EXTREME-VLAN-MIB: View SNMP OID List / Download MIB

VENDOR: EXTREME NETWORKS


 Home MIB: EXTREME-VLAN-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, EXTREME-BASE-MIB, SNMPv2-TC, EXTREME-SYSTEM-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 extremeVlan 1.3.6.1.4.1.1916.1.2
Extreme Virtual LAN objects
     extremeVlanGroup 1.3.6.1.4.1.1916.1.2.1
         extremeVlanGlobalMappingTable 1.3.6.1.4.1.1916.1.2.1.1 no-access
This table lists VLAN interfaces that are globally identified. A single entry exists in this list for each VLAN interface in the system that is bound to a global identifier.
             extremeVlanGlobalMappingEntry 1.3.6.1.4.1.1916.1.2.1.1.1 no-access
An individual VLAN interface global mapping entry. Entries in this table are created by setting the extremeVlanIfGlobalIdentifier object in the extremeVlanIfTable to a non-zero value.
                 extremeVlanGlobalMappingIdentifier 1.3.6.1.4.1.1916.1.2.1.1.1.1 integer read-only
An index into the extremeVlanGlobalMappingTable and an administratively assigned global VLAN identifier. The value of this object globally identifies the VLAN interface. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same.
                 extremeVlanGlobalMappingIfIndex 1.3.6.1.4.1.1916.1.2.1.1.1.2 integer read-only
The value of extremeVlanIfIndex for the VLAN interface in the extremeVlanIfTable, which is bound to the global identifier specified by this entry.
         extremeVlanIfTable 1.3.6.1.4.1.1916.1.2.1.2 no-access
This table lists VLAN interfaces that exist within a device. A single entry exists in this list for each VLAN interface in the system. A VLAN interface may be created, destroyed and/or mapped to a globally identified vlan.
             extremeVlanIfEntry 1.3.6.1.4.1.1916.1.2.1.2.1 no-access
An individual VLAN interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does not match the current value returned from the extremeNextAvailableVirtIfIndex object.
                 extremeVlanIfIndex 1.3.6.1.4.1.1916.1.2.1.2.1.1 integer read-only
The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object.
                 extremeVlanIfDescr 1.3.6.1.4.1.1916.1.2.1.2.1.2 displaystring read-only
This is a description of the VLAN interface.
                 extremeVlanIfType 1.3.6.1.4.1.1916.1.2.1.2.1.3 extremevlantype read-only
The VLAN interface type.
                 extremeVlanIfGlobalIdentifier 1.3.6.1.4.1.1916.1.2.1.2.1.4 integer read-only
An administratively assigned global VLAN identifier. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same. The binding between a global identifier and a VLAN interface can be created or removed. To create a binding an NMS must write a non-zero value to this object. To delete a binding, the NMS must write a zero to this object. The value 1 is reserved for the default VLAN and this cannot be deleted or re-assigned.
                 extremeVlanIfStatus 1.3.6.1.4.1.1916.1.2.1.2.1.6 rowstatus read-only
The status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInService(2) notReady(3). Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request. Setting this object to createAndWait(5) causes a row in this table to be created. The agent sets the status to notInService(2) if all of the information is present in the row and the values are acceptable to the agent; otherwise, the agent sets the status to notReady(3). Setting this object to active(1) is only valid when the current status is active(1) or notInService(2). When the state of the row transitions is set to active(1), the agent creates the corresponding row in the ifTable. Setting this object to destroy(6) will remove the corresponding VLAN interface, remove the entry in this table, and the corresponding entries in the extremeVlanGlobalMappingTable and the ifTable. In order for a set of this object to destroy(6) to succeed, all dependencies on this row must have been removed. These will include any stacking dependencies in the ifStackTable and any protocol specific tables dependencies.
                 extremeVlanIfIgnoreStpFlag 1.3.6.1.4.1.1916.1.2.1.2.1.7 truthvalue read-write
Enable/disable STP for this VLAN interface. Setting this object to true will cause the ports on this VLAN to ignore STP BPDUs. When a vlan is first created, the Default value is FALSE, which means that the VLAN uses STP port information
                 extremeVlanIfIgnoreBpduFlag 1.3.6.1.4.1.1916.1.2.1.2.1.8 truthvalue read-write
Setting this object to true causes this VLAN's BPDU's to be ignored by the Spanning Tree process. This can be used to keep the root bridge within one's own network when external switches also fall within the same Spanning Tree Domain. When a vlan is first created, the Default value is FALSE.
                 extremeVlanIfLoopbackModeFlag 1.3.6.1.4.1.1916.1.2.1.2.1.9 truthvalue read-write
Setting this object to true causes loopback mode to be enabled on this VLAN.
                 extremeVlanIfVlanId 1.3.6.1.4.1.1916.1.2.1.2.1.10 integer read-only
The VLAN ID of this VLAN.
     extremeVirtualGroup 1.3.6.1.4.1.1916.1.2.2
         extremeNextAvailableVirtIfIndex 1.3.6.1.4.1.1916.1.2.2.1 integer read-only
The value of the next available virtual ifIndex. This object is used by an NMS to select an index value for row-creation in tables indexed by ifIndex. The current value of this object is changed to a new value when the current value is written to an agent's table, that is indexed by ifIndex. Row creation using the current value of this object, allocates a virtual ifIndex. Note the following: 1. A newly created row does not have to be active(1) for the agent to allocate the virtual ifIndex. 2. Race conditions between multiple NMS's end when a row is created. Rows are deemed created when a setRequest is successfully committed (i.e. the errorStats is noError(0)). 3. An agent that exhausts its supply of virual ifIndex values returns zero as the value of this object. This can be used by an NMS as an indication to deleted unused rows and reboot the device.
     extremeEncapsulationGroup 1.3.6.1.4.1.1916.1.2.3
         extremeVlanEncapsIfTable 1.3.6.1.4.1.1916.1.2.3.1 no-access
This table lists VLAN encapsulation interfaces that exist within a device. A single entry exists in this list for each VLAN encapsulation interface in the system. A VLAN encapsulation interface may be created or destroyed.
             extremeVlanEncapsIfEntry 1.3.6.1.4.1.1916.1.2.3.1.1 no-access
An individual VLAN encapsulation interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does not match the current value returned from the extremeNextAvailableVirtIfIndex object.
                 extremeVlanEncapsIfIndex 1.3.6.1.4.1.1916.1.2.3.1.1.1 integer read-only
The index value of this row and the encapsulation interface's ifIndex in the ifTable. The NMS obtains the index value used for creating a row in this table by reading the extremeNextAvailableVirtIfIndex object.
                 extremeVlanEncapsIfType 1.3.6.1.4.1.1916.1.2.3.1.1.2 extremevlanencapstype read-only
The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.
                 extremeVlanEncapsIfTag 1.3.6.1.4.1.1916.1.2.3.1.1.3 integer read-only
The tag used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.
                 extremeVlanEncapsIfStatus 1.3.6.1.4.1.1916.1.2.3.1.1.4 rowstatus read-only
The row status for this VLAN encapsulation interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notReady(3). In order for a row to become active, the NMS must set extremeVlanEncapsIfTagType and extremeVlanEncapsIfTag to some valid and consistent values. Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row, the agent will create the row and change the status to active(1). If any of the necessary objects are not available, or specify an invalid configuration, the row will not be created and the agent will return an appropriate error. Setting this object to createAndWait(5) causes a row in in this table to be created. If all necessary objects in the row have been assigned values and specify a valid configuration, the status of the row will be set to notInService(2); otherwise, the status will be set to notReady(3). This object may only be set to createAndGo(4) or createAndWait(5) if it does not exist. Setting this object to active(1) when the status is notInService(2) causes the agent to commit the row. Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to destroy(6) will remove the corresponding VLAN encapsulation interface, remove the entry in this table, and remove the corresponding entry in the ifTable. In order for a set of this object to destroy(6) to succeed, all dependencies on this row must have been removed. These will include any references to this interface in the ifStackTable.
     extremeVlanIpGroup 1.3.6.1.4.1.1916.1.2.4
         extremeVlanIpTable 1.3.6.1.4.1.1916.1.2.4.1 no-access
A list of IP VLAN interface information entries. Entries in this table are related to entries in the extremeVlanIfTable by using the same index.
             extremeVlanIpEntry 1.3.6.1.4.1.1916.1.2.4.1.1 no-access
A extremeVlanIpEntry contains layer 3 information about a particular IP VLAN interface.
                 extremeVlanIpNetAddress 1.3.6.1.4.1.1916.1.2.4.1.1.1 ipaddress read-only
The IP network number for the IP VLAN interface defined in the extremeVlanIfTable identified with the same index.
                 extremeVlanIpNetMask 1.3.6.1.4.1.1916.1.2.4.1.1.2 ipaddress read-only
The IP network mask corresponding to the IP Network address defined by extremeVlanIpIpNetAddress.
                 extremeVlanIpStatus 1.3.6.1.4.1.1916.1.2.4.1.1.3 rowstatus read-only
The status column for this IP VLAN entry. This object can be set to: active(1) createAndGo(4) destroy(6) The following values may be read: active(1) Setting this object to active(1) or createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the row creation request. Setting this object to createAndWait(5) is not supported. When the status changes to active(1), the agent applies the IP parmeters to the IP VLAN interface identified by the corresponding value of the extremeVlanIpIndex object. Setting this object to destroy(6) will remove the IP parmeters from the IP VLAN interface and remove the entry from this table.
                 extremeVlanIpForwardingState 1.3.6.1.4.1.1916.1.2.4.1.1.4 truthvalue read-only
Indicates whether the IP Forwarding on this Vlan is Enable or not. A true value indicates that the Vlan is Enable.
     extremeProtocolGroup 1.3.6.1.4.1.1916.1.2.5
         extremeVlanProtocolTable 1.3.6.1.4.1.1916.1.2.5.1 no-access
Table of defined combinations of protocol IDs that make up one protocol definition name. All members of one protocol definition share the same extremeVlanProtocolIndex. A given protocol ID may appear in the definition of just one protocol definition. This table will typically contain some default entries for popular protocols chosen by ExtremeWare.
             extremeVlanProtocolEntry 1.3.6.1.4.1.1916.1.2.5.1.1 no-access
One member protocol ID of a protocol definition.
                 extremeVlanProtocolIndex 1.3.6.1.4.1.1916.1.2.5.1.1.1 integer read-only
An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare).
                 extremeVlanProtocolIdIndex 1.3.6.1.4.1.1916.1.2.5.1.1.2 integer read-only
An index representing a particular protocol ID within a protocol grouping. A limited number of protocol IDs may be defined per extremeVlanProtocolIndex (up to 6 in ExtremeWare).
                 extremeVlanProtocolName 1.3.6.1.4.1.1916.1.2.5.1.1.3 displaystring read-only
A human-readable string representing this protocol. This string should be the same for all entries sharing a given extremeVlanProtocolIndex. A ExtremeVlanProtocolEntry with extremeVlanProtocolName of ANY represents a match on all protocols: this entry may not be modified.
                 extremeVlanProtocolDllEncapsType 1.3.6.1.4.1.1916.1.2.5.1.1.4 integer read-only
Represents the type of data-link encapsulation in which the extremeVlanProtocolId protocol ID is carried. The value any(1) is used to indicate a wildcard and matches all encapsulations and protocol IDs that are not explicitly mentioned in this table. Entries of type any(1) may not be created. The value none(5) is used to indicate that no protocol IDs match this entry. A value of none(5) may not be set by a manager. Enumeration: 'llc': 3, 'ethertype': 2, 'none': 5, 'any': 1, 'llcSnapEthertype': 4.
                 extremeVlanProtocolId 1.3.6.1.4.1.1916.1.2.5.1.1.5 integer read-only
The protocol ID: for entries of type ethertype(2) or llcSnapEthertype(4) this represents a 16-bit protocol ID. For entries of type llc(3) it represents a concatenation of LLC DSAP+SSAP in network byte order. This value is not valid for extremeVlanProtocolDllEncapsType values of any(1) or none(5).
                 extremeVlanProtocolStatus 1.3.6.1.4.1.1916.1.2.5.1.1.6 rowstatus read-only
The row status variable, used according to row installation and removal conventions.
         extremeVlanProtocolVlanTable 1.3.6.1.4.1.1916.1.2.5.2 no-access
Table to apply one of the protocol definitions in extremeVlanProtocolTable to a given VLAN This applies to all ports that are untagged in this VLAN). A limited number of protocols may be applied simultaneously in one device (up to 8 in ExtremeWare).
             extremeVlanProtocolVlanEntry 1.3.6.1.4.1.1916.1.2.5.2.1 no-access
A mapping of untagged packets of one protocol onto a particular VLAN.
                 extremeVlanProtocolVlanIfIndex 1.3.6.1.4.1.1916.1.2.5.2.1.1 integer read-only
The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object.
                 extremeVlanProtocolVlanProtocolIndex 1.3.6.1.4.1.1916.1.2.5.2.1.2 integer read-only
An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare).
                 extremeVlanProtocolVlanStatus 1.3.6.1.4.1.1916.1.2.5.2.1.3 rowstatus read-only
The row status variable, used according to row installation and removal conventions.
     extremeVlanOpaqueGroup 1.3.6.1.4.1.1916.1.2.6
         extremeVlanOpaqueTable 1.3.6.1.4.1.1916.1.2.6.1 no-access
This table lists the ports associated with each VLAN interface.
             extremeVlanOpaqueEntry 1.3.6.1.4.1.1916.1.2.6.1.1 no-access
This represents the tagged and untagged ports on each slot per vlan.
                 extremeVlanOpaqueTaggedPorts 1.3.6.1.4.1.1916.1.2.6.1.1.1 portlist read-only
Each bit in the octet string represents one port. A 1 means that the port is a tagged port in that vlan. The bit value for a port is 0 otherwise.
                 extremeVlanOpaqueUntaggedPorts 1.3.6.1.4.1.1916.1.2.6.1.1.2 portlist read-only
Each bit in the octet string represents one port. A 1 means that the port is an untagged port in that vlan. The bit value for a port is 0 otherwise.
     extremeVlanStackGroup 1.3.6.1.4.1.1916.1.2.7
         extremeVlanStackTable 1.3.6.1.4.1.1916.1.2.7.1 no-access
Represents those components of the ifStackTable that do not contain a Physical interface.
             extremeVlanStackEntry 1.3.6.1.4.1.1916.1.2.7.1.1 no-access
Each entry in this read-only table defines which interfaces are on top of which one. All information in the table is also contained in ifStackTable. The Physical interfaces in the ifStackTable are not represented here.
                 extremeVlanStackHigherLayer 1.3.6.1.4.1.1916.1.2.7.1.1.1 integer read-only
The higher layer in the logical vlan hierarchy.
                 extremeVlanStackLowerLayer 1.3.6.1.4.1.1916.1.2.7.1.1.2 integer read-only
The lower layer in the logical vlan hierarchy.
     extremeVlanStatsGroup 1.3.6.1.4.1.1916.1.2.8
         extremeVlanL2StatsTable 1.3.6.1.4.1.1916.1.2.8.1 no-access
This tables contains per-VLAN layer 2 statistics information.
             extremeVlanL2StatsEntry 1.3.6.1.4.1.1916.1.2.8.1.1 no-access
                 extremeVlanL2StatsIfDescr 1.3.6.1.4.1.1916.1.2.8.1.1.1 displaystring read-only
This is a description(name) of the VLAN.
                 extremeVlanL2StatsPktsToCpu 1.3.6.1.4.1.1916.1.2.8.1.1.2 counter64 read-only
The total number of packets of this VLAN sent to the CPU.
                 extremeVlanL2StatsPktsLearnt 1.3.6.1.4.1.1916.1.2.8.1.1.3 counter64 read-only
The total number of packets learnt on this VLAN.
                 extremeVlanL2StatsIgmpCtrlPktsSnooped 1.3.6.1.4.1.1916.1.2.8.1.1.4 counter64 read-only
The total number of IGMP control packets snooped on this VLAN.
                 extremeVlanL2StatsIgmpDataPktsSwitched 1.3.6.1.4.1.1916.1.2.8.1.1.5 counter64 read-only
The total number of IGMP data packets switched on this VLAN.
     extremeVlanAggregationGroup 1.3.6.1.4.1.1916.1.2.9
         extremeVlanAggregationTable 1.3.6.1.4.1.1916.1.2.9.1 no-access
This table contains the VLAN aggregation information.
             extremeVlanAggregationEntry 1.3.6.1.4.1.1916.1.2.9.1.1 no-access
Information about the individual VLAN aggregation entry.
                 extremeVlanAggregationSuperVlanIfIndex 1.3.6.1.4.1.1916.1.2.9.1.1.1 integer read-only
The Super Vlan index for this entry.
                 extremeVlanAggregationSubVlanIfIndex 1.3.6.1.4.1.1916.1.2.9.1.1.2 integer read-only
The Sub Vlan index for this entry.
                 extremeVlanAggregationSubVlanStartIpNetAddress 1.3.6.1.4.1.1916.1.2.9.1.1.3 ipaddress read-only
This represents the start network address of the IP range.
                 extremeVlanAggregationSubVlanStartIpNetMask 1.3.6.1.4.1.1916.1.2.9.1.1.4 ipaddress read-only
This represents the start network address mask of the IP range
                 extremeVlanAggregationSubVlanEndIpNetAddress 1.3.6.1.4.1.1916.1.2.9.1.1.5 ipaddress read-only
This represents the end network address of the IP range.
                 extremeVlanAggregationSubVlanEndIpNetMask 1.3.6.1.4.1.1916.1.2.9.1.1.6 ipaddress read-only
This represents the end network address mask of the IP range.
                 extremeVlanAggregationStatus 1.3.6.1.4.1.1916.1.2.9.1.1.7 rowstatus read-only
The status of this entry.
         extremeVlanAggregationConfigTable 1.3.6.1.4.1.1916.1.2.9.2 no-access
This table contains the sub VLAN proxy setting information.
             extremeVlanAggregationConfigEntry 1.3.6.1.4.1.1916.1.2.9.2.1 no-access
Information about the individual VLAN aggregation entry.
                 extremeVlanAggregationConfigSuperVlanIfIndex 1.3.6.1.4.1.1916.1.2.9.2.1.1 integer read-only
The Super Vlan index for this entry.
                 extremeVlanAggregationConfigSubVlanProxyEnable 1.3.6.1.4.1.1916.1.2.9.2.1.2 truthvalue read-only
The boolean flag that prevents normal communication between sub vlans.
     extremeVlanTranslationGroup 1.3.6.1.4.1.1916.1.2.10
           extremeVlanTranslationTable 1.3.6.1.4.1.1916.1.2.10.1 no-access
This table contains the VLAN translation information.
               extremeVlanTranslationEntry 1.3.6.1.4.1.1916.1.2.10.1.1 no-access
Information about the individual VLAN translation entry.
                   extremeVlanTranslationSuperVlanIfIndex 1.3.6.1.4.1.1916.1.2.10.1.1.1 integer read-only
The Super Vlan index for this entry.
                   extremeVlanTranslationMemberVlanIfIndex 1.3.6.1.4.1.1916.1.2.10.1.1.2 integer read-only
The member Vlan index for this entry.
                   extremeVlanTranslationStatus 1.3.6.1.4.1.1916.1.2.10.1.1.3 rowstatus read-only
The status of this entry.