Fore-J2-MIB: View SNMP OID List / Download MIB

VENDOR: FORE SYSTEMS


 Home MIB: Fore-J2-MIB
Download as:   
Fore-Common-MIB, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 foreJ2 1.3.6.1.4.1.326.2.2.1.1.6
write something interesting here
     j2ConfGroup 1.3.6.1.4.1.326.2.2.1.1.6.1
         j2ConfTable 1.3.6.1.4.1.326.2.2.1.1.6.1.1 no-access
A table of J2 switch port configuration information.
             j2ConfEntry 1.3.6.1.4.1.326.2.2.1.1.6.1.1.1 no-access
A table entry containing J2 configuration information for each port.
                 j2ConfBoard 1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.1 integer32 read-only
The index of this port's switch board.
                 j2ConfModule 1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.2 integer32 read-only
The network module of this port.
                 j2ConfPort 1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.3 integer32 read-only
The number of this port.
                 j2LineLength 1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.4 integer read-write
This variable represents the length of the physical medium connected to the J2 interface: j2ShortLine (1) means the line is a short line with less than 4db of attenuation from the transmitting source. j2LongLine (2) means the line is a long line, with greater than 4db of attenuation from the transmitting source. Enumeration: 'j2LongLine': 2, 'j2ShortLine': 1.
                 j2LoopbackConfig 1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.5 integer read-write
This variable represents the loopback configuration of the J2 interface. j2NoLoop (1) means that the interface is not in a loopback state. j2LineLoop (2) means that receive signal is looped back for retransmission without passing through the port's reframing function. j2DiagLoop (3) means that the transmit data stream is looped back to the receiver. j2OtherLoop (4) means that the interface is in a loopback that is not defined here. Enumeration: 'j2DiagLoop': 3, 'j2NoLoop': 1, 'j2LineLoop': 2, 'j2OtherLoop': 4.
                 j2TxClockSource 1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.6 integer read-write
The source of the transmit clock. Enumeration: 'localTiming': 2, 'rxTiming': 1.
                 j2LineStatus 1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.7 integer read-only
This variable indicates the Line Status of the interface. The variable contains loopback state information and failure state information. It is a bit map represented as a sum. The j2NoAlarm should be set if and only if no other flag is set. The various bit positions are: 1 j2NoAlarm 2 j2RxLOF Receive Loss of Frame 4 j2RxLOC Receive Loss of Clock (Not used anymore) 8 j2RxAIS Receive Alarm Indication Signal 16 j2TxLOC Transmit Loss of Clock (Not used anymore) 32 j2RxRAIS Receive Remote Alarm Indication Signal 64 j2RxLOS Receive Loss of Signal 128 j2TxRAIS Transmit Yellow ( Remote Alarm Indication Signal) 256 j2Other any line status not defined here 32768 j2RxLCD Receiving LCD failure indication.
                 j2IdleUnassignedCells 1.3.6.1.4.1.326.2.2.1.1.6.1.1.1.8 integer read-write
This variable indicates the types of cells that should be sent in case there is no real data to send. According to the ATM Forum, Unassigned cells should be sent (octet 1-3 are 0's, octet 4 is 0000xxx0, where x is 'don't care'). According to the CCITT specifications, Idle cells should be sent (everything is '0' except for the CLP bit which is '1'). By default, unassigned cells are transmitted in case there is no data to send. Enumeration: 'idle': 2, 'unassigned': 1.
     j2StatsGroup 1.3.6.1.4.1.326.2.2.1.1.6.2
         j2ErrorTable 1.3.6.1.4.1.326.2.2.1.1.6.2.1 no-access
A table of J2 error counters.
             j2ErrorEntry 1.3.6.1.4.1.326.2.2.1.1.6.2.1.1 no-access
A table entry containing J2 error counters.
                 j2ErrorBoard 1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.1 integer32 read-only
The index of this port's switch board.
                 j2ErrorModule 1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.2 integer32 read-only
The network module of this port.
                 j2ErrorPort 1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.3 integer32 read-only
The number of this port.
                 j2B8ZSCodingErrors 1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.4 counter32 read-only
The number of B8ZS coding violation errors.
                 j2CRC5Errors 1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.5 counter32 read-only
The number of CRC-5 received errors.
                 j2FramingErrors 1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.6 counter32 read-only
The number of framing patterns received in error.
                 j2RxLossOfFrame 1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.7 counter32 read-only
The number of seconds during which the receiver was experiencing Loss Of Frame.
                 j2RxLossOfClock 1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.8 counter32 read-only
The number of seconds during which the receiver was not observing transitions on the received clock signal.
                 j2RxAIS 1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.9 counter32 read-only
The number of seconds during which the receiver detected an Alarm Indication Signal.
                 j2TxLossOfClock 1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.10 counter32 read-only
The number of seconds during which the transmitter was experiencing Loss Of Clock.
                 j2RxRemoteAIS 1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.11 counter32 read-only
The number of seconds during which the receiver observed the Alarm Indication Signal in the m-bits channel.
                 j2RxLossOfSignal 1.3.6.1.4.1.326.2.2.1.1.6.2.1.1.12 counter32 read-only
The number of seconds during which the transmitter was experien cing Loss Of Signal.
         j2AtmTable 1.3.6.1.4.1.326.2.2.1.1.6.2.2 no-access
A table of J2 ATM statistics information.
             j2AtmEntry 1.3.6.1.4.1.326.2.2.1.1.6.2.2.1 no-access
A table entry containing J2 ATM statistics information.
                 j2AtmBoard 1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.1 integer32 read-only
The index of this port's switch board.
                 j2AtmModule 1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.2 integer32 read-only
The network module of this port.
                 j2AtmPort 1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.3 integer32 read-only
The number of this port.
                 j2AtmHCSs 1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.4 counter32 read-only
Number of header check sequence (HCS) error events. The HCS is a CRC-8 calculation over the first 4 octets of the ATM cell header.
                 j2AtmRxCells 1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.5 counter32 read-only
Number of ATM cells that were received.
                 j2AtmTxCells 1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.6 counter32 read-only
Number of non-null ATM cells that were transmitted.
                 j2AtmLCDs 1.3.6.1.4.1.326.2.2.1.1.6.2.2.1.7 counter32 read-only
The number of seconds in which Loss of Cell Delineation (LCD) has occurred. An LCD defect is detected when an out of cell delination state has persisted for 4ms. An LCD defect is cleared when the sync state has been maintained for 4ms.