G6-WIFI-MIB: View SNMP OID List / Download MIB

VENDOR: MICROSENS


 Home MIB: G6-WIFI-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, MICROSENS-G6-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 device 1.3.6.1.4.1.3181.10.6.1
Microsens private MIB for Generation 6 Ethernet Switches
     wifi 1.3.6.1.4.1.3181.10.6.1.98
           wifiEnableWifi 1.3.6.1.4.1.3181.10.6.1.98.1 integer read-write
Generally enable the access point and its wireless interface. Enumeration: 'disabled': 0, 'enabled': 1.
           accessPointTable 1.3.6.1.4.1.3181.10.6.1.98.2 no-access
Basic settings of the access point.
               accessPointEntry 1.3.6.1.4.1.3181.10.6.1.98.2.1 no-access
                   accessPointIndex 1.3.6.1.4.1.3181.10.6.1.98.2.1.1 integer no-access
Automatically generated
                   accessPointHostname 1.3.6.1.4.1.3181.10.6.1.98.2.1.2 displaystring read-write
Access point hostname.
                   accessPointDeviceIp 1.3.6.1.4.1.3181.10.6.1.98.2.1.3 octet string read-write
Static device IP address of the access point.
                   accessPointSubnetMask 1.3.6.1.4.1.3181.10.6.1.98.2.1.4 octet string read-write
Static subnet mask.
                   accessPointGateway 1.3.6.1.4.1.3181.10.6.1.98.2.1.5 octet string read-write
Default gateway IP address. When DHCP is enabled, DHCP has preference over this setting.
                   accessPointUpdateFirmware 1.3.6.1.4.1.3181.10.6.1.98.2.1.6 displaystring read-write
Update the access point firmware. When no file name is supplied, the latest version is automatically selected. Alternatively, a specific file name can be supplied to use another version. Use Management.files.firmware.display_files to view a list of available files under the AP section.
                   accessPointReboot 1.3.6.1.4.1.3181.10.6.1.98.2.1.7 displaystring read-write
This command will restart the access point only. All wireless communication will be disrupted for about a minute! Syntax: reboot = CONFIRM.
           interfaceTable 1.3.6.1.4.1.3181.10.6.1.98.3 no-access
This table defines the Ethernet interface available via Wifi
               interfaceEntry 1.3.6.1.4.1.3181.10.6.1.98.3.1 no-access
                   interfaceIndex 1.3.6.1.4.1.3181.10.6.1.98.3.1.1 integer no-access
Automatically generated
                   interfaceCountryCode 1.3.6.1.4.1.3181.10.6.1.98.3.1.2 displaystring read-write
International country code. Use DE for Germany, FR for france, etc.
                   interfaceSsid 1.3.6.1.4.1.3181.10.6.1.98.3.1.3 displaystring read-write
Defines the name under which the access point can be reached. This will be displayed as network name.
                   interfaceEnterPresharedKey 1.3.6.1.4.1.3181.10.6.1.98.3.1.4 displaystring read-write
Enter the password required to access the network. No spaces are permitted and at least 8 character are required.
                   interfaceEncryptedPresharedKey 1.3.6.1.4.1.3181.10.6.1.98.3.1.5 displaystring read-write
Encrypted form of the entered key. This is automatically filled in when the enter_fa_auth command is executed.
                   interfaceExposeSsid 1.3.6.1.4.1.3181.10.6.1.98.3.1.6 integer read-write
Defines whether the network can be detected or is hidden. Enumeration: 'visible': 1, 'hidden': 0.
                   interfaceEncryption 1.3.6.1.4.1.3181.10.6.1.98.3.1.7 integer read-write
Enumeration: 'wpaPsk2': 3, 'none': 0, 'wep': 1, 'wpaPsk': 2.
                   interfaceDhcpServer 1.3.6.1.4.1.3181.10.6.1.98.3.1.8 integer read-write
Enable DHCP server to automatically provide an IP address to the attached wifi devices. Enumeration: 'disabled': 0, 'enabled': 1.
                   interfaceDhcpStartAddress 1.3.6.1.4.1.3181.10.6.1.98.3.1.9 octet string read-write
Lowest address served.
                   interfaceDhcpNumberOfAddresses 1.3.6.1.4.1.3181.10.6.1.98.3.1.10 integer32 read-write
The number of IP addresses served starting from the dhcp_start_address
                   interfaceChannelNumber 1.3.6.1.4.1.3181.10.6.1.98.3.1.11 unsigned32 read-write
Zero is automatic selection.
                   interfaceChannelWidth 1.3.6.1.4.1.3181.10.6.1.98.3.1.12 integer read-write
Enumeration: 'ht40n': 3, 'ht40p': 2, 'ht20': 1.
           firewallConfigTable 1.3.6.1.4.1.3181.10.6.1.98.4 no-access
Each entry of this variable table defines the details of one test case.
               firewallConfigEntry 1.3.6.1.4.1.3181.10.6.1.98.4.1 no-access
                   firewallConfigIndex 1.3.6.1.4.1.3181.10.6.1.98.4.1.1 integer no-access
Automatically generated
                   firewallConfigEnableIngressFirewall 1.3.6.1.4.1.3181.10.6.1.98.4.1.2 integer read-write
When disabled the ingress_firewall table is not in effect. This is intended for test purposes only. Enumeration: 'disabled': 0, 'enabled': 1.
                   firewallConfigEnableEgressFirewall 1.3.6.1.4.1.3181.10.6.1.98.4.1.3 integer read-write
When disabled the ingress_firewall table is not in effect. This is intended for test purposes only. Enumeration: 'disabled': 0, 'enabled': 1.
                   firewallConfigDropInvalidPackets 1.3.6.1.4.1.3181.10.6.1.98.4.1.4 integer read-write
Drop invalid packets, not matching any active connection. Enumeration: 'disabled': 0, 'enabled': 1.
                   firewallConfigSynRateLimiting 1.3.6.1.4.1.3181.10.6.1.98.4.1.5 integer32 read-write
Defines how many SYN request are accepted per second. When the limit is reached, a SYN flooding attack is assumed and the port is protected. The value 0 disables the rate limit check.
                   firewallConfigUseSynCookies 1.3.6.1.4.1.3181.10.6.1.98.4.1.6 integer read-write
SYN cookie is a technique used to resist SYN flooding attacks. Enumeration: 'disabled': 0, 'enabled': 1.
                   firewallConfigTcpWindowScaling 1.3.6.1.4.1.3181.10.6.1.98.4.1.7 integer read-write
Enable TCP window scaling. Enumeration: 'disabled': 0, 'enabled': 1.
           firewallRulesTable 1.3.6.1.4.1.3181.10.6.1.98.5 no-access
Firewall settings for traffic ingressing on the wifi interface.
               firewallRulesEntry 1.3.6.1.4.1.3181.10.6.1.98.5.1 no-access
                   firewallRulesIndex 1.3.6.1.4.1.3181.10.6.1.98.5.1.1 integer no-access
Automatically generated
                   firewallRulesIncomingAclList 1.3.6.1.4.1.3181.10.6.1.98.5.1.2 displaystring read-write
Name of the ACL (access control list) which declares which ACL applies to incoming traffic (redirects). Several ACL may be specified with a comma separated list. Example acl1, otherlist
                   firewallRulesIncomingAclDefault 1.3.6.1.4.1.3181.10.6.1.98.5.1.3 integer read-write
Defines which action is taken when none of the ACL records matches. Default is deny which blocks all traffic. Enumeration: 'deny': 0, 'permit': 1.
                   firewallRulesOutgoingAclList 1.3.6.1.4.1.3181.10.6.1.98.5.1.4 displaystring read-write
Name of the ACL (access control list) which declares which ACL applies to incoming traffic (redirects). Several ACL may be specified with a comma separated list. Example acl1, otherlist
                   firewallRulesOutgoingAclDefault 1.3.6.1.4.1.3181.10.6.1.98.5.1.5 integer read-write
Defines which action is taken when none of the ACL records matches. Default is deny which blocks all traffic. Enumeration: 'deny': 0, 'permit': 1.
           statusTable 1.3.6.1.4.1.3181.10.6.1.98.100 no-access
Indicates basic WIFI releated status inormation
                   statusEntry 1.3.6.1.4.1.3181.10.6.1.98.100.1 no-access
                       statusIndex 1.3.6.1.4.1.3181.10.6.1.98.100.1.1 integer no-access
Automatically generated
                       statusOverallStatus 1.3.6.1.4.1.3181.10.6.1.98.100.1.2 integer read-only
Indicates if WIFI module is operational. Enumeration: 'disabled': 1, 'fault': 2, 'notPresent': 0, 'operational': 3.
                       statusNumberOfConnections 1.3.6.1.4.1.3181.10.6.1.98.100.1.3 unsigned32 read-only
           ipV4StatusTable 1.3.6.1.4.1.3181.10.6.1.98.101 no-access
This section shows a summary of IPv4 settings as they are currently active. These may reflect the statically configured values or may be dynamically assigned using DHCP.
                   ipV4StatusEntry 1.3.6.1.4.1.3181.10.6.1.98.101.1 no-access
                       ipV4StatusIndex 1.3.6.1.4.1.3181.10.6.1.98.101.1.1 integer no-access
Automatically generated
                       ipV4StatusDynamicDeviceIp 1.3.6.1.4.1.3181.10.6.1.98.101.1.2 octet string read-only
Currently used access point IP address.
                       ipV4StatusDynamicSubnetMask 1.3.6.1.4.1.3181.10.6.1.98.101.1.3 octet string read-only
Currently used access point subnet mask.
                       ipV4StatusDynamicGateway 1.3.6.1.4.1.3181.10.6.1.98.101.1.4 octet string read-only
Currently used access point gateway IP address.