GSMP-SERVICE-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: GSMP-SERVICE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, IF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 gsmpServiceMIB 1.3.6.1.2.1.1
This MIB contains managed object definitions for network management services in General Switch Management Protocol (GSMP) Interface.
     gsmpServiceObjects 1.3.6.1.2.1.1.1
         gsmpSwitchConfTable 1.3.6.1.2.1.1.1.1 no-access
This table represents the information of switch configuration.
             gsmpSwitchConfEntry 1.3.6.1.2.1.1.1.1.1 no-access
The entry of this table is mapped with the each switch partition.
                 gsmpSwitchPartitionIndex 1.3.6.1.2.1.1.1.1.1.1 integer32 no-access
This is unique index for an entry in the gsmpSwitchConfEntry.
                 gsmpSwitchConfMtype1 1.3.6.1.2.1.1.1.1.1.2 integer32 read-write
In the request, this object contains the requested QoS configuration type. In the response, this object contains the accepted QoS configuration type. 0 : Indicates use of the default GSMP model 1 : Indicates use of IEEE qGSMP model 2-200 : Reserved 201-255 : Experimental
                 gsmpSwitchConfMtype2 1.3.6.1.2.1.1.1.1.1.3 integer32 read-only
If the switch can not support the requested OoS configuration type in gsmpSwitchConfMtype1, it negotiates the QoS model with the manager by offering up to three additional MType
                 gsmpSwitchConfMtype3 1.3.6.1.2.1.1.1.1.1.4 integer32 read-only
If the switch can not support the requested OoS configuration type in gsmpSwitchConfMtype1, it negotiates the QoS model with the manager by offering up to three additional Mtype
                 gsmpSwitchConfMtype4 1.3.6.1.2.1.1.1.1.1.5 integer32 read-only
If the switch can not support the requested OoS configuration type in gsmpSwitchConfMtype1, it negotiates the QoS model with the manager by offering up to three additional Mtype
                 gsmpSwitchConfFirmVer 1.3.6.1.2.1.1.1.1.1.6 octet string read-only
The version number of the switch control firmware installed.
                 gsmpSwitchConfWindowSize 1.3.6.1.2.1.1.1.1.1.7 integer32 read-write
The maximum number of unacknowledged request messages that may be transmitted by the controller without the possibility of loss.
                 gsmpSwitchConfSwitchType 1.3.6.1.2.1.1.1.1.1.8 octet string read-only
A 16-bit value allocated by the manufacturer of the switch. When this value is combined with the OUI from the gsmpSwitchConfSwitchName, the product is uniquely identified.
                 gsmpSwitchConfSwitchName 1.3.6.1.2.1.1.1.1.1.9 octet string read-only
This object is a 48-bit quantity. A 48-bit IEEE 802 MAC address, if available, may be used.
                 gsmpSwitchConfMaxReservation 1.3.6.1.2.1.1.1.1.1.10 integer32 read-only
The maximum number of reservations that the switch can support. A value of 0 indicates that the switch does not support reservations.
         gsmpInterfaceConfTable 1.3.6.1.2.1.1.1.2 no-access
This table represents the configuration information of a single switch port.
             gsmpInterfaceConfEntry 1.3.6.1.2.1.1.1.2.1 no-access
An entry in this table represents the configuration information of a single switch port.
                 gsmpInterfaceConfIndex 1.3.6.1.2.1.1.1.2.1.1 interfaceindexorzero no-access
This is a unique index for an entry in the gsmpInterfaceConfTable.
                 gsmpPortType 1.3.6.1.2.1.1.1.2.1.2 integer read-only
This object represents the port type. Enumeration: 'frameRelay': 2, 'atm': 1, 'mpls': 3.
                 gsmpPortStatus 1.3.6.1.2.1.1.1.2.1.3 integer read-write
This object indicates the port status. Enumeration: 'available': 1, 'internalLoopback': 3, 'bothwayLoopback': 5, 'unavailable': 2, 'externalLoopback': 4.
                 gsmpLineType 1.3.6.1.2.1.1.1.2.1.4 integer read-only
This object represents the type of physical transmission interface for this port. PortType = Unknown: other(1) PortType = MPLS: ethernetCsmacd(2), ppp(3) PortType = ATM: atm(4) PortType = FR: frameRelayService(5) Enumeration: 'frameRelayService': 5, 'ppp': 3, 'other': 1, 'ethernetCsmacd': 2, 'atm': 4.
                 gsmpFunctionType 1.3.6.1.2.1.1.1.2.1.5 integer read-write
It specifies the action to be taken by the switch. The specified action will be taken regardless of the current status of the port. Enumeration: 'bothwayLoopback': 5, 'resetInputPort': 6, 'setTransimtDataRate': 8, 'internalLoopback': 3, 'bringUp': 1, 'resetFlags': 7, 'externelLoopback': 4, 'takeDown': 2.
                 gsmpLineStatus 1.3.6.1.2.1.1.1.2.1.6 integer read-write
It defines the status of the physical transmission medium connected to the port. The defined values of the Line Status field are: up(1): The line is able to both send and receive. When the line status changes to Up from either the down or test states, a new port session number MUST be generated. down(2): The line is unable either to send or receive or both. Test(3): The port or line is in a test mode, for example, power-on test. Enumeration: 'down': 2, 'test': 3, 'up': 1.
                 gsmpPriorties 1.3.6.1.2.1.1.1.2.1.7 integer32 read-write
This object represents the number of different priority levels that this output port can assign to connections. Zero is invalid in this field.
                 gsmpPhysicalSlotNumber 1.3.6.1.2.1.1.1.2.1.8 integer32 read-only
The physical location of the slot in which the port is located.
                 gsmpPhysicalPortNumber 1.3.6.1.2.1.1.1.2.1.9 integer32 read-only
The physical location of the port within the slot in which the port is located. The Physical Port Number is not used by the GSMP protocol. It is provided to assist network management in functions such as logging, port naming, and graphical representation.
                 gsmpMinLabel 1.3.6.1.2.1.1.1.2.1.10 label read-write
The minimum label value in the range.
                 gsmpMaxLabel 1.3.6.1.2.1.1.1.2.1.11 label read-write
The maximum label value in the range.
                 gsmpRemainingLabels 1.3.6.1.2.1.1.1.2.1.12 unsigned32 read-only
The maximum number of remaining labels that could be requested for allocation on the specified port.
                 gsmpConnectionReplace 1.3.6.1.2.1.1.1.2.1.13 truthvalue read-write
It indicates that a switch controller requests the switch port to support the mechanism of connection replacement.
                 gsmpDuration 1.3.6.1.2.1.1.1.2.1.14 integer32 read-write
It is the length of time in seconds, that any of the loopback states remain in operation.
                 gsmpEventSequenceNumber 1.3.6.1.2.1.1.1.2.1.15 integer32 read-only
This object represents the current value of the event sequence number of the switch port. This number is set to zero when the port is initialed.
                 gsmpEventFlags 1.3.6.1.2.1.1.1.2.1.16 bits read-write
It is used to reset the event flags. Bits: 'adjacencyEvent': 5, 'deadPort': 4, 'portUp': 0, 'invalidLabel': 2, 'newPort': 3, 'portDown': 1.
                 gsmpFlowControlFlags 1.3.6.1.2.1.1.1.2.1.17 bits read-write
It is used to indicate whether the flow control mechanism is turned on or not. Bits: 'adjacencyEvent': 5, 'deadPort': 4, 'portUp': 0, 'invalidLabel': 2, 'newPort': 3, 'portDown': 1.
                 gsmpTransmitDataRate 1.3.6.1.2.1.1.1.2.1.18 unsigned32 read-write
It is used to set the output data rate of the output port. cells/s for PortType = ATM bytes/s for PortType = FR bytes/s for PortType = MPLS
                 gsmpReceiveDataRate 1.3.6.1.2.1.1.1.2.1.19 unsigned32 read-write
The maximum rate of data that may arrive at the input port. cells/s for PortType = ATM bytes/s for PortType = FR bytes/s for PortType = MPLS
         gsmpServiceTable 1.3.6.1.2.1.1.1.3 no-access
This table represents the list of services and their associated parameters, which are supported by the switch.
             gsmpServiceEntry 1.3.6.1.2.1.1.1.3.1 no-access
The entry of this table represents the list of services and their associated parameters, which are supported by the switch.
                 gsmpServiceId 1.3.6.1.2.1.1.1.3.1.1 integer32 no-access
This object represents the identifier of the service supported by the switch.
                 gsmpCapSetId 1.3.6.1.2.1.1.1.3.1.2 integer32 no-access
A capability set contains a set of parameters that describe the QoS parameter values and traffic controls that apply to an instance of the service.
                 gsmpTrafficControls 1.3.6.1.2.1.1.1.3.1.3 bits read-only
Identifies the availability of traffic controls within the capability set. U: Usage Parameter Control D: Packet Discard I: Ingress Shaping E: Egress Shaping, Peak Rate S: Egress Traffic Shaping, Sustainable Rate V: VC Merge Bits: 'usageParameterControl': 0, 'packetDiscard': 1, 'vcMerge': 5, 'ingressShaping': 2, 'egressTrafficShaping': 4, 'egressShaping': 3.
                 gsmpCellLossRatio 1.3.6.1.2.1.1.1.3.1.4 integer32 read-only
It indicates the cell loss ratio parameter guaranteed by the switch for the specified service.
                 gsmpCellTransferDelay 1.3.6.1.2.1.1.1.3.1.5 unsigned32 read-only
The value of this object is expressed in units of microseconds.
                 gsmpCellDelayVariation 1.3.6.1.2.1.1.1.3.1.6 unsigned32 read-only
It represents the peak-to-peak cell delay variation. The CDV value is expressed in units of microseconds.
                 gsmpFrequency 1.3.6.1.2.1.1.1.3.1.7 unsigned32 read-only
Frequency applies to the MPLS CR-LDP service. Valid values of this object are: 0 - Very frequent 1 - Frequent 2 - Unspecified
         gsmpPortServiceMapTable 1.3.6.1.2.1.1.1.4 no-access
This table represents the service lists, which are supported by the specific port.
             gsmpPortServiceMapEntry 1.3.6.1.2.1.1.1.4.1 no-access
The entry of this table represents the service lists, which are supported by the specific port.
                 gsmpMapServiceId 1.3.6.1.2.1.1.1.4.1.1 integer32 read-only
This object represents the identifier of the service supported by the switch.
                 gsmpMapCapSetId 1.3.6.1.2.1.1.1.4.1.2 integer32 read-only
A capability set contains a set of parameters that describe the QoS parameter values and traffic controls that apply to an instance of the Service.
         gsmpTrafficParamIndexNext 1.3.6.1.2.1.1.1.5 unsigned32 read-only
This object contains an appropriate value which will be used for gsmpTrafficParamIndex.
         gsmpTrafficParamTable 1.3.6.1.2.1.1.1.6 no-access
This table contains objects, which specify the traffic parameters of in-segments and out-segments.
             gsmpTrafficParamEntry 1.3.6.1.2.1.1.1.6.1 no-access
An entry in this table represents the gsmpTrafficParam objects for one or more in or out segments.
                 gsmpTrafficParamIndex 1.3.6.1.2.1.1.1.6.1.1 unsigned32 no-access
Uniquely identifies this row of this table. Note that zero represents an invalid index.
                 gsmpTrafficParamMaxRate 1.3.6.1.2.1.1.1.6.1.2 integer32 read-only
Maximum rate in kilobits/second.
                 gsmpTrafficParamMeanRate 1.3.6.1.2.1.1.1.6.1.3 integer32 read-only
Mean rate in kilobits/second.
                 gsmpTrafficParamMaxBurstSize 1.3.6.1.2.1.1.1.6.1.4 unsigned32 read-only
Maximum burst size in bytes.
                 gsmpTrafficControlsFlags 1.3.6.1.2.1.1.1.6.1.5 bits read-only
This object is used to indicate that specific traffic controls are requested for the requested connection. 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ |U|D|I|E|S|V|P|x| +-+-+-+-+-+-+-+-+ U: Usage Parameter Control D: Packet Discard I: Ingress Shaping E: Egress Shaping, Peak Rate S: Egress Traffic Shaping, Sustainable Rate V: VC Merge P: Port x: Reserved Bits: 'usageParameterControl': 0, 'packetDiscard': 1, 'vcMerge': 5, 'ingressShaping': 2, 'egressTrafficShaping': 4, 'egressShaping': 3, 'port': 6.
                 gsmpTrafficParamRowStatus 1.3.6.1.2.1.1.1.6.1.6 rowstatus read-only
For creating, modifying, and deleting this row.
                 gsmpTrafficParamStorageType 1.3.6.1.2.1.1.1.6.1.7 storagetype read-only
Defines the storage type support provided for this object by the agent.
         gsmpInSegmentTable 1.3.6.1.2.1.1.1.7 no-access
This table contains a description of the incoming GSMP segments and their associated parameters.
             gsmpInSegmentEntry 1.3.6.1.2.1.1.1.7.1 no-access
An entry in this table represents one incoming GSMP segment.
                 gsmpInSegmentIfIndex 1.3.6.1.2.1.1.1.7.1.1 interfaceindexorzero no-access
This is a unique index for an entry in the gsmpInSegmentTable. This value represents the interface index for the incoming GSMP interface. A value of zero represents an incoming label from the per-platform label space.
                 gsmpInSegmentLabel 1.3.6.1.2.1.1.1.7.1.2 label no-access
The incoming label for this segment.
                 gsmpInSegmentXCIndex 1.3.6.1.2.1.1.1.7.1.3 unsigned32 read-only
Index into gsmpXCTable which identifies which cross-connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this in-segment is a part of, this object is automatically updated to reflect the value of gsmpXCIndex of that cross-connect entry.
                 gsmpInSegmentOwner 1.3.6.1.2.1.1.1.7.1.4 owner read-only
This object denotes the entity that created and is responsible for managing this segment.
                 gsmpInSegmentTrafficParamPtr 1.3.6.1.2.1.1.1.7.1.5 rowpointer read-only
This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the gsmpTrafficParamTable to indicate which gsmpTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table.
                 gsmpInQoSModelSelector 1.3.6.1.2.1.1.1.7.1.6 integer read-only
simplePriorityModel(1): The input service selector indicates a simple priority. serviceProfileModel(2): The input service selector is an opaque service profile identifier. Service profiles can be used to indicate pre- defined differentiated service per hop behaviors. serviceModel(3): The input service selector corresponds to a service specification. When the value of this object is serviceModel(3), then a traffic parameters block is appended to this entry. armModel(4): The input service selector corresponds to an ARM service specification. ARM model is defined in qGSMP specification. Enumeration: 'serviceProfileModel': 2, 'simplePriorityModel': 1, 'serviceModel': 3, 'armModel': 4.
                 gsmpInServiceSelector 1.3.6.1.2.1.1.1.7.1.7 integer32 read-only
This object identifies details of the service specification being used for connection. The interpretation depends upon the gsmpInQoSModelSelector object.
                 gsmpInAdaptationMethodType 1.3.6.1.2.1.1.1.7.1.8 integer read-only
The adaptation method is used to define the adaptation framing that may be in use when moving traffic from one port type to another port type; e.g., from a frame relay port to an ATM port. Enumeration: 'frf5': 2, 'ppp': 1, 'frf8': 3.
                 gsmpInSegmentRowStatus 1.3.6.1.2.1.1.1.7.1.9 rowstatus read-only
This variable is used to create, modify, and/or delete a row in this table.
                 gsmpInSegmentStorageType 1.3.6.1.2.1.1.1.7.1.10 storagetype read-only
This variable indicates the storage type for this object.
         gsmpOutSegmentTable 1.3.6.1.2.1.1.1.8 no-access
This table contains a description of the outgoing GSMP segments to a connection and their associated parameters.
             gsmpOutSegmentEntry 1.3.6.1.2.1.1.1.8.1 no-access
An entry in this table represents one outgoing GSMP segment.
                 gsmpOutSegmentIfIndex 1.3.6.1.2.1.1.1.8.1.1 interfaceindex read-only
This is a unique index for an entry in the gsnmpOutSegmentTable. This value represents the interface index for the outgoing GSMP interface. A value of zero represents an outgoing label from the per-platform label space.
                 gsmpOutSegmentLabel 1.3.6.1.2.1.1.1.8.1.2 label read-only
The outgoing label for this segment.
                 gsmpOutSegmentXCIndex 1.3.6.1.2.1.1.1.8.1.3 unsigned32 read-only
Index into gsmpXCTable which identifies which cross-connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this out-segment is a part of, this object is automatically updated to reflect the value of gsmpXCIndex of that cross-connect entry.
                 gsmpOutSegmentOwner 1.3.6.1.2.1.1.1.8.1.4 owner read-only
This object denotes the entity that created and is responsible for managing this segment.
                 gsmpOutSegmentTrafficParamPtr 1.3.6.1.2.1.1.1.8.1.5 rowpointer read-only
This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the gsmpTrafficParamTable to indicate which gsmpTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table.
                 gsmpOutQoSModelSelector 1.3.6.1.2.1.1.1.8.1.6 integer read-only
simplePriorityModel(1): The output service selector indicates a simple priority. serviceProfileModel(2): The output service selector is an opaque service profile identifier. Service profiles can be used to indicate pre- defined differentiated service per hop behaviors. serviceModel(3): The output service selector corresponds to a service specification. When the value of this object is serviceModel(3), then a traffic parameters block is appended to this entry. armModel(4): The output service selector corresponds to an ARM service specification. ARM model is defined in qGSMP specification. Enumeration: 'serviceProfileModel': 2, 'simplePriorityModel': 1, 'serviceModel': 3, 'armModel': 4.
                 gsmpOutAdaptationMethodType 1.3.6.1.2.1.1.1.8.1.8 integer read-only
The adaptation method is used to define the adaptation framing that may be in use when moving traffic from one port type to another port type; e.g., from a frame relay port to an ATM port. Enumeration: 'frf5': 2, 'ppp': 1, 'frf8': 3.
                 gsmpOutSegmentRowStatus 1.3.6.1.2.1.1.1.8.1.9 rowstatus read-only
This variable is used to create, modify, and/or delete a row in this table.
                 gsmpOutSegmentStorageType 1.3.6.1.2.1.1.1.8.1.10 storagetype read-only
This variable indicates the storage type for this object.
         gsmpXCIndexNext 1.3.6.1.2.1.1.1.9 unsigned32 read-only
This object contains an appropriate value to be used for gsmpXCIndex when creating entries in the gsmpXCTable.
         gsmpXCTable 1.3.6.1.2.1.1.1.10 no-access
A connection is modeled as a cross-connect consisting of one or more incoming segments(in-segments) and/or one or more outgoing segments(out-segments) at a switch. The association or interconnection of the in-segments and out-segments is accomplished by using the gsmpXCTable.
               gsmpXCEntry 1.3.6.1.2.1.1.1.10.1 no-access
A row in this table represents one cross-connect entry.
                   gsmpXCIndex 1.3.6.1.2.1.1.1.10.1.1 unsigned32 no-access
Primary index for the conceptual row identifying cross-connect segments.
                   gsmpXCInSegmentIfIndex 1.3.6.1.2.1.1.1.10.1.2 interfaceindexorzero no-access
Interface index of the in-segment.
                   gsmpXCInSegmentLabel 1.3.6.1.2.1.1.1.10.1.3 label no-access
Incoming label.
                   gsmpXCOutSegmentIfIndex 1.3.6.1.2.1.1.1.10.1.4 interfaceindexorzero no-access
Interface index of the out-segment.
                   gsmpXCOutSegmentLabel 1.3.6.1.2.1.1.1.10.1.5 label no-access
Outgoing label.
                   gsmpXCIsPersistent 1.3.6.1.2.1.1.1.10.1.6 truthvalue read-only
This object denotes whether or not this cross-connect entry and associated in- and out-segments should be restored automatically after failures. This value MUST be set to false in cases where this cross-connect entry was created by a signaling protocol.
                   gsmpXCOwner 1.3.6.1.2.1.1.1.10.1.7 owner read-only
It denotes the entity that created and is responsible for managing this cross-connect.
                   gsmpXCAdminStatus 1.3.6.1.2.1.1.1.10.1.8 integer read-only
The desired operational status of this segment. up(1) = ready to pass packets testing(3) = in some test mode Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                   gsmpXCOperStatus 1.3.6.1.2.1.1.1.10.1.9 integer read-only
The actual operational status of this cross-connect. up(1) = ready to pass packets testing(3) = in some test mode unknown(4) = status cannot be determined for some reason notPresent(6) = some component is missing lowerLayerDown(7) = down due to the state of lower layer interfaces Enumeration: 'dormant': 5, 'lowerLayerDown': 7, 'unknown': 4, 'testing': 3, 'up': 1, 'down': 2, 'notPresent': 6.
                   gsmpConnectType 1.3.6.1.2.1.1.1.10.1.10 integer read-only
This object is used to define connection types. Enumeration: 'point-to-multipoint': 2, 'point-to-point': 1, 'multipoint-to-multipoint': 4, 'multipoint-to-point': 3.
                   gsmpBiDirection 1.3.6.1.2.1.1.1.10.1.11 truthvalue read-only
If this flag is true, then the connection should be established to be bi-direction.
                   gsmpXCRowStatus 1.3.6.1.2.1.1.1.10.1.12 rowstatus read-only
This variable is used to create, modify, and/or delete a row in this table.
                   gsmpXCStorageType 1.3.6.1.2.1.1.1.10.1.13 storagetype read-only
This variable indicates the storage type for this object.
         gsmpInterfacePerfTable 1.3.6.1.2.1.1.1.11 no-access
This table contains objects to measure the performance of GSMP interfaces and is an AUGMENT to gsmpInterfaceConfTable.
               gsmpInterfacePerfEntry 1.3.6.1.2.1.1.1.11.1 no-access
The Entry of this table contains objects to measure the performance of GSMP interfaces and is an AUGMENT to gsmpInterfaceConfTable.
                   gsmpInterfaceInFrameCount 1.3.6.1.2.1.1.1.11.1.1 counter64 read-only
This object counts frames arriving at the input. It is relevant for label types = FR and MPLS.
                   gsmpInterfaceInInvalidLabelCount 1.3.6.1.2.1.1.1.11.1.2 counter64 read-only
This object counts frames discarded because their Label is invalid on arrival at an input port.
                   gsmpInterfaceInFrameDiscardCount 1.3.6.1.2.1.1.1.11.1.3 counter64 read-only
This object counts frames discarded due to congestion on an input port. It is relevant for label types = FR and MPLS.
                   gsmpInterfaceOutFrameCount 1.3.6.1.2.1.1.1.11.1.4 counter64 read-only
This object counts frames arriving at the output. It is relevant for label types = FR and MPLS.
                   gsmpInterfaceOutFrameDiscardCount 1.3.6.1.2.1.1.1.11.1.5 counter64 read-only
This object counts frames discarded due to congestion on an output port. It is relevant for label types = FR and MPLS.
         gsmpLabelPerfTable 1.3.6.1.2.1.1.1.12 no-access
This table has objects to measure the performance of connection.
               gsmpLabelPerfEntry 1.3.6.1.2.1.1.1.12.1 no-access
The Entry of this table contains objects to measure the performance of GSMP label.
                   gsmpLabelIndex 1.3.6.1.2.1.1.1.12.1.1 label no-access
This is a unique index for an entry in the gsmpLabelPerfTable.
                   gsmpLabelInFrameCount 1.3.6.1.2.1.1.1.12.1.2 counter64 read-only
This object counts frames arriving at the in-segment. It is relevant for label types = FR and MPLS.
                   gsmpLabelInFrameDiscardCount 1.3.6.1.2.1.1.1.12.1.3 counter64 read-only
This object counts frames discarded due to congestion on the in-segment. It is relevant for label types = FR and MPLS.
                   gsmpLabelOutFrameCount 1.3.6.1.2.1.1.1.12.1.4 counter64 read-only
This object counts frames departing from the out-segment. It is relevant for label types = FR and MPLS.
                   gsmpLabelOutFrameDiscardCount 1.3.6.1.2.1.1.1.12.1.5 counter64 read-only
This object counts frames discarded due to congestion on the out-segment. It is relevant for label types = FR and MPLS.