F3-LAG-MIB: View SNMP OID List / Download MIB

VENDOR: ADVA AG OPTICAL NETWORKING


 Home MIB: F3-LAG-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 f3LagMIB 1.3.6.1.4.1.2544.1.12.14
This module defines the vendor specific 802.3ad LAG MIB definitions used by the FSP150CM 5.1 product lines, as extensions to the standard IEEE 802.3ad (802.3-2005). Copyright (C) ADVA Optical Networking.
       f3LagObjects 1.3.6.1.4.1.2544.1.12.14.1
           f3LagTable 1.3.6.1.4.1.2544.1.12.14.1.1 no-access
A list of entries corresponding to the Link Aggregation Groups. Entries can be created/deleted in this table by management application action.
               f3LagEntry 1.3.6.1.4.1.2544.1.12.14.1.1.1 no-access
An entry containing information applicable to a particular security user.
                   f3LagIndex 1.3.6.1.4.1.2544.1.12.14.1.1.1.1 integer32 no-access
An integer index value used to uniquely identify this Lag. It should be the Lag Logical index.
                   f3LagIfIndex 1.3.6.1.4.1.2544.1.12.14.1.1.1.2 interfaceindex read-only
This object has the same value as ifIndex for LAG logical Port. An integer index value used to uniquely identify this LAG logical Port.
                   f3LagName 1.3.6.1.4.1.2544.1.12.14.1.1.1.3 displaystring read-write
This object allows SNMP management entities to name the LAG aggregator.
                   f3LagProtocols 1.3.6.1.4.1.2544.1.12.14.1.1.1.4 truthvalue read-write
When this object is enabled, the LACP will run as 802.3ad defines; When this object is disabled, LACP/LAMP protocols will not run and the LAG member port is fixed to an assigned LAG aggregator.
                   f3LagLacpControl 1.3.6.1.4.1.2544.1.12.14.1.1.1.5 truthvalue read-write
Determines whether or not the Link Aggregation Control Protocol is enabled or disabled for the LAG. When disabled, the LAG shall ignore LACP frames for the purpose of selecting the active link (port) and shall select its active link (port) solely upon the status of the LAG member links (ports). However, when disabled, the LACP protocol shall remain active (i.e. LACP frames are transmitted when needed, etc.).
                   f3LagMode 1.3.6.1.4.1.2544.1.12.14.1.1.1.6 aggmode read-write
Defines the LAG behavior. A LAG with mode active-standby - exhibits 1:1 protection behavior loadsharing - exhibits port aggregation behavior An active-standby LAG supports 0-2 member ports. One member is in Active role while the other is in Standby role. A loadsharing LAG can have multiple (0-x) member ports, where x is as follows. x = 2 for GE112Pro, GE114Pro, GE206V (Network ports only) x = 2 for XG210 Network ports, x = 10 for XG210 Access ports x = 4 for XG116Pro, XG120Pro (10G ports) x = 6 for XG116Pro GE ports x = 10 for XG120Pro GE ports In CM Aggregation Shelf, the loadsharing LAG can have 2-8 member ports.
                   f3LagCcmDefectsDetectionEnabled 1.3.6.1.4.1.2544.1.12.14.1.1.1.7 truthvalue read-write
This object allows for a LAG to use CCM defects DefRemoteCCM and DefRDICCM as an indication of Signal Fail for the LAG member ports. When enabled, a LAG member will stop carrying service frames when a DefRemoteCCM or DefRDICCM is detected on a port level CFM DOWN MEP associated with the LAG member port. Please note that port level CFM DOWN MEPs need to be created on LAG member ports for this feature to work.
                   f3LagStatsAction 1.3.6.1.4.1.2544.1.12.14.1.1.1.8 cmpmbinaction read-write
Allows the Manager to clear the LAG level statistics (f3LagStatsTable).
                   f3LagStorageType 1.3.6.1.4.1.2544.1.12.14.1.1.1.9 storagetype read-only
The type of storage configured for this entry.
                   f3LagRowStatus 1.3.6.1.4.1.2544.1.12.14.1.1.1.10 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3LagRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3LagRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3LagRowStatus object may be modified if the associated instance of this object is equal to active(1).
                   f3LagIgnorePartnerColMaxDelay 1.3.6.1.4.1.2544.1.12.14.1.1.1.11 truthvalue read-only
This object is used to configure LAG instance to ignore Collector Max Delay value in the received LACP PDU. Setting this value to TRUE will result in no hold-off timer to be started, regardless of the received Collector Max Delay value.
                   f3LagFrameDistAlgorithm 1.3.6.1.4.1.2544.1.12.14.1.1.1.12 lagframedistributionalgorithmtype read-write
The frame distribution algorithm used by the LAG for transmitting frames on the individual LAG member ports. For an active-standby LAG, this will be active-standby. A loadsharing LAG will follow service-assignment frame distribution. The srcdst-mac-hash method is not supported on CC-NIDS.
                   f3LagDiscardWrongConversation 1.3.6.1.4.1.2544.1.12.14.1.1.1.13 truthvalue read-write
This object is used to control and identify whether frames received on a LAG member port are to be discarded if the service associated with the frame (ingress membership) does not match the service-to-link mapping of the LAG Service Map.
           f3LagStatsTable 1.3.6.1.4.1.2544.1.12.14.1.2 no-access
A list of entries corresponding to the LAG statistics. Entries cannot be created in this table by management application action.
               f3LagStatsEntry 1.3.6.1.4.1.2544.1.12.14.1.2.1 no-access
An entry containing information on the LAG logical port statistics.
                   f3LagStatsIndex 1.3.6.1.4.1.2544.1.12.14.1.2.1.1 integer32 no-access
The unique identifier to access a unique row in the f3LagStatsTable.
                   f3LagStatsOctetsTxOK 1.3.6.1.4.1.2544.1.12.14.1.2.1.2 counter32 read-only
A count of the data and padding octets transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation.
                   f3LagStatsOctetsRxOK 1.3.6.1.4.1.2544.1.12.14.1.2.1.3 counter32 read-only
A count of the data and padding octets received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation.
                   f3LagStatsFramesTxOK 1.3.6.1.4.1.2544.1.12.14.1.2.1.4 counter32 read-only
A count of the data frames transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation.
                   f3LagStatsFramesRxOK 1.3.6.1.4.1.2544.1.12.14.1.2.1.5 counter32 read-only
A count of the data frames received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation.
                   f3LagStatsMulticastFramesTxOK 1.3.6.1.4.1.2544.1.12.14.1.2.1.6 counter32 read-only
A count of the data frames transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation, to a group destination address other than the broadcast address.
                   f3LagStatsMulticastFramesRxOK 1.3.6.1.4.1.2544.1.12.14.1.2.1.7 counter32 read-only
A count of the data frames received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation, that were addressed to an active group address other than the broadcast address.
                   f3LagStatsBroadcastFramesTxOK 1.3.6.1.4.1.2544.1.12.14.1.2.1.8 counter32 read-only
A count of the broadcast data frames transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation.
                   f3LagStatsBroadcastFramesRxOK 1.3.6.1.4.1.2544.1.12.14.1.2.1.9 counter32 read-only
A count of the broadcast data frames received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation.
                   f3LagStatsFramesWithTxErrors 1.3.6.1.4.1.2544.1.12.14.1.2.1.10 counter32 read-only
A count of data frames requested to be transmitted by this Aggregator that experienced transmission errors on ports that are (or have been) members of the aggregation.
                   f3LagStatsFramesWithRxErrors 1.3.6.1.4.1.2544.1.12.14.1.2.1.11 counter32 read-only
A count of data frames discarded on reception by all ports that are (or have been) members of the aggregation, or that were discarded by the Collection function of the Aggregator, or that were discarded by the Aggregator due to the detection of an illegal Slow Protocols PDU.
                   f3LagStatsUnknownProtocolFrames 1.3.6.1.4.1.2544.1.12.14.1.2.1.12 counter32 read-only
A count of data frames discarded on reception by all ports that are (or have been) members of the aggregation, due to the detection of an unknown Slow Protocols PDU.
           f3LagPortTable 1.3.6.1.4.1.2544.1.12.14.1.3 no-access
A list of entries corresponding to the LAG member ports. Entries can be created/deleted in this table by management application action.
               f3LagPortEntry 1.3.6.1.4.1.2544.1.12.14.1.3.1 no-access
An entry containing information applicable to a particular security user.
                   f3LagPortIndex 1.3.6.1.4.1.2544.1.12.14.1.3.1.1 integer32 no-access
The unique identifier for each Aggregation Port.
                   f3LagPortMember 1.3.6.1.4.1.2544.1.12.14.1.3.1.2 variablepointer read-only
This is the OID of the LAG member port.
                   f3LagPortLacpForceOutOfSync 1.3.6.1.4.1.2544.1.12.14.1.3.1.3 truthvalue read-write
A boolean value which enables or disables the port from participating as an active port in the Link Aggregation Group, causing the link (port) to transmit OUT_OF_SYNC via LACP.
                   f3LagPortState 1.3.6.1.4.1.2544.1.12.14.1.3.1.4 aggportstate read-only
This object can be used to show the current status of the member port. Active: the member port is ready for transporting and is in working now. Standby: the member port is ready for transporting, but is not working now.
                   f3LagPortStatsAction 1.3.6.1.4.1.2544.1.12.14.1.3.1.5 cmpmbinaction read-write
Allows the Manager to clear the LAG Port level statistics (dot3adAggPortStatsTable).
                   f3LagPortStorageType 1.3.6.1.4.1.2544.1.12.14.1.3.1.6 storagetype read-only
The type of storage configured for this entry.
                   f3LagPortRowStatus 1.3.6.1.4.1.2544.1.12.14.1.3.1.7 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3LagPortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3LagPortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3LagPortRowStatus object may be modified if the associated instance of this object is equal to active(1).
           f3LagServiceMapTable 1.3.6.1.4.1.2544.1.12.14.1.4 no-access
A list of entries corresponding to the LAG service map entry. Entries can be created/deleted in this table by management application action.
               f3LagServiceMapEntry 1.3.6.1.4.1.2544.1.12.14.1.4.1 no-access
An entry containing information applicable to a particular security user.
                   f3LagServiceMapIndex 1.3.6.1.4.1.2544.1.12.14.1.4.1.1 integer32 no-access
The unique identifier for each entry/row in the Service Map.
                   f3LagServiceMapServiceObj 1.3.6.1.4.1.2544.1.12.14.1.4.1.2 variablepointer read-only
This is the OID of the LAG service object.
                   f3LagServiceMapLinkAssignMode 1.3.6.1.4.1.2544.1.12.14.1.4.1.3 linkassignmode read-write
The assign mode value.
                   f3LagServiceMapStorageType 1.3.6.1.4.1.2544.1.12.14.1.4.1.4 storagetype read-only
The type of storage configured for this entry.
                   f3LagServiceMapRowStatus 1.3.6.1.4.1.2544.1.12.14.1.4.1.5 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3LagServiceMapRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3LagServiceMapRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3LagServiceMapRowStatus object may be modified if the associated instance of this object is equal to active(1).
                   f3LagServiceMapMemberLinkList 1.3.6.1.4.1.2544.1.12.14.1.4.1.6 displaystring read-write
The member link list value, describe by ifindex value string split with comma.
                   f3LagServiceMapCurrentMemberLink 1.3.6.1.4.1.2544.1.12.14.1.4.1.7 integer32 read-only
The current member link ifindex value.
       f3LagConformance 1.3.6.1.4.1.2544.1.12.14.2
           f3LagCompliances 1.3.6.1.4.1.2544.1.12.14.2.1
               f3LagCompliance 1.3.6.1.4.1.2544.1.12.14.2.1.1
Describes the requirements for conformance to the f3Lag group.
           f3LagGroups 1.3.6.1.4.1.2544.1.12.14.2.2
               f3LagObjectGroup 1.3.6.1.4.1.2544.1.12.14.2.2.1
A collection of objects used to manage the f3Lag group.