FORCES-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: FORCES-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 forcesMib 1.3.6.1.2.1.187
This MIB module contains managed object definitions for the ForCES Protocol. Copyright (c) 2010 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this MIB module is part of RFC 5813; see the RFC itself for full legal notices.
         forcesMibNotifications 1.3.6.1.2.1.187.0
             forcesAssociationEntryUp 1.3.6.1.2.1.187.0.1
This notification is generated as soon as an association enters the UP state. Note that these notifications are not throttled as the CE itself should throttle the setup of associations.
             forcesAssociationEntryDown 1.3.6.1.2.1.187.0.2
This notification is generated as soon as an association leaves the UP state. Note that these notifications are not throttled as the CE itself should throttle the setup of associations.
             forcesAssociationEntryUpStats 1.3.6.1.2.1.187.0.3
This notification is generated as soon as an association enters the UP state. Note that these notifications are not throttled as the CE itself should throttle the setup of associations.
             forcesAssociationEntryDownStats 1.3.6.1.2.1.187.0.4
This notification is generated as soon as an association leaves the UP state. Note that these notifications are not throttled as the CE itself should throttle the setup of associations.
         forcesMibObjects 1.3.6.1.2.1.187.1
             forcesLatestProtocolVersionSupported 1.3.6.1.2.1.187.1.1 forcesprotocolversion read-only
The ForCES protocol version supported by the CE. The current protocol version is 1. Note that the CE must also allow interaction with FEs supporting earlier versions.
             forcesAssociations 1.3.6.1.2.1.187.1.2
                 forcesAssociationTable 1.3.6.1.2.1.187.1.2.1 no-access
The (conceptual) table of associations.
                     forcesAssociationEntry 1.3.6.1.2.1.187.1.2.1.1 no-access
A (conceptual) entry for one association.
                         forcesAssociationCEID 1.3.6.1.2.1.187.1.2.1.1.1 forcesid no-access
The ForCES ID of the CE.
                         forcesAssociationFEID 1.3.6.1.2.1.187.1.2.1.1.2 forcesid no-access
The ForCES ID of the FE.
                         forcesAssociationRunningProtocolVersion 1.3.6.1.2.1.187.1.2.1.1.3 forcesprotocolversion read-only
The current ForCES protocol version used in this association. The current protocol version is 1.
                         forcesAssociationTimeUp 1.3.6.1.2.1.187.1.2.1.1.4 timestamp read-only
The value of sysUpTime at the time this association entered the UP state. If this association started prior to the last initialization of the network subsystem, then this object contains a zero value. This object allows to uniquely identify associations with the same CE and FE IDs.
                         forcesAssociationTimeDown 1.3.6.1.2.1.187.1.2.1.1.5 timestamp no-access
The value of sysUpTime at the time this association left the UP state.
                         forcesAssociationHBMsgSent 1.3.6.1.2.1.187.1.2.1.1.6 zerobasedcounter32 read-only
A counter of how many Heartbeat messages have been sent by the CE on this association since the association entered the UP state. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of forcesAssociationCounterDiscontinuityTime.
                         forcesAssociationHBMsgReceived 1.3.6.1.2.1.187.1.2.1.1.7 zerobasedcounter32 read-only
A counter of how many Heartbeat messages have been received by the CE on this association since the association entered the UP state. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of forcesAssociationCounterDiscontinuityTime.
                         forcesAssociationOperMsgSent 1.3.6.1.2.1.187.1.2.1.1.8 zerobasedcounter32 read-only
A counter of how many messages other than Heartbeat (i.e., Config and Query) have been sent by the CE on this association since the association entered the UP state. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of forcesAssociationCounterDiscontinuityTime.
                         forcesAssociationOperMsgReceived 1.3.6.1.2.1.187.1.2.1.1.9 zerobasedcounter32 read-only
A counter of how many messages other than Heartbeat (i.e., Config response, Query response, event notification, and packet redirect) have been received by the CE on this association since the association entered the UP state. Discontinuities in the value of this counter can occur at reinitialization of the management system, and at other times as indicated by the value of forcesAssociationCounterDiscontinuityTime.
                         forcesAssociationCounterDiscontinuityTime 1.3.6.1.2.1.187.1.2.1.1.10 timestamp read-only
The value of sysUpTime on the most recent occasion at which any one or more of this association's counters suffered a discontinuity. The relevant counters are the specific instances associated with this association of any ZeroBasedCounter32 object contained in the forcesAssociationTable. If no such discontinuities have occurred since the last reinitialization of the local management subsystem, then this object contains a zero value.
         forcesMibConformance 1.3.6.1.2.1.187.2
             forcesMibCompliances 1.3.6.1.2.1.187.2.1
                 forcesMibCompliance 1.3.6.1.2.1.187.2.1.1
The compliance statement for routers running ForCES and implementing the ForCES MIB.
             forcesMibGroups 1.3.6.1.2.1.187.2.2
                 forcesNotificationGroup 1.3.6.1.2.1.187.2.2.1
A collection of notifications for signaling important ForCES events.
                 forcesMibGroup 1.3.6.1.2.1.187.2.2.2
A collection of objects to support management of ForCES routers.
                 forcesNotificationStatsGroup 1.3.6.1.2.1.187.2.2.3
A collection of optional notifications for signaling important ForCES events including statistics.
                 forcesStatsGroup 1.3.6.1.2.1.187.2.2.4
A collection of optional objects to provide extra information about the associations. There is no protocol reason to keep such information, but these objects can be very useful in debugging connectivity problems.