G6-SMARTOFFICE-MIB: View SNMP OID List / Download MIB

VENDOR: MICROSENS


 Home MIB: G6-SMARTOFFICE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, MICROSENS-G6-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 device 1.3.6.1.4.1.3181.10.6.4
Microsens private MIB for Generation 6 Ethernet Switches
     smartoffice 1.3.6.1.4.1.3181.10.6.4.99
           smartofficeEnableSmartOffice 1.3.6.1.4.1.3181.10.6.4.99.1 integer read-write
Generally enable the SmartOffice solution. Enumeration: 'disabled': 0, 'enabled': 1.
           directorConfigTable 1.3.6.1.4.1.3181.10.6.4.99.2 no-access
General configuration of the director.
               directorConfigEntry 1.3.6.1.4.1.3181.10.6.4.99.2.1 no-access
                   directorConfigIndex 1.3.6.1.4.1.3181.10.6.4.99.2.1.1 integer no-access
Automatically generated
                   directorConfigDomainName 1.3.6.1.4.1.3181.10.6.4.99.2.1.2 displaystring read-write
                   directorConfigGeneralMode 1.3.6.1.4.1.3181.10.6.4.99.2.1.3 integer read-write
Enumeration: 'disabled': 0, 'passive': 2, 'automatic': 1.
                   directorConfigActOnUngroupedSensors 1.3.6.1.4.1.3181.10.6.4.99.2.1.4 integer read-write
When set any sensor attributes which are not configured to be part of a sensor group, will also trigger the regular script execution. This may be selected in smaller setups to save the effort of defining groups. Note that no event rate limiting can be applied to ungrouped sensors and thus using this mode can result in overloading the system leading to sluggish response times. Enumeration: 'disabled': 0, 'enabled': 1.
                   directorConfigScanLightControllers 1.3.6.1.4.1.3181.10.6.4.99.2.1.5 displaystring read-write
Scan the local network for reachable SmartLightController and display a list.
           deviceConfigTable 1.3.6.1.4.1.3181.10.6.4.99.3 no-access
Defines the configuration of each device under control. A device may contain one or more actor or sensor functions.
               deviceConfigEntry 1.3.6.1.4.1.3181.10.6.4.99.3.1 no-access
                   deviceConfigIndex 1.3.6.1.4.1.3181.10.6.4.99.3.1.1 integer no-access
Automatically generated
                   deviceConfigDeviceName 1.3.6.1.4.1.3181.10.6.4.99.3.1.2 displaystring read-write
Unique group name referenced by the director
                   deviceConfigLocation 1.3.6.1.4.1.3181.10.6.4.99.3.1.3 displaystring read-write
Free text to describe the position of the controller on the premesis. This value need NOT be savedwithin the sensor itself.
                   deviceConfigLatitude 1.3.6.1.4.1.3181.10.6.4.99.3.1.4 displaystring read-write
A value in degrees such as: 50,123
                   deviceConfigLongitude 1.3.6.1.4.1.3181.10.6.4.99.3.1.5 displaystring read-write
A value in degrees such as: 50,123
                   deviceConfigAltitude 1.3.6.1.4.1.3181.10.6.4.99.3.1.6 displaystring read-write
A value in meters.
                   deviceConfigPlacement 1.3.6.1.4.1.3181.10.6.4.99.3.1.7 integer read-write
Information where to find the controller Enumeration: 'ceiling': 3, 'floor': 1, 'wall': 2, 'duct': 4, 'outside': 5, 'desk': 6, 'unset': 0.
                   deviceConfigProductType 1.3.6.1.4.1.3181.10.6.4.99.3.1.8 integer read-write
Defines via which network the sensor is reachable. Enumeration: 'directorCascade': 2, 'fhem': 4, 'smartlightController': 1, 'virtual': 0, 'ip500': 5, 'knx': 7, 'hm': 3, 'enocean': 6.
                   deviceConfigDeviceId 1.3.6.1.4.1.3181.10.6.4.99.3.1.9 displaystring read-write
Unique manufacturer dependent identifier of the device. For SmartLightController the MAC address of the controller is entered here.
                   deviceConfigNetworkAddress 1.3.6.1.4.1.3181.10.6.4.99.3.1.10 displaystring read-write
May be an IP or other type of address depending on the given network access method. Can be left blank for a SmartLightController.
                   deviceConfigAdditionalParameter 1.3.6.1.4.1.3181.10.6.4.99.3.1.11 displaystring read-write
Comma separated list of any parameter specific for this device. Example: panel=type A,refresh_rate=12
                   deviceConfigNetworkFailureAction 1.3.6.1.4.1.3181.10.6.4.99.3.1.12 integer read-write
Defines what the actor does if the network connection fails or after reboot until communication is established. Enumeration: 'keepCurrent': 0, 'off': 1, 'dimmed': 3, 'on': 2.
                   deviceConfigIdentify 1.3.6.1.4.1.3181.10.6.4.99.3.1.13 displaystring read-write
The actor will blink with its status led to signal its presence and physical location.
                   deviceConfigRestart 1.3.6.1.4.1.3181.10.6.4.99.3.1.14 displaystring read-write
Restart the actor.
                   deviceConfigCalibrate 1.3.6.1.4.1.3181.10.6.4.99.3.1.15 displaystring read-write
Start calibration process (if available for this actor type).
                   deviceConfigPair 1.3.6.1.4.1.3181.10.6.4.99.3.1.16 displaystring read-write
Start pairing process that couples individual device to this director.
                   deviceConfigUnpair 1.3.6.1.4.1.3181.10.6.4.99.3.1.17 displaystring read-write
Discard exisiting pairing between an individual device and this director.
                   deviceConfigUpdateFirmware 1.3.6.1.4.1.3181.10.6.4.99.3.1.18 displaystring read-write
Update the device firmware. When no file name is supplied, the latest version is automatically selected. Alternatively, a specific file name can be supplied to use another version. Use Management.files.firmware.display_files to view a list of available files under the SLC section. (applies to SmartLight Controllers)
           actorGroupConfigTable 1.3.6.1.4.1.3181.10.6.4.99.4 no-access
Defines a group of actors that support the same attribute and which shall be set toghter to the same value.
               actorGroupConfigEntry 1.3.6.1.4.1.3181.10.6.4.99.4.1 no-access
                   actorGroupConfigIndex 1.3.6.1.4.1.3181.10.6.4.99.4.1.1 integer no-access
Automatically generated
                   actorGroupConfigGroupName 1.3.6.1.4.1.3181.10.6.4.99.4.1.2 displaystring read-write
Unique group name referenced by the director
                   actorGroupConfigAttribute 1.3.6.1.4.1.3181.10.6.4.99.4.1.3 displaystring read-write
The attribute which is configured. Locally, identical attributes of the associated devices listed below are grouped.
                   actorGroupConfigAssociatedDevices 1.3.6.1.4.1.3181.10.6.4.99.4.1.4 displaystring read-write
List of all actors that supply information to a particular group. When an instance is used, here the syntax devicename.instance is used. All records are comma separated.
                   actorGroupConfigAdditionalParameter 1.3.6.1.4.1.3181.10.6.4.99.4.1.5 displaystring read-write
Comma separated list of any parameter specific for this attribute if needed.
                   actorGroupConfigDefaultValue 1.3.6.1.4.1.3181.10.6.4.99.4.1.6 displaystring read-write
                   actorGroupConfigValueCaching 1.3.6.1.4.1.3181.10.6.4.99.4.1.7 integer read-write
When enabled the group target value is saved to local non volaive memory. Should the director restart, the cached values will be restored and send to the devices. This feature is useful to ensure uninterrupted operation even in the event of a system failure or to restore conditions after a power outage. Enumeration: 'disabled': 0, 'enabled': 1.
                   actorGroupConfigAdditionalScriptName 1.3.6.1.4.1.3181.10.6.4.99.4.1.8 displaystring read-write
When the actor group is updated, an additional script, defined here, can be executed to run time consuming functions outside of the standard processing loop. Usually, this field is left empty.
                   actorGroupConfigManualSetValue 1.3.6.1.4.1.3181.10.6.4.99.4.1.9 displaystring read-write
This command permits setting of the group value manually bypassing the defined script logic. This is intended for testing only. Important: This manual setting always acts on priority level 8.
           sensorGroupConfigTable 1.3.6.1.4.1.3181.10.6.4.99.5 no-access
Defines a group of sensors that support the same attribute and whose data should be interpreted together.
               sensorGroupConfigEntry 1.3.6.1.4.1.3181.10.6.4.99.5.1 no-access
                   sensorGroupConfigIndex 1.3.6.1.4.1.3181.10.6.4.99.5.1.1 integer no-access
Automatically generated
                   sensorGroupConfigGroupName 1.3.6.1.4.1.3181.10.6.4.99.5.1.2 displaystring read-write
Unique group name referenced by the director
                   sensorGroupConfigAttribute 1.3.6.1.4.1.3181.10.6.4.99.5.1.3 displaystring read-write
The attribute which is configured. Locally, identical attributes of the associated devices listed below are grouped.
                   sensorGroupConfigAssociatedDevices 1.3.6.1.4.1.3181.10.6.4.99.5.1.4 displaystring read-write
List of all sensors that supply information to a particular group. When an instance is used, here the syntax devicename.instance is used. All records are comma separated.
                   sensorGroupConfigValueCaching 1.3.6.1.4.1.3181.10.6.4.99.5.1.5 integer read-write
When enabled the group target value is saved to local non volaive memory. Should the director restart, the cached values will be restored and send to the devices. This feature is useful to ensure uninterrupted operation even in the event of a system failure or to restore conditions after a power outage. Enumeration: 'disabled': 0, 'enabled': 1.
                   sensorGroupConfigRunScriptWhen 1.3.6.1.4.1.3181.10.6.4.99.5.1.6 integer read-write
Defines which sensor group status needs to change in order to run the standard (and optional additional_script). This can be used to limit the number of script runs by not following little changes that lead to no effect. This filter is logically behind the sensor specific limits defined elsewhere is this table. When the sensor filter is setup well, then this filter here can be relaxed. Enumeration: 'anyChange': 1, 'avgAbsolute': 3, 'totalPercent': 6, 'avgPercent': 4, 'newPeakLevel': 7, 'totalAbsolute': 5, 'disabled': 0, 'zeroCrossing': 9, 'anyUpdate': 8, 'limitCrossed': 2.
                   sensorGroupConfigRunScriptDelta 1.3.6.1.4.1.3181.10.6.4.99.5.1.7 displaystring read-write
Defines how much the value can deviate before a value change is reported automatically. Depending on the setting of the report_mode an absolute or a percent value is expected.
                   sensorGroupConfigScriptName 1.3.6.1.4.1.3181.10.6.4.99.5.1.8 displaystring read-write
When the group is updated and the required conditions are met, the script specified in this parameter is executed. If the parameter is left blank, the standard MS_SmartOfficeControl.ms script is executed. The specified script should not contain any time consuming functions. Syntax: = appname/filename:subroutine The appname and subroutine name are optional. Without appname, the script must be located in xml_cli_scripts folder.
                   sensorGroupConfigAdditionalScriptName 1.3.6.1.4.1.3181.10.6.4.99.5.1.9 displaystring read-write
When the group is updated and the required conditions are met and a script is defined here, this script is executed in the background after the standard processing for this group has taken place. An additional script, defined here, can be used to run time consuming functions outside of the standard processing loop. Usually, this field is left empty.
                   sensorGroupConfigReportMode 1.3.6.1.4.1.3181.10.6.4.99.5.1.10 integer read-write
Defines if the sensor is passive or actively reports changes and error conditions Enumeration: 'deltaAbsolute': 3, 'passive': 1, 'disabled': 0, 'test': 5, 'deltaPercent': 2, 'onThreshold': 4.
                   sensorGroupConfigAdditionalParameter 1.3.6.1.4.1.3181.10.6.4.99.5.1.11 displaystring read-write
Comma separated list of any parameter specific for this attribute if needed.
                   sensorGroupConfigLowerBoundary 1.3.6.1.4.1.3181.10.6.4.99.5.1.12 displaystring read-write
When the measured value of any sensor is equal or below this value an event is raised. The value may be configured directly with a numerical value optionally followed by a unit.
                   sensorGroupConfigUpperBoundary 1.3.6.1.4.1.3181.10.6.4.99.5.1.13 displaystring read-write
When the measured value of any sensor is equal or above this value an event is raised. The value may be configured directly with a numerical value optionally followed by a unit.
                   sensorGroupConfigBoundaryHysteresis 1.3.6.1.4.1.3181.10.6.4.99.5.1.14 integer read-write
How much the value must return within bounds before the alarm condition is cleared. Enumeration: 'high': 2, 'none': 0, 'low': 1.
                   sensorGroupConfigUpdateDelta 1.3.6.1.4.1.3181.10.6.4.99.5.1.15 displaystring read-write
Defines how much the value can deviate before a value change is reported automatically. Depending on the setting of the report_mode an absolute or a percent value is expected.
                   sensorGroupConfigRateLimit 1.3.6.1.4.1.3181.10.6.4.99.5.1.16 unsigned32 read-write
Defines how quickly the value is reported. Defined In units of 100ms. 0 means no rate limiting.
                   sensorGroupConfigClearValues 1.3.6.1.4.1.3181.10.6.4.99.5.1.17 displaystring read-write
Clear status values for minimum_peak_hold and maximum_peak_hold.
           deviceInformationTable 1.3.6.1.4.1.3181.10.6.4.99.100 no-access
Summarizes the most important inventory information of each detected device.
                   deviceInformationEntry 1.3.6.1.4.1.3181.10.6.4.99.100.1 no-access
                       deviceInformationIndex 1.3.6.1.4.1.3181.10.6.4.99.100.1.1 integer no-access
Automatically generated
                       deviceInformationName 1.3.6.1.4.1.3181.10.6.4.99.100.1.2 displaystring read-only
Unique name for reference. This is name of the base device.
                       deviceInformationHardwareId 1.3.6.1.4.1.3181.10.6.4.99.100.1.3 displaystring read-only
A product specific hardware identification. May for example contain the MAC address.
                       deviceInformationDeviceType 1.3.6.1.4.1.3181.10.6.4.99.100.1.4 integer read-only
Indicates if this is an actor or sensor device. Enumeration: 'actor': 2, 'unused': 0, 'other': 5, 'sensor': 1, 'gateway': 4, 'actorSensor': 3.
                       deviceInformationOperationalState 1.3.6.1.4.1.3181.10.6.4.99.100.1.5 integer read-only
Indicates the operational state of the device. Device (not attribute) specific errors will be indicated here. Enumeration: 'unregistered': 9, 'normal': 2, 'unknown': 0, 'pairing': 7, 'inConfig': 8, 'notReady': 6, 'failed': 1, 'configError': 4, 'testMode': 3, 'unpaired': 5.
                       deviceInformationActorAttributes 1.3.6.1.4.1.3181.10.6.4.99.100.1.6 displaystring read-only
Lists which setable actor attributes are provided by this device.
                       deviceInformationSensorAttributes 1.3.6.1.4.1.3181.10.6.4.99.100.1.7 displaystring read-only
Lists which readable sensor attributes are provided by this device.
                       deviceInformationVendorName 1.3.6.1.4.1.3181.10.6.4.99.100.1.8 displaystring read-only
Vendor or manufacturer name of the device.
                       deviceInformationArticleNumber 1.3.6.1.4.1.3181.10.6.4.99.100.1.9 displaystring read-only
This device article number.
                       deviceInformationSerialNumber 1.3.6.1.4.1.3181.10.6.4.99.100.1.10 displaystring read-only
This device serial number.
                       deviceInformationHardwareRevision 1.3.6.1.4.1.3181.10.6.4.99.100.1.11 displaystring read-only
This device hardware version.
                       deviceInformationSoftwareVersion 1.3.6.1.4.1.3181.10.6.4.99.100.1.12 displaystring read-only
This device software / firmware version.
                       deviceInformationAdditionalInfo 1.3.6.1.4.1.3181.10.6.4.99.100.1.13 displaystring read-only
Optional comma separated list of status fields specific for this type of device.
           actorListTable 1.3.6.1.4.1.3181.10.6.4.99.101 no-access
This table lists all currenly registered actors with all their attributes.
                   actorListEntry 1.3.6.1.4.1.3181.10.6.4.99.101.1 no-access
                       actorListIndex 1.3.6.1.4.1.3181.10.6.4.99.101.1.1 integer no-access
Automatically generated
                       actorListDevice 1.3.6.1.4.1.3181.10.6.4.99.101.1.2 displaystring read-only
This is name of the base device which controls this actor. There may be several actor types (attributes) in the same device and these share the same name but use different attributes. There may also be several similar actor attribues. These are differentiated with the instance parameter.
                       actorListInstance 1.3.6.1.4.1.3181.10.6.4.99.101.1.3 displaystring read-only
Describes a unique instance when several similar functional attributes are existing in the same device
                       actorListAttribute 1.3.6.1.4.1.3181.10.6.4.99.101.1.4 displaystring read-only
The kind of function this actor is acting on
                       actorListAssociatedGroups 1.3.6.1.4.1.3181.10.6.4.99.101.1.5 displaystring read-only
Indicates in which actor_groups this actor takes part.
                       actorListValue 1.3.6.1.4.1.3181.10.6.4.99.101.1.6 displaystring read-only
The currently set value as text string followed by the unit such as mA or Lux.
                       actorListActorState 1.3.6.1.4.1.3181.10.6.4.99.101.1.7 integer read-only
Indicates wether the indicated value was successfully written to the actual device. Enumeration: 'requested': 2, 'confirmed': 4, 'ok': 1, 'manually': 8, 'unknown': 0, 'failed': 6, 'retrying': 3, 'denied': 5, 'restored': 7.
                       actorListLastUpdate 1.3.6.1.4.1.3181.10.6.4.99.101.1.8 counter32 read-only
Indicates the time when this record was last updated.
           sensorListTable 1.3.6.1.4.1.3181.10.6.4.99.102 no-access
This table lists all currenly registered sensors with all their attributes.
                   sensorListEntry 1.3.6.1.4.1.3181.10.6.4.99.102.1 no-access
                       sensorListIndex 1.3.6.1.4.1.3181.10.6.4.99.102.1.1 integer no-access
Automatically generated
                       sensorListDevice 1.3.6.1.4.1.3181.10.6.4.99.102.1.2 displaystring read-only
This is name of the base device which controls this sensor. There may be several different sensor types (attributes) in the same device. These share the same name but use different attributes. There may also be several similar sensors in the device. These are differentiated with the instance parameter.
                       sensorListInstance 1.3.6.1.4.1.3181.10.6.4.99.102.1.3 displaystring read-only
Describes a unique instance when several similar functional attributes are existing in the same device
                       sensorListAttribute 1.3.6.1.4.1.3181.10.6.4.99.102.1.4 displaystring read-only
The kind of measurement this sensor is reporting.
                       sensorListAssociatedGroups 1.3.6.1.4.1.3181.10.6.4.99.102.1.5 displaystring read-only
Indicates in which sensor_groups this sensor takes part.
                       sensorListValue 1.3.6.1.4.1.3181.10.6.4.99.102.1.6 displaystring read-only
The last reported value as text string followed by the unit such as mA or Lux.
                       sensorListSensorState 1.3.6.1.4.1.3181.10.6.4.99.102.1.7 integer read-only
Indicates particular sensor states such hitting a boundary. Enumeration: 'ok': 1, 'deviceFailed': 6, 'lowerLimit': 3, 'manually': 8, 'unknown': 0, 'commFailed': 5, 'lowBatt': 2, 'upperLimit': 4.
                       sensorListLastUpdate 1.3.6.1.4.1.3181.10.6.4.99.102.1.8 counter32 read-only
Indicates the time when this record was last updated.
           actorGroupStatusTable 1.3.6.1.4.1.3181.10.6.4.99.103 no-access
Calculated status of the defined actor groups. The listed value reflects the value all associated actors should use. The values update when an actor group is set by a script or manually.
                   actorGroupStatusEntry 1.3.6.1.4.1.3181.10.6.4.99.103.1 no-access
                       actorGroupStatusIndex 1.3.6.1.4.1.3181.10.6.4.99.103.1.1 integer no-access
Automatically generated
                       actorGroupStatusGroupName 1.3.6.1.4.1.3181.10.6.4.99.103.1.2 displaystring read-only
This is name mirrors the actor_group_configuration.
                       actorGroupStatusAttribute 1.3.6.1.4.1.3181.10.6.4.99.103.1.3 displaystring read-only
The name of the controlled attribute.
                       actorGroupStatusNumAssignedActors 1.3.6.1.4.1.3181.10.6.4.99.103.1.4 integer32 read-only
Number of actors that are configured for this group.
                       actorGroupStatusNumFailedActors 1.3.6.1.4.1.3181.10.6.4.99.103.1.5 integer32 read-only
Number of actors that have not responded as expected.
                       actorGroupStatusGroupState 1.3.6.1.4.1.3181.10.6.4.99.103.1.6 integer read-only
Enumeration: 'unknown': 0, 'manually': 8, 'ok': 1, 'updating': 2, 'unreliable': 3.
                       actorGroupStatusValue 1.3.6.1.4.1.3181.10.6.4.99.103.1.7 displaystring read-only
This value is set by the decision logic. May contain simple on,OFF or for example a sound file name
                       actorGroupStatusActivePriority 1.3.6.1.4.1.3181.10.6.4.99.103.1.8 unsigned32 read-only
Indicates which priority level is currently controlling the group value. Lower values have higher priority.
                       actorGroupStatusPriorityValueChain 1.3.6.1.4.1.3181.10.6.4.99.103.1.9 displaystring read-only
Displays the prority=value pairs of all currently defined priority levels. Relinquished priorites are not shown.
                       actorGroupStatusCacheStatus 1.3.6.1.4.1.3181.10.6.4.99.103.1.10 integer read-only
Indicates if this group_status is saved even upon system power loss or reboot. Enumeration: 'disabled': 1, 'unknown': 0, 'saved': 3, 'pending': 2, 'failed': 4.
                       actorGroupStatusLastUpdate 1.3.6.1.4.1.3181.10.6.4.99.103.1.11 counter32 read-only
Indicates the time when this group status was last updated.
           sensorGroupStatusTable 1.3.6.1.4.1.3181.10.6.4.99.104 no-access
Calculated status for all sensor groups. The sensor values of all contributing sensors are used to calculate min, max and average values. The values update each time a sensor reports changes.
                   sensorGroupStatusEntry 1.3.6.1.4.1.3181.10.6.4.99.104.1 no-access
                       sensorGroupStatusIndex 1.3.6.1.4.1.3181.10.6.4.99.104.1.1 integer no-access
Automatically generated
                       sensorGroupStatusGroupName 1.3.6.1.4.1.3181.10.6.4.99.104.1.2 displaystring read-only
This is name mirrors the sensor_group_configuration.
                       sensorGroupStatusAttribute 1.3.6.1.4.1.3181.10.6.4.99.104.1.3 displaystring read-only
The name of the attribute measured. E.g. brightness, motion, switch.
                       sensorGroupStatusNumAssignedSensors 1.3.6.1.4.1.3181.10.6.4.99.104.1.4 integer32 read-only
Number of sensors that are configured for this group.
                       sensorGroupStatusNumFailedSensors 1.3.6.1.4.1.3181.10.6.4.99.104.1.5 integer32 read-only
Number of sensors that have not responded as expected.
                       sensorGroupStatusGroupState 1.3.6.1.4.1.3181.10.6.4.99.104.1.6 integer read-only
Informs when not all sensors operate as expected. Enumeration: 'unknown': 0, 'manually': 8, 'ok': 1, 'updating': 2, 'unreliable': 3.
                       sensorGroupStatusMinimumPeakHold 1.3.6.1.4.1.3181.10.6.4.99.104.1.7 displaystring read-only
Minimum value ever reported in this group since last value clear.
                       sensorGroupStatusMinimumValue 1.3.6.1.4.1.3181.10.6.4.99.104.1.8 displaystring read-only
Minimum value out of all sensors that report to this group.
                       sensorGroupStatusAverageValue 1.3.6.1.4.1.3181.10.6.4.99.104.1.9 displaystring read-only
Average value out of all sensors that report to this group. Uses the number of reporting sensors to calculate the average.
                       sensorGroupStatusMaximumValue 1.3.6.1.4.1.3181.10.6.4.99.104.1.10 displaystring read-only
Maximum value out of all sensors that report to this group.
                       sensorGroupStatusMaximumPeakHold 1.3.6.1.4.1.3181.10.6.4.99.104.1.11 displaystring read-only
Maximum value ever reported in this group since last value clear.
                       sensorGroupStatusTotalValue 1.3.6.1.4.1.3181.10.6.4.99.104.1.12 displaystring read-only
The total sum of all individual sensor values in this group.
                       sensorGroupStatusLowerBoundaryReached 1.3.6.1.4.1.3181.10.6.4.99.104.1.13 integer32 read-only
Number of sensors that have reached their lower threshold. A value of 0 means no sensor has reached a lower boundary.
                       sensorGroupStatusUpperBoundaryReached 1.3.6.1.4.1.3181.10.6.4.99.104.1.14 integer32 read-only
Number of sensors that have reached their upper threshold. A value of 0 means no sensor has reached an upper boundary.
                       sensorGroupStatusUpdatingSensorIndex 1.3.6.1.4.1.3181.10.6.4.99.104.1.15 integer32 read-only
Indicates the index to the sensor_list which has caused the latest group update.
                       sensorGroupStatusCacheStatus 1.3.6.1.4.1.3181.10.6.4.99.104.1.16 integer read-only
Indicates if this attribute is saved even upon system power loss or reboot. Enumeration: 'disabled': 1, 'unknown': 0, 'saved': 3, 'pending': 2, 'failed': 4.
                       sensorGroupStatusLastUpdate 1.3.6.1.4.1.3181.10.6.4.99.104.1.17 counter32 read-only
Indicates the time when this group status was last updated.