14.11.1.4.15.7.1.1 integer32 no-access
Index of the domain suffix entry in the configuration table. This index represents the priority of the domain suffix, as the resolver uses the suffixes in the same order as per the index.
                   hpicfDNSDomainSuffix 1.3.6.1.4.1.11.2.14.11.1.4.15.7.1.2 displaystring read-write
String representing the DNS Domain Suffix. A DNS Domain Suffix (A unique designator on the network composed of symbols separated by dots) to which resolver appends host names before sending the queries to name servers. An example of a valid domain suffix is 'example.com'. The resolver will not use a domain suffix that is set as empty-string (which is the default value). This can be set only if the 'hpicfDNSConfigMode'is manual(2). A read on this object always returns the current configuration details. If 'hpicfDNSConfigMode'is set to dhcp, it contains the domain names obtained through DHCP. If 'hpicfDNSConfigMode'is set to manual it contains the manually configured domain names.
     hpicfResetDefault 1.3.6.1.4.1.11.2.14.11.1.4.16 integer read-write
The switch boots from 'primary image' or 'secondary image' based on this object. Enumeration: 'primary': 1, 'secondary': 2.
     hpicfTelnet6Enable 1.3.6.1.4.1.11.2.14.11.1.4.17 integer read-write
********* THIS OBJECT IS DEPRECATED ********* When the value of this object is 'enabled(1)', the telnet6 server on this agent is running and allowed to accept connections. When the value of this object is 'disabled(2)', no incoming telnet6 connections will be accepted by this agent. Enumeration: 'disabled': 2, 'enabled': 1.
     hpicfBasicSNMPConfig 1.3.6.1.4.1.11.2.14.11.1.4.18
           hpSwitchSnmpViewConfig 1.3.6.1.4.1.11.2.14.11.1.4.18.1 integer read-write
Enable/Disable SNMP support for hpSwitchAuthentication MIB. When the MIB access is enabled, Manager read/write access to the MIB is permitted. Operator read/write access to the MIB is always denied. For security reasons, network administrators are encouraged to disable SNMPV2c before using the MIB. Enumeration: 'disabled': 2, 'enabled': 1.
           hpicfSnmpV2Enable 1.3.6.1.4.1.11.2.14.11.1.4.18.2 integer read-write
When the value of this object is 'enabled(1)', it means that SNMPv1/v2 is enabled on the system. When the value of this object is 'disabled(2)', it means that SNMPv1/v2 is disabled on the system. Enumeration: 'disabled': 2, 'enabled': 1.
           hpicfSwitchSnmpAllowUnsecuredAccessToMACsec 1.3.6.1.4.1.11.2.14.11.1.4.18.3 integer read-write
Enable unsecured access through SNMP for the hpicfMACsec MIB. When this object is disabled, access to the hpicfMACsec MIB is permitted only when SNMPv3 is used with authentication and privacy. When this object is enabled, access to the MIB is not restricted for SNMPv3 with privacy and access through SNMPv1, SNMPv2, and SNMPv3 is allowed. Access to this MIB object would further be controlled by the switch-wide settings for SNMP. Enumeration: 'disabled': 2, 'enabled': 1.
           hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy 1.3.6.1.4.1.11.2.14.11.1.4.18.4 integer read-write
Enable unsecured access through SNMP for the ieee8021SecY MIB. When this object is disabled, access to the ieee8021SecY MIB is permitted only when SNMPv3 is used with authentication and privacy. When this object is enabled, access to the MIB is not restricted for SNMPv3 with privacy and access through SNMPv1, SNMPv2, and SNMPv3 is allowed. Access to this MIB object would further be controlled by the switch-wide settings for SNMP. Enumeration: 'disabled': 2, 'enabled': 1.
     hpicfBasicConfig 1.3.6.1.4.1.11.2.14.11.1.4.19
           hpicfDisplayLogNumbers 1.3.6.1.4.1.11.2.14.11.1.4.19.1 truthvalue read-write
When this object is set to True, Log event numbers will be displayed when log is displayed via the CLI or via the MENU. Log event numbers will not be displayed when this object is set to False.
           hpicfIncludeCredentials 1.3.6.1.4.1.11.2.14.11.1.4.19.2 integer read-write
This object: enabled - Include password and credentials in the switch configuration. disabled - Do not include credentials in the switch configuration. radiusTacasOnly - Enable only the RADIUS and TACACS+ server keys in the switch configuration. NOTE: This will insert possibly sensitive information in switch configuration files, and as a part of some CLI commands output. It is strongly recommended that you use SFTP rather than TFTP for transfer of the configuration over the network, and that you use the web configuration interface only with SSL enabled. Enumeration: 'disabled': 2, 'radiusTacacsOnly': 3, 'enabled': 1.
     hpicfBasicLogFilters 1.3.6.1.4.1.11.2.14.11.1.4.23
           hpicfBasicLogFiltersTable 1.3.6.1.4.1.11.2.14.11.1.4.23.1 no-access
Table of log filters. A log filter can be constructed from multiple sub-filters, each specifying matching criteria and the action for the match. Multiple filters can be created, current maximum limit is 10. Only one filter can be enabled at a time. Each entry in this table must have associated entries in 'hpicfBasicLogSubFiltersTable'.
               hpicfBasicLogFiltersEntry 1.3.6.1.4.1.11.2.14.11.1.4.23.1.1 no-access
Entry containing information about log filter.
                   hpicfBasicLogFilterName 1.3.6.1.4.1.11.2.14.11.1.4.23.1.1.1 snmpadminstring no-access
Name of the log filter. A case sensitive string of printable ASCII characters that uniquely identifies this log filter. The current maximum limit is 16 characters.
                   hpicfBasicLogFilterEnable 1.3.6.1.4.1.11.2.14.11.1.4.23.1.1.2 integer read-only
Enables/disables log filter. When the value of this object is 'enabled(1)' every event message will be passed to this filter for examination, and either accepted or rejected. Only one filter can be enabled at a time. Filter modules can be dynamically replaced, newly enabled filter automatically disables the previous one. Enumeration: 'disabled': 2, 'enabled': 1.
                   hpicfBasicLogFilterDropCounter 1.3.6.1.4.1.11.2.14.11.1.4.23.1.1.3 counter32 read-only
Number of event messages that were denied to log due to filtering criteria set in this filter and silently dropped. Represents filtering effect of the filter on event logging process.
                   hpicfBasicLogFilterRowStatus 1.3.6.1.4.1.11.2.14.11.1.4.23.1.1.4 rowstatus read-only
Status of the row in hpicfBasicLogFiltersTable. Once row in this table is created its status will be 'active' and cannot be changed. The row will be deleted if row status is set to 'destroy'.
           hpicfBasicLogSubFiltersTable 1.3.6.1.4.1.11.2.14.11.1.4.23.2 no-access
Sub-filters in the log filter module. A sub-filter can be one of the following types: - severity - event number - regular expression Each sub-filter entry consists of: - sequence number - matching criteria (severity or event number or regular expression) - action for the match. A default sub-filter with a sequence number of 99 is always created in the sub-filters table and has '.*' as the matching criteria. Matching criteria and action can be modified for all sub-filters except for the default sub-filter which only supports modification of action. To change the sequence number of sub-filter it should be deleted and recreated with a new sequence number. Multiple sub-filters can be added to the filter module, current limit is 20. Sub-filters in the filter module can be same or different types. Entries in this table are associated with parent entries in 'hpicfBasicLogFiltersTable'. When parent entry in the 'hpicfBasicLogFiltersTable' is created or deleted the corresponding entries in this table will be also created or deleted.
               hpicfBasicLogSubFilterEntry 1.3.6.1.4.1.11.2.14.11.1.4.23.2.1 no-access
Entry containing information about sub-filter.
                   hpicfBasicLogSubFilterSeqNum 1.3.6.1.4.1.11.2.14.11.1.4.23.2.1.1 integer32 no-access
Sequence number for the sub-filter in the filter module. Sub-filters in the filter module are executed in the order, starting from lowest sequence number to the highest. As soon as match is found the action is executed and no further matching is done.
                   hpicfBasicLogSubFilterType 1.3.6.1.4.1.11.2.14.11.1.4.23.2.1.2 integer read-only
Sub-filter type. If type is 'severity' then the value of 'hpicfBasicLogSubFilterSeverity' object is used as matching criteria. If type is 'eventNum' then the value of 'hpicfBasicLogSubFilterEventNum' object is used as matching criteria. If type is 'regExp' then the value of 'hpicfBasicLogSubFilterRegExp' object is used as matching criteria. Enumeration: 'eventNum': 2, 'regExp': 3, 'severity': 1.
                   hpicfBasicLogSubFilterSeverity 1.3.6.1.4.1.11.2.14.11.1.4.23.2.1.3 integer read-only
Severity level sub-filter type. Contains severity levels as matching criteria. Enumeration: 'warn': 2, 'info': 3, 'fatal': 1, 'debug': 4, 'standard': 5.
                   hpicfBasicLogSubFilterEventNum 1.3.6.1.4.1.11.2.14.11.1.4.23.2.1.4 integer32 read-only
Event number sub-filter type. Contains event number as matching criteria. The value used in this object represents an 'eventIndex' as defined in RMON-MIB.
                   hpicfBasicLogSubFilterRegExp 1.3.6.1.4.1.11.2.14.11.1.4.23.2.1.5 snmpadminstring read-only
Regular Expression sub-filter type. String containing a regular expression as matching criteria.
                   hpicfBasicLogSubFilterAction 1.3.6.1.4.1.11.2.14.11.1.4.23.2.1.6 integer read-only
Action type defined for sub-filter. Enumeration: 'deny': 1, 'permit': 2.
                   hpicfBasicLogSubFilterMatchCounter 1.3.6.1.4.1.11.2.14.11.1.4.23.2.1.7 counter32 read-only
Number of event messages that matched to criteria set in this sub-filter, and were denied or permitted to log. Represents summary effect contributed by this sub-filter.
                   hpicfBasicLogSubFilterRowStatus 1.3.6.1.4.1.11.2.14.11.1.4.23.2.1.8 rowstatus read-only
Status of the row in hpicfBasicLogSubFiltersTable. Following objects are mandatory for the row to exist - hpicfBasicLogSubFilterSeqNum - hpicfBasicLogSubFilterType - hpicfBasicLogSubFilterSeverity or hpicfBasicLogSubFilterEventNum or hpicfBasicLogSubFilterRegExp - hpicfBasicLogSubFilterAction Each row in this table is associated with the row in 'hpicfBasicLogFiltersTable' and can be created or deleted only when corresponding row in the 'hpicfBasicLogFiltersTable' is created or deleted. Once row in this table is created its status will be 'active' and cannot be changed.
           hpicfBasicLogFiltersClearCounters 1.3.6.1.4.1.11.2.14.11.1.4.23.3 snmpadminstring read-write
When the value of this object is set, the counters associated with the specified filter name will be cleared. If the specified filter name is 'all', the counters associated with all filters will have their counters cleared. A get request for this object always returns an empty string.
           hpicfBasicLogPerIpFiltersTable 1.3.6.1.4.1.11.2.14.11.1.4.23.4 no-access
Per-filters in the log filter module. A sub-filter can be one of the following types: - severity - event number - regular expression - action for the match. Entries in this table are associated with parent entries in 'hpicfBasicLogFiltersTable'. When parent entry in the 'hpicfBasicLogFiltersTable' is created or deleted the corresponding entries in this table will be also created or deleted.
               hpicfBasicLogPerIpFilterEntry 1.3.6.1.4.1.11.2.14.11.1.4.23.4.1 no-access
Entry containing information about per IP filter.
                   hpicfBasicLogPerIpIndex 1.3.6.1.4.1.11.2.14.11.1.4.23.4.1.1 unsigned32 no-access
The index value which uniquely identifies a row in the Per IP filter table.
                   hpicfBasicLogPerIpFilterType 1.3.6.1.4.1.11.2.14.11.1.4.23.4.1.2 integer read-only
Per IP filter type. Enumeration: 'eventNum': 2, 'sysMod': 3, 'severity': 1.
                   hpicfBasicLogPerIpFilterSeverity 1.3.6.1.4.1.11.2.14.11.1.4.23.4.1.3 integer read-only
Severity level of Per IP filter. Contains severity levels as matching criteria. Enumeration: 'warn': 2, 'info': 3, 'fatal': 1, 'debug': 4, 'standard': 5.
                   hpicfBasicLogPerIpFilterEventList 1.3.6.1.4.1.11.2.14.11.1.4.23.4.1.4 octet string read-only
Event List of Per Ip filter. Each octet within this value specifies a set of eight Events, with the first octet specifying Events 1 through 8, the second octet specifying Events 9 through 16 etc. Within each octet, the most significant bit represents the lowest numbered Event, and the least significant bit represents the highest Event. Thus, each Event is represented by a single bit within the value of this object. If that bit has a value of 1 then that Event is included in the set of Events; the Event is not included if its bit has a value of 0.
                   hpicfBasicLogPerIpFilterAction 1.3.6.1.4.1.11.2.14.11.1.4.23.4.1.5 integer read-only
Action type defined for Event list. Enumeration: 'deny': 1, 'permit': 2.
                   hpicfBasicLogPerIpFilterSysModule 1.3.6.1.4.1.11.2.14.11.1.4.23.4.1.6 octet string read-only
A system module value used for the filter entry. Each octet within this value specifies a set of eight System Modules, with the first octet specifying System module 1 through 8, the second octet specifying System Module 9 through 16 etc. Within each octet, the most significant bit represents the lowest numbered System Module, and the least significant bit represents the highest System Module. Thus, each System Module is represented by a single bit within the value of this object. If that bit has a value of 1 then that System Module is included in the set of System Modules; the System Module is not included if its bit has a value of 0.
                   hpicfBasicLogPerIpFilterRowStatus 1.3.6.1.4.1.11.2.14.11.1.4.23.4.1.7 rowstatus read-only
Status of the row in hpicfBasicLogPerIpFiltersTable. Each row in this table is associated with the row in 'hpicfBasicLogFiltersTable' and can be created or deleted only when corresponding row in the 'hpicfBasicLogFiltersTable' is created or deleted. Once row in this table is created its status will be 'active' and cannot be changed.
     hpicfBasicWebMgmtObjects 1.3.6.1.4.1.11.2.14.11.1.4.24
           hpicfBasicWebAgentIdleTime 1.3.6.1.4.1.11.2.14.11.1.4.24.1 integer32 read-write
This object specifies the time period after which session timeout occurs, if no input is provided by the user. The default value is 600 seconds. The exact range of valid values for this object is implementation dependent; consult the product documentation to determine the supported range for a specific product.
           hpicfBasicWebAgentInterface 1.3.6.1.4.1.11.2.14.11.1.4.24.2 integer read-write
The web management user interface style. Enumeration: 'traditional': 1, 'improved': 2.
     hpicfSelfTestTrap 1.3.6.1.4.1.11.2.14.12.1.0.4
An hpicfSelfTestTrap indicates that the agent has detected a non-critical failure. The value of the hpicfSelfTestResultText object describing the failure is sent in the trap. Note that this trap is sent whenever a new failure is detected. An agent should throttle the generation of consecutive hpicfSelfTestTraps so that there is at least a five-second gap between traps of this type. When traps are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a trap means sending to all configured recipients.).