HM2-WWAN-MIB: View SNMP OID List / Download MIB

VENDOR: RICHARD HIRSCHMANN


 Home MIB: HM2-WWAN-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, HM2-TC-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hm2WwanMib 1.3.6.1.4.1.248.11.125
This MIB defines the SNMP interface for Hirschmann WWAN implementation.
         hm2WwanMibNotifications 1.3.6.1.4.1.248.11.125.0
             hm2WwanRoamingActiveTrap 1.3.6.1.4.1.248.11.125.0.1
Notification generated whenever Roaming status will become active.
             hm2WwanLtePersistenceSwitchTrap 1.3.6.1.4.1.248.11.125.0.2
Notification generated when LTE Persistence function will perform a switch back to LTE.
             hm2WwanCelluarRegistrationFailedTrap 1.3.6.1.4.1.248.11.125.0.3
Notification generated whenever a Cellular Network Registration failure occurs.
             hm2WwanDataConnectionSetupTrap 1.3.6.1.4.1.248.11.125.0.4
Notification generated whenever a Cellular Data Connection will change its status.
             hm2WwanDataPlanWarningThresholdTrap 1.3.6.1.4.1.248.11.125.0.5
Notification generated when the Data Plan Warning Threshold is reached. The trap is resent after each 25% of remaining data is consumed all the way up until the Data Plan Limit is reached.
             hm2WwanSimCardPin1StatusTrap 1.3.6.1.4.1.248.11.125.0.6
Notification generated whenever SIM Card PIN1 access functions are used and their status changes.
             hm2WwanBackupSimFailoverConnectionTrap 1.3.6.1.4.1.248.11.125.0.7
Notification generated whenever a data connection on the Primary SIM Card fails and a failover to Backup SIM Card is done.
             hm2WwanBackupSimFailoverRegistrationTrap 1.3.6.1.4.1.248.11.125.0.8
Notification generated whenever a cellular network registration the Primary SIM Card fails and a failover to Backup SIM Card is done.
             hm2WwanBackupSimFailoverRoamingTrap 1.3.6.1.4.1.248.11.125.0.9
Notification generated whenever a cellular network registration to a Roaming Carrier is detected on the Primary SIM Card and as a result a failover to the Backup SIM Card is done.
             hm2WwanBackupSimFailoverDataLimitTrap 1.3.6.1.4.1.248.11.125.0.10
Notification generated when the current Data Plan Limit is reached and a failover to the Backup SIM Card is done.
             hm2WwanModemResetFailoverRegistrationTrap 1.3.6.1.4.1.248.11.125.0.11
Notification generated when cellular network registration fails on the Primary SIM Card and also the fallback to Backup SIM Card registration fails.
         hm2WwanMibObjects 1.3.6.1.4.1.248.11.125.1
             hm2WwanGeneralGroup 1.3.6.1.4.1.248.11.125.1.1
                 hm2WwanAdminStatus 1.3.6.1.4.1.248.11.125.1.1.1 hmenabledstatus read-write
WWAN Global mode operation change.
                 hm2WwanCellularSelection 1.3.6.1.4.1.248.11.125.1.1.2 hm2cellularnetworks read-write
Cellular network selection supported combinations. 'auto' value means all supported networks (GSM/UMTS/LTE).
                 hm2WwanLtePersistence 1.3.6.1.4.1.248.11.125.1.1.4 hmenabledstatus read-write
When an LTE capable device is connected to a non-LTE network it may not handover to an LTE network when one becomes available if data is being continuously transmitted or received. Enabling this function will insure that a connection over LTE will be maintained whenever LTE is available.
                 hm2WwanLtePersistenceInterval 1.3.6.1.4.1.248.11.125.1.1.5 integer32 read-write
The number of seconds after which LTE Persistence switch will be attempted. A 0 value means switch without waiting. This time interval is needed to avoid intermittent switches.
                 hm2WwanFailoverTechnologyLevel 1.3.6.1.4.1.248.11.125.1.1.6 hm2technologylevel read-write
Desired cellular technology limit. If the current cellular network technology falls below this level then failover can be triggered. This mib node is meant to be used in conjunction with hm2WwanBackupSimTechnologyLevel failover scenario.
                 hm2WwanBackupSimFailoverConnection 1.3.6.1.4.1.248.11.125.1.1.7 hmenabledstatus read-write
Switch to Backup SIM card when data connection fails.
                 hm2WwanBackupSimFailoverRegistration 1.3.6.1.4.1.248.11.125.1.1.8 hmenabledstatus read-write
Switch to Backup SIM when registration fails.
                 hm2WwanBackupSimFailoverRoaming 1.3.6.1.4.1.248.11.125.1.1.9 hmenabledstatus read-write
Switch to Backup SIM when roaming is detected.
                 hm2WwanBackupSimFailoverDataLimit 1.3.6.1.4.1.248.11.125.1.1.10 hmenabledstatus read-write
Switch to Backup SIM card when data limit is reached and switch to Primary SIM when data limit is recovered.
                 hm2WwanModemResetFailoverRegistration 1.3.6.1.4.1.248.11.125.1.1.11 hmenabledstatus read-write
Attempt a Modem reset if both Primary and Backup SIM cards report registration failures. Backup SIM card registration failure might not be needed depending if hm2WwanBackupSimFailoverRegistration is enabled or if the SIM is physical present.
                 hm2WwanBackupSimTechnologyLevel 1.3.6.1.4.1.248.11.125.1.1.12 hmenabledstatus read-write
Switch to Backup SIM card when current cellular technology drops bellow a limit. Configure limit with hm2WwanFailoverTechnologyLevel.
                 hm2WwanFailoverCycle 1.3.6.1.4.1.248.11.125.1.1.13 hmenabledstatus read-write
By default hm2WwanBackupSimFailoverConnection hm2WwanBackupSimFailoverRegistration will not fallback to using the Primary SIM card if failure is encountered on the Backup SIM card. This mib node will allow falling back to Primary SIM card if Backup SIM card is unable to register or create a connection. The cycled fallback will be done after 60 seconds.
                 hm2WwanSetTrap 1.3.6.1.4.1.248.11.125.1.1.14 hm2trapbits read-write
A bitmap string serving as a enable/disable method for the trap events defined by the WWAN notifications. All traps are enabled by default.
             hm2WwanDataGroup 1.3.6.1.4.1.248.11.125.1.2
                 hm2WwanDataConnectionTable 1.3.6.1.4.1.248.11.125.1.2.1 no-access
This table contains configuration options for each WWAN Data connection per SIM card.
                     hm2WwanDataConnectionEntry 1.3.6.1.4.1.248.11.125.1.2.1.1 no-access
The entries of the table.
                         hm2WwanDataConnectionSimId 1.3.6.1.4.1.248.11.125.1.2.1.1.1 integer32 no-access
SIM ID for which this connection entry belongs to. Also used as the table's index.
                         hm2WwanDataConnectionAdminStatus 1.3.6.1.4.1.248.11.125.1.2.1.1.2 hmenabledstatus read-write
Operational mode of the connection.
                         hm2WwanDataConnectionApn 1.3.6.1.4.1.248.11.125.1.2.1.1.3 snmpadminstring read-write
Access Point Name used to identify the data connection's gateway name in the carriers network. If empty then the default APN configured on the SIM card will be used.
                         hm2WwanDataConnectionApnCurrent 1.3.6.1.4.1.248.11.125.1.2.1.1.4 snmpadminstring read-only
Current Access Point Name used for data connections. If hm2WwanDataConnectionApn is empty then the value shown here represents the automatically detected APN stored on the Sim Card.
                         hm2WwanDataConnectionUser 1.3.6.1.4.1.248.11.125.1.2.1.1.5 snmpadminstring read-write
User name used for authentication when settting up a new data connection. Empty value means its not required.
                         hm2WwanDataConnectionPassword 1.3.6.1.4.1.248.11.125.1.2.1.1.6 snmpadminstring read-write
Pasword asociated with the user name used for authentication when settting up a new data connection. Not readable by the user.
                         hm2WwanDataConnectionAuth 1.3.6.1.4.1.248.11.125.1.2.1.1.7 hm2authtype read-write
The type of authentication used when setting up a data connection.
                         hm2WwanDataConnectionPdpType 1.3.6.1.4.1.248.11.125.1.2.1.1.8 hm2pdptype read-write
The IP type of the data connection to set up. It can be IPv4 or IPv6. Currently only IPv4 is supported.
                         hm2WwanDataConnectionIpAddressType 1.3.6.1.4.1.248.11.125.1.2.1.1.9 inetaddresstype read-write
hm2WwanDataConnectionIpAddress value type, either IPv4 or IPv6.
                         hm2WwanDataConnectionIpAddress 1.3.6.1.4.1.248.11.125.1.2.1.1.10 inetaddress read-write
Manual IP address to be used for configuring a new data connection. If 0.0.0.0 then a dynamic IP Address will be assigned by the carrier.
                         hm2WwanDataConnectionDnsPrimaryType 1.3.6.1.4.1.248.11.125.1.2.1.1.11 inetaddresstype read-write
hm2WwanDataConnectionDnsPrimary value type, either IPv4 or IPv6.
                         hm2WwanDataConnectionDnsPrimary 1.3.6.1.4.1.248.11.125.1.2.1.1.12 inetaddress read-write
Manual IP address to be used for configuring the primary DNS server address for the data connection. If 0.0.0.0 then a dynamic DNS IP Address will be assigned by the carrier.
                         hm2WwanDataConnectionDnsSecondaryType 1.3.6.1.4.1.248.11.125.1.2.1.1.13 inetaddresstype read-write
hm2WwanDataConnectionDnsSecondary value type, either IPv4 or IPv6.
                         hm2WwanDataConnectionDnsSecondary 1.3.6.1.4.1.248.11.125.1.2.1.1.14 inetaddress read-write
Manual IP address to be used for configuring the secondary DNS server address for the data connection. If 0.0.0.0 then a dynamic DNS IP Address will be assigned by the carrier.
                         hm2WwanDataConnectionIpAddressCurrentType 1.3.6.1.4.1.248.11.125.1.2.1.1.15 inetaddresstype read-only
hm2WwanDataConnectionIpAddressCurrent value type, either IPv4 or IPv6.
                         hm2WwanDataConnectionIpAddressCurrent 1.3.6.1.4.1.248.11.125.1.2.1.1.16 inetaddress read-only
The IP Address that the WWAN data interface is currently using.
                         hm2WwanDataConnectionDnsPrimaryCurrentType 1.3.6.1.4.1.248.11.125.1.2.1.1.17 inetaddresstype read-only
hm2WwanDataConnectionDnsPrimaryCurrent value type, either IPv4 or IPv6.
                         hm2WwanDataConnectionDnsPrimaryCurrent 1.3.6.1.4.1.248.11.125.1.2.1.1.18 inetaddress read-only
The Primary DNS Address that the WWAN data interface is currently using.
                         hm2WwanDataConnectionDnsSecondaryCurrentType 1.3.6.1.4.1.248.11.125.1.2.1.1.19 inetaddresstype read-only
hm2WwanDataConnectionDnsSecondaryCurrent value type, either IPv4 or IPv6.
                         hm2WwanDataConnectionDnsSecondaryCurrent 1.3.6.1.4.1.248.11.125.1.2.1.1.20 inetaddress read-only
The Secondary DNS Address that the WWAN data interface is currently using.
                         hm2WwanDataConnectionMtu 1.3.6.1.4.1.248.11.125.1.2.1.1.21 integer32 read-write
Maximum Transmision Unit used when sending IP packets over the WWAN data interface.
                         hm2WwanDataConnectionFailedRetry 1.3.6.1.4.1.248.11.125.1.2.1.1.22 integer32 read-write
How many times should a failed WWAN data connection attempt to try reconnecting before aborting and using fallback options or logging error. A value of 0 means no retry attempts and a value of -1 means 'infinite' attempts.
                         hm2WwanDataConnectionFailedRetryCurrent 1.3.6.1.4.1.248.11.125.1.2.1.1.23 integer32 read-only
The current number o data reconnect attempts made. Can only be lower or equal to hm2WwanDataConnectionFailedRetry. Value 0 means no retries have been made.
                         hm2WwanDataConnectionStatus 1.3.6.1.4.1.248.11.125.1.2.1.1.24 hm2connectionstatus read-only
Current status of this WWAN Data connection. If in 'Error' state then a reason for the error will be found under hm2WwanDataConnectionStatusErrorReason.
                         hm2WwanDataConnectionStatusErrorReason 1.3.6.1.4.1.248.11.125.1.2.1.1.25 hmlargedisplaystring read-only
The reason why this WWAN Data connection is in 'Error' state.
                         hm2WwanDataConnectionActivatedCount 1.3.6.1.4.1.248.11.125.1.2.1.1.26 unsigned32 read-only
How many times this WWAN Data connection was successfuly established.
                         hm2WwanDataConnectionStartTime 1.3.6.1.4.1.248.11.125.1.2.1.1.27 unsigned32 read-only
Time in seconds since Jan 1, 1970.
                         hm2WwanDataConnectionUpTime 1.3.6.1.4.1.248.11.125.1.2.1.1.28 unsigned32 read-only
Time in seconds since this connection is active.
                         hm2WwanDataConnectionTotalUpTime 1.3.6.1.4.1.248.11.125.1.2.1.1.29 unsigned32 read-only
Total time in which this connection was active.
                 hm2WwanDataPlanTable 1.3.6.1.4.1.248.11.125.1.2.2 no-access
This table contains configuration options for each WWAN Data Plan per SIM card.
                     hm2WwanDataPlanEntry 1.3.6.1.4.1.248.11.125.1.2.2.1 no-access
The entries of the table.
                         hm2WwanDataPlanSimId 1.3.6.1.4.1.248.11.125.1.2.2.1.1 integer32 no-access
SIM ID for which this connection entry belongs. Also used as the table's index.
                         hm2WwanDataPlanMonthlyLimit 1.3.6.1.4.1.248.11.125.1.2.2.1.2 unsigned32 read-write
The amount of data that the carrier will charge as per a WWAN data contract per month. A value 0 means unlimited.
                         hm2WwanDataPlanLimitMeasureUnit 1.3.6.1.4.1.248.11.125.1.2.2.1.3 hm2limitunit read-write
Which measure unit is used to interpret the volume of the data traffic. Possible units are: Kilobytes, Megabytes, Gigabytes.
                         hm2WwanDataPlanWarningThreshold 1.3.6.1.4.1.248.11.125.1.2.2.1.4 integer32 read-write
The percentage of the volume of data that when reached will generate a warning. A value of 0 will disable the warning.
                         hm2WwanDataPlanReset 1.3.6.1.4.1.248.11.125.1.2.2.1.5 hmactionvalue read-write
Manually reset the data plan counters. Only the value 'action(2)' can be written and when read 'noop(1)' will always be returned.
                         hm2WwanDataPlanResetDay 1.3.6.1.4.1.248.11.125.1.2.2.1.6 integer32 read-write
Which day of the month will be used to auto reset the data plan counters. A value of 0 will disable the reset action. The reset action will be performed at 00:00am in the selected day.
                         hm2WwanDataPlanLastReset 1.3.6.1.4.1.248.11.125.1.2.2.1.7 hmtimeseconds1970 read-only
Time in seconds since Jan 1st, 1970 when the last data plan counters were resetted.
                         hm2WwanDataPlanCutoffThreshold 1.3.6.1.4.1.248.11.125.1.2.2.1.8 integer32 read-write
The percentage of the volume of used data that when reached will completely disable any data connections associated with this SIM ID. A value of 0 will disable the cutoff.
                         hm2WwanDataPlanMonthlyUsageTx 1.3.6.1.4.1.248.11.125.1.2.2.1.9 counter64 read-only
The amount of data that was transmitted since last reset. The measure unit is the same as hm2WwanDataPlanLimitMeasureUnit.
                         hm2WwanDataPlanMonthlyUsageRx 1.3.6.1.4.1.248.11.125.1.2.2.1.10 counter64 read-only
The amount of data that was received since last reset. The measure unit is the same as hm2WwanDataPlanLimitMeasureUnit.
                 hm2WwanDataPacketStatsTable 1.3.6.1.4.1.248.11.125.1.2.3 no-access
This table contains packet statistics for each WWAN Data connection per SIM card.
                     hm2WwanDataPacketStatsEntry 1.3.6.1.4.1.248.11.125.1.2.3.1 no-access
The entries of the table.
                         hm2WwanDataPacketStatsSimId 1.3.6.1.4.1.248.11.125.1.2.3.1.1 integer32 no-access
SIM ID for which this data connection packet statistics entry belongs to. Also used as the table's index.
                         hm2WwanDataPacketStatsTxOk 1.3.6.1.4.1.248.11.125.1.2.3.1.2 counter64 read-only
The number of successfully transmitted data packets.
                         hm2WwanDataPacketStatsRxOk 1.3.6.1.4.1.248.11.125.1.2.3.1.3 counter64 read-only
The number of successfully received data packets.
                         hm2WwanDataPacketStatsTxErrors 1.3.6.1.4.1.248.11.125.1.2.3.1.4 counter64 read-only
The number of errors encountered during packet transmission.
                         hm2WwanDataPacketStatsRxErrors 1.3.6.1.4.1.248.11.125.1.2.3.1.5 counter64 read-only
The number of errors encountered during packet reception.
                         hm2WwanDataPacketStatsTxOverflows 1.3.6.1.4.1.248.11.125.1.2.3.1.6 counter64 read-only
The number of overflows encountered during packet transmission.
                         hm2WwanDataPacketStatsRxOverflows 1.3.6.1.4.1.248.11.125.1.2.3.1.7 counter64 read-only
The number of overflows encountered during packet reception.
                         hm2WwanDataPacketStatsTxBytesOk 1.3.6.1.4.1.248.11.125.1.2.3.1.8 counter64 read-only
The number of successfully transmitted bytes.
                         hm2WwanDataPacketStatsRxBytesOk 1.3.6.1.4.1.248.11.125.1.2.3.1.9 counter64 read-only
The number of successfully received bytes.
                         hm2WwanDataPacketStatsTxDropped 1.3.6.1.4.1.248.11.125.1.2.3.1.10 counter64 read-only
The number of packets dropped during transmission.
                         hm2WwanDataPacketStatsRxDropped 1.3.6.1.4.1.248.11.125.1.2.3.1.11 counter64 read-only
The number of packets dropped during reception.
             hm2WwanSimCardGroup 1.3.6.1.4.1.248.11.125.1.3
                 hm2WwanSimCardTable 1.3.6.1.4.1.248.11.125.1.3.1 no-access
This table contains configuration options for each WWAN SIM card.
                     hm2WwanSimCardEntry 1.3.6.1.4.1.248.11.125.1.3.1.1 no-access
The entries of the table.
                         hm2WwanSimCardSimId 1.3.6.1.4.1.248.11.125.1.3.1.1.1 integer32 no-access
SIM ID for which this connection entry belongs. Also used as the table's index.
                         hm2WwanSimCardAdminStatus 1.3.6.1.4.1.248.11.125.1.3.1.1.2 hmenabledstatus read-write
Sim Card enable/disable function.
                         hm2WwanSimCardRole 1.3.6.1.4.1.248.11.125.1.3.1.1.3 hm2simcardrole read-write
The role this Sim Card will be assigned. The role is important for failover scenarios configured under General Configuration Group. 'auto' setting will automatically choose a role.
                         hm2WwanSimCardRoleCurrent 1.3.6.1.4.1.248.11.125.1.3.1.1.4 hm2simcardrole read-only
The role this Sim Card is currently using.
                         hm2WwanSimCardStatus 1.3.6.1.4.1.248.11.125.1.3.1.1.5 hm2simcardstatus read-only
Sim Card Status information: * simPresent: the SIM is physicaly present. * simAbsent: the SIM is physicaly absent. * simLocked: the SIM is physicaly present but was not unlocked using PIN1. * simUnlocked: the SIM is physicaly present and it was unlocked unsing PIN1. * simInactive: the sim is physicaly present but it is not used for data connections. * simActive: the sim is physicaly present and is used for data connections.
                         hm2WwanSimCardSetActive 1.3.6.1.4.1.248.11.125.1.3.1.1.6 hmactionvalue read-write
Manual operation to set the active status of this sim card. When in active state this sim card will be used for establishing data connections.
                         hm2WwanSimCardPin1 1.3.6.1.4.1.248.11.125.1.3.1.1.7 snmpadminstring read-write
Sim Card's PIN1 code. PIN1 is used to unlock main Sim functions which will allow Network Carrier Registration.
                         hm2WwanSimCardPin1Mode 1.3.6.1.4.1.248.11.125.1.3.1.1.8 hmenabledstatus read-write
Allows to enable or disable PIN1 code. With PIN1 disabled the Sim Card will automatically unlock all it's functions.
                         hm2WwanSimCardPin1Status 1.3.6.1.4.1.248.11.125.1.3.1.1.9 hm2pin1status read-only
Pin1 status information: * NotVerified: Pin1 was not verified. * Verified: Pin1 was successfuly verified. * Blocked: Wrong Pin1 was used too many times and the Sim Card blocked it. * Disabled: Pin1 was manually disabled or the Sim Card does not requires it. * WrongCode: The configured Pin1 code is not accepted by the Sim Card unlock function.
                         hm2WwanSimCardPin1VerifyTries 1.3.6.1.4.1.248.11.125.1.3.1.1.10 integer32 read-only
The amount of times a wrong Pin1 code can be used to unlock the Sim Card until it is blocked.
                         hm2WwanSimCardPin1UnblockTries 1.3.6.1.4.1.248.11.125.1.3.1.1.11 integer32 read-only
The amount of times a wrong PUK1 code can be entered to unblock a PIN1 code.
                         hm2WwanSimCardPuk1 1.3.6.1.4.1.248.11.125.1.3.1.1.12 snmpadminstring read-write
PUK1 code is used to unblock a PIN1 code. Writing a PUK1 value will attempt to unblock a PIN1 code if the PIN1 code is in 'Blocked' state. PUK1 code will not be saved. hm2WwanSimCardPin1UnblockTries is a counter on how many times a wrong PUK1 code can be entered. Empty value write operation will be ignored. New PIN code configured during the unblock operation will be the current PIN1 stored in hm2WwanSimCardPin1 mib.
                         hm2WwanSimCardRoamingMode 1.3.6.1.4.1.248.11.125.1.3.1.1.13 hmenabledstatus read-write
Roaming will allow the modem to perform registration with carriers other than the one that emitted the current SIM card. Data connections established when attached to Roaming partners will probably incur additional costs.
                         hm2WwanSimCardIccid 1.3.6.1.4.1.248.11.125.1.3.1.1.14 snmpadminstring read-write
Integrated Circuit Card Identifier is the international SIM's identifier. This value is preserved over reboots so that when a new SIM is inserted the operation can be detected and the settings relevant for the old SIM can be resetted. The user can only read this mib value.
                         hm2WwanSimCardImsi 1.3.6.1.4.1.248.11.125.1.3.1.1.15 snmpadminstring read-only
International Mobile Subscriber Identity is an individual identifier on operator networks. Mobile network operators connect mobile phone calls and communicate with their market SIM cards using their IMSIs.
             hm2WwanInformationGroup 1.3.6.1.4.1.248.11.125.1.4
                 hm2WwanCellularInformationGroup 1.3.6.1.4.1.248.11.125.1.4.1
                     hm2WwanCellularActiveSimId 1.3.6.1.4.1.248.11.125.1.4.1.1 integer32 read-only
The Sim Card id for the current active SIM.
                     hm2WwanCellularRegistration 1.3.6.1.4.1.248.11.125.1.4.1.2 hm2registrationstatus read-only
The current status of the Sim's Carrier Registration.
                     hm2WwanCellularOperator 1.3.6.1.4.1.248.11.125.1.4.1.3 snmpadminstring read-only
Network Operator Name
                     hm2WwanCellularNetwork 1.3.6.1.4.1.248.11.125.1.4.1.4 hm2cellularnetworks read-only
Current Cellular Network Technology being used.
                     hm2WwanCellularMcc 1.3.6.1.4.1.248.11.125.1.4.1.5 integer32 read-only
Mobile Country Code is a 3 digits code used to identify the country where the Public Land Mobile Network (PLMN) resides.
                     hm2WwanCellularMnc 1.3.6.1.4.1.248.11.125.1.4.1.6 integer32 read-only
Mobile Network Code is a 2 to 3 digits code used to identify the Public Land Mobile Network (PLMN) in that country.
                     hm2WwanCellularLac 1.3.6.1.4.1.248.11.125.1.4.1.7 integer32 read-only
Location area code together with PLMN (MCC + MNC) creates an internationally unique identifier known as Location Area Identity (LAI). The LAI is used for location updating of the mobile subscribers.
                     hm2WwanCellularBsic 1.3.6.1.4.1.248.11.125.1.4.1.8 integer32 read-only
Base Station Identity Code is a code used in WWAN networks to uniquely identify a base station.
                     hm2WwanCellularCellId 1.3.6.1.4.1.248.11.125.1.4.1.9 integer32 read-only
The identifier of the current used WWAN Cell.
                     hm2WwanCellularBand 1.3.6.1.4.1.248.11.125.1.4.1.10 integer32 read-only
The current Cellular Band used for radio transmissions.
                     hm2WwanCellularChannel 1.3.6.1.4.1.248.11.125.1.4.1.11 integer32 read-only
The current channel number within the Cellular Band used for radio transmissions.
                     hm2WwanCellularSignalStrength 1.3.6.1.4.1.248.11.125.1.4.1.12 integer32 read-only
In GSM/UMTS mobile networks signal strength is based on RSSI (Received Signal Strength Indication) value measuring the power level being received by the antena. The higher the RSSI the stronger the signal.
                     hm2WwanCellularSignalStrengthLte 1.3.6.1.4.1.248.11.125.1.4.1.13 integer32 read-only
In LTE mobile networks signal strength is based on RSRP (Reference Signal Received Power) value.
                     hm2WwanCellularSignalQuality 1.3.6.1.4.1.248.11.125.1.4.1.14 integer32 read-only
UMTS signal quality indicator based on ECIO (Energy to Interference Ratio).
                     hm2WwanCellularSignalQualityLte 1.3.6.1.4.1.248.11.125.1.4.1.15 integer32 read-only
LTE signal quality indicator based on RSRQ (Reference Signal Received Quality).
                     hm2WwanCellularRscp 1.3.6.1.4.1.248.11.125.1.4.1.16 integer32 read-only
UMTS Received Signal Code Power is used as an indication of signal strength, as a handover criterion, in downlink power control and to calculate path loss.
                     hm2WwanCellularRoamingStatus 1.3.6.1.4.1.248.11.125.1.4.1.17 hm2roamingstatus read-only
Current Roaming status: * Home: registration done in home network. * Roaming: registration done in partner network in roaming mode. Roaming has to be admin enabled. * RoamingDisabled: no home network detected and Roaming is admin disabled.
                     hm2WwanCellularBitErrorRate 1.3.6.1.4.1.248.11.125.1.4.1.18 integer32 read-only
Cellular transmission error rate displayed in percentage.
                     hm2WwanCellularCurrentTxRate 1.3.6.1.4.1.248.11.125.1.4.1.19 unsigned32 read-only
Current channel TX rate displayed in kbps.
                     hm2WwanCellularCurrentRxRate 1.3.6.1.4.1.248.11.125.1.4.1.20 unsigned32 read-only
Current channel RX rate displayed in kbps.
                     hm2WwanCellularMaxTxRate 1.3.6.1.4.1.248.11.125.1.4.1.21 unsigned32 read-only
Maximum channel TX rate that can be achieved, displayed in kbps.
                     hm2WwanCellularMaxRxRate 1.3.6.1.4.1.248.11.125.1.4.1.22 unsigned32 read-only
Maximum channel RX rate that can be achieved, displayed in kbps.
                 hm2WwanModemInformationGroup 1.3.6.1.4.1.248.11.125.1.4.2
                     hm2WwanModemManufacturer 1.3.6.1.4.1.248.11.125.1.4.2.1 snmpadminstring read-only
Radio Modem Manufacturer
                     hm2WwanModemModel 1.3.6.1.4.1.248.11.125.1.4.2.2 snmpadminstring read-only
The model of the Radio Modem.
                     hm2WwanModemRevision 1.3.6.1.4.1.248.11.125.1.4.2.3 snmpadminstring read-only
Modem Software version and revision.
                     hm2WwanModemImei 1.3.6.1.4.1.248.11.125.1.4.2.4 snmpadminstring read-only
Internation Mobile Equipment Identity is a unique number given to mobile capable devices.