GSWB-MIB: View SNMP OID List / Download MIB

VENDOR: FUJITSU LIMITED


 Home MIB: GSWB-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, Q-BRIDGE-MIB, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fujitsu 1.3.6.1.4.1.211
         products 1.3.6.1.4.1.211.1
             iaServer 1.3.6.1.4.1.211.1.31
                   primequest 1.3.6.1.4.1.211.1.31.1
                       switch 1.3.6.1.4.1.211.1.31.1.3
                           gswb 1.3.6.1.4.1.211.1.31.1.3.1
                               fujitsu_gswbProd 1.3.6.1.4.1.211.1.31.1.3.1.1
                                   swProperty 1.3.6.1.4.1.211.1.31.1.3.1.1.1
                                       swModule 1.3.6.1.4.1.211.1.31.1.3.1.1.1.1
                                             addressTableFull 1.3.6.1.4.1.211.1.31.1.3.1.1.1.10.1
The trap is sent whenever the address table is full.
                               agentConfigInfo 1.3.6.1.4.1.211.1.31.1.3.1.2
                                   agentBasicInfo 1.3.6.1.4.1.211.1.31.1.3.1.2.1
                                       agentRuntimeSwVersion 1.3.6.1.4.1.211.1.31.1.3.1.2.1.1 displaystring read-only
This is a textual description of the runtime software version and revision. If the version number is one and revision number is zero agentRuntimeSwVersion would be 'Ver. 1.0'
                               swDevPackage 1.3.6.1.4.1.211.1.31.1.3.1.3
                                   swDevInfo 1.3.6.1.4.1.211.1.31.1.3.1.3.1
                                       swDevInfoSystemUpTime 1.3.6.1.4.1.211.1.31.1.3.1.3.1.1 timeticks read-only
The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then this object contains a zero value. This value is in units of seconds.
                                       swDevInfoSystemLedStatus 1.3.6.1.4.1.211.1.31.1.3.1.3.1.2 octet string read-only
other(1), Speed010M(2), Speed100M(3), Speed001G(4), Speed010G(5), NoExisting(129), NotLink(130), PortDisable(131), Link(132), Active(133)
                               swPortPackage 1.3.6.1.4.1.211.1.31.1.3.1.4
                                   swPortInfoTable 1.3.6.1.4.1.211.1.31.1.3.1.4.1 no-access
A table that contains information about every port.
                                       swPortInfoEntry 1.3.6.1.4.1.211.1.31.1.3.1.4.1.1 no-access
A list of information for each port of the device.
                                           swPortInfoPortIndex 1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                                           swPortInfoType 1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.2 integer read-only
This object indicates the connector type of this port. Enumeration: 'portType-10GBASE-LR': 4, 'other': 1, 'portType-1000BASE-T': 3, 'portType-100BASE-TX': 2.
                                           swPortInfoLinkStatus 1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.3 integer read-only
This object indicates the port link status. Enumeration: 'link-fail': 3, 'other': 1, 'link-pass': 2.
                                           swPortInfoNwayStatus 1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.4 integer read-only
This object indicates the port speed and duplex mode. Enumeration: 'half-10Mbps': 2, 'full-1Gigabps': 7, 'full-100Mbps': 5, 'half-1Gigabps': 6, 'full-10Mbps': 3, 'other': 1, 'half-100Mbps': 4, 'full-10Gigabps': 9.
                                           swPortInfoFlowCtrlStatus 1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.5 integer read-only
This object indicates the port flow control status. Enumeration: 'disabled': 2, 'tx-Only': 5, 'rx-Only': 4, 'other': 1, 'enabled': 3.
                               swPortTrunkPackage 1.3.6.1.4.1.211.1.31.1.3.1.6
                                   swPortTrunkTable 1.3.6.1.4.1.211.1.31.1.3.1.6.1 no-access
This table specifys which ports group a set of ports(up to 8) into a single logical link.
                                       swPortTrunkEntry 1.3.6.1.4.1.211.1.31.1.3.1.6.1.1 no-access
A list of information specifies which ports group a set of ports(up to 8) into a single logical link.
                                           swPortTrunkIndex 1.3.6.1.4.1.211.1.31.1.3.1.6.1.1.1 integer no-access
The index of logical port trunk.The device max support 7 trunk groups. The trunk group number depend on the existence of module.
                                           swPortTrunkName 1.3.6.1.4.1.211.1.31.1.3.1.6.1.1.2 displaystring read-only
The name of logical port trunk.
                                           swPortTrunkLoadBalance 1.3.6.1.4.1.211.1.31.1.3.1.6.1.1.3 integer read-only
other(1) src-mac(2) dst-mac(3) src-dst-mac(4) src-ip(5) dst-ip(6) src-dst-ip(7) Enumeration: 'dst-mac': 3, 'src-mac': 2, 'src-ip': 5, 'src-dst-ip': 7, 'other': 1, 'src-dst-mac': 4, 'dst-ip': 6.
                                           swPortTrunkMemberPorts 1.3.6.1.4.1.211.1.31.1.3.1.6.1.1.4 portlist read-only
The members of the port trunk.
                               swIGMPPackage 1.3.6.1.4.1.211.1.31.1.3.1.7
                                   swIGMPStatus 1.3.6.1.4.1.211.1.31.1.3.1.7.1 integer read-only
This object indicates the status of this switch. other(1) - this switch is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - IGMP funtion is disabled for this switch. enabled(3) - IGMP funtion is enabled for this switch. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                   swIGMPEnableVlanCount 1.3.6.1.4.1.211.1.31.1.3.1.7.2 integer read-only
                                   swIGMPMulticastTableCount 1.3.6.1.4.1.211.1.31.1.3.1.7.3 integer read-only
                                   swIGMPInfoTable 1.3.6.1.4.1.211.1.31.1.3.1.7.4 no-access
The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device.
                                       swIGMPInfoEntry 1.3.6.1.4.1.211.1.31.1.3.1.7.4.1 no-access
Information about current IGMP query information, provided that swIGMPStatus and swIGMPQueryState of associated VLAN entry are all enabled.
                                           swIGMPInfoVid 1.3.6.1.4.1.211.1.31.1.3.1.7.4.1.1 vlanid no-access
This object indicates the Vid of associated IGMP info table entry. It follows swIGMPCtrlVid in the associated entry of IGMP control table (swIGMPCtrlTable).
                                           swIGMPInfoGeneralQueryCount 1.3.6.1.4.1.211.1.31.1.3.1.7.4.1.2 counter read-only
This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis.
                                           swIGMPInfoSpecificQueryCount 1.3.6.1.4.1.211.1.31.1.3.1.7.4.1.3 counter read-only
This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
                                           swIGMPInfoLeaveGroupCount 1.3.6.1.4.1.211.1.31.1.3.1.7.4.1.4 counter read-only
This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
                                   swIGMPTable 1.3.6.1.4.1.211.1.31.1.3.1.7.5 no-access
The table containing current IGMP information which captured by this device, provided that swIGMPStatus and swIGMPQueryState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swFdbFilterTable description also.
                                       swIGMPEntry 1.3.6.1.4.1.211.1.31.1.3.1.7.5.1 no-access
Information about current IGMP information which captured by this device , provided that swIGMPStatus and swIGMPQueryState of associated VLAN entry are all enabled.
                                           swIGMPVid 1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.1 vlanid no-access
This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.
                                           swIGMPGroupMacAddr 1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.2 macaddress no-access
This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.
                                           swIGMPStaticFlag 1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.3 truthvalue read-only
                                           swIGMPPortMap 1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.4 portlist read-only
This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port.
                                           swIGMPIpGroupReportCount 1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.5 counter read-only
This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis. .