HM2-PLATFORM-MSRP-MIB: View SNMP OID List / Download MIB

VENDOR: RICHARD HIRSCHMANN


 Home MIB: HM2-PLATFORM-MSRP-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hm2PlatformMSRP 1.3.6.1.4.1.248.12.60.2.3
The Hirschmann Private Platform2 MIB for 802.1Qat, 802.1Qav Configuration. Copyright (C) 2013. All Rights Reserved.
     hm2AgentDot1qMsrp 1.3.6.1.4.1.248.12.60.2.3.1
         hm2AgentDot1qPortMsrpTable 1.3.6.1.4.1.248.12.60.2.3.1.1 no-access
A table of MSRP control information about every bridge port. This is indexed by hm2AgentDot1qMsrpPort.
             hm2AgentDot1qPortMsrpEntry 1.3.6.1.4.1.248.12.60.2.3.1.1.1 no-access
MSRP control information for a bridge port.
                 hm2AgentDot1qMsrpPort 1.3.6.1.4.1.248.12.60.2.3.1.1.1.1 integer32 no-access
The MSRP port number.
                 hm2AgentDot1qPortMsrpEnabledStatus 1.3.6.1.4.1.248.12.60.2.3.1.1.1.2 truthvalue read-write
The administrative state of MSRP operation on this port. The value true(1) indicates that MSRP is enabled on this port in all VLANs as long as hm2AgentDot1qBridgeMsrpEnabledStatus is also true(1). A value of false(2) indicates that MSRP is disabled on this port in all VLANs: any MSRP frames received will be silently discarded, and no MSRP registrations will be propagated from other ports. Setting this to a value of true(1) will be stored by the agent but will only take effect on the MSRP protocol operation if hm2AgentDot1qBridgeMsrpEnabledStatus also indicates the value true(1). This object affects all MSRP Applicant and Registrar state machines on this port. A transition from false(2) to true(1) will cause a reset of all MSRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system.
                 hm2AgentDot1qPortMsrpFailedRegistrations 1.3.6.1.4.1.248.12.60.2.3.1.1.1.3 counter64 read-only
The total number of failed MSRP registrations, for any reason, in all VLANs, on this port. Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
                 hm2AgentDot1qPortMsrpLastPduOrigin 1.3.6.1.4.1.248.12.60.2.3.1.1.1.4 macaddress read-only
The Source MAC Address of the last MSRP message received on this port.
                 hm2AgentDot1qPortMsrpPvid 1.3.6.1.4.1.248.12.60.2.3.1.1.1.5 vlanid read-write
The default VLAN ID that Streams are assigned to. Talkers learn this VID from the SRP Domain attribute and tag Streams accordingly.
         hm2AgentDot1qBridgeMsrpEnabledStatus 1.3.6.1.4.1.248.12.60.2.3.1.2 truthvalue read-write
The administrative status requested by management for MSRP. The value true(1) indicates that MSRP should be enabled on this device, in all VLANs, on all ports for which it has not been specifically disabled. When false(2), MSRP is disabled, in all VLANs and on all ports, and all MSRP frames will be forwarded transparently. This objects affects both Applicant and Registrar state machines. A transition from false(2) to true(1) will cause a reset of all MSRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.
         hm2AgentDot1qBridgeMsrpTalkerPruning 1.3.6.1.4.1.248.12.60.2.3.1.3 truthvalue read-write
The value of the talkerPruning parameter which controls the propagation of Talker declarations. The value true(1) indicates that Talker attributes are only declared on ports that have the Stream destination_address registered in the MMRP MAC Address Registration Entries. When false(2), Talker attribute are declared on all egress ports in the active topology. The value of this object MUST be retained across reinitializations of the management system.
         hm2AgentDot1qBridgeMsrpMaxFanInPorts 1.3.6.1.4.1.248.12.60.2.3.1.4 unsigned32 read-write
The value of the msrpMaxFanInPorts parameter which limits the total number of ports on a Bridge that are allowed to establish reservations for inbound Streams. A value of zero (0) indicates no fan-in limit is being specified and calculations involving fan-in will only be limited by the number of MSRP enabled ports. The value of this object MUST be retained across reinitializations of the management system.
         hm2AgentDot1qBridgeMsrpBoundaryPropagate 1.3.6.1.4.1.248.12.60.2.3.1.6 truthvalue read-write
The value of the boundaryPropagate parameter which controls the propagation of Talker declarations. The value true(1) indicates that Talker attributes are propagated to the ports marked as boundary port. When false(2) Talker attributes are not propagated to the ports marked as boundary port. The value of this object MUST be retained across reinitializations of the management system.
         hm2AgentDot1qMsrpStreamTable 1.3.6.1.4.1.248.12.60.2.3.1.7 no-access
A table of detailed MSRP stream information. This is indexed by Stream ID.
             hm2AgentDot1qMsrpStreamEntry 1.3.6.1.4.1.248.12.60.2.3.1.7.1 no-access
A list of objects containing characteristics for each registered Stream. Rows in the table are automatically created for Streams registered on any port of a bridge
                 hm2AgentDot1qMsrpStreamIndex 1.3.6.1.4.1.248.12.60.2.3.1.7.1.1 integer32 no-access
An index for MSRP Details Table.
                 hm2AgentDot1qMsrpStreamID 1.3.6.1.4.1.248.12.60.2.3.1.7.1.2 hm2agentdot1qmsrpstreamidvalue read-only
The Stream ID associated with the row of the table. Rows in the table are automatically created when Streams are registered via MSRP.
                 hm2AgentDot1qMsrpStreamDestMacAddr 1.3.6.1.4.1.248.12.60.2.3.1.7.1.3 macaddress read-only
The MAC destination address for the Stream described by this reservation.
                 hm2AgentDot1qMsrpStreamVlanId 1.3.6.1.4.1.248.12.60.2.3.1.7.1.4 integer32 read-only
The VLAN ID associated with the MSRP registration for this Stream.
                 hm2AgentDot1qMsrpStreamTspecMaxFrameSize 1.3.6.1.4.1.248.12.60.2.3.1.7.1.5 unsigned32 read-only
The maximum size frame that will be sent by a Talker for this Stream. This value is part of the Traffic Specification for the Stream.
                 hm2AgentDot1qMsrpStreamTspecMaxIntervalFrames 1.3.6.1.4.1.248.12.60.2.3.1.7.1.6 unsigned32 read-only
The maximum number of frame that will be sent during a class measurement interval. This value is part of the Traffic Specification for the Stream.
                 hm2AgentDot1qMsrpStreamDataFramePriority 1.3.6.1.4.1.248.12.60.2.3.1.7.1.7 hm2agentdot1qpriorityvalue read-only
The 802.1Q user priority value that the referenced Stream will be tagged with. This value is used to distinguish Class A and Class B traffic.
                 hm2AgentDot1qMsrpStreamRank 1.3.6.1.4.1.248.12.60.2.3.1.7.1.8 hm2agentdot1qmsrpstreamrankvalue read-only
SRP supports emergency and non-emergency. Emergency traffic will interrupt non-emergency traffic if there is insufficient bandwidth or resources available for the emergency traffic.
         hm2AgentDot1qMsrpReservationTable 1.3.6.1.4.1.248.12.60.2.3.1.8 no-access
A table containing Stream attribute registrations per port.
             hm2AgentDot1qMsrpReservationEntry 1.3.6.1.4.1.248.12.60.2.3.1.8.1 no-access
A list of objects containing Stream attribute registrations per port. Rows in the table are automatically created for Streams registered on any port of a bridge.
                 hm2AgentDot1qMsrpReservationStreamId 1.3.6.1.4.1.248.12.60.2.3.1.8.1.1 hm2agentdot1qmsrpstreamidvalue no-access
The Stream ID associated with the row of the table. Rows in the table are automatically created when Streams are registered via MSRP.
                 hm2AgentDot1qMsrpReservationDirection 1.3.6.1.4.1.248.12.60.2.3.1.8.1.2 hm2agentdot1qmsrpreservationdirectionvalue no-access
The source of this Stream registration, either Talker or Listener.
                 hm2AgentDot1qMsrpReservationDeclarationType 1.3.6.1.4.1.248.12.60.2.3.1.8.1.3 hm2agentdot1qmsrpreservationdeclarationtypevalue read-only
The type of Talker or Listener registration.
                 hm2AgentDot1qMsrpReservationAccumulatedLatency 1.3.6.1.4.1.248.12.60.2.3.1.8.1.4 unsigned32 read-only
The Accumulated Latency associated with the current registration. For Talker registrations this represents the accumulated latency from the Talker to the ingress port of this Bridge. For Listener registrations this represents the accumulated latency to the ingress port of the neighbor Bridge or end stations. This include the latency of the media attached to this egress port.
                 hm2AgentDot1qMsrpReservationFailureBridgeId 1.3.6.1.4.1.248.12.60.2.3.1.8.1.5 bridgeid read-only
The first Bridge that changes a Talker Advertise to a Talker Failed registration will report its Bridge Identification in this field. That single Bridge Identification is then propagated from Bridge to Bridge.
                 hm2AgentDot1qMsrpReservationFailureCode 1.3.6.1.4.1.248.12.60.2.3.1.8.1.6 hm2agentdot1qmsrpreservationfailurecodevalue read-only
The first Bridge that changes a Talker Advertise to a Talker Failed registration will report the Failure Code in this field. That single Failure Code is then propagated from Bridge to Bridge.
                 hm2AgentDot1qMsrpReservationDroppedStreamFrames 1.3.6.1.4.1.248.12.60.2.3.1.8.1.7 counter64 read-only
A count of the number of data stream frames that have been dropped for whatever reason. These are not MSRP frames, but the stream data frames that are carried by the MSRP Reservation. Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
                 hm2AgentDot1qMsrpReservationStreamAge 1.3.6.1.4.1.248.12.60.2.3.1.8.1.8 unsigned32 read-only
The number of seconds since the reservation was established on this port. Talkers shall report this as the seconds since the first receipt of the Talker Advertise or Talker Failed. Listeners shall report this as the number of seconds since the destination_address was first added to the Dynamic Reservations Entries.
     hm2AgentDot1qMrpMsrpStats 1.3.6.1.4.1.248.12.60.2.3.2
         hm2AgentDot1qMrpMsrpPktTx 1.3.6.1.4.1.248.12.60.2.3.2.1 counter32 read-only
The number of frames was transmitted.
         hm2AgentDot1qMrpMsrpPktRx 1.3.6.1.4.1.248.12.60.2.3.2.2 counter32 read-only
The number of frames was received.
         hm2AgentDot1qMrpMsrpPktRxBadHeader 1.3.6.1.4.1.248.12.60.2.3.2.3 counter32 read-only
The number of frames with bad header was received.
         hm2AgentDot1qMrpMsrpPktRxBadFormat 1.3.6.1.4.1.248.12.60.2.3.2.4 counter32 read-only
The number of frames with bad data field was received.
         hm2AgentDot1qMrpMsrpPktTxFailure 1.3.6.1.4.1.248.12.60.2.3.2.5 counter32 read-only
The number of frames was not transmitted.
         hm2AgentDot1qMrpMsrpStatsTable 1.3.6.1.4.1.248.12.60.2.3.2.6 no-access
A table which contains MSRP statistics per port.
             hm2AgentDot1qMrpMsrpStatsEntry 1.3.6.1.4.1.248.12.60.2.3.2.6.1 no-access
MSRP statistics entry.
                 hm2AgentDot1qMrpMsrpIntf 1.3.6.1.4.1.248.12.60.2.3.2.6.1.1 integer32 no-access
Index of hm2AgentDot1qMrpMsrpStatistics table.
                 hm2AgentDot1qMrpMsrpPortPktTx 1.3.6.1.4.1.248.12.60.2.3.2.6.1.2 counter32 read-only
The number of frames was transmitted on interface.
                 hm2AgentDot1qMrpMsrpPortPktRx 1.3.6.1.4.1.248.12.60.2.3.2.6.1.3 counter32 read-only
The number of frames was received on interface.
                 hm2AgentDot1qMrpMsrpPortPktRxBadHeader 1.3.6.1.4.1.248.12.60.2.3.2.6.1.4 counter32 read-only
The number of frames with bad header was received on interface.
                 hm2AgentDot1qMrpMsrpPortPktRxBadFormat 1.3.6.1.4.1.248.12.60.2.3.2.6.1.5 counter32 read-only
The number of frames with bad data field was received on interface.
                 hm2AgentDot1qMrpMsrpPortPktTxFailure 1.3.6.1.4.1.248.12.60.2.3.2.6.1.6 counter32 read-only
The number of frames was not transmitted on interface.
                 hm2AgentDot1qMrpMsrpPortPktRegFailure 1.3.6.1.4.1.248.12.60.2.3.2.6.1.7 counter32 read-only
The number of failed registration attempts on interface.
         hm2AgentDot1qMrpMsrpPktMessageFailure 1.3.6.1.4.1.248.12.60.2.3.2.7 counter32 read-only
The number of failures while adding message into MSRP queue.
     hm2AgentDot1qFqtss 1.3.6.1.4.1.248.12.60.2.3.3
         hm2AgentDot1qFqtssNotifications 1.3.6.1.4.1.248.12.60.2.3.3.0
         hm2AgentDot1qFqtssObjects 1.3.6.1.4.1.248.12.60.2.3.3.1
         hm2AgentDot1qFqtssConformance 1.3.6.1.4.1.248.12.60.2.3.3.2
         hm2AgentDot1qFqtssBap 1.3.6.1.4.1.248.12.60.2.3.3.3
             hm2AgentDot1qFqtssBapTable 1.3.6.1.4.1.248.12.60.2.3.3.3.1 no-access
A table containing a set of bandwidth availability parameters for each traffic class that supports the credit-based shaper algorithm. All writable objects in this table must be persistent over power up restart/reboot.
                 hm2AgentDot1qFqtssBapEntry 1.3.6.1.4.1.248.12.60.2.3.3.3.1.1 no-access
A list of objects containing bandwidth allocation information for each traffic class that supports the credit-based shaper algorithm. Rows in the table are automatically created and deleted as a result of the operation of the algorithm described in 34.5.
                     hm2AgentDot1qFqtssTrafficClass 1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.1 hm2agentdot1qfqtsstrafficclassvalue no-access
The traffic class number associated with the row of the table. A row in this table is created for each traffic class that supports the credit-based shaper algrithm and whose bandwidth can be reserved for AV traffic.
                     hm2AgentDot1qFqtssDeltaBandwidth 1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.2 hm2agentdot1qfqtssdeltabandwidthvalue read-write
The value of the deltaBandwidth parameter for the traffic class. This value is represented as a fixed point number scaled by a factor of 1,000,000; i.e., 100,000,000 (the maximum value) represents 100%. The default value of the deltaBandwidth parameter for the highest numbered traffic class that supports the credit-based shaper algorithm is 75%; for all lower numbered traffic classes that support the credit-based shaper algorithm the default value is 0%. The value of this object MUST be retained across reinitializations of the management system.
                     hm2AgentDot1qFqtssOperIdleSlopeMs 1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.3 unsigned32 read-only
The most significant 32 bits of the bandwidth, in bits per second, that is currently allocated to the traffic class (idleSlope(N)). This object MUST be read at the same time as hm2AgentDot1qFqtssOperIdleSlopeLs, which represents the LS 32 bits of the value, in order for the read operation to succeed. If SRP is supported and in operation, then the reserved bandwidth is determined by the operation of SRP; otherwise, the value of hm2AgentDot1qFqtssOperIdleSlopeMs is equal to the value of hm2AgentDot1qFqtssAdminIdleSlopeMs. The value of this object MUST be retained across reinitializations of the management system.
                     hm2AgentDot1qFqtssOperIdleSlopeLs 1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.4 unsigned32 read-only
The least significant 32 bits of the bandwidth, in bits per second, that is currently allocated to the traffic class (idleSlope(N)). This object MUST be read at the same time as hm2AgentDot1qFqtssOperIdleSlopeMs, which represents the LS 32 bits of the value, in order for the read operation to succeed. If SRP is supported and in operation, then the reserved bandwidth is determined by the operation of SRP; otherwise, the value of hm2AgentDot1qFqtssOperIdleSlopeLs is equal to the value of hm2AgentDot1qFqtssAdminIdleSlopeLs.. The value of this object MUST be retained across reinitializations of the management system.
                     hm2AgentDot1qFqtssAdminIdleSlopeMs 1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.5 unsigned32 read-write
The most significant 32 bits of the bandwidth, in bits per second, that the manager desires to allocate to the traffic class as idleSlope(N). This object MUST be read or written at the same time as hm2AgentDot1qFqtssAdminIdleSlopeLs, which represents the LS 32 bits of the value, in order for the read or write operation to succeed. If SRP is supported and in operation, then the reserved bandwidth is determined by the operation of SRP, and any changes to the value of this object have no effect on the operational value of idleSlope(N). The value of this object MUST be retained across reinitializations of the management system.
                     hm2AgentDot1qFqtssAdminIdleSlopeLs 1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.6 unsigned32 read-write
The least significant 32 bits of the bandwidth, in bits per second, that the manager desires to allocate to the traffic class as idleSlope(N). This object MUST be read or written at the same time as hm2AgentDot1qFqtssAdminIdleSlopeMs, which represents the LS 32 bits of the value, in order for the read or write operation to succeed. If SRP is supported and in operation, then the reserved bandwidth is determined by the operation of SRP, and any changes to the value of this object have no effect on the operational value of idleSlope(N). The value of this object MUST be retained across reinitializations of the management system.
         hm2AgentDot1qFqtssMappings 1.3.6.1.4.1.248.12.60.2.3.3.4
             hm2AgentDot1qFqtssTxSelectionAlgorithmTable 1.3.6.1.4.1.248.12.60.2.3.3.4.1 no-access
A table containing the assignment of transmission selection algorithms to traffic classes for the Port. This table provides management of the Transmission Selection Algorithm Table defined in 8.6.8. For a given Port, a row in the table exists for each traffic class that is supported by the Port. The default assignments of transmission selection algorithms to traffic classes in the table are made on instantiation of the table, in accordance with the defaults defined in 8.6.8 and 34.5. All writable objects in this table must be persistent over power up restart/reboot.
                 hm2AgentDot1qFqtssTxSelectionAlgorithmEntry 1.3.6.1.4.1.248.12.60.2.3.3.4.1.1 no-access
A list of objects that contain the mapping of a traffic class value to a transmission selection algorithm value.
                     hm2AgentDot1qFqtssTxSelectionAlgorithmID 1.3.6.1.4.1.248.12.60.2.3.3.4.1.1.1 hm2agentdot1qftqsstxselectionalgorithmidvalue read-write
The identifier of the transmission selection algorithm assigned to the traffic class. The value of this object MUST be retained across reinitializations of the management system.
             hm2AgentDot1qFqtssSrpRegenOverrideTable 1.3.6.1.4.1.248.12.60.2.3.3.4.2 no-access
A table containing the set of priority regeneration table override values for the Port. The recommended default values of priorities associated with SR classes, and the corresponding override values, are defined in 6.9.4. All writable objects in this table must be persistent over power up restart/reboot.
                 hm2AgentDot1qFqtssSrpRegenOverrideEntry 1.3.6.1.4.1.248.12.60.2.3.3.4.2.1 no-access
A list of objects that contain the mapping of a priority value to a priority regeneration override value, and a boundary port indication. Rows in the table exist for all priorities that are associated with SR classes.
                     hm2AgentDot1qFqtssSrClassPriority 1.3.6.1.4.1.248.12.60.2.3.3.4.2.1.1 hm2agentdot1qpriorityvalue read-write
The priority value that is overridden at the SRP domain boundary.
                     hm2AgentDot1qFqtssPriorityRegenOverride 1.3.6.1.4.1.248.12.60.2.3.3.4.2.1.2 hm2agentdot1qpriorityvalue read-write
The priority value that is used to override the priority regeneration table entry at the SRP domain boundary. The value of this object MUST be retained across reinitializations of the management system.
                     hm2AgentDot1qFqtssSrpBoundaryPort 1.3.6.1.4.1.248.12.60.2.3.3.4.2.1.3 truthvalue read-only
The value of the SRPdomainBoundaryPort parameter (6.6.4) for the priority.