HH3C-STORAGE-SNAP-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-STORAGE-SNAP-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cStorageSnap 1.3.6.1.4.1.25506.10.2
This MIB describes the general information about snap of storage device.
     hh3cSnapMibObjects 1.3.6.1.4.1.25506.10.2.1
         hh3cGlobalSnapSettingsObject 1.3.6.1.4.1.25506.10.2.1.1
             hh3cAddtionalSpaceMaxSize 1.3.6.1.4.1.25506.10.2.1.1.1 integer32 read-only
This object identifies the maximal size of snapshot resource, safecache, and Continued replication Resource .
         hh3cSnapConfigTable 1.3.6.1.4.1.25506.10.2.1.2 no-access
This table contains some entity to config the snapshot resources for special logic volumes.
             hh3cSnapConfigEntry 1.3.6.1.4.1.25506.10.2.1.2.1 no-access
An entry containing configuration about the snapshot resource.
                 hh3cSnapLvIndex 1.3.6.1.4.1.25506.10.2.1.2.1.1 hh3clvidtype no-access
This object identifies the index of hh3cSnapConfigTable. The object identified by this index is the same object as identified by the same value of hh3cLvIndex.
                 hh3cSnapAreaId 1.3.6.1.4.1.25506.10.2.1.2.1.2 hh3clvidtype read-only
This object identifies the snapshot resource of the logic volume.
                 hh3cSnapAreaAutoExpand 1.3.6.1.4.1.25506.10.2.1.2.1.3 hh3cstorageenablestate read-only
This object describes if the space of snapshot resource can be expanded automatically.
                 hh3cSnapAreaThreshold 1.3.6.1.4.1.25506.10.2.1.2.1.4 integer32 read-only
If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaThreshold' means the threshold of the snapshot resource.
                 hh3cSnapAreaIncSize 1.3.6.1.4.1.25506.10.2.1.2.1.5 integer32 read-only
If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the amount of space to be allocated for each expansion.
                 hh3cSnapAreaMaxSize 1.3.6.1.4.1.25506.10.2.1.2.1.6 integer32 read-only
If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the max size of snapshot resource.
                 hh3cSnapAreaFullDeleteTM 1.3.6.1.4.1.25506.10.2.1.2.1.7 integer read-only
This object identifies if the snapshot resource is out of space and expand failed, if the system delete the old timemark until enough space or not. Enumeration: 'rotative': 1, 'none': 2.
                 hh3cSnapAreaNotify 1.3.6.1.4.1.25506.10.2.1.2.1.8 hh3cstorageenablestate read-only
This object describes if a snapshot notification should be send to the client when the system create a timemark.
                 hh3cSnapAreaStatus 1.3.6.1.4.1.25506.10.2.1.2.1.9 hh3cstorageonlinestate read-only
This object describes the state of the snapshot resource.
                 hh3cSnapRaidUuid 1.3.6.1.4.1.25506.10.2.1.2.1.10 hh3craididtype read-only
This object describes the raid where the snapshot resource is created.
                 hh3cSnapRaidSize 1.3.6.1.4.1.25506.10.2.1.2.1.11 integer32 read-only
This object describes the size designated when the snapshot resource is created.
                 hh3cSnapRaidSelectPolicy 1.3.6.1.4.1.25506.10.2.1.2.1.12 hh3cextendselectpolicy read-only
This object describes the policy when the snapshot resource is created automatically. Note that the value can not be 'none' when the value of associated hh3cSnapRaidUuid object is equal to null.
                 hh3cSnapAreaTotalSize 1.3.6.1.4.1.25506.10.2.1.2.1.13 integer32 read-only
This object identifies the current total size of the snapshot resource.
                 hh3cSnapAreaFreeSize 1.3.6.1.4.1.25506.10.2.1.2.1.14 integer32 read-only
This object identifies the free size of the snapshot resource.
                 hh3cSnapExtendTimes 1.3.6.1.4.1.25506.10.2.1.2.1.15 integer32 read-only
This object identifies the times the snapshot resource extended.
                 hh3cSnapRowStatus 1.3.6.1.4.1.25506.10.2.1.2.1.16 rowstatus read-only
This object identifies the action of snapshot resource. Note that the assocai snapshot resource can not be delete when a snapshot copy is processing or the TimeMark is enabled, or the replication is enabled.
         hh3cSnapExpandTable 1.3.6.1.4.1.25506.10.2.1.3 no-access
This table contains some entity to expand a snapshot resource.
             hh3cSnapExpandEntry 1.3.6.1.4.1.25506.10.2.1.3.1 no-access
An entry containing expand information applicable to the snapshot resource.
                 hh3cSAExpRaidUuid 1.3.6.1.4.1.25506.10.2.1.3.1.1 hh3craididtype no-access
This index is identical to hh3cRaidUuid in HH3C-RAID-MIB.
                 hh3cSAExpSize 1.3.6.1.4.1.25506.10.2.1.3.1.2 integer32 read-only
This object describes the increased size for snapshot resource when expanded. The units is million bytes. The value is always equal to zero when read.
                 hh3cSAExpRaidSize 1.3.6.1.4.1.25506.10.2.1.3.1.3 integer32 read-only
This object describes the size for snapshot resource on the raid. The units is million bytes. The value is always equal to zero when read.
                 hh3cSnapAreaExpRowStatus 1.3.6.1.4.1.25506.10.2.1.3.1.4 rowstatus read-only
This object describes the actions to expand the size for snap.
         hh3cSnapCopyTable 1.3.6.1.4.1.25506.10.2.1.4 no-access
This table contains some entity about snapshot copy.
             hh3cSnapCopyEntry 1.3.6.1.4.1.25506.10.2.1.4.1 no-access
An entry containing snapshot copy information applicable.
                 hh3cSnapCopyLvIndex 1.3.6.1.4.1.25506.10.2.1.4.1.1 hh3clvidtype read-write
This object identifies the index of destination logic volume for snapshot copy.
                 hh3cSnapCopyPercentage 1.3.6.1.4.1.25506.10.2.1.4.1.2 integer32 read-only
This object identifies the percentage of snapshot copy. The value is equal to zero if the snapshot copy has not started. When finished, the value is always equal to '100'.
                 hh3cSnapCopyStartTime 1.3.6.1.4.1.25506.10.2.1.4.1.3 dateandtime read-only
This object identifies the time to start the snapshot copy.
                 hh3cSnapCopySwitch 1.3.6.1.4.1.25506.10.2.1.4.1.4 integer read-write
This object describes the actions to start or stop the snapshot copy. When read, the value of 'none' will be get. Note that if the snapshot resource of source logic volume has not been created, the action of snapshot copy will be refused by agent. Enumeration: 'start': 1, 'none': 3, 'stop': 2.
         hh3cTimeMarkConfigTable 1.3.6.1.4.1.25506.10.2.1.5 no-access
This table contains some entity to config a TimeMark on a special logic volume.
             hh3cTimeMarkConfigEntry 1.3.6.1.4.1.25506.10.2.1.5.1 no-access
An entry containing config information applicable to the TimeMark.
                 hh3cTimeMarkCounts 1.3.6.1.4.1.25506.10.2.1.5.1.1 integer32 read-write
This object identifies the max num of TimeMark which can be configed.
                 hh3cTimeMarkInitializeTime 1.3.6.1.4.1.25506.10.2.1.5.1.2 dateandtime read-write
This object identifies the date and time when the first TimeMark is created on the logic volume.
                 hh3cTimeMarkInterval 1.3.6.1.4.1.25506.10.2.1.5.1.3 integer32 read-write
This object identifies the interval when the TimeMark is created automatically if the value of this object is not equal to zero. The units is second. the min value is 10 seconds.
                 hh3cTimeMarkLastTime 1.3.6.1.4.1.25506.10.2.1.5.1.4 dateandtime read-write
This object identifies the date and time when the latest TimeMark is created on the logic volume.
                 hh3cTimeMarkTotal 1.3.6.1.4.1.25506.10.2.1.5.1.5 integer32 read-only
This object identifies the current num of TimeMark.
                 hh3cTimeMarkSwitch 1.3.6.1.4.1.25506.10.2.1.5.1.6 hh3cstorageenablestate read-only
This object describes enable or disable TimeMark.
         hh3cTimeMarkCreateTable 1.3.6.1.4.1.25506.10.2.1.6 no-access
This table contains some entity to create a TimeMark on a special logic volume.
             hh3cTimeMarkCreateEntry 1.3.6.1.4.1.25506.10.2.1.6.1 no-access
An entry containing create information applicable to the TimeMark.
                 hh3cTimeMarkStamp 1.3.6.1.4.1.25506.10.2.1.6.1.1 dateandtime no-access
This object identifies the date and time the TimeMark is created.
                 hh3cTimeMarkComment 1.3.6.1.4.1.25506.10.2.1.6.1.2 octet string read-only
This object identifies the comment of the TimeMark.
                 hh3cTimeMarkSize 1.3.6.1.4.1.25506.10.2.1.6.1.3 integer32 read-only
This object identifies the current size of the TimeMark.
                 hh3cTimeMarkRowStatus 1.3.6.1.4.1.25506.10.2.1.6.1.4 rowstatus read-only
This object identifies the action to create or delete the TimeMark. Note that the TimeMark can not be deleted if it is using.
         hh3cTimeMarkCopyTable 1.3.6.1.4.1.25506.10.2.1.7 no-access
This table contains some entity about a TimeMark copy.
             hh3cTimeMarkCopyEntry 1.3.6.1.4.1.25506.10.2.1.7.1 no-access
An entry containing config information applicable to the TimeMark copy.
                 hh3cTMCopyDestLvId 1.3.6.1.4.1.25506.10.2.1.7.1.1 hh3clvidtype read-only
This object identifies the index of destination logic volume for TimeMark copy.
                 hh3cTMCopyPercentage 1.3.6.1.4.1.25506.10.2.1.7.1.2 integer32 read-only
This object identifies the percentage of TimeMark copy. The value is equal to zero if the TimeMark copy has not started. When finished, the value is always equal to '100'.
                 hh3cTMCopyStartTime 1.3.6.1.4.1.25506.10.2.1.7.1.3 dateandtime read-only
This object identifies the time to start the TimeMark copy.
                 hh3cTMCopySwitch 1.3.6.1.4.1.25506.10.2.1.7.1.4 integer read-write
This object describes the actions to start or stop the TimeMark copy. When read, the value of 'none' will be get. Enumeration: 'start': 1, 'none': 3, 'stop': 2.
         hh3cTimeMarkRollbackTable 1.3.6.1.4.1.25506.10.2.1.8 no-access
This table contains some entity to use a TimeMark to rollback the logic volume.
             hh3cTimeMarkRollbackEntry 1.3.6.1.4.1.25506.10.2.1.8.1 no-access
An entry containing config information applicable to use a TimeMark to rollback the logic volume.
                 hh3cTMRollbackPercentage 1.3.6.1.4.1.25506.10.2.1.8.1.1 integer32 read-only
This object identifies the percentage of rollback.
                 hh3cTMRollbackStartTime 1.3.6.1.4.1.25506.10.2.1.8.1.2 dateandtime read-only
This object identifies the time to start the rollback.
                 hh3cTMRollbackSwitch 1.3.6.1.4.1.25506.10.2.1.8.1.3 hh3cstorageactiontype read-write
This object describes the actions to use a TimeMark to rollback the logic volume. Note that once you roll back, you cannot roll forward, all the later TimeMark behind it will be deleted.
         hh3cTimeViewTable 1.3.6.1.4.1.25506.10.2.1.9 no-access
This table contains some entity to config a TimeView on a special TimeMark.
             hh3cTimeViewEntry 1.3.6.1.4.1.25506.10.2.1.9.1 no-access
An entry containing config information applicable to the TimeView.
                 hh3cTimeViewStamp 1.3.6.1.4.1.25506.10.2.1.9.1.1 dateandtime no-access
This object identifies the TimeView. The object identified by this index is the same object as identified by the same value of hh3cTimeMarkStamp.
                 hh3cTimeViewID 1.3.6.1.4.1.25506.10.2.1.9.1.2 hh3clvidtype read-only
This object identifies the TimeView.
                 hh3cTimeViewName 1.3.6.1.4.1.25506.10.2.1.9.1.3 octet string read-only
This object identifies the name of the TimeView.
                 hh3cTimeViewRowStatus 1.3.6.1.4.1.25506.10.2.1.9.1.4 rowstatus read-only
This object describes the actions to create or delete the TimeView.
         hh3cReplicaConfigTable 1.3.6.1.4.1.25506.10.2.1.10 no-access
This table contains some entity to config replication for a logic volume.
               hh3cReplicaConfigEntry 1.3.6.1.4.1.25506.10.2.1.10.1 no-access
An entry containing config information applicable to the replication for a logic volume.
                   hh3cRepLocalLvIndex 1.3.6.1.4.1.25506.10.2.1.10.1.1 hh3clvidtype no-access
This object identifies the local logic volume that is related with replication. The object identified by this index is the same object as identified by the same value of hh3cSnapLvIndex.
                   hh3cLvRepLocalWay 1.3.6.1.4.1.25506.10.2.1.10.1.2 integer read-only
The value of 'outgoing' means the hh3cRepLocalLvIndex is the primary logic volume of replication, and the hh3cRepRemoteLvIndex is the replica logic volume. The value of 'incoming' means the hh3cRepLocalLvIndex is the replica logic volume of replication. , and the hh3cRepRemoteLvIndex is the primary logic volume. Enumeration: 'outgoing': 1, 'incoming': 2.
                   hh3cRepLocalServerIP 1.3.6.1.4.1.25506.10.2.1.10.1.3 inetaddress read-only
This object identifies the ip address of local server.
                   hh3cRepLocalServerIPType 1.3.6.1.4.1.25506.10.2.1.10.1.4 inetaddresstype read-only
This object identifies the ip address type of local server.
                   hh3cRepLocalServerName 1.3.6.1.4.1.25506.10.2.1.10.1.5 octet string read-only
This object identifies the name of local server.
                   hh3cRepLocalServerUsername 1.3.6.1.4.1.25506.10.2.1.10.1.6 octet string read-only
This object identifies the username of local server.
                   hh3cRepLocalServerPassword 1.3.6.1.4.1.25506.10.2.1.10.1.7 octet string read-only
This object identifies the password of local server.
                   hh3cRepRemoteServerIP 1.3.6.1.4.1.25506.10.2.1.10.1.8 inetaddress read-only
This object identifies the ip address of remote server.
                   hh3cRepRemoteServerIPType 1.3.6.1.4.1.25506.10.2.1.10.1.9 inetaddresstype read-only
This object identifies the ip address type of remote server.
                   hh3cRepRemoteServerName 1.3.6.1.4.1.25506.10.2.1.10.1.10 octet string read-only
This object identifies the name of remote server.
                   hh3cRepRemoteServerUsername 1.3.6.1.4.1.25506.10.2.1.10.1.11 octet string read-only
This object identifies the username of remote server.
                   hh3cRepRemoteServerPassword 1.3.6.1.4.1.25506.10.2.1.10.1.12 octet string read-only
This object identifies the password of remote server.
                   hh3cRepRemoteLvIndex 1.3.6.1.4.1.25506.10.2.1.10.1.13 hh3clvidtype read-only
This object identifies the logic volume of remote server.
                   hh3cReplicaMode 1.3.6.1.4.1.25506.10.2.1.10.1.14 integer read-only
This object identifies the replication mode: The value of 'adaptive' means that data from the primary resource is continuously replicated to a replica resource unless the system determines it is not practical or possible. The value of 'remote' means that a snapshot is taken of the primary resource at prescribed intervals based on the criteria you set (schedule and/or watermark value). Note that the associated Continuous Replication Resource can not be created if the value of this boject is not equal to 'adaptive'. Enumeration: 'adaptive': 1, 'remote': 2, 'none': 3.
                   hh3cReplicaWatermark 1.3.6.1.4.1.25506.10.2.1.10.1.15 integer32 read-only
This object identifies the size of watermark which means a replication is scheduled.
                   hh3cReplicaWatermarkRetry 1.3.6.1.4.1.25506.10.2.1.10.1.16 integer32 read-only
If the 'hh3cReplicaWatermark' is set, This object identifies the interval time to retry if the last replication is failed. The units is minute.
                   hh3cReplicaInitializeTime 1.3.6.1.4.1.25506.10.2.1.10.1.17 dateandtime read-only
This object identifies the time to start an initial replication.
                   hh3cReplicaInterval 1.3.6.1.4.1.25506.10.2.1.10.1.18 integer32 read-only
This object identifies how often the replication should be repeated after initial replication. The units is minute.
                   hh3cReplicaEncrypt 1.3.6.1.4.1.25506.10.2.1.10.1.19 hh3cstorageenablestate read-only
This object identifies the encrypt option is enable or diable.
                   hh3cReplicaCompress 1.3.6.1.4.1.25506.10.2.1.10.1.20 hh3cstorageenablestate read-only
This object identifies the compress option is enable or diable.
                   hh3cReplicaUseExistTM 1.3.6.1.4.1.25506.10.2.1.10.1.21 hh3cstorageenablestate read-only
This object identifies if using the exist TimeMark to replicate or not.
                   hh3cReplicaProtocol 1.3.6.1.4.1.25506.10.2.1.10.1.22 integer read-only
This object identifies the protocol about replication. The value 'tcp' means Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol. Enumeration: 'rudp': 2, 'tcp': 1.
                   hh3cReplicaScanDiff 1.3.6.1.4.1.25506.10.2.1.10.1.23 truthvalue read-only
This object identifies the system to scan both the primary and replica resource to determine how much data needs to be synchronized.
                   hh3cReplicaStatSwitch 1.3.6.1.4.1.25506.10.2.1.10.1.24 integer read-only
This object identifies the action how to operate the replica. When read , a value of 'none' will be get. The value of 'promte' means remove the replication relation and promote the remote copy on the target server. The value of 'sync' means synchronize mannually (force a replication that is not scheduled.) The value of 'scan' means scan the delta data between primary resource and replica resource. The value of 'reversal' means switch the roles of the primary resource and replica resource. The replication configuration is maintained. The primary and replica must be synchronized in order to reverse a replica. The value of 'stop' means stop a replication that is currently in progress. The value of 'suspend' means suspend future replications from automatically being triggered by replication policies (watermark, interval, time). This will not stop a replication that is currently in progress. The value of 'resume' means resume the replication status from suspended to normal. Note that if the action of 'upgrade' is executed successfully, this replica resource will become a normal logic volume, and this entry will be deleted automatically. Note that if the action of 'reversal' is executed successfully, Clients will be disconnected from the former primary resource. Enumeration: 'promte': 1, 'none': 8, 'suspend': 6, 'scan': 3, 'resume': 7, 'stop': 5, 'sync': 2, 'reversal': 4.
                   hh3cReplicaRowStatus 1.3.6.1.4.1.25506.10.2.1.10.1.25 rowstatus read-only
This object identifies the action to enable or disable the replication.
         hh3cReplicaStateTable 1.3.6.1.4.1.25506.10.2.1.11 no-access
This table contains some entity to show replication state.
               hh3cReplicaStateEntry 1.3.6.1.4.1.25506.10.2.1.11.1 no-access
An entry containing show information applicable to the replication state.
                   hh3cReplicaDelta 1.3.6.1.4.1.25506.10.2.1.11.1.1 integer32 read-only
This object identifies the size of delta data after last sync.
                   hh3cReplicaLastSyncTime 1.3.6.1.4.1.25506.10.2.1.11.1.2 dateandtime read-only
This object identifies the date and time when last sync is taken.
                   hh3cReplicaNextSyncTime 1.3.6.1.4.1.25506.10.2.1.11.1.3 dateandtime read-only
This object identifies the date and time when next sync will be taken.
                   hh3cReplicaSyncTotalSize 1.3.6.1.4.1.25506.10.2.1.11.1.4 integer32 read-only
This object identifies how much data need to be synchronized to the replica resource for current replication.
                   hh3cReplicaSyncCurPercentage 1.3.6.1.4.1.25506.10.2.1.11.1.5 integer32 read-only
This object identifies how much data has been synchronized to the replica resource for current replication.
                   hh3cReplicaSyncPerformance 1.3.6.1.4.1.25506.10.2.1.11.1.6 integer32 read-only
This object identifies the performance of the synchronize. The unit is MB/s.
                   hh3cReplicaRunStatus 1.3.6.1.4.1.25506.10.2.1.11.1.7 integer read-only
This object identifies the state of the replica. Enumeration: 'idle': 2, 'suspend': 1, 'stop': 3, 'sync': 4, 'scan': 5.
         hh3cCDRConfigTable 1.3.6.1.4.1.25506.10.2.1.12 no-access
This table contains some entity to config Continuous Replication Resource.
               hh3cCDRConfigEntry 1.3.6.1.4.1.25506.10.2.1.12.1 no-access
An entry containing some information applicable to Continuous Replication Resource of the logic volume.
                   hh3cCDRLvIndex 1.3.6.1.4.1.25506.10.2.1.12.1.1 hh3clvidtype no-access
This object identifies the source logic volume of the Continuous Replication Resource. The object identified by this index is the same object as identified by the same value of hh3cRepLocalLvIndex. Note that an entry of hh3cCDRConfigTable can be created only when the associated hh3cCDRDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cCDRDistributeTable objects should be deleted automatically.
                   hh3cCDRID 1.3.6.1.4.1.25506.10.2.1.12.1.2 integer32 read-only
This object identifies the Continuous Replication Resource.
                   hh3cCDRStatus 1.3.6.1.4.1.25506.10.2.1.12.1.3 hh3cstorageonlinestate read-only
This object identifies the state of the Continuous Replication Resource.
                   hh3cCDRTotalSize 1.3.6.1.4.1.25506.10.2.1.12.1.4 integer32 read-only
This object identifies the total size of the Continuous Replication Resource.
                   hh3cCDRFreeSize 1.3.6.1.4.1.25506.10.2.1.12.1.5 integer32 read-only
This object identifies the free size of the Continuous Replication Resource.
                   hh3cCDRSelectPolicy 1.3.6.1.4.1.25506.10.2.1.12.1.6 hh3cextendselectpolicy read-only
This object describes the policy about allocating the space for Continuous Replication Resource.
                   hh3cCDRRowStatus 1.3.6.1.4.1.25506.10.2.1.12.1.7 rowstatus read-only
This object identifies the action to create or delete the Continuous Replication Resource.
         hh3cCDRDistributeTable 1.3.6.1.4.1.25506.10.2.1.13 no-access
This table contains some entity to config the distribution of Continuous Replication Resource.
               hh3cCDRDistributeEntry 1.3.6.1.4.1.25506.10.2.1.13.1 no-access
An entry containing some information applicable to the distribution of Continuous Replication Resource.
                   hh3cCDRDistLvIndex 1.3.6.1.4.1.25506.10.2.1.13.1.1 hh3clvidtype no-access
This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB.
                   hh3cCDRRaidUuid 1.3.6.1.4.1.25506.10.2.1.13.1.2 hh3craididtype no-access
This index is identical to hh3cRaidUuid in HH3C-RAID-MIB.
                   hh3cCDRRaidSize 1.3.6.1.4.1.25506.10.2.1.13.1.3 integer32 read-only
This object identifies the size on the special raid distributed for the Continuous Replication Resource.
                   hh3cCDRExtRowStatus 1.3.6.1.4.1.25506.10.2.1.13.1.4 rowstatus read-only
This object identifies the action to create the distribution for the Continuous Replication Resource.
         hh3cSafeCacheConfigTable 1.3.6.1.4.1.25506.10.2.1.14 no-access
This table contains some entity to config SafeCache.
               hh3cSafeCacheConfigEntry 1.3.6.1.4.1.25506.10.2.1.14.1 no-access
An entry containing some information applicable to SafeCache of the logic volume.
                   hh3cSafeCacheLvIndex 1.3.6.1.4.1.25506.10.2.1.14.1.1 hh3clvidtype no-access
This object identifies the source logic volume of the SafeCache. The object identified by this index is the same object as identified by the same value of hh3cLvindex. Note that an entry of hh3cSafeCacheConfigTable can be created only when the associated hh3cSafeCacheDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cSafeCacheDistributeTable objects should be deleted automatically.
                   hh3cSafeCacheID 1.3.6.1.4.1.25506.10.2.1.14.1.2 integer32 read-only
This object identifies a SafeCache.
                   hh3cSafeCacheStatus 1.3.6.1.4.1.25506.10.2.1.14.1.3 hh3cstorageonlinestate read-only
This object identifies the state of the SafeCache.
                   hh3cSafeCacheTotalSize 1.3.6.1.4.1.25506.10.2.1.14.1.4 integer32 read-only
This object identifies the total size of the SafeCache. The units is million bytes.
                   hh3cSafeCacheFreeSize 1.3.6.1.4.1.25506.10.2.1.14.1.5 integer32 read-only
This object identifies the free size of the SafeCache. The units is million bytes.
                   hh3cSafeCacheSelectPolicy 1.3.6.1.4.1.25506.10.2.1.14.1.6 hh3cextendselectpolicy read-only
This object describes the policy about allocating the space for SafeCache.
                   hh3cSafeCacheThreshold 1.3.6.1.4.1.25506.10.2.1.14.1.7 integer32 read-only
This object identifies the maximal percentage of date changed before data flushing.
                   hh3cSafeCacheFlushTime 1.3.6.1.4.1.25506.10.2.1.14.1.8 integer32 read-only
This object identifies the period during which the date can stay in cache before data flushing. The units is second.
                   hh3cSafeCacheFlushCommand 1.3.6.1.4.1.25506.10.2.1.14.1.9 integer32 read-only
This object identifies the number of commands when data flushing.
                   hh3cSafeCacheSkipDupWrite 1.3.6.1.4.1.25506.10.2.1.14.1.10 integer read-only
This object identifies skip duplicate write commands or not. Enumeration: 'enable': 1, 'disable': 2.
                   hh3cSafeCacheRunStatus 1.3.6.1.4.1.25506.10.2.1.14.1.11 integer read-only
This object identifies the run state of the SafeCache. Enumeration: 'suspend': 2, 'run': 1.
                   hh3cSafeCacheSwitch 1.3.6.1.4.1.25506.10.2.1.14.1.12 integer read-only
This object identifies the action of the SafeCache. The value 'suspend' means suspend the SafeCache. The value 'resume' means resume the SafeCache. Enumeration: 'none': 3, 'suspend': 1, 'resume': 2.
                   hh3cSafeCacheRowStatus 1.3.6.1.4.1.25506.10.2.1.14.1.13 rowstatus read-only
This object identifies the action to create or delete the SafeCache.
         hh3cSafeCacheDistributeTable 1.3.6.1.4.1.25506.10.2.1.15 no-access
This table contains some entity to config the SafeCache resource.
               hh3cSafeCacheDistributeEntry 1.3.6.1.4.1.25506.10.2.1.15.1 no-access
An entry containing some information applicable to SafeCache resource of the logic volume.
                   hh3cSafeCacheDistLvIndex 1.3.6.1.4.1.25506.10.2.1.15.1.1 hh3clvidtype no-access
This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB.
                   hh3cSafeCacheRaidUuid 1.3.6.1.4.1.25506.10.2.1.15.1.2 hh3craididtype no-access
This index is identical to hh3cRaidUuid in HH3C-RAID-MIB.
                   hh3cSafeCacheRaidSize 1.3.6.1.4.1.25506.10.2.1.15.1.3 integer32 read-only
This object identifies the size on the special raid distributed for the SafeCache resource.
                   hh3cSafeCacheExtRowStatus 1.3.6.1.4.1.25506.10.2.1.15.1.4 rowstatus read-only
This object identifies the action to create the distribution for the SafeCache resource.
         hh3cMirrorConfigTable 1.3.6.1.4.1.25506.10.2.1.16 no-access
This table contains some entity to config mirror.
               hh3cMirrorConfigEntry 1.3.6.1.4.1.25506.10.2.1.16.1 no-access
An entry containing some information applicable to mirror for the logic volume.
                   hh3cMirrorLvIndex 1.3.6.1.4.1.25506.10.2.1.16.1.1 hh3clvidtype no-access
This object identifies the source logic volume of the mirror. The object identified by this index is the same object as identified by the same value of hh3cLvindex. Note that an entry of hh3cMirrorConfigTable can be created only when the associated hh3cMirrorDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cMirrorDistributeTable objects should be deleted automatically.
                   hh3cMirrorType 1.3.6.1.4.1.25506.10.2.1.16.1.2 integer read-only
This object identifies the type of the mirror. Enumeration: 'async': 2, 'none': 3, 'sync': 1.
                   hh3cMirrorStatus 1.3.6.1.4.1.25506.10.2.1.16.1.3 hh3cstorageonlinestate read-only
This object identifies the state of the mirror resource.
                   hh3cMirrorName 1.3.6.1.4.1.25506.10.2.1.16.1.4 octet string read-only
This object identifies the name of the mirror resource. it is used when promote mirror resource.
                   hh3cMirrorSyncPercentage 1.3.6.1.4.1.25506.10.2.1.16.1.5 integer32 read-only
This object identifies the percentage of the mirror sync.
                   hh3cMirrorSyncPerformance 1.3.6.1.4.1.25506.10.2.1.16.1.6 integer32 read-only
This object identifies the performance of the mirror sync. The unit is MB/S
                   hh3cMirrorDelta 1.3.6.1.4.1.25506.10.2.1.16.1.7 integer32 read-only
This object identifies size of delta data after the last mirror sync.
                   hh3cMirrorRaidType 1.3.6.1.4.1.25506.10.2.1.16.1.8 integer read-only
This object identifies the raid type of the mirror resource. Enumeration: 'serviceEnable': 2, 'none': 3, 'virtual': 1.
                   hh3cMirrorSelectPolicy 1.3.6.1.4.1.25506.10.2.1.16.1.9 hh3cextendselectpolicy read-only
This object describes the policy about allocating the space for mirror resource.
                   hh3cMirrorSwitch 1.3.6.1.4.1.25506.10.2.1.16.1.10 integer read-only
This object identifies the state of the mirror. The value of 'sync' means synchronize mannually. The value of 'swap' means switch the roles of the primary resource and mirror resource. The value of 'promte' means break the mirrored pair and convert the mirror resource into an independent logic volume. The new logic volume will have all of the properties of a regular logic volume. Note that if the action of 'promte' is executed successfully, this mirror resource will become a primary logic volume, and this entry will be deleted automatically. Enumeration: 'none': 4, 'promote': 3, 'sync': 1, 'swap': 2.
                   hh3cMirrorExtendRaidUuid 1.3.6.1.4.1.25506.10.2.1.16.1.11 hh3craididtype read-only
This object identifies the raid of the mirror resource when the primary logic volume resource is extended.
                   hh3cMirrorRowStatus 1.3.6.1.4.1.25506.10.2.1.16.1.12 rowstatus read-only
This object identifies the action to create or delete the mirror resource.
         hh3cMirrorDistributeTable 1.3.6.1.4.1.25506.10.2.1.17 no-access
This table contains some entity to config the mirror resource.
               hh3cMirrorDistributeEntry 1.3.6.1.4.1.25506.10.2.1.17.1 no-access
An entry containing some information applicable to mirror resource for the logic volume.
                   hh3cMirrorDistLvIndex 1.3.6.1.4.1.25506.10.2.1.17.1.1 hh3clvidtype no-access
This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB.
                   hh3cMirrorRaidUuid 1.3.6.1.4.1.25506.10.2.1.17.1.2 hh3craididtype no-access
This index is identical to hh3cRaidUuid in HH3C-RAID-MIB.
                   hh3cMirrorRaidSize 1.3.6.1.4.1.25506.10.2.1.17.1.3 integer32 read-only
This object identifies the size on the special raid distributed for the mirror resource.
                   hh3cMirrorExtRowStatus 1.3.6.1.4.1.25506.10.2.1.17.1.4 rowstatus read-only
This object identifies the action to create or delete the distribution for the mirror resource.