HH3C-MPLS-LDP-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-MPLS-LDP-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cMplsLdp 1.3.6.1.4.1.25506.8.12.2
All rights reserved
     hh3cMplsLdpObjects 1.3.6.1.4.1.25506.8.12.2.1
         hh3cMplsLdpLsrObjects 1.3.6.1.4.1.25506.8.12.2.1.1
             hh3cMplsLdpLsrIncarnTable 1.3.6.1.4.1.25506.8.12.2.1.1.1 no-access
H3CMPLS provides support for multiple incarnations of the MPLS Stack in a target. The LSR defined in the standard MIB is treated as an incarnation in this MIB. Using a local policy the Network administrator must group the LDP Entities that should be placed in an incarnation.
                 hh3cMplsLdpLsrIncarnEntry 1.3.6.1.4.1.25506.8.12.2.1.1.1.1 no-access
An entry in this table represents an LSR incarnation. All the entries in this table are created initially when the LDP is initiated. The row status of each entry will be in 'notInService' state initially. The row status must be set to 'active' after the necessary configurations are complete with respect to an incarnation. Currenlty the LSR ID of the incarnation is the only mandatory parameter that must be set before the rowStatus is set to 'active'. An LSR Incarnation Entity is uniquely indexed by its Incarnation Identifier.
                     hh3cMplsLdpLsrID 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.1 mplslsridentifier read-write
The LSR's Identifier.
                     hh3cMplsLdpLsrLoopDetectionPresent 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.2 truthvalue read-only
A indication of whether this LSR supports loop detection. A value of 'true' indicates this LSR does support loop detection. A value of 'false' indicates this LSR does not support loop detection.
                     hh3cMplsLdpLsrLoopDetectionAdminStatus 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.3 integer read-write
To enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value to 'disabled(2)'. Enumeration: 'disabled': 2, 'enabled': 1.
                     hh3cMplsLdpLsrPathVectorLimit 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.4 integer read-write
This object only has meaning if hh3cMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit of path vectors which this LSR uses to treat the message as if it had traversed a loop.
                     hh3cMplsLdpLsrHopCountLimit 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.5 integer read-write
This object only has meaning if hh3cMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit on the Hop Count which this LSR uses to treat the message as if it had traversed a loop.
                     hh3cMplsLdpLsrLoopPreventionPresent 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.6 truthvalue read-only
A indication of whether this LSR supports loop prevention. A value of 'true' indicates this LSR does support loop prevention. A value of 'false' indicates this LSR does not support loop prevention. Current release of H3CMPLS does not provide support to assign this MIB object with a value 'true'.
                     hh3cMplsLdpLsrLoopPreventionAdminStatus 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.7 integer read-write
To enable loop prevention the value of this object should be 'enabled(1)'. Otherwise, to turn off loop prevention, set this value to 'disabled(2)'. Current release of H3CMPLS does not provide support to assign this MIB object with a value 'enabled'. Enumeration: 'disabled': 2, 'enabled': 1.
                     hh3cMplsLdpLsrLabelRetentionMode 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.8 integer read-write
The LSR can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be used to forward packets, i.e. if label came from a valid next hop. If the value of this object is liberal(2) then all advertized label mappings are retained whether they are from a valid next hop or not. Current release of H3CMPLS does not provide support to assign this MIB object with a value 'liberal'. Enumeration: 'liberal': 2, 'conservative': 1.
                     hh3cMplsLdpLsrIncarnID 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.9 integer read-only
The incarnation acts as index to all the elements in this table.
                     hh3cMplsLdpLsrMaxLdpEntities 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.10 integer read-write
The maximum number of LDP entities that can be supported by this Incarnation.
                     hh3cMplsLdpLsrMaxLocalPeers 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.11 integer read-write
The maximum number of Local LDP peers that can be supported by this Incarnation.
                     hh3cMplsLdpLsrMaxRemotePeers 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.12 integer read-write
The maximum number of Remote LDP peers that can be supported by this Incarnation.
                     hh3cMplsLdpLsrMaxIfaces 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.13 integer read-write
The maximum number of Label enabled Interfaces that can be supported by this Incarnation.
                     hh3cMplsLdpLsrMaxLsps 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.14 integer read-write
The maximum number of Label Switched Paths that can be supported by this Incarnation.
                     hh3cMplsLdpLsrMaxCrlspTnls 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.15 integer read-write
The maximum number of CRLSPs that can be supported by this Incarnation.
                     hh3cMplsLdpLsrMaxErhopPerCrlspTnl 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.16 integer read-write
The maximum number of ER-Hops that can be supported in a CRLSP tunnel.
                     hh3cMplsLdpLsrRowStatus 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.17 rowstatus read-only
An object that allows entries in this table to be created and deleted using the RowStatus convention.
                     hh3cMplsLdpLsrMaxVcmCapability 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.18 integer read-write
                     hh3cMplsLdpLsrVcmPathVecInAllLblMapPresent 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.19 truthvalue read-write
                     hh3cMplsLdpLsrRequestRetrytimerValue 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.20 integer read-write
                     hh3cMplsLdpLsrNumOfRequestRetryAttempts 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.21 integer read-write
         hh3cMplsLdpEntityObjects 1.3.6.1.4.1.25506.8.12.2.1.2
             hh3cMplsLdpEntityTable 1.3.6.1.4.1.25506.8.12.2.1.2.1 no-access
This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR).
                 hh3cMplsLdpEntityEntry 1.3.6.1.4.1.25506.8.12.2.1.2.1.1 no-access
An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An LPD Entity is uniquely indexed by its LPD Identifier.
                     hh3cMplsLdpEntityID 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.1 mplsldpidentifier no-access
The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR.
                     hh3cMplsLdpEntityLabelSpaceType 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.2 integer read-only
The type of label spaces associated with this LDP Entity. The values are 'unknown(1)' The type of label space is not known. 'perInterface(2)' The type of label space is tied to an interface. 'perPlatform(3)' The type of label space is tied to the platform. Enumeration: 'unknown': 1, 'perPlatform': 3, 'perInterface': 2.
                     hh3cMplsLdpEntityDefVpi 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.3 atmvpidentifier read-only
The Default VPI value used in the label for the default VPI.
                     hh3cMplsLdpEntityDefVci 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.4 atmvcidentifier read-only
The Default VCI value used in the label for the default VCI.
                     hh3cMplsLdpEntityUnlabTrafVpi 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.5 atmvpidentifier read-only
VPI value of the VCC supporting unlabeled traffic.
                     hh3cMplsLdpEntityUnlabTrafVci 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.6 atmvcidentifier read-only
VCI value of the VCC supporting unlabeled traffic.
                     hh3cMplsLdpEntityMergeCapability 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.7 integer read-only
Sets the merge capability for this LDP entity. Current Release of H3CMPLS does not provide support for any kind of Merge. Enumeration: 'noMerge': 0, 'vpVcMerge': 3, 'vcMerge': 2, 'vpMerge': 1.
                     hh3cMplsLdpEntityVcDirectionality 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.8 integer read-only
Sets the VC directionality for this LDP entity. Enumeration: 'bidirectional': 1, 'unidirectional': 2.
                     hh3cMplsLdpEntityWellKnownDiscoveryPort 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.9 integer read-only
The well known LDP Discovery Port.
                     hh3cMplsLdpEntityMtu 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.10 integer read-only
The maximum transmission unit (MTU) that was configured for this entity.
                     hh3cMplsLdpEntityKeepAliveHoldTimer 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.11 integer read-only
The two octet value which is the proposed keep alive hold timer for this LDP Entity.
                     hh3cMplsLdpEntityFailedInitSessionThreshold 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.12 integer read-only
When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero).
                     hh3cMplsLdpEntityLabelDistributionMethod 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.13 integer read-only
For any given LDP session, the method of label distribution must be specified. Current release of H3CMPLS does not provide support for 'downstreamUnsolicited'. Enumeration: 'downstreamOnDemand': 1, 'downstreamUnsolicited': 2.
                     hh3cMplsLdpEntityLabelAllocationMethod 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.14 integer read-only
For any given LDP session, the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode. Enumeration: 'independent': 2, 'ordered': 1.
                     hh3cMplsLdpEntityHelloHoldTimer 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.15 integer read-only
The two octet value which is the proposed hello hold timer for this LDP Entity.
                     hh3cMplsLdpEntityRowStatus 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.16 rowstatus read-only
An object that allows entries in this table to be created and deleted using the RowStatus convention.
             hh3cMplsLdpEntityIfTable 1.3.6.1.4.1.25506.8.12.2.1.2.2 no-access
This table contains information about the interfaces that are associated with an LDP Entity. There should be atleast one interface associated with each LDP Entity. If the LDP Entity supports 'per interface based label space' label type then, atmost one interface can be associated with the LDP entity. If the LDP Entity supports 'per platform based label space' label type then, more than one interface can be associated with the LDP Entity.
                 hh3cMplsLdpEntityIfEntry 1.3.6.1.4.1.25506.8.12.2.1.2.2.1 no-access
An entry in this table represents an Interface that is associated with a LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An interface (row in this table) can be created/deleted only when the associted LDP Entity row status has the value notInService or notReady.
                     hh3cMplsLdpEntityIfIndex 1.3.6.1.4.1.25506.8.12.2.1.2.2.1.1 unsigned32 no-access
Identifier that uniquely identifies the Interface with respect to an LDP Entity. The ifIndex value corresponds to the IfIndex value of the MIB-II
                     hh3cMplsLdpEntityIfIpv4Address 1.3.6.1.4.1.25506.8.12.2.1.2.2.1.2 ipaddress read-only
The IPv4 address associated with the interface.
                     hh3cMplsLdpEntityIfRowStatus 1.3.6.1.4.1.25506.8.12.2.1.2.2.1.3 rowstatus read-only
An object that allows entries in this table to be created and deleted using the RowStatus convention.
             hh3cMplsLdpEntityConfAtmLabelRangeTable 1.3.6.1.4.1.25506.8.12.2.1.2.3 no-access
The MPLS LDP Entity Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Entities. LDP Entities which use ATM must have at least one entry in this table.
                 hh3cMplsLdpEntityConfAtmLabelRangeEntry 1.3.6.1.4.1.25506.8.12.2.1.2.3.1 no-access
A row in the LDP Entity Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Entity are UNIQUE and non-overlapping. For example, for a specific LDP Entity index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP EntityID and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Entity MUST include the default VPI/VCI values denoted in the LDP Entity Table.
                     hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVPI 1.3.6.1.4.1.25506.8.12.2.1.2.3.1.1 atmvpidentifier no-access
The minimum VPI number configured for this range.
                     hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVCI 1.3.6.1.4.1.25506.8.12.2.1.2.3.1.2 atmvcidentifier no-access
The minimum VCI number configured for this range.
                     hh3cMplsLdpEntityConfAtmLabelRangeUpperBoundVPI 1.3.6.1.4.1.25506.8.12.2.1.2.3.1.3 atmvpidentifier read-only
The maximum VPI number configured for this range.
                     hh3cMplsLdpEntityConfAtmLabelRangeUpperBoundVCI 1.3.6.1.4.1.25506.8.12.2.1.2.3.1.4 atmvcidentifier read-only
The maximum VCI number configured for this range.
                     hh3cMplsLdpEntityConfAtmLabelRangeRowStatus 1.3.6.1.4.1.25506.8.12.2.1.2.3.1.5 rowstatus read-only
An object that allows entries in this table to be created and deleted using the RowStatus convention.
             hh3cMplsLdpEntityStatsTable 1.3.6.1.4.1.25506.8.12.2.1.2.4 no-access
This table is a read-only table which augments the MplsLdpConfEntityTable. The purpose of this table is to keep statistical information about the LDP Entities on the LSR.
                 hh3cMplsLdpEntityStatsEntry 1.3.6.1.4.1.25506.8.12.2.1.2.4.1 no-access
A row in this table contains statistical information about an LDP Entity.
                     hh3cMplsLdpAttemptedSessions 1.3.6.1.4.1.25506.8.12.2.1.2.4.1.1 counter32 read-only
A count of the total attempted sessions for this LDP Entity.
         hh3cMplsLdpPeerObjects 1.3.6.1.4.1.25506.8.12.2.1.3
             hh3cMplsLdpPeerTable 1.3.6.1.4.1.25506.8.12.2.1.3.1 no-access
Information about LDP peers which have been discovered by the LDP Entities that are managed by this agent.
                 hh3cMplsLdpPeerEntry 1.3.6.1.4.1.25506.8.12.2.1.3.1.1 no-access
Information about a single Peer.
                     hh3cMplsLdpPeerIndex 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.1 unsigned32 no-access
An identifier for the LDP peer that is unique within the scope of this agent.
                     hh3cMplsLdpPeerID 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.2 mplsldpidentifier read-only
The LDP identifier of this LDP Peer.
                     hh3cMplsLdpPeerInternetworkAddrType 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.3 addressfamilynumbers read-only
The type of the internetwork layer address of this LDP peer. This object indicates how the value of hh3cMplsLdpPeerInternetworkAddr is to be interpreted.
                     hh3cMplsLdpPeerInternetworkAddr 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.4 mplsldpgenaddr read-only
The value of the internetwork layer address of this LDP peer.
                     hh3cMplsLdpPeerDefaultMtu 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.5 integer read-only
The default maximum transmission unit (MTU) of the LDP Peer.
                     hh3cMplsLdpPeerKeepAliveHoldTimer 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.6 integer read-only
The two octet unsigned non zero INTEGER that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval.
                     hh3cMplsLdpPeerLabelDistributionMethod 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.7 integer read-only
For any given LDP session, the method of label distribution must be specified. Enumeration: 'downstreamOnDemand': 1, 'downstreamUnsolicited': 2.
                     hh3cMplsLdpPeerType 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.8 integer read-only
Indicates whether a peer is a local peer or a remote peer Enumeration: 'remote': 2, 'local': 1.
                     hh3cMplsLdpPeerRowStatus 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.9 rowstatus read-only
An object that allows entries in this table to be created and deleted using the RowStatus convention.
             hh3cMplsLdpPeerConfAtmLabelRangeTable 1.3.6.1.4.1.25506.8.12.2.1.3.2 no-access
The MPLS LDP Peer Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Peers. LDP Peers which use ATM must have at least one entry in this table.
                 hh3cMplsLdpPeerConfAtmLabelRangeEntry 1.3.6.1.4.1.25506.8.12.2.1.3.2.1 no-access
A row in the LDP Peer Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Peer are UNIQUE and non-overlapping. For example, for a specific LDP Peer index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP PeerIndex and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Peer MUST include the default VPI/VCI values denoted in the LDP Peer Table.
                     hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVPI 1.3.6.1.4.1.25506.8.12.2.1.3.2.1.1 atmvpidentifier no-access
The minimum VPI number configured for this range.
                     hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVCI 1.3.6.1.4.1.25506.8.12.2.1.3.2.1.2 atmvcidentifier no-access
The minimum VCI number configured for this range.
                     hh3cMplsLdpPeerConfAtmLabelRangeUpperBoundVPI 1.3.6.1.4.1.25506.8.12.2.1.3.2.1.3 atmvpidentifier read-only
The maximum VPI number configured for this range.
                     hh3cMplsLdpPeerConfAtmLabelRangeUpperBoundVCI 1.3.6.1.4.1.25506.8.12.2.1.3.2.1.4 atmvcidentifier read-only
The maximum VCI number configured for this range.
         hh3cMplsLdpSessionObjects 1.3.6.1.4.1.25506.8.12.2.1.4
             hh3cMplsLdpSessionTable 1.3.6.1.4.1.25506.8.12.2.1.4.1 no-access
A table of Sessions between the LDP Entities and LDP Peers.
                 hh3cMplsLdpSessionEntry 1.3.6.1.4.1.25506.8.12.2.1.4.1.1 no-access
An entry in this table represents information on a single session between an LDP Entity and LDP Peer.
                     hh3cMplsLdpSessionIndex 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.1 unsigned32 no-access
An unique identifier for this entry such that it identifies a specific LDP Session.
                     hh3cMplsLdpSessionID 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.2 mplsldpidentifier read-only
The LDP Session identifier.
                     hh3cMplsLdpSessionProtocolVersion 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.3 integer read-only
The version of the LDP Protocol which this session is using.
                     hh3cMplsLdpSessionKeepAliveHoldTimeRemaining 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.4 timeinterval read-only
The keep alive hold time remaining for this session.
                     hh3cMplsLdpSessionRole 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.5 integer read-only
An indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role. Enumeration: 'active': 1, 'passive': 2.
                     hh3cMplsLdpSessionState 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.6 integer read-only
The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior. Enumeration: 'initialized': 2, 'opensent': 4, 'openrec': 3, 'nonexistent': 1, 'operational': 5.
                     hh3cMplsLdpSessionAtmLabelRangeLowerBoundVPI 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.7 atmvpidentifier read-only
The minimum VPI number for this range.
                     hh3cMplsLdpSessionAtmLabelRangeLowerBoundVCI 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.8 atmvcidentifier read-only
The minimum VCI number for this range.
                     hh3cMplsLdpSessionAtmLabelRangeUpperBoundVPI 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.9 atmvpidentifier read-only
The maximum VPI number for this range.
                     hh3cMplsLdpSessionAtmLabelRangeUpperBoundVCI 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.10 atmvcidentifier read-only
The maximum VCI number for this range.
         hh3cMplsLdpHelloAdjacencyObjects 1.3.6.1.4.1.25506.8.12.2.1.5
             hh3cMplsLdpHelloAdjacencyTable 1.3.6.1.4.1.25506.8.12.2.1.5.1 no-access
A table of Hello Adjacencies for Sessions.
                 hh3cMplsLdpHelloAdjacencyEntry 1.3.6.1.4.1.25506.8.12.2.1.5.1.1 no-access
Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies.
                     hh3cMplsLdpHelloAdjacencyIndex 1.3.6.1.4.1.25506.8.12.2.1.5.1.1.1 unsigned32 no-access
An identifier for the adjacency.
                     hh3cMplsLdpHelloAdjacencyHoldTimeRemaining 1.3.6.1.4.1.25506.8.12.2.1.5.1.1.2 timeinterval read-only
The time remaining for this Hello Adjacency.
         hh3cMplsLdpCrlspTnlObjects 1.3.6.1.4.1.25506.8.12.2.1.6
             hh3cMplsLdpCrlspTnlTable 1.3.6.1.4.1.25506.8.12.2.1.6.1 no-access
The hh3cMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels to be created. The ER hops associated with a CRLSP tunnel are to be configured using the hh3cMplsLdpCrlspErHopTable.
                 hh3cMplsLdpCrlspTnlEntry 1.3.6.1.4.1.25506.8.12.2.1.6.1.1 no-access
An entry in this table represents an CRLSP MPLS tunnel. An entry can be created by a network administrator.
                     hh3cMplsLdpCrlspTnlIndex 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.1 mplstunnelindex no-access
Uniquely identifies this row.
                     hh3cMplsLdpCrlspTnlName 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.2 displaystring read-only
The 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port.
                     hh3cMplsLdpCrlspTnlDirection 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.3 integer read-only
Whether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional. Enumeration: 'out': 2, 'inOut': 3, 'in': 1.
                     hh3cMplsLdpCrlspTnlSignallingProto 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.4 integer read-only
The signaling protocol, if any, that set up this tunnel. Enumeration: 'none': 1, 'ldp': 2, 'rsvp': 3.
                     hh3cMplsLdpCrlspTnlSetupPrio 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.5 integer read-only
The setup priority of this tunnel.
                     hh3cMplsLdpCrlspTnlHoldingPrio 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.6 integer read-only
The holding priority for this tunnel.
                     hh3cMplsLdpCrlspTnlPeakDataRate 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.7 bitrate read-only
The peak rate - the maximum rate at which traffic will be sent on the CRLSP.
                     hh3cMplsLdpCrlspTnlPeakBurstSize 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.8 burstsize read-only
The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP.
                     hh3cMplsLdpCrlspTnlCommittedDataRate 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.9 bitrate read-only
The committed rate - the committed rate at which traffic will be sent on the CRLSP.
                     hh3cMplsLdpCrlspTnlCommittedBurstSize 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.10 burstsize read-only
The committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP.
                     hh3cMplsLdpCrlspTnlExcessBurstSize 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.11 burstsize read-only
The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP.
                     hh3cMplsLdpCrlspTnlIsPinned 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.12 truthvalue read-only
Indicates whether the loose-routed hops of this tunnel are to be pinned.
                     hh3cMplsLdpCrlspTnlFrequency 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.13 integer read-only
Indicates the frequency of usage of the established CRLSP.
                     hh3cMplsLdpCrlspTnlWeight 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.14 integer read-only
Indicates the weight that is the established CRLSP.
                     hh3cMplsLdpCrlspTnlRowStatus 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.15 rowstatus read-only
For controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the hh3cMplsLdpErHopTable, associated with this tunnel.
             hh3cMplsLdpCrlspErHopTable 1.3.6.1.4.1.25506.8.12.2.1.6.2 no-access
The hh3cMplsLdpCrlspErHopTable is used to indicate the hops, strict or loose, for an MPLS CRLSP tunnel defined in hh3cMplsLdpCrlspTnlTable. There must be atleast one entry in this table for each CRLSP tunnel that is supported in the hh3cMplsLdpCrlspTnlTable. The first row in the table is the first hop after the origination point of the tunnel.
                 hh3cMplsLdpCrlspErHopEntry 1.3.6.1.4.1.25506.8.12.2.1.6.2.1 no-access
An entry in this table represents a tunnel hop. An entry is created by a network administrator for signalled ERLSP set up by LDP or RSVP.
                     hh3cMplsLdpCrlspErHopIndex 1.3.6.1.4.1.25506.8.12.2.1.6.2.1.1 integer no-access
Secondary index into this table identifying the particular hop.
                     hh3cMplsLdpCrlspErHopAddrType 1.3.6.1.4.1.25506.8.12.2.1.6.2.1.2 integer read-only
Address type of this hop. Enumeration: 'ipV4': 1.
                     hh3cMplsLdpCrlspErHopIpv4Addr 1.3.6.1.4.1.25506.8.12.2.1.6.2.1.3 ipaddress read-only
If hh3cMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of this hop. This object is not significant otherwise and should return a value of 0.
                     hh3cMplsLdpCrlspErHopIpv4PrefixLen 1.3.6.1.4.1.25506.8.12.2.1.6.2.1.4 integer read-only
If hh3cMplsLdpCrlspErHopAddrType is ipV4(1), prefix length for this hop's IPv4 address. This object is not significant otherwise and should return a value of 0.
                     hh3cMplsLdpCrlspErHopStrictOrLoose 1.3.6.1.4.1.25506.8.12.2.1.6.2.1.5 integer read-only
Whether this is a strict or loose hop. Enumeration: 'strict': 1, 'loose': 2.
                     hh3cMplsLdpCrlspErHopRowStatus 1.3.6.1.4.1.25506.8.12.2.1.6.2.1.6 rowstatus read-only
For creating, modifying and deleting this row.
     hh3cMplsLdpNotifications 1.3.6.1.4.1.25506.8.12.2.2
         hh3cMplsLdpNotificationPrefix 1.3.6.1.4.1.25506.8.12.2.2.0
             hh3cMplsLdpFailedInitSessionThresholdExceeded 1.3.6.1.4.1.25506.8.12.2.2.0.1
This notification is generated whenever the value of hh3cMplsLdpEntityFailedInitSessionThreshold is exceeded.
             hh3cMplsLdpCrlspTunnelUp 1.3.6.1.4.1.25506.8.12.2.2.0.2
This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Label mapping message from the downstream LSR for the LAbel request sent for the CRLSP tunnel.
             hh3cMplsLdpCrlspTunnelDown 1.3.6.1.4.1.25506.8.12.2.2.0.3
This notification is generated when a CRLSP Row status is modified to destroy the CRLSP tunnel. - due to pre-emption etc.,
             hh3cMplsLdpCrlspTunnelSetupFailure 1.3.6.1.4.1.25506.8.12.2.2.0.4
This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Nak message from the downstream LSR for the Label request sent for the CRLSP tunnel. This can occur due to improper ER hop values being set, or Traffic resources not available etc.,
             hh3cMplsLdpIncarnUpEventFailure 1.3.6.1.4.1.25506.8.12.2.2.0.11
This notification is generated by LDP to notify the Incarnation UP Event failure
             hh3cMplsLdpIncarnDownEventFailure 1.3.6.1.4.1.25506.8.12.2.2.0.12
This notification is generated by LDP to notify the Incarnation DOWN Event failure
             hh3cMplsLdpEntityUpEventFailure 1.3.6.1.4.1.25506.8.12.2.2.0.13
This notification is generated by LDP to notify the ENTITY UP Event failure
             hh3cMplsLdpEntityDownEventFailure 1.3.6.1.4.1.25506.8.12.2.2.0.14
This notification is generated by LDP to notify the ENTITY DOWN Event failure
             hh3cMplsLdpSessionUpEventFailure 1.3.6.1.4.1.25506.8.12.2.2.0.15
Generation of this trap occurs when the value of 'hh3cMplsLdpSessionState' enters the 'operational(5)' state.
             hh3cMplsLdpSessionDownEventFailure 1.3.6.1.4.1.25506.8.12.2.2.0.16
Generation of this trap occurs when the value of 'hh3cMplsLdpSessionState' leaves the 'operational(5)' state.