GALILEO-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: GALILEO-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlGalMibVersion 1.3.6.1.4.1.89.56.1 integer read-only
MIB's version, the current version is 1.
 rlGalMode 1.3.6.1.4.1.89.56.2 integer read-only
Current mode supported by the device. Enumeration: 'base': 1, 'extended': 2.
 rlGalModeAfterReset 1.3.6.1.4.1.89.56.3 integer read-write
New mode supported by the device after the next reset. Enumeration: 'base': 1, 'extended': 2.
 rlPolicyGalileoDebugTuning 1.3.6.1.4.1.89.56.4
     rlPolicyGalileoTuningOverProvisioning 1.3.6.1.4.1.89.56.4.1 integer read-write
For non-quantitative flows: Defines the function that is used to devide the aggregate rate (dependent on the number of flows using the specific meterId). The options for this mib variables are: - overProvisioning is 1/n -> may cause severe exceeding from permitted bw. - minorOverProvisioning is 1/(n+1)-> may cause minor exceeding from permitted bw. - underProvisioning is 1/(2^n) -> usaully causes to be under the permitted bw. where n is the number of flows using the specific meterId, initial value = 1. Enumeration: 'overProvisioning': 1, 'underProvisioning': 3, 'minorOverProvisioning': 2.
     rlPolicyGalileoTuningExtremConditionBurstSize 1.3.6.1.4.1.89.56.4.2 integer read-write
This variable indicates the value of a new burst size, when the given aggregate burst size has reached the following extreme condition: (aggregateBurstSize/n) < 1536 (smaller than max MTU). The options for this mib variables are: - new burst = 0 bytes - new burst = 1536 bytes where n is the number of flows using the specific meterId. Enumeration: 'zero': 1, 'maxMt': 2.
     rlPolicyGalileoTuningOverrideOutOfProfileDropPrecedence 1.3.6.1.4.1.89.56.4.3 truthvalue read-write
This mib variable is used only when the rlPolicyGalileoTuningExtremConditionBurstSize is 0 bytes. The options for this mib variables are: - TRUE => out of profile Drop Precedence = High Drop Precedence. This value will override the rule's out of profile Drop Precedence. - FALSE => out of profile Drop Precedence is set according to the rule's decision.
 rlCosFftAgingTimeout 1.3.6.1.4.1.89.56.5 integer read-write
The aging timeout of the CoS FFT Tables.
 rlCosFftPollingInterval 1.3.6.1.4.1.89.56.6 integer read-write
The polling interval for dynamic CoS FFTs support in seconds.
 rlPolicyGalileoDebug 1.3.6.1.4.1.89.56.7
     rlPolicyGalileoDebugFcogTable 1.3.6.1.4.1.89.56.7.1 no-access
Indecate the instance of the fcog for hash_fnc calc per group type
         rlPolicyGalileoDebugFcogEntry 1.3.6.1.4.1.89.56.7.1.1 no-access
the entry per groupType indicate the offsets for hash_func calc.
             rlPolicyGalileoDebugFcogType 1.3.6.1.4.1.89.56.7.1.1.1 rlpolicygalileodebuggrouptype read-only
Specifies a the Group type for which Fcog bytes specified.
             rlPolicyGalileoDebugL2SrcAddr 1.3.6.1.4.1.89.56.7.1.1.2 truthvalue read-write
indecate if the L2 SrcAddr defined for fcog.
             rlPolicyGalileoDebugL2DstAddr 1.3.6.1.4.1.89.56.7.1.1.3 truthvalue read-write
indecate if the L2DstAddr defined for fcog.
             rlPolicyGalileoDebugVlanId 1.3.6.1.4.1.89.56.7.1.1.4 truthvalue read-write
indecate if the VlanId defined for fcog.
             rlPolicyGalileoDebugInport 1.3.6.1.4.1.89.56.7.1.1.5 truthvalue read-write
indecate if the Inport defined for fcog.
             rlPolicyGalileoDebugIpxDstNet 1.3.6.1.4.1.89.56.7.1.1.6 truthvalue read-write
indecate if the IpxDstNet defined for fcog.
             rlPolicyGalileoDebugIpxDstNode 1.3.6.1.4.1.89.56.7.1.1.7 truthvalue read-write
indecate if the IpxDstNode defined for fcog.
             rlPolicyGalileoDebugIpSrcAddr 1.3.6.1.4.1.89.56.7.1.1.8 truthvalue read-write
indecate if the IpSrcAddr defined for fcog.
             rlPolicyGalileoDebugIpDstAddr 1.3.6.1.4.1.89.56.7.1.1.9 truthvalue read-write
indecate if the IpDstAddr defined for fcog.
             rlPolicyGalileoDebugIpProtocol 1.3.6.1.4.1.89.56.7.1.1.10 truthvalue read-write
indecate if the IpProtocol defined for fcog.
             rlPolicyGalileoDebugIpSrcPort 1.3.6.1.4.1.89.56.7.1.1.11 truthvalue read-write
indecate if the IpSrcPort defined for fcog.
             rlPolicyGalileoDebugIpDstPort 1.3.6.1.4.1.89.56.7.1.1.12 truthvalue read-write
indecate if the IpDstPort defined for fcog.
             rlPolicyGalileoDebugStatus 1.3.6.1.4.1.89.56.7.1.1.13 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table.
     rlPolicyGalileoDebugFlowTable 1.3.6.1.4.1.89.56.7.2 no-access
This table will allow us to request variables from specific entry at the flowTable. only get and getNext will be supported (getNext will return alyaws EndOfMibTable)
         rlPolicyGalileoDebugFlowTableEntry 1.3.6.1.4.1.89.56.7.2.1 no-access
all the input fileds has a default val except from the groupType, request of an entry should be based on the fcog definition.
             rlPolicyGalileoDebugFlowType 1.3.6.1.4.1.89.56.7.2.1.1 rlpolicygalileodebuggrouptype read-only
Specifies a the Group type.
             rlPolicyGalileoDebugFlowRxIfIndex 1.3.6.1.4.1.89.56.7.2.1.2 integer read-only
Specifies a the IfIndex the packet arrived (for the calculation of the relevant cosTable.
             rlPolicyGalileoDebugFlowL2SrcAddr 1.3.6.1.4.1.89.56.7.2.1.3 octet string read-only
Indicate the L2SrcAddr for the requsted entry.
             rlPolicyGalileoDebugFlowL2DstAddr 1.3.6.1.4.1.89.56.7.2.1.4 octet string read-only
Indicate the L2DstAddr for the requsted entry.
             rlPolicyGalileoDebugFlowVlanId 1.3.6.1.4.1.89.56.7.2.1.5 integer read-only
Indicate the VlanId for the requsted entry.
             rlPolicyGalileoDebugFlowIpxDstNet 1.3.6.1.4.1.89.56.7.2.1.6 octet string read-only
Indicate the IPX DstNet for the requsted entry.
             rlPolicyGalileoDebugFlowIpxDstNode 1.3.6.1.4.1.89.56.7.2.1.7 octet string read-only
Indicate the IPX DstNode for the requsted entry.
             rlPolicyGalileoDebugFlowIpSrcAddr 1.3.6.1.4.1.89.56.7.2.1.8 octet string read-only
Indicate the IP SrcAddr for the requsted entry.
             rlPolicyGalileoDebugFlowIpDstAddr 1.3.6.1.4.1.89.56.7.2.1.9 octet string read-only
Indicate the IP DstAddr for the requsted entry.
             rlPolicyGalileoDebugFlowIpProtocol 1.3.6.1.4.1.89.56.7.2.1.10 integer read-only
Indicate the IP Protocol for the requsted entry.
             rlPolicyGalileoDebugFlowIpSrcPort 1.3.6.1.4.1.89.56.7.2.1.11 octet string read-only
Indicate the IP SrcPort for the requsted entry.
             rlPolicyGalileoDebugFlowIpDstPort 1.3.6.1.4.1.89.56.7.2.1.12 octet string read-only
Indicate the IP DstPort for the requsted entry.
             rlPolicyGalileoDebugFlowRetValid 1.3.6.1.4.1.89.56.7.2.1.13 truthvalue read-only
Indicate if the requsted entry is valid (exist) or not.
             rlPolicyGalileoDebugFlowRetStatic 1.3.6.1.4.1.89.56.7.2.1.14 truthvalue read-only
Indicate if the requsted entry is a static entry or not.
             rlPolicyGalileoDebugFlowRetAging 1.3.6.1.4.1.89.56.7.2.1.15 truthvalue read-only
Indicate if the Aging bit of the requested entry is set or not.
             rlPolicyGalileoDebugFlowRetCmd 1.3.6.1.4.1.89.56.7.2.1.16 integer read-only
Indicate if the CMD of the requested entry . Enumeration: 'permitAndTrap': 4, 'drop': 1, 'dropAndTrap': 2, 'permit': 3.
             rlPolicyGalileoDebugFlowRetPrio 1.3.6.1.4.1.89.56.7.2.1.17 integer read-only
Indicate if the Pri/Sc of the requested entry .
             rlPolicyGalileoDebugFlowRetInProfileDis 1.3.6.1.4.1.89.56.7.2.1.18 integer read-only
Indicate if the inProfile Discardability of the requested entry . Enumeration: 'high': 2, 'drop': 3, 'low': 1.
             rlPolicyGalileoDebugFlowRetVpt 1.3.6.1.4.1.89.56.7.2.1.19 integer read-only
Indicate if the Vpt of the requested entry .
             rlPolicyGalileoDebugFlowRetChangeTos 1.3.6.1.4.1.89.56.7.2.1.20 truthvalue read-only
Indicate if the Change Tos of the requested entry is set or not.
             rlPolicyGalileoDebugFlowRetNewTos 1.3.6.1.4.1.89.56.7.2.1.21 integer read-only
Indicate if the New Tos of the requested entry.
             rlPolicyGalileoDebugFlowRetVlanId 1.3.6.1.4.1.89.56.7.2.1.22 integer read-only
Indicate if the VlanId of the requested entry.
             rlPolicyGalileoDebugFlowRetInIfIndex 1.3.6.1.4.1.89.56.7.2.1.23 integer read-only
Indicate if the InIfindex of the requested entry.
             rlPolicyGalileoDebugFlowRetEnableMeter 1.3.6.1.4.1.89.56.7.2.1.24 truthvalue read-only
Indicate if Meter of the requested entry is enbled or not.
             rlPolicyGalileoDebugFlowRetOutProfileDis 1.3.6.1.4.1.89.56.7.2.1.25 integer read-only
Indicate the outProfile Discardability of the requested entry . Enumeration: 'high': 2, 'drop': 3, 'low': 1.
 rlPolicyGalileoFcuFwdCpuCounter 1.3.6.1.4.1.89.56.8 integer read-only
Count the number of packets that forward from the Flow Classification Unit to the CPU
 rlPolicySimpleGalMib 1.3.6.1.4.1.89.56.9
     rlPolicySimpleGalMibVersion 1.3.6.1.4.1.89.56.9.1 integer read-only
MIB's version, the current version is 1.
     rlPolicySimpleGalMibPortTypeSupport 1.3.6.1.4.1.89.56.9.2 octet string read-only
return a bit mask that indicates the supported port type: ---------- |87654321| ---------- 1 - BoundaryType 2 - InteriorType
     rlPolicySimpleGalMibRecalculateRules 1.3.6.1.4.1.89.56.9.3 integer read-write
Setting any value will cause recalculation of all the rules. Enumeration: 'recalculate': 1.
     rlPolicySimpleGalMibPolicyEnable 1.3.6.1.4.1.89.56.9.4 truthvalue read-write
Enables or disables the policy feature
     rlPolicySimpleGalMibProfileTable 1.3.6.1.4.1.89.56.9.5 no-access
The table defines all the profiles.
         rlPolicySimpleGalMibProfileEntry 1.3.6.1.4.1.89.56.9.5.1 no-access
The entry define one profile.
             rlPolicySimpleGalMibIndex 1.3.6.1.4.1.89.56.9.5.1.1 integer read-only
This enumerates the table entry.
             rlPolicySimpleGalMibDescription 1.3.6.1.4.1.89.56.9.5.1.2 displaystring read-write
Informational text given by the user to describe the profile.
             rlPolicySimpleGalMibProfileType 1.3.6.1.4.1.89.56.9.5.1.3 rlpolicysimplegalmibprofiletype read-write
Specifies a profile type.
             rlPolicySimpleGalMibRate 1.3.6.1.4.1.89.56.9.5.1.4 integer read-write
The rate in kilobytes/second for the specified profile, or in the case of minDelay per session profile type the rate will indicate the rate per individual session
             rlPolicySimpleGalMibBurstSize 1.3.6.1.4.1.89.56.9.5.1.5 integer read-write
The burst size parameter. A value of 0 means that the device should choose the Burst Size that is most suitable for the profile.
             rlPolicySimpleGalMibMaxSession 1.3.6.1.4.1.89.56.9.5.1.6 integer read-write
Relevant only for the minDelay per session. Indicate the maximum number of sessions for this profile.
             rlPolicySimpleGalMibNewVpt 1.3.6.1.4.1.89.56.9.5.1.7 integer read-write
Indicates the new VPT to assign to the packet.
             rlPolicySimpleGalMibChangeTosOrDscp 1.3.6.1.4.1.89.56.9.5.1.8 truthvalue read-write
Indicates whether the TOS or DSCP should be remarked with a new value
             rlPolicySimpleGalMibNewTosOrDscp 1.3.6.1.4.1.89.56.9.5.1.9 integer read-write
Indicates the new value for the TOS or DSCP. Relevant only if rlPolicySimpleGalMibChangeTosOrDscp is true.
             rlPolicySimpleGalMibStatus 1.3.6.1.4.1.89.56.9.5.1.10 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table.
     rlPolicySimpleGalMibIpFcogTable 1.3.6.1.4.1.89.56.9.6 no-access
This table defines the used fields for ip classification, per port type (interior/boundary)
         rlPolicySimpleGalMibIpFcogEntry 1.3.6.1.4.1.89.56.9.6.1 no-access
the entry define the used fields for classification
             rlPolicySimpleGalMibIpFcogPortType 1.3.6.1.4.1.89.56.9.6.1.1 rlpolicysimplegalmibporttype read-only
The port type (interior/boundary) to which this entry applies.
             rlPolicySimpleGalMibIpFcogTosOrDscp 1.3.6.1.4.1.89.56.9.6.1.2 truthvalue read-write
Indicates whether the IP TOS or DSCP field will be used in classifiers or not.
             rlPolicySimpleGalMibIpFcogProtocol 1.3.6.1.4.1.89.56.9.6.1.3 truthvalue read-write
Indicates whether the IP L4 protocol field will be used in classifiers or not.
             rlPolicySimpleGalMibIpFcogSrcIpMask 1.3.6.1.4.1.89.56.9.6.1.4 integer read-write
Indicates the number of most significant bits of the Ip Address that are used in specifying IP source addresses in classifiers.
             rlPolicySimpleGalMibIpFcogDstIpMask 1.3.6.1.4.1.89.56.9.6.1.5 integer read-write
Indicates the number of most significant bits of the Ip Address that are used in specifying IP destination addresses in classifiers.
             rlPolicySimpleGalMibIpFcogSrcPort 1.3.6.1.4.1.89.56.9.6.1.6 truthvalue read-write
Indicates whether the IP L4 protocol source port field will be used in classifiers or not.
             rlPolicySimpleGalMibIpFcogDstPort 1.3.6.1.4.1.89.56.9.6.1.7 truthvalue read-write
Indicates whether the IP L4 protocol destination port field will be used in classifiers or not.
             rlPolicySimpleGalMibIpFcogInIfIndex 1.3.6.1.4.1.89.56.9.6.1.8 truthvalue read-write
Indicates whether ifIndex of input ports will be used in classifiers or not.
     rlPolicySimpleGalMibIpRulesTable 1.3.6.1.4.1.89.56.9.7 no-access
This table contains the policy rules defined by the user. The order of the entries in the table is important, since the first rule that applies to the incoming packet will be acted upon, ignoring any further rules that may apply as well.
         rlPolicySimpleGalMibIpRulesEntry 1.3.6.1.4.1.89.56.9.7.1 no-access
This entry defines one policy rule.
             rlPolicySimpleGalMibIpRulesPortType 1.3.6.1.4.1.89.56.9.7.1.1 rlpolicysimplegalmibporttype read-only
The port type (interior/boundary) to which this rule applies.
             rlPolicySimpleGalMibIpRulesIndex 1.3.6.1.4.1.89.56.9.7.1.2 integer read-only
This enumerates the table. The user should assign indices in such a way that there will be a gap big enough between one rule and the next to allow insertion of additional rules in between (a gap of 1000 is recommended).
             rlPolicySimpleGalMibIpRulesDescription 1.3.6.1.4.1.89.56.9.7.1.3 displaystring read-write
Informational text given by the user to describe the rule.
             rlPolicySimpleGalMibIpRulesTosOrDscp 1.3.6.1.4.1.89.56.9.7.1.4 integer read-write
Indicates the TOS or DSCP to compare with.
             rlPolicySimpleGalMibIpRulesProtocol 1.3.6.1.4.1.89.56.9.7.1.5 integer read-write
Indicates the L4 protocol to compare with.
             rlPolicySimpleGalMibIpRulesSrcIp 1.3.6.1.4.1.89.56.9.7.1.6 ipaddress read-write
Indicates the source IP address to compare with.
             rlPolicySimpleGalMibIpRulesSrcIpMask 1.3.6.1.4.1.89.56.9.7.1.7 integer read-write
Indicates the number of most significant bits of the Ip Address that are used in specifying IP source addresses in classifiers.
             rlPolicySimpleGalMibIpRulesDstIp 1.3.6.1.4.1.89.56.9.7.1.8 ipaddress read-write
Indicates the destination IP address to compare with.
             rlPolicySimpleGalMibIpRulesDstIpMask 1.3.6.1.4.1.89.56.9.7.1.9 integer read-write
Indicates the number of most significant bits of the Ip Address that are used in specifying IP destination addresses in classifiers.
             rlPolicySimpleGalMibIpRulesSrcPort 1.3.6.1.4.1.89.56.9.7.1.10 integer read-write
Indicates the source L4 port to compare with.
             rlPolicySimpleGalMibIpRulesDstPort 1.3.6.1.4.1.89.56.9.7.1.11 integer read-write
Indicates the destination L4 port to compare with.
             rlPolicySimpleGalMibIpRulesInIfIndexList 1.3.6.1.4.1.89.56.9.7.1.12 portlist read-write
Indicates the list of input ports to which this rule applies.
             rlPolicySimpleGalMibIpRulesCondition 1.3.6.1.4.1.89.56.9.7.1.13 integer read-write
Indicate the relation that should hold for each relevant field of the rule in comparison to the packet's field. Enumeration: 'notEqual': 2, 'smaller': 4, 'equal': 1, 'bigger': 3.
             rlPolicySimpleGalMibIpRulesAction 1.3.6.1.4.1.89.56.9.7.1.14 integer read-write
Indicates the action to be performed if there is a match with the rule. Enumeration: 'permitAndTrap': 3, 'permit': 4, 'block': 1, 'blockAndTrap': 2.
             rlPolicySimpleGalMibIpRulesProfilePointer 1.3.6.1.4.1.89.56.9.7.1.15 integer read-write
Indicates the profile attached to the rule. The value is the index in the profile table of the attached profile. Value 0 means that no profile is attached to the rule and is valid only in case of action block.
             rlPolicySimpleGalMibIpRulesOutIfIndexList 1.3.6.1.4.1.89.56.9.7.1.16 portlist read-write
Indicates the list of output ports to on which bandwidth should be allocated for this rule.
             rlPolicySimpleGalMibIpRulesBitsUsed 1.3.6.1.4.1.89.56.9.7.1.17 octet string read-write
a bit mask that indicates the the used fields for the entry: (the implemention is identical to BITS implementation,from MSB to LSB) ---------- |87654321| ---------- 8 - tosOrDscp 7 - Protocol 6 - SrcIp 5 - DstIp 4 - SrcIpPort 3 - DstIpPort
             rlPolicySimpleGalMibIpRulesErrorDescrip 1.3.6.1.4.1.89.56.9.7.1.18 displaystring read-only
A description error indicate the user about the specific error. The error can cause by one of the following reasons: 1. if the profile was asign to the rule could not be perform 2. if the operation of QoS portLock failed
             rlPolicySimpleGalMibIpRulesStatus 1.3.6.1.4.1.89.56.9.7.1.19 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table. notInService is used to disable an entry. notReady will be assigned by the device to indicate that the rule can not be active because some ports in the output ports list are not in a state allowing bandwidth allocation guarantee.
     rlPolicySimpleGalMibIpxFcogTable 1.3.6.1.4.1.89.56.9.8 no-access
This table defines the used fields for ipx classification
         rlPolicySimpleGalMibIpxFcogEntry 1.3.6.1.4.1.89.56.9.8.1 no-access
the entry defines the used fields for classification
             rlPolicySimpleGalMibIpxFcogIndex 1.3.6.1.4.1.89.56.9.8.1.1 integer read-only
the table index - only one entry exist
             rlPolicySimpleGalMibIpxFcogDstNet 1.3.6.1.4.1.89.56.9.8.1.2 octet string read-write
Indicates the parts of the field in use in the rules
             rlPolicySimpleGalMibIpxFcogDstNode 1.3.6.1.4.1.89.56.9.8.1.3 octet string read-write
Indicates the parts of the field in use in the rules
             rlPolicySimpleGalMibIpxFcogDstSocket 1.3.6.1.4.1.89.56.9.8.1.4 truthvalue read-write
Indicates whether the field is in use in the rules
             rlPolicySimpleGalMibIpxFcogSrcNet 1.3.6.1.4.1.89.56.9.8.1.5 octet string read-write
Indicates the parts of the field in use in the rules
             rlPolicySimpleGalMibIpxFcogSrcNode 1.3.6.1.4.1.89.56.9.8.1.6 octet string read-write
Indicates the parts of the field in use in the rules
             rlPolicySimpleGalMibIpxFcogSrcSocket 1.3.6.1.4.1.89.56.9.8.1.7 truthvalue read-write
Indicates whether the field is in use in the rules
             rlPolicySimpleGalMibIpxFcogInIfIndex 1.3.6.1.4.1.89.56.9.8.1.8 truthvalue read-write
Indicates whether the field is in use in the rules
     rlPolicySimpleGalMibIpxRulesTable 1.3.6.1.4.1.89.56.9.9 no-access
This table contains the policy rules defined by the user. The order of the entries in the table is important, since the first rule that matches the incoming packet will be acted upon, ignoring any further rules that may match as well.
         rlPolicySimpleGalMibIpxRulesEntry 1.3.6.1.4.1.89.56.9.9.1 no-access
This entry defines one policy rule.
             rlPolicySimpleGalMibIpxRulesIndex 1.3.6.1.4.1.89.56.9.9.1.1 integer read-only
This enumerates the table. The user should assign indices in such a way that there will be a gap big enough between one rule and the next to allow insertion of additional rules in between (a gap of 1000 is recommended).
             rlPolicySimpleGalMibIpxRulesDescription 1.3.6.1.4.1.89.56.9.9.1.2 displaystring read-write
Informational text given by the user to describe the rule.
             rlPolicySimpleGalMibIpxRulesDstNet 1.3.6.1.4.1.89.56.9.9.1.3 octet string read-write
Indicate the ipxDst Net to compare to
             rlPolicySimpleGalMibIpxRulesDstNode 1.3.6.1.4.1.89.56.9.9.1.4 octet string read-write
Indicate the ipxDstNode to compare to
             rlPolicySimpleGalMibIpxRulesDstSocket 1.3.6.1.4.1.89.56.9.9.1.5 integer read-write
Indicate the ipx DstSocket to compare to
             rlPolicySimpleGalMibIpxRulesSrcNet 1.3.6.1.4.1.89.56.9.9.1.6 octet string read-write
Indicate the ipxSrc Net to compare to
             rlPolicySimpleGalMibIpxRulesSrcNode 1.3.6.1.4.1.89.56.9.9.1.7 octet string read-write
Indicate the ipxSrcNode to compare to
             rlPolicySimpleGalMibIpxRulesSrcSocket 1.3.6.1.4.1.89.56.9.9.1.8 integer read-write
Indicate the ipx SrcSocket to compare to
             rlPolicySimpleGalMibIpxRulesInIfIndexList 1.3.6.1.4.1.89.56.9.9.1.9 portlist read-write
Indicates the list of input ports to which this rule applies.
             rlPolicySimpleGalMibIpxRulesCondition 1.3.6.1.4.1.89.56.9.9.1.10 integer read-write
Indicate the relation that should hold for each relevant field of the rule in comparison to the packet's. Enumeration: 'notEqual': 2, 'smaller': 4, 'equal': 1, 'bigger': 3.
             rlPolicySimpleGalMibIpxRulesAction 1.3.6.1.4.1.89.56.9.9.1.11 integer read-write
Indicates the action to be performed if the rule matches. Enumeration: 'permitAndTrap': 3, 'permit': 4, 'block': 1, 'blockAndTrap': 2.
             rlPolicySimpleGalMibIpxRulesProfilePointer 1.3.6.1.4.1.89.56.9.9.1.12 integer read-write
Indicates the profile attached to the rule. The value is the index in the profile table of the attached profile. Value 0 means that no profile is attached to the rule and is valid only in case of action block.
             rlPolicySimpleGalMibIpxRulesOutIfIndexList 1.3.6.1.4.1.89.56.9.9.1.13 portlist read-write
Indicates the list of output ports on which bandwidth should be allocated for this rule.
             rlPolicySimpleGalMibIpxRulesStatus 1.3.6.1.4.1.89.56.9.9.1.14 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table. notInService is used to disable an entry. notReady will be assigned by the device to indicate that the rule can not be active because some ports in the output ports list are not in a state allowing bandwidth allocation guarantee.
     rlPolicySimpleGalMibBridgeFcogTable 1.3.6.1.4.1.89.56.9.10 no-access
The table defines the used fields for Bridge classification
           rlPolicySimpleGalMibBridgeFcogEntry 1.3.6.1.4.1.89.56.9.10.1 no-access
the entry defines the used fields for classification
               rlPolicySimpleGalMibBridgeFcogIndex 1.3.6.1.4.1.89.56.9.10.1.1 integer read-only
the table index - only one entry exist
               rlPolicySimpleGalMibBridgeFcogDstMac 1.3.6.1.4.1.89.56.9.10.1.2 octet string read-write
Indicate the use of the field in the rules
               rlPolicySimpleGalMibBridgeFcogSrcMac 1.3.6.1.4.1.89.56.9.10.1.3 octet string read-write
Indicate the use of the field in the rules
               rlPolicySimpleGalMibBridgeFcogVid 1.3.6.1.4.1.89.56.9.10.1.4 truthvalue read-write
Indicate whether the field is in use in the rules
               rlPolicySimpleGalMibBridgeFcogInIfIndex 1.3.6.1.4.1.89.56.9.10.1.5 truthvalue read-write
Indicate whether the field is in use in the rules
               rlPolicySimpleGalMibBridgeFcogEthType 1.3.6.1.4.1.89.56.9.10.1.6 truthvalue read-write
Indicate whether the field is in use in the rules
               rlPolicySimpleGalMibBridgeFcogIpTosOrDscp 1.3.6.1.4.1.89.56.9.10.1.7 truthvalue read-write
Indicate whether the field is in use in the rules
               rlPolicySimpleGalMibBridgeFcogIpProtocol 1.3.6.1.4.1.89.56.9.10.1.8 truthvalue read-write
Indicate whether the field is in use in the rules
               rlPolicySimpleGalMibBridgeFcogIpSrcIpMask 1.3.6.1.4.1.89.56.9.10.1.9 integer read-write
Indicate the number of used bits of the Ip Address from the left
               rlPolicySimpleGalMibBridgeFcogIpDstIpMask 1.3.6.1.4.1.89.56.9.10.1.10 integer read-write
Indicate the number of used bits of the Ip Address from the left
               rlPolicySimpleGalMibBridgeFcogIpSrcPort 1.3.6.1.4.1.89.56.9.10.1.11 truthvalue read-write
Indicate whether the field is in use in the rules
               rlPolicySimpleGalMibBridgeFcogIpDstPort 1.3.6.1.4.1.89.56.9.10.1.12 truthvalue read-write
Indicate whether the field is in use in the rules
     rlPolicySimpleGalMibBridgeRulesTable 1.3.6.1.4.1.89.56.9.11 no-access
This table contains the policy rules defined by the user. The order of the entries in the table is important, since the first rule that applies to the incoming packet will be acted upon, ignoring any further rules that may apply as well.
           rlPolicySimpleGalMibBridgeRulesEntry 1.3.6.1.4.1.89.56.9.11.1 no-access
This entry defines one policy rule.
               rlPolicySimpleGalMibBridgeRulesIndex 1.3.6.1.4.1.89.56.9.11.1.1 integer read-only
This enumerates the table. The user should assign indices in such a way that there will be a gap big enough between one rule and the next to allow insertion of additional rules in between (a gap of 1000 is recommended).
               rlPolicySimpleGalMibBridgeRulesDescription 1.3.6.1.4.1.89.56.9.11.1.2 displaystring read-write
Informational text given by the user to describe the rule.
               rlPolicySimpleGalMibBridgeRulesDstMac 1.3.6.1.4.1.89.56.9.11.1.3 octet string read-write
Indicate the Dst mac to compare
               rlPolicySimpleGalMibBridgeRulesSrcMac 1.3.6.1.4.1.89.56.9.11.1.4 octet string read-write
Indicate the source mac to compare
               rlPolicySimpleGalMibBridgeRulesVid 1.3.6.1.4.1.89.56.9.11.1.5 integer read-write
Indicate the vlanId to compare
               rlPolicySimpleGalMibBridgeRulesInIfIndexList 1.3.6.1.4.1.89.56.9.11.1.6 portlist read-write
Indicates the list of input ports to which this rule applies.
               rlPolicySimpleGalMibBridgeRulesEthType 1.3.6.1.4.1.89.56.9.11.1.7 integer read-write
Indicate the Ethernet type of the packet
               rlPolicySimpleGalMibBridgeRulesIpTosOrDscp 1.3.6.1.4.1.89.56.9.11.1.8 integer read-write
Indicates the tos or dscp to compare
               rlPolicySimpleGalMibBridgeRulesIpProtocol 1.3.6.1.4.1.89.56.9.11.1.9 integer read-write
Indicates the protocol to compare
               rlPolicySimpleGalMibBridgeRulesIpSrcIp 1.3.6.1.4.1.89.56.9.11.1.10 ipaddress read-write
Indicate the srcIp to compare
               rlPolicySimpleGalMibBridgeRulesIpDstIp 1.3.6.1.4.1.89.56.9.11.1.11 ipaddress read-write
Indicate the DstIp to compare
               rlPolicySimpleGalMibBridgeRulesIpSrcPort 1.3.6.1.4.1.89.56.9.11.1.12 integer read-write
Indicate the Src port to compare
               rlPolicySimpleGalMibBridgeRulesIpDstPort 1.3.6.1.4.1.89.56.9.11.1.13 integer read-write
Indicate the Src port to compare
               rlPolicySimpleGalMibBridgeRulesCondition 1.3.6.1.4.1.89.56.9.11.1.14 integer read-write
Indicate the relation that should hold for each relevant field of the rule in comparison to the packet's field. Enumeration: 'notEqual': 2, 'smaller': 4, 'equal': 1, 'bigger': 3.
               rlPolicySimpleGalMibBridgeRulesAction 1.3.6.1.4.1.89.56.9.11.1.15 integer read-write
Indicates the action to be performed if there is a match with the rule. Enumeration: 'permitAndTrap': 3, 'permit': 4, 'block': 1, 'blockAndTrap': 2.
               rlPolicySimpleGalMibBridgeRulesProfilePointer 1.3.6.1.4.1.89.56.9.11.1.16 integer read-write
Indicates the profile attached to the rule. The value is the index in the profile table of the attached profile. Value 0 means that no profile is attached to the rule and is valid only in case of action block.
               rlPolicySimpleGalMibBridgeRulesOutIfIndexList 1.3.6.1.4.1.89.56.9.11.1.17 portlist read-write
Indicates the list of output ports to on which bandwidth should be allocated for this rule.
               rlPolicySimpleGalMibBridgeRulesStatus 1.3.6.1.4.1.89.56.9.11.1.18 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table. notInService is used to disable an entry. notReady will be assigned by the device to indicate that the rule can not be active because some ports in the output ports list are not in a state allowing bandwidth allocation guarantee.
     rlPolicySimpleGalMibPortTable 1.3.6.1.4.1.89.56.9.12 no-access
The table defines all of the ports types
           rlPolicySimpleGalMibPortEntry 1.3.6.1.4.1.89.56.9.12.1 no-access
An entry defines a port's type
               rlPolicySimpleGalMibPortIfIndex 1.3.6.1.4.1.89.56.9.12.1.1 integer read-only
This enumerates the table entry.
               rlPolicySimpleGalMibPortType 1.3.6.1.4.1.89.56.9.12.1.2 rlpolicysimplegalmibporttype read-write
Defines the port type
 rlGalPolicyMode 1.3.6.1.4.1.89.56.10 integer read-only
Indicates whether the QoS is for: -All Bridged packets; or -All routed IP packets. The value cannot change after system init Enumeration: 'routedIp': 2, 'bridged': 1.