EtherWAN-ewnSwitchM: View SNMP OID List / Download MIB
VENDOR: ETHERWAN SYSTEMS
| Home | MIB: EtherWAN-ewnSwitchM | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| etherwan | 1.3.6.1.4.1.2736 | |||
| lanSwitch | 1.3.6.1.4.1.2736.1 |
A private enterprise MIB for EtherWAN managed switches. |
||
| ewnSwitchM | 1.3.6.1.4.1.2736.1.1 | |||
| ewnSystem | 1.3.6.1.4.1.2736.1.1.1 | |||
| ewnSystemFirmwareRev | 1.3.6.1.4.1.2736.1.1.1.1 | displaystring | read-only |
Firmware Revision |
| ewnSystemConfigOperation | 1.3.6.1.4.1.2736.1.1.1.2 | integer | read-write |
System Configuration operations. This is a write-only variable. On read, it will always return none(0). On loadDefault(1) write, it will restore to default and reboot the system. Enumeration: 'loadDefault': 1, 'none': 0, 'saveCurrent': 2. |
| ewnSystemReboot | 1.3.6.1.4.1.2736.1.1.1.3 | integer | read-write |
System Warm Reboot Functionality Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnSystemRebootRequired | 1.3.6.1.4.1.2736.1.1.1.4 | integer | read-only |
System Warm Reboot Functionality Enumeration: 'rebootRequired': 1, 'rebootNotRequired': 0. |
| ewnSystemTFTP | 1.3.6.1.4.1.2736.1.1.1.5 | |||
| ewnSystemTFTPFilename | 1.3.6.1.4.1.2736.1.1.1.5.1 | displaystring | read-write |
Filename for TFTP download |
| ewnSystemTFTPIpAddress | 1.3.6.1.4.1.2736.1.1.1.5.2 | ipaddress | read-write |
IPAddress of TFTP server |
| ewnSystemTFTPAction | 1.3.6.1.4.1.2736.1.1.1.5.3 | integer | read-write |
Action of the current TFTP session Enumeration: 'installConfiguration': 1, 'backupConfiguration': 2. |
| ewnSystemTFTPState | 1.3.6.1.4.1.2736.1.1.1.5.4 | integer | read-write |
State of the current TFTP session Enumeration: 'start': 1, 'none': 0, 'done': 3, 'inProgress': 2, 'error': 4. |
| ewnSystemProductModel | 1.3.6.1.4.1.2736.1.1.1.6 | displaystring | read-only |
Product Model Number |
| ewnSystemHardwareRev | 1.3.6.1.4.1.2736.1.1.1.7 | displaystring | read-only |
Hardware Revision |
| ewnSystemGatewayIpAddress | 1.3.6.1.4.1.2736.1.1.1.8 | ipaddress | read-write |
Default Gateway IP Address for this device |
| ewnSystemMacAddr | 1.3.6.1.4.1.2736.1.1.1.9 | octet string | read-only |
MAC Address of the switch. |
| ewnSystemPassword | 1.3.6.1.4.1.2736.1.1.1.10 | displaystring | read-write |
Password for the user root. Setting a zero-length string removes the password. Reading this object always returns a string of '******'. |
| ewnSystemPasswordEncrypted | 1.3.6.1.4.1.2736.1.1.1.11 | displaystring | read-write |
Password for the user root. Setting a zero-length string removes the password. The password will be encrypted before saved to the configuration file. Reading this object always returns a string of '******'. |
| ewnSystemAutoSaveState | 1.3.6.1.4.1.2736.1.1.1.12 | integer | read-write |
Auto save system configuration Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnSystemAutoSaveDelay | 1.3.6.1.4.1.2736.1.1.1.13 | integer32 | read-write |
Delay time in seconds for auto save system configuration |
| ewnSystemProductSeries | 1.3.6.1.4.1.2736.1.1.1.14 | displaystring | read-only |
On fast Ethernet switches, this property indicates the name of the product series the switch belongs to. On the GbE switches, this property indicates the model number. |
| ewnSystemTraps | 1.3.6.1.4.1.2736.1.1.1.15 | |||
| ewnTrapsLoopbackDetected | 1.3.6.1.4.1.2736.1.1.1.15.1 |
A ewnTrapsLoopbackDetected trap signifies that the SNMP entity, acting in an agent role, has detected that the interface is error-disabled by loopback-detect after a loopback has occurred. |
||
| ewnTrapsMacChangedNotification | 1.3.6.1.4.1.2736.1.1.1.15.2 |
This notification is generated when there is at least one MAC address changed or removed. |
||
| ewnTrapsRringTopologyChange | 1.3.6.1.4.1.2736.1.1.1.15.3 |
A topologyChange trap is sent by a bridge when any of rring ports transitions from the Blocking state to the Forwarding state, and from the Forwarding state to the Blocking state. |
||
| ewnTrapsDigitalIOInput1 | 1.3.6.1.4.1.2736.1.1.1.15.4 |
This notification is also generated when there is digital input io number 1 has detected. |
||
| ewnTrapsDigitalIOInput2 | 1.3.6.1.4.1.2736.1.1.1.15.5 |
This notification is also generated when there is digital input io number 2 has detected. |
||
| ewnTrapsPowerUp | 1.3.6.1.4.1.2736.1.1.1.15.6 |
This notification is power Up . |
||
| ewnTrapsPowerDown | 1.3.6.1.4.1.2736.1.1.1.15.7 |
This notification is power Down . |
||
| ewnTrapsPoEIFUp | 1.3.6.1.4.1.2736.1.1.1.15.8 |
This notification is PoE Interface Up . |
||
| ewnTrapsPoEIFDown | 1.3.6.1.4.1.2736.1.1.1.15.9 |
This notification is PoE Interface Down . |
||
| ewnTrapsPoEOverLoad | 1.3.6.1.4.1.2736.1.1.1.15.10 |
This notification is PoE Over Load . |
||
| ewnTrapsPoESystemError | 1.3.6.1.4.1.2736.1.1.1.15.11 |
This notification is PoE System Error . |
||
| ewnTrapsRringCPTopologyChange | 1.3.6.1.4.1.2736.1.1.1.15.12 |
A topologyChange trap is sent by a bridge when any of coupling ports transitions from the Blocking state to the Forwarding state, and from the Forwarding state to the Blocking state. |
||
| ewnStormDetected | 1.3.6.1.4.1.2736.1.1.1.15.13 |
A ewnStormDetected trap signifies that the SNMP entity, acting in an agent role, has detected the interface is error-disabled by storm-detect. |
||
| ewnTrapsUserLogin | 1.3.6.1.4.1.2736.1.1.1.15.17 |
This trap is sent when a user logs in. |
||
| ewnTrapsUserLogout | 1.3.6.1.4.1.2736.1.1.1.15.18 |
This trap is sent when a user logs out. |
||
| ewnTrapsUserLoginFailure | 1.3.6.1.4.1.2736.1.1.1.15.19 |
This trap is sent when a user login has been rejected. |
||
| ewnSystemPowerState | 1.3.6.1.4.1.2736.1.1.1.16 | octet string | read-only |
This object contains the information of Power change event. Each tuple consist of 2 octets in the format of |
| ewnSystemLogin | 1.3.6.1.4.1.2736.1.1.1.17 | |||
| ewnSystemLoginUserName | 1.3.6.1.4.1.2736.1.1.1.17.1 | displaystring | no-access |
The name of the user who is attempting or has been authenticated. |
| ewnSystemLoginMethod | 1.3.6.1.4.1.2736.1.1.1.17.2 | integer | no-access |
The service or application name that the connection is established by: telnet, ssh, web. Enumeration: 'web': 4, 'serial': 1, 'ssh': 2, 'telnet': 3. |
| ewnSystemLoginUserIpAddr | 1.3.6.1.4.1.2736.1.1.1.17.3 | ipaddress | no-access |
The user's IP Address. |
| ewnSystemIntegrateProductSeries | 1.3.6.1.4.1.2736.1.1.1.18 | displaystring | read-only |
The name of the product series the device belongs to. |
| ewnPort | 1.3.6.1.4.1.2736.1.1.2 | |||
| ewnPortCount | 1.3.6.1.4.1.2736.1.1.2.1 | integer32 | read-only |
Port count |
| ewnPortTable | 1.3.6.1.4.1.2736.1.1.2.2 | no-access |
Port table |
|
| 1.3.6.1.4.1.2736.1.1.2.2.1 | no-access |
Port entry |
||
| ewnPortNo | 1.3.6.1.4.1.2736.1.1.2.2.1.1 | integer32 | read-only |
Port Number |
| ewnPortString | 1.3.6.1.4.1.2736.1.1.2.2.1.2 | displaystring | read-only |
Port String |
| ewnPortHardwareType | 1.3.6.1.4.1.2736.1.1.2.2.1.3 | integer | read-only |
Port hardware type Enumeration: 'type1GFx': 5, 'type100M': 2, 'type1G': 4, 'typeUnknown': 8, 'type100MFX': 6, 'type10M': 1, 'typeMII': 3, 'type10GFx': 9, 'typeVDSL': 7. |
| ewnPortLinkStatus | 1.3.6.1.4.1.2736.1.1.2.2.1.4 | integer | read-only |
Port Link Status Enumeration: 'down': 0, 'up': 1. |
| ewnPortLinkConfig | 1.3.6.1.4.1.2736.1.1.2.2.1.5 | integer | read-write |
Port Administrative Link Status identical to ifAdminStatus Enumeration: 'down': 0, 'up': 1. |
| ewnPortSpeedStatus | 1.3.6.1.4.1.2736.1.1.2.2.1.6 | integer | read-only |
Port Speed Status Enumeration: 'speed10M': 0, 'speed1G': 2, 'speed10G': 5, 'speed100M': 1, 'speedVDSL': 3, 'speedUnknown': 4. |
| ewnPortSpeedConfig | 1.3.6.1.4.1.2736.1.1.2.2.1.7 | integer | read-write |
Port Speed Configuration Enumeration: 'speed1G': 2, 'speed10G': 5, 'speedAuto': 3, 'speed100M': 1, 'speedVDSL': 4, 'speed10M': 0. |
| ewnPortDupStatus | 1.3.6.1.4.1.2736.1.1.2.2.1.8 | integer | read-only |
Port Duplexity Status Enumeration: 'auto': 2, 'full': 1, 'na': 3, 'half': 0. |
| ewnPortDupConfig | 1.3.6.1.4.1.2736.1.1.2.2.1.9 | integer | read-write |
Port Duplexity Configuration Enumeration: 'auto': 2, 'full': 1, 'na': 3, 'half': 0. |
| ewnPortFlowStatus | 1.3.6.1.4.1.2736.1.1.2.2.1.10 | integer | read-only |
Port Flow Control Status Enumeration: 'txRxOn': 1, 'off': 0, 'txOnOnly': 2, 'rxOnOnly': 3. |
| ewnPortFlowConfig | 1.3.6.1.4.1.2736.1.1.2.2.1.11 | integer | read-write |
Port Flow Control Configuration Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnPortFuncType | 1.3.6.1.4.1.2736.1.1.2.2.1.12 | integer | read-write |
The operational mode of the port Enumeration: 'routerport': 1, 'switchport': 0. |
| ewnPortBroadcastLimit | 1.3.6.1.4.1.2736.1.1.2.2.1.13 | integer | read-write |
Switch Broadcast rate limit type. Enumeration: 'enable': 1, 'disable': 0. |
| ewnPortDlfMulticastLimit | 1.3.6.1.4.1.2736.1.1.2.2.1.15 | integer | read-write |
Switch DLF and Multicast rate limit type. Enumeration: 'enable': 1, 'disable': 0. |
| ewnPortLimitLevel | 1.3.6.1.4.1.2736.1.1.2.2.1.16 | displaystring | read-write |
Switch rate limit level. |
| ewnPortPriority | 1.3.6.1.4.1.2736.1.1.2.2.1.17 | integer32 | read-write |
Default priority for untagged frames received by this port |
| ewnPortVlanMode | 1.3.6.1.4.1.2736.1.1.2.2.1.18 | integer | read-write |
VLAN switch port mode. Enumeration: 'access': 1, 'portbase': 4, 'hybrid': 2, 'trunk': 3. |
| ewnPortPVID | 1.3.6.1.4.1.2736.1.1.2.2.1.19 | integer32 | read-write |
Port VLAN ID (1..4094). |
| ewnPortResetRMONCount | 1.3.6.1.4.1.2736.1.1.2.2.1.20 | integer | read-write |
reset RMON counters on this port. Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnPortDescription | 1.3.6.1.4.1.2736.1.1.2.2.1.21 | displaystring | read-write |
Port name |
| ewnPortTrafficTx | 1.3.6.1.4.1.2736.1.1.2.2.1.22 | displaystring | read-only |
Percentage utilization of ifOutOctets. The utilization is a floating point number with two digits after the decimal point, but represented as a string value. For example, '100.00' indicates 100% and '0.18' indicates 0.18%. |
| ewnPortTrafficRx | 1.3.6.1.4.1.2736.1.1.2.2.1.23 | displaystring | read-only |
Percentage utilization of ifInOctets. The utilization is a floating point number with two digits after the decimal point, but represented as a string value. For example, '100.00' indicates 100% and '0.18' indicates 0.18%. |
| ewnPortMacChangedMsg | 1.3.6.1.4.1.2736.1.1.2.3 | octet string | no-access |
This object contains the information of a MAC change notification event. It consists of several tuples packed together in the format of ' |
| ewnStormDetect | 1.3.6.1.4.1.2736.1.1.2.4 | |||
| ewnStormDetectConfig | 1.3.6.1.4.1.2736.1.1.2.4.1 | integer | read-write |
Enable/disable the Storm Detect feature. A storm detect notification will always be generated when a storm event is detected and if this feature is enabled. Enumeration: 'enable': 1, 'disable': 0. |
| ewnStormDetectInterval | 1.3.6.1.4.1.2736.1.1.2.4.2 | integer32 | read-write |
Storm Detect measurement interval in seconds, in the range of 2 to 65535 seconds, with a default of 10 seconds. |
| ewnStormDetErrdisRecoveryTime | 1.3.6.1.4.1.2736.1.1.2.4.3 | integer32 | read-write |
Storm Detect error-disable recovery time interval, in the range of 2 to 65535 seconds. Default: 0 sec indicates that automatic recovery is disabled. |
| ewnStormDetectState | 1.3.6.1.4.1.2736.1.1.2.4.4 | integer | read-only |
Storm Detect state of action. Enumeration: 'errdisable': 1, 'disable': 0, 'trap': 2. |
| ewnStormDetectPerPortTable | 1.3.6.1.4.1.2736.1.1.2.4.5 | no-access |
Storm Detect Per Port Configuration |
|
| 1.3.6.1.4.1.2736.1.1.2.4.5.1 | no-access |
Storm Detect Per Port Table Entry |
||
| ewnStormDetectPort | 1.3.6.1.4.1.2736.1.1.2.4.5.1.1 | integer32 | read-only |
Storm Detect Port |
| ewnStormDetectPortState | 1.3.6.1.4.1.2736.1.1.2.4.5.1.2 | integer | read-only |
disabled(0) - indicates that storm detection is not enabled. normal(1) - indicates that storm detection is enabled, but no storm event has occurred yet. shutdown(2) - indicates that storm detect is enabled and that the interface is error-disabled by storm detection in response to a storm event. Enumeration: 'disabled': 0, 'shutdown': 2, 'normal': 1. |
| ewnStormDetectThresholdUtil | 1.3.6.1.4.1.2736.1.1.2.4.5.1.3 | integer32 | read-write |
The threshold, in percentage of bandwidth utilization. When it is set to zero, the threshold is disabled. When inbound traffic of all traffic types on this interface exceeds the threshold, a storm event will be generated. |
| ewnStormDetectTrafficType | 1.3.6.1.4.1.2736.1.1.2.4.5.1.4 | integer | read-write |
This object identifies a particular traffice type for use in storm detect. Enumeration: 'broadcast': 0, 'multicastBroadcast': 1. |
| ewnStormDetectThresholdPktsPerSec | 1.3.6.1.4.1.2736.1.1.2.4.5.1.5 | integer32 | read-write |
The threshold, in packets per second. When it is set to zero, the threshold is disabled. When inbound traffic of a particular traffic type on this interface exceeds the threshold, a storm event will be generated. |
| ewnPortAlarmTable | 1.3.6.1.4.1.2736.1.1.2.5 | no-access |
This table specifies alarm control and status information related to each port. |
|
| 1.3.6.1.4.1.2736.1.1.2.5.1 | no-access |
Port Alarm Table Entry |
||
| ewnPortAlarmNo | 1.3.6.1.4.1.2736.1.1.2.5.1.1 | integer32 | read-only |
Port Alarm Table Index |
| ewnPortAlarmPortName | 1.3.6.1.4.1.2736.1.1.2.5.1.2 | displaystring | read-only |
Name of an interface. |
| ewnPortAlarmEnable | 1.3.6.1.4.1.2736.1.1.2.5.1.3 | integer | read-write |
Individual port alarms can be enabled/disabled by this property. Enumeration: 'enable': 0, 'disable': 1. |
| ewnPortAlarmPortStatus | 1.3.6.1.4.1.2736.1.1.2.5.1.4 | integer | read-only |
The current operational state of this interface. Enumeration: 'linkUp': 0, 'linkDown': 1. |
| ewnPowerAlarmStatusTable | 1.3.6.1.4.1.2736.1.1.2.6 | no-access |
Deprecated. It is replaced by ewnPowerSupplyTable. |
|
| 1.3.6.1.4.1.2736.1.1.2.6.1 | no-access |
Power Alarm Table Entry |
||
| ewnPowerAlarmStatusNO | 1.3.6.1.4.1.2736.1.1.2.6.1.1 | integer32 | read-only |
Power Alarm Table Index |
| ewnPowerAlarmStatusPowerName | 1.3.6.1.4.1.2736.1.1.2.6.1.2 | displaystring | read-only |
Power Alarm Table Power Name |
| ewnPowerAlarmStatusTrigger | 1.3.6.1.4.1.2736.1.1.2.6.1.3 | integer | read-write |
Power Alarm Table Trigger Enable/Disable Enumeration: 'enable': 0, 'disable': 1. |
| ewnPowerAlarmStatusPowerStatus | 1.3.6.1.4.1.2736.1.1.2.6.1.4 | integer | read-only |
Power Alarm Table Power Status Enumeration: 'linkUp': 0, 'linkDown': 1. |
| ewnMirror | 1.3.6.1.4.1.2736.1.1.3 | |||
| ewnMirrorAvailablePortMap | 1.3.6.1.4.1.2736.1.1.3.1 | octet string | read-only |
A bitmap of ports, with each bit indicating availability of a port to be a candidate for mirrored port. For example, if fe3 is mirrored-to port, and fe9 is mirrored port. This object would have a value of 'DF 7F C0' (in hex), assuming the device has 18 ports.: Octet Bits Ports -------- ----------- --------------------------------------- DF 1101 1111 Port 3(fe3) is not available 7F 0111 1111 Port 9(fe9) is not available C0 1100 0000 Port 17(ge1),18(ge2) are available Note that bit 7 of the first octet (value of 0xDF) represents port 1 (fe1). |
| ewnMirrorCount | 1.3.6.1.4.1.2736.1.1.3.2 | integer32 | read-only |
Maximum number of mirror entries supported by the device. |
| ewnMirrorTable | 1.3.6.1.4.1.2736.1.1.3.3 | no-access |
Port Mirroring table |
|
| 1.3.6.1.4.1.2736.1.1.3.3.1 | no-access |
Mirror Entry |
||
| ewnMirrorIndex | 1.3.6.1.4.1.2736.1.1.3.3.1.1 | integer32 | read-only |
Mirror index |
| ewnMirrorToPort | 1.3.6.1.4.1.2736.1.1.3.3.1.2 | integer32 | read-write |
Mirror to port |
| ewnMirrorFromPortMap | 1.3.6.1.4.1.2736.1.1.3.3.1.3 | octet string | read-write |
Mirror from port map |
| ewnMirrorMode | 1.3.6.1.4.1.2736.1.1.3.3.1.4 | integer | read-write |
Mirror mode Enumeration: 'receive': 1, 'transmit': 2, 'receiveandtransmit': 3. |
| ewnTrunk | 1.3.6.1.4.1.2736.1.1.4 | |||
| ewnTrunkCount | 1.3.6.1.4.1.2736.1.1.4.1 | integer32 | read-only |
Trunk count |
| ewnTrunkTable | 1.3.6.1.4.1.2736.1.1.4.2 | no-access |
Port Trunking table |
|
| 1.3.6.1.4.1.2736.1.1.4.2.1 | no-access |
Trunk Entry |
||
| ewnTrunkIndex | 1.3.6.1.4.1.2736.1.1.4.2.1.1 | integer32 | read-only |
Trunk index |
| ewnTrunkPortMap | 1.3.6.1.4.1.2736.1.1.4.2.1.2 | octet string | read-write |
Trunk port map |
| ewnTrunkAvailPortMap | 1.3.6.1.4.1.2736.1.1.4.2.1.3 | octet string | read-only |
Available trunk port map |
| ewnTrunkMaxNumOfPorts | 1.3.6.1.4.1.2736.1.1.4.2.1.4 | integer32 | read-only |
Maximum number of ports per trunk group. |
| ewnLACP | 1.3.6.1.4.1.2736.1.1.5 | |||
| ewnBridge | 1.3.6.1.4.1.2736.1.1.6 | |||
| ewnBridgeSTPState | 1.3.6.1.4.1.2736.1.1.6.1 | integer | read-write |
Spanning Tree Protocol functionality Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnBridgeAgingTime | 1.3.6.1.4.1.2736.1.1.6.2 | integer32 | read-write |
Bridge aging time |
| ewnIGMP | 1.3.6.1.4.1.2736.1.1.7 | |||
| ewnIGMPState | 1.3.6.1.4.1.2736.1.1.7.1 | integer | read-write |
Internet Group Management Protocol functionality Enumeration: 'disabled': 0, 'passive': 1, 'querier': 2. |
| ewnIGMPCfgTable | 1.3.6.1.4.1.2736.1.1.7.2 | no-access |
IGMP configuration table, an entry per VLAN |
|
| 1.3.6.1.4.1.2736.1.1.7.2.1 | no-access |
IGMP configuration entry |
||
| ewnIGMPCfgIndex | 1.3.6.1.4.1.2736.1.1.7.2.1.1 | integer32 | read-only |
IGMP configuration entry index |
| ewnIGMPCfgVlanID | 1.3.6.1.4.1.2736.1.1.7.2.1.2 | integer32 | read-only |
IGMP configuration entry's VLAN ID |
| ewnIGMPCfgIGMPVersion | 1.3.6.1.4.1.2736.1.1.7.2.1.3 | integer32 | read-write |
IGMP Version |
| ewnIGMPCfgFastLeave | 1.3.6.1.4.1.2736.1.1.7.2.1.4 | integer | read-write |
IGMP Fast-leave function Enumeration: 'enable': 1, 'disable': 0. |
| ewnIGMPCfgQueryInterval | 1.3.6.1.4.1.2736.1.1.7.2.1.5 | integer32 | read-write |
IGMP Querrier Interval for active mode |
| ewnIGMPCfgMaxResponseTime | 1.3.6.1.4.1.2736.1.1.7.2.1.6 | integer32 | read-write |
IGMP Max Response Time for active mode |
| ewnIGMPCfgReportSuppression | 1.3.6.1.4.1.2736.1.1.7.2.1.7 | integer | read-write |
IGMP Report Suppression function Enumeration: 'enable': 1, 'disable': 0. |
| ewnIGMPRecordTable | 1.3.6.1.4.1.2736.1.1.7.3 | no-access |
IGMP record database table |
|
| 1.3.6.1.4.1.2736.1.1.7.3.1 | no-access |
IGMP entry |
||
| ewnIGMPRecordIndex | 1.3.6.1.4.1.2736.1.1.7.3.1.1 | integer32 | read-only |
IGMP Group index |
| ewnIGMPRecordGroupAddress | 1.3.6.1.4.1.2736.1.1.7.3.1.2 | ipaddress | read-only |
IGMP group address |
| ewnIGMPRecordInterface | 1.3.6.1.4.1.2736.1.1.7.3.1.3 | displaystring | read-only |
IGMP group member interface |
| ewnIGMPRecordUpTime | 1.3.6.1.4.1.2736.1.1.7.3.1.4 | displaystring | read-only |
IGMP group up time |
| ewnIGMPRecordExpireTime | 1.3.6.1.4.1.2736.1.1.7.3.1.5 | displaystring | read-only |
IGMP group expire time |
| ewnIGMPRecordLastReporter | 1.3.6.1.4.1.2736.1.1.7.3.1.6 | ipaddress | read-only |
IGMP group last reporter |
| ewnVLAN | 1.3.6.1.4.1.2736.1.1.8 | |||
| ewnVLANGVRPState | 1.3.6.1.4.1.2736.1.1.8.1 | integer | read-write |
GARP VLAN Registration Protocol functionality Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnVLANTable | 1.3.6.1.4.1.2736.1.1.8.2 | no-access |
VLAN Settings Table |
|
| 1.3.6.1.4.1.2736.1.1.8.2.1 | no-access |
VLAN Settings Entry |
||
| ewnVLANIndex | 1.3.6.1.4.1.2736.1.1.8.2.1.1 | integer32 | read-only |
VLAN index |
| ewnVLANID | 1.3.6.1.4.1.2736.1.1.8.2.1.2 | integer32 | read-write |
VLAN ID (valid values 1-4094) |
| ewnVLANName | 1.3.6.1.4.1.2736.1.1.8.2.1.3 | displaystring | read-write |
VLAN Name. This can only be set during creation of VLAN. It cannot be modified in a later time. |
| ewnVLANState | 1.3.6.1.4.1.2736.1.1.8.2.1.4 | integer | read-only |
The VLAN state. Enumeration: 'disabled': 1, 'active': 2, 'invalid': 0. |
| ewnVLANType | 1.3.6.1.4.1.2736.1.1.8.2.1.5 | integer | read-only |
The VLAN type. Enumeration: 'dynamic': 2, 'static': 1, 'invalid': 0. |
| ewnVLANStaticPortMap | 1.3.6.1.4.1.2736.1.1.8.2.1.6 | octet string | read-write |
Ports that always belong to the VLAN. |
| ewnVLANStaticUntaggedPortMap | 1.3.6.1.4.1.2736.1.1.8.2.1.7 | octet string | read-write |
Untagged ports of the VLAN. |
| ewnVLANCurrentPortMap | 1.3.6.1.4.1.2736.1.1.8.2.1.8 | octet string | read-only |
Ports currently belonging to the VLAN. |
| ewnVLANCurrentUntaggedPortMap | 1.3.6.1.4.1.2736.1.1.8.2.1.9 | octet string | read-only |
Untagged ports currently belonging to the VLAN. |
| ewnVLANCurrentRegisteredPortMap | 1.3.6.1.4.1.2736.1.1.8.2.1.10 | octet string | read-only |
Registered ports currently belonging to the VLAN. |
| ewnVLANIPAddress | 1.3.6.1.4.1.2736.1.1.8.2.1.11 | displaystring | read-write |
VLAN IP address / mask |
| ewnVLANAddVlan | 1.3.6.1.4.1.2736.1.1.8.3 | integer32 | read-write |
Add a new VLAN to ewnVLANTable |
| ewnVLANDeleteVlan | 1.3.6.1.4.1.2736.1.1.8.4 | integer32 | read-write |
Delete a VLAN from ewnVLANTable |
| ewnQoS | 1.3.6.1.4.1.2736.1.1.9 | |||
| ewnQoSState | 1.3.6.1.4.1.2736.1.1.9.1 | integer | read-write |
QoS state Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnQoSTrust | 1.3.6.1.4.1.2736.1.1.9.2 | integer | read-write |
QoS trust mode Enumeration: 'none': 0, 'cosanddscp': 3, 'cos': 1, 'dscp': 2. |
| ewnQoSPriorityQueueOut | 1.3.6.1.4.1.2736.1.1.9.3 | integer | read-write |
QoS priority queue out mode Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnQoSWRRqueueTable | 1.3.6.1.4.1.2736.1.1.9.4 | no-access |
QoS WRR queue table |
|
| 1.3.6.1.4.1.2736.1.1.9.4.1 | no-access |
QoS WRR queue table entry |
||
| ewnQoSQueueIndex | 1.3.6.1.4.1.2736.1.1.9.4.1.1 | integer32 | read-only |
QoS Queue Index |
| ewnQoSWRRqueueID | 1.3.6.1.4.1.2736.1.1.9.4.1.2 | integer32 | read-only |
QoS WRR queue ID |
| ewnQoSWRRqueueCoSmap | 1.3.6.1.4.1.2736.1.1.9.4.1.3 | displaystring | read-write |
QoS WRR queue CoS mapping |
| ewnQoSWRRqueueDSCPmap | 1.3.6.1.4.1.2736.1.1.9.4.1.4 | octet string | read-write |
QoS WRR queue DSCP mapping |
| ewnQoSWRRqueueBandwidth | 1.3.6.1.4.1.2736.1.1.9.4.1.5 | integer32 | read-write |
QoS WRR queue bandwidth |
| ewnSNMP | 1.3.6.1.4.1.2736.1.1.10 | |||
| ewnSNMPState | 1.3.6.1.4.1.2736.1.1.10.1 | integer | read-write |
SNMP state Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnSNMPCommunitySet | 1.3.6.1.4.1.2736.1.1.10.2 | displaystring | read-write |
Set community string currently active for this device |
| ewnSNMPCommunityGet | 1.3.6.1.4.1.2736.1.1.10.3 | displaystring | read-write |
Get community string currently active for this device |
| ewnSNMPTrapCommunity1 | 1.3.6.1.4.1.2736.1.1.10.4 | displaystring | read-write |
Trap community string 1 for this device |
| ewnSNMPTrapCommunity2 | 1.3.6.1.4.1.2736.1.1.10.5 | displaystring | read-write |
Trap community string 2 for this device |
| ewnSNMPTrapCommunity3 | 1.3.6.1.4.1.2736.1.1.10.6 | displaystring | read-write |
Trap community string 3 for this device |
| ewnSNMPTrapCommunity4 | 1.3.6.1.4.1.2736.1.1.10.7 | displaystring | read-write |
Trap community string 4 for this device |
| ewnSNMPTrapCommunity5 | 1.3.6.1.4.1.2736.1.1.10.8 | displaystring | read-write |
Trap community string 5 for this device |
| ewnSNMPTrapIpAddress1 | 1.3.6.1.4.1.2736.1.1.10.9 | ipaddress | read-write |
Trap IP Address 1 for this device |
| ewnSNMPTrapIpAddress2 | 1.3.6.1.4.1.2736.1.1.10.10 | ipaddress | read-write |
Trap IP Address 2 for this device |
| ewnSNMPTrapIpAddress3 | 1.3.6.1.4.1.2736.1.1.10.11 | ipaddress | read-write |
Trap IP Address 3 for this device |
| ewnSNMPTrapIpAddress4 | 1.3.6.1.4.1.2736.1.1.10.12 | ipaddress | read-write |
Trap IP Address 4 for this device |
| ewnSNMPTrapIpAddress5 | 1.3.6.1.4.1.2736.1.1.10.13 | ipaddress | read-write |
Trap IP Address 5 for this device |
| ewnSNMPTrapLinkDown | 1.3.6.1.4.1.2736.1.1.10.16 | integer | read-write |
Link Down Trap functionality Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnSNMPTrapLinkUp | 1.3.6.1.4.1.2736.1.1.10.17 | integer | read-write |
Link Up Trap functionality Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnSNMPResetNeed | 1.3.6.1.4.1.2736.1.1.10.20 | integer | read-only |
Indicate need to reset SNMP process for SNMP entry changed. Enumeration: 'yes': 1, 'no': 0. |
| ewnSNMPResetSNMP | 1.3.6.1.4.1.2736.1.1.10.21 | integer | read-write |
Reset SNMP process for enable SNMP new setting. Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnSNMPResetRMONCount | 1.3.6.1.4.1.2736.1.1.10.22 | integer | read-write |
Reset RMON counters on all the ports. Please refer to ewnPortEntry group to reset specific port. Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnSNMPDescription | 1.3.6.1.4.1.2736.1.1.10.23 | displaystring | read-write |
Snmp Description |
| ewnSNMPMacNotificationInterval | 1.3.6.1.4.1.2736.1.1.10.24 | integer32 | read-write |
Specify the notification trap interval in seconds between each set of traps that are generated. |
| ewnSNMPMacNotifyHistorySize | 1.3.6.1.4.1.2736.1.1.10.25 | integer32 | read-write |
Specify the maximum number of entries in the MAC notification history table. |
| ewnSNMPMacNotifyAddedPortMap | 1.3.6.1.4.1.2736.1.1.10.26 | octet string | read-write |
MAC notification added port map. |
| ewnSNMPMacNotifyRemovedPortMap | 1.3.6.1.4.1.2736.1.1.10.27 | octet string | read-write |
MAC notification removed port map. |
| ewnSNMPTrapMacNotification | 1.3.6.1.4.1.2736.1.1.10.28 | integer | read-write |
MAC Notification Trap functionality Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnSNMPTrapPowerDown | 1.3.6.1.4.1.2736.1.1.10.29 | integer | read-write |
Power Down Trap functionality Enumeration: 'disabled': 0, 'na': 2, 'enabled': 1. |
| ewnSNMPTrapPowerUp | 1.3.6.1.4.1.2736.1.1.10.30 | integer | read-write |
Power Up Trap functionality Enumeration: 'disabled': 0, 'na': 2, 'enabled': 1. |
| ewnSNMPTrapPoEIFDown | 1.3.6.1.4.1.2736.1.1.10.31 | integer | read-write |
PoE Interface Down Trap functionality Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnSNMPTrapPoEIFUp | 1.3.6.1.4.1.2736.1.1.10.32 | integer | read-write |
PoE Interface Trap functionality Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnSNMPTrapPoEOverLoad | 1.3.6.1.4.1.2736.1.1.10.33 | integer | read-write |
PoE Interface or System budget Trap functionality Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnSDB | 1.3.6.1.4.1.2736.1.1.11 | |||
| ewnBridgeSDBTable | 1.3.6.1.4.1.2736.1.1.11.1 | no-access |
Switching Database table |
|
| 1.3.6.1.4.1.2736.1.1.11.1.1 | no-access |
SDB Entry |
||
| ewnBridgeSDBIndex | 1.3.6.1.4.1.2736.1.1.11.1.1.1 | integer32 | read-only |
Switching Database Index |
| ewnBridgeSDBMacAddress | 1.3.6.1.4.1.2736.1.1.11.1.1.2 | physaddress | read-only |
Switching Database MAC address |
| ewnBridgeSDBVlanId | 1.3.6.1.4.1.2736.1.1.11.1.1.3 | integer32 | read-only |
Switching Database VLAN ID |
| ewnBridgeSDBPortNo | 1.3.6.1.4.1.2736.1.1.11.1.1.4 | integer32 | read-only |
Switching Database port number |
| ewnRadius | 1.3.6.1.4.1.2736.1.1.12 | |||
| ewnDHCP | 1.3.6.1.4.1.2736.1.1.13 | |||
| ewnRedundancy | 1.3.6.1.4.1.2736.1.1.14 | |||
| ewnRing | 1.3.6.1.4.1.2736.1.1.14.1 | |||
| ewnRingCtrl | 1.3.6.1.4.1.2736.1.1.14.1.1 | integer | read-write |
Enable/disable the Ring Protocol for the bridge. When 'disable(1)', the ring port will be operating in (R)STP mode if (R)STP is enabled, or placed in a forwarding state if (R)STP is not enabled. When 'enable(2)', the port will be operating in alpha ring mode. Enumeration: 'enable': 2, 'disable': 1. |
| ewnRingCouplingCtrl | 1.3.6.1.4.1.2736.1.1.14.1.2 | integer | read-write |
Enable/disable the Ring-coupling Protocol for the bridge. When 'disable(1)', the coupling port will be operating in (R)STP mode if (R)STP is enabled, or placed in a forwarding state if (R)STP is not enabled. When 'enable(2)', the coupling port will be operating in alpha ring coupling mode. Enumeration: 'neighborOnly': 3, 'enable': 2, 'disable': 1. |
| ewnRingAvailablePortList | 1.3.6.1.4.1.2736.1.1.14.1.3 | octet string | read-only |
This object identifies a list of ports that are eligible to run Ring or Ring-coupling protocol. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the system is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. |
| ewnRingPortList | 1.3.6.1.4.1.2736.1.1.14.1.4 | octet string | read-write |
This object identifies a list of ports that are enabled to run Ring protocol. It should be noted that only 2 ports can be set as Ring ports. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the system is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. |
| ewnRingCouplingPortList | 1.3.6.1.4.1.2736.1.1.14.1.5 | octet string | read-write |
This object identifies a list of ports that are enabled to run Ring-coupling protocol. It should be noted that only 2 ports can be set as Ring-coupling ports. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the system is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. |
| ewnRingPortTable | 1.3.6.1.4.1.2736.1.1.14.1.6 | no-access |
Table of information containing the port control and state in the Ring. |
|
| 1.3.6.1.4.1.2736.1.1.14.1.6.1 | no-access |
An entry in the table, containing the port control and state in the Ring. |
||
| ewnRingPortIndex | 1.3.6.1.4.1.2736.1.1.14.1.6.1.1 | integer32 | read-only |
This object identifies the ring(coupling) port identifier for which this entry contains information. |
| ewnRingPortType | 1.3.6.1.4.1.2736.1.1.14.1.6.1.2 | displaystring | read-only |
This object identifies the ring(coupling) port type. |
| ewnRingPortNumber | 1.3.6.1.4.1.2736.1.1.14.1.6.1.3 | integer32 | read-only |
This object identifies the ring(coupling) port number. |
| ewnRingPortState | 1.3.6.1.4.1.2736.1.1.14.1.6.1.4 | integer | read-only |
This object identifies the ring(coupling) port state. Enumeration: 'down': 1, 'forward': 4, 'suspend': 2, 'block': 3. |
| ewnChain | 1.3.6.1.4.1.2736.1.1.14.2 | |||
| ewnChainVLAN | 1.3.6.1.4.1.2736.1.1.14.2.1 | integer32 | read-write |
The chain VLAN configuration of bridge . |
| ewnChainPriority | 1.3.6.1.4.1.2736.1.1.14.2.2 | integer32 | read-write |
The chain priority configuration of the device. Lower numbers indicate higher priority. |
| ewnChainTimeOutCount | 1.3.6.1.4.1.2736.1.1.14.2.3 | integer32 | read-write |
The chain timeout count configuration of bridge. |
| ewnChainStormControl | 1.3.6.1.4.1.2736.1.1.14.2.4 | integer | read-write |
Enable / disable the broadcast and multicast storm control function for chain port. Enumeration: 'enable': 2, 'disable': 1. |
| ewnChainPortTable | 1.3.6.1.4.1.2736.1.1.14.2.5 | no-access |
Table of information containing the port control , role and state in the Chain. |
|
| 1.3.6.1.4.1.2736.1.1.14.2.5.1 | no-access |
An entry in the table, containing the port control , role and state in the Chain. |
||
| ewnChainPortIndex | 1.3.6.1.4.1.2736.1.1.14.2.5.1.1 | integer32 | read-only |
This object identifies the port identifier for which this entry contains information. |
| ewnChainPort | 1.3.6.1.4.1.2736.1.1.14.2.5.1.2 | integer | read-write |
Enable / disable the port to run chain protocol. Enumeration: 'enable': 2, 'disable': 1. |
| ewnChainPortRole | 1.3.6.1.4.1.2736.1.1.14.2.5.1.3 | integer | read-only |
This object identifies the chain port role. Enumeration: 'slave': 4, 'init': 2, 'master': 3, 'unknown': 5, 'noLink': 1. |
| ewnChainPortState | 1.3.6.1.4.1.2736.1.1.14.2.5.1.4 | integer | read-only |
This object identifies the chain port state. Enumeration: 'forward': 2, 'unknown': 3, 'block': 1. |
| ewnChainPassPortList | 1.3.6.1.4.1.2736.1.1.14.2.6 | octet string | read-write |
This object identifies the set of ports enabled to run Chain pass-through protocol. It should be noted that only 2 ports can be set as Chain pass-through ports. |
| ewnChainPassPortTable | 1.3.6.1.4.1.2736.1.1.14.2.7 | no-access |
Table of information containing the port control, role and state in the Chain pass-through. |
|
| 1.3.6.1.4.1.2736.1.1.14.2.7.1 | no-access |
An entry in the table, containing the port control , role and state in the Chain pass-through. |
||
| ewnChainPassPortIndex | 1.3.6.1.4.1.2736.1.1.14.2.7.1.1 | integer32 | read-only |
This object identifies the port identifier for which this entry contains information. |
| ewnChainPassPortNum | 1.3.6.1.4.1.2736.1.1.14.2.7.1.2 | integer32 | read-write |
This object identifies the chain pass-through port number. |
| ewnChainPassPortRole | 1.3.6.1.4.1.2736.1.1.14.2.7.1.3 | integer | read-only |
This object identifies the chain pass-through port role. Enumeration: 'unknown': 4, 'init': 2, 'fowarder': 3, 'noLink': 1. |
| ewnChainPassPortState | 1.3.6.1.4.1.2736.1.1.14.2.7.1.4 | integer | read-only |
This object identifies the chain pass-through port state. Enumeration: 'forward': 2, 'unknown': 3, 'block': 1. |
| ewnSensor | 1.3.6.1.4.1.2736.1.1.15 | |||
| ewnSensorTraps | 1.3.6.1.4.1.2736.1.1.15.1 | |||
| ewnSensorTempOverTrap | 1.3.6.1.4.1.2736.1.1.15.1.1 |
This trap is sent when temperature has exceeded the upper threshold. |
||
| ewnSensorTempUnderTrap | 1.3.6.1.4.1.2736.1.1.15.1.2 |
This trap is sent when temperature has fallen below the lower threshold. |
||
| ewnSensorHumidityOverTrap | 1.3.6.1.4.1.2736.1.1.15.1.3 |
This trap is sent when humidity has exceeded the upper threshold. |
||
| ewnSensorHumidityUnderTrap | 1.3.6.1.4.1.2736.1.1.15.1.4 |
This trap is sent when humidity has fallen below the lower threshold. |
||
| ewnSensorDigitalInputTrap | 1.3.6.1.4.1.2736.1.1.15.1.5 |
This trap is sent when the state at the digital pin changes from HIGH to LOW if the value of ewnSensorDigitalInputTrapEnable is lowLevel(0). This trap is sent when the state at the digital pin changes from LOW to HIGH. if the value of ewnSensorDigitalInputTrapEnable is highLevel(1). |
||
| ewnSensorTempNormalTrap | 1.3.6.1.4.1.2736.1.1.15.1.6 |
This trap is sent when temperature has changed from alarm to normal. |
||
| ewnSensorHumidityNormalTrap | 1.3.6.1.4.1.2736.1.1.15.1.7 |
This trap is sent when humidity has changed from alarm to normal. |
||
| ewnSensorDigitalInputNormalTrap | 1.3.6.1.4.1.2736.1.1.15.1.8 |
This trap is sent when the state at the digital pin changes from LOW (alarm) to HIGH (normal) if the value of ewnSensorDigitalInputTrapEnable is lowLevel(0). This trap is sent when the state at the digital pin changes from HIGH (alarm) to LOW (normal). if the value of ewnSensorDigitalInputTrapEnable is highLevel(1). |
||
| ewnSensorObjects | 1.3.6.1.4.1.2736.1.1.15.2 | |||
| ewnSensorPollEnable | 1.3.6.1.4.1.2736.1.1.15.2.1 | truthvalue | read-write |
A value of true(1) indicates that sensor polling is enabled. |
| ewnSensorPollInterval | 1.3.6.1.4.1.2736.1.1.15.2.2 | integer32 | read-write |
Specifies how often (in seconds) the switch polls for the change that triggers an alarm. This applies to all sensors (including Digital Input). Default value is 60 seconds. |
| ewnSensorTempTrapEnable | 1.3.6.1.4.1.2736.1.1.15.2.3 | truthvalue | read-write |
When the value of this object is true(1), generation of ewnSensorTempOverTrap and ewnSensorTempUnderTrap is enabled. |
| ewnSensorHumidityTrapEnable | 1.3.6.1.4.1.2736.1.1.15.2.4 | truthvalue | read-write |
When the value of this object is true(1), generation of ewnSensorHumidityOverTrap and ewnSensorHumidityUnderTrap is enabled. |
| ewnSensorTempHighThreshold | 1.3.6.1.4.1.2736.1.1.15.2.5 | integer32 | read-write |
The upper threshold for this sensor. The value would be interpreted as (degrees C * 10) or (degrees F * 10). A value of -2730 indicates no threshold is defined. |
| ewnSensorTempLowhreshold | 1.3.6.1.4.1.2736.1.1.15.2.6 | integer32 | read-write |
The lower threshold for this sensor. The value would be interpreted as (degrees C * 10) or (degrees F * 10). A value of -2730 indicates no threshold is defined. |
| ewnSensorHumidityHighThreshold | 1.3.6.1.4.1.2736.1.1.15.2.7 | integer32 | read-write |
The upper threshold for this sensor in percentRH. A value of 0 indicates no threhold is defined. |
| ewnSensorHumidityLowThreshold | 1.3.6.1.4.1.2736.1.1.15.2.8 | integer32 | read-write |
The upper threshold for this sensor in percentRH. A value of 0 indicates no threhold is defined. |
| ewnSensorTemperatureMinInterval | 1.3.6.1.4.1.2736.1.1.15.2.9 | integer | read-write |
Specifies the minimum period in seconds between two successive traps. This applies to e-mail notification too. A value of 0 indicates no trap will be sent on the same event. |
| ewnSensorHumidityMinInterval | 1.3.6.1.4.1.2736.1.1.15.2.10 | integer | read-write |
Specifies the minimum period in seconds between two successive traps. This applies to e-mail notification too. |
| ewnSensorTempUnit | 1.3.6.1.4.1.2736.1.1.15.2.11 | integer | read-write |
This variable indicates the present temperature unit. Enumeration: 'fahrenheit': 1, 'celsius': 0. |
| ewnSensorTempValue | 1.3.6.1.4.1.2736.1.1.15.2.12 | integer32 | read-only |
The current Celsius temperature reading if a temperature sensor is present on this system. The value would be interpreted as (degrees C * 10) or (degrees F * 10) |
| ewnSensorHumidityValue | 1.3.6.1.4.1.2736.1.1.15.2.13 | integer32 | read-only |
The current humidity reading if a humidity sensor is present on this system. |
| ewnSensorDigitalInputIndex | 1.3.6.1.4.1.2736.1.1.15.2.14 | integer | no-access |
The index of a digital input pin. |
| ewnSensorDigitalInputState | 1.3.6.1.4.1.2736.1.1.15.2.15 | integer | no-access |
This variable reports the most recent measurement seen by the digital input. A value of high(2) indicates HIGH. Enumeration: 'high': 2, 'low': 1. |
| ewnSensorDigitalInputStatus | 1.3.6.1.4.1.2736.1.1.15.2.16 | integer | no-access |
This variable indicates the present operational status of the sensor. Enumeration: 'nonoperational': 3, 'ok': 1, 'unavailable': 2. |
| ewnSensorDigitalInput1Description | 1.3.6.1.4.1.2736.1.1.15.2.17 | displaystring | read-write |
Administratively assigned human-readable name for this digital input pin. |
| ewnSensorDigitalInput1State | 1.3.6.1.4.1.2736.1.1.15.2.18 | integer | read-only |
This variable reports the most recent measurement seen by this digital input. A value of high(2) indicates HIGH. Enumeration: 'high': 2, 'low': 1. |
| ewnSensorDigitalInput1Status | 1.3.6.1.4.1.2736.1.1.15.2.19 | integer | read-only |
This variable indicates the present operational status of this sensor. Enumeration: 'nonoperational': 3, 'ok': 1, 'unavailable': 2. |
| ewnSensorDigitalInput1TrapEnable | 1.3.6.1.4.1.2736.1.1.15.2.20 | integer | read-write |
When the value of this object is lowLevel(1) or highLevel(2), generation of ewnSensorDigitalInput1Trap is enabled. Enumeration: 'disabled': 0, 'lowLevel': 1, 'highLevel': 2. |
| ewnSensorDigitalInput1MinInterval | 1.3.6.1.4.1.2736.1.1.15.2.21 | integer | read-write |
Specifies the minimum period in seconds between two successive traps. This applies to e-mail notification too. |
| ewnSensorDigitalInput2Description | 1.3.6.1.4.1.2736.1.1.15.2.22 | displaystring | read-write |
Administratively assigned human-readable name for this digital input pin. |
| ewnSensorDigitalInput2State | 1.3.6.1.4.1.2736.1.1.15.2.23 | integer | read-only |
This variable reports the most recent measurement seen by this digital input. A value of high(2) indicates HIGH. Enumeration: 'high': 2, 'low': 1. |
| ewnSensorDigitalInput2Status | 1.3.6.1.4.1.2736.1.1.15.2.24 | integer | read-only |
This variable indicates the present operational status of this sensor. Enumeration: 'nonoperational': 3, 'ok': 1, 'unavailable': 2. |
| ewnSensorDigitalInput2TrapEnable | 1.3.6.1.4.1.2736.1.1.15.2.25 | integer | read-write |
When the value of this object is lowLevel(1) or highLevel(2), generation of ewnSensorDigitalInput2Trap is enabled. Enumeration: 'disabled': 0, 'lowLevel': 1, 'highLevel': 2. |
| ewnSensorDigitalInput2MinInterval | 1.3.6.1.4.1.2736.1.1.15.2.26 | integer | read-write |
Specifies the minimum period in seconds between two successive traps. This applies to e-mail notification too. |
| ewnSensorDigitalInput3Description | 1.3.6.1.4.1.2736.1.1.15.2.27 | displaystring | read-write |
Administratively assigned human-readable name for this digital input pin. |
| ewnSensorDigitalInput3State | 1.3.6.1.4.1.2736.1.1.15.2.28 | integer | read-only |
This variable reports the most recent measurement seen by this digital input. A value of high(2) indicates HIGH. Enumeration: 'high': 2, 'low': 1. |
| ewnSensorDigitalInput3Status | 1.3.6.1.4.1.2736.1.1.15.2.29 | integer | read-only |
This variable indicates the present operational status of this sensor. Enumeration: 'nonoperational': 3, 'ok': 1, 'unavailable': 2. |
| ewnSensorDigitalInput3TrapEnable | 1.3.6.1.4.1.2736.1.1.15.2.30 | integer | read-write |
When the value of this object is lowLevel(1) or highLevel(2), generation of ewnSensorDigitalInput3Trap is enabled. Enumeration: 'disabled': 0, 'lowLevel': 1, 'highLevel': 2. |
| ewnSensorDigitalInput3MinInterval | 1.3.6.1.4.1.2736.1.1.15.2.31 | integer | read-write |
Specifies the minimum period in seconds between two successive traps. This applies to e-mail notification too. |
| ewnSensorDigitalInput4Description | 1.3.6.1.4.1.2736.1.1.15.2.32 | displaystring | read-write |
Administratively assigned human-readable name for this digital input pin. |
| ewnSensorDigitalInput4State | 1.3.6.1.4.1.2736.1.1.15.2.33 | integer | read-only |
This variable reports the most recent measurement seen by this digital input. A value of high(2) indicates HIGH. Enumeration: 'high': 2, 'low': 1. |
| ewnSensorDigitalInput4Status | 1.3.6.1.4.1.2736.1.1.15.2.34 | integer | read-only |
This variable indicates the present operational status of this sensor. Enumeration: 'nonoperational': 3, 'ok': 1, 'unavailable': 2. |
| ewnSensorDigitalInput4TrapEnable | 1.3.6.1.4.1.2736.1.1.15.2.35 | integer | read-write |
When the value of this object is lowLevel(1) or highLevel(2), generation of ewnSensorDigitalInput3Trap is enabled. Enumeration: 'disabled': 0, 'lowLevel': 1, 'highLevel': 2. |
| ewnSensorDigitalInput4MinInterval | 1.3.6.1.4.1.2736.1.1.15.2.36 | integer | read-write |
Specifies the minimum period in seconds between two successive traps. This applies to e-mail notification too. |
| ewnVDSL | 1.3.6.1.4.1.2736.1.1.16 | |||
| ewnVDSLCount | 1.3.6.1.4.1.2736.1.1.16.1 | integer32 | read-only |
VDSL port count |
| ewnVDSLCfgTable | 1.3.6.1.4.1.2736.1.1.16.2 | no-access |
VDSL configuration table |
|
| 1.3.6.1.4.1.2736.1.1.16.2.1 | no-access |
VDSL configuration Entry |
||
| ewnVDSLCfgIndex | 1.3.6.1.4.1.2736.1.1.16.2.1.1 | integer32 | read-only |
VDSL configuration entry index |
| ewnVDSLAsymMode | 1.3.6.1.4.1.2736.1.1.16.2.1.2 | integer | read-write |
VDSL asymmetric mode Enumeration: 'disabled': 0, 'enabled': 1. |
| ewnVDSLMaxSpeed | 1.3.6.1.4.1.2736.1.1.16.2.1.3 | integer | read-write |
VDSL maximum speed Enumeration: 'speed1Mbps': 9, 'speed10Mbps': 6, 'speed15Mbps': 5, 'speed40Mbps': 1, 'speed20Mbps': 4, 'speed5Mbps': 7, 'speed25Mbps': 3, 'speed50Mbps': 0, 'speed3Mbps': 8, 'speed30Mbps': 2. |
| ewnVDSLFixedRate | 1.3.6.1.4.1.2736.1.1.16.2.1.4 | integer | read-write |
VDSL fixed rate bandwidth in Mbps: SYM means Symmetric mode and ASYM is used for Asymmetric mode Enumeration: 'sym20MAsym35M6M': 4, 'sym3MAsym12M1M': 8, 'sym1MAsym1M1M': 9, 'sym50MAsym59M31M': 0, 'sym30MAsym47M14M': 2, 'sym25MAsym42M8M': 3, 'disable': 10, 'sym15MAsym28M5M': 5, 'sym40MAsym52M24M': 1, 'sym5MAsym14M2M': 7, 'sym10MAsym22M3M': 6. |
| ewnVDSLRetrain | 1.3.6.1.4.1.2736.1.1.16.2.1.5 | integer | read-write |
Upgrade VDSL speed Enumeration: 'retrain': 1, 'none': 0. |
| ewnVDSLStatTable | 1.3.6.1.4.1.2736.1.1.16.3 | no-access |
VDSL status table |
|
| 1.3.6.1.4.1.2736.1.1.16.3.1 | no-access |
VDSL status Entry |
||
| ewnVDSLStatIndex | 1.3.6.1.4.1.2736.1.1.16.3.1.1 | integer32 | read-only |
VDSL status entry index |
| ewnVDSLLinkSpeed | 1.3.6.1.4.1.2736.1.1.16.3.1.2 | displaystring | read-only |
VDSL link speed |
| ewnVDSLOperMode | 1.3.6.1.4.1.2736.1.1.16.3.1.3 | displaystring | read-only |
VDSL operation mode |
| ewnVDSLSNR1BandOnLocal | 1.3.6.1.4.1.2736.1.1.16.3.1.4 | displaystring | read-only |
SNR of the 1st received band on local side |
| ewnVDSLSNR2BandOnLocal | 1.3.6.1.4.1.2736.1.1.16.3.1.5 | displaystring | read-only |
SNR of the 2nd received band on local side |
| ewnVDSLSNR1BandOnRemote | 1.3.6.1.4.1.2736.1.1.16.3.1.6 | displaystring | read-only |
SNR of the 1st received band on remote side |
| ewnVDSLSNR2BandOnRemote | 1.3.6.1.4.1.2736.1.1.16.3.1.7 | displaystring | read-only |
SNR of the 2nd received band on remote side |
| ewnVDSLStatsTable | 1.3.6.1.4.1.2736.1.1.16.4 | no-access |
VDSL statistics table |
|
| 1.3.6.1.4.1.2736.1.1.16.4.1 | no-access |
VDSL statistics Entry |
||
| ewnVDSLStatsIndex | 1.3.6.1.4.1.2736.1.1.16.4.1.1 | integer32 | read-only |
VDSL statistics entry index |
| ewnVDSLChannelFail | 1.3.6.1.4.1.2736.1.1.16.4.1.2 | counter32 | read-only |
VDSL Channel failures counter |
| ewnVDSLFrameLoss | 1.3.6.1.4.1.2736.1.1.16.4.1.3 | counter32 | read-only |
VDSL Local loss of frame counter |
| ewnVDSLErrs | 1.3.6.1.4.1.2736.1.1.16.4.1.4 | counter32 | read-only |
VDSL Number of uncorrectable code words |
| ewnVDSLBroadcast | 1.3.6.1.4.1.2736.1.1.16.4.1.5 | counter32 | read-only |
VDSL Broadcast frames received counter |
| ewnVDSLRxFrame | 1.3.6.1.4.1.2736.1.1.16.4.1.6 | counter32 | read-only |
VDSL Received frames counter |
| ewnVDSLRxPause | 1.3.6.1.4.1.2736.1.1.16.4.1.7 | counter32 | read-only |
VDSL Reception pause packets counter |
| ewnVDSLRxBytes | 1.3.6.1.4.1.2736.1.1.16.4.1.8 | counter32 | read-only |
VDSL Bytes received OK counter |
| ewnVDSLTxFrame | 1.3.6.1.4.1.2736.1.1.16.4.1.9 | counter32 | read-only |
VDSL Transmitted Frames Counter |
| ewnVDSLTxPause | 1.3.6.1.4.1.2736.1.1.16.4.1.10 | counter32 | read-only |
VDSL Transmission pause packets counter |
| ewnVDSLTxBytes | 1.3.6.1.4.1.2736.1.1.16.4.1.11 | counter32 | read-only |
VDSL Bytes transmitted OK counter |
| ewnPoE | 1.3.6.1.4.1.2736.1.1.17 | |||
| ewnPortPoEBudgetPower | 1.3.6.1.4.1.2736.1.1.17.1 | displaystring | read-write |
System Power Budget |
| ewnPortPoEAvailablePower | 1.3.6.1.4.1.2736.1.1.17.2 | displaystring | read-only |
System Power Available |
| ewnPortPoESettingTable | 1.3.6.1.4.1.2736.1.1.17.3 | no-access |
Power Over Ethernet Port Setting table |
|
| 1.3.6.1.4.1.2736.1.1.17.3.1 | no-access |
Power Over Ethernet Port entry |
||
| ewnPoEPortIndex | 1.3.6.1.4.1.2736.1.1.17.3.1.1 | integer | read-only |
Power Over Ethernet Port Number |
| ewnPoEEnableMode | 1.3.6.1.4.1.2736.1.1.17.3.1.2 | integer | read-write |
Power Over Ethernet Port Mode Control : Disable/Enable/Scheduling Enumeration: 'scheduling': 2, 'enable': 1, 'disable': 0. |
| ewnPoEPowerLimitbyClassification | 1.3.6.1.4.1.2736.1.1.17.3.1.3 | integer | read-write |
Power Limit by Classification : Disable/Enable No Suppert : NA Enumeration: 'na': 2, 'enable': 1, 'disable': 0. |
| ewnPoEPowerLimitFixed | 1.3.6.1.4.1.2736.1.1.17.3.1.4 | displaystring | read-write |
Fixed Power Limit |
| ewnPoEPowerPriority | 1.3.6.1.4.1.2736.1.1.17.3.1.5 | integer | read-write |
Power Priority : Critical/High/Low Enumeration: 'high': 1, 'critical': 0, 'low': 2. |
| ewnPoEPowerDownAlarm | 1.3.6.1.4.1.2736.1.1.17.3.1.6 | integer | read-write |
Power Down Alarm : Disable/Enable Enumeration: 'na': 2, 'enable': 1, 'disable': 0. |
| ewnPoEPowerStatus | 1.3.6.1.4.1.2736.1.1.17.3.1.7 | integer | read-only |
Power Status : Searching/Delivering Power/DC Disconnect/Over Power Enumeration: 'overPower': 3, 'dcDisconnect': 2, 'searching': 0, 'disable': 4, 'deliveringPower': 1. |
| ewnPoEPowerDeviceClass | 1.3.6.1.4.1.2736.1.1.17.3.1.8 | integer | read-only |
Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute pethPsePortDetectionStatus is reporting the enumeration deliveringPower. Enumeration: 'na': 6, 'class4': 5, 'class2': 3, 'class3': 4, 'class0': 1, 'class1': 2. |
| ewnPoEPowerCurrent | 1.3.6.1.4.1.2736.1.1.17.3.1.9 | displaystring | read-only |
Power Current : Measured usage current expressed in Milliampere. |
| ewnPoEPowerConsumption | 1.3.6.1.4.1.2736.1.1.17.3.1.10 | displaystring | read-only |
Power Consumption : Measured usage power expressed in Watts. |
| ewnPoEExtendMode | 1.3.6.1.4.1.2736.1.1.17.3.1.11 | integer | read-write |
If the value of this object is enable(1), the speed of the port is forced to set at 10Mbps so the port can deliver long range data and power up to 250 meters (656ft). Enumeration: 'enable': 1, 'disable': 0. |
| ewnPoEPowerDelivery | 1.3.6.1.4.1.2736.1.1.17.3.1.12 | integer | read-write |
A value of twoPairs(0) indicates power is delivered over 2 pairs of RJ45 pins. A value of fourPairs(1) indicates power is delivered over 4 pairs of RJ45 pins. Enumeration: 'twoPairs': 0, 'fourPairs': 1. |
| ewnPoEForcePower | 1.3.6.1.4.1.2736.1.1.17.3.1.13 | integer | read-write |
A value of enable(1) indicates no PD detection is performed. Power is automatically injected. Enumeration: 'enable': 1, 'disable': 0. |
| ewnPoEWatchdogConfigTable | 1.3.6.1.4.1.2736.1.1.17.5 | no-access |
A table displays and controls the PoE watchdog function of PoE-enabled ports on the switch. The switch sends periodic ping ICMP echo request packets to monitor connected PoE devices (PD). |
|
| 1.3.6.1.4.1.2736.1.1.17.5.1 | no-access |
Each entry in this table contains PoE watchdog configuration information for a PoE-enabled interface. |
||
| ewnPoEWatchdogPortIndex | 1.3.6.1.4.1.2736.1.1.17.5.1.1 | interfaceindex | no-access |
The interface on which ICMP echo request packets are sent |
| ewnPoEWatchdogState | 1.3.6.1.4.1.2736.1.1.17.5.1.2 | integer | read-write |
Disable or enable PoE watchdog function on this interface. Enumeration: 'enable': 1, 'disable': 0. |
| ewnPoEWatchdogTargetAddress | 1.3.6.1.4.1.2736.1.1.17.5.1.3 | ipaddress | read-write |
IP address of the target to ping |
| ewnPoEWatchdogPingInterval | 1.3.6.1.4.1.2736.1.1.17.5.1.4 | integer | read-write |
Specifies how often ping test will be run. |
| ewnPoEWatchdogMaxFailures | 1.3.6.1.4.1.2736.1.1.17.5.1.5 | integer | read-write |
Specifies the maximum number of ping failures before determining the target is unreachable. |
| ewnPoEWatchdogAction | 1.3.6.1.4.1.2736.1.1.17.5.1.6 | integer | read-write |
Action should be done when the number of ICMP requests with no response exceeds ewnPoEWatchdogMaxFailures. Enumeration: 'powerOff': 2, 'powerCycle': 1, 'noAction': 0. |
| ewnPoEWatchdogStartupDelay | 1.3.6.1.4.1.2736.1.1.17.5.1.7 | integer | read-write |
Specifies the initial time to delay before starting the PoE watchdog at system startup. |
| ewnLog | 1.3.6.1.4.1.2736.1.1.18 | |||
| ewnLogObjects | 1.3.6.1.4.1.2736.1.1.18.1 | |||
| ewnLogServer | 1.3.6.1.4.1.2736.1.1.18.1.1 | |||
| ewnLogServerState | 1.3.6.1.4.1.2736.1.1.18.1.1.1 | truthvalue | read-write |
Indicates whether the remote log system is enabled. |
| ewnLogServerTable | 1.3.6.1.4.1.2736.1.1.18.1.1.2 | no-access |
A table storing the settings of remote syslog servers. |
|
| 1.3.6.1.4.1.2736.1.1.18.1.1.2.1 | no-access |
An entry describing the characteristics of a remote syslog server. |
||
| ewnLogServerAddress | 1.3.6.1.4.1.2736.1.1.18.1.1.2.1.1 | ipaddress | no-access |
The IP address of the SYSLOG server to which log messages are to be sent. A value of 0.0.0.0 indicates no server address is configured. |
| ewnLogServerRowStatus | 1.3.6.1.4.1.2736.1.1.18.1.1.2.1.2 | rowstatus | read-only |
Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' are supported. |
| ewnLogHistory | 1.3.6.1.4.1.2736.1.1.18.1.3 | |||
| ewnLogHistoryTable | 1.3.6.1.4.1.2736.1.1.18.1.3.3 | no-access |
A table of syslog messages generated by this device. All 'interesting' syslog messages (i.e. severity <= ewnLogHistTableMaxSeverity) are entered into this table. |
|
| 1.3.6.1.4.1.2736.1.1.18.1.3.3.1 | no-access |
A syslog message that was previously generated by this device. Each entry is indexed by a message index. |
||
| ewnLogHistIndex | 1.3.6.1.4.1.2736.1.1.18.1.3.3.1.1 | integer32 | no-access |
A monotonically increasing integer for the sole purpose of indexing messages. When it reaches the maximum value the agent flushes the table and wraps the value back to 1. |
| ewnLogHistFacility | 1.3.6.1.4.1.2736.1.1.18.1.3.3.1.2 | displaystring | read-only |
Name of the facility that generated this message. For example: 'SYS'. |
| ewnLogHistMsgSeverity | 1.3.6.1.4.1.2736.1.1.18.1.3.3.1.3 | ewnlogseverity | read-only |
The severity of the message. |
| ewnLogHistMsgText | 1.3.6.1.4.1.2736.1.1.18.1.3.3.1.4 | displaystring | read-only |
The text of the message. If the text of the message exceeds 160 bytes, the message will be truncated to 160 bytes and a '*' character will be appended - indicating that the message has been truncated. |
| ewnLogHistTimestamp | 1.3.6.1.4.1.2736.1.1.18.1.3.3.1.5 | timestamp | read-only |
The value of sysUpTime when this message was generated. |
| ewnAlarm | 1.3.6.1.4.1.2736.1.1.19 | |||
| ewnPTP | 1.3.6.1.4.1.2736.1.1.20 | |||
| ewnPowerSupply | 1.3.6.1.4.1.2736.1.1.21 | |||
| ewnPowerSupplyTable | 1.3.6.1.4.1.2736.1.1.21.1 | no-access |
A table containing information of power supply status of the device. |
|
| 1.3.6.1.4.1.2736.1.1.21.1.1 | no-access |
Entry containing status of a power supply. |
||
| ewnPowerSupplyIndex | 1.3.6.1.4.1.2736.1.1.21.1.1.1 | integer32 | read-only |
Index to the ewnPowerSupplyTable. |
| ewnPowerSupplyName | 1.3.6.1.4.1.2736.1.1.21.1.1.2 | displaystring | read-only |
Name of a power supply, e.g. Power1, Power2. |
| ewnPowerSupplyAlarmEnable | 1.3.6.1.4.1.2736.1.1.21.1.1.3 | integer | read-write |
Individual power alarms can be enabled/disabled by this property. Enumeration: 'enable': 0, 'disable': 1. |
| ewnPowerSupplyStatus | 1.3.6.1.4.1.2736.1.1.21.1.1.4 | integer | read-only |
Status of a power supply. Enumeration: 'down': 1, 'up': 0. |
| ewnSwitchMMIBGroups | 1.3.6.1.4.1.2736.1.2 | |||
| ewnSystemMIBGroup | 1.3.6.1.4.1.2736.1.2.1 |
A collection of objects for System infomation. |
||
| ewnPortMIBGroup | 1.3.6.1.4.1.2736.1.2.2 |
A collection of objects for port infomation. |
||
| ewnMirrorMIBGroup | 1.3.6.1.4.1.2736.1.2.3 |
A collection of objects for port mirror infomation. |
||
| ewnTrunkMIBGroup | 1.3.6.1.4.1.2736.1.2.4 |
A collection of objects for port trunking infomation. |
||
| ewnBridgeMIBGroup | 1.3.6.1.4.1.2736.1.2.6 |
A collection of objects for bridge infomation. |
||
| ewnIGMPMIBGroup | 1.3.6.1.4.1.2736.1.2.7 |
A collection of objects for port IGMP infomation. |
||
| ewnVLANMIBGroup | 1.3.6.1.4.1.2736.1.2.8 |
A collection of objects for VLAN infomation. |
||
| ewnQoSMIBGroup | 1.3.6.1.4.1.2736.1.2.9 |
A collection of objects for QoS infomation. |
||
| ewnSNMPMIBGroup | 1.3.6.1.4.1.2736.1.2.10 |
A collection of objects for SNMP infomation. |
||
| ewnSDBMIBGroup | 1.3.6.1.4.1.2736.1.2.11 |
A collection of objects for MAC entry database infomation. |
||
| ewnRedundancyMIBGroup | 1.3.6.1.4.1.2736.1.2.14 |
A collection of objects for switch redundancy infomation. |
||
| ewnVDSLMIBGroup | 1.3.6.1.4.1.2736.1.2.16 |
A collection of objects for VDSL port infomation. |
||
| ewnPoEMIBGroup | 1.3.6.1.4.1.2736.1.2.17 |
A collection of objects for PoE infomation. |
||
| ewnLogGroup | 1.3.6.1.4.1.2736.1.2.18 |
A collection of objects for Log infomation. |
||
| ewnSystemMIBGroupV6 | 1.3.6.1.4.1.2736.1.2.19 |
A collection of objects for System infomation. |
||
| ewnSensorMIBGroup | 1.3.6.1.4.1.2736.1.2.20 |
A collection of objects for sensor/digital input infomation. |
||
| ewnNotificationsGroup | 1.3.6.1.4.1.2736.1.2.100 |
The notifications implemented by EtherWAN. |
||