FOUNDRY-SN-STACKING-MIB: View SNMP OID List / Download MIB

VENDOR: BROCADE


 Home MIB: FOUNDRY-SN-STACKING-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 snStacking 1.3.6.1.4.1.1991.1.1.3.31
Management Information for stacking system configuration and operational status. Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
       snStackingGlobalObjects 1.3.6.1.4.1.1991.1.1.3.31.1
           snStackingGlobalConfigState 1.3.6.1.4.1.1991.1.1.3.31.1.1 integer read-write
Configure stack state for stacking feature on the global level. none: neutral, receive packets only enable: stacking is enable, send and receive packets disable: stacking is disable, No send and receive packets Enumeration: 'disabled': 2, 'none': 0, 'enabled': 1.
           snStackingGlobalMacAddress 1.3.6.1.4.1.1991.1.1.3.31.1.2 macaddress read-write
Management MAC address of the stacking system. This is available to change management MAC address of stack for administrative purpose. It is strongly recommended that this command should be used with upmost caution to prevent duplicate MAC address and must reboot the system to take an effect. It is mutually exclusive from enabling the persistent MAC timer. Enter zero MAC address to remove the configured MAC address
           snStackingGlobalPersistentMacTimerState 1.3.6.1.4.1.1991.1.1.3.31.1.3 integer read-write
Configure persistent MAC timer state for stacking feature on the global level. enable: the persistent MAC timer is active and configured. The persistent MAC timer is set as the default timer (60 minutes) disable: deactivate the persistent MAC timer. It will stop the use of persistent MAC address and use new active stack unit's base MAC address Enumeration: 'disabled': 1, 'enabled': 0.
           snStackingGlobalPersistentMacTimer 1.3.6.1.4.1.1991.1.1.3.31.1.4 integer32 read-write
Persistent MAC timer in minutes for the stacking system Number of minutes to retain original active stack unit's base MAC address in event of active unit crash or removal. This timer is triggered when new active unit is elected. When timer expires, new active unit will change stacking MAC to its own base MAC address and advertise its own base MAC address to management VLAN to update the ARP table of peers. If you decide to use new active unit's MAC address, one must enter this timer again to reactivate the persistent MAC. 0 - keep it forever. 5 to 6000 - valid value range. 60 - default value.
           snStackingGlobalTopology 1.3.6.1.4.1.1991.1.1.3.31.1.5 integer read-only
The topology of the stacking system Enumeration: 'ring': 3, 'other': 1, 'chain': 2, 'standalone': 4.
           snStackingGlobalMode 1.3.6.1.4.1.1991.1.1.3.31.1.6 integer read-only
The stacking mode of the system. stackingMode: the system has been installed STK EEPROM, and it is in stacking mode. nonStackingMode:the system has not been installed STK EEPROM, and it is not in stacking mode. Enumeration: 'nonStackingMode': 2, 'stackingMode': 1.
           snStackingGlobalMixedMode 1.3.6.1.4.1.1991.1.1.3.31.1.7 integer read-only
The mixed stacking mode of the system. mixedStackingMode: the system is in mixed stacking mode (heterogeneous stacking). classicStackingMode: the system is not in mixed stacking mode (homogeneous stacking). Enumeration: 'mixedStackingMode': 1, 'classicStackingMode': 2.
       snStackingTableObjects 1.3.6.1.4.1.1991.1.1.3.31.2
           snStackingConfigUnitTable 1.3.6.1.4.1.1991.1.1.3.31.2.1 no-access
Stacking configuration unit table.
               snStackingConfigUnitEntry 1.3.6.1.4.1.1991.1.1.3.31.2.1.1 no-access
An entry in the stacking configuration table.
                   snStackingConfigUnitIndex 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.1 integer32 no-access
The stacking unit Id
                   snStackingConfigUnitPriority 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.2 integer32 read-write
The priority in Active/backup eclection.
                   snStackingConfigUnitConfigStackPort 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.3 interfaceindexorzero read-write
The IfIndex for the configured stacking port. If no stacking port is configured, it will be displayed zero and the first two 10G ports as the default stacking ports. Enter zero to remove the configured stacking port.
                   snStackingConfigUnitRowStatus 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.4 integer read-write
This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid Enumeration: 'other': 1, 'valid': 2, 'delete': 3.
                   snStackingConfigUnitType 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.5 displaystring read-only
A description of the configured/active system type for each unit.
                   snStackingConfigUnitState 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.6 integer read-only
A state for each unit Enumeration: 'remote': 2, 'reserved': 3, 'local': 1, 'empty': 4.
                   snStackingConfigUnitStackPort1 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.7 interfaceindexorzero read-only
First stack port for each unit. It returns 0 if stack port does not exist.
                   snStackingConfigUnitStackPort2 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.8 interfaceindexorzero read-only
Second stack port for each unit. It returns 0 if stack port does not exist.
                   snStackingConfigUnitConnectPort1 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.9 interfaceindexorzero read-write
First connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are suggested neighbor linking ports. Thus, they could be code units' periport/trunk or peripheral units' stacking port. It returns 0 if connect port does not exist.
                   snStackingConfigUnitConnectPort2 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.10 interfaceindexorzero read-write
second connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are suggested neighbor linking ports. Thus, they could be code units' periport/trunk or peripheral units' stacking port. It returns 0 if connect port does not exist.
           snStackingOperUnitTable 1.3.6.1.4.1.1991.1.1.3.31.2.2 no-access
Stacking operation unit table.
               snStackingOperUnitEntry 1.3.6.1.4.1.1991.1.1.3.31.2.2.1 no-access
An entry in the stacking operation table.
                   snStackingOperUnitIndex 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.1 integer32 no-access
The stacking unit Id
                   snStackingOperUnitRole 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.2 integer read-only
A role for each unit Enumeration: 'active': 2, 'standby': 3, 'other': 1, 'standalone': 5, 'member': 4.
                   snStackingOperUnitMac 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.3 macaddress read-only
A MAC address for each unit
                   snStackingOperUnitPriority 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.4 integer32 read-only
The priority in Active/backup eclection.
                   snStackingOperUnitState 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.5 integer read-only
A state for each unit Enumeration: 'remote': 2, 'reserved': 3, 'local': 1, 'empty': 4.
                   snStackingOperUnitDescription 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.6 displaystring read-only
Describes the stacking state for each unit.
                   snStackingOperUnitStackPort1 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.7 interfaceindexorzero read-only
First stack port for each unit. It returns 0 if stack port does not exist.
                   snStackingOperUnitStackPort1State 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.8 integer read-only
The first stack port state for each unit. Enumeration: 'down': 3, 'other': 1, 'up': 2.
                   snStackingOperUnitStackPort2 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.9 interfaceindexorzero read-only
Second stack port for each unit. It returns 0 if stack port does not exist.
                   snStackingOperUnitStackPort2State 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.10 integer read-only
The second stack port state for each unit. Enumeration: 'down': 3, 'other': 1, 'up': 2.
                   snStackingOperUnitNeighbor1 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.11 integer32 read-only
Stacking neighbor unit (left) number. If there is no neighbor unit, then it returns 0.
                   snStackingOperUnitNeighbor2 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.12 integer32 read-only
Stacking neighbor unit (left) number. If there is no neighbor unit, then it returns 0.
                   snStackingOperUnitImgVer 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.13 displaystring read-only
The version of the running software image
                   snStackingOperUnitBuildlVer 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.14 displaystring read-only
The version of the running software build
           snStackingConfigStackTrunkTable 1.3.6.1.4.1.1991.1.1.3.31.2.3 no-access
Stacking configuration stack trunk table.
               snStackingConfigStackTrunkEntry 1.3.6.1.4.1.1991.1.1.3.31.2.3.1 no-access
An entry in the stacking configuration Stack trunk table.
                   snStackingConfigStackTrunkUnit 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.1 integer32 no-access
The stacking unit Id
                   snStackingConfigStackTrunkPort1 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.2 interfaceindexorzero no-access
The IfIndex for the first (primary) port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain more than one port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist.
                   snStackingConfigStackTrunkPort2 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.3 interfaceindexorzero no-access
The IfIndex for the second port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist.
                   snStackingConfigStackTrunkRowStatus 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.4 integer read-write
This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid Enumeration: 'create': 4, 'other': 1, 'valid': 2, 'delete': 3.
                   snStackingConfigStackTrunkNumPort1 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.5 integer32 read-only
Number of logical ports for the first (primary) port of the configured stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist.
                   snStackingConfigStackTrunkNumPort2 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.6 integer32 read-only
Number of logical ports for the second port of the configured stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port does not exist.
           snStackingConfigPeriPortTable 1.3.6.1.4.1.1991.1.1.3.31.2.4 no-access
Stacking configuration peripheral port table.
               snStackingConfigPeriPortEntry 1.3.6.1.4.1.1991.1.1.3.31.2.4.1 no-access
An entry in the stacking configuration peripheral port table.
                   snStackingConfigPeriPortUnit 1.3.6.1.4.1.1991.1.1.3.31.2.4.1.1 integer32 no-access
The stacking unit Id
                   snStackingConfigPeriPortPort 1.3.6.1.4.1.1991.1.1.3.31.2.4.1.2 interfaceindexorzero no-access
The IfIndex for the configured mixed stacking peripheral port. It is up to eight peripheral ports per unit.
                   snStackingConfigPeriPortRowStatus 1.3.6.1.4.1.1991.1.1.3.31.2.4.1.3 integer read-write
This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid Enumeration: 'create': 4, 'other': 1, 'valid': 2, 'delete': 3.
           snStackingConfigPeriTrunkTable 1.3.6.1.4.1.1991.1.1.3.31.2.5 no-access
Stacking configuration peripheral trunk table.
               snStackingConfigPeriTrunkEntry 1.3.6.1.4.1.1991.1.1.3.31.2.5.1 no-access
An entry in the stacking configuration peripheral trunk table.
                   snStackingConfigPeriTrunkUnit 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.1 integer32 no-access
The stacking unit Id
                   snStackingConfigPeriTrunkPort1 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.2 interfaceindexorzero no-access
The IfIndex for the first port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks per unit.
                   snStackingConfigPeriTrunkPort2 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.3 interfaceindexorzero no-access
The IfIndex for the second port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks per unit.
                   snStackingConfigPeriTrunkRowStatus 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.4 integer read-write
This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid Enumeration: 'create': 4, 'other': 1, 'valid': 2, 'delete': 3.
           snStackingNeighborPortTable 1.3.6.1.4.1.1991.1.1.3.31.2.6 no-access
Stacking neighbor port table.
               snStackingNeighborPortEntry 1.3.6.1.4.1.1991.1.1.3.31.2.6.1 no-access
An entry in the stacking neighborport table.
                   snStackingNeighborPortUnit 1.3.6.1.4.1.1991.1.1.3.31.2.6.1.1 integer32 no-access
The stacking unit Id
                   snStackingNeighborPortStackPort 1.3.6.1.4.1.1991.1.1.3.31.2.6.1.2 interfaceindexorzero no-access
The IfIndex for the stack port on this unit. It is up to ten stack ports and peripheral ports per unit.
                   snStackingNeighborPortNeighborPort 1.3.6.1.4.1.1991.1.1.3.31.2.6.1.3 interfaceindexorzero read-only
The IfIndex for the neighbor port of the stack port on this unit. It returns 0 if neighbor port does not exist for this stack port.