F10-IF-EXTENSION-MIB: View SNMP OID List / Download MIB

VENDOR: FORCE10 NETWORKS


 Home MIB: F10-IF-EXTENSION-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, FORCE10-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 f10IfExtensionMib 1.3.6.1.4.1.6027.3.11
Dell Networking OS IF Extenstion MIB.
       f10IfExtensionMibObject 1.3.6.1.4.1.6027.3.11.1
           f10IfExtensionParams 1.3.6.1.4.1.6027.3.11.1.1
               f10IfTable 1.3.6.1.4.1.6027.3.11.1.1.1 no-access
Dell Networking OS Extension ifTable contains generic interface parameters.
                   f10IfEntry 1.3.6.1.4.1.6027.3.11.1.1.1.1 no-access
A row defintion of Dell Networking OS Interface Extension parameters.
                       f10IfIpMtu 1.3.6.1.4.1.6027.3.11.1.1.1.1.1 unsigned32 read-write
The IP (Internet Protocol), Maximum Transmission Unit value.
                       f10IfDuplexMode 1.3.6.1.4.1.6027.3.11.1.1.1.1.2 integer read-write
Duplex mode of the interface. This will be read-write only for s60 Enumeration: 'auto': 3, 'full': 2, 'half': 1.
                       f10IfQueueingStrategy 1.3.6.1.4.1.6027.3.11.1.1.1.1.3 displaystring read-only
Queueing strategy used for packets.
                       f10IfRxFlowCtrl 1.3.6.1.4.1.6027.3.11.1.1.1.1.4 truthvalue read-write
Flow control receive. This will be read-write only for s60
                       f10IfTxFlowCtrl 1.3.6.1.4.1.6027.3.11.1.1.1.1.5 truthvalue read-write
Flow Control transmit.This will be read-only only for s60
                       f10IfDescr 1.3.6.1.4.1.6027.3.11.1.1.1.1.6 octet string read-write
A textual string containing information about the interface. This will be read-write only for s60
                       f10IfAdminStatus 1.3.6.1.4.1.6027.3.11.1.1.1.1.7 integer read-write
A admin status of any interface. This will be read-write only for s60 Enumeration: 'down': 2, 'up': 1.
                       f10IfRateInterval 1.3.6.1.4.1.6027.3.11.1.1.1.1.8 unsigned32 read-write
The rate info interval for the interface. This will be read-write only for s60
                       f10IfSpeed 1.3.6.1.4.1.6027.3.11.1.1.1.1.9 integer read-write
The interface's current bandwidth in bits per second. This will be read-write only for s60 Enumeration: 'tenMbps': 10, 'auto': 1, 'thousandMbps': 1000, 'hundredMbps': 100.
                       f10IfPortListBitPos 1.3.6.1.4.1.6027.3.11.1.1.1.1.10 integer32 read-only
This is used for identifying the bit position in PortList Object for a given interface.
           f10IfExtensionStats 1.3.6.1.4.1.6027.3.11.1.2
               f10IfStaticsTable 1.3.6.1.4.1.6027.3.11.1.2.1 no-access
The statistcs information of the interfaces for performance monitoring.
                   f10IfStaticsEntry 1.3.6.1.4.1.6027.3.11.1.2.1.1 no-access
A row defintion of Dell Networking OS Extension interface statistics.
                       f10IfInVlanPkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.1 counter64 read-only
The total number of valid VLAN Tagged frames received.
                       f10IfIn64BytePkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.2 counter64 read-only
The total number of frames (including bad frames) received that were 64 octets in length (excluding framing bits but in-cluding FCS octets).
                       f10ifIn65To127BytePkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.3 counter64 read-only
The total number of frames (including bad frames) received that were between 65 and 127 octets in length inclusive (ex-cluding framing bits but including FCS octets).
                       f10IfIn128To255BytePkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.4 counter64 read-only
The total number of frames (including bad frames) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                       f10IfIn256To511BytePkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.5 counter64 read-only
The total number of frames (including bad frames) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                       f10IfIn512To1023BytePkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.6 counter64 read-only
The total number of frames (including bad frames) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                       f10IfInOver1023BytePkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.7 counter64 read-only
The total number of frames received that were longer than 1023 (1025 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This counter is not incremented for too long frames.
                       f10IfInThrottles 1.3.6.1.4.1.6027.3.11.1.2.1.1.8 counter64 read-only
This counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is re-ceived.
                       f10IfInRunts 1.3.6.1.4.1.6027.3.11.1.2.1.1.9 counter64 read-only
The total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       f10IfInGiants 1.3.6.1.4.1.6027.3.11.1.2.1.1.10 counter64 read-only
The total number of frames received that were longer than 1518 (1522 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This counter is not incremented for too long frames.
                       f10IfInCRC 1.3.6.1.4.1.6027.3.11.1.2.1.1.11 counter64 read-only
The total number of frames received that had a length (ex-cluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad CRC.
                       f10IfInOverruns 1.3.6.1.4.1.6027.3.11.1.2.1.1.12 counter64 read-only
The total number of frames dropped because of buffer issue.
                       f10IfOutVlanPkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.13 counter64 read-only
The Number of Good VLAN Tagged Frames sent successfully.
                       f10IfOutUnderruns 1.3.6.1.4.1.6027.3.11.1.2.1.1.14 counter64 read-only
The total number of frames dropped because of buffer underrun.
                       f10IfOutUnicasts 1.3.6.1.4.1.6027.3.11.1.2.1.1.15 counter64 read-only
The Number of Good Unicast Frames sent successfully.
                       f10IfOutCollisions 1.3.6.1.4.1.6027.3.11.1.2.1.1.16 counter64 read-only
A count of the frames that due to excessive or late collisions are not transmitted successfully.
                       f10IfOutWredDrops 1.3.6.1.4.1.6027.3.11.1.2.1.1.17 counter64 read-only
A count of the frames that are dropped using WRED policy because of to excessive traffic.
                       f10IfOut64BytePkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.18 counter64 read-only
The Number of Good Frames sent successfully whose size was 64 Bytes.
                       f10IfOut65To127BytePkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.19 counter64 read-only
The Number of Good Frames sent successfully whose size was in the range of 65 to 127 Bytes.
                       f10IfOut128To255BytePkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.20 counter64 read-only
The Number of Good Frames sent successfully whose size was in the range of 128 to 255 Bytes.
                       f10IfOut256To511BytePkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.21 counter64 read-only
The Number of Good Frames sent successfully whose size was in the range of 256 to 511 Bytes.
                       f10IfOut512To1023BytePkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.22 counter64 read-only
The Number of Good Frames sent successfully whose size was in the range of 512 to 1023 Bytes.
                       f10IfOutOver1023BytePkts 1.3.6.1.4.1.6027.3.11.1.2.1.1.23 counter64 read-only
The Number of Good Frames sent successfully whose size was greater than 1023 Bytes.
                       f10IfOutThrottles 1.3.6.1.4.1.6027.3.11.1.2.1.1.24 counter64 read-only
This counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is sent.
                       f10IfLastDiscontinuityTime 1.3.6.1.4.1.6027.3.11.1.2.1.1.25 timestamp read-only
The value of sysUpTime on the most recent occasion at which this interface's counters suffered a discontinuity via a reset. If no such discontinuities have occurred since the last reinitialization of the local management subsystem, then this object contains a zero value.
                       f10IfInCentRate 1.3.6.1.4.1.6027.3.11.1.2.1.1.26 integer32 read-only
This is the ingress rate in percentage. This is an integer value which can go from 0 to 100.
                       f10IfOutCentRate 1.3.6.1.4.1.6027.3.11.1.2.1.1.27 integer32 read-only
This is the egress rate in percentage. This is an integer value which can go from 0 to 100.
       f10IfExtensionMibConformance 1.3.6.1.4.1.6027.3.11.2
           f10IfExtensionMibCompliances 1.3.6.1.4.1.6027.3.11.2.1
               f10IfExtensionMibCompliance 1.3.6.1.4.1.6027.3.11.2.1.1
The compliance statement for Dell Networking OS IF Extension MIB.
           f10IfExtensionMibGroups 1.3.6.1.4.1.6027.3.11.2.2
               f10IfParamsGroup 1.3.6.1.4.1.6027.3.11.2.2.1
A collection of objects providing the Dell Networking OS IF Extenstion parameters.
               f10IfStatsGroup 1.3.6.1.4.1.6027.3.11.2.2.2
A collection of objects providing the interface statistics.