HM2-TRAFFICMGMT-MIB: View SNMP OID List / Download MIB

VENDOR: RICHARD HIRSCHMANN


 Home MIB: HM2-TRAFFICMGMT-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hm2TrafficMgmtMib 1.3.6.1.4.1.248.11.31
Hirschmann Traffic Management MIB. Copyright (C) 2011. All Rights Reserved.
       hm2TrafficMgmtMibNotifications 1.3.6.1.4.1.248.11.31.0
       hm2TrafficMgmtMibObjects 1.3.6.1.4.1.248.11.31.1
           hm2TrafficMgmtIfTable 1.3.6.1.4.1.248.11.31.1.1 no-access
A list of management objects for traffic control per interface.
               hm2TrafficMgmtIfEntry 1.3.6.1.4.1.248.11.31.1.1.1 no-access
Traffic Mgmt table entry.
                   hm2TrafficMgmtIfFlowControl 1.3.6.1.4.1.248.11.31.1.1.1.1 hmenabledstatus read-write
Enables or disables flow control per port
                   hm2TrafficMgmtIfEgressShapingRate 1.3.6.1.4.1.248.11.31.1.1.1.2 unsigned32 read-write
Maximum bandwidth allowed for this interface as a whole, typically used to shape the outbound transmission rate. The value is either specified in terms of percentage of overall link speed for the port in 1% increments or absolute in kbps. A value of 0 means there is no maximum bandwidth limit in effect. The default value is 0. Valid value ranges depend on the value returned by object hm2TrafficMgmtIfEgressShapingRateUnit. If that object returns percent(1), hm2TrafficMgmtIfEgressShapingRate accepts values 0..100. If that object returns kbps(2), hm2TrafficMgmtIfEgressShapingRate accepts values 0,64..4294967295.
                   hm2TrafficMgmtIfEgressShapingRateUnit 1.3.6.1.4.1.248.11.31.1.1.1.3 integer read-only
The unit of the interface shaping value. Can be either percentage of port speed or kilobits per second (kbps). Enumeration: 'kbps': 2, 'percent': 1.
                   hm2TrafficMgmtIfIngressStormCtlThresholdUnit 1.3.6.1.4.1.248.11.31.1.1.1.4 integer read-write
Configures the units of the threshold value(s) to percentage of port speed or absolute packets per second. Enumeration: 'pps': 2, 'percent': 1.
                   hm2TrafficMgmtIfIngressStormCtlBcastMode 1.3.6.1.4.1.248.11.31.1.1.1.5 hmenabledstatus read-write
If enabled, broadcast storm recovery will function on this port. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the broadcast traffic.
                   hm2TrafficMgmtIfIngressStormCtlBcastThreshold 1.3.6.1.4.1.248.11.31.1.1.1.6 unsigned32 read-write
Configures the broadcast storm recovery threshold for this port as a percentage of port speed in 1% increments or as an absolute pps rate. This threshold is also valid for multicasts or unknown unicasts, when the device does not support a separate limiter per storm type. (A separate limiter per storm-type is supported when hm2TrafficMgmtIngressStormBucketType has the value 'multi-bucket')
                   hm2TrafficMgmtIfIngressStormCtlMcastMode 1.3.6.1.4.1.248.11.31.1.1.1.7 hmenabledstatus read-write
If enabled, multicast storm recovery will function on this port. When you specify Enable for multicast Storm Recovery and the multicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the multicast traffic.
                   hm2TrafficMgmtIfIngressStormCtlMcastThreshold 1.3.6.1.4.1.248.11.31.1.1.1.8 unsigned32 read-write
Configures the multicast storm recovery threshold for this port as a percentage of port speed in 1% increments or as an absolute pps rate.
                   hm2TrafficMgmtIfIngressStormCtlUcastMode 1.3.6.1.4.1.248.11.31.1.1.1.9 hmenabledstatus read-write
If enabled, unknown unicast storm recovery will function on this port. When you specify Enable for unicast Storm Recovery and the unknown unicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the unknown unicast traffic.
                   hm2TrafficMgmtIfIngressStormCtlUcastThreshold 1.3.6.1.4.1.248.11.31.1.1.1.10 unsigned32 read-write
Configures the unicast storm recovery threshold for this port as a percentage of port speed in 1% increments or as an absolute pps rate.
           hm2TrafficMgmtFlowControl 1.3.6.1.4.1.248.11.31.1.2 hmenabledstatus read-write
Enables or disables flow control for the switch unit.
           hm2TrafficMgmtIngressStormBucketType 1.3.6.1.4.1.248.11.31.1.3 integer read-only
Enables or disables ingress storm admin state. Enumeration: 'multi-bucket': 2, 'single-bucket': 1.