G6-HARDWARE-MIB: View SNMP OID List / Download MIB

VENDOR: MICROSENS


 Home MIB: G6-HARDWARE-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 device 1.3.6.1.4.1.3181.10.6.1
Microsens private MIB for Generation 6 Ethernet Switches
     hardware 1.3.6.1.4.1.3181.10.6.1.31
           hardwareLedTest 1.3.6.1.4.1.3181.10.6.1.31.1 displaystring read-write
Runs a leds test whereby all LED light up in all possible colors for checking their function. The tests terminates within a few seconds.
           hardwareLedMode 1.3.6.1.4.1.3181.10.6.1.31.2 integer read-write
The LED display can be configured to be less intrusive. Enumeration: 'dark': 3, 'static': 1, 'dynamic': 0, 'quiet': 2, 'lightshow': 4.
           hardwarePowerSupply1Monitored 1.3.6.1.4.1.3181.10.6.1.31.3 integer read-write
When disabled a missing power supply 1 will not turn the associated led red on failure. Do this when single power supply 2 operation is used or when the device is powered soley by PoE. This feature only applies to industrial switches. Enumeration: 'disabled': 0, 'enabled': 1.
           hardwarePowerSupply2Monitored 1.3.6.1.4.1.3181.10.6.1.31.4 integer read-write
When disabled a missing power supply 2 will not turn the associated led red on failure. Do this when single power supply 1 operation is used or when the device is powered soley by PoE. This feature only applies to industrial switches. Enumeration: 'disabled': 0, 'enabled': 1.
           hardwareFactoryResetButton 1.3.6.1.4.1.3181.10.6.1.31.5 integer read-write
When disabled the factory button will trigger the factory reset function when pressed for a long time. The IP discover function upon a short button click is not affected. Enumeration: 'disabled': 0, 'enabled': 1.
           cableTestConfigTable 1.3.6.1.4.1.3181.10.6.1.31.6 no-access
The cable tester allows for detection of copper cable faults and can even detect where the fault is located.
               cableTestConfigEntry 1.3.6.1.4.1.3181.10.6.1.31.6.1 no-access
                   cableTestConfigPortIndex 1.3.6.1.4.1.3181.10.6.1.31.6.1.1 integer no-access
Automatically generated
                   cableTestConfigEnableAutoCableTest 1.3.6.1.4.1.3181.10.6.1.31.6.1.2 integer read-write
When enabled a cable test is performed each time the link goes down. The test is only performed for copper ports or dual media ports in copper mode. Enumeration: 'disabled': 0, 'enabled': 1.
                   cableTestConfigEventGeneration 1.3.6.1.4.1.3181.10.6.1.31.6.1.3 integer read-write
When the cable termination status changes an event can be raised. Enumeration: 'disabled': 0, 'cableUnplugged': 2, 'anyChange': 1.
                   cableTestConfigStartTestNow 1.3.6.1.4.1.3181.10.6.1.31.6.1.4 displaystring read-write
May be used to manually start a cable test. ATTENTION: If the port is in link up status it will be forced to link down first. This will disrupt the current data traffic. Therefore, type start_test_now = CONFIRM.
           ioSignalConfigTable 1.3.6.1.4.1.3181.10.6.1.31.7 no-access
               ioSignalConfigEntry 1.3.6.1.4.1.3181.10.6.1.31.7.1 no-access
                   ioSignalConfigIndex 1.3.6.1.4.1.3181.10.6.1.31.7.1.1 integer no-access
Automatically generated
                   ioSignalConfigSignalMode 1.3.6.1.4.1.3181.10.6.1.31.7.1.2 integer read-write
Permit setting of io signal LEDs and relays to static or blink blink mode for increased visualization. Enumeration: 'ledBlink': 1, 'static': 0, 'relayBlink': 2.
                   ioSignalConfigInput1Mode 1.3.6.1.4.1.3181.10.6.1.31.7.1.3 integer read-write
When this function is activated the external alarm input 1 is monitored. Note: alarm inputs are not available in all product versions. Enumeration: 'disabled': 0, 'alarmWhenLow': 2, 'alarmWhenHigh': 1.
                   ioSignalConfigInput1Name 1.3.6.1.4.1.3181.10.6.1.31.7.1.4 displaystring read-write
A customer specific name can be specified for input 1. This name will appear in the associated event messages.
                   ioSignalConfigInput2Mode 1.3.6.1.4.1.3181.10.6.1.31.7.1.5 integer read-write
When this function is activated the external alarm input 2 is monitored. Note: alarm inputs are not available in all product versions. Enumeration: 'disabled': 0, 'alarmWhenLow': 2, 'alarmWhenHigh': 1.
                   ioSignalConfigInput2Name 1.3.6.1.4.1.3181.10.6.1.31.7.1.6 displaystring read-write
A customer specific name can be specified for input 2. This name will appear in the associated event messages.
                   ioSignalConfigOutput1Trigger 1.3.6.1.4.1.3181.10.6.1.31.7.1.7 integer read-write
Defines on which condition the alarm relay 1 is activated. Note: alarm relays are not available in all product versions. Enumeration: 'on': 5, 'redundancyFail': 2, 'off': 4, 'disabled': 0, 'highTemp': 3, 'whileRunning': 1.
                   ioSignalConfigOutput1Name 1.3.6.1.4.1.3181.10.6.1.31.7.1.8 displaystring read-write
A customer specific name can be specified for alarm output 1. This name will appear in the associated event messages.
                   ioSignalConfigOutput2Trigger 1.3.6.1.4.1.3181.10.6.1.31.7.1.9 integer read-write
Defines on which condition the alarm relay 2 is activated. Note: alarm relays are not available in all product versions. Enumeration: 'on': 5, 'redundancyFail': 2, 'off': 4, 'disabled': 0, 'highTemp': 3, 'whileRunning': 1.
                   ioSignalConfigOutput2Name 1.3.6.1.4.1.3181.10.6.1.31.7.1.10 displaystring read-write
A customer specific name can be specified for alarm output 2. This name will appear in the associated event messages.
           hardwarePowerSupply1Status 1.3.6.1.4.1.3181.10.6.1.31.100 integer read-only
Displays state of primary supply or only supply for single supply systems. Enumeration: 'ok': 0, 'inputLow': 2, 'notInstalled': 6, 'overload': 1, 'notApplicable': 4, 'fuseFail': 3, 'unmanaged': 5.
           hardwarePowerSupply2Status 1.3.6.1.4.1.3181.10.6.1.31.101 integer read-only
Displays state of secondary supply if available. Enumeration: 'ok': 0, 'inputLow': 2, 'notInstalled': 6, 'overload': 1, 'notApplicable': 4, 'fuseFail': 3, 'unmanaged': 5.
           hardwareRunningOnPoe 1.3.6.1.4.1.3181.10.6.1.31.102 integer read-only
When set the unit currently operates on the PD input via PoE. Enumeration: 'true': 1, 'false': 0.
           hardwareFanStatus 1.3.6.1.4.1.3181.10.6.1.31.103 integer read-only
Displays state of cooling fan. Indicates UNUSED in fanless devices. Enumeration: 'unused': 0, 'fail': 3, 'degraded': 2, 'ok': 1, 'missing': 4.
           hardwareSdCardStatus 1.3.6.1.4.1.3181.10.6.1.31.104 integer read-only
Current status of SD-card. Enumeration: 'writeProtected': 2, 'inserted': 1, 'empty': 0, 'writing': 3.
           hardwareNumOfPorts 1.3.6.1.4.1.3181.10.6.1.31.105 integer32 read-only
Total number of Ethernet ports this hardware offers.
           hardwareMaskOfExistingPorts 1.3.6.1.4.1.3181.10.6.1.31.106 integer read-only
Set bit for each port that physically exisiting and could be in use.
           hardwareMaskOfSfpPorts 1.3.6.1.4.1.3181.10.6.1.31.107 integer read-only
Marks which ports support SFPs.
           hardwareMaskOfPoePorts 1.3.6.1.4.1.3181.10.6.1.31.108 integer read-only
Marks which ports support PoE output.
           moduleInfoTable 1.3.6.1.4.1.3181.10.6.1.31.109 no-access
This section indicates which modules are inserted in the optional extension slots.
                   moduleInfoEntry 1.3.6.1.4.1.3181.10.6.1.31.109.1 no-access
                       moduleInfoIndex 1.3.6.1.4.1.3181.10.6.1.31.109.1.1 integer no-access
Automatically generated
                       moduleInfoUnitType 1.3.6.1.4.1.3181.10.6.1.31.109.1.2 integer read-only
Identfies the general type of module. Enumeration: 'notPresent': 0, 'baseUnit': 1, 'extension': 2.
                       moduleInfoArticleNumber 1.3.6.1.4.1.3181.10.6.1.31.109.1.3 displaystring read-only
The article number of the module in this slot.
                       moduleInfoSerialNumber 1.3.6.1.4.1.3181.10.6.1.31.109.1.4 displaystring read-only
The serial number of the module in this slot.
                       moduleInfoHardwareVersion 1.3.6.1.4.1.3181.10.6.1.31.109.1.5 displaystring read-only
This device hardware revision number.
                       moduleInfoProjectNumber 1.3.6.1.4.1.3181.10.6.1.31.109.1.6 displaystring read-only
MICROSENS project number.
                       moduleInfoOccupiedSlots 1.3.6.1.4.1.3181.10.6.1.31.109.1.7 displaystring read-only
Lists all slots contained in this module.
                       moduleInfoDescription 1.3.6.1.4.1.3181.10.6.1.31.109.1.8 displaystring read-only
Feature summary of the module.
           slotInfoTable 1.3.6.1.4.1.3181.10.6.1.31.110 no-access
This section indicates which modules are inserted in the optional extension slots.
                   slotInfoEntry 1.3.6.1.4.1.3181.10.6.1.31.110.1 no-access
                       slotInfoIndex 1.3.6.1.4.1.3181.10.6.1.31.110.1.1 integer no-access
Automatically generated
                       slotInfoBoardType 1.3.6.1.4.1.3181.10.6.1.31.110.1.2 integer read-only
General type of board function Enumeration: 'undefined': 1, 'power': 2, 'cp': 3, 'io': 5, 'notPresent': 0, 'port': 4.
                       slotInfoBoardId 1.3.6.1.4.1.3181.10.6.1.31.110.1.3 unsigned32 read-only
This identifies the board type for internal operation.
                       slotInfoVersionBits 1.3.6.1.4.1.3181.10.6.1.31.110.1.4 integer32 read-only
Version bits from hardware or backplane.
           portInfoTable 1.3.6.1.4.1.3181.10.6.1.31.111 no-access
Used to map physical to logical port ids.
                   portInfoEntry 1.3.6.1.4.1.3181.10.6.1.31.111.1 no-access
                       portInfoPortIndex 1.3.6.1.4.1.3181.10.6.1.31.111.1.1 integer no-access
Automatically generated
                       portInfoSystemSlot 1.3.6.1.4.1.3181.10.6.1.31.111.1.2 integer32 read-only
Describes on which system slot this port index is located.
                       portInfoSwitchPort 1.3.6.1.4.1.3181.10.6.1.31.111.1.3 integer32 read-only
Describes on which switch port this port index is located.
                       portInfoUserSlot 1.3.6.1.4.1.3181.10.6.1.31.111.1.4 integer32 read-only
Slot number as seen by customer.
                       portInfoUserPort 1.3.6.1.4.1.3181.10.6.1.31.111.1.5 integer32 read-only
Port number as seen by customer.
                       portInfoSnmpPort 1.3.6.1.4.1.3181.10.6.1.31.111.1.6 integer32 read-only
Slot and port representation as used in SNMP. Formula is Slot*100 + Port.
                       portInfoSnmpInstance 1.3.6.1.4.1.3181.10.6.1.31.111.1.7 integer32 read-only
Port instance counting from 0 to number of ports
                       portInfoHardwarePort 1.3.6.1.4.1.3181.10.6.1.31.111.1.8 integer32 read-only
Port number as used internally. Ports may not be in sequential order.
                       portInfoInterfaceType 1.3.6.1.4.1.3181.10.6.1.31.111.1.9 integer read-only
Identifies port as copper or optical. Also used for snmp ifType definition Enumeration: 'copper': 0, 'dualMedia': 2, 'optical': 1.
                       portInfoProperties 1.3.6.1.4.1.3181.10.6.1.31.111.1.10 bits read-only
Describes which functions the port can support. Bits: 'ms1x9': 6, 'linkPort': 11, 'ms1000Mb': 3, 'dualMedia': 10, 'csfp': 12, 'sfp': 5, 'rj45': 4, 'ms100Mb': 2, 'pd': 9, 'poe': 7, 'ms10Mb': 1, 'internal': 0, 'poePlus': 8.
           portLedsTable 1.3.6.1.4.1.3181.10.6.1.31.112 no-access
This section indicates the state of all port related LEDs.
                   portLedsEntry 1.3.6.1.4.1.3181.10.6.1.31.112.1 no-access
                       portLedsPortIndex 1.3.6.1.4.1.3181.10.6.1.31.112.1.1 integer no-access
Automatically generated
                       portLedsEthernetColor 1.3.6.1.4.1.3181.10.6.1.31.112.1.2 integer read-only
Ethernet Link LED. Enumeration: 'blue': 1, 'off': 0, 'noLed': 8, 'green': 2, 'orange': 4, 'cyan': 5, 'magenta': 6, 'white': 7, 'red': 3.
                       portLedsEthernetBlinking 1.3.6.1.4.1.3181.10.6.1.31.112.1.3 integer read-only
Ethernet Link LED. Enumeration: 'true': 1, 'false': 0.
                       portLedsPoeColor 1.3.6.1.4.1.3181.10.6.1.31.112.1.4 integer read-only
Power over Ethernet LED. For optical ports this indicates signal detect status. Enumeration: 'blue': 1, 'off': 0, 'noLed': 8, 'green': 2, 'orange': 4, 'cyan': 5, 'magenta': 6, 'white': 7, 'red': 3.
                       portLedsPoeBlinking 1.3.6.1.4.1.3181.10.6.1.31.112.1.5 integer read-only
Power over Ethernet LED. For optical ports this indicates signal detect status. Enumeration: 'true': 1, 'false': 0.
           deviceLedsTable 1.3.6.1.4.1.3181.10.6.1.31.113 no-access
This section indicates the state of all LEDs which are not port related. Please note: Not every unit offers all LEDs.
                   deviceLedsEntry 1.3.6.1.4.1.3181.10.6.1.31.113.1 no-access
                       deviceLedsIndex 1.3.6.1.4.1.3181.10.6.1.31.113.1.1 integer no-access
Automatically generated
                       deviceLedsSystem1Color 1.3.6.1.4.1.3181.10.6.1.31.113.1.2 integer read-only
This status corresponds to 'sys' LED on some devices. Enumeration: 'blue': 1, 'off': 0, 'noLed': 8, 'green': 2, 'orange': 4, 'cyan': 5, 'magenta': 6, 'white': 7, 'red': 3.
                       deviceLedsSystem1Blinking 1.3.6.1.4.1.3181.10.6.1.31.113.1.3 integer read-only
This status corresponds to 'sys' LED on some devices. Enumeration: 'true': 1, 'false': 0.
                       deviceLedsSystem2Color 1.3.6.1.4.1.3181.10.6.1.31.113.1.4 integer read-only
Displays external management activity. Enumeration: 'blue': 1, 'off': 0, 'noLed': 8, 'green': 2, 'orange': 4, 'cyan': 5, 'magenta': 6, 'white': 7, 'red': 3.
                       deviceLedsSystem2Blinking 1.3.6.1.4.1.3181.10.6.1.31.113.1.5 integer read-only
Displays external management activity. Enumeration: 'true': 1, 'false': 0.
                       deviceLedsPowerOn1Color 1.3.6.1.4.1.3181.10.6.1.31.113.1.6 integer read-only
This status corresponds to 'on' LED on some devices. Enumeration: 'blue': 1, 'off': 0, 'noLed': 8, 'green': 2, 'orange': 4, 'cyan': 5, 'magenta': 6, 'white': 7, 'red': 3.
                       deviceLedsPowerOn1Blinking 1.3.6.1.4.1.3181.10.6.1.31.113.1.7 integer read-only
This status corresponds to 'on' LED on some devices. Enumeration: 'true': 1, 'false': 0.
                       deviceLedsPowerOn2Color 1.3.6.1.4.1.3181.10.6.1.31.113.1.8 integer read-only
Alternative power input LED. Enumeration: 'blue': 1, 'off': 0, 'noLed': 8, 'green': 2, 'orange': 4, 'cyan': 5, 'magenta': 6, 'white': 7, 'red': 3.
                       deviceLedsPowerOn2Blinking 1.3.6.1.4.1.3181.10.6.1.31.113.1.9 integer read-only
Alternative power input LED. Enumeration: 'true': 1, 'false': 0.
                       deviceLedsRing1Color 1.3.6.1.4.1.3181.10.6.1.31.113.1.10 integer read-only
This LED is used when ring protection is enabled. Enumeration: 'blue': 1, 'off': 0, 'noLed': 8, 'green': 2, 'orange': 4, 'cyan': 5, 'magenta': 6, 'white': 7, 'red': 3.
                       deviceLedsRing1Blinking 1.3.6.1.4.1.3181.10.6.1.31.113.1.11 integer read-only
This LED is used when ring protection is enabled. Enumeration: 'true': 1, 'false': 0.
                       deviceLedsRing2Color 1.3.6.1.4.1.3181.10.6.1.31.113.1.12 integer read-only
This LED is used when ring protection is enabled. Enumeration: 'blue': 1, 'off': 0, 'noLed': 8, 'green': 2, 'orange': 4, 'cyan': 5, 'magenta': 6, 'white': 7, 'red': 3.
                       deviceLedsRing2Blinking 1.3.6.1.4.1.3181.10.6.1.31.113.1.13 integer read-only
This LED is used when ring protection is enabled. Enumeration: 'true': 1, 'false': 0.
                       deviceLedsSignalIn1Color 1.3.6.1.4.1.3181.10.6.1.31.113.1.14 integer read-only
Indicates status of alarm input 1. Enumeration: 'blue': 1, 'off': 0, 'noLed': 8, 'green': 2, 'orange': 4, 'cyan': 5, 'magenta': 6, 'white': 7, 'red': 3.
                       deviceLedsSignalIn1Blinking 1.3.6.1.4.1.3181.10.6.1.31.113.1.15 integer read-only
Indicates status of alarm input 1. Enumeration: 'true': 1, 'false': 0.
                       deviceLedsSignalIn2Color 1.3.6.1.4.1.3181.10.6.1.31.113.1.16 integer read-only
Indicates status of alarm input 2. Enumeration: 'blue': 1, 'off': 0, 'noLed': 8, 'green': 2, 'orange': 4, 'cyan': 5, 'magenta': 6, 'white': 7, 'red': 3.
                       deviceLedsSignalIn2Blinking 1.3.6.1.4.1.3181.10.6.1.31.113.1.17 integer read-only
Indicates status of alarm input 2. Enumeration: 'true': 1, 'false': 0.
                       deviceLedsSignalOut1Color 1.3.6.1.4.1.3181.10.6.1.31.113.1.18 integer read-only
Indicates status of alarm relay output 1. Enumeration: 'blue': 1, 'off': 0, 'noLed': 8, 'green': 2, 'orange': 4, 'cyan': 5, 'magenta': 6, 'white': 7, 'red': 3.
                       deviceLedsSignalOut1Blinking 1.3.6.1.4.1.3181.10.6.1.31.113.1.19 integer read-only
Indicates status of alarm relay output 1. Enumeration: 'true': 1, 'false': 0.
                       deviceLedsSignalOut2Color 1.3.6.1.4.1.3181.10.6.1.31.113.1.20 integer read-only
Indicates status of alarm relay output 2. Enumeration: 'blue': 1, 'off': 0, 'noLed': 8, 'green': 2, 'orange': 4, 'cyan': 5, 'magenta': 6, 'white': 7, 'red': 3.
                       deviceLedsSignalOut2Blinking 1.3.6.1.4.1.3181.10.6.1.31.113.1.21 integer read-only
Indicates status of alarm relay output 2. Enumeration: 'true': 1, 'false': 0.
           cableTestStatusTable 1.3.6.1.4.1.3181.10.6.1.31.114 no-access
This table display the result of the last cable test. Values are only available for copper ports while a link is down and if the cable test function is enabled.
                   cableTestStatusEntry 1.3.6.1.4.1.3181.10.6.1.31.114.1 no-access
                       cableTestStatusPortIndex 1.3.6.1.4.1.3181.10.6.1.31.114.1.1 integer no-access
Automatically generated
                       cableTestStatusUpdateTimeStamp 1.3.6.1.4.1.3181.10.6.1.31.114.1.2 displaystring read-only
Indicates the time when this record was last updated.
                       cableTestStatusPair0State 1.3.6.1.4.1.3181.10.6.1.31.114.1.3 integer read-only
Indicates line termination test results for wire pair 0 (Pins 1/2) Enumeration: 'notAvailable': 0, 'pairOpen': 2, 'crossPairShort': 4, 'pairOk': 1, 'samePairShort': 3.
                       cableTestStatusPair0DistanceToFault 1.3.6.1.4.1.3181.10.6.1.31.114.1.4 integer32 read-only
Distance to fault on wire pair 0 in centimeters. Indicates 0 when no fault is detected or the function is unused.
                       cableTestStatusPair1State 1.3.6.1.4.1.3181.10.6.1.31.114.1.5 integer read-only
Indicates line termination test results for wire pair 1 (Pins 3/6) Enumeration: 'notAvailable': 0, 'pairOpen': 2, 'crossPairShort': 4, 'pairOk': 1, 'samePairShort': 3.
                       cableTestStatusPair1DistanceToFault 1.3.6.1.4.1.3181.10.6.1.31.114.1.6 integer32 read-only
Distance to fault on wire pair 1 in centimeters. Indicates 0 when no fault is detected or the function is unused.
                       cableTestStatusPair2State 1.3.6.1.4.1.3181.10.6.1.31.114.1.7 integer read-only
Indicates line termination test results for wire pair 2 (Pins 4/5) Enumeration: 'notAvailable': 0, 'pairOpen': 2, 'crossPairShort': 4, 'pairOk': 1, 'samePairShort': 3.
                       cableTestStatusPair2DistanceToFault 1.3.6.1.4.1.3181.10.6.1.31.114.1.8 integer32 read-only
Distance to fault on wire pair 2 in centimeters. Indicates 0 when no fault is detected or the function is unused.
                       cableTestStatusPair3State 1.3.6.1.4.1.3181.10.6.1.31.114.1.9 integer read-only
Indicates line termination test results for wire pair 3 (Pins 7/8) Enumeration: 'notAvailable': 0, 'pairOpen': 2, 'crossPairShort': 4, 'pairOk': 1, 'samePairShort': 3.
                       cableTestStatusPair3DistanceToFault 1.3.6.1.4.1.3181.10.6.1.31.114.1.10 integer32 read-only
Distance to fault on wire pair 3 in centimeters. Indicates 0 when no fault is detected or the function is unused.
                       cableTestStatusCableStatus 1.3.6.1.4.1.3181.10.6.1.31.114.1.11 integer read-only
Enumeration: 'notAvailable': 0, 'open': 2, 'pluggedIn': 1.
           ioSignalStatusTable 1.3.6.1.4.1.3181.10.6.1.31.115 no-access
This section is only used for devices which offer external signal inputs and outputs.
                   ioSignalStatusEntry 1.3.6.1.4.1.3181.10.6.1.31.115.1 no-access
                       ioSignalStatusIndex 1.3.6.1.4.1.3181.10.6.1.31.115.1.1 integer no-access
Automatically generated
                       ioSignalStatusInput1AlarmActive 1.3.6.1.4.1.3181.10.6.1.31.115.1.2 integer read-only
Indicates true when the input 1 is logically active. Enumeration: 'true': 1, 'false': 0.
                       ioSignalStatusInput2AlarmActive 1.3.6.1.4.1.3181.10.6.1.31.115.1.3 integer read-only
Indicates true when the input 2 is logically active. Enumeration: 'true': 1, 'false': 0.
                       ioSignalStatusOutput1RelayActive 1.3.6.1.4.1.3181.10.6.1.31.115.1.4 integer read-only
Indicates true when the output 1 relay is activated. Enumeration: 'true': 1, 'false': 0.
                       ioSignalStatusOutput2RelayActive 1.3.6.1.4.1.3181.10.6.1.31.115.1.5 integer read-only
Indicates true when the output 2 relay is activated. Enumeration: 'true': 1, 'false': 0.
           tcamStatusTable 1.3.6.1.4.1.3181.10.6.1.31.116 no-access
This section is only used for devices which offer external signal inputs and outputs.
                   tcamStatusEntry 1.3.6.1.4.1.3181.10.6.1.31.116.1 no-access
                       tcamStatusIndex 1.3.6.1.4.1.3181.10.6.1.31.116.1.1 integer no-access
Automatically generated
                       tcamStatusControlFile 1.3.6.1.4.1.3181.10.6.1.31.116.1.2 displaystring read-only
Reflects the name of the control file associated with this tcam entry.
                       tcamStatusDescription 1.3.6.1.4.1.3181.10.6.1.31.116.1.3 displaystring read-only
Descriptive text what explains what this tcam entry will do.