HH3C-NQA-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-NQA-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cNqa 1.3.6.1.4.1.25506.8.3
The private MIB file includes the test information of the device. It is supplementary for rfc2925.txt.
     hh3cNqaObjects 1.3.6.1.4.1.25506.8.3.1
         hh3cNqaMIBVersion 1.3.6.1.4.1.25506.8.3.1.1 displaystring read-only
Version string of this MIB. The format will be: 'Version.Release.Patch: Description' An instance likes: '1.0.0: Initial NQA MIB'
         hh3cNqaCtlTable 1.3.6.1.4.1.25506.8.3.1.2 no-access
Defines the NQA Control Extend Table for providing, via SNMP, the capability of performing network analysis operations at a remote host.
             hh3cNqaCtlEntry 1.3.6.1.4.1.25506.8.3.1.2.1 no-access
Defines an entry in the hh3cNqaCtlTable. The operation of this table is same as that of pingResultsTable.
                 hh3cNqaCtlTargetPort 1.3.6.1.4.1.25506.8.3.1.2.1.1 integer32 read-only
The destination port that may be used by udpEcho, tcpConnect and jitter probes.
                 hh3cNqaCtlSourcePort 1.3.6.1.4.1.25506.8.3.1.2.1.2 integer32 read-only
The source port that may be used by all tests except for dns and dlsw. If no source port is specified, system will create a random port as source port.
                 hh3cNqaCtlTTL 1.3.6.1.4.1.25506.8.3.1.2.1.3 integer32 read-only
Specifies the value to store in the TTL Field in the IP packet used to encapsulate the NQA probe.
                 hh3cNqaCtlJitterAdminInterval 1.3.6.1.4.1.25506.8.3.1.2.1.4 integer32 read-only
Time value in milliseconds that is an interval between two continuous probes in jitter test. This object is only used by jitter test.
                 hh3cNqaCtlJitterAdminNumPackets 1.3.6.1.4.1.25506.8.3.1.2.1.5 integer32 read-only
Packet number that specifys how many packets will be sent in one jitter test. This object is only used by jitter test.
                 hh3cNqaCtlHttpOperationType 1.3.6.1.4.1.25506.8.3.1.2.1.6 integer read-only
Http operation type: get or post. Enumeration: 'post': 2, 'get': 1.
                 hh3cNqaCtlHttpOperationString 1.3.6.1.4.1.25506.8.3.1.2.1.7 displaystring read-only
Http operation string. For example, if the http operation type is get, the string will be url, home page and http version.
                 hh3cNqaCtlFtpOperationType 1.3.6.1.4.1.25506.8.3.1.2.1.8 integer read-only
Ftp operation type. Enumeration: 'put': 2, 'get': 1.
                 hh3cNqaCtlFtpUsername 1.3.6.1.4.1.25506.8.3.1.2.1.9 displaystring read-only
Ftp username.
                 hh3cNqaCtlFtpPassword 1.3.6.1.4.1.25506.8.3.1.2.1.10 displaystring read-only
Ftp password.
                 hh3cNqaCtlFtpOperationString 1.3.6.1.4.1.25506.8.3.1.2.1.11 displaystring read-only
Ftp operation string. If the ftp operation type is get, the string must be the file name which will be gotten from ftp server.
                 hh3cNqaCtlVPNInstance 1.3.6.1.4.1.25506.8.3.1.2.1.12 displaystring read-only
VPN name by which system finds route in the specified VPN to send NQA probe packets.
                 hh3cNqaCtlHistoryKeptTime 1.3.6.1.4.1.25506.8.3.1.2.1.13 integer32 read-only
To indicate how long the history records will be saved in the pingProbeHistoryTable table after the test stopped.
                 hh3cNqaCtlHistoryEnable 1.3.6.1.4.1.25506.8.3.1.2.1.14 integer read-only
To indicate whether the history should be recorded in the PingProbeHistoryTable or not. enabled(1) --history will be recorded disabled(2) --history will not be recorded. Enumeration: 'disabled': 2, 'enabled': 1.
                 hh3cNqaCtlICPIFAdvFactor 1.3.6.1.4.1.25506.8.3.1.2.1.15 integer32 read-only
The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) values. Suggestion values: |-----------------------------------|-------| | Service |factor | |-----------------------------------|-------| |conventional wire-line | 0 | |-----------------------------------|-------| |mobility within Building | 5 | |-----------------------------------|-------| |mobility within geographical area | 10 | |-----------------------------------|-------| |access to hard-to-reach location | 20 | |-----------------------------------|-------|
                 hh3cNqaCtlCodecType 1.3.6.1.4.1.25506.8.3.1.2.1.16 integer read-only
To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe. Enumeration: 'notDefined': 1, 'g729A': 4, 'g711Ulaw': 3, 'icmpTimestamp': 5, 'g711Alaw': 2.
         hh3cNqaResultsTable 1.3.6.1.4.1.25506.8.3.1.3 no-access
Defines the NQA Results Extend Table for providing the capability of performing NQA operations at a remote host. The results of these operations are stored in the hh3cNqaResultsTable. The operation of this table is same as that of pingResultsTable.
             hh3cNqaResultsEntry 1.3.6.1.4.1.25506.8.3.1.3.1 no-access
The operation of this table is same as that of pingResultsTable.
                 hh3cNqaResultsRttNumDisconnects 1.3.6.1.4.1.25506.8.3.1.3.1.1 unsigned32 read-only
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
                 hh3cNqaResultsRttTimeouts 1.3.6.1.4.1.25506.8.3.1.3.1.2 unsigned32 read-only
The number of times that a NQA probe failed because the probe timed out.
                 hh3cNqaResultsRttBusies 1.3.6.1.4.1.25506.8.3.1.3.1.3 unsigned32 read-only
The number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. The next test will not start until the next Frequency.
                 hh3cNqaResultsRttNoConnections 1.3.6.1.4.1.25506.8.3.1.3.1.4 unsigned32 read-only
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
                 hh3cNqaResultsRttDrops 1.3.6.1.4.1.25506.8.3.1.3.1.5 unsigned32 read-only
The number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources.
                 hh3cNqaResultsRttSequenceErrors 1.3.6.1.4.1.25506.8.3.1.3.1.6 unsigned32 read-only
The number of packets arrived out of sequence.
                 hh3cNqaResultsRttStatsErrors 1.3.6.1.4.1.25506.8.3.1.3.1.7 unsigned32 read-only
The number of some other errors.
                 hh3cNqaResultsMaxDelaySD 1.3.6.1.4.1.25506.8.3.1.3.1.8 unsigned32 read-only
The maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In jitter test, if destination system time is not valid, the SD delay may be set 0.
                 hh3cNqaResultsMaxDelayDS 1.3.6.1.4.1.25506.8.3.1.3.1.9 unsigned32 read-only
The maximal delay from destination device to source device. Currently this value is only used for jitter test, and this value is 0 in other type test. In jitter test, if destination system time is not valid, the DS delay may be set 0.
                 hh3cNqaResultsLostPacketRatio 1.3.6.1.4.1.25506.8.3.1.3.1.10 unsigned32 read-only
The value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent packets.
                 hh3cNqaResultsPacketLateArrival 1.3.6.1.4.1.25506.8.3.1.3.1.11 unsigned32 read-only
The value of this object indicates the number of the packets that arrived after the timeout.
                 hh3cNqaResultsRttSum 1.3.6.1.4.1.25506.8.3.1.3.1.12 unsigned32 read-only
The sum of round trip time.
                 hh3cNqaResultsNumOfDelaySD 1.3.6.1.4.1.25506.8.3.1.3.1.13 unsigned32 read-only
The number of delay from source to destination that are successfully measured.
                 hh3cNqaResultsMinDelaySD 1.3.6.1.4.1.25506.8.3.1.3.1.14 unsigned32 read-only
The minimum of all one way times from source to destination.
                 hh3cNqaResultsSumDelaySD 1.3.6.1.4.1.25506.8.3.1.3.1.15 unsigned32 read-only
The sum of one way times from source to destination.
                 hh3cNqaResultsSum2DelaySD 1.3.6.1.4.1.25506.8.3.1.3.1.16 unsigned32 read-only
The sum of squares of one way times from source to destination.
                 hh3cNqaResultsNumOfDelayDS 1.3.6.1.4.1.25506.8.3.1.3.1.17 unsigned32 read-only
The number of delay from destination to source that are successfully measured.
                 hh3cNqaResultsMinDelayDS 1.3.6.1.4.1.25506.8.3.1.3.1.18 unsigned32 read-only
The minimum of all one way times from destination to source.
                 hh3cNqaResultsSumDelayDS 1.3.6.1.4.1.25506.8.3.1.3.1.19 unsigned32 read-only
The sum of one way times from destination to source.
                 hh3cNqaResultsSum2DelayDS 1.3.6.1.4.1.25506.8.3.1.3.1.20 unsigned32 read-only
The sum of squares of one way times from destination to source.
         hh3cNqaJitterStatsTable 1.3.6.1.4.1.25506.8.3.1.4 no-access
Statistics table for latest jitter activity.
             hh3cNqaJitterStatsEntry 1.3.6.1.4.1.25506.8.3.1.4.1 no-access
An entry contains the statistics for the latest jitter activity. This entry is created only if the pingCtlType is hh3cNqajitter.
                 hh3cNqaJitterStatsNumOfRTT 1.3.6.1.4.1.25506.8.3.1.4.1.1 counter32 read-only
The number of received destination device responses with which jitter test can reach round-trip time.
                 hh3cNqaJitterStatsMinOfPositivesSD 1.3.6.1.4.1.25506.8.3.1.4.1.2 gauge32 read-only
The value of time that records the minimal positive jitter value from source to destination in the jitter test.
                 hh3cNqaJitterStatsMaxOfPositivesSD 1.3.6.1.4.1.25506.8.3.1.4.1.3 gauge32 read-only
The value of time that records the maximal positive jitter value from source to destination in the jitter test.
                 hh3cNqaJitterStatsNumOfPositivesSD 1.3.6.1.4.1.25506.8.3.1.4.1.4 gauge32 read-only
The number that records positive jitter times from source to destination in the jitter test. The total number of the value of all positive jitters in packets sent from source to destination.
                 hh3cNqaJitterStatsSumOfPositivesSD 1.3.6.1.4.1.25506.8.3.1.4.1.5 gauge32 read-only
The value of time that records the sum of positive jitter values from source to destination in the jitter test.
                 hh3cNqaJitterStatsSum2PositivesSD 1.3.6.1.4.1.25506.8.3.1.4.1.6 gauge32 read-only
The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
                 hh3cNqaJitterStatsMinOfNegativesSD 1.3.6.1.4.1.25506.8.3.1.4.1.7 gauge32 read-only
The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
                 hh3cNqaJitterStatsMaxOfNegativesSD 1.3.6.1.4.1.25506.8.3.1.4.1.8 gauge32 read-only
The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
                 hh3cNqaJitterStatsNumOfNegativesSD 1.3.6.1.4.1.25506.8.3.1.4.1.9 gauge32 read-only
The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values in packets sent from source to destination.
                 hh3cNqaJitterStatsSumOfNegativesSD 1.3.6.1.4.1.25506.8.3.1.4.1.10 gauge32 read-only
The value of time that records the sum of negative jitter values from source to destination in the jitter test. The total number of the value of all negative jitters in packets sent from source to destination.
                 hh3cNqaJitterStatsSum2NegativesSD 1.3.6.1.4.1.25506.8.3.1.4.1.11 gauge32 read-only
The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
                 hh3cNqaJitterStatsMinOfPositivesDS 1.3.6.1.4.1.25506.8.3.1.4.1.12 gauge32 read-only
The value of time that records the minimal positive jitter value from destination to source in the jitter test.
                 hh3cNqaJitterStatsMaxOfPositivesDS 1.3.6.1.4.1.25506.8.3.1.4.1.13 gauge32 read-only
The value of time that records the maximal positive jitter value from destination to source in the jitter test.
                 hh3cNqaJitterStatsNumOfPositivesDS 1.3.6.1.4.1.25506.8.3.1.4.1.14 gauge32 read-only
The number that records positive jitter times from destination to source in the jitter test.
                 hh3cNqaJitterStatsSumOfPositivesDS 1.3.6.1.4.1.25506.8.3.1.4.1.15 gauge32 read-only
The value of time that records the sum of positive jitter values from destination to source in the jitter test.
                 hh3cNqaJitterStatsSum2PositivesDS 1.3.6.1.4.1.25506.8.3.1.4.1.16 gauge32 read-only
The value of time that records the sum of square of positive jitter values from destination to source in the jitter test.
                 hh3cNqaJitterStatsMinOfNegativesDS 1.3.6.1.4.1.25506.8.3.1.4.1.17 gauge32 read-only
The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
                 hh3cNqaJitterStatsMaxOfNegativesDS 1.3.6.1.4.1.25506.8.3.1.4.1.18 gauge32 read-only
The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
                 hh3cNqaJitterStatsNumOfNegativesDS 1.3.6.1.4.1.25506.8.3.1.4.1.19 gauge32 read-only
The number that records negative jitter times from destination to source in the jitter test.
                 hh3cNqaJitterStatsSumOfNegativesDS 1.3.6.1.4.1.25506.8.3.1.4.1.20 gauge32 read-only
The value of time that records the sum of negative jitter values from destination to source in the jitter test.
                 hh3cNqaJitterStatsSum2NegativesDS 1.3.6.1.4.1.25506.8.3.1.4.1.21 gauge32 read-only
The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
                 hh3cNqaJitterStatsPacketLossSD 1.3.6.1.4.1.25506.8.3.1.4.1.22 gauge32 read-only
The lost packets number sent from source to destination.
                 hh3cNqaJitterStatsPacketLossDS 1.3.6.1.4.1.25506.8.3.1.4.1.23 gauge32 read-only
The lost packets number sent from destination to source.
                 hh3cNqaJitterStatsAvePositivesSD 1.3.6.1.4.1.25506.8.3.1.4.1.24 gauge32 read-only
The value of time that records the average positive jitter value from source to destination.
                 hh3cNqaJitterStatsAveNegativesSD 1.3.6.1.4.1.25506.8.3.1.4.1.25 gauge32 read-only
The value of time that records the average negative jitter value from source to destination.
                 hh3cNqaJitterStatsAvePositivesDS 1.3.6.1.4.1.25506.8.3.1.4.1.26 gauge32 read-only
The value of time that records the average positive jitter value from destination to source.
                 hh3cNqaJitterStatsAveNegativesDS 1.3.6.1.4.1.25506.8.3.1.4.1.27 gauge32 read-only
The value of time that records the average negative jitter value from destination to source.
                 hh3cNqaJitterStatsPktLossUnknown 1.3.6.1.4.1.25506.8.3.1.4.1.28 gauge32 read-only
The number of packets which is lost with unknown reason.
                 hh3cNqaJitterStatsOperOfICPIF 1.3.6.1.4.1.25506.8.3.1.4.1.29 gauge32 read-only
The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test.
                 hh3cNqaJitterStatsOperOfMOS 1.3.6.1.4.1.25506.8.3.1.4.1.30 gauge32 read-only
The MOS (Mean Opinion Score) value for the latest jitter test.
         hh3cNqaAgentEnable 1.3.6.1.4.1.25506.8.3.1.5 integer read-write
Enable NQA agent function. Enumeration: 'enable': 1, 'disable': 2.
         hh3cNqaTcpServerTable 1.3.6.1.4.1.25506.8.3.1.6 no-access
A table which contains the status of NQA tcp server configuration information.
             hh3cNqaTcpServerEntry 1.3.6.1.4.1.25506.8.3.1.6.1 no-access
A table which contains the status of NQA tcp server configuration information. This entry includes not only the tcp server ip address but also the tcp server port.
                 hh3cNqaTcpServerIpAddress 1.3.6.1.4.1.25506.8.3.1.6.1.1 inetaddress no-access
Tcp server's ip address.
                 hh3cNqaTcpServerPort 1.3.6.1.4.1.25506.8.3.1.6.1.2 integer32 no-access
Tcp server's port number.
                 hh3cNqaTcpServerRowStatus 1.3.6.1.4.1.25506.8.3.1.6.1.3 rowstatus read-only
hh3cNqaTcpServerIpAddress and hh3cNqaTcpServerPort must be set during a creation operation.
         hh3cNqaUdpServerTable 1.3.6.1.4.1.25506.8.3.1.7 no-access
Status of NQA udp server configuration information.
             hh3cNqaUdpServerEntry 1.3.6.1.4.1.25506.8.3.1.7.1 no-access
This entry includes not only the udp server ip address but also the udp server udp port.
                 hh3cNqaUdpServerIpAddress 1.3.6.1.4.1.25506.8.3.1.7.1.1 inetaddress no-access
Udp server's ip address.
                 hh3cNqaUdpServerPort 1.3.6.1.4.1.25506.8.3.1.7.1.2 integer32 no-access
Udp server's port number.
                 hh3cNqaUdpServerRowStatus 1.3.6.1.4.1.25506.8.3.1.7.1.3 rowstatus read-only
hh3cNqaUdpServerIpAddress and hh3cNqaUdpServerPort must be set during a creation operation.
         hh3cNqaServerEnable 1.3.6.1.4.1.25506.8.3.1.8 integer read-write
Enable NQA server function. Enumeration: 'enable': 1, 'disable': 2.
         hh3cNqaStatsMaxGroupNumber 1.3.6.1.4.1.25506.8.3.1.9 integer32 read-only
The maximum number saved per group. The maximum value of hh3cNqaCtlStatisticsGroupNumber can not exceed the value of this object.
         hh3cNqaStatisticsCtlTable 1.3.6.1.4.1.25506.8.3.1.10 no-access
Defines the NQA statistics control table for providing, via SNMP, the capability of performing NQA operations at a remote host. The results of these operations are stored in the hh3cNqaStatisticsResultsTable and the hh3cNqaGroupStatsJitterTable.
               hh3cNqaStatisticsCtlEntry 1.3.6.1.4.1.25506.8.3.1.10.1 no-access
Defines an entry in the hh3cNqaStatisticsCtlTable. The hh3cNqaStatisticsCtlTable has the same index as the pingCtlTable in order for a hh3cNqaStatisticsCtlTable to correspond to the pingCtlEntry.
                   hh3cNqaCtlStatisticsInterval 1.3.6.1.4.1.25506.8.3.1.10.1.1 unsigned32 read-only
Statistic information will be calculated after the time that is the value of hh3cNqaCtlStatisticsInterval.
                   hh3cNqaCtlStatisticsGroupNumber 1.3.6.1.4.1.25506.8.3.1.10.1.2 unsigned32 read-only
The value of this object indicates the number of group saved. The length of this object is from 1 to hh3cNqaStatsMaxGroupNumber.
                   hh3cNqaCtlStatisticsKeptTime 1.3.6.1.4.1.25506.8.3.1.10.1.3 unsigned32 read-only
To indicate how long the statistic information will be saved after the test stops.
                   hh3cNqaCtlBeginTime 1.3.6.1.4.1.25506.8.3.1.10.1.4 dateandtime read-only
Time at which the type-specified test will start.
                   hh3cNqaCtlLifeTime 1.3.6.1.4.1.25506.8.3.1.10.1.5 unsigned32 read-only
To indicate how long the type-specified test will last.
         hh3cNqaStatisticsResultsTable 1.3.6.1.4.1.25506.8.3.1.11 no-access
Defines the NQA statistics results table for providing the capability of performing NQA operations at a remote host. The statistics results of these operations in a statistic cycle are stored in the hh3cNqaStatisticsResultsTable. The statistic cycle is the value of hh3cNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that the probe statistics result (Hh3cNqaStatisticsResultsEntry) belongs to.
               hh3cNqaStatisticsResultsEntry 1.3.6.1.4.1.25506.8.3.1.11.1 no-access
Defines an entry in the hh3cNqaStatisticsResultsTable. The hh3cNqaStatisticsResultsTable has the same index as the pingCtlTable in order for a hh3cNqaStatisticsResultsEntry to correspond to the pingCtlEntry that caused it to be created.
                   hh3cNqaStatResIndex 1.3.6.1.4.1.25506.8.3.1.11.1.1 unsigned32 no-access
An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hh3cNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
                   hh3cNqaStatResIpTargetAddressType 1.3.6.1.4.1.25506.8.3.1.11.1.2 inetaddresstype read-only
This object indicates the type of address stored in the corresponding hh3cNqaStatResIpTargetAddress object.
                   hh3cNqaStatResIpTargetAddress 1.3.6.1.4.1.25506.8.3.1.11.1.3 inetaddress read-only
This object represent the host address to be used at a remote host for performing a network analysis operation.
                   hh3cNqaStatResMinRtt 1.3.6.1.4.1.25506.8.3.1.11.1.4 gauge32 read-only
The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
                   hh3cNqaStatResMaxRtt 1.3.6.1.4.1.25506.8.3.1.11.1.5 gauge32 read-only
The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
                   hh3cNqaStatResAverageRtt 1.3.6.1.4.1.25506.8.3.1.11.1.6 gauge32 read-only
The average NQA probe round-trip-time (RTT).
                   hh3cNqaStatResProbeResponses 1.3.6.1.4.1.25506.8.3.1.11.1.7 counter32 read-only
The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received.
                   hh3cNqaStatResSentProbes 1.3.6.1.4.1.25506.8.3.1.11.1.8 counter32 read-only
The value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent.
                   hh3cNqaStatResRttSumOfSquares 1.3.6.1.4.1.25506.8.3.1.11.1.9 counter32 read-only
This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been received.
                   hh3cNqaStatResStartTime 1.3.6.1.4.1.25506.8.3.1.11.1.10 dateandtime read-only
This object contains the start time of the statistic.
                   hh3cNqaStatResInterval 1.3.6.1.4.1.25506.8.3.1.11.1.11 gauge32 read-only
This object contains the interval between two times of statistic.
                   hh3cNqaStatResRttNumDisconnects 1.3.6.1.4.1.25506.8.3.1.11.1.12 counter32 read-only
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
                   hh3cNqaStatResRttTimeouts 1.3.6.1.4.1.25506.8.3.1.11.1.13 counter32 read-only
The number of times that a probe failed because the probe timed out.
                   hh3cNqaStatResRttBusies 1.3.6.1.4.1.25506.8.3.1.11.1.14 counter32 read-only
The number of times that a NQA probe failed because errors related to sockets.
                   hh3cNqaStatResRttNoConnections 1.3.6.1.4.1.25506.8.3.1.11.1.15 counter32 read-only
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
                   hh3cNqaStatResRttDrops 1.3.6.1.4.1.25506.8.3.1.11.1.16 counter32 read-only
The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources.
                   hh3cNqaStatResRttSequenceErrors 1.3.6.1.4.1.25506.8.3.1.11.1.17 counter32 read-only
The number of packets arrived out of sequence.
                   hh3cNqaStatResRttErrors 1.3.6.1.4.1.25506.8.3.1.11.1.18 counter32 read-only
The number of other errors.
                   hh3cNqaStatResLostPacketRatio 1.3.6.1.4.1.25506.8.3.1.11.1.19 gauge32 read-only
The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent packets of total sent packets.
                   hh3cNqaStatResPacketLateArrival 1.3.6.1.4.1.25506.8.3.1.11.1.20 counter32 read-only
The value of this object reflects the number of the packets that arrived after the timeout.
                   hh3cNqaStatResRttSum 1.3.6.1.4.1.25506.8.3.1.11.1.21 counter32 read-only
This object contains the sum of the squares for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have been received.
                   hh3cNqaStatResNumOfDelaySD 1.3.6.1.4.1.25506.8.3.1.11.1.22 counter32 read-only
The number of one way times from source to destination that are successfully measured.
                   hh3cNqaStatResMinDelaySD 1.3.6.1.4.1.25506.8.3.1.11.1.23 gauge32 read-only
The minimum one way times from source to destination.
                   hh3cNqaStatResMaxDelaySD 1.3.6.1.4.1.25506.8.3.1.11.1.24 gauge32 read-only
The maximum one way times from source to destination.
                   hh3cNqaStatResSumDelaySD 1.3.6.1.4.1.25506.8.3.1.11.1.25 counter32 read-only
The sum of one way times from source to destination.
                   hh3cNqaStatResSum2DelaySD 1.3.6.1.4.1.25506.8.3.1.11.1.26 counter32 read-only
The sum of squares of one way times from source to destination.
                   hh3cNqaStatResNumOfDelayDS 1.3.6.1.4.1.25506.8.3.1.11.1.27 counter32 read-only
The number of one way times from destination to source that are successfully measured.
                   hh3cNqaStatResMinDelayDS 1.3.6.1.4.1.25506.8.3.1.11.1.28 gauge32 read-only
The minimum one way times from destination to source.
                   hh3cNqaStatResMaxDelayDS 1.3.6.1.4.1.25506.8.3.1.11.1.29 gauge32 read-only
The maximum one way times from destination to source.
                   hh3cNqaStatResSumDelayDS 1.3.6.1.4.1.25506.8.3.1.11.1.30 counter32 read-only
The sum of one way times from destination to source.
                   hh3cNqaStatResSum2DelayDS 1.3.6.1.4.1.25506.8.3.1.11.1.31 counter32 read-only
The sum of squares of one way times from destination to source.
         hh3cNqaGroupStatsJitterTable 1.3.6.1.4.1.25506.8.3.1.12 no-access
Test Group Statistic table for jitter activity in a statistic cycle. The statistic cycle is the value of hh3cNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that a probe statistics result (Hh3cNqaStatisticsResultsEntry) belongs to.
               hh3cNqaGroupStatsJitterEntry 1.3.6.1.4.1.25506.8.3.1.12.1 no-access
An entry contains the group statistic information for jitter activity. This entry is created only if the pingCtlType is hh3cNqajitter.
                   hh3cNqaStatJitterIndex 1.3.6.1.4.1.25506.8.3.1.12.1.1 unsigned32 no-access
An entry in this table is created when the statistic result of a NQA probe in a statistic cycle is determined. An implementation MUST start assigning hh3cNqaStatJitterIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
                   hh3cNqaStatJitterMinOfPosSD 1.3.6.1.4.1.25506.8.3.1.12.1.2 gauge32 read-only
The value of time that records the minimal positive jitter value from source to destination in jitter test.
                   hh3cNqaStatJitterMaxOfPosSD 1.3.6.1.4.1.25506.8.3.1.12.1.3 gauge32 read-only
The value of time that records the maximal positive jitter value from source to destination in the jitter test.
                   hh3cNqaStatJitterNumOfPosSD 1.3.6.1.4.1.25506.8.3.1.12.1.4 counter32 read-only
The number that records positive jitter times from source to destination in the jitter test. The total number of all positive jitter values in packets sent from source to destination.
                   hh3cNqaStatJitterSumOfPosSD 1.3.6.1.4.1.25506.8.3.1.12.1.5 counter32 read-only
The value of time that records the sum of positive jitter values from source to destination in the jitter test.
                   hh3cNqaStatJitterSumOfSquarePosSD 1.3.6.1.4.1.25506.8.3.1.12.1.6 counter32 read-only
The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
                   hh3cNqaStatJitterMinOfNegSD 1.3.6.1.4.1.25506.8.3.1.12.1.7 gauge32 read-only
The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
                   hh3cNqaStatJitterMaxOfNegSD 1.3.6.1.4.1.25506.8.3.1.12.1.8 gauge32 read-only
The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
                   hh3cNqaStatJitterNumOfNegSD 1.3.6.1.4.1.25506.8.3.1.12.1.9 counter32 read-only
The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values sent from source to destination.
                   hh3cNqaStatJitterSumOfNegSD 1.3.6.1.4.1.25506.8.3.1.12.1.10 counter32 read-only
The value of time that records the sum of negative jitter values from source to destination in the jitter test.
                   hh3cNqaStatJitterSumOfSquareNegSD 1.3.6.1.4.1.25506.8.3.1.12.1.11 counter32 read-only
The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
                   hh3cNqaStatJitterMinOfPosDS 1.3.6.1.4.1.25506.8.3.1.12.1.12 gauge32 read-only
The value of time that records the minimal positive jitter value from destination to source in the jitter test.
                   hh3cNqaStatJitterMaxOfPosDS 1.3.6.1.4.1.25506.8.3.1.12.1.13 gauge32 read-only
The value of time that records the maximal positive jitter value from destination to source in the jitter test.
                   hh3cNqaStatJitterNumOfPosDS 1.3.6.1.4.1.25506.8.3.1.12.1.14 counter32 read-only
The number that records positive jitter times from destination to source in the jitter test.
                   hh3cNqaStatJitterSumOfPosDS 1.3.6.1.4.1.25506.8.3.1.12.1.15 counter32 read-only
The value of time that records the sum of positive jitter values from destination to source in the jitter test.
                   hh3cNqaStatJitterSumOfSquarePosDS 1.3.6.1.4.1.25506.8.3.1.12.1.16 counter32 read-only
The value of time that records the sum of square of positive jitter values destination to source in the jitter test.
                   hh3cNqaStatJitterMinOfNegDS 1.3.6.1.4.1.25506.8.3.1.12.1.17 gauge32 read-only
The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
                   hh3cNqaStatJitterMaxOfNegDS 1.3.6.1.4.1.25506.8.3.1.12.1.18 gauge32 read-only
The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
                   hh3cNqaStatJitterNumOfNegDS 1.3.6.1.4.1.25506.8.3.1.12.1.19 counter32 read-only
The number that records negative jitter times from destination to source in the jitter test.
                   hh3cNqaStatJitterSumOfNegDS 1.3.6.1.4.1.25506.8.3.1.12.1.20 counter32 read-only
The value of time that records the sum of negative jitter values from destination to source in the jitter test.
                   hh3cNqaStatJitterSumOfSquareNegDS 1.3.6.1.4.1.25506.8.3.1.12.1.21 counter32 read-only
The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
                   hh3cNqaStatJitterPacketLossSD 1.3.6.1.4.1.25506.8.3.1.12.1.22 counter32 read-only
The lost packets number sent from source to destination.
                   hh3cNqaStatJitterPacketLossDS 1.3.6.1.4.1.25506.8.3.1.12.1.23 counter32 read-only
The lost packets number sent from destination to source.
                   hh3cNqaStatJitterAvePosSD 1.3.6.1.4.1.25506.8.3.1.12.1.24 gauge32 read-only
The value of time that records the average positive jitter value from source to destination.
                   hh3cNqaStatJitterAveNegSD 1.3.6.1.4.1.25506.8.3.1.12.1.25 gauge32 read-only
The value of time that records the average negative jitter value from source to destination.
                   hh3cNqaStatJitterAvePosDS 1.3.6.1.4.1.25506.8.3.1.12.1.26 gauge32 read-only
The value of time that records the average positive jitter value from destination to source.
                   hh3cNqaStatJitterAveNegDS 1.3.6.1.4.1.25506.8.3.1.12.1.27 gauge32 read-only
The value of time that records the average negative jitter value from destination to source.
                   hh3cNqaStatJitterPktLossUnknown 1.3.6.1.4.1.25506.8.3.1.12.1.28 counter32 read-only
The number of packets which is lost with unknown reason.
                   hh3cNqaStatJitterMaxOfICPIF 1.3.6.1.4.1.25506.8.3.1.12.1.29 gauge32 read-only
The maximum of all ICPIF values in a statistic cycle for jitter test.
                   hh3cNqaStatJitterMinOfICPIF 1.3.6.1.4.1.25506.8.3.1.12.1.30 gauge32 read-only
The minimum of all ICPIF values in a statistic cycle for jitter test.
                   hh3cNqaStatJitterMaxOfMOS 1.3.6.1.4.1.25506.8.3.1.12.1.31 gauge32 read-only
The maximum of all MOS values in a statistic cycle for jitter test.
                   hh3cNqaStatJitterMinOfMOS 1.3.6.1.4.1.25506.8.3.1.12.1.32 gauge32 read-only
The minimum of all MOS values in a statistic cycle for jitter test.
         hh3cNqaReactionTable 1.3.6.1.4.1.25506.8.3.1.13 no-access
A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted.
               hh3cNqaReactionEntry 1.3.6.1.4.1.25506.8.3.1.13.1 no-access
Defines an entry in the hh3cNqaReactionTable. The first two index elements identify the pingCtlEntry that a hh3cNqaReactItemIndex belongs to. The third index element selects a single reaction.
                   hh3cNqaReactOwnerIndex 1.3.6.1.4.1.25506.8.3.1.13.1.1 snmpadminstring no-access
The first index of hh3cNqaReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. hh3cNqaReactOwnerIndex and hh3cNqaReactTestName identify an existed test.
                   hh3cNqaReactTestName 1.3.6.1.4.1.25506.8.3.1.13.1.2 snmpadminstring no-access
The second index of hh3cNqaReactionTable, it is the same as pingCtlTestName in pingCtlTable. hh3cNqaReactOwnerIndex and hh3cNqaReactTestName identify an existed test.
                   hh3cNqaReactItemIndex 1.3.6.1.4.1.25506.8.3.1.13.1.3 unsigned32 no-access
The third index of hh3cNqaReactionTable, it definitely identifies one of the reaction configurations for a test.
                   hh3cNqaReactCheckedElement 1.3.6.1.4.1.25506.8.3.1.13.1.4 integer read-only
A list of reaction condition type. 'probetime' and 'probefailure' are valid when pingCtlType of the test is not hh3cNqajitter. 'jitterOwdSD': one way time from source to destination in jitter test. 'jitterOwdDS': one way time from destination to source in jitter test. 'jitterrtt', 'jitterpacketloss', 'jittersd', 'jitterds', 'jitterOwdSD' and 'jitterOwdDS' are valid when pingCtlType of the test is hh3cNqajitter. 'icpif' and 'mos' are valid when pingCtlType of the test is hh3cNqajitter and hh3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'. Enumeration: 'icpif': 7, 'jitterrtt': 3, 'mos': 8, 'probetime': 1, 'jittersd': 5, 'probefailure': 2, 'jitterOwdSD': 9, 'jitterOwdDS': 10, 'jitterpacketloss': 4, 'jitterds': 6.
                   hh3cNqaReactThresholdUpperLimit 1.3.6.1.4.1.25506.8.3.1.13.1.5 unsigned32 read-only
This object defines an administrative upper-threshold value for hh3cNqaReactCheckedElement. The value of this object is zero if hh3cNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.
                   hh3cNqaReactThresholdLowerLimit 1.3.6.1.4.1.25506.8.3.1.13.1.6 unsigned32 read-only
This object defines an administrative lower-threshold value for hh3cNqaReactCheckedElement. The value of hh3cNqaReactThresholdLowerLimit should be equal or less than the value of hh3cNqaReactThresholdUpperLimit. The value of this object is zero if hh3cNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.
                   hh3cNqaReactThresholdType 1.3.6.1.4.1.25506.8.3.1.13.1.7 integer read-only
This object defines the reaction threshold types. invalid(0): Invalid value. average(1): If reaction threshold type is average and the average value of watched operation exceeds threshold limit, an action specified in hh3cNqaReactActionType is generated when hh3cNqaReactCurrentStatus changes. consecutive(2): If reaction threshold type is consecutive and the times of watched operation consecutively exceeds the limit specified by hh3cNqaReactThresholdConsecNum, an action specified in hh3cNqaReactActionType is generated when hh3cNqaReactCurrentStatus changes. accumulative(3): If reaction threshold type is accumulative and the times of watched operation accumulatively exceeds the limit specified by hh3cNqaReactThresholdAccumNum, an action specified in hh3cNqaReactActionType is generated when hh3cNqaReactCurrentStatus changes. If reaction threshold type is not configured, the value of this object is 'invalid'. Enumeration: 'consecutive': 2, 'average': 1, 'accumulative': 3, 'invalid': 0.
                   hh3cNqaReactThresholdConsecNum 1.3.6.1.4.1.25506.8.3.1.13.1.8 unsigned32 read-only
This object defines a consecutive threshold limit. The value is zero when hh3cNqaReactThresholdType is not 'consecutive'.
                   hh3cNqaReactThresholdAccumNum 1.3.6.1.4.1.25506.8.3.1.13.1.9 unsigned32 read-only
This object defines an accumulative threshold limit. The value is zero when the hh3cNqaReactThresholdType is not 'accumulative'.
                   hh3cNqaReactActionType 1.3.6.1.4.1.25506.8.3.1.13.1.10 integer read-only
Specifies the type of reaction to generate if the specified violation type occurs for the monitored element: none - No reaction is generated trapOnly - A trap is generated triggerOnly - All trigger actions defined for this entry are generated trapAndTrigger - Both a trap and all trigger actions are generated Enumeration: 'triggerOnly': 2, 'none': 0, 'trapAndTrigger': 3, 'trapOnly': 1.
                   hh3cNqaReactCurrentStatus 1.3.6.1.4.1.25506.8.3.1.13.1.11 integer read-only
Specifies the current status of this reaction entry: invalid - Specifies the reaction entry status is uncertain. overThreshold - Specifies the reaction entry has met the hh3cNqaReactThresholdType and the threshold value. belowThreshold - Specifies the reaction entry has disobeyed the hh3cNqaReactThresholdType and the threshold value. Enumeration: 'overThreshold': 2, 'belowThreshold': 3, 'invalid': 1.
                   hh3cNqaReactRowStatus 1.3.6.1.4.1.25506.8.3.1.13.1.12 rowstatus read-only
This object allows entries to be created and deleted in the hh3cNqaReactionTable. Creation of an entry in this table results in a new set of reaction configurations which take effect immediately. Deletion of an entry in this table results in corresponding reaction configurations are being deleted and stop taking effect.
                   hh3cNqaReactCheckedNum 1.3.6.1.4.1.25506.8.3.1.13.1.13 unsigned32 read-only
The number of checked element samples that are monitored.
                   hh3cNqaReactThresholdNum 1.3.6.1.4.1.25506.8.3.1.13.1.14 unsigned32 read-only
The number of checked element samples that are over threshold.
         hh3cNqaStatisticsReactionTable 1.3.6.1.4.1.25506.8.3.1.14 no-access
A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted.
               hh3cNqaStatisticsReactionEntry 1.3.6.1.4.1.25506.8.3.1.14.1 no-access
Defines an entry in the hh3cNqaStatisticsReactionTable. The first two index elements identify the pingCtlEntry that a hh3cNqaReactItemIndex belongs to. The third index element identifies an entry in the hh3cNqaStatisticsResultsTable. The forth index element selects a single reaction.
                   hh3cNqaStatReactOwnerIndex 1.3.6.1.4.1.25506.8.3.1.14.1.1 snmpadminstring no-access
The first index of hh3cNqaStatisticsReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable.
                   hh3cNqaStatReactTestName 1.3.6.1.4.1.25506.8.3.1.14.1.2 snmpadminstring no-access
The second index of hh3cNqaStatisticsReactionTable, it is the same as pingCtlTestName in pingCtlTable.
                   hh3cNqaStatReactIndex 1.3.6.1.4.1.25506.8.3.1.14.1.3 unsigned32 no-access
The third index of hh3cNqaStatisticsReactionTable. An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hh3cNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
                   hh3cNqaStatReactItemIndex 1.3.6.1.4.1.25506.8.3.1.14.1.4 unsigned32 no-access
The forth index of hh3cNqaStatisticsReactionTable, it definitely identifies one of the reaction configurations for a test
                   hh3cNqaStatReactCheckedNum 1.3.6.1.4.1.25506.8.3.1.14.1.5 counter32 read-only
The number of checked element samples that are monitored.
                   hh3cNqaStatReactThresholdNum 1.3.6.1.4.1.25506.8.3.1.14.1.6 counter32 read-only
The number of checked element samples that are over threshold.
     hh3cNqaImplementationTypeDomains 1.3.6.1.4.1.25506.8.3.2
         hh3cNqaUdpEcho 1.3.6.1.4.1.25506.8.3.2.1
Indicates that an implementation is using the UDP based echo server. Notes: The hh3cNqaCtlTargetPort and hh3cNqaCtlSourcePort need to be set, while in the pingUdpEcho Node, hh3cNqaCtlTargetPort must be set to the default value.
         hh3cNqaTcpconnect 1.3.6.1.4.1.25506.8.3.2.2
Indicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The hh3cNqaCtlTargetPort and hh3cNqaCtlSourcePort need to be set, while in the pingTcpConnectionAttempt Node, hh3cNqaCtlTargetPort must be set to the default value.
         hh3cNqajitter 1.3.6.1.4.1.25506.8.3.2.3
Indicates that an implementation is using udp for packet transfers. 'jitter' will cause the NQA(Network Quality Analysis) application to perform delay variance analysis.
         hh3cNqaHttp 1.3.6.1.4.1.25506.8.3.2.4
Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP Server. It causes the NQA application to perform a download of the object specified in the URL.
         hh3cNqadlsw 1.3.6.1.4.1.25506.8.3.2.5
Indicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the NQA application to perform a keepalive operation to measure the response time of a DLSw peer.
         hh3cNqadhcp 1.3.6.1.4.1.25506.8.3.2.6
Indicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the NQA application to perform an IP Address lease request/teardown operation.
         hh3cNqaftp 1.3.6.1.4.1.25506.8.3.2.7
Indicates that an implementation is using tcp packet for ftp connect and data transfer.
     hh3cNqaNotifications 1.3.6.1.4.1.25506.8.3.3
         hh3cNqaProbeTimeOverThreshold 1.3.6.1.4.1.25506.8.3.3.1
It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. Probe time(equals to RTT for some type of tests) is not in the range hh3cNqaReactThresholdLowerLimit through hh3cNqaReactThresholdUpperLimit. 2. The probe time is accumulatively not in the range hh3cNqaReactThresholdLowerLimit through hh3cNqaReactThresholdUpperLimit for a number of times specified in hh3cNqaReactThresholdAccumNum. 3. The probe time is consecutively in the range hh3cNqaReactThresholdLowerLimit through hh3cNqaReactThresholdUpperLimit for a number of times specified in hh3cNqaReactThresholdConsecNum. This notification is valid only when hh3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hh3cNqajitter.
         hh3cNqaJitterRTTOverThreshold 1.3.6.1.4.1.25506.8.3.3.2
It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average NQA round-trip-time (RTT) of jitter packets is not in the range hh3cNqaReactThresholdLowerLimit through hh3cNqaReactThresholdUpperLimit. 2. The RTT of jitter packets is accumulatively not in the range hh3cNqaReactThresholdLowerLimit through hh3cNqaReactThresholdUpperLimit for a number of times specified in hh3cNqaReactThresholdAccumNum in one test. This notification is valid only when hh3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hh3cNqajitter.
         hh3cNqaProbeFailure 1.3.6.1.4.1.25506.8.3.3.3
It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the probe test accumulatively failed for a number of times specified in hh3cNqaReactThresholdAccumNum in one test while the value of hh3cNqaReactThresholdType is 'accumulative'. 2. When the probe test consecutively failed for a number of times specified in hh3cNqaReactThresholdConsecNum in one test while the value of hh3cNqaReactThresholdType is 'consecutive'. This notification is valid only when hh3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hh3cNqajitter.
         hh3cNqaJitterPacketLoss 1.3.6.1.4.1.25506.8.3.3.4
It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the jitter packets accumulatively lost for a number of times specified in hh3cNqaReactThresholdAccumNum in one test while the value of hh3cNqaReactThresholdType is 'accumulative'. This notification is valid only when hh3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hh3cNqajitter.
         hh3cNqaJitterSDOverThreshold 1.3.6.1.4.1.25506.8.3.3.5
The SD means the jitter values from source to destination. It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of SD in one jitter test is not in the range hh3cNqaReactThresholdLowerLimit through hh3cNqaReactThresholdUpperLimit and the hh3cNqaReactThresholdType is specified as 'average' type. 2. The average of SD in one jitter test is accumulatively not in the range hh3cNqaReactThresholdLowerLimit through hh3cNqaReactThresholdUpperLimit for a number of times specified in hh3cNqaReactThresholdAccumNum and the hh3cNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when hh3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hh3cNqajitter.
         hh3cNqaJitterDSOverThreshold 1.3.6.1.4.1.25506.8.3.3.6
The DS means the jitter values from destination to source. It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of DS in one jitter test is not in the range hh3cNqaReactThresholdLowerLimit through hh3cNqaReactThresholdUpperLimit and the hh3cNqaReactThresholdType is specified as 'average' type. 2. The average of DS in one jitter test is accumulatively not in the range hh3cNqaReactThresholdLowerLimit through hh3cNqaReactThresholdUpperLimit for a number of times specified in hh3cNqaReactThresholdAccumNum and the hh3cNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when hh3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hh3cNqajitter.
         hh3cNqaICPIFOverThreshold 1.3.6.1.4.1.25506.8.3.3.7
It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the ICPIF value in one jitter test is not in the range hh3cNqaReactThresholdLowerLimit through hh3cNqaReactThresholdUpperLimit. This notification is valid only when hh3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is hh3cNqajitter and hh3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
         hh3cNqaMOSOverThreshold 1.3.6.1.4.1.25506.8.3.3.8
It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the MOS value in one jitter test is not in the range hh3cNqaReactThresholdLowerLimit through hh3cNqaReactThresholdUpperLimit. This notification is valid only when hh3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is hh3cNqajitter and hh3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.