FIBRONICS-PROPRIETARY-FX8210-B-MIB: View SNMP OID List / Download MIB

VENDOR: FIBRONICS


 Home MIB: FIBRONICS-PROPRIETARY-FX8210-B-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 spartacus 1.3.6.1.4.1.22
       dec 1.3.6.1.4.1.22.2
           decrun 1.3.6.1.4.1.22.2.1
               rcircs 1.3.6.1.4.1.22.2.1.1
                   rCircNum 1.3.6.1.4.1.22.2.1.1.1 integer read-only
                   rccTable 1.3.6.1.4.1.22.2.1.1.2 no-access
                       rccEntry 1.3.6.1.4.1.22.2.1.1.2.1 no-access
                           rccIndex 1.3.6.1.4.1.22.2.1.1.2.1.1 integer read-only
                           rccState 1.3.6.1.4.1.22.2.1.1.2.1.2 integer read-write
                           rccType 1.3.6.1.4.1.22.2.1.1.2.1.3 integer read-only
                           rccCost 1.3.6.1.4.1.22.2.1.1.2.1.4 integer read-write
                           rccBSize 1.3.6.1.4.1.22.2.1.1.2.1.5 integer read-only
                           rccHTimer 1.3.6.1.4.1.22.2.1.1.2.1.6 integer read-write
                           rccLine 1.3.6.1.4.1.22.2.1.1.2.1.7 integer read-only
                   rbcTable 1.3.6.1.4.1.22.2.1.1.3 no-access
                       rbcEntry 1.3.6.1.4.1.22.2.1.1.3.1 no-access
The INDEX value specified should correspond to the index of the circuit of the desired entry.
                           rbcDrout 1.3.6.1.4.1.22.2.1.1.3.1.1 octet string read-only
                           rbcMrout 1.3.6.1.4.1.22.2.1.1.3.1.2 integer read-write
                           rbcRpri 1.3.6.1.4.1.22.2.1.1.3.1.3 integer read-write
                   rCCntrs 1.3.6.1.4.1.22.2.1.1.4 no-access
                       rCCntrEntry 1.3.6.1.4.1.22.2.1.1.4.1 no-access
The INDEX value specified should correspond to the index of the circuit of the desired entry.
                           rCCntTePktsIn 1.3.6.1.4.1.22.2.1.1.4.1.1 counter read-only
                           rCCntOPktsOut 1.3.6.1.4.1.22.2.1.1.4.1.2 counter read-only
                           rCCntTrPktsIn 1.3.6.1.4.1.22.2.1.1.4.1.3 counter read-only
                           rCCntTrPktsOut 1.3.6.1.4.1.22.2.1.1.4.1.4 counter read-only
                           rCCntAdjDown 1.3.6.1.4.1.22.2.1.1.4.1.5 counter read-only
               rnodes 1.3.6.1.4.1.22.2.1.2
                   rnNmParms 1.3.6.1.4.1.22.2.1.2.1
                       rnNmId 1.3.6.1.4.1.22.2.1.2.1.1 octet string read-only
                       rnNmPaddr 1.3.6.1.4.1.22.2.1.2.1.2 octet string read-only
                   rnRtParms 1.3.6.1.4.1.22.2.1.2.2
                       rnRpAMaxC 1.3.6.1.4.1.22.2.1.2.2.1 integer read-write
                       rnRpAMaxH 1.3.6.1.4.1.22.2.1.2.2.2 integer read-write
                       rnRpBRtTmr 1.3.6.1.4.1.22.2.1.2.2.3 integer read-write
                       rnRpBSize 1.3.6.1.4.1.22.2.1.2.2.4 integer read-write
                       rnRpMAddr 1.3.6.1.4.1.22.2.1.2.2.5 integer read-write
                       rnRpMArea 1.3.6.1.4.1.22.2.1.2.2.6 integer read-write
                       rnRpMaxBNR 1.3.6.1.4.1.22.2.1.2.2.7 integer read-write
                       rnRpMaxBR 1.3.6.1.4.1.22.2.1.2.2.8 integer read-write
                       rnRpMaxCir 1.3.6.1.4.1.22.2.1.2.2.9 integer read-only
                       rnRpMaxCost 1.3.6.1.4.1.22.2.1.2.2.10 integer read-write
                       rnRpMaxHops 1.3.6.1.4.1.22.2.1.2.2.11 integer read-write
                       rnRpMaxV 1.3.6.1.4.1.22.2.1.2.2.12 integer read-write
                       rnRpVers 1.3.6.1.4.1.22.2.1.2.2.13 octet string read-only
                       rnRpSegBuf 1.3.6.1.4.1.22.2.1.2.2.14 integer read-only
                       rnRpType 1.3.6.1.4.1.22.2.1.2.2.15 integer read-write
                       rnRpAddr 1.3.6.1.4.1.22.2.1.2.2.16 octet string read-only
                       rnRpUseL2A 1.3.6.1.4.1.22.2.1.2.2.17 integer read-write
                   rnRtCount 1.3.6.1.4.1.22.2.1.2.3
                       rnRcAgedPkt 1.3.6.1.4.1.22.2.1.2.3.1 counter read-only
                       rnRcUnReach 1.3.6.1.4.1.22.2.1.2.3.2 counter read-only
                       rnRcBadRange 1.3.6.1.4.1.22.2.1.2.3.3 counter read-only
                       rnRcOversize 1.3.6.1.4.1.22.2.1.2.3.4 counter read-only
                       rnRcFormErr 1.3.6.1.4.1.22.2.1.2.3.5 counter read-only
                       rnRcRtUpLoss 1.3.6.1.4.1.22.2.1.2.3.6 counter read-only
                   rnAdjTbl 1.3.6.1.4.1.22.2.1.2.4 no-access
                       rnAdjEnt 1.3.6.1.4.1.22.2.1.2.4.1 no-access
                           rnAdjAddr 1.3.6.1.4.1.22.2.1.2.4.1.1 octet string read-only
                           rnAdjState 1.3.6.1.4.1.22.2.1.2.4.1.2 integer read-only
                           rnAdjType 1.3.6.1.4.1.22.2.1.2.4.1.3 integer read-only
                           rnAdjCIdx 1.3.6.1.4.1.22.2.1.2.4.1.4 integer read-only
                           rnAdjBSize 1.3.6.1.4.1.22.2.1.2.4.1.5 integer read-only
                           rnAdjLTmr 1.3.6.1.4.1.22.2.1.2.4.1.6 integer read-only
                           rnAdjPri 1.3.6.1.4.1.22.2.1.2.4.1.7 integer read-only
                   rnLvl1Tbl 1.3.6.1.4.1.22.2.1.2.5 no-access
                       rnLvl1Ent 1.3.6.1.4.1.22.2.1.2.5.1 no-access
                           rnLvl1Addr 1.3.6.1.4.1.22.2.1.2.5.1.1 octet string read-only
                           rnLvl1Cidx 1.3.6.1.4.1.22.2.1.2.5.1.2 integer read-only
                           rnLvl1Cost 1.3.6.1.4.1.22.2.1.2.5.1.3 integer read-only
                           rnLvl1Hops 1.3.6.1.4.1.22.2.1.2.5.1.4 integer read-only
                           rnLvl1Next 1.3.6.1.4.1.22.2.1.2.5.1.5 octet string read-only
               rareas 1.3.6.1.4.1.22.2.1.3
                   raParmTbl 1.3.6.1.4.1.22.2.1.3.1 no-access
                       raParmEntry 1.3.6.1.4.1.22.2.1.3.1.1 no-access
                           raNum 1.3.6.1.4.1.22.2.1.3.1.1.1 integer read-only
                           raCIdx 1.3.6.1.4.1.22.2.1.3.1.1.2 integer read-only
                           raCost 1.3.6.1.4.1.22.2.1.3.1.1.3 integer read-only
                           raHops 1.3.6.1.4.1.22.2.1.3.1.1.4 integer read-only
                           raNext 1.3.6.1.4.1.22.2.1.3.1.1.5 octet string read-only
           decperm 1.3.6.1.4.1.22.2.2
               pcircs 1.3.6.1.4.1.22.2.2.1
                   pccTable 1.3.6.1.4.1.22.2.2.1.1 no-access
                       pccEntry 1.3.6.1.4.1.22.2.2.1.1.1 no-access
                           pccIndex 1.3.6.1.4.1.22.2.2.1.1.1.1 integer read-only
                           pccState 1.3.6.1.4.1.22.2.2.1.1.1.2 integer read-write
                           pccCost 1.3.6.1.4.1.22.2.2.1.1.1.3 integer read-write
                           pccHTimer 1.3.6.1.4.1.22.2.2.1.1.1.4 integer read-write
                   pbcTable 1.3.6.1.4.1.22.2.2.1.2 no-access
                       pbcEntry 1.3.6.1.4.1.22.2.2.1.2.1 no-access
The INDEX value specified should correspond to the index of the circuit of the desired entry.
                           pbcMrout 1.3.6.1.4.1.22.2.2.1.2.1.1 integer read-write
                           pbcRpri 1.3.6.1.4.1.22.2.2.1.2.1.2 integer read-write
               pnodes 1.3.6.1.4.1.22.2.2.2
                   pnRtParms 1.3.6.1.4.1.22.2.2.2.1
                       pnRpAMaxC 1.3.6.1.4.1.22.2.2.2.1.1 integer read-write
                       pnRpAMaxH 1.3.6.1.4.1.22.2.2.2.1.2 integer read-write
                       pnRpBRtTmr 1.3.6.1.4.1.22.2.2.2.1.3 integer read-write
                       pnRpBSize 1.3.6.1.4.1.22.2.2.2.1.4 integer read-write
                       pnRpMAddr 1.3.6.1.4.1.22.2.2.2.1.5 integer read-write
                       pnRpMArea 1.3.6.1.4.1.22.2.2.2.1.6 integer read-write
                       pnRpMaxBNR 1.3.6.1.4.1.22.2.2.2.1.7 integer read-write
                       pnRpMaxBR 1.3.6.1.4.1.22.2.2.2.1.8 integer read-write
                       pnRpMaxCost 1.3.6.1.4.1.22.2.2.2.1.9 integer read-write
                       pnRpMaxHops 1.3.6.1.4.1.22.2.2.2.1.10 integer read-write
                       pnRpMaxV 1.3.6.1.4.1.22.2.2.2.1.11 integer read-write
                       pnRpType 1.3.6.1.4.1.22.2.2.2.1.12 integer read-write
                       pnRpAddr 1.3.6.1.4.1.22.2.2.2.1.13 octet string read-write
                       pnRpUseL2A 1.3.6.1.4.1.22.2.2.2.1.14 integer read-write
                       pnRpRstDaddr 1.3.6.1.4.1.22.2.2.2.1.15 integer read-write
               pDecDefaults 1.3.6.1.4.1.22.2.2.3 integer read-write
When this object is set to 1, the side effect will be to cause the unit to reset all the objects defined under the subtree decperm to their default values. Reading this object has no meaning. The integer value 1 will be returned to a get or get-next request. Enumeration: 'reset-defaults': 1.
       trap 1.3.6.1.4.1.22.3
           traprun 1.3.6.1.4.1.22.3.1
               rTrapAddrTbl 1.3.6.1.4.1.22.3.1.1 no-access
This table contains runtime information about destinations to which traps should be directed. Setting the rTrapAddrState to INACTIVE removes an entry from the table.
                   rTrapAddrEntry 1.3.6.1.4.1.22.3.1.1.1 no-access
This object contains runtime information about an individual trap destination.
                       rTrapAddrAddr 1.3.6.1.4.1.22.3.1.1.1.1 ipaddress read-write
The IP address of the network management entity to which traps (of the type specified in this table entry) should be sent.
                       rTrapAddrComm 1.3.6.1.4.1.22.3.1.1.1.2 octet string read-write
Community string to be used in SNMP message generated to the receiving SNMP protocol entity.
                       rTrapAddrVer 1.3.6.1.4.1.22.3.1.1.1.3 integer read-write
The trap address table version number. The current (and only valid) version number is 1.
                       rTrapAddrType 1.3.6.1.4.1.22.3.1.1.1.4 octet string read-write
A bit-encoded string, 1 byte in length, which contains information about which trap(s) should be directed to the management entity described by this table entry. The following list identifies the trap types and corresponding bit values. TRAP-STANDARD-MIB 1000 0000 TRAP-DIAG 0100 0000 TRAP-GNRL-PROPRIETARY 0010 0000 TRAP-ROUT 0001 0000 TRAP-DEBUG 0000 1000 TRAP-PROP-DEC4 0000 0100
                       rTrapAddrState 1.3.6.1.4.1.22.3.1.1.1.5 integer read-write
The state of this entry in the trap address table. Setting this object to INACTIVE removes the corresponding entry from the table. Enumeration: 'active': 1, 'inactive': 2.
           traperm 1.3.6.1.4.1.22.3.2
               pTrapAddrTbl 1.3.6.1.4.1.22.3.2.1 no-access
This table contains permanent information about destinations to which traps should be directed. Setting the pTrapAddrState to INACTIVE removes an entry from the table. This information is used to initialize the rTrapAddrTbl on unit startup.
                   pTrapAddrEntry 1.3.6.1.4.1.22.3.2.1.1 no-access
This object contains permanent information about an individual trap destination.
                       pTrapAddrAddr 1.3.6.1.4.1.22.3.2.1.1.1 ipaddress read-write
The IP address of the network management entity to which traps (of the type specified in this table entry) should be sent.
                       pTrapAddrComm 1.3.6.1.4.1.22.3.2.1.1.2 octet string read-write
Community string to be used in SNMP message generated to the receiving SNMP protocol entity.
                       pTrapAddrVer 1.3.6.1.4.1.22.3.2.1.1.3 integer read-write
The trap address table version number. The current (and only valid) version number is 1.
                       pTrapAddrType 1.3.6.1.4.1.22.3.2.1.1.4 octet string read-write
A bit-encoded string, 1 byte in length, which contains information about which trap(s) should be directed to the management entity described by this table entry. The following list identifies the trap types and corresponding bit values. TRAP-STANDARD-MIB 1000 0000 TRAP-DIAG 0100 0000 TRAP-GNRL-PROPRIETARY 0010 0000 TRAP-ROUT 0001 0000 TRAP-DEBUG 0000 1000 TRAP-PROP-DEC4 0000 0100
                       pTrapAddrState 1.3.6.1.4.1.22.3.2.1.1.5 integer read-write
The state of this entry in the trap address table. Setting this object to INACTIVE removes the corresponding entry from the table.
               pTrapDefaults 1.3.6.1.4.1.22.3.2.2 integer read-write
When this object is set to 1, the side effect will be to cause the unit to reset all the objects defined under the subtree traperm to their default values. Reading this object has no meaning. The integer value 1 will be returned to a get or get-next request. Enumeration: 'reset-defautls': 1.
       dec2 1.3.6.1.4.1.22.4
           dec2run 1.3.6.1.4.1.22.4.1
               rClParmTbl 1.3.6.1.4.1.22.4.1.1 no-access
                   rClParmEntry 1.3.6.1.4.1.22.4.1.1.1 no-access
The INDEX value specified should correspond to the index of the interface of the desired entry.
                       rClState 1.3.6.1.4.1.22.4.1.1.1.1 integer read-write
                       rClSubSt 1.3.6.1.4.1.22.4.1.1.1.2 integer read-only
               rBlParmTbl 1.3.6.1.4.1.22.4.1.2 no-access
                   rBlParmEntry 1.3.6.1.4.1.22.4.1.2.1 no-access
The INDEX value specified should correspond to the index of the interface of the desired entry.
                       rBlHAddr 1.3.6.1.4.1.22.4.1.2.1.1 octet string read-only
               rElCountTbl 1.3.6.1.4.1.22.4.1.3 no-access
                   rElCountEntry 1.3.6.1.4.1.22.4.1.3.1 no-access
The INDEX value specified should correspond to the index of the interface of the desired entry.
                       rElFrIn 1.3.6.1.4.1.22.4.1.3.1.1 counter read-only
                       rElFrOut 1.3.6.1.4.1.22.4.1.3.1.2 counter read-only
                       rElBcBIn 1.3.6.1.4.1.22.4.1.3.1.3 counter read-only
                       rElBcFIn 1.3.6.1.4.1.22.4.1.3.1.4 counter read-only
                       rElMcBIn 1.3.6.1.4.1.22.4.1.3.1.5 counter read-only
                       rElMcFIn 1.3.6.1.4.1.22.4.1.3.1.6 counter read-only
                       rElFDef 1.3.6.1.4.1.22.4.1.3.1.7 counter read-only
                       rElF1Col 1.3.6.1.4.1.22.4.1.3.1.8 counter read-only
                       rElFMCol 1.3.6.1.4.1.22.4.1.3.1.9 counter read-only
                       rElOutF 1.3.6.1.4.1.22.4.1.3.1.10 counter read-only
                       rElCDetF 1.3.6.1.4.1.22.4.1.3.1.11 counter read-only
                       rElInF 1.3.6.1.4.1.22.4.1.3.1.12 counter read-only
                       rElBadD 1.3.6.1.4.1.22.4.1.3.1.13 counter read-only
                       rElOvRun 1.3.6.1.4.1.22.4.1.3.1.14 counter read-only
                       rElNoBuf 1.3.6.1.4.1.22.4.1.3.1.15 counter read-only
           dec2perm 1.3.6.1.4.1.22.4.2
       propSys 1.3.6.1.4.1.22.5
           propSysRun 1.3.6.1.4.1.22.5.1
               rTod 1.3.6.1.4.1.22.5.1.1 octet string read-write
This is a 15 byte string containing the Greenwich Mean Time formatted as: YYMMDDHHMMSSUUU, where: YY = year DD = day HH = hours MM = minutes SS = seconds UUU = microseconds
               rFddiIfIndex 1.3.6.1.4.1.22.5.1.2 integer read-only
The snmp Fddi interface Number
               rPingTable 1.3.6.1.4.1.22.5.1.3 no-access
A table of requests for ping via ICMP echo. No modification of existing table entries is allowed, only addition of new entries.
                   rPingEntry 1.3.6.1.4.1.22.5.1.3.1 no-access
The list of parameters required to perform a ping request
                       rPProto 1.3.6.1.4.1.22.5.1.3.1.1 integer read-write
The protocol to be used for the ping request. Future versions will also support Loopback Mirror and Decnet Circuit Loopback. Enumeration: 'icmp-echo': 1.
                       rPDest 1.3.6.1.4.1.22.5.1.3.1.2 ipaddress read-write
The network address of the node to ping.
                       rPTimeOut 1.3.6.1.4.1.22.5.1.3.1.3 integer read-write
Timeout in seconds to allow for the remote node to respond.
                       rPReply 1.3.6.1.4.1.22.5.1.3.1.4 integer read-write
Reply to ICMP echo received by agent. NOTE: Although this object is defined as read-write, attempting to write any value results in an error. Enumeration: 'no-response': 2, 'in-process': 3, 'alive': 1.
                       rPState 1.3.6.1.4.1.22.5.1.3.1.5 integer read-write
The state of the entry. When this state is set to ACTIVE, the appropriate ping request will be issued by Brouter. A table entry with a state of INACTIVE is an invalidated entry and will not be returned to a get request. Enumeration: 'active': 1, 'inactive': 2.
               rDebugTable 1.3.6.1.4.1.22.5.1.4 no-access
A table of entries used to manage debug reporting from the Brouter.
                   rDebugEntry 1.3.6.1.4.1.22.5.1.4.1 no-access
Variables needed to maintain the FPP debug mechanisms.
                       rDTaskId 1.3.6.1.4.1.22.5.1.4.1.1 integer read-only
Task-id assigned to the task being debugged. Task-id`s are assigned as follows: IP-ID 2 ICMP-ID 3 RIP-ID 4 UDP-ID 6 ARP-ID 7 KSMAP-ID 8 FMAINP-ID 9 SYSTEM-ID 10 PROXY-ARP-ID 11
                       rDDevStat 1.3.6.1.4.1.22.5.1.4.1.2 integer read-write
Indicates whether the development level debug messages for this module should be reported to the NMS. Enumeration: 'on': 1, 'off': 2.
                       rDRunStat 1.3.6.1.4.1.22.5.1.4.1.3 integer read-write
Indicates whether the runtime network diagnostic messages for this module should be reported to the NMS. Enumeration: 'on': 1, 'off': 2.
               rUDnld 1.3.6.1.4.1.22.5.1.7 integer read-write
Setting this object to 1 has the side effect of causing the unit to perform a cold reset. Reading this object has no meaning. The value 1 is returned in response to a get or get-next request.
               rURset 1.3.6.1.4.1.22.5.1.8 integer read-write
Setting this object to 1 has the side effect of causing the unit to perform a warm reset. Reading this object has no meaning. The value 1 is returned in response to a get or get-next request.
               rUIpSw 1.3.6.1.4.1.22.5.1.10 integer read-write
Indicates the state of the IP routing feature. If this switch is turned OFF, IP traffic will not be routed through the brouter. IP messages destined for the brouter will be delivered to the unit's upper layers. This leaves the SNMP agent accessible to its manager even when IP routing is de-activated. If bridging is activated, the IP traffic will be bridged. Enumeration: 'on': 1, 'off': 2.
               rUDecSw 1.3.6.1.4.1.22.5.1.11 integer read-write
Indicates the state of the Decnet feature. If this switch is turned OFF, no Decnet traffic will be routed through this unit. If bridging is activated, the Decnet trafic will be bridged. Enumeration: 'on': 1, 'off': 2.
               rUBrSw 1.3.6.1.4.1.22.5.1.12 integer read-write
Indicates the state of the bridging feature. If this switch is turned OFF, no traffic will be bridged through this unit. All traffic will be required to be sent through one of the active routing functions. Enumeration: 'on': 1, 'off': 2.
               rUIpCfg 1.3.6.1.4.1.22.5.1.13 integer read-write
Indicates the state of IP routing based on its (sub)net configuration. RT-CFG-HOST-ONLY indicates that there is only one IP address in the unit. All IP packets received while in this state will be bridged as an unknown protocol. Enumeration: 'rt-cfg-rte-all': 4, 'rt-cfg-br-ether': 2, 'rt-cfg-host-only': 1, 'rt-cfg-br-all': 3.
               rURunningVersion 1.3.6.1.4.1.22.5.1.14 octet string read-only
Indicates the running version.
               rUDnldAllowed 1.3.6.1.4.1.22.5.1.15 integer read-write
Indicates whether downloading to the brouter's Flash memory will be permitted. If this flag is set to OFF the agent will refuse to download into its flash memory. At system start-up this parameter will be initialized to OFF. Once this has been set to ON, it will remain ON until either the user sets it to OFF or a download has been performed at which time the agent will set it to OFF. Enumeration: 'true': 1, 'false': 2.
               rUInitFlash 1.3.6.1.4.1.22.5.1.16 integer read-write
Indicates if the flash bank states are being initialized. If this object is set to TRUE, the side effect will be to cause the flash states to be initialized. If the flash is in the process of being initialized, a get or getnext operation performed on this object will return 1 (TRUE), otherwise it will return 2 (FALSE). Enumeration: 'true': 1, 'false': 2.
           propSysPerm 1.3.6.1.4.1.22.5.2
               pPMibVer 1.3.6.1.4.1.22.5.2.2 integer read-only
Proprietary mib version number.
               pEepVer 1.3.6.1.4.1.22.5.2.4 integer read-only
Version number supported in the EEPROM. Enumeration: 'single-eth': 1, 'dual-eth': 2, 'brouter': 3.
               pUIpSw 1.3.6.1.4.1.22.5.2.6 integer read-write
Permanently stored (EEPROM) value for IP routing status. See rUIpSw for a complete description. The default value for this object is ON. Enumeration: 'on': 1, 'off': 2.
               pUDecSw 1.3.6.1.4.1.22.5.2.7 integer read-write
Permanently stored (EEPROM) value for DECnet routing status. See rUDecSw for a complete description. The default value for this object is ON. Enumeration: 'on': 1, 'off': 2.
               pUBrSw 1.3.6.1.4.1.22.5.2.8 integer read-write
Permanently stored (EEPROM) value for bridging status. See rUBrSw for a complete description. The default value for this object is ON. Enumeration: 'on': 1, 'off': 2.
               pUIpCfg 1.3.6.1.4.1.22.5.2.9 integer read-only
Permanently stored (EEPROM) value for IP configuration. See rUIpCfg for a complete description. The default value for this object is determined by the IP address stored in the permanent database.
               pULoadVersion 1.3.6.1.4.1.22.5.2.10 octet string read-write
Permanently stored (EEPROM) value for the desired load version. This value of this object indicates which flash-stored version is to be initiated upon reset of this unit.
               pUDefaults 1.3.6.1.4.1.22.5.2.11 integer read-write
When this object is set to 1, the side effect will be to cause the unit to reset all the objects defined under the subtree propSysPerm to their default values. Reading this object has no meaning. The integer value 1 will be returned to a get or get-next request.
               pUFlashTable 1.3.6.1.4.1.22.5.2.12 no-access
Contains the information needed for Flash memory maintenance.
                     pUFlashEntry 1.3.6.1.4.1.22.5.2.12.1 no-access
Information about a particular bank of flash memory.
                         flashIndex 1.3.6.1.4.1.22.5.2.12.1.1 integer read-only
A unique index value for each flash memory bank.
                         flashVersion 1.3.6.1.4.1.22.5.2.12.1.2 octet string read-only
Indicates the version contained in this flash memory bank. If the flash memory bank is uninitialized or invalid, this object will contain a NULL string
                         flashState 1.3.6.1.4.1.22.5.2.12.1.3 integer read-only
Enumeration: 'reset-complete': 5, 'valid': 1, 'reset-in-progress': 4, 'invalid': 2, 'dnloading-in-process': 3.
               sysPermBridgeAvailable 1.3.6.1.4.1.22.5.2.13 integer read-only
Indicates whether the unit supports bridging functionality or not. Enumeration: 'true': 1, 'false': 2.
               sysPermIpAvailable 1.3.6.1.4.1.22.5.2.14 integer read-only
Indicates whether the unit supports IP functionality or not. IP host functionality is always present. Enumeration: 'true': 1, 'false': 2.
               sysPermDecAvailable 1.3.6.1.4.1.22.5.2.15 integer read-only
Indicates whether the unit supports DECnet functionality or not. Enumeration: 'true': 1, 'false': 2.
               pUloadType 1.3.6.1.4.1.22.5.2.50 integer read-write
This object indicates the type of download to be exercised the next time the unit is loaded. It is a choice of: USER 1 MFG 2 DEV 3
       propIp 1.3.6.1.4.1.22.6
           propIpRun 1.3.6.1.4.1.22.6.1
               rIpMaskTable 1.3.6.1.4.1.22.6.1.1 no-access
The list of address masks used by this router for determining its subnets.
                   rIpMaskEntry 1.3.6.1.4.1.22.6.1.1.1 no-access
Items contained in the runtime Address Mask Table.
                       rMaskNet 1.3.6.1.4.1.22.6.1.1.1.1 ipaddress read-write
The IP network this mask is defined for.
                       rMask 1.3.6.1.4.1.22.6.1.1.1.2 ipaddress read-write
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
                       rMaskState 1.3.6.1.4.1.22.6.1.1.1.3 integer read-write
The state of this entry. To remove an entry from the table, simply set this field to INACTIVE. Enumeration: 'active': 1, 'inactive': 2.
               rIpOurAddrTable 1.3.6.1.4.1.22.6.1.2 no-access
Proprietary extensions for the rfc1156 defined ipAddrTable.
                   rIpOurAddrEntry 1.3.6.1.4.1.22.6.1.2.1 no-access
Proprietary extensions for the rfc1156 defined ipAddrEntry. A proprietary ipAddrTable entry contains 4 standard objects and the 4 proprietary objects listed below. The standard objects are: ipAdEntAddr, ipAdEntIfIndex, ipAdEntNetMask and ipAdEntBcastAddr. To add an ipAddrEntry to the ipAddrTable, the rAddrState is the validating item. Therefore, rAddrState must be the last item in the message when adding an entry. The ipAdEntNetMask is determined by the agent. There is a separate mechanism that allows the user to define address masks for the unit. See rIpMaskTable and pIpMaskTable. To add to the ipAddrTable the agent requires the ipAdEntAddr, ipAdEntIfIndex, ipAdEntBcastAddr, rAddrDBcast, rAddrRipMetric and the rAddrRipState followed by the rAddrState. There are 4 default values provided by the agent for this entry: ipAdEntBcastAddr defaults to 'all ones', rAddrDbcast defaults to 'no directed broadcast', rAddrRipState defaults to ON and rAddrRipMetric defaults to 1. To remove an ipAddrEntry, the rAddrState should be set to INACTIVE. The INDEX value specified should correspond to the IP address of the desired entry.
                       rAddrDbcast 1.3.6.1.4.1.22.6.1.2.1.1 integer read-write
Allows the user to set the directed broadcast parameter of an IP network. Default value is 'no directed broadcast'. Enumeration: 'no-directed-bdcst': 1, 'bdcst-host': 2, 'bdcst-net': 3.
                       rAddrRipMetric 1.3.6.1.4.1.22.6.1.2.1.2 integer read-write
A number from 1 to 15 used to calculate the metrics to given destinations, RIP will add this metric to metrics received from other RIP gateways on this (sub)network. In effect, this can be used to prioritize the (sub)network used for a destination reachable via more than one Brouter (sub)network. Default value is 1.
                       rAddrRipState 1.3.6.1.4.1.22.6.1.2.1.3 integer read-write
Defines the current state of the RIP protocol for this IP network. The default value is ON. Enumeration: 'on': 1, 'off': 2, 'quiet': 3.
                       rAddrState 1.3.6.1.4.1.22.6.1.2.1.4 integer read-write
The state of this entry. To remove an entry from the table, simply set this field to INACTIVE. Enumeration: 'active': 1, 'inactive': 2.
               rIpIfTable 1.3.6.1.4.1.22.6.1.3 no-access
Proprietary extensions for the rfc1156 defined ifTable.
                   rIpIfEntry 1.3.6.1.4.1.22.6.1.3.1 no-access
Proprietary extensions for the rfc1156 defined ifEntry. The INDEX value specified should correspond to the index of the interface of the desired entry.
                       rIfArpStat 1.3.6.1.4.1.22.6.1.3.1.1 integer read-write
Allows the user to turn ARP on and off for the interface. Enumeration: 'on': 1, 'off': 2.
                       rIfPArpStat 1.3.6.1.4.1.22.6.1.3.1.2 integer read-write
Allows the user to turn proxy ARP on and off for the interface. Enumeration: 'on': 1, 'off': 2.
                       rIfBcMask 1.3.6.1.4.1.22.6.1.3.1.3 integer read-write
When set to ON, Brouter will broadcast its address mask on start up. When set to OFF, the Brouter will not broadcast its address mask on start up. Enumeration: 'on': 1, 'off': 2.
               rDftGw 1.3.6.1.4.1.22.6.1.4 ipaddress read-write
The IP address of the default gateway.
               rIpAtTable 1.3.6.1.4.1.22.6.1.5 no-access
Proprietary extensions for the rfc1156 defined atTable.
                   rIpAtEntry 1.3.6.1.4.1.22.6.1.5.1 no-access
Proprietary extensions for the rfc1156 defined atEntry. A proprietary atTable entry contains 3 standard objects and the 2 proprietary objects listed below. The standard objects are: atIfIndex, atPhysAddress and atNetAddress. To add an atEntry to the atTable, MIB-II defines the atPhysAddress as the validating item. Therefore, atPhysAddress must be the last item in the message when adding an entry. To add to the atTable the user must provide the atNetAddress followed by the atPhysAddress. The 2 proprietary objects associated with this entry are provided by the agent. The rAtAge is incremented as the entry ages and the rAtStatic entry is set to static. All atEntries manually defined are considered static and are not removed by the agent until specifically requested by the manager. To remove an atEntry, the atPhysAddress should be set to a NULL string. The INDEX value is constructed from the interface index of the desired entry, the integer value 1, and the network address of the desired entry.
                       rAtStatic 1.3.6.1.4.1.22.6.1.5.1.1 integer read-only
Defines an entry as static or dynamic. A static entry is one that has been entered manually by the network administrator and can be changed only by the network administrator. The routing protocols never overwrite a static entry. A dynamic entry is one created by the routing protocols and is updated by them as per standard definitions. Enumeration: 'static': 1, 'dynamic': 2.
                       rAtAge 1.3.6.1.4.1.22.6.1.5.1.2 integer read-only
The age of the entry in minutes.
               rIpRtTable 1.3.6.1.4.1.22.6.1.6 no-access
Proprietary extensions for the rfc1156 defined ipRoutingTable.
                   rIpRtEntry 1.3.6.1.4.1.22.6.1.6.1 no-access
Proprietary extensions for the rfc1156 defined ipRoutingEntry. A proprietary ipRouteEntry entry contains 10 standard objects and the proprietary object listed below. The standard objects are: ipRouteDest, ipRouteIfIndex, ipRouteMetric1, ipRouteMetric2, ipRouteMetric3, ipRouteMetric4, ipRouteNextHop, ipRouteType, ipRouteProto and ipRouteAge. To add an atEntry to the ipRoutingTable, MIB-II defines the ipRouteType as the validating item. Therefore, ipRouteType must be the last item in the message when adding an entry. All items, both proprietary and standard, except the ipRouteDest, ipRouteNextHop, ipRouteMetric1, and ipRouteType are determined by the agent. To add to the ipRouteEntry the agent requires the ipRouteDest, ipRouteNextHop, and the ipRouteMetric1 followed by the ipRouteType. The ipRouteIfIndex is determined by the agent based on the ipRouteDest. The ipRouteMetric2, ipRouteMetric3 and ipRouteMetric4 are not used by the router and are set to zero. The ipRouteProto is set to local and rRtStatic is set to static. All ipRouteEntries manually defined are considered static and are not removed by the agent until specifically requested by the manager. If the ipRouteMetric1 is not provided, it's value defaults to 1. To remove an ipRouteEntry, the ipRouteType should be set to invalid. The INDEX value specified should correspond to the destination IP address of the desired entry.
                       rRtStatic 1.3.6.1.4.1.22.6.1.6.1.1 integer read-only
Defines an entry as static or dynamic. A static entry is one that has been entered manually by the network administrator and can be changed only by the network administrator. The routing protocols never overwrite a static entry. A dynamic entry is one created by the routing protocols and is updated by them as per standard definitions. Enumeration: 'static': 1, 'dynamic': 2.
               rRipTrInd 1.3.6.1.4.1.22.6.1.7 integer read-write
This flag indicates whether the rRipTrustTable is used to list trusted or not-trusted gateways. When the state is changed, all existing entries in the table are cleared. The default value is OFF. Setting this object to OFF causes the trust list to be removed and the router is returned to the default state of TRUST ALL. Enumeration: 'off': 2, 'trusted': 3, 'not-trusted': 4.
               rRipTrustTable 1.3.6.1.4.1.22.6.1.8 no-access
This table has 2 possible meanings depending on the value of rRipTrInd. These 2 configuration options allow the network administrator to limit RIP's scope for inbound processing. Outbound processing in not affected by this table. If rRipTrInd is set to TRUSTED, RIP listens only to the indicated gateways and no others. If rRipTrInd is set to NOT-TRUSTED, RIP does not listen to the indicated gateways but will accept updates from all other gateways. If the value of rRipTrInd is changed, this table is cleared. If the table is empty, it is assumed that all gateways are to be trusted or not-trusted depending on the value of rRipTrInd. The default for initialization is all gateways are trusted.
                   rRipTrustEntry 1.3.6.1.4.1.22.6.1.8.1 no-access
The list of fields needed to support the rRipTrustTable.
                       rTrRestGw 1.3.6.1.4.1.22.6.1.8.1.1 ipaddress read-write
The IP address of the gateway being restricted.
                       rTrRestState 1.3.6.1.4.1.22.6.1.8.1.2 integer read-write
The state of this entry. To add an entry to the list, set this field to ACTIVE. To remove an entry from the table, simply set this field to INACTIVE. Enumeration: 'active': 1, 'inactive': 2.
               rRipLsnIndTable 1.3.6.1.4.1.22.6.1.9 no-access
The rRipLsnIndTable contains the flags that indicate the type of listen restriction that is active for a given destination address.
                   rRipLsnIndEntry 1.3.6.1.4.1.22.6.1.9.1 no-access
The variables needed to maintain an entry in the rRipLsnIndTable.
                       rRipLsnIndDest 1.3.6.1.4.1.22.6.1.9.1.1 ipaddress read-write
The restricted destination address. For the LISTEN list this address will be the address of a gateway on a locally attached (sub)network. For the DO-NOT-LISTEN list this address will be a locally attached (sub)network.
                       rRipLsnType 1.3.6.1.4.1.22.6.1.9.1.2 integer read-write
Indicates whether the restricted list for this destination is a LISTEN list or a DO-NOT-LISTEN list. When the restriction indicator is changed, the associated LISTEN/DO-NOT-LISTEN list is removed. This field is the validation field to add/delete an entry in this table. Enumeration: 'off': 2, 'do-not-listen': 4, 'listen': 3.
               rRipLsnTable 1.3.6.1.4.1.22.6.1.10 no-access
Setting this table causes RIP to select inbound update information about a specific network or host. This table allows the network administrator to limit RIP's scope for inbound processing. Outbound processing is not affected by this table. If the rRipLsnType for this destination is set to LISTEN, RIP will use updates received from the specified gateways only. If the rRipLsnType is set to DO-NOT-LISTEN, RIP will discard updates received from the specified gateways and process all others. If the value of rRipLsnType is changed, this table is cleared. This table is maintained on a per destination basis. If the table is empty, it is assumed that all gateways are LISTEN for all destination addresses. This is also the default setting. To change the state of an entry in this table from LISTEN to DO-NOT-LISTEN or vice versa, change the rRipLsnType for the destination address and then define the new restriction list for that address.
                     rRipLsnEntry 1.3.6.1.4.1.22.6.1.10.1 no-access
The list of fields needed to support the rRipLsnTable.
                         rLsnAddr 1.3.6.1.4.1.22.6.1.10.1.1 ipaddress read-write
The destination address being restricted by this command.
                         rLsnRstAddr 1.3.6.1.4.1.22.6.1.10.1.2 ipaddress read-write
The IP address of the gateway/network being restricted.
                         rLsnRstState 1.3.6.1.4.1.22.6.1.10.1.3 integer read-write
The state of this entry. To remove an entry from the table, set this field to INACTIVE. To add an item to this table set the state to ACTIVE. However, please note that before entries be added to this list it must have a corresponding entry in the rRipLsnIndTable. Enumeration: 'active': 1, 'inactive': 2.
               rRipAnncIndTable 1.3.6.1.4.1.22.6.1.11 no-access
The rRipAnncIndTable contains the flags that indicate the type of announce restriction(s) that are active for each (sub)network supported by the unit. Please note that before any entries can be defined here or in the rRipAnncTable, the (sub)network must be defined to the router via an ipAddrEntry.
                     rRipAnncIndEntry 1.3.6.1.4.1.22.6.1.11.1 no-access
The variables needed to maintain an entry in the rRipAnncIndTable.
                         rRipAnncIndNet 1.3.6.1.4.1.22.6.1.11.1.1 ipaddress read-write
The IP address this unit recognizes on the (sub)network being restricted.
                         rRipAnncType 1.3.6.1.4.1.22.6.1.11.1.2 integer read-write
Indicates whether this (sub)network has an ANNOUNCE list, a DO-NOT-ANNOUNCE list or if the restriction is shut OFF. When the restriction indicator is changed, the associated ANNOUNCE/DO-NOT-ANNOUNCE list is removed. Enumeration: 'announce': 3, 'off': 2, 'do-not-announce': 4.
               rRipAnncTable 1.3.6.1.4.1.22.6.1.12 no-access
Setting this table causes RIP to taylor its update announcements. This table allows the network administrator to limit RIP's scope for outbound processing. Inbound processing is not affected by this table. If the rRipAnncType is set to ANNOUNCE, RIP will adjust its outbound announcments on the indicated (sub)network by propogating announcements for those gateways listed in the rRipAnncTable only. All announcements for gateways not on the ANNOUNCE list will not be sent over the associated (sub)network. If the rRipAnncType is set to DO-NOT-ANNOUNCE, RIP will adjust its outbound announcements on the indicated (sub)network by not propogating announcements for those gateways listed in the rRipAnncTable. All other announcements will be propogated on the indicated (sub)network. If the value of ripAnncType is changed, this table is cleared. This table is maintained on a per (sub)network basis. If the table is empty, it is assumed that all gateways on all (sub)networks are ANNOUNCE. This is also the default state. To change the state of an entry from ANNOUNCE to DO-NOT-ANNOUNCE or vice versa, change the rRipAnncType in the ripAnncIndTable for the (sub)network and then define the new restriction list for the (sub)network. Please note that before any entries can be defined here or in the rRipAnncIndTable, the (sub)network must be defined to the router via an ipAddrEntry.
                     rRipAnncEntry 1.3.6.1.4.1.22.6.1.12.1 no-access
The list of fields needed to support the rRipAnncTable.
                         rAnncNet 1.3.6.1.4.1.22.6.1.12.1.1 ipaddress read-write
The IP address this unit recognizes on the (sub)network being restricted.
                         rAnncDestAddr 1.3.6.1.4.1.22.6.1.12.1.2 ipaddress read-write
The IP address of the gateway being restricted.
                         rAnncRstState 1.3.6.1.4.1.22.6.1.12.1.3 integer read-write
The state of this entry. To remove an entry from the table, simply set this field to INACTIVE. Enumeration: 'active': 1, 'inactive': 2.
               rRipSrcTable 1.3.6.1.4.1.22.6.1.13 no-access
Setting this table causes RIP broadcasting to be shut off by indicating which gateways should receive directed RIP information. No broadcast RIP update massages will be sent on the specified network. This table allows the network administrator to limit RIP's scope for outbound processing. Inbound processing is not affected by this table. As stated above, this table is maintained on a per (sub)network basis. If the table is empty, it is assumed that all gateways are to receive updates, i.e. broadcast is turned on. The default is broadcast all updates on all (sub)networks. Please note that before any entries can be defined here, the (sub)network must be defined to the router via an ipAddrEntry.
                     rRipSrcEntry 1.3.6.1.4.1.22.6.1.13.1 no-access
The list of fields needed to support the rRipSrcTable.
                         rSrcAddr 1.3.6.1.4.1.22.6.1.13.1.1 ipaddress read-write
The IP address this unit recognizes on the (sub)network being restricted.
                         rSrcRstGw 1.3.6.1.4.1.22.6.1.13.1.2 ipaddress read-write
The IP address of the gateway being restricted.
                         rSrcRstState 1.3.6.1.4.1.22.6.1.13.1.3 integer read-write
The state of this entry. To remove an entry from the table, simply set this field to INACTIVE. Enumeration: 'active': 1, 'inactive': 2.
               rIpRtEvTable 1.3.6.1.4.1.22.6.1.14 no-access
Table containing the status of each routing event supported in the brouter.
                     rIpRtEvEntry 1.3.6.1.4.1.22.6.1.14.1 no-access
The entry containing the status of a specific routing event.
                         rRtEvTskId 1.3.6.1.4.1.22.6.1.14.1.1 integer read-only
The task id of the reporting entity.
                         rRtEvCode 1.3.6.1.4.1.22.6.1.14.1.2 integer read-only
The event id assigned to the specific routing event.
                         rRtEvStatus 1.3.6.1.4.1.22.6.1.14.1.3 integer read-write
Status of this routing event. Enumeration: 'on': 1, 'off': 2.
               rIpRipStats 1.3.6.1.4.1.22.6.1.15
                     rRipTotRef 1.3.6.1.4.1.22.6.1.15.1 counter read-only
Total number of RIP lookups.
                     rRipTotFnd 1.3.6.1.4.1.22.6.1.15.2 counter read-only
Number of times when routing destination was found.
                     rRipUdpRcv 1.3.6.1.4.1.22.6.1.15.3 counter read-only
Number of received RIP responses.
                     rRipUdpXmt 1.3.6.1.4.1.22.6.1.15.4 counter read-only
Number of transmitted RIP responses.
                     rRipUdpTrig 1.3.6.1.4.1.22.6.1.15.5 counter read-only
Total number of triggered RIP updates.
                     rRipReqRcv 1.3.6.1.4.1.22.6.1.15.6 counter read-only
Number of received RIP requests.
                     rRipReqXmt 1.3.6.1.4.1.22.6.1.15.7 counter read-only
Number of transmitted RIP requests.
                     rRipInvRcv 1.3.6.1.4.1.22.6.1.15.8 counter read-only
Number of invalid RIP messages received.
               rIpArpStats 1.3.6.1.4.1.22.6.1.16
                     rArpInMsgs 1.3.6.1.4.1.22.6.1.16.1 counter read-only
The total number of ARP messages which the entity received. Note that this counter includes all those counted by 'Inbound Errors'.
                     rArpInErr 1.3.6.1.4.1.22.6.1.16.2 counter read-only
The number of ARP messages which the entity received but determined as having errors (bad ARP opcode, bad protocol, bad hardware type).
                     rArpInIll 1.3.6.1.4.1.22.6.1.16.3 counter read-only
The number of illegal ARP messages received: Target Protocol Address (tpa) and Sender Protocol Address (spa) belongs to different networks, tpa, spa are illegal, tpa is broadcast etc.
                     rArpInOpCd 1.3.6.1.4.1.22.6.1.16.4 counter read-only
The number of ARP messages received, with bad opcode. Neither request nor reply.
                     rArpInReq 1.3.6.1.4.1.22.6.1.16.5 counter read-only
The number of ARP Request messages received.
                     rArpInRep 1.3.6.1.4.1.22.6.1.16.6 counter read-only
The number of ARP Reply messages received.
                     rArpInNotMe 1.3.6.1.4.1.22.6.1.16.7 counter read-only
The number of ARP Requests 'Not For Me messages' received.
                     rArpOutMsgs 1.3.6.1.4.1.22.6.1.16.8 counter read-only
The total number of ARP messages which this entity attempted to send. Note that this counter includes all those counted by 'Outbound Errors'.
                     rArpOutErr 1.3.6.1.4.1.22.6.1.16.9 counter read-only
The number of ARP messages which this entity did not send due to problems discovered within ARP such as a lack of buffers. This value should not include errors discovered outside the ARP layer such as the inability of the data link layer to send the message.
                     rArpOutReq 1.3.6.1.4.1.22.6.1.16.10 counter read-only
The number of ARP Request messages sent.
                     rArpOutRep 1.3.6.1.4.1.22.6.1.16.11 counter read-only
The number of ARP Reply messages sent.
                     rArpResReq 1.3.6.1.4.1.22.6.1.16.12 counter read-only
The number of resolve requests to this entity made by an upper level protocol.
               rIpPArp 1.3.6.1.4.1.22.6.1.17
                     rPArpInRep 1.3.6.1.4.1.22.6.1.17.1 counter read-only
The number of ARP replies recognized as a reply to a previous arp-request issued by proxy arp.
                     rPArpInReqSrch 1.3.6.1.4.1.22.6.1.17.2 counter read-only
The number of ARP requests recognized as 'naive request' that were put on the Proxy Search List.
                     rPArpOutReq 1.3.6.1.4.1.22.6.1.17.3 counter read-only
The number of ARP request sent on behalf of another host by proxy arp.
                     rPArpOutRep 1.3.6.1.4.1.22.6.1.17.4 counter read-only
The number of ARP replies sent by proxy arp, back to a naive host, as a result of passive proxy (the sought host was in the table).
                     rPArpOutActRep 1.3.6.1.4.1.22.6.1.17.5 counter read-only
The number of ARP replies sent by proxy arp, back to a naive host, as the result of an active proxy search.
                     rPArpToutSrch 1.3.6.1.4.1.22.6.1.17.6 counter read-only
The number of entries that were timed out from proxy arp search list (these entries got no reply during the proxy life-time interval).
                     rPArpNaiveReq 1.3.6.1.4.1.22.6.1.17.7 counter read-only
The number of ARP requests recognized as 'naive request' and to be handled by proxy arp mechanism. (A 'naive host' is a host with no subnetting knowledge.)
           propIpPerm 1.3.6.1.4.1.22.6.2
               pIpMaskTable 1.3.6.1.4.1.22.6.2.1 no-access
The permanent list of address masks used by this router to initialize it's rIpMaskTable.
                   pIpMaskEntry 1.3.6.1.4.1.22.6.2.1.1 no-access
Items contained in the permanent Address Mask Table.
                       pMaskNet 1.3.6.1.4.1.22.6.2.1.1.1 ipaddress read-write
The IP network this mask is defined for.
                       pMask 1.3.6.1.4.1.22.6.2.1.1.2 ipaddress read-write
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
                       pMaskState 1.3.6.1.4.1.22.6.2.1.1.3 integer read-write
The state of this entry. To remove an entry from the table, simply set this field to INACTIVE. Enumeration: 'active': 1, 'inactive': 2.
               pIpOurAddrTable 1.3.6.1.4.1.22.6.2.2 no-access
The permanent list of parameters used by this router to initialize its ipAddrTable as well as the extention table rIpOurAddrTable.
                   pIpOurAddrEntry 1.3.6.1.4.1.22.6.2.2.1 no-access
Objects required for a single entry in the pIpOurAddrTable. To add a pIpOurAddrEntry to the pIpOurAddrTable, the pAddrState is the validating item. Therefore, pAddrState must be the last item in the message when adding an entry. To add to the pIpOurAddrTable the agent requires all 7 items listed below. There are 3 default values provided by the agent for this entry: pAddrBcAddr defaults to -1, pAddrDbcast defaults to 'no directed broadcast' and pAddrRipMetric defaults to 1. To remove an pIpOurAddrEntry, the pAddrState should be set to INACTIVE.
                       pAddrOurAddr 1.3.6.1.4.1.22.6.2.2.1.1 ipaddress read-write
The IP Address being defined in this entry.
                       pAddrIfIndex 1.3.6.1.4.1.22.6.2.2.1.2 integer read-write
The interface this IP Address being defined on.
                       pAddrBcAddr 1.3.6.1.4.1.22.6.2.2.1.3 integer read-write
As defined in rfc1156. 'The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1.' The default value for this item is all-ones.
                       pAddrDbcast 1.3.6.1.4.1.22.6.2.2.1.4 integer read-write
Allows the user to set the directed broadcast parameter of an IP network. The default is 'no directed broadcast'.
                       pAddrRipMetric 1.3.6.1.4.1.22.6.2.2.1.5 integer read-write
A number from 1 to 15 used to calculate the metrics to given destinations, RIP will add this metric to metrics received from other RIP gateways on this (sub)network. In effect, this can be used to prioritize the (sub)network used for a destination reachable via more than one Brouter (sub)network. Default value is 1.
                       pAddrState 1.3.6.1.4.1.22.6.2.2.1.6 integer read-write
The state of this entry. To remove an entry from the table, simply set this field to INACTIVE. Enumeration: 'active': 1, 'inactive': 2.
                       pAddrRipState 1.3.6.1.4.1.22.6.2.2.1.7 integer read-write
The state of RIP for this entry. Enumeration: 'on': 1, 'off': 2, 'quiet': 3.
               pIpIfTable 1.3.6.1.4.1.22.6.2.3 no-access
The permanent list of parameters used by this router to initialize its ifTable as well as the extention table rIpIfTable.
                   pIpIfEntry 1.3.6.1.4.1.22.6.2.3.1 no-access
Objects required for a single entry in the pIpIfEntry.
                       pIfIndex 1.3.6.1.4.1.22.6.2.3.1.1 integer read-only
Interface ID that uniquely identifies this interface among all other interfaces in this brouter.
                       pIfType 1.3.6.1.4.1.22.6.2.3.1.2 integer read-write
Specifies the type of Physical and Data-Link layers. See rfc1156 for protocol codes.
                       pIfMtu 1.3.6.1.4.1.22.6.2.3.1.3 integer read-write
Maximum Transmission Unit size that is supported on this network. The largest value acceptable for Ethernet is 1500 and for FDDI is 4500.
                       pIfArpStat 1.3.6.1.4.1.22.6.2.3.1.4 integer read-write
Allows the user to turn ARP on and off for the interface. Enumeration: 'on': 1, 'off': 2.
                       pIfPArpStat 1.3.6.1.4.1.22.6.2.3.1.5 integer read-write
Allows the user to turn proxy ARP on and off for the interface. Enumeration: 'on': 1, 'off': 2.
                       pIfAdminStat 1.3.6.1.4.1.22.6.2.3.1.6 integer read-write
Specifies the desired initial state of the interface (i.e., should the interface be started without direction from the operator). See rfc1156 for state codes.
                       pIfBcMask 1.3.6.1.4.1.22.6.2.3.1.7 integer read-write
When set to ON, the brouter will broadcast its address mask on start up. When set to OFF, the brouter will not broadcast its address mask on start up. Enumeration: 'on': 1, 'off': 2.
               pDftGw 1.3.6.1.4.1.22.6.2.4 ipaddress read-write
The IP address of the permanent default gateway.
               pIpDefaults 1.3.6.1.4.1.22.6.2.5 integer read-write
When this object is set to 1, the side effect will be to cause the unit to reset all the objects defined under the subtree propIpPerm to their default values. Reading this object has no meaning. The integer value 1 will be returned to a get or get-next request. Enumeration: 'reset-defaults': 1.
       propFddi 1.3.6.1.4.1.22.7
           fddiSmtChge 1.3.6.1.4.1.22.7.1 integer read-only
At system startup, this object is set to FALSE. The SNMP agent then sets this flag to TRUE when any SMT object in the system is set by the manager. Enumeration: 'true': 1, 'false': 2.
           fddiMacChge 1.3.6.1.4.1.22.7.2 integer read-only
At system startup, this object is set to FALSE. The SNMP agent then sets this flag to TRUE when any MAC object in the system is set by the manager. Enumeration: 'true': 1, 'false': 2.
           fddiPortChge 1.3.6.1.4.1.22.7.3 integer read-only
At system startup, this object is set to FALSE. The SNMP agent then sets this flag to TRUE when any PORT object in the system is set by the manager. Enumeration: 'true': 1, 'false': 2.
           fddiAttachChge 1.3.6.1.4.1.22.7.4 integer read-only
At system startup, this object is set to FALSE. The SNMP agent then sets this flag to TRUE when any ATTACHMENT object in the system is set by the manager. Enumeration: 'true': 1, 'false': 2.