HM2-POE-MIB: View SNMP OID List / Download MIB

VENDOR: RICHARD HIRSCHMANN


 Home MIB: HM2-POE-MIB
Download as:   
SNMPv2-CONF, HM2-DEVMGMT-MIB, SNMP-FRAMEWORK-MIB, HM2-TC-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hm2PoeMgmtMib 1.3.6.1.4.1.248.11.12
Hirschmann Power over Ethernet Management MIB. This MIB contains the private extensions to the RFC 3621. Copyright (C) 2011. All Rights Reserved.
       hm2PoeMgmtMibNotifications 1.3.6.1.4.1.248.11.12.0
           hm2PoeMgmtModulePowerUsageOnNotification 1.3.6.1.4.1.248.11.12.0.1
This Notification indicate PSE Threshold usage indication is on, the usage power is above the threshold. At least 500 msec must elapse between notifications being emitted by the same object instance.
           hm2PoeMgmtModulePowerUsageOffNotification 1.3.6.1.4.1.248.11.12.0.2
This Notification indicate PSE Threshold usage indication is on, the usage power is below the threshold. At least 500 msec must elapse between notifications being emitted by the same object instance.
           hm2PoeMgmtPortMaxConfiguredPowerLimitExceeded 1.3.6.1.4.1.248.11.12.0.3
This trap reports an exceeding of the configured power limit. This notification indicates that a PD consumes more power that the maximum configured on the port and the system reserved the maximum power required for the negotiated class.
       hm2PoeMgmtMibObjects 1.3.6.1.4.1.248.11.12.1
           hm2PoeMgmtGroup 1.3.6.1.4.1.248.11.12.1.1
               hm2PoeMgmtGlobalGroup 1.3.6.1.4.1.248.11.12.1.1.1
                   hm2PoeMgmtAdminStatus 1.3.6.1.4.1.248.11.12.1.1.1.1 hmenabledstatus read-write
Enables/disables Power over Ethernet management on this device.
                   hm2PoeMgmtReservedPower 1.3.6.1.4.1.248.11.12.1.1.1.2 integer32 read-only
Reserved system power for active Power over Ethernet ports in Watts.
               hm2PoeMgmtPsuTable 1.3.6.1.4.1.248.11.12.1.1.2 no-access
This table contains objects for each power supply type of the device (internal or external power supply).
                   hm2PoeMgmtPsuEntry 1.3.6.1.4.1.248.11.12.1.1.2.1 no-access
The entries of the hm2PoeMgmtPsuTable.
                       hm2PoeMgmtPsuPower 1.3.6.1.4.1.248.11.12.1.1.2.1.1 integer32 read-only
The power budget per psu type expressed in Watts. Psu types could be internal or external.
                       hm2PoeMgmtPsuReservedPower 1.3.6.1.4.1.248.11.12.1.1.2.1.2 integer32 read-only
The reserved power (depending on actual power classes) per psu type expressed in Watts.
                       hm2PoeMgmtPsuDeliveredPower 1.3.6.1.4.1.248.11.12.1.1.2.1.3 integer32 read-only
The measured usage power per psu type expressed in Watts.
               hm2PoeMgmtPortTable 1.3.6.1.4.1.248.11.12.1.1.3 no-access
This table contains objects for each Power over Ethernet interface of the device.
                   hm2PoeMgmtPortEntry 1.3.6.1.4.1.248.11.12.1.1.3.1 no-access
The entry of the hm2PoeMgmtPortTable.
                       hm2PoeMgmtPortAdminEnable 1.3.6.1.4.1.248.11.12.1.1.3.1.1 hmenabledstatus read-write
enable (1) An interface which can provide the PSE functions. disable(2) The interface will act - as it would - if it had no PSE function.
                       hm2PoeMgmtPortConsumptionPower 1.3.6.1.4.1.248.11.12.1.1.3.1.2 integer32 read-only
Measured usage power per interface expressed in Milliwatts.
                       hm2PoeMgmtPortDetectionStatus 1.3.6.1.4.1.248.11.12.1.1.3.1.3 integer read-only
Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state DISABLED. A value of deliveringPower(3) - indicates that the PSE State diagram is in the state POWER_ON. A value of fault(4) - indicates that the PSE State diagram is in the state TEST_ERROR. A value of test(5) - indicates that the PSE State diagram is in the state TEST_MODE. A value of otherFault(6) - indicates that the PSE State diagram is in the state IDLE due to the variable error_conditions. A value of searching(2)- indicates the PSE State diagram is in a state other than those listed above. Enumeration: 'otherFault': 6, 'fault': 4, 'searching': 2, 'deliveringPower': 3, 'disabled': 1, 'test': 5.
                       hm2PoeMgmtPortPowerPriority 1.3.6.1.4.1.248.11.12.1.1.3.1.4 integer read-write
This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations by disconnecting first ports with lower power priority. Ports that connect devices critical to the operation of the network - like the E911 telephones ports - should be set to higher priority. Enumeration: 'high': 2, 'critical': 1, 'low': 3.
                       hm2PoeMgmtPortPowerClassification 1.3.6.1.4.1.248.11.12.1.1.3.1.5 integer read-only
Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute hm2PoeMgmtPortDetectionStatus is reporting the enumeration deliveringPower. Enumeration: 'class4': 5, 'class2': 3, 'class3': 4, 'class0': 1, 'class1': 2.
                       hm2PoeMgmtPortName 1.3.6.1.4.1.248.11.12.1.1.3.1.6 snmpadminstring read-write
A manager will set the value of this variable to indicate the type of powered device that is connected to the port. The default value supplied by the agent if no value has ever been set should be a zero-length octet string.
                       hm2PoeMgmtPortAllowedClassBits 1.3.6.1.4.1.248.11.12.1.1.3.1.7 bits read-write
Bit mask which defines allowed classes per interface. Bits: 'class4': 4, 'class2': 2, 'class3': 3, 'class0': 0, 'class1': 1.
                       hm2PoeMgmtPortAutoShutdown 1.3.6.1.4.1.248.11.12.1.1.3.1.8 hmenabledstatus read-write
Enables/disables automatic shutdown functionality per interface.
                       hm2PoeMgmtPortAutoShutdownTimeStart 1.3.6.1.4.1.248.11.12.1.1.3.1.9 hmtimehhmm24 read-write
Start time for the automatic shutdown functionality per interface.
                       hm2PoeMgmtPortAutoShutdownTimeEnd 1.3.6.1.4.1.248.11.12.1.1.3.1.10 hmtimehhmm24 read-write
End time for the automatic shutdown functionality per interface.
                       hm2PoeMgmtPortClassValid 1.3.6.1.4.1.248.11.12.1.1.3.1.11 integer read-only
Evaluates if class represented through pethPsePortPowerClassifications is valid or not. Class is valid if PD is delivered with power or in case of power exceeding through a connected device. Enumeration: 'valid': 1, 'invalid': 0.
                       hm2PoeMgmtPortFastStartup 1.3.6.1.4.1.248.11.12.1.1.3.1.12 hmenabledstatus read-write
Enables/disables Power over Ethernet fast startup mode on given port. The default value is 'disable'.
                       hm2PoeMgmtPortMaxConsumptionPower 1.3.6.1.4.1.248.11.12.1.1.3.1.13 integer32 read-only
The maximum observed power consumption (hm2PoeMgmtPortMaxConsumptionPower) value expressed in milliwatts used by the PD. The value is reset to 0 if the PoE admin state is set to disable or if a disconnect of the PD is detected.
                       hm2PoeMgmtPortPowerLimit 1.3.6.1.4.1.248.11.12.1.1.3.1.14 integer32 read-write
The power limit per port expressed in milliwatts. If set to zero the power consumption limitation is disabled.
               hm2PoeMgmtModuleTable 1.3.6.1.4.1.248.11.12.1.1.4 no-access
This table contains objects for each plugged PoE module of the device. If the device is non-modular and supports PoE it contains only one entry.
                   hm2PoeMgmtModuleEntry 1.3.6.1.4.1.248.11.12.1.1.4.1 no-access
The entries of the hm2PoeMgmtModuleTable.
                       hm2PoeMgmtModuleUnitIndex 1.3.6.1.4.1.248.11.12.1.1.4.1.1 integer32 no-access
Unit number - for stacking devices.
                       hm2PoeMgmtModuleSlotIndex 1.3.6.1.4.1.248.11.12.1.1.4.1.2 integer32 no-access
Slot number of the plugged PoE module.
                       hm2PoeMgmtModulePower 1.3.6.1.4.1.248.11.12.1.1.4.1.3 integer32 read-write
Configurable power budget per module expressed in Watts. The default value is hm2PoeMgmtModuleMaximumPower and depends on the hardware.
                       hm2PoeMgmtModuleMaximumPower 1.3.6.1.4.1.248.11.12.1.1.4.1.4 integer32 read-only
Maximum available power budget per module expressed in Watts. This value depends on the device or module.
                       hm2PoeMgmtModuleReservedPower 1.3.6.1.4.1.248.11.12.1.1.4.1.5 integer32 read-only
The reserved power (depending on actual power classes) per module expressed in Watts.
                       hm2PoeMgmtModuleDeliveredPower 1.3.6.1.4.1.248.11.12.1.1.4.1.6 integer32 read-only
The measured usage power per module expressed in Watts.
                       hm2PoeMgmtModulePowerSource 1.3.6.1.4.1.248.11.12.1.1.4.1.7 integer read-only
This object displays the type of the PoE power source. internal (0) means that the PoE power is used from the internal PSU and external (1) means that a external PoE PSU must be installed and connected to this module. Enumeration: 'internal': 0, 'external': 1.
                       hm2PoeMgmtModuleUsageThreshold 1.3.6.1.4.1.248.11.12.1.1.4.1.8 integer32 read-write
The usage power threshold per module expressed in percent. If this threshold is exceeded a alarm is initiated.
                       hm2PoeMgmtModuleNotificationControlEnable 1.3.6.1.4.1.248.11.12.1.1.4.1.9 hmenabledstatus read-write
This object controls, on a per-module basis, whether or not notifications from the agent are enabled.