G6-LLDP-MIB: View SNMP OID List / Download MIB

VENDOR: MICROSENS


 Home MIB: G6-LLDP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, MICROSENS-G6-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 protocol 1.3.6.1.4.1.3181.10.6.2
Microsens private MIB for Generation 6 Ethernet Switches
     lldp 1.3.6.1.4.1.3181.10.6.2.43
           configTable 1.3.6.1.4.1.3181.10.6.2.43.1 no-access
General settings for LLDP (link layer discovery protocol). This protocol is used to identify the directly attached neighbor devices. This is useful to build a network topolgy. It is also used to identify voip telephones and to set them up.
               configEntry 1.3.6.1.4.1.3181.10.6.2.43.1.1 no-access
                   configIndex 1.3.6.1.4.1.3181.10.6.2.43.1.1.1 integer no-access
Automatically generated
                   configEnableLldp 1.3.6.1.4.1.3181.10.6.2.43.1.1.2 integer read-write
This generally enables the link layer discovery protocol (LLDP). Enumeration: 'disabled': 0, 'enabled': 1.
                   configEnableCdp 1.3.6.1.4.1.3181.10.6.2.43.1.1.3 integer read-write
This enables Cisco discovery protocol. Check cdp_version parameter to select CDP version. Enumeration: 'disabled': 0, 'enabled': 1.
                   configLldpEnabledPorts 1.3.6.1.4.1.3181.10.6.2.43.1.1.4 integer read-write
This parameter permits port selective LLDP enabling. When empty all ports are enabled! Syntax: slot/port, slot/port or use hex value for quick setup. Example = 0x7 defines ports 1-3.
                   configReceiveOnly 1.3.6.1.4.1.3181.10.6.2.43.1.1.5 integer read-write
This enables receive only mode. LLDP will not send any frames. It will only listen to its neighbours. Enumeration: 'disabled': 0, 'enabled': 1.
                   configForwardToLink 1.3.6.1.4.1.3181.10.6.2.43.1.1.6 integer read-write
This mode forwards all received LLDP packets to the uplink port. In combination with receive_only option enabled this unit keeps quiet and all LLDP handling should be taken care off by the upstream device. Enumeration: 'disabled': 0, 'enabled': 1.
                   configAdvertizedMedClass 1.3.6.1.4.1.3181.10.6.2.43.1.1.7 integer read-write
Enables emission of LLDP-MED frames of a certain class. Enumeration: 'mediaEndpoint': 2, 'genericEndpoint': 1, 'disableMed': 0, 'communicationEndpoint': 3, 'networkDevice': 4.
                   configDisableMedInventory 1.3.6.1.4.1.3181.10.6.2.43.1.1.8 integer read-write
Disable LLDP-MED inventory TLV transmission. Enumeration: 'disabled': 0, 'enabled': 1.
                   configDisableVoiceVlanTlv 1.3.6.1.4.1.3181.10.6.2.43.1.1.9 integer read-write
Disable voice vlan indication TLV transmission. Enumeration: 'disabled': 0, 'enabled': 1.
                   configCdpVersion 1.3.6.1.4.1.3181.10.6.2.43.1.1.10 integer read-write
Determines which version CDP messages are used. Enumeration: 'v1AndV2': 0, 'v2': 2, 'v1': 1.
                   configVoiceVlanPrio 1.3.6.1.4.1.3181.10.6.2.43.1.1.11 integer32 read-write
Layer 2 priority used for voice vlan in voip application.
                   configVoiceVlanSignalPrio 1.3.6.1.4.1.3181.10.6.2.43.1.1.12 integer32 read-write
Layer 2 priority used for voice vlan signaling in voip application.
                   configVoiceDscp 1.3.6.1.4.1.3181.10.6.2.43.1.1.13 integer32 read-write
DiffServ codepoint (0-63) for voip application
                   configSignalingDscp 1.3.6.1.4.1.3181.10.6.2.43.1.1.14 integer32 read-write
DiffServ codepoint (0-63) for voip signaling
                   configTimeToLive 1.3.6.1.4.1.3181.10.6.2.43.1.1.15 integer32 read-write
The time to live value defines the time for which the lldp transmitted details are valid and can be displayed in the status.
                   configTxDelay 1.3.6.1.4.1.3181.10.6.2.43.1.1.16 integer32 read-write
Transmission delay in seconds between successive LLDP frame transmissions initiated by changes in the LLDP local configuration.
                   configMsgTxInterval 1.3.6.1.4.1.3181.10.6.2.43.1.1.17 integer32 read-write
The interval at which LLDP frames are transmitted on behalf of this LLDP agent.
                   configForceLldpTransmission 1.3.6.1.4.1.3181.10.6.2.43.1.1.18 integer read-write
Force to send LLDP packets even when there is no LLDP peer detected. Enumeration: 'disabled': 0, 'enabled': 1.
                   configLldpResponsePreferred 1.3.6.1.4.1.3181.10.6.2.43.1.1.19 integer read-write
When enabled LLDP responses takes precende over CDP protocol responses. Enumeration: 'disabled': 0, 'enabled': 1.
           localCoordinatesTable 1.3.6.1.4.1.3181.10.6.2.43.2 no-access
Detailed GPS information about the pysical location of this device may be entered here.
               localCoordinatesEntry 1.3.6.1.4.1.3181.10.6.2.43.2.1 no-access
                   localCoordinatesIndex 1.3.6.1.4.1.3181.10.6.2.43.2.1.1 integer no-access
Automatically generated
                   localCoordinatesLatitude 1.3.6.1.4.1.3181.10.6.2.43.2.1.2 displaystring read-write
A value in degrees such as: 50,123
                   localCoordinatesLatResolution 1.3.6.1.4.1.3181.10.6.2.43.2.1.3 integer32 read-write
A value in bits. Higher value is more accurate.
                   localCoordinatesLongitude 1.3.6.1.4.1.3181.10.6.2.43.2.1.4 displaystring read-write
A value in degrees such as: 50,123
                   localCoordinatesLongResolution 1.3.6.1.4.1.3181.10.6.2.43.2.1.5 integer32 read-write
A value in bits. Higher value is more accurate.
                   localCoordinatesAltitude 1.3.6.1.4.1.3181.10.6.2.43.2.1.6 displaystring read-write
A value in meters.
                   localCoordinatesAltResolution 1.3.6.1.4.1.3181.10.6.2.43.2.1.7 integer32 read-write
A value in bits. Higher value is more accurate.
                   localCoordinatesAltType 1.3.6.1.4.1.3181.10.6.2.43.2.1.8 integer read-write
Defines in which way the altitude is interpreted. Enumeration: 'meter': 0, 'floor': 1.
                   localCoordinatesDatum 1.3.6.1.4.1.3181.10.6.2.43.2.1.9 displaystring read-write
Name of the map the given coordinates are based upon.
           localCivicLocationTable 1.3.6.1.4.1.3181.10.6.2.43.3 no-access
Detailed address information about the physical location of this device may be entered here. These data are forwarded using the LLDP-MED protocol.
               localCivicLocationEntry 1.3.6.1.4.1.3181.10.6.2.43.3.1 no-access
                   localCivicLocationIndex 1.3.6.1.4.1.3181.10.6.2.43.3.1.1 integer no-access
Automatically generated
                   localCivicLocationCountryCode 1.3.6.1.4.1.3181.10.6.2.43.3.1.2 displaystring read-write
Two-letter ISO 3166 country code in capital ASCII letters. Use DE for Germany, etc.
                   localCivicLocationLanguage 1.3.6.1.4.1.3181.10.6.2.43.3.1.3 displaystring read-write
ISO 639 language code used for presenting the address information.
                   localCivicLocationNationalSubdivision 1.3.6.1.4.1.3181.10.6.2.43.3.1.4 displaystring read-write
National subdivision: state, canton, region, province, or prefecture. Example: Hessen
                   localCivicLocationCounty 1.3.6.1.4.1.3181.10.6.2.43.3.1.5 displaystring read-write
County / parish / district. Example: Landkreis Darmstadt
                   localCivicLocationTown 1.3.6.1.4.1.3181.10.6.2.43.3.1.6 displaystring read-write
City / township. Example: Frankfurt
                   localCivicLocationDistrict 1.3.6.1.4.1.3181.10.6.2.43.3.1.7 displaystring read-write
City district / division / borough / ward.
                   localCivicLocationBlock 1.3.6.1.4.1.3181.10.6.2.43.3.1.8 displaystring read-write
Neighborhood / block.
                   localCivicLocationStreet 1.3.6.1.4.1.3181.10.6.2.43.3.1.9 displaystring read-write
Name of the street without house number.
                   localCivicLocationLeadingStreetDirection 1.3.6.1.4.1.3181.10.6.2.43.3.1.10 displaystring read-write
Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
                   localCivicLocationTrailingStreetSuffix 1.3.6.1.4.1.3181.10.6.2.43.3.1.11 displaystring read-write
Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
                   localCivicLocationStreetSuffix 1.3.6.1.4.1.3181.10.6.2.43.3.1.12 displaystring read-write
Street suffix such as place or avenue.
                   localCivicLocationHouseNumber 1.3.6.1.4.1.3181.10.6.2.43.3.1.13 displaystring read-write
House number without a possible suffix.
                   localCivicLocationHouseNumberSuffix 1.3.6.1.4.1.3181.10.6.2.43.3.1.14 displaystring read-write
A modifier to the house number. It does not include parts of the house number. Example: a
                   localCivicLocationLandmark 1.3.6.1.4.1.3181.10.6.2.43.3.1.15 displaystring read-write
Landmark or vanity address for easier reference. Example: Airport Frankfurt
                   localCivicLocationAdditionalInfo 1.3.6.1.4.1.3181.10.6.2.43.3.1.16 displaystring read-write
Additional location information without specified format.
                   localCivicLocationName 1.3.6.1.4.1.3181.10.6.2.43.3.1.17 displaystring read-write
Identifies the person or organization associated with the address. Example: Sunshine Airline Office
                   localCivicLocationZipCode 1.3.6.1.4.1.3181.10.6.2.43.3.1.18 displaystring read-write
Postal zip code for the address.
                   localCivicLocationBuilding 1.3.6.1.4.1.3181.10.6.2.43.3.1.19 displaystring read-write
The name of the building if this exists. Example: Terminal Building East
                   localCivicLocationUnit 1.3.6.1.4.1.3181.10.6.2.43.3.1.20 displaystring read-write
Unit / appartment / suite.
                   localCivicLocationFloor 1.3.6.1.4.1.3181.10.6.2.43.3.1.21 displaystring read-write
Floor value. Example: 1 for first floor
                   localCivicLocationRoom 1.3.6.1.4.1.3181.10.6.2.43.3.1.22 displaystring read-write
Room number or name.
                   localCivicLocationPlaceType 1.3.6.1.4.1.3181.10.6.2.43.3.1.23 displaystring read-write
Place type. Example: Office
                   localCivicLocationScript 1.3.6.1.4.1.3181.10.6.2.43.3.1.24 displaystring read-write
The script (from ISO 15924 [14]) used to encode the address information. Default: Latn
                   localCivicLocationElinNumber 1.3.6.1.4.1.3181.10.6.2.43.3.1.25 displaystring read-write
Emergency Call Services (ECS) Emergency Location Identification Number (ELIN).
           receivedOverviewTable 1.3.6.1.4.1.3181.10.6.2.43.100 no-access
                   receivedOverviewEntry 1.3.6.1.4.1.3181.10.6.2.43.100.1 no-access
                       receivedOverviewPortIndex 1.3.6.1.4.1.3181.10.6.2.43.100.1.1 integer no-access
Automatically generated
                       receivedOverviewSysName 1.3.6.1.4.1.3181.10.6.2.43.100.1.2 displaystring read-only
System name.
                       receivedOverviewSysDesc 1.3.6.1.4.1.3181.10.6.2.43.100.1.3 displaystring read-only
System description.
                       receivedOverviewChassisIdSubtype 1.3.6.1.4.1.3181.10.6.2.43.100.1.4 integer read-only
Type of chassis id. Enumeration: 'macAddress': 4, 'networkAddress': 5, 'interfaceName': 6, 'interfaceAlias': 2, 'unknown': 0, 'chassisComponent': 1, 'local': 7, 'portComponent': 3.
                       receivedOverviewChassisId 1.3.6.1.4.1.3181.10.6.2.43.100.1.5 displaystring read-only
Chassis id of received frame.
                       receivedOverviewMgmtIp 1.3.6.1.4.1.3181.10.6.2.43.100.1.6 displaystring read-only
Management IP address.
                       receivedOverviewMgmtOid 1.3.6.1.4.1.3181.10.6.2.43.100.1.7 displaystring read-only
Management start OID for SNMP access.
                       receivedOverviewCapabilities 1.3.6.1.4.1.3181.10.6.2.43.100.1.8 bits read-only
LLDP capabilities supported. Bits: 'bridge': 2, 'repeater': 1, 'station': 7, 'telephone': 5, 'other': 0, 'router': 4, 'wlan': 3, 'docsis': 6.
                       receivedOverviewCapabilitiesEnabled 1.3.6.1.4.1.3181.10.6.2.43.100.1.9 bits read-only
LLDP capabilities enabled. Bits: 'bridge': 2, 'repeater': 1, 'station': 7, 'telephone': 5, 'other': 0, 'router': 4, 'wlan': 3, 'docsis': 6.
                       receivedOverviewMedCapabilities 1.3.6.1.4.1.3181.10.6.2.43.100.1.10 bits read-only
LLDP_MED capabilities. Bits: 'mdiPse': 3, 'capability': 0, 'mdiPd': 4, 'location': 2, 'policy': 1, 'inventory': 5.
                       receivedOverviewPortIdSubtype 1.3.6.1.4.1.3181.10.6.2.43.100.1.11 integer read-only
Type of port id. Enumeration: 'macAddress': 3, 'networkAddress': 4, 'interfaceName': 5, 'interfaceAlias': 1, 'unknown': 0, 'agentCircuitId': 6, 'local': 7, 'portComponent': 2.
                       receivedOverviewPortIdentification 1.3.6.1.4.1.3181.10.6.2.43.100.1.12 displaystring read-only
Port id.
                       receivedOverviewPortDescription 1.3.6.1.4.1.3181.10.6.2.43.100.1.13 displaystring read-only
Port description.
                       receivedOverviewPortVlan 1.3.6.1.4.1.3181.10.6.2.43.100.1.14 integer32 read-only
Port vlan identifier. Related to port_default_vlan_id.
           receivedCoordinatesTable 1.3.6.1.4.1.3181.10.6.2.43.101 no-access
Detailed GPS information about the pysical location of the attached device for each port are visible here if provided through the LLDP-MED protocol.
                   receivedCoordinatesEntry 1.3.6.1.4.1.3181.10.6.2.43.101.1 no-access
                       receivedCoordinatesPortIndex 1.3.6.1.4.1.3181.10.6.2.43.101.1.1 integer no-access
Automatically generated
                       receivedCoordinatesLatitude 1.3.6.1.4.1.3181.10.6.2.43.101.1.2 displaystring read-only
A value in degrees such as: 50,123
                       receivedCoordinatesLatResolution 1.3.6.1.4.1.3181.10.6.2.43.101.1.3 integer32 read-only
A value in bits. Higher value is more accurate.
                       receivedCoordinatesLongitude 1.3.6.1.4.1.3181.10.6.2.43.101.1.4 displaystring read-only
A value in degrees such as: 50,123
                       receivedCoordinatesLongResolution 1.3.6.1.4.1.3181.10.6.2.43.101.1.5 integer32 read-only
A value in bits. Higher value is more accurate.
                       receivedCoordinatesAltitude 1.3.6.1.4.1.3181.10.6.2.43.101.1.6 displaystring read-only
A value in meters or the floor level depending on definition.
                       receivedCoordinatesAltResolution 1.3.6.1.4.1.3181.10.6.2.43.101.1.7 integer32 read-only
A value in bits. Higher value is more accurate.
                       receivedCoordinatesAltUnit 1.3.6.1.4.1.3181.10.6.2.43.101.1.8 integer read-only
Defines in which way the altitude is interpreted. Enumeration: 'meter': 0, 'floor': 1.
                       receivedCoordinatesDatum 1.3.6.1.4.1.3181.10.6.2.43.101.1.9 displaystring read-only
Name of the map the given coordinates are based upon.
           receivedCivicLocationsTable 1.3.6.1.4.1.3181.10.6.2.43.102 no-access
Detailed address information about the physical location of the attached device for each port are visible here if provided through the LLDP-MED protocol.
                   receivedCivicLocationsEntry 1.3.6.1.4.1.3181.10.6.2.43.102.1 no-access
                       receivedCivicLocationsPortIndex 1.3.6.1.4.1.3181.10.6.2.43.102.1.1 integer no-access
Automatically generated
                       receivedCivicLocationsCountryCode 1.3.6.1.4.1.3181.10.6.2.43.102.1.2 displaystring read-only
Two-letter ISO 3166 country code in capital ASCII letters. Use DE for Germany, etc.
                       receivedCivicLocationsLanguage 1.3.6.1.4.1.3181.10.6.2.43.102.1.3 displaystring read-only
ISO 639 language code used for presenting the address information.
                       receivedCivicLocationsNationalSubdivision 1.3.6.1.4.1.3181.10.6.2.43.102.1.4 displaystring read-only
National subdivision: state, canton, region, province, or prefecture. Example: Hessen.
                       receivedCivicLocationsCounty 1.3.6.1.4.1.3181.10.6.2.43.102.1.5 displaystring read-only
County / parish / district. Example: Landkreis Darmstadt
                       receivedCivicLocationsTown 1.3.6.1.4.1.3181.10.6.2.43.102.1.6 displaystring read-only
City / township. Example: Frankfurt
                       receivedCivicLocationsDistrict 1.3.6.1.4.1.3181.10.6.2.43.102.1.7 displaystring read-only
City district / division / borough / ward.
                       receivedCivicLocationsBlock 1.3.6.1.4.1.3181.10.6.2.43.102.1.8 displaystring read-only
Neighborhood / block.
                       receivedCivicLocationsStreet 1.3.6.1.4.1.3181.10.6.2.43.102.1.9 displaystring read-only
Name of the street without house number.
                       receivedCivicLocationsLeadingStreetDirection 1.3.6.1.4.1.3181.10.6.2.43.102.1.10 displaystring read-only
Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
                       receivedCivicLocationsTrailingStreetSuffix 1.3.6.1.4.1.3181.10.6.2.43.102.1.11 displaystring read-only
Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
                       receivedCivicLocationsStreetSuffix 1.3.6.1.4.1.3181.10.6.2.43.102.1.12 displaystring read-only
Street suffix such as place or avenue.
                       receivedCivicLocationsHouseNumber 1.3.6.1.4.1.3181.10.6.2.43.102.1.13 displaystring read-only
House number without a possible suffix.
                       receivedCivicLocationsHouseNumberSuffix 1.3.6.1.4.1.3181.10.6.2.43.102.1.14 displaystring read-only
A modifier to the house number. It does not include parts of the house number. Example: a
                       receivedCivicLocationsLandmark 1.3.6.1.4.1.3181.10.6.2.43.102.1.15 displaystring read-only
Landmark or vanity address for easier reference. Example: Airport Frankfurt
                       receivedCivicLocationsAdditionalInfo 1.3.6.1.4.1.3181.10.6.2.43.102.1.16 displaystring read-only
Additional location information without specified format.
                       receivedCivicLocationsName 1.3.6.1.4.1.3181.10.6.2.43.102.1.17 displaystring read-only
Identifies the person or organization associated with the address. Example: Sunshine Airline Office
                       receivedCivicLocationsZipCode 1.3.6.1.4.1.3181.10.6.2.43.102.1.18 displaystring read-only
Postal zip code for the address.
                       receivedCivicLocationsBuilding 1.3.6.1.4.1.3181.10.6.2.43.102.1.19 displaystring read-only
The name of the building if this exists. Example: Terminal Building East
                       receivedCivicLocationsUnit 1.3.6.1.4.1.3181.10.6.2.43.102.1.20 displaystring read-only
Unit / appartment / suite.
                       receivedCivicLocationsFloor 1.3.6.1.4.1.3181.10.6.2.43.102.1.21 displaystring read-only
Floor value. Example: 1 for first floor.
                       receivedCivicLocationsRoom 1.3.6.1.4.1.3181.10.6.2.43.102.1.22 displaystring read-only
Room number or name.
                       receivedCivicLocationsPlaceType 1.3.6.1.4.1.3181.10.6.2.43.102.1.23 displaystring read-only
Place type. Example: Office.
                       receivedCivicLocationsScript 1.3.6.1.4.1.3181.10.6.2.43.102.1.24 displaystring read-only
The script (from ISO 15924 [14]) used to encode the address information. Default: Latn
                       receivedCivicLocationsElinNumber 1.3.6.1.4.1.3181.10.6.2.43.102.1.25 displaystring read-only
Emergency Call Services (ECS) Emergency Location Identification Number (ELIN).
           receivedPoliciesTable 1.3.6.1.4.1.3181.10.6.2.43.103 no-access
Detailed information about the attached applications.
                   receivedPoliciesEntry 1.3.6.1.4.1.3181.10.6.2.43.103.1 no-access
                       receivedPoliciesPortIndex 1.3.6.1.4.1.3181.10.6.2.43.103.1.1 integer no-access
Automatically generated
                       receivedPoliciesApplicationType 1.3.6.1.4.1.3181.10.6.2.43.103.1.2 integer read-only
Valid application types. Enumeration: 'guestVoiceSignaling': 4, 'videoConferencing': 6, 'softphoneVoice': 5, 'unknown': 0, 'guestVoice': 3, 'streamingVideo': 7, 'videoSignaling': 8, 'voice': 1, 'voiceSignaling': 2.
                       receivedPoliciesPolicyDefined 1.3.6.1.4.1.3181.10.6.2.43.103.1.3 integer read-only
False indicates policy is unknown. True indicates policy is defined. Enumeration: 'true': 1, 'false': 0.
                       receivedPoliciesTaggedVlan 1.3.6.1.4.1.3181.10.6.2.43.103.1.4 integer read-only
When set VLAN tagging is used. Enumeration: 'true': 1, 'false': 0.
                       receivedPoliciesVlanId 1.3.6.1.4.1.3181.10.6.2.43.103.1.5 unsigned32 read-only
0 - only the priority level is significant. / IEEE 802.1q VLAN ID (VID) value. Related to voice vlan.
                       receivedPoliciesLayer2Priority 1.3.6.1.4.1.3181.10.6.2.43.103.1.6 integer read-only
IEEE 802.1d / IEEE 802.1p Layer 2 Priority. Enumeration: 'networkControl': 8, 'controlledLoad': 5, 'unknown': 0, 'bestEffort': 3, 'spare': 2, 'background': 1, 'video': 6, 'voice': 7, 'excellentEffort': 4.
                       receivedPoliciesDscp 1.3.6.1.4.1.3181.10.6.2.43.103.1.7 integer32 read-only
DiffServ/Differentiated Services Code Point (DSCP) value as defined in IETF RFC 2474 for the specified application type.
           receivedInventoryInfosTable 1.3.6.1.4.1.3181.10.6.2.43.104 no-access
This table lists general inventory data of the attached equipment.
                   receivedInventoryInfosEntry 1.3.6.1.4.1.3181.10.6.2.43.104.1 no-access
                       receivedInventoryInfosPortIndex 1.3.6.1.4.1.3181.10.6.2.43.104.1.1 integer no-access
Automatically generated
                       receivedInventoryInfosHardwareRevision 1.3.6.1.4.1.3181.10.6.2.43.104.1.2 displaystring read-only
Hardware version
                       receivedInventoryInfosFirmwareRevision 1.3.6.1.4.1.3181.10.6.2.43.104.1.3 displaystring read-only
Firmware version
                       receivedInventoryInfosSoftwareRevision 1.3.6.1.4.1.3181.10.6.2.43.104.1.4 displaystring read-only
Software version
                       receivedInventoryInfosSerialNumber 1.3.6.1.4.1.3181.10.6.2.43.104.1.5 displaystring read-only
Serial number
                       receivedInventoryInfosManufacturer 1.3.6.1.4.1.3181.10.6.2.43.104.1.6 displaystring read-only
Manufacturer name
                       receivedInventoryInfosModelName 1.3.6.1.4.1.3181.10.6.2.43.104.1.7 displaystring read-only
Vendor-specific model name
                       receivedInventoryInfosAssetId 1.3.6.1.4.1.3181.10.6.2.43.104.1.8 displaystring read-only
Vendor-specific asset tracking identifier
           receivedPoeInfosTable 1.3.6.1.4.1.3181.10.6.2.43.105 no-access
Detailed PoE information about the attached applications.
                   receivedPoeInfosEntry 1.3.6.1.4.1.3181.10.6.2.43.105.1 no-access
                       receivedPoeInfosPortIndex 1.3.6.1.4.1.3181.10.6.2.43.105.1.1 integer no-access
Automatically generated
                       receivedPoeInfosType 1.3.6.1.4.1.3181.10.6.2.43.105.1.2 integer read-only
Type of PoE equipment. Enumeration: 'unknown': 0, 'noPoe': 3, 'pd': 2, 'pse': 1.
                       receivedPoeInfosSource 1.3.6.1.4.1.3181.10.6.2.43.105.1.3 integer read-only
Describes the power source. Enumeration: 'unknown': 0, 'pdLocalBackup': 2, 'pdPseLocal': 3, 'pdPsePrimary': 1.
                       receivedPoeInfosPriority 1.3.6.1.4.1.3181.10.6.2.43.105.1.4 integer read-only
Indicates priority of this device. Enumeration: 'high': 2, 'unknown': 0, 'critical': 1, 'low': 3.
                       receivedPoeInfosValue 1.3.6.1.4.1.3181.10.6.2.43.105.1.5 unsigned32 read-only
Indicates the power available from the PSE via this port expressed in units of 0.1 watts on the remote device.
           receivedPoeControlTable 1.3.6.1.4.1.3181.10.6.2.43.106 no-access
                   receivedPoeControlEntry 1.3.6.1.4.1.3181.10.6.2.43.106.1 no-access
                       receivedPoeControlPortIndex 1.3.6.1.4.1.3181.10.6.2.43.106.1.1 integer no-access
Automatically generated
                       receivedPoeControlType 1.3.6.1.4.1.3181.10.6.2.43.106.1.2 integer read-only
Indicates device type. Enumeration: 'unknown': 0, 'noPoe': 3, 'pd': 2, 'pse': 1.
                       receivedPoeControlPoePowerSupported 1.3.6.1.4.1.3181.10.6.2.43.106.1.3 integer read-only
Indicates if PoE is supported by the interface. Enumeration: 'true': 1, 'false': 0.
                       receivedPoeControlPoePowerEnabled 1.3.6.1.4.1.3181.10.6.2.43.106.1.4 integer read-only
Indicates if PoE is enabled for this interface. Enumeration: 'true': 1, 'false': 0.
                       receivedPoeControlPairControl 1.3.6.1.4.1.3181.10.6.2.43.106.1.5 integer read-only
Indicates if the pair selection can be controlled on the given port Enumeration: 'true': 1, 'false': 0.
                       receivedPoeControlPowerPairs 1.3.6.1.4.1.3181.10.6.2.43.106.1.6 integer read-only
Indicates which pins of the plug are used for power. Enumeration: 'signal': 1, 'spare': 2.
                       receivedPoeControlPowerClass 1.3.6.1.4.1.3181.10.6.2.43.106.1.7 integer read-only
Required PoE class. Enumeration: 'noClass': 0, 'class4': 5, 'class2': 3, 'class3': 4, 'class0': 1, 'class1': 2.
                       receivedPoeControlDeviceType 1.3.6.1.4.1.3181.10.6.2.43.106.1.8 integer32 read-only
Type of PoE equipment.
                       receivedPoeControlSource 1.3.6.1.4.1.3181.10.6.2.43.106.1.9 integer read-only
Indicates the power source. Enumeration: 'unknown': 0, 'pdLocalBackup': 2, 'pdPseLocal': 3, 'pdPsePrimary': 1.
                       receivedPoeControlPriority 1.3.6.1.4.1.3181.10.6.2.43.106.1.10 integer read-only
Priority of the attached port. Enumeration: 'high': 2, 'unknown': 0, 'critical': 1, 'low': 3.
                       receivedPoeControlPdRequestedPower 1.3.6.1.4.1.3181.10.6.2.43.106.1.11 integer32 read-only
PD requested power value
                       receivedPoeControlPseAllocatedPower 1.3.6.1.4.1.3181.10.6.2.43.106.1.12 integer32 read-only
PSE allocated power value