FASTPATH-ROUTING6-MIB: View SNMP OID List / Download MIB

VENDOR: DELL INC.


 Home MIB: FASTPATH-ROUTING6-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, BROADCOM-REF-MIB, SNMPv2-TC, IPV6-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fastPathRoutingIpv6 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30
The Broadcom Private MIB for FastPath Ipv6 Routing
       agentIpv6Group 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1
           agentIpv6RoutingMode 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.1 integer read-write
Administratively enables/disables ipv6 unicast routing on the switch. Enumeration: 'enable': 1, 'disable': 2.
           agentIpv6InterfaceTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2 no-access
               agentIpv6InterfaceEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2.1 no-access
                   agentIpv6InterfaceIfIndex 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2.1.1 integer32 read-only
The IfIndex associated with this instance.
                   agentIpv6InterfaceMtuValue 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2.1.2 unsigned32 read-write
Configures the MTU value for this interface.If it is not yet configured, retrieving the value of this object results in a zero value. Setting the value zero to this object effectively un-configures the MTU.
                   agentIpv6InterfaceDadTransmits 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2.1.3 integer32 read-write
Configures the dad transmits value for this interface.
                   agentIpv6InterfaceLinkLocalOnly 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2.1.4 integer read-write
When enabled, interface is capable of ipv6 operation without a global address. In this case, an eui-64 based link-local address is used. Enumeration: 'enable': 1, 'disable': 2.
                   agentIpv6InterfaceIcmpUnreachables 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.2.1.5 integer read-write
If this object is enable, it indicates that ICMPv6 unreachables can be sent on this interface. Enumeration: 'enable': 1, 'disable': 2.
           agentIpv6RouterAdvertisementTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3 no-access
There is no global administrative flag for router advertisement. The global routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing is disabled, router advertisement is disabled as well.
               agentIpv6RouterAdvertisementEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1 no-access
                   agentIpv6RouterAdvertisementIfIndex 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.1 integer32 read-only
Interface Number to configure Router Advertisement on.
                   agentIpv6RouterAdvertisementSuppressMode 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.2 integer read-write
Enable or disable router advertisement suppression on the interface. Enumeration: 'enable': 1, 'disable': 2.
                   agentIpv6RouterAdvertisementMaxAdvertisementInterval 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.3 integer32 read-write
Maximum time allowed between sending router advertisements from the interface.
                   agentIpv6RouterAdvertisementAdvertisementLifetime 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.4 integer32 read-write
Value of lifetime field of router advertisement sent from the interface. This value must be greater than or equal to agentIpv6RouterAdvertisementMaxAdvertisementInterval.
                   agentIpv6RouterAdvertisementNbrSolicitInterval 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.5 integer32 read-write
Value of retrans time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval.
                   agentIpv6RouterAdvertisementReachableTime 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.6 integer32 read-write
Value of reachable time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval.
                   agentIpv6RouterAdvertisementManagedFlag 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.7 integer read-write
Value of managed config field of router advertisement sent from the interface. Enumeration: 'enable': 1, 'disable': 2.
                   agentIpv6RouterAdvertisementOtherFlag 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.3.1.8 integer read-write
Value of other config field of router advertisement sent from the interface. Enumeration: 'enable': 1, 'disable': 2.
           agentIpv6AddrPrefixTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4 no-access
The list of IPv6 address prefixes of IPv6 interfaces.
               agentIpv6AddrPrefixEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1 no-access
An interface entry containing objects of a particular IPv6 address prefix.
                   agentIpv6AddrPrefix 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1.1 ipv6addressprefix no-access
The prefix associated with the this interface.
                   agentIpv6AddrPrefixLength 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1.2 integer no-access
The length of the prefix (in bits).
                   agentIpv6AddrPrefixOnLinkFlag 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1.3 truthvalue read-write
This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
                   agentIpv6AddrPrefixAutonomousFlag 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1.4 truthvalue read-write
Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoconfigure a local interface address.
                   agentIpv6AddrPrefixAdvPreferredLifetime 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1.5 unsigned32 read-write
It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.
                   agentIpv6AddrPrefixAdvValidLifetime 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.4.1.6 unsigned32 read-write
It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
           agentIpv6AddrTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.5 no-access
The table of addressing information relevant to this node's interface addresses.
               agentIpv6AddrEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.5.1 no-access
The addressing information for one of this node's interface addresses.
                   agentIpv6AddrAddress 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.5.1.1 ipv6address no-access
The IPv6 address to which this entry's addressing information pertains.
                   agentIpv6AddrPfxLength 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.5.1.2 integer read-only
The length of the prefix (in bits) associated with the IPv6 address of this entry.
                   agentIpv6AddrEui64Flag 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.5.1.3 truthvalue read-only
This object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise.
                   agentIpv6AddrStatus 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.5.1.4 rowstatus read-only
Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentIpv6NetMask object must be set during creation. destroy(6) - Removes the associated address from the interface.
           agentIpv6StaticRouteTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6 no-access
IPv6 Static Routing table. This table contains an entry for each valid IPv6 static unicast route that can be used for packet forwarding determination.
               agentIpv6StaticRouteEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1 no-access
A routing entry.
                   agentIpv6StaticRouteDest 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1.1 ipv6addressprefix no-access
The destination IPv6 address of this route. This object may not take a Multicast address value.
                   agentIpv6StaticRoutePfxLength 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1.2 integer no-access
Indicates the prefix length of the destination address.
                   agentIpv6StaticRouteIfIndex 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1.3 ipv6ifindexorzero no-access
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ipv6IfIndex. For routes with global address next hop this value can be zero.
                   agentIpv6StaticRouteNextHop 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1.4 ipv6address no-access
The address of the next system en route.
                   agentIpv6StaticRoutePreference 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1.5 integer read-only
The routing preference metric for this route. A lower value is more preferred.
                   agentIpv6StaticRouteStatus 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.6.1.6 rowstatus read-only
Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated route from the interface.
           agentIpv6ServicePortGroup 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7
               agentIpv6ServicePortPrefixTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.1 no-access
IPv6 Service Port Prefix Table. This table contains an entry for each valid IPv6 prefix configured on the Service Port.
                   agentIpv6ServicePortPrefixEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.1.1 no-access
An IPv6 Service Port Prefix entry.
                       agentIpv6ServicePortPrefixIndex 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.1.1.1 unsigned32 no-access
The index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values to be reassigned.
                       agentIpv6ServicePortPrefix 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.1.1.2 ipv6address read-only
The Ipv6 Prefix Address configured on the Service Port.
                       agentIpv6ServicePortPrefixLength 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.1.1.3 unsigned32 read-only
The length of the IPv6 Prefix Address.
               agentIpv6ServicePortDefaultRouterTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.2 no-access
IPv6 Service Port Default Router Table. This table contains an entry for each valid IPv6 Default Router configured on the Service Port.
                   agentIpv6ServicePortDefaultRouterEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.2.1 no-access
An IPv6 Service Port Default Router entry.
                       agentIpv6ServicePortDefaultRouterIndex 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.2.1.1 unsigned32 no-access
The index of the IPv6 Default Router Address configured on the Service Port. Removal of a row will cause index values to be reassigned.
                       agentIpv6ServicePortDefaultRouter 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.2.1.2 ipv6address read-only
The Address of the IPv6 Default Router configured on the Service Port.
               agentIpv6ServicePortNbrTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3 no-access
IPv6 Service Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Service Port.
                   agentIpv6ServicePortNbrEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3.1 no-access
An IPv6 Service Port Neighbor entry.
                       agentIpv6ServicePortNbrAddr 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3.1.1 ipv6address no-access
The Ipv6 Address of a neighbor switch visible to the Service Port.
                       agentIpv6ServicePortNbrPhysAddr 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3.1.2 macaddress read-only
The MacAddress of the neighboring switch.
                       agentIpv6ServicePortNbrState 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3.1.3 integer read-only
The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status. Enumeration: 'delay': 3, 'unknown': 6, 'stale': 2, 'probe': 4, 'reachable': 1.
                       agentIpv6ServicePortNbrUpdated 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3.1.4 timestamp read-only
The last sysUpTime that this neighbor has been updated.
                       agentIpv6ServicePortNbrIsRouter 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.7.3.1.5 truthvalue read-only
Returns true(1) if the neighbor machine is a router, false(2) otherwise.
           agentIpv6IcmpControlGroup 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.8
               agentIpv6IcmpRateLimitInterval 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.8.1 integer32 read-write
Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit.
               agentIpv6IcmpRateLimitBurstSize 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.30.1.8.2 integer32 read-write
Specifies the number of tokens to be placed after timeout.