F3-PBB-MIB: View SNMP OID List / Download MIB

VENDOR: ADVA AG OPTICAL NETWORKING


 Home MIB: F3-PBB-MIB
Download as:   
SNMPv2-CONF, CM-FACILITY-MIB, CM-IP-MIB, CM-PERFORMANCE-MIB, CM-COMMON-MIB, ADVA-MIB, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 f3PBBMIB 1.3.6.1.4.1.2544.1.12.21
This module defines the Facility MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
       f3PBBConfigObjects 1.3.6.1.4.1.2544.1.12.21.1
           f3PbbEthernetAccPortTable 1.3.6.1.4.1.2544.1.12.21.1.1 no-access
A list of entries corresponding to PBB function on the net port
               f3PbbEthernetAccPortEntry 1.3.6.1.4.1.2544.1.12.21.1.1.1 no-access
A conceptual row in the f3PbbEthernetAccPortTable.
                   f3PbbEthernetAccPortITagLoopbackMask 1.3.6.1.4.1.2544.1.12.21.1.1.1.1 integer read-write
This object allows to specify which itag loopback has been enabled. 1: Itag 1 loopback enabled, 2: Itag 2 loopback enabled, 4: Itag 4 loopback enabled.
                   f3PbbEthernetAccPortITagLoopback1 1.3.6.1.4.1.2544.1.12.21.1.1.1.2 displaystring read-write
This object allows specification of the Itag 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
                   f3PbbEthernetAccPortITagLoopback2 1.3.6.1.4.1.2544.1.12.21.1.1.1.3 displaystring read-write
This object allows specification of the Itag 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
                   f3PbbEthernetAccPortITagLoopback3 1.3.6.1.4.1.2544.1.12.21.1.1.1.4 displaystring read-write
This object allows specification of the Itag 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
           f3PbbEthernetNetPortTable 1.3.6.1.4.1.2544.1.12.21.1.2 no-access
A list of entries corresponding to PBB function on the net port
               f3PbbEthernetNetPortEntry 1.3.6.1.4.1.2544.1.12.21.1.2.1 no-access
A conceptual row in the f3PbbEthernetNetPortTable.
                   f3PbbEthernetNetPortBackboneMacAddress 1.3.6.1.4.1.2544.1.12.21.1.2.1.1 macaddress read-write
This object is mac address of backbone network port.
                   f3PbbEthernetNetPortITagLoopbackMask 1.3.6.1.4.1.2544.1.12.21.1.2.1.2 integer read-write
This object allows to specify which itag loopback has been enabled. 1: Itag 1 loopback enabled, 2: Itag 2 loopback enabled, 4: Itag 4 loopback enabled.
                   f3PbbEthernetNetPortITagLoopback1 1.3.6.1.4.1.2544.1.12.21.1.2.1.3 displaystring read-write
This object allows specification of the Itag 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
                   f3PbbEthernetNetPortITagLoopback2 1.3.6.1.4.1.2544.1.12.21.1.2.1.4 displaystring read-write
This object allows specification of the Itag 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
                   f3PbbEthernetNetPortITagLoopback3 1.3.6.1.4.1.2544.1.12.21.1.2.1.5 displaystring read-write
This object allows specification of the Itag 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
           f3PbbFlowTable 1.3.6.1.4.1.2544.1.12.21.1.3 no-access
A list of entries corresponding to PBB function on the flow
               f3PbbFlowEntry 1.3.6.1.4.1.2544.1.12.21.1.3.1 no-access
A conceptual row in the f3PbbFlowTable.
                   f3PbbFlowITagControl 1.3.6.1.4.1.2544.1.12.21.1.3.1.1 flowtagcontrol read-write
This object allows specification of the tag management operation on the I-TAG. Supported types are 'none', 'push', and 'pushisid'. and it must be none while ctagcontrol or stagcontrol is not none.
                   f3PbbFlowITagISID 1.3.6.1.4.1.2544.1.12.21.1.3.1.2 integer32 read-write
This object is used to specify the ITagISID. Its rang from 256 to 16777214.
                   f3PbbFlowITagPriority 1.3.6.1.4.1.2544.1.12.21.1.3.1.3 integer32 read-write
This object is used to specify the priority of ITag. Its rang from 0 to 7.
                   f3PbbFlowBackboneMacDestinationEnabled 1.3.6.1.4.1.2544.1.12.21.1.3.1.4 truthvalue read-write
This object indicates whether can assign BMAC value. When enabled, user can assign a unicast BMAC as B_DA for this EVC When disabled, 01-1E-83- will be used as B-DA.
                   f3PbbFlowBackboneMacDestinationAddress 1.3.6.1.4.1.2544.1.12.21.1.3.1.5 macaddress read-write
Customer can configure the backbone MAC destination address, the default value is 01-1E-83-.
                   f3PbbFlowA2NPbbCapableFlag 1.3.6.1.4.1.2544.1.12.21.1.3.1.6 truthvalue read-write
When it is false, Drop PBB frames in the A2N direction (FPGA function), Allow to PUSH I-TAG on this flow; When A2NPbbCapableFlag is TRUE, Pass PBB frames in the A2N direction (FPGA function), Software allow PUSH I-TAG on this flow(normal) will not allow to PUSH S-TAG on this flow, will not allow to PUSH C-TAG on this flow, Software will allow to PUSH C-TAG/S-TAG on this flow.
           f3PbbIpManagementTunnelTable 1.3.6.1.4.1.2544.1.12.21.1.4 no-access
A list of entries corresponding to PBB function on the mngt tunnel
               f3PbbIpManagementTunnelEntry 1.3.6.1.4.1.2544.1.12.21.1.4.1 no-access
A conceptual row in the f3PbbIpManagementTunnelTable.
                   f3PbbIpManagementTunnelItagEnabled 1.3.6.1.4.1.2544.1.12.21.1.4.1.1 truthvalue read-write
This object ITAG whether enabled, It is Enabled only When management tunnel type is ISID based. By default it is disabled
                   f3PbbIpManagementTunnelISID 1.3.6.1.4.1.2544.1.12.21.1.4.1.2 integer32 read-write
Only applicable when iTagEnabled = enabled (ISID is shown to user, but in IFM data type here is ITAG).
                   f3PbbIpManagementTunnelIPriority 1.3.6.1.4.1.2544.1.12.21.1.4.1.3 integer32 read-write
Only applicable when iTagEnabled = enabled (ISID is shown to user, but in IFM data type here is ITAG, no use at present).
                   f3PbbIpManagementTunnelBackboneMacDestinationEnabled 1.3.6.1.4.1.2544.1.12.21.1.4.1.4 truthvalue read-write
When enabled, we will use provisioned B-MAC for ARP and for management packets. When disabled, we will use backbone group MAC address for ARP and get B-DA from ARP response By default, it is disabled
                   f3PbbIpManagementTunnelBackboneMacDestinationAddress 1.3.6.1.4.1.2544.1.12.21.1.4.1.5 macaddress read-write
User must set a valid MAC address, Only applicable when iTagEnabled = enabled By default, it is 00:00:00:00:00:00
       f3PBBPerformanceObjects 1.3.6.1.4.1.2544.1.12.21.2
           f3PbbEthernetNetPortStatsTable 1.3.6.1.4.1.2544.1.12.21.2.1 no-access
A collection of pbb Ethernet Network Port related statistics. These reflect the current data.
               f3PbbEthernetNetPortStatsEntry 1.3.6.1.4.1.2544.1.12.21.2.1.1 no-access
A conceptual row in the f3PbbEthernetNetPortStatsTable. Entries exist in this table for each Ethernet interface/port.
                   f3PbbEthernetNetPortStatsPbbUniBdaDiscard 1.3.6.1.4.1.2544.1.12.21.2.1.1.1 perfcounter64 read-only
Number of PBB frames (BDA is not backbone group MAC) discarded due to receive BDA which is not matching the port's PBB MAC address when port is non-promiscuous mode.
                   f3PbbEthernetNetPortStatsPbbGroupBdaDiscard 1.3.6.1.4.1.2544.1.12.21.2.1.1.2 perfcounter64 read-only
Number of PBB frames discarded due to mismatch of I-SID in I-TAG and I-SID in backbone group MAC in the B-DA when port is non-promiscuous mode.
           f3PbbEthernetNetPortHistoryStatsTable 1.3.6.1.4.1.2544.1.12.21.2.2 no-access
A collection of pbb Ethernet Network Port related statistics. These reflect the current data.
               f3PbbEthernetNetPortHistoryStatsEntry 1.3.6.1.4.1.2544.1.12.21.2.2.1 no-access
A conceptual row in the f3PbbEthernetNetPortHistoryStatsTable. Entries exist in this table for each Ethernet interface/port.
                   f3PbbEthernetNetPortHistoryStatsPbbUniBdaDiscard 1.3.6.1.4.1.2544.1.12.21.2.2.1.1 perfcounter64 read-only
Number of PBB frames (BDA is not backbone group MAC) discarded due to receive BDA which is not matching the port's PBB MAC address when port is non-promiscuous mode.
                   f3PbbEthernetNetPortHistoryStatsPbbGroupBdaDiscard 1.3.6.1.4.1.2544.1.12.21.2.2.1.2 perfcounter64 read-only
Number of PBB frames discarded due to mismatch of I-SID in I-TAG and I-SID in backbone group MAC in the B-DA when port is non-promiscuous mode.
       f3PBBConformance 1.3.6.1.4.1.2544.1.12.21.3
           f3PBBCompliances 1.3.6.1.4.1.2544.1.12.21.3.1
               f3PBBCompliance 1.3.6.1.4.1.2544.1.12.21.3.1.1
Describes the requirements for conformance to the PBB Object group.
           f3PBBGroups 1.3.6.1.4.1.2544.1.12.21.3.2
               f3PbbConfigGroup 1.3.6.1.4.1.2544.1.12.21.3.2.1
A collection of objects used to manage the F3 PBB Functionality .
               f3PbbStatsGroup 1.3.6.1.4.1.2544.1.12.21.3.2.2
A collection of objects used to manage the F3 PBB Functionality .