FOUNDRY-SN-MAC-VLAN-MIB: View SNMP OID List / Download MIB

VENDOR: BROCADE


 Home MIB: FOUNDRY-SN-MAC-VLAN-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, IF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 snMacVlan 1.3.6.1.4.1.1991.1.1.3.30
Management Information Base module for MAC-based Vlan configuration and statistics.
       snMacVlanGlobalObjects 1.3.6.1.4.1.1991.1.1.3.30.1
           snMacVlanGlobalClearOper 1.3.6.1.4.1.1991.1.1.3.30.1.1 integer read-write
valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear operational MAC-based Vlan entry for all ports. Enumeration: 'clear': 1, 'valid': 0.
           snMacVlanGlobalDynConfigState 1.3.6.1.4.1.1991.1.1.3.30.1.2 integer read-write
Enable/disable MAC-based VLAN dynamic activation on the global level. Enumeration: 'disabled': 0, 'enabled': 1.
       snMacVlanTableObjects 1.3.6.1.4.1.1991.1.1.3.30.2
           snMacVlanPortMemberTable 1.3.6.1.4.1.1991.1.1.3.30.2.1 no-access
MAC-based Vlan port membership table.
               snMacVlanPortMemberEntry 1.3.6.1.4.1.1991.1.1.3.30.2.1.1 no-access
An entry of the MAC-based Vlan port membership table.
                   snMacVlanPortMemberVLanId 1.3.6.1.4.1.1991.1.1.3.30.2.1.1.1 integer no-access
The VLAN identifier (VLAN ID).
                   snMacVlanPortMemberPortId 1.3.6.1.4.1.1991.1.1.3.30.2.1.1.2 interfaceindex no-access
The ifIndex which is a member of the MAC-based VLAN.
                   snMacVlanPortMemberRowStatus 1.3.6.1.4.1.1991.1.1.3.30.2.1.1.3 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid Enumeration: 'create': 4, 'other': 1, 'valid': 2, 'delete': 3.
           snMacVlanIfTable 1.3.6.1.4.1.1991.1.1.3.30.2.2 no-access
MAC-based Vlan Interface table.
               snMacVlanIfEntry 1.3.6.1.4.1.1991.1.1.3.30.2.2.1 no-access
An entry in the MAC-based Vlan interface table.
                   snMacVlanIfIndex 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.1 interfaceindex no-access
The ifIndex which is a member of the MAC-based VLAN.
                   snMacVlanIfEnable 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.2 integer read-write
The administrative status requested by management for MAC-based Vlan on this interface. The value enabled(1) indicates that MAC-based Vlan should be enabled on this interface, When disabled(2), MAC-based Vlan is disabled on this interface. Enable/disable MAC-based Vlan on this interface. Enumeration: 'disabled': 0, 'enabled': 1.
                   snMacVlanIfMaxEntry 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.3 integer32 read-write
The maximum number of allowed and denied MAC address (static and dynamic) that can be leared on an interface. The default value is 2. The value should be between 2 to 32.
                   snMacVlanIfClearOper 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.4 integer read-write
valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clearing operational MAC-based Vlan entry for a port. Enumeration: 'clear': 1, 'valid': 0.
                   snMacVlanIfClearConfig 1.3.6.1.4.1.1991.1.1.3.30.2.2.1.5 integer read-write
valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clearing configured MAC-based Vlan entry for a port. Enumeration: 'clear': 1, 'valid': 0.
           snMacBasedVlanTable 1.3.6.1.4.1.1991.1.1.3.30.2.3 no-access
MAC-based Vlan table.
               snMacBasedVlanEntry 1.3.6.1.4.1.1991.1.1.3.30.2.3.1 no-access
An entry in the MAC-based Vlan table.
                   snMacBasedVlanId 1.3.6.1.4.1.1991.1.1.3.30.2.3.1.1 integer no-access
The ID of a VLAN of which this port is a mac-vlan-permit member. Port must be untagged. This object return 0 which is an invalid VLAN ID value.
                   snMacBasedVlanMac 1.3.6.1.4.1.1991.1.1.3.30.2.3.1.2 macaddress no-access
A host source MAC address to be authenticated.
                   snMacBasedVlanPriority 1.3.6.1.4.1.1991.1.1.3.30.2.3.1.3 integer32 read-write
The priority of the source MAC address.
                   snMacBasedVlanRowStatus 1.3.6.1.4.1.1991.1.1.3.30.2.3.1.4 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid Enumeration: 'create': 4, 'other': 1, 'valid': 2, 'delete': 3.