GSWITCH-MIB: View SNMP OID List / Download MIB

VENDOR: NBASE SWITCH COMMUNICATION


 Home MIB: GSWITCH-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 nbase 1.3.6.1.4.1.629
         gswitch 1.3.6.1.4.1.629.2
             nbsNPorts 1.3.6.1.4.1.629.2.1 integer read-only
The number of ports in this device
             nbsDevIdentify 1.3.6.1.4.1.629.2.2
                 nbsUpLinkType 1.3.6.1.4.1.629.2.2.1 integer read-only
Up-Link Type of the device Enumeration: 'FDDI': 15, 'fast1Ethernet1000BaseGE': 14, 'fast8Ethernet10or100BaseTX': 7, 'notExist': 1, 'atm': 5, 'fast4Ethernet100BaseFO': 11, 'fast5Ethernet100BaseTX': 8, 'fast8Ethernet100BaseTX': 6, 'fast2Ethernet100BaseFX': 4, 'fast2Ethernet1000BaseGE': 16, 'fast2Ethernet100BaseTxFx': 3, 'fast5Ethernet100BaseFX': 9, 'fast8Ethernet100BaseTP': 10, 'VPN': 13, 'ISDN': 12, 'fast2Ethernet100BaseTX': 2.
                 nbsBaseHardVers 1.3.6.1.4.1.629.2.2.3 integer read-only
Hardware version of base card
                 nbsCardHardVers 1.3.6.1.4.1.629.2.2.4 integer read-only
Hardware version of the agent card
                 nbsUpLinkHardVers 1.3.6.1.4.1.629.2.2.5 integer read-only
Up-Link hardware version
                 nbsSoftVers 1.3.6.1.4.1.629.2.2.6 integer read-only
Agent software version
                 nbsSnifferPort 1.3.6.1.4.1.629.2.2.9 integer read-only
Sniffer Port Number. Specify the Sniffer Port Number chosen by the user
                 nbsCreatinDate 1.3.6.1.4.1.629.2.2.10 displaystring read-only
Agent software creation date and time
             nbsDeviceControl 1.3.6.1.4.1.629.2.3
                 nbsSpanningTree 1.3.6.1.4.1.629.2.3.6 integer read-write
Spanning Tree Enable. 1 - The BPDU(Bridge Protocol Data Unit) packets are treated as Multicast Packets, and therefore are forwarded to all ports. 2 - Forwards BPDU(Bridge Protocol Data Unit) packets to the CPU only. Enumeration: 'enable': 2, 'disable': 1.
                 nbsLearningProcess 1.3.6.1.4.1.629.2.3.7 integer read-write
Disable Learning Process. 1 - Learning Process is disabled. The Switch-G will not learn any new addresses from the wire. 2 - Learning Process is enabled Enumeration: 'enable': 1, 'disable': 2.
                 nbsParitionEnable 1.3.6.1.4.1.629.2.3.8 integer read-write
Partition Mode Enable. When more then 32 collisions occur while transmitting, the Switch-G port enters to the Partition mode. It waits for the first good packet from the wire and then return to Normal mode of opration. In Partition mode transmitting fromthe port is enabled but receiving is disabled. 1 - Patrition mode, 2 - Normal mode Enumeration: 'enable': 1, 'disable': 2.
                 nbsRMONmode 1.3.6.1.4.1.629.2.3.9 integer read-write
RMON Enable. 1 - The Switch-G enters the RMON mode(Station-to-Station connectivity Matrix). 2 - RMON disabled Enumeration: 'enable': 1, 'disable': 2.
                 nbsBufferThreshold 1.3.6.1.4.1.629.2.3.10 integer read-write
Buffer Threshold Enable. Meaningful only when RMONEn bit (internal) is set. 1 - The buffers allocated to the ports are limited to the number which is written in the Rx Buffers Threshold Register. 2 - There is no limitation on the buffers allocation Enumeration: 'limited': 1, 'not-limited': 2.
                 nbsForwardMulticast 1.3.6.1.4.1.629.2.3.12 integer read-write
Forward Multicast. Enable - multicast packets are Forwarded only to the CPU. Disable - multicast packets are being forward to all ports Enumeration: 'enable': 1, 'disable': 2.
                 nbsForwardUnkPkts 1.3.6.1.4.1.629.2.3.15 integer read-write
Forward Unknown Packets. If defines whether the Switch-G will forward Unknown packets to the Agent CPU or not. 1 - Forwared, 2 - Do not forwared Enumeration: 'enable': 1, 'disable': 2.
                 nbsBackOffMode 1.3.6.1.4.1.629.2.3.16 integer read-write
The CSMA/CD normal Back of mode multiples the back-off time frame after each each collision. In aggressive mode it stops to multiply after the second time. This way it will have an advantage of any other NIC who uses normal back-off mode. Enumeration: 'aggressive': 2, 'normal': 1.
             nbsPortsControl 1.3.6.1.4.1.629.2.5
                 nbsPortsContTable 1.3.6.1.4.1.629.2.5.1 no-access
A list of the port counters entries
                     nbsPortsContEntry 1.3.6.1.4.1.629.2.5.1.1 no-access
Contains the information necessary to configure/describe a port configuration. The number of rows/entries is fixed. A row/entry may not be created or deleted
                         nbsPortIndex1 1.3.6.1.4.1.629.2.5.1.1.1 integer read-only
The port# from 1 to nbsNPorts1
                         nbsPortEnable 1.3.6.1.4.1.629.2.5.1.1.2 integer read-write
Port Enable. 1 - Port is enabled 2 - Port is disabled Enumeration: 'enable': 1, 'disable': 2.
                         nbsPortDuplex 1.3.6.1.4.1.629.2.5.1.1.3 integer read-write
Half/Full Duplex. 1 - Port works in Half-Duplex mode 2 - Port works in Full-Duplex mode Enumeration: 'full': 2, 'half': 1.
                         nbsPortMonitor 1.3.6.1.4.1.629.2.5.1.1.5 integer read-write
Monitoring Mode. 1 - Port works in normal mode 2 - Port is set as Sniffer port (monitor mode) were all recived and transmit packats from all ports are sent to the Sniffer port Enumeration: 'sniffer': 2, 'normal': 1.
                         nbsPortPolDetection 1.3.6.1.4.1.629.2.5.1.1.6 integer read-write
Auto-Polarity Disable. Enable/Disable Auto-Polarity detection function 1 - Disable 2 - Enable Enumeration: 'enable': 1, 'disabel': 2.
                         nbsPortBroadcast 1.3.6.1.4.1.629.2.5.1.1.7 integer read-write
Filter Broadcast. 1 - Broadcast packats are forwarded to all ports. 2 - The Switch-G discards Broadcast packats Enumeration: 'forward': 1, 'discard': 2.
                         nbsPortForwardUnk 1.3.6.1.4.1.629.2.5.1.1.8 integer read-write
Forward Unknown. 1 - Unknown packats are forwarded. 2 - The Switch-G does not forward unknown packats to this port Enumeration: 'forward': 1, 'discard': 2.
                         nbsPortSpaning 1.3.6.1.4.1.629.2.5.1.1.9 integer read-write
Spaning Tree Enable. Meaniningful only when Spaning Tree for the switch is set (nbsSpanningTree) is set. 1 - All packets are accepted. 2 - The Switch-G discards all incoming/outgoing packets except for BPDU packets Enumeration: 'discard': 2, 'accept': 1.
                         nbsPortSpeed 1.3.6.1.4.1.629.2.5.1.1.10 integer read-write
Ports Speed. Meaningfull only for ports that support both 10 and 100 MBps speeds. 1 - Only for Uplink Ports: Switch-G - Ports ## 27,28 Switch-G - Ports ## 17,18 2 - After reset the port will operate in 10 MBps 3 - After reset the port will operate in 100 Mbps 4 - The port will operate in 1000 Mbps 5 - The port will operate in 10000 MBps (for example, XFP). Enumeration: 's10MBps': 2, 'none': 1, 's10000MBps': 5, 's100MBps': 3, 's1000MBps': 4.
             nbsPortsStatus 1.3.6.1.4.1.629.2.6
                 nbsPortsStatTable 1.3.6.1.4.1.629.2.6.1 no-access
A list of all the port status objects
                     nbsPortsStatEntry 1.3.6.1.4.1.629.2.6.1.1 no-access
The ports status information. port configuration. The number of rows/entries is fixed. A row/entry may not be created or deleted
                         nbsPortIndex 1.3.6.1.4.1.629.2.6.1.1.1 integer read-only
The port# from 1 to nbsNPorts1
                         nbsPortType 1.3.6.1.4.1.629.2.6.1.1.2 integer read-only
Port Type Enumeration: 'slowFiber': 5, 'gigaCopper': 6, 'normal': 2, 'fastFiber': 4, 'empty': 1, 'fastCopper': 3.
                         nbsPartition 1.3.6.1.4.1.629.2.6.1.1.3 integer read-only
Ports Partition. Indicates the ports Partition status. 1 - No Partition (Normal mode) 2 - Partition Enumeration: 'yes': 1, 'no': 2.
                         nbsLinkTest 1.3.6.1.4.1.629.2.6.1.1.4 integer read-only
Ports Link Test Fail. Indicates the ports Link Test status 1 - Link Test Pass 2 - Link Test Fail Enumeration: 'fail': 2, 'pass': 1.
             nbsPortsCounters 1.3.6.1.4.1.629.2.7
                 nbsPortsCountTable 1.3.6.1.4.1.629.2.7.1 no-access
A list of the port counters entries
                     nbsPortsCountEntry 1.3.6.1.4.1.629.2.7.1.1 no-access
Contains the information necessary to configure/describe a port configuration. The number of rows/entries is fixed. A row/entry may not be created or deleted
                         nbsPortIndex2 1.3.6.1.4.1.629.2.7.1.1.1 integer read-only
The port# from 1 to nbsNPorts1
                         nbsPortByteRec 1.3.6.1.4.1.629.2.7.1.1.2 counter read-only
Good Bytes Recived
                         nbsPortMulByteRec 1.3.6.1.4.1.629.2.7.1.1.3 counter read-only
Good Multicast Bytes Recived
                         nbsPortBroadByteRec 1.3.6.1.4.1.629.2.7.1.1.4 counter read-only
Good Broadcast Bytes Recived
                         nbsPortByteSent 1.3.6.1.4.1.629.2.7.1.1.5 counter read-only
Good Bytes Sent
                         nbsPortFramesRec 1.3.6.1.4.1.629.2.7.1.1.6 counter read-only
Good Frames Recived
                         nbsPortMulFramesRec 1.3.6.1.4.1.629.2.7.1.1.7 counter read-only
Good Multicast Frames Recived
                         nbsPortBroadFramesRec 1.3.6.1.4.1.629.2.7.1.1.8 counter read-only
Broadcast Frames Recived
                         nbsPortFramesSent 1.3.6.1.4.1.629.2.7.1.1.9 counter read-only
Frames Sent
                         nbsPortCollisions 1.3.6.1.4.1.629.2.7.1.1.10 counter read-only
Recive and Transmit Collision
                         nbsPortLateColl 1.3.6.1.4.1.629.2.7.1.1.11 counter read-only
Recive and Transmit Late Collision
                         nbsPortCRCAligErr 1.3.6.1.4.1.629.2.7.1.1.12 counter read-only
Recive CRC or Alignment Error
                         nbsPortFramesShort 1.3.6.1.4.1.629.2.7.1.1.13 counter read-only
Recive Frames
                         nbsPortFrameLong 1.3.6.1.4.1.629.2.7.1.1.14 counter read-only
Recive Frames > 1518 bytes with Good CRC
                         nbsPortJabber 1.3.6.1.4.1.629.2.7.1.1.15 counter read-only
Recive Frames > 1518 bytes with Bad CRC
                         nbsPortBadByteRec 1.3.6.1.4.1.629.2.7.1.1.16 counter read-only
Bad Bytes Recived. Bytes with CRC errors and frame too long
             nbsAddressTable 1.3.6.1.4.1.629.2.8
                 nbsMACAddrTable 1.3.6.1.4.1.629.2.8.1 no-access
The DRAM address table contains all the MAC addresses up to 8K records.
                     nbsMACAddrEntry 1.3.6.1.4.1.629.2.8.1.1 no-access
The entries (records)
                         nbsAddrIndex 1.3.6.1.4.1.629.2.8.1.1.1 integer read-only
An index from 1 to 8K. * (number of devices+1)
                         nbsMACAddress 1.3.6.1.4.1.629.2.8.1.1.3 octet string read-write
The MAC Address where the packet came from
                         nbsAddrPort 1.3.6.1.4.1.629.2.8.1.1.4 integer read-write
The source port in this device
                         nbsAddrStatic 1.3.6.1.4.1.629.2.8.1.1.5 integer read-write
Static indecation bit in the MAC Address entry Enumeration: 'yes': 1, 'no': 2.
                         nbsAddrForwardTo 1.3.6.1.4.1.629.2.8.1.1.6 integer read-write
This indicates whether to forward frames destined to this MAC address to all ports or only to the destination port Enumeration: 'destination-port': 1, 'all-ports': 2.
             nbsSlotsTable 1.3.6.1.4.1.629.2.9
                 nbsCardsTable 1.3.6.1.4.1.629.2.9.1 no-access
define the Cards' Types (for NH5500 and other GSWITCH HUBS..).
                     nbsCardsEntry 1.3.6.1.4.1.629.2.9.1.1 no-access
The entries (records)
                         nbsCardIndex 1.3.6.1.4.1.629.2.9.1.1.1 integer read-only
The slot#. An index from 1 to The number of slots.
                         nbsCardType 1.3.6.1.4.1.629.2.9.1.1.2 integer read-only
The Card's type: copper20Ethernet10or100Base (2) - Slot including 20 fast copper 10/100 MBps Ports; copper40Ethernet10Base (3) - Slot including 40 normal copper 10 MBps Ports; fibre10Ethernet100Base (6) - Slot including 10 fast fibre optic 100 MBps Ports; universal (9) - Slot including Uplink Modules of the different types; Enumeration: 'fansUnitOK': 8, 'copper20Ethernet10or100Base': 2, 'copper40Ethernet10Base': 3, 'universal': 9, 'emptySlot': 1, 'powerSupplyOK': 5, 'fansUnitError': 7, 'powerSupplyError': 4, 'fibre10Ethernet100Base': 6.
             nbsNMacRecords 1.3.6.1.4.1.629.2.10 integer read-only
The number of Records (addresses) in the MAC table
             nbsMacFirstGap 1.3.6.1.4.1.629.2.11 integer read-only
The index of the first gap (empty record) in the MAC table
             nbsPALPorts 1.3.6.1.4.1.629.2.12
                   nbsPALPortsTable 1.3.6.1.4.1.629.2.12.1 no-access
Table contain data only for the existing PAL modules ports.
                       nbsPALPortsEntry 1.3.6.1.4.1.629.2.12.1.1 no-access
The PAL Optic Power Ports status.
                           nbsPALPortIndex 1.3.6.1.4.1.629.2.12.1.1.1 integer read-only
The number of the real existing PAL port. (the same as [ifIndex] in the MIB-II).
                           nbsPALPortOpticPower 1.3.6.1.4.1.629.2.12.1.1.2 integer read-only
PAL Port Optic Power status. (interval: 0 - 15)