HH3C-PPP-OVER-SONET-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-PPP-OVER-SONET-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, HH3C-OID-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cPos 1.3.6.1.4.1.25506.2.19
This MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions.
       hh3cPosMIBObjects 1.3.6.1.4.1.25506.2.19.1
           hh3cPosParamTable 1.3.6.1.4.1.25506.2.19.1.1 no-access
The pos parameter table.
               hh3cPosParamTableEntry 1.3.6.1.4.1.25506.2.19.1.1.1 no-access
The entry of pos table.
                   hh3cPosCRC 1.3.6.1.4.1.25506.2.19.1.1.1.1 integer read-write
The length of CRC Enumeration: 'crc32': 1, 'crc16': 2.
                   hh3cPosMTU 1.3.6.1.4.1.25506.2.19.1.1.1.2 integer32 read-write
Maximum Transfer Unit (MTU) of POS interface
                   hh3cPosScramble 1.3.6.1.4.1.25506.2.19.1.1.1.3 truthvalue read-write
Scrambling is used to avoid continuous 0 or 1 in signals. This object is to decide whether to scramble or not
                   hh3cPosClockSource 1.3.6.1.4.1.25506.2.19.1.1.1.4 integer read-write
The value indicates the source of clock signal. System indicates that clock signals are from device itself and line for clock signals from remote Enumeration: 'line': 2, 'system': 1.
                   hh3cPosSdhFlagJ0 1.3.6.1.4.1.25506.2.19.1.1.1.5 displaystring read-write
The section trace byte. This node is used when the frame type is sdh.
                   hh3cPosSdhFlagJ1 1.3.6.1.4.1.25506.2.19.1.1.1.6 displaystring read-write
The path trace byte. This node is used when the frame type is sdh.
                   hh3cPosSonetFlagJ0 1.3.6.1.4.1.25506.2.19.1.1.1.7 integer32 read-write
The section trace byte. This node is used when the frame type is sonet.
                   hh3cPosSonetFlagJ1 1.3.6.1.4.1.25506.2.19.1.1.1.8 displaystring read-write
The path trace byte. This node is used when the frame type is sonet.
                   hh3cPosFlagC2 1.3.6.1.4.1.25506.2.19.1.1.1.9 integer32 read-write
The parameter for the channel signal value of C2 byte
                   hh3cPosFrameType 1.3.6.1.4.1.25506.2.19.1.1.1.10 integer read-write
The frame type that encapsulates the packet. Default frame type is sdh(Synchronous Digital Hierarchy) It also can be configured using sonet type(Synchronous Optical Network). Enumeration: 'sonet': 2, 'sdh': 1.
                   hh3cPosBindVlanId 1.3.6.1.4.1.25506.2.19.1.1.1.11 integer32 read-write
The vlan that this pos port binds. The vlan can not include any other port, otherwise error will be returned. If the vlan has a virtual interface, the status of virtual interface will be up or down according to the link status or this pos.
                   hh3cPosEncapsulation 1.3.6.1.4.1.25506.2.19.1.1.1.12 integer read-write
The type of encapsulation Enumeration: 'fr': 3, 'ppp': 1, 'hdlc': 2.
                   hh3cPoskeepaliveTimeout 1.3.6.1.4.1.25506.2.19.1.1.1.13 integer32 read-write
The keeplive of ppp, hdlc or fr. It is the query interval of link status. Two members of a link should have same keeplive. The default 0 prohibits detecting status of link.
                   hh3cPosBERthresholdSF 1.3.6.1.4.1.25506.2.19.1.1.1.14 integer32 read-write
The bit-error rate threshold for Signal Fault. SF threshold should be greater than SD threshold.
                   hh3cPosBERthresholdSD 1.3.6.1.4.1.25506.2.19.1.1.1.15 integer32 read-write
The bit-error rate threshold for Signal Degrade. SD threshold should be less than SF threshold.
                   hh3cPosB1Error 1.3.6.1.4.1.25506.2.19.1.1.1.16 counter64 read-only
Counter for SBIPE(Section Bit Interleave Parity Error)
                   hh3cPosB2Error 1.3.6.1.4.1.25506.2.19.1.1.1.17 counter64 read-only
Counter for LBIPE(Line Bit Interleave Parity Error)
                   hh3cPosB3Error 1.3.6.1.4.1.25506.2.19.1.1.1.18 counter64 read-only
Counter for PBIPE(Path Bit Interleave Parity Error)
                   hh3cPosM1Error 1.3.6.1.4.1.25506.2.19.1.1.1.19 counter64 read-only
How many times does LREI(Line Remote Error Indication) occur
                   hh3cPosG1Error 1.3.6.1.4.1.25506.2.19.1.1.1.20 counter64 read-only
How many times does PREI(Path Remote Error Indication) occur
                   hh3cPosFlagJ0Type 1.3.6.1.4.1.25506.2.19.1.1.1.21 integer read-write
The frame type that encapsulates the flag J0. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type. Enumeration: 'sonet': 2, 'sdh': 1.
                   hh3cPosFlagJ1Type 1.3.6.1.4.1.25506.2.19.1.1.1.22 integer read-write
The frame type that encapsulates the flag J1. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type. Enumeration: 'sonet': 2, 'sdh': 1.
                   hh3cPosB1TCAThreshold 1.3.6.1.4.1.25506.2.19.1.1.1.23 integer32 read-write
Threshold for B1 TCA.
                   hh3cPosB2TCAThreshold 1.3.6.1.4.1.25506.2.19.1.1.1.24 integer32 read-write
Threshold for B2 TCA.
                   hh3cPosB3TCAThreshold 1.3.6.1.4.1.25506.2.19.1.1.1.25 integer32 read-write
Threshold for B3 TCA.
                   hh3cPosB1TCAEnable 1.3.6.1.4.1.25506.2.19.1.1.1.26 integer read-write
Enable traps of B1 TCA. Enumeration: 'enable': 1, 'disable': 2.
                   hh3cPosB2TCAEnable 1.3.6.1.4.1.25506.2.19.1.1.1.27 integer read-write
Enable traps of B2 TCA. Enumeration: 'enable': 1, 'disable': 2.
                   hh3cPosB3TCAEnable 1.3.6.1.4.1.25506.2.19.1.1.1.28 integer read-write
Enable traps of B3 TCA. Enumeration: 'enable': 1, 'disable': 2.
       hh3cPosMIBNotificationsPrefix 1.3.6.1.4.1.25506.2.19.2
           hh3cPosMIBNotifications 1.3.6.1.4.1.25506.2.19.2.0
               hh3cPosLOSAlarm 1.3.6.1.4.1.25506.2.19.2.0.1
Alarm indicates loss of signal
               hh3cPosLOFAlarm 1.3.6.1.4.1.25506.2.19.2.0.2
Alarm indicates loss of frame
               hh3cPosOOFAlarm 1.3.6.1.4.1.25506.2.19.2.0.3
Alarm indicates out of frame
               hh3cPosLAISAlarm 1.3.6.1.4.1.25506.2.19.2.0.4
Alarm when LAIS(Line Alarm Indication Signal) arrives
               hh3cPosLRDIAlarm 1.3.6.1.4.1.25506.2.19.2.0.5
Alarm when LRDI(Line Remote Defect Indication) arrives
               hh3cPosPRDIAlarm 1.3.6.1.4.1.25506.2.19.2.0.6
Alarm when PRDI(Path Remote Defect Indication) arrives
               hh3cPosPAISAlarm 1.3.6.1.4.1.25506.2.19.2.0.7
Alarm when PAIS(Path Alarm Indication Signal) arrives
               hh3cPosLOPAlarm 1.3.6.1.4.1.25506.2.19.2.0.8
Alarm indicates loss of pointer
               hh3cPosSTIMAlarm 1.3.6.1.4.1.25506.2.19.2.0.9
Alarm indicates inconsistency between sent and received J0 bytes.
               hh3cPosPTIMAlarm 1.3.6.1.4.1.25506.2.19.2.0.10
Alarm indicates inconsistency between sent and received J1 bytes.
               hh3cPosPSLMAlarm 1.3.6.1.4.1.25506.2.19.2.0.11
Alarm indicates a mismatched C2 byte.
               hh3cPosLSDAlarm 1.3.6.1.4.1.25506.2.19.2.0.12
Alarm indicates that the B2 bit-error rate exceeds SD threshold.
               hh3cPosLSFAlarm 1.3.6.1.4.1.25506.2.19.2.0.13
Alarm indicates that the B2 bit-error rate exceeds SF threshold.
               hh3cPosNormalAlarm 1.3.6.1.4.1.25506.2.19.2.0.14
Alarm indicates that the Pos interface state returns normal.
               hh3cPosB1TCAlarm 1.3.6.1.4.1.25506.2.19.2.0.15
Threshold crossing alarms for B1.
               hh3cPosB2TCAlarm 1.3.6.1.4.1.25506.2.19.2.0.16
Threshold crossing alarms for B2.
               hh3cPosB3TCAlarm 1.3.6.1.4.1.25506.2.19.2.0.17
Threshold crossing alarms for B3.