Fore-Apsgroup-MIB: View SNMP OID List / Download MIB

VENDOR: FORE SYSTEMS


 Home MIB: Fore-Apsgroup-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 apsSwitchOver 1.3.6.1.4.1.326.2.2.0.2017
This trap alerts that an aps switchover has occurred and the active port is identified by the tuple {hwPortBoard, hwPortModule, hwPortNumber}.
     foreAps 1.3.6.1.4.1.326.2.2.1.1.16
SONET APS
           apsPortGroup 1.3.6.1.4.1.326.2.2.1.1.16.1
               apsPortTable 1.3.6.1.4.1.326.2.2.1.1.16.1.1 no-access
A table of SONET APS port configuration information.
                   apsPortEntry 1.3.6.1.4.1.326.2.2.1.1.16.1.1.1 no-access
A table entry containing SONET APS configuration information for each APS port.
                       apsBoard 1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.1 integer32 read-only
The index of this port's switch board.
                       apsModule 1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.2 integer32 read-only
The network module of this port.
                       apsPort 1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.3 integer32 read-only
The number of this port.
                       apsAdminMode 1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.4 integer read-only
This variable indicates the APS configuration for this port. Unprotected indicates that APS is not configured for this port. Working indicates that this port is a working channel. Protection indicates that this port is a protection channel. Enumeration: 'unprotected': 3, 'protection': 2, 'working': 1.
                       apsOperMode 1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.5 integer read-only
This variable indicates if this port is an active or standby APS channel. If APS is not configured for this port, the mode is notApplicable. loopbackOn indicates that the port is configured in the loopback mode and is the port on which the loopback has been enabled(or is under test). loopbackOff indicates that the port is configured in the loopback mode and is the port which is in the disabled state (not under test). Enumeration: 'active': 1, 'standby': 2, 'loopbackOn': 4, 'loopbackOff': 5, 'notApplicable': 3.
                       apsPortGroupName 1.3.6.1.4.1.326.2.2.1.1.16.1.1.1.6 displaystring read-only
This object identifies the APS group this port is associated with.
           apsGroup 1.3.6.1.4.1.326.2.2.1.1.16.2
               apsGroupTable 1.3.6.1.4.1.326.2.2.1.1.16.2.1 no-access
A table of SONET APS port group configuration information.
                   apsGroupEntry 1.3.6.1.4.1.326.2.2.1.1.16.2.1.1 no-access
A table entry containing SONET APS configuration information for each APS group.
                       apsGroupName 1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.1 displaystring read-only
This object identifies the APS group. of all the ports associated with this group.
                       apsGroupStateCommand 1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.2 integer read-write
A user initiated APS command. Note this object is write-only and reading it will result in implementation-specific results. Enumeration: 'forceSwitchToWorking': 3, 'forceSwitchToProtection': 4, 'clear': 1, 'manualSwitchToWorking': 5, 'lockout': 2, 'manualSwitchToProtection': 6.
                       apsGroupLastCommand 1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.3 integer read-only
Last Aps Command issued by the user. Enumeration: 'forceSwitchToWorking': 3, 'forceSwitchToProtection': 4, 'noRequest': 9, 'clear': 1, 'manualSwitchToWorking': 5, 'suspendProtection': 8, 'suspendWorking': 7, 'lockout': 2, 'manualSwitchToProtection': 6.
                       apsWorkingLineState 1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.4 integer read-only
Line State of the Working Port of the APS Group. Enumeration: 'notAvailable': 4, 'none': 3, 'signalDegrade': 2, 'signalFailure': 1.
                       apsProtectionLineState 1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.5 integer read-only
Line State of the Protection Port of the APS Group. Enumeration: 'notAvailable': 4, 'none': 3, 'signalDegrade': 2, 'signalFailure': 1.
                       apsGroupMode 1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.6 integer read-only
This variable indicates the APS switching mode for this APS group. Enumeration: 'bi-directional': 2, 'uni-directional': 1.
                       apsRxK1K2 1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.7 integer read-only
Command specified in the received K1K2 bytes. Enumeration: 'none': 11, 'signalDegrade': 5, 'signalFailure': 4, 'noRequest': 10, 'forceSwitch': 2, 'waitToRestore': 7, 'lockout': 1, 'manualSwitch': 3, 'reverseRequest': 8, 'notAvailable': 12, 'doNotRevert': 9, 'exercise': 6.
                       apsRxChannel 1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.8 integer read-only
Channel specified in received K1K2 bytes. Enumeration: 'protection': 2, 'not-applicable': 3, 'working': 1.
                       apsTxK1K2 1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.9 integer read-only
Command specified in the transmitted K1K2 bytes. Enumeration: 'none': 11, 'signalDegrade': 5, 'signalFailure': 4, 'noRequest': 10, 'forceSwitch': 2, 'waitToRestore': 7, 'lockout': 1, 'manualSwitch': 3, 'reverseRequest': 8, 'notAvailable': 12, 'doNotRevert': 9, 'exercise': 6.
                       apsTxChannel 1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.10 integer read-only
Channel specified in transmitted K1K2 bytes. Enumeration: 'protection': 2, 'not-applicable': 3, 'working': 1.
                       apsRevertMode 1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.11 integer read-write
APS revertive mode configuration Enumeration: 'on': 1, 'off': 2.
                       apsRevertTimer 1.3.6.1.4.1.326.2.2.1.1.16.2.1.1.12 integer32 read-write
APS revertive timer value in minutes