ES3510MA-MIB: View SNMP OID List / Download MIB

VENDOR: ACCTON TECHNOLOGY


 Home MIB: ES3510MA-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 accton 1.3.6.1.4.1.259
         edgecore 1.3.6.1.4.1.259.8
             cheetahSwitchMgt 1.3.6.1.4.1.259.8.1
                 es3510maMIB 1.3.6.1.4.1.259.8.1.11
The MIB module for ES3510MA.
                       es3510maMIBObjects 1.3.6.1.4.1.259.8.1.11.1
                           switchMgt 1.3.6.1.4.1.259.8.1.11.1.1
                               switchNumber 1.3.6.1.4.1.259.8.1.11.1.1.2 integer32 read-only
The total number of switches present on this system.
                               switchInfoTable 1.3.6.1.4.1.259.8.1.11.1.1.3 no-access
Table of descriptive and status information about the switch units in this system.
                                   switchInfoEntry 1.3.6.1.4.1.259.8.1.11.1.1.3.1 no-access
Table providing descriptions and status information for switch units.
                                       swUnitIndex 1.3.6.1.4.1.259.8.1.11.1.1.3.1.1 integer32 no-access
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
                                       swHardwareVer 1.3.6.1.4.1.259.8.1.11.1.1.3.1.2 displaystring read-only
Hardware version of the main board.
                                       swMicrocodeVer 1.3.6.1.4.1.259.8.1.11.1.1.3.1.3 displaystring read-only
Microcode version of the main board.
                                       swLoaderVer 1.3.6.1.4.1.259.8.1.11.1.1.3.1.4 displaystring read-only
Loader version of the main board.
                                       swBootRomVer 1.3.6.1.4.1.259.8.1.11.1.1.3.1.5 displaystring read-only
Boot ROM code version of the main board.
                                       swOpCodeVer 1.3.6.1.4.1.259.8.1.11.1.1.3.1.6 displaystring read-only
Operation code version of the main board.
                                       swPortNumber 1.3.6.1.4.1.259.8.1.11.1.1.3.1.7 integer32 read-only
The number of ports on this switch.
                                       swPowerStatus 1.3.6.1.4.1.259.8.1.11.1.1.3.1.8 integer read-only
Indicates the switch using internalPower(1), redundantPower(2) or both(3) Enumeration: 'internalAndRedundantPower': 3, 'internalPower': 1, 'redundantPower': 2.
                                       swRoleInSystem 1.3.6.1.4.1.259.8.1.11.1.1.3.1.9 integer read-only
Indicates the switch is master(1), backupMaster(2) or slave(3) in this system. Enumeration: 'backupMaster': 2, 'master': 1, 'slave': 3.
                                       swSerialNumber 1.3.6.1.4.1.259.8.1.11.1.1.3.1.10 displaystring read-only
Serial number of the switch.
                                       swServiceTag 1.3.6.1.4.1.259.8.1.11.1.1.3.1.13 displaystring read-only
Service tag serial-number of the switch.
                                       swModelNumber 1.3.6.1.4.1.259.8.1.11.1.1.3.1.14 displaystring read-only
Model number of the switch.
                                       swEpldVer 1.3.6.1.4.1.259.8.1.11.1.1.3.1.15 displaystring read-only
The EPLD version of the switch.
                               switchOperState 1.3.6.1.4.1.259.8.1.11.1.1.4 integer read-only
Global operation state of the switch. Enumeration: 'ok': 3, 'unknown': 2, 'other': 1, 'critical': 5, 'noncritical': 4, 'nonrecoverable': 6.
                               switchProductId 1.3.6.1.4.1.259.8.1.11.1.1.5
                                   swProdName 1.3.6.1.4.1.259.8.1.11.1.1.5.1 displaystring read-only
The product name of this switch.
                                   swProdManufacturer 1.3.6.1.4.1.259.8.1.11.1.1.5.2 displaystring read-only
The product manufacturer of this switch.
                                   swProdDescription 1.3.6.1.4.1.259.8.1.11.1.1.5.3 displaystring read-only
The product description of this switch.
                                   swProdVersion 1.3.6.1.4.1.259.8.1.11.1.1.5.4 displaystring read-only
The runtime code version of this switch.
                                   swProdUrl 1.3.6.1.4.1.259.8.1.11.1.1.5.5 displaystring read-only
The URL of this switch, which we can connect through a web browser.
                                   swIdentifier 1.3.6.1.4.1.259.8.1.11.1.1.5.6 integer32 read-only
A unique identifier of which switch in the chassis is currently being looked at.
                                   swChassisServiceTag 1.3.6.1.4.1.259.8.1.11.1.1.5.7 displaystring read-only
The service tag of the chassis this switch resides in.
                               switchIndivPowerTable 1.3.6.1.4.1.259.8.1.11.1.1.6 no-access
Table about the status of individual powers.
                                   switchIndivPowerEntry 1.3.6.1.4.1.259.8.1.11.1.1.6.1 no-access
Table about the status of individual power.
                                       swIndivPowerUnitIndex 1.3.6.1.4.1.259.8.1.11.1.1.6.1.1 integer32 no-access
This is defined as swUnitIndex.
                                       swIndivPowerIndex 1.3.6.1.4.1.259.8.1.11.1.1.6.1.2 integer no-access
1 means internal power, 2 means external power. Enumeration: 'internalPower': 1, 'externalPower': 2.
                                       swIndivPowerStatus 1.3.6.1.4.1.259.8.1.11.1.1.6.1.3 integer read-only
notPresent(1) means not present, green(2) means up, red(3) means down. Enumeration: 'notPresent': 1, 'green': 2, 'red': 3.
                               switchJumboFrameStatus 1.3.6.1.4.1.259.8.1.11.1.1.7 integer read-write
enable(1) means the Jumbo Frame has enabled, disabled(2) means the Jumbo Frame has disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                               amtrMgt 1.3.6.1.4.1.259.8.1.11.1.1.8
                                   amtrMacAddrAgingStatus 1.3.6.1.4.1.259.8.1.11.1.1.8.3 enabledstatus read-write
If this is enabled(1), the MAC address table will age out according to its timer. If this is disabled(2), the MAC address table will not age out.
                               switchRenumberUnitID 1.3.6.1.4.1.259.8.1.11.1.1.14 integer read-write
The value renumber will automatically assign an ID to units in the stack; all UNIT IDs will be contiguous. The system configurations are not changed but the system will restart after renumbering is completed. Enumeration: 'noRenumber': 2, 'renumber': 1.
                               switchPDPowerSourceCheck 1.3.6.1.4.1.259.8.1.11.1.1.21 truthvalue read-write
A value of true(1) will enable the power souce check. A value of false(2) will disable the power souce check.
                           portMgt 1.3.6.1.4.1.259.8.1.11.1.2
                               portTable 1.3.6.1.4.1.259.8.1.11.1.2.1 no-access
Table of descriptive and status information describing the configuration of each switch port. This table also contains information about each trunk.
                                   portEntry 1.3.6.1.4.1.259.8.1.11.1.2.1.1 no-access
An entry in the table, describing the configuration of one switch port or trunk.
                                       portIndex 1.3.6.1.4.1.259.8.1.11.1.2.1.1.1 interfaceindex no-access
The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                       portName 1.3.6.1.4.1.259.8.1.11.1.2.1.1.2 displaystring read-write
The name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later).
                                       portType 1.3.6.1.4.1.259.8.1.11.1.2.1.1.3 integer read-only
Indicates the port type of the configuration of the switch. Enumeration: 'hundredBaseFX': 3, 'thousandBaseGBIC': 7, 'thousandBaseLX': 5, 'hundredBaseTX': 2, 'tenG': 12, 'thousandBaseCX': 11, 'thousandBaseT': 6, 'hundredBaseFxScSingleMode': 9, 'thousandBaseSfp': 8, 'hundredBaseFxScMultiMode': 10, 'other': 1, 'thousandBaseSX': 4.
                                       portSpeedDpxCfg 1.3.6.1.4.1.259.8.1.11.1.2.1.1.4 integer read-write
Configures the speed and duplex mode for a port or trunk, according to: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode halfDuplex10g(8) - 10g and half duplex mode fullDuplex10g(9) - 10g and full duplex mode hundredBaseTX port can be set as: halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as: fullDuplex100(5) thousandBaseSX port can be set as: fullDuplex1000(7) thousandBaseLX port can be set as: fullDuplex1000(7) thousandBaseT port can be set as: halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) thousandBaseGBIC port can be set as: fullDuplex1000(7) thousandBaseSfp port can be set as: fullDuplex1000(7) hundredBaseFxScSingleMode port can be set as: fullDuplex100(5) hundredBaseFxScMultiMode port can be set as: fullDuplex100(5) thousandBaseCX port can be set as: fullDuplex1000(7) tenG port can be set as: halfDuplex10g(8) fullDuplex10g(9) The actual operating speed and duplex of the port is given by portSpeedDpxStatus. Enumeration: 'fullDuplex10g': 9, 'fullDuplex10': 3, 'halfDuplex1000': 6, 'reserved': 1, 'fullDuplex1000': 7, 'halfDuplex100': 4, 'halfDuplex10': 2, 'fullDuplex100': 5, 'halfDuplex10g': 8.
                                       portFlowCtrlCfg 1.3.6.1.4.1.259.8.1.11.1.2.1.1.5 integer read-write
(1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (5) Flow control mechanism is enabled with tx pause mechanism only. (6) Flow control mechansim is enabled with rx pause mechansim only. Fast ethernet ports can be set as: enabled(1), disabled(2). Gigabit ethernet ports can be set as: enabled(1), disabled(2), tx(5), rx(6). The actual flow control mechanism is used given by portFlowCtrlStatus. Enumeration: 'disabled': 2, 'enabled': 1, 'rx': 6, 'tx': 5.
                                       portCapabilities 1.3.6.1.4.1.259.8.1.11.1.2.1.1.6 bits read-write
Port or trunk capabilities. Bits: 'portCapSym': 14, 'reserved11': 11, 'reserved10': 10, 'reserved13': 13, 'reserved12': 12, 'portCap100full': 3, 'portCap10gFull': 7, 'portCap1000half': 4, 'portCap10half': 0, 'portCapFlowCtrl': 15, 'portCap10gHalf': 6, 'reserved9': 9, 'reserved8': 8, 'portCap1000full': 5, 'portCap10full': 1, 'portCap100half': 2.
                                       portAutonegotiation 1.3.6.1.4.1.259.8.1.11.1.2.1.1.7 enabledstatus read-write
Whether auto-negotiation is enabled.
                                       portSpeedDpxStatus 1.3.6.1.4.1.259.8.1.11.1.2.1.1.8 integer read-only
The operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the member ports have been inconsistently configured in which case the value is error(1). Enumeration: 'fullDuplex10g': 9, 'fullDuplex10': 3, 'halfDuplex1000': 6, 'fullDuplex100': 5, 'fullDuplex1000': 7, 'halfDuplex100': 4, 'halfDuplex10': 2, 'error': 1, 'halfDuplex10g': 8.
                                       portFlowCtrlStatus 1.3.6.1.4.1.259.8.1.11.1.2.1.1.9 integer read-only
(2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents a trunk and the member ports have been inconsistently configured then this value is error(1). Enumeration: 'none': 4, 'dot3xFlowControl': 3, 'backPressure': 2, 'error': 1.
                                       portTrunkIndex 1.3.6.1.4.1.259.8.1.11.1.2.1.1.10 integer32 read-only
The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to a trunk in the trunkIndex, defined by the corresponding trunkPorts.
                                       portComboForcedMode 1.3.6.1.4.1.259.8.1.11.1.2.1.1.12 integer read-write
This determines the running mode of a combo port. For a non-combo port, this variable has a value of none(1), and setting this variable to none(1) has no effect. For a combo port, this has its own valid values not equal to none(1), and setting this variable to none(1) is not allowed. copperForced(2) is set if user want to force this combo port running in copper mode. copperPreferredAuto(3) is obsoleted, and user shall not set this state. sfpForced(4) is set if user want to force this combo port running in fiber mode. sfpPreferredAuto(5) is set if user want to change copper or fiber mode automatically by SFP transceiver present state. If SFP transceiver is present, this combo port will run in fiber mode, and if SFP transceiver is not present, this combo port will run in copper mode. Enumeration: 'copperPreferredAuto': 3, 'sfpPreferredAuto': 5, 'none': 1, 'copperForced': 2, 'sfpForced': 4.
                                       portMasterSlaveModeCfg 1.3.6.1.4.1.259.8.1.11.1.2.1.1.15 integer read-write
Configures the PHY mode when auto negotiation is disabled and speed-duplex is 1000full for giga copper port. Enumeration: 'master': 1, 'slave': 2, 'auto': 3, 'autoPreferMaster': 4, 'autoPreferSlave': 5.
                                       portMacAddrLearningStatus 1.3.6.1.4.1.259.8.1.11.1.2.1.1.17 enabledstatus read-write
Set this variable to enabled(1) to start to learn MAC addresses. Set this variable to disabled(2) to stop to learn MAC addresses.
                                       portMacAddrLearningCount 1.3.6.1.4.1.259.8.1.11.1.2.1.1.18 counter32 read-only
The current number of learned MAC addresses.
                                       portUpTime 1.3.6.1.4.1.259.8.1.11.1.2.1.1.19 timeticks read-only
The port up time (in hundredths of a second).
                                       portShutdownReason 1.3.6.1.4.1.259.8.1.11.1.2.1.1.20 bits read-only
The reason of port shutdown. The value is 0 if no shutdown action is applied to this port. Bits: 'portSec': 5, 'networkAccessPortLinkDetection': 3, 'admin': 0, 'stpLbd': 1, 'atcBstorm': 7, 'udld': 9, 'atcMstorm': 8, 'lbd': 6, 'stpBpduGuard': 2, 'networkAccessPortDynamicQos': 4.
                               cableDiagMgt 1.3.6.1.4.1.259.8.1.11.1.2.3
                                   cableDiagCtlAction 1.3.6.1.4.1.259.8.1.11.1.2.3.1 integer32 read-write
To execute cable diagnostics on a port, assign cableDiagCtlAction to the value of ifIndex defined by the ifIndex in the IF-MIB. When read, this object always returns 0.
                                   cableDiagResultTable 1.3.6.1.4.1.259.8.1.11.1.2.3.2 no-access
Table for cable diagnostics result.
                                       cableDiagResultEntry 1.3.6.1.4.1.259.8.1.11.1.2.3.2.1 no-access
Entry for cable diagnostics result.
                                           cableDiagResultIfIndex 1.3.6.1.4.1.259.8.1.11.1.2.3.2.1.1 interfaceindex no-access
This is defined as the ifIndex.
                                           cableDiagResultStatusPairA 1.3.6.1.4.1.259.8.1.11.1.2.3.2.1.2 integer read-only
The result of cable diagnostics. Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack of continuity between pins at each end of the pair. Value short(4) means conductors are short-circuited together on the pair. Value impedanceMismatch(8) means different quality cables connected together. Value failed(9) means test failed. Value notSupported(10) means cable diagnostics is not supported. Value noCable(11) means there is no connected cable. Value underTesting(12) means cable diag is still running. Value unknown(7) means pair has an error matching none of the above. Enumeration: 'notTestedYet': 1, 'short': 4, 'ok': 2, 'impedanceMismatch': 8, 'unknown': 7, 'failed': 9, 'noCable': 11, 'underTesting': 12, 'notSupported': 10, 'open': 3.
                                           cableDiagResultStatusPairB 1.3.6.1.4.1.259.8.1.11.1.2.3.2.1.3 integer read-only
The result of cable diagnostics. Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack of continuity between pins at each end of the pair. Value short(4) means conductors are short-circuited together on the pair. Value impedanceMismatch(8) means different quality cables connected together. Value failed(9) means test failed. Value notSupported(10) means cable diagnostics is not supported. Value noCable(11) means there is no connected cable. Value underTesting(12) means cable diag is still running. Value unknown(7) means pair has an error matching none of the above. Enumeration: 'notTestedYet': 1, 'short': 4, 'ok': 2, 'impedanceMismatch': 8, 'unknown': 7, 'failed': 9, 'noCable': 11, 'underTesting': 12, 'notSupported': 10, 'open': 3.
                                           cableDiagResultStatusPairC 1.3.6.1.4.1.259.8.1.11.1.2.3.2.1.4 integer read-only
The result of cable diagnostics. Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack of continuity between pins at each end of the pair. Value short(4) means conductors are short-circuited together on the pair. Value impedanceMismatch(8) means different quality cables connected together. Value failed(9) means test failed. Value notSupported(10) means cable diagnostics is not supported. Value noCable(11) means there is no connected cable. Value underTesting(12) means cable diag is still running. Value unknown(7) means pair has an error matching none of the above. Enumeration: 'notTestedYet': 1, 'short': 4, 'ok': 2, 'impedanceMismatch': 8, 'unknown': 7, 'failed': 9, 'noCable': 11, 'underTesting': 12, 'notSupported': 10, 'open': 3.
                                           cableDiagResultStatusPairD 1.3.6.1.4.1.259.8.1.11.1.2.3.2.1.5 integer read-only
The result of cable diagnostics. Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack of continuity between pins at each end of the pair. Value short(4) means conductors are short-circuited together on the pair. Value impedanceMismatch(8) means different quality cables connected together. Value failed(9) means test failed. Value notSupported(10) means cable diagnostics is not supported. Value noCable(11) means there is no connected cable. Value underTesting(12) means cable diag is still running. Value unknown(7) means pair has an error matching none of the above. Enumeration: 'notTestedYet': 1, 'short': 4, 'ok': 2, 'impedanceMismatch': 8, 'unknown': 7, 'failed': 9, 'noCable': 11, 'underTesting': 12, 'notSupported': 10, 'open': 3.
                                           cableDiagResultDistancePairA 1.3.6.1.4.1.259.8.1.11.1.2.3.2.1.6 integer32 read-only
Displays the fault distance of pair A of the cable in meters. 0 will be displayed if cableDiagResultStatusPairA equals to Value underTesting(12).
                                           cableDiagResultDistancePairB 1.3.6.1.4.1.259.8.1.11.1.2.3.2.1.7 integer32 read-only
Displays the fault distance of pair B of the cable in meters. 0 will be displayed if cableDiagResultStatusPairB equals to Value underTesting(12).
                                           cableDiagResultDistancePairC 1.3.6.1.4.1.259.8.1.11.1.2.3.2.1.8 integer32 read-only
Displays the fault distance of pair C of the cable in meters. 0 will be displayed if cableDiagResultStatusPairC equals to Value underTesting(12).
                                           cableDiagResultDistancePairD 1.3.6.1.4.1.259.8.1.11.1.2.3.2.1.9 integer32 read-only
Displays the fault distance of pair D of the cable in meters. 0 will be displayed if cableDiagResultStatusPairD equals to Value underTesting(12).
                                           cableDiagResultTime 1.3.6.1.4.1.259.8.1.11.1.2.3.2.1.11 displaystring read-only
Displays the last time of cable diagnostics. For example, 'Jan 1 02:03:04 2002'.
                               loopbackTestMgt 1.3.6.1.4.1.259.8.1.11.1.2.4
                                   loopInternalCtlAction 1.3.6.1.4.1.259.8.1.11.1.2.4.1 integer32 read-write
To execute internal loopback test on a port, assign loopInternalCtlAction to the value of ifIndex defined by the ifIndex in the IF-MIB. When read, this object always returns 0.
                                   loopInternalResultTable 1.3.6.1.4.1.259.8.1.11.1.2.4.2 no-access
Table for internal loopback test result.
                                       loopInternalResultEntry 1.3.6.1.4.1.259.8.1.11.1.2.4.2.1 no-access
Entry for internal loopback test result.
                                           loopInternalResultIfIndex 1.3.6.1.4.1.259.8.1.11.1.2.4.2.1.1 interfaceindex no-access
This is defined as the ifIndex.
                                           loopInternalResultStatus 1.3.6.1.4.1.259.8.1.11.1.2.4.2.1.2 integer read-only
The result of internal loopback. Enumeration: 'failed': 3, 'notTestedYet': 1, 'succeeded': 2.
                                           loopInternalResultTime 1.3.6.1.4.1.259.8.1.11.1.2.4.2.1.3 displaystring read-only
Displays the last time of internal loopback. For example, 'Jan 1 02:03:04 2002'.
                               portUtilTable 1.3.6.1.4.1.259.8.1.11.1.2.6 no-access
Dispalys port utilization during recent 300 seconds.
                                   portUtilEntry 1.3.6.1.4.1.259.8.1.11.1.2.6.1 no-access
Dispalys port utilization during recent 300 seconds.
                                       portUtilIfIndex 1.3.6.1.4.1.259.8.1.11.1.2.6.1.1 interfaceindex no-access
The port and trunk interface of the portUtilTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.
                                       portInOctetRate 1.3.6.1.4.1.259.8.1.11.1.2.6.1.2 counter64 read-only
The input octet rate (kbits/sec) of the port.
                                       portInPacketRate 1.3.6.1.4.1.259.8.1.11.1.2.6.1.3 counter64 read-only
The input packet rate (pkts/sec) of the port.
                                       portInUtil 1.3.6.1.4.1.259.8.1.11.1.2.6.1.4 integer32 read-only
The input utilization of the port, in one per hundred.
                                       portOutOctetRate 1.3.6.1.4.1.259.8.1.11.1.2.6.1.5 counter64 read-only
The output octet rate (kbits/sec) of the port.
                                       portOutPacketRate 1.3.6.1.4.1.259.8.1.11.1.2.6.1.6 counter64 read-only
The output packet rate (pkts/sec) of the port.
                                       portOutUtil 1.3.6.1.4.1.259.8.1.11.1.2.6.1.7 integer32 read-only
The output utilization of the port, in one per hundred.
                               portVlanTrunkingTable 1.3.6.1.4.1.259.8.1.11.1.2.7 no-access
Configures vlan trunking feature.
                                   portVlanTrunkingEntry 1.3.6.1.4.1.259.8.1.11.1.2.7.1 no-access
Configures vlan trunking feature.
                                       portVlanTrunkingIfIndex 1.3.6.1.4.1.259.8.1.11.1.2.7.1.1 interfaceindex no-access
The port and trunk interface of the portVlanTrunkingTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.
                                       portVlanTrunkingStatus 1.3.6.1.4.1.259.8.1.11.1.2.7.1.2 enabledstatus read-write
Whether vlan trunking is enabled.
                               portHist 1.3.6.1.4.1.259.8.1.11.1.2.8
                                   portHistControlTable 1.3.6.1.4.1.259.8.1.11.1.2.8.1 no-access
A list of history control entries.
                                       portHistControlEntry 1.3.6.1.4.1.259.8.1.11.1.2.8.1.1 no-access
A list of parameters that set up a periodic sampling of statistics.
                                           portHistControlIndex 1.3.6.1.4.1.259.8.1.11.1.2.8.1.1.1 integer32 read-only
An index that uniquely identifies an entry in the portHistControl table.
                                           portHistControlName 1.3.6.1.4.1.259.8.1.11.1.2.8.1.1.2 displaystring read-only
A textual name of the entity. It is mandatory that this only contain printable ASCII characters.
                                           portHistControlDataSource 1.3.6.1.4.1.259.8.1.11.1.2.8.1.1.3 interfaceindex read-only
This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this portHistControlEntry. This source can be any interface on this device.
                                           portHistControlInterval 1.3.6.1.4.1.259.8.1.11.1.2.8.1.1.4 integer32 read-only
The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this portHistControlEntry. This interval can be set to any number of seconds between 1 and 86400 (1 day).
                                           portHistControlBucketsRequested 1.3.6.1.4.1.259.8.1.11.1.2.8.1.1.5 integer32 read-only
The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this portHistControlEntry.
                                           portHistControlBucketsGranted 1.3.6.1.4.1.259.8.1.11.1.2.8.1.1.6 integer32 read-only
The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this portHistControlEntry.
                                           portHistControlStatus 1.3.6.1.4.1.259.8.1.11.1.2.8.1.1.7 rowstatus read-only
The status of this portHistControl entry.
                                   portHistCurrentTable 1.3.6.1.4.1.259.8.1.11.1.2.8.2 no-access
A list of Ethernet history entries.
                                       portHistCurrentEntry 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1 no-access
An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the portHistControlEntry which set up the parameters for a regular collection of these samples.
                                           portHistCurrentIndex 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.1 integer32 read-only
The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of portHistControlIndex.
                                           portHistCurrentSampleIndex 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.2 integer32 read-only
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same portHistControlEntry. This index starts at 1 and increases by one as each new sample is taken.
                                           portHistCurrentIntervalStart 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.3 timeticks read-only
The value of sysUpTime at the start of the interval over which this sample was measured.
                                           portHistCurrentInOctets 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.4 counter64 read-only
The total number of octets received on the interface, including framing characters.
                                           portHistCurrentInUcastPkts 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.5 counter64 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.
                                           portHistCurrentInMulticastPkts 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.6 counter64 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses.
                                           portHistCurrentInBroadcastPkts 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.7 counter64 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.
                                           portHistCurrentInDiscards 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.8 counter64 read-only
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
                                           portHistCurrentInErrors 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.9 counter64 read-only
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol.
                                           portHistCurrentInUnknownProtos 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.10 counter64 read-only
For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface that does not support protocol multiplexing, this counter will always be 0.
                                           portHistCurrentOutOctets 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.11 counter64 read-only
The total number of octets transmitted out of the interface, including framing characters.
                                           portHistCurrentOutUcastPkts 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.12 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.
                                           portHistCurrentOutMulticastPkts 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.13 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses.
                                           portHistCurrentOutBroadcastPkts 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.14 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.
                                           portHistCurrentOutDiscards 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.15 counter64 read-only
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
                                           portHistCurrentOutErrors 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.16 counter64 read-only
For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors.
                                           portHistCurrentInUtilization 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.17 integer32 read-only
The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.
                                           portHistCurrentOutUtilization 1.3.6.1.4.1.259.8.1.11.1.2.8.2.1.18 integer32 read-only
The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.
                                   portHistPreviousTable 1.3.6.1.4.1.259.8.1.11.1.2.8.3 no-access
A list of Ethernet history entries.
                                       portHistPreviousEntry 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1 no-access
An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the portHistControlEntry which set up the parameters for a regular collection of these samples.
                                           portHistPreviousIndex 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.1 integer32 read-only
The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of portHistControlIndex.
                                           portHistPreviousSampleIndex 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.2 integer32 read-only
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same portHistControlEntry. This index starts at 1 and increases by one as each new sample is taken.
                                           portHistPreviousIntervalStart 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.3 timeticks read-only
The value of sysUpTime at the start of the interval over which this sample was measured.
                                           portHistPreviousInOctets 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.4 counter64 read-only
The total number of octets received on the interface, including framing characters.
                                           portHistPreviousInUcastPkts 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.5 counter64 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.
                                           portHistPreviousInMulticastPkts 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.6 counter64 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses.
                                           portHistPreviousInBroadcastPkts 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.7 counter64 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.
                                           portHistPreviousInDiscards 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.8 counter64 read-only
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
                                           portHistPreviousInErrors 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.9 counter64 read-only
For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol.
                                           portHistPreviousInUnknownProtos 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.10 counter64 read-only
For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface that does not support protocol multiplexing, this counter will always be 0.
                                           portHistPreviousOutOctets 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.11 counter64 read-only
The total number of octets transmitted out of the interface, including framing characters.
                                           portHistPreviousOutUcastPkts 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.12 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.
                                           portHistPreviousOutMulticastPkts 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.13 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses.
                                           portHistPreviousOutBroadcastPkts 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.14 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.
                                           portHistPreviousOutDiscards 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.15 counter64 read-only
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
                                           portHistPreviousOutErrors 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.16 counter64 read-only
For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors.
                                           portHistPreviousInUtilization 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.17 integer32 read-only
The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.
                                           portHistPreviousOutUtilization 1.3.6.1.4.1.259.8.1.11.1.2.8.3.1.18 integer32 read-only
The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.
                               portMediaInfoTable 1.3.6.1.4.1.259.8.1.11.1.2.10 no-access
This table lists the information of the media device (SFP/XFP/Copper) installed in the physical port. Only the ifIndices of Ethernet ports those are associated with the operational cards will be included in this table.
                                     portMediaInfoEntry 1.3.6.1.4.1.259.8.1.11.1.2.10.1 no-access
An entry in the Interface Media Information table. The ifIndices of ethernet interfaces will be used to index this table.
                                         portMediaInfoIfIndex 1.3.6.1.4.1.259.8.1.11.1.2.10.1.1 interfaceindex no-access
ifindex.
                                         portMediaInfoConnectorType 1.3.6.1.4.1.259.8.1.11.1.2.10.1.2 displaystring read-only
The connector type.
                                         portMediaInfoFiberType 1.3.6.1.4.1.259.8.1.11.1.2.10.1.3 displaystring read-only
The fiber type.
                                         portMediaInfoEthComplianceCodes 1.3.6.1.4.1.259.8.1.11.1.2.10.1.4 displaystring read-only
The ethernet compliance codes.
                                         portMediaInfoBaudRate 1.3.6.1.4.1.259.8.1.11.1.2.10.1.5 displaystring read-only
The baud rate.
                                         portMediaInfoVendorOUI 1.3.6.1.4.1.259.8.1.11.1.2.10.1.6 displaystring read-only
The OUI of the vendor.
                                         portMediaInfoVendorName 1.3.6.1.4.1.259.8.1.11.1.2.10.1.7 displaystring read-only
The media vendor name, full name of the corporation.
                                         portMediaInfoPartNumber 1.3.6.1.4.1.259.8.1.11.1.2.10.1.8 displaystring read-only
The media vendor part number.
                                         portMediaInfoRevision 1.3.6.1.4.1.259.8.1.11.1.2.10.1.9 displaystring read-only
The media vendor product version number.
                                         portMediaInfoSerialNumber 1.3.6.1.4.1.259.8.1.11.1.2.10.1.10 displaystring read-only
The vendor serial number of the media device.
                                         portMediaInfoDateCode 1.3.6.1.4.1.259.8.1.11.1.2.10.1.11 displaystring read-only
The date code of the media device.
                               portOpticalMonitoringInfoTable 1.3.6.1.4.1.259.8.1.11.1.2.11 no-access
This table lists the instrumented parameters of all optical interfaces.
                                     portOpticalMonitoringInfoEntry 1.3.6.1.4.1.259.8.1.11.1.2.11.1 no-access
Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table.
                                         portOpticalMonitoringInfoIfIndex 1.3.6.1.4.1.259.8.1.11.1.2.11.1.1 interfaceindex no-access
ifindex.
                                         portOpticalMonitoringInfoTemperature 1.3.6.1.4.1.259.8.1.11.1.2.11.1.2 displaystring read-only
This object holds the value of the transmitter laser diode temperature for the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius). If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or high/low warning.
                                         portOpticalMonitoringInfoVcc 1.3.6.1.4.1.259.8.1.11.1.2.11.1.3 displaystring read-only
This object holds the value of the Vcc. It is measured in V. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or high/low warning.
                                         portOpticalMonitoringInfoTxBiasCurrent 1.3.6.1.4.1.259.8.1.11.1.2.11.1.4 displaystring read-only
Tx Bias Current. It is measured in mA. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or high/low warning.
                                         portOpticalMonitoringInfoTxPower 1.3.6.1.4.1.259.8.1.11.1.2.11.1.5 displaystring read-only
This object holds the value of the transmitter optical signal power for the interface, measured in dBm. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or high/low warning.
                                         portOpticalMonitoringInfoRxPower 1.3.6.1.4.1.259.8.1.11.1.2.11.1.6 displaystring read-only
This object holds the value of the receiver optical signal power for the interface, measured in dBm. If the device support ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or high/low warning.
                               portTransceiverThresholdInfoTable 1.3.6.1.4.1.259.8.1.11.1.2.12 no-access
This table lists the threshold of transceivers.
                                     portTransceiverThresholdInfoEntry 1.3.6.1.4.1.259.8.1.11.1.2.12.1 no-access
Identify the index of the transceiver
                                         portTransceiverThresholdInfoIfIndex 1.3.6.1.4.1.259.8.1.11.1.2.12.1.1 interfaceindex no-access
ifindex.
                                         portTransceiverThresholdInfoTemperatureLowAlarm 1.3.6.1.4.1.259.8.1.11.1.2.12.1.2 integer32 read-write
This object holds the low alarm threshold of the transmitter laser diode temperature for the interface.
                                         portTransceiverThresholdInfoTemperatureLowWarn 1.3.6.1.4.1.259.8.1.11.1.2.12.1.3 integer32 read-write
This object holds the low warning threshold of the transmitter laser diode temperature for the interface.
                                         portTransceiverThresholdInfoTemperatureHighWarn 1.3.6.1.4.1.259.8.1.11.1.2.12.1.4 integer32 read-write
This object holds the high warning threshold of the transmitter laser diode temperature for the interface.
                                         portTransceiverThresholdInfoTemperatureHighAlarm 1.3.6.1.4.1.259.8.1.11.1.2.12.1.5 integer32 read-write
This object holds the high alarm threshold of the transmitter laser diode temperature for the interface.
                                         portTransceiverThresholdInfoVccLowAlarm 1.3.6.1.4.1.259.8.1.11.1.2.12.1.6 integer32 read-write
This object holds the low alarm threshold of the Vcc.
                                         portTransceiverThresholdInfoVccLowWarn 1.3.6.1.4.1.259.8.1.11.1.2.12.1.7 integer32 read-write
This object holds the low warning threshold of the Vcc.
                                         portTransceiverThresholdInfoVccHighWarn 1.3.6.1.4.1.259.8.1.11.1.2.12.1.8 integer32 read-write
This object holds the high warning threshold of the Vcc.
                                         portTransceiverThresholdInfoVccHighAlarm 1.3.6.1.4.1.259.8.1.11.1.2.12.1.9 integer32 read-write
This object holds the high alarm threshold of the Vcc.
                                         portTransceiverThresholdInfoTxBiasCurrentLowAlarm 1.3.6.1.4.1.259.8.1.11.1.2.12.1.10 integer32 read-write
low alarm threshold of Tx Bias Current.
                                         portTransceiverThresholdInfoTxBiasCurrentLowWarn 1.3.6.1.4.1.259.8.1.11.1.2.12.1.11 integer32 read-write
low warning threshold of Tx Bias Current.
                                         portTransceiverThresholdInfoTxBiasCurrentHighWarn 1.3.6.1.4.1.259.8.1.11.1.2.12.1.12 integer32 read-write
high warning threshold of Tx Bias Current.
                                         portTransceiverThresholdInfoTxBiasCurrentHighAlarm 1.3.6.1.4.1.259.8.1.11.1.2.12.1.13 integer32 read-write
high alarm threshold of Tx Bias Current.
                                         portTransceiverThresholdInfoTxPowerLowAlarm 1.3.6.1.4.1.259.8.1.11.1.2.12.1.14 integer32 read-write
This object holds the low alarm threshold of the transmitter optical signal power for theinterface.
                                         portTransceiverThresholdInfoTxPowerLowWarn 1.3.6.1.4.1.259.8.1.11.1.2.12.1.15 integer32 read-write
This object holds the low warning threshold of the transmitter optical signal power for the interface.
                                         portTransceiverThresholdInfoTxPowerHighWarn 1.3.6.1.4.1.259.8.1.11.1.2.12.1.16 integer32 read-write
This object holds the high warning threshold of the transmitter optical signal power for the interface.
                                         portTransceiverThresholdInfoTxPowerHighAlarm 1.3.6.1.4.1.259.8.1.11.1.2.12.1.17 integer32 read-write
This object holds the high alarm threshold of the transmitter optical signal power for the interface.
                                         portTransceiverThresholdInfoRxPowerLowAlarm 1.3.6.1.4.1.259.8.1.11.1.2.12.1.18 integer32 read-write
This object holds the low alarm threshold of the receiver optical signal power for the interface.
                                         portTransceiverThresholdInfoRxPowerLowWarn 1.3.6.1.4.1.259.8.1.11.1.2.12.1.19 integer32 read-write
This object holds the low warning threshold of the receiver optical signal power for the interface.
                                         portTransceiverThresholdInfoRxPowerHighWarn 1.3.6.1.4.1.259.8.1.11.1.2.12.1.20 integer32 read-write
This object holds the high warning threshold of the receiver optical signal power for the interface.
                                         portTransceiverThresholdInfoRxPowerHighAlarm 1.3.6.1.4.1.259.8.1.11.1.2.12.1.21 integer32 read-write
This object holds the high alarm threshold of the receiver optical signal power for the interface.
                                         portTransceiverThresholdAutoMode 1.3.6.1.4.1.259.8.1.11.1.2.12.1.22 truthvalue read-write
Indicate the transceiver threshold is retrieved from EEPROM or configured by user.
                               portPDTable 1.3.6.1.4.1.259.8.1.11.1.2.13 no-access
This table lists the info of all PD (powered device) interfaces.
                                     portPDEntry 1.3.6.1.4.1.259.8.1.11.1.2.13.1 no-access
Configures PD (powered device) feature.
                                         portPDIfIndex 1.3.6.1.4.1.259.8.1.11.1.2.13.1.1 interfaceindex no-access
The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                         portPDStatus 1.3.6.1.4.1.259.8.1.11.1.2.13.1.2 integer read-only
Indicates the status of the powered device port. None for non PD device, up for powered device port consuming power from PSE (power sourcing equipment) port. Enumeration: 'down': 2, 'none': 0, 'up': 1.
                           trunkMgt 1.3.6.1.4.1.259.8.1.11.1.3
                               trunkMaxId 1.3.6.1.4.1.259.8.1.11.1.3.1 integer32 read-only
The maximum number for a trunk identifier.
                               trunkValidNumber 1.3.6.1.4.1.259.8.1.11.1.3.2 integer32 read-only
The number of valid trunks.
                               trunkTable 1.3.6.1.4.1.259.8.1.11.1.3.3 no-access
Table describing the configuration and status of each trunk.
                                   trunkEntry 1.3.6.1.4.1.259.8.1.11.1.3.3.1 no-access
An entry describing the configuration and status of a particular trunk.
                                       trunkIndex 1.3.6.1.4.1.259.8.1.11.1.3.3.1.1 integer32 no-access
Identifies the trunk within the switch that is described by the table entry.
                                       trunkPorts 1.3.6.1.4.1.259.8.1.11.1.3.3.1.2 portlist read-only
The complete set of ports currently associated with this trunk.
                                       trunkCreation 1.3.6.1.4.1.259.8.1.11.1.3.3.1.3 integer read-only
A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk. Enumeration: 'lacp': 2, 'static': 1.
                                       trunkStatus 1.3.6.1.4.1.259.8.1.11.1.3.3.1.4 validstatus read-only
Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. A trunk created by LACP cannot be manually destroyed or (re)configured.
                               trunkBalanceMode 1.3.6.1.4.1.259.8.1.11.1.3.4 integer read-write
This defines the load balancing mode of trunks in the system. It may be based on source and/or destination MAC address or IP address. macSrc(1) means source MAC address. macDst(2) means destination MAC address. macSrcDst(3) means source and destination MAC address. ipSrc(4) means source IP address. ipDst(5) means destination IP address. ipSrcDst(6) means source and destination IP address. Enumeration: 'ipSrcDst': 6, 'ipDst': 5, 'ipSrc': 4, 'macDst': 2, 'macSrc': 1, 'macSrcDst': 3.
                           lacpMgt 1.3.6.1.4.1.259.8.1.11.1.4
                               lacpPortTable 1.3.6.1.4.1.259.8.1.11.1.4.1 no-access
Table for LACP port configuration.
                                   lacpPortEntry 1.3.6.1.4.1.259.8.1.11.1.4.1.1 no-access
Entry for LACP port configuration. While an entry may exist for a particular port, the port may not support LACP and an attempt to enable LACP may result in failure.
                                       lacpPortIndex 1.3.6.1.4.1.259.8.1.11.1.4.1.1.1 interfaceindex no-access
The port interface of the lacpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                       lacpPortStatus 1.3.6.1.4.1.259.8.1.11.1.4.1.1.2 enabledstatus read-write
Whether 802.3ad LACP is enabled.
                           staMgt 1.3.6.1.4.1.259.8.1.11.1.5
                               staSystemStatus 1.3.6.1.4.1.259.8.1.11.1.5.1 enabledstatus read-write
Global spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled.
                               staPortTable 1.3.6.1.4.1.259.8.1.11.1.5.2 no-access
The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType.
                                   staPortEntry 1.3.6.1.4.1.259.8.1.11.1.5.2.1 no-access
The conceptual entry of staPortTable.
                                       staPortProtocolMigration 1.3.6.1.4.1.259.8.1.11.1.5.2.1.3 truthvalue read-write
When operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns false(2) when read.
                                       staPortOperEdgePort 1.3.6.1.4.1.259.8.1.11.1.5.2.1.5 truthvalue read-only
The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received.
                                       staPortAdminPointToPoint 1.3.6.1.4.1.259.8.1.11.1.5.2.1.6 integer read-write
The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means. Enumeration: 'forceTrue': 0, 'forceFalse': 1, 'auto': 2.
                                       staPortOperPointToPoint 1.3.6.1.4.1.259.8.1.11.1.5.2.1.7 truthvalue read-only
The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the staPortAdminPointToPoint object.
                                       staPortSystemStatus 1.3.6.1.4.1.259.8.1.11.1.5.2.1.9 enabledstatus read-write
Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled.
                                       staPortLongAdminPathCost 1.3.6.1.4.1.259.8.1.11.1.5.2.1.10 integer32 read-write
The admin value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in the 32-bit value range when the staPathCostMethod is long(2). If the staPathCostMethod is short(1), this mib object is not instantiated. Setting this to 0 means that the path cost is automatically determined. In this case, read staPortLongOperPathCost to get the oper value.
                                       staPortLongOperPathCost 1.3.6.1.4.1.259.8.1.11.1.5.2.1.11 integer32 read-only
The oper value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in the 32-bit value range when the staPathCostMethod is long(2). If the staPathCostMethod is short(1), this mib object is not instantiated.
                                       staPortBpduFlooding 1.3.6.1.4.1.259.8.1.11.1.5.2.1.12 enabledstatus read-write
This parameter is used to configure the capability of BPDUs flooding.
                                       staPortBpduGuard 1.3.6.1.4.1.259.8.1.11.1.5.2.1.15 enabledstatus read-write
A value of enabled(1) indicates that BPDU port guard feature is enabled for each port. A value of disabled(2) indicates that the feature is disabled.
                                       staPortAdminEdgePortWithAuto 1.3.6.1.4.1.259.8.1.11.1.5.2.1.16 integer read-write
The administrative value of the edge port parameter. A value of enable(1) indicates that this port should be assumed as an edge-port, a value of disable(2) indicates that this port should be assumed as a non-edge-port and a value of auot (3) indicates this port in RSPT or MSTP mode should be assumed as an edge-port after migration or max age expire without receiving any BPDU and sending BPDU with proposal flag on. Enumeration: 'true': 1, 'false': 2, 'auto': 3.
                                       staPortBpduFilter 1.3.6.1.4.1.259.8.1.11.1.5.2.1.17 enabledstatus read-write
The administrative value of the BPDU filter parameter. A value of enabled(1) indicates that this port will avoid transmitting BPDUs on edge-port and the value of disabled(2) indicates that this port will not avoid transmitting BPDUs on edge-port.
                                       staPortRootGuardStatus 1.3.6.1.4.1.259.8.1.11.1.5.2.1.18 enabledstatus read-write
Specifies the desired status of the root guard. This variable configures the root guard feature to enforce the root bridge placement in the network.
                                       staPortBpduGuardAutoRecovery 1.3.6.1.4.1.259.8.1.11.1.5.2.1.19 enabledstatus read-write
A value of enabled(1) indicates that BPDU port guard auto recovery mechanism is enabled for this port. A value of disabled(2) indicates that the mechanism is disabled.
                                       staPortBpduGuardAutoRecoveryInterval 1.3.6.1.4.1.259.8.1.11.1.5.2.1.20 unsigned32 read-write
The interval in seconds used by BPDU guard auto recovery mechanism.
                                       staPortTcPropStop 1.3.6.1.4.1.259.8.1.11.1.5.2.1.21 truthvalue read-write
Stop topology change progate on this ifindex. Don't enable on potentially ring port.
                               staProtocolType 1.3.6.1.4.1.259.8.1.11.1.5.3 integer read-write
The version of Spanning Tree Protocol the bridge is currently running. The value 'stp(1)' indicates the Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may be defined in the future as new or updated versions of the protocol become available. Enumeration: 'stp': 1, 'mstp': 3, 'rstp': 2.
                               staTxHoldCount 1.3.6.1.4.1.259.8.1.11.1.5.4 integer32 read-write
The value used by the Port Transmit state machine to limit the maximum transmission rate.
                               staPathCostMethod 1.3.6.1.4.1.259.8.1.11.1.5.5 stapathcostmode read-write
Indicates the type of spanning tree path cost mode configured on the switch. This mode applies to all instances of the spanning tree protocol running on the switch. When the value of this MIB object is changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is set to long(2), the staPortLongPathCost MIB object must be used to retrieve/configure the spanning tree port path cost as a 32-bit value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of staPortLongPathCost for the same instance exceeds 65535. When the value of this MIB object is set to short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used.
                               xstMgt 1.3.6.1.4.1.259.8.1.11.1.5.6
                                   mstName 1.3.6.1.4.1.259.8.1.11.1.5.6.1 displaystring read-write
The name of the Multiple Spanning Tree region.
                                   mstRevision 1.3.6.1.4.1.259.8.1.11.1.5.6.2 integer32 read-write
The Revision number of the Multiple Spanning Tree region.
                                   mstMaxHops 1.3.6.1.4.1.259.8.1.11.1.5.6.3 integer32 read-write
The max hop number counts of the Multiple Spanning Tree region.
                                   xstInstanceCfgTable 1.3.6.1.4.1.259.8.1.11.1.5.6.4 no-access
This table is used to configure the property of a specific instance in Multiple Spanning Tree or Rapid Spanning Tree. If Rapid Spanning Tree protocol is in use, the mstInstanceEditIndex is always 0.
                                       xstInstanceCfgEntry 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1 no-access
A conceptual row containing the property of the RST or MST instance.
                                           xstInstanceCfgIndex 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.1 integer32 no-access
An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.
                                           xstInstanceCfgPriority 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.2 integer32 read-write
The priority of a specific spanning tree instance. The value assigned should be in the range 0-61440 in steps of 4096.
                                           xstInstanceCfgTimeSinceTopologyChange 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.3 timeticks read-only
The time (in hundredths of a second) since the last topology change detected by the bridge entity in RST or MST.
                                           xstInstanceCfgTopChanges 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.4 integer32 read-only
The total number of topology changes detected by this bridge in RST or MST since the management entity was last reset or initialized.
                                           xstInstanceCfgDesignatedRoot 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.5 bridgeid read-only
The bridge identifier of the root of the spanning tree as determined by the Multiple Spanning Tree Protocol. (802.1s) or Rapid Spanning Tree Protocol (802.1w) executed by this node. This value is used as the root identifier parameter in all configuration bridge PDUs originated by this node.
                                           xstInstanceCfgRootCost 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.6 integer32 read-only
The cost of the path to the root as seen from this bridge of the RST or MST.
                                           xstInstanceCfgRootPort 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.7 integer32 read-only
The number of the port which offers the lowest cost path from this bridge to the root bridge of the RST or MST.
                                           xstInstanceCfgMaxAge 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.8 timeout read-only
The maximum age of Multiple Spanning Tree Protocol (802.1s) or Rapid Spanning Tree Protocol (802.1w) information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
                                           xstInstanceCfgHelloTime 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.9 timeout read-only
The amount of time between the transmission of configuration bridge PDUs by this node on any port when it is the root of the specific spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using in RST or MST.
                                           xstInstanceCfgHoldTime 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.10 timeout read-only
This time value determines the interval length during which no more than two configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
                                           xstInstanceCfgForwardDelay 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.11 timeout read-only
For RST or MST protocol, this time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the forwarding state. The value determines how long the port stays in each of the listening and learning states, which precede the forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the forwarding database. This value is the current value being used by the bridge. xstInstanceCfgBridgeForwardDelay defines the value that this bridge and all others would start using if/when this bridge were to become the root.
                                           xstInstanceCfgBridgeMaxAge 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.12 timeout read-only
For RST or MST protocol, the time (in hundredths of second) that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of xstInstanceCfgBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second.
                                           xstInstanceCfgBridgeHelloTime 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.13 timeout read-only
For RST or MST protocol,the time (in hundredths of a second) that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1990 to be 1 second.
                                           xstInstanceCfgBridgeForwardDelay 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.14 timeout read-only
For RST or MST protocol, the time (in hundredths of a second) that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of xstInstanceCfgBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second.
                                           xstInstanceCfgTxHoldCount 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.15 integer32 read-only
For RST or MST protocol, the value used by the port transmit state machine to limit the maximum transmission rate.
                                           xstInstanceCfgPathCostMethod 1.3.6.1.4.1.259.8.1.11.1.5.6.4.1.16 stapathcostmode read-only
For RST or MST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree protocol running on the switch. When the value of this MIB object is changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is set to long(2), the xstInstancePortPathCost MIB object must be used in order to retrieve/configure the spanning tree port path cost as a 32-bit value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of xstInstancePortPathCost for the same instance exceeds 65535. When the value of this MIB object is set to short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used.
                                   xstInstancePortTable 1.3.6.1.4.1.259.8.1.11.1.5.6.5 no-access
The extension table for dot1dStpPortEntry to provide additional Spanning Tree information and configuration.
                                       xstInstancePortEntry 1.3.6.1.4.1.259.8.1.11.1.5.6.5.1 no-access
The conceptual row for xstInstancePortTable.
                                           xstInstancePortPriority 1.3.6.1.4.1.259.8.1.11.1.5.6.5.1.3 integer32 read-write
Defines the priority used for this port in the Spanning Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest priority (i.e., lowest value) will be configured as an active link in the Spanning Tree. This makes a port with higher priority less likely to be blocked if the Spanning Tree Algorithm is detecting network loops. Where more than one port is assigned the highest priority, the port with lowest numeric identifier will be enabled.
                                           xstInstancePortState 1.3.6.1.4.1.259.8.1.11.1.5.6.5.1.4 integer read-only
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame: discarding(1): Port receives configuration messages, but does not forward packets. learning(2): Port has transmitted configuration messages for an interval set by the Forward Delay parameter without receiving contradictory information. Port address table is cleared, and the port begins learning addresses. forwarding(3): Port forwards packets, and continues learning addresses. For ports which are disabled (see xstInstancePortEnable), this object will have a value of discarding(1). Enumeration: 'discarding': 1, 'forwarding': 3, 'learning': 2.
                                           xstInstancePortEnable 1.3.6.1.4.1.259.8.1.11.1.5.6.5.1.5 enabledstatus read-only
The enabled/disabled status of the port.
                                           xstInstancePortDesignatedRoot 1.3.6.1.4.1.259.8.1.11.1.5.6.5.1.7 bridgeid read-only
The unique bridge identifier of the bridge recorded as the root in the configuration BPDUs transmitted by the designated bridge for the segment to which the port is attached.
                                           xstInstancePortDesignatedCost 1.3.6.1.4.1.259.8.1.11.1.5.6.5.1.8 integer32 read-only
The path cost of the designated port of the segment connected to this port. This value is compared to the root path cost field in received bridge PDUs.
                                           xstInstancePortDesignatedBridge 1.3.6.1.4.1.259.8.1.11.1.5.6.5.1.9 bridgeid read-only
The bridge identifier of the bridge which this port considers to be the designated bridge for this port's segment.
                                           xstInstancePortDesignatedPort 1.3.6.1.4.1.259.8.1.11.1.5.6.5.1.10 octet string read-only
The port identifier of the port on the designated bridge for this port's segment.
                                           xstInstancePortForwardTransitions 1.3.6.1.4.1.259.8.1.11.1.5.6.5.1.11 counter32 read-only
The number of times this port has transitioned from the learning state to the forwarding state.
                                           xstInstancePortPortRole 1.3.6.1.4.1.259.8.1.11.1.5.6.5.1.12 integer read-only
The role of the port in the RST or MST protocol: (1) The port has no role within the spanning tree (2) The port is part of the active topology connecting the bridge to the root bridge (i.e., root port) (3) The port is connecting a LAN through the bridge to the root bridge (i.e., designated port) (4) The port may provide connectivity if other bridges, bridge ports, or LANs fail or are removed. (5) The port provides backup if other bridges, bridge ports, or LANs fail or are removed. (6) For MST protocol only, indicates whether this instance is in a master role. Enumeration: 'root': 2, 'alternate': 4, 'designated': 3, 'disabled': 1, 'master': 6, 'backup': 5.
                                           xstInstancePortAdminPathCost 1.3.6.1.4.1.259.8.1.11.1.5.6.5.1.13 integer32 read-write
The admin value of the MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values assigned to ports with slower media. (Path cost takes precedence over port priority).
                                           xstInstancePortOperPathCost 1.3.6.1.4.1.259.8.1.11.1.5.6.5.1.14 integer32 read-only
The oper value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values assigned to ports with slower media. (Path cost takes precedence over port priority).
                                   mstInstanceEditTable 1.3.6.1.4.1.259.8.1.11.1.5.6.6 no-access
The Multiple Spanning Tree region instance vlan configuration table. Please read the actual instance vlan mapped in the mstInstanceOperTable.
                                       mstInstanceEditEntry 1.3.6.1.4.1.259.8.1.11.1.5.6.6.1 no-access
A conceptual row containing the status of the MSTP instance.
                                           mstInstanceEditIndex 1.3.6.1.4.1.259.8.1.11.1.5.6.6.1.1 integer32 no-access
An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.
                                           mstInstanceEditVlansMap 1.3.6.1.4.1.259.8.1.11.1.5.6.6.1.2 octet string read-only
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. To create a row, write any of mstInstanceEditVlansMap, mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or mstInstanceEditVlansMap4k, to a non-empty list. To destroy a row, write all of these four variables to an empty list.
                                           mstInstanceEditVlansMap2k 1.3.6.1.4.1.259.8.1.11.1.5.6.6.1.3 octet string read-only
A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. To create a row, write any of mstInstanceEditVlansMap, mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or mstInstanceEditVlansMap4k, to a non-empty list. To destroy a row, write all of these four variables to an empty list.
                                           mstInstanceEditVlansMap3k 1.3.6.1.4.1.259.8.1.11.1.5.6.6.1.4 octet string read-only
A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. To create a row, write any of mstInstanceEditVlansMap, mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or mstInstanceEditVlansMap4k, to a non-empty list. To destroy a row, write all of these four variables to an empty list.
                                           mstInstanceEditVlansMap4k 1.3.6.1.4.1.259.8.1.11.1.5.6.6.1.5 octet string read-only
A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. To create a row, write any of mstInstanceEditVlansMap, mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or mstInstanceEditVlansMap4k, to a non-empty list. To destroy a row, write all of these four variables to an empty list.
                                           mstInstanceEditRemainingHops 1.3.6.1.4.1.259.8.1.11.1.5.6.6.1.6 integer32 read-only
The remaining hop count for this MST instance.
                                   mstInstanceOperTable 1.3.6.1.4.1.259.8.1.11.1.5.6.7 no-access
The Multiple Spanning Tree region instance vlan mapped table.
                                       mstInstanceOperEntry 1.3.6.1.4.1.259.8.1.11.1.5.6.7.1 no-access
A conceptual row containing the status of the MSTP instance.
                                           mstInstanceOperIndex 1.3.6.1.4.1.259.8.1.11.1.5.6.7.1.1 integer32 no-access
An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.
                                           mstInstanceOperVlansMap 1.3.6.1.4.1.259.8.1.11.1.5.6.7.1.2 octet string read-only
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'.
                                           mstInstanceOperVlansMap2k 1.3.6.1.4.1.259.8.1.11.1.5.6.7.1.3 octet string read-only
A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'.
                                           mstInstanceOperVlansMap3k 1.3.6.1.4.1.259.8.1.11.1.5.6.7.1.4 octet string read-only
A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'.
                                           mstInstanceOperVlansMap4k 1.3.6.1.4.1.259.8.1.11.1.5.6.7.1.5 octet string read-only
A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'.
                               staLoopbackDetectionPortTable 1.3.6.1.4.1.259.8.1.11.1.5.8 no-access
A table provides the mechanism to configure the spanning tree loopback detection of each port or trunk
                                   staLoopbackDetectionPortEntry 1.3.6.1.4.1.259.8.1.11.1.5.8.1 no-access
A conceptual row of staLoopbackDetectionPortTable.
                                       staLoopbackDetectionPortIfIndex 1.3.6.1.4.1.259.8.1.11.1.5.8.1.1 interfaceindex no-access
The port and the trunk interfaces of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                       staLoopbackDetectionPortStatus 1.3.6.1.4.1.259.8.1.11.1.5.8.1.2 enabledstatus read-write
Status of the port on whether spanning tree loopback detection is enabled.
                                       staLoopbackDetectionPortTrapStatus 1.3.6.1.4.1.259.8.1.11.1.5.8.1.3 enabledstatus read-write
The parameter indicates whether the trap has to be sent when the loopback BPDUs have been detected.
                                       staLoopbackDetectionPortReleaseMode 1.3.6.1.4.1.259.8.1.11.1.5.8.1.4 integer read-write
Setting it to auto(1) indicates that this port can be released from discarding state automatically after loopback has occurred. Setting it to manual(2) indicates that this port can be released from discarding state manually after loopback has occurred. Enumeration: 'auto': 1, 'manual': 2.
                                       staLoopbackDetectionPortRelease 1.3.6.1.4.1.259.8.1.11.1.5.8.1.5 integer read-write
Set this to release(2) to release the port from discarding state. noRelease(1) will always be obtained when reading this variable. Enumeration: 'release': 2, 'noRelease': 1.
                               staSystemBPDUFlooding 1.3.6.1.4.1.259.8.1.11.1.5.9 integer read-write
Global BPDU flooding behavior configuration. When BPDU is received on spanning tree disabled port. (1) BPDU is flooded to all other spanning tree disabled ports in vlan that received BPDU. (2) BPDU is flooded to all other spanning tree disabled ports. Enumeration: 'to-all': 2, 'to-vlan': 1.
                           restartMgt 1.3.6.1.4.1.259.8.1.11.1.7
                               restartOpCodeFile 1.3.6.1.4.1.259.8.1.11.1.7.1 displaystring read-write
Name of op-code file for start-up.
                               restartConfigFile 1.3.6.1.4.1.259.8.1.11.1.7.2 displaystring read-write
Name of configuration file for start-up.
                               restartControl 1.3.6.1.4.1.259.8.1.11.1.7.3 integer read-write
Setting this object to warmBoot(2) causes the device to reinitialize itself such that neither the agent configuration nor the protocol entity implementation is altered. Setting this object to coldBoot(3) causes the device to reinitialize itself such that the agent's configuration or the protocol entity implementation may be altered. When the device is running normally, this variable has a value of running(1). Enumeration: 'running': 1, 'coldBoot': 3, 'warmBoot': 2.
                           mirrorMgt 1.3.6.1.4.1.259.8.1.11.1.8
                               mirrorTable 1.3.6.1.4.1.259.8.1.11.1.8.1 no-access
Table for port mirroring, enabling a port to be mirrored to/from another port. Not all ports can be mirrored and limitations may apply as to which ports can be used as either source or destination ports.
                                   mirrorEntry 1.3.6.1.4.1.259.8.1.11.1.8.1.1 no-access
The conceptual row of mirrorTable.
                                       mirrorDestinationPort 1.3.6.1.4.1.259.8.1.11.1.8.1.1.1 interfaceindex no-access
The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                       mirrorSourcePort 1.3.6.1.4.1.259.8.1.11.1.8.1.1.2 interfaceindex no-access
The source port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                       mirrorType 1.3.6.1.4.1.259.8.1.11.1.8.1.1.3 integer read-only
If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and transmit packets will be mirrored. Enumeration: 'both': 3, 'rx': 1, 'tx': 2.
                                       mirrorStatus 1.3.6.1.4.1.259.8.1.11.1.8.1.1.4 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                               vlanMirrorTable 1.3.6.1.4.1.259.8.1.11.1.8.2 no-access
Table for VLAN mirroring, enabling a VLAN to be mirrored to a port.
                                   vlanMirrorEntry 1.3.6.1.4.1.259.8.1.11.1.8.2.1 no-access
The conceptual row of vlanMirrorTable.
                                       vlanMirrorDestinationPort 1.3.6.1.4.1.259.8.1.11.1.8.2.1.1 interfaceindex no-access
The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                       vlanMirrorSourceVlan 1.3.6.1.4.1.259.8.1.11.1.8.2.1.2 vlanindex no-access
The source VLAN for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
                                       vlanMirrorStatus 1.3.6.1.4.1.259.8.1.11.1.8.2.1.4 validstatus read-only
Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry.
                               rspanTable 1.3.6.1.4.1.259.8.1.11.1.8.3 no-access
A table that contains the settings of RSPAN.
                                   rspanEntry 1.3.6.1.4.1.259.8.1.11.1.8.3.1 no-access
The conceptual row of rspanTable.
                                       rspanSessionId 1.3.6.1.4.1.259.8.1.11.1.8.3.1.1 integer32 no-access
The session ID that may specify an entry in the table which contains destination port(s) information.
                                       rspanSrcTxPorts 1.3.6.1.4.1.259.8.1.11.1.8.3.1.2 portlist read-only
Specifies the source port list in tx mode.
                                       rspanSrcRxPorts 1.3.6.1.4.1.259.8.1.11.1.8.3.1.3 portlist read-only
Specifies the source port list in rx mode.
                                       rspanDstPort 1.3.6.1.4.1.259.8.1.11.1.8.3.1.4 integer32 read-only
The port number of a destination port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                       rspanDstPortTag 1.3.6.1.4.1.259.8.1.11.1.8.3.1.5 integer read-only
Specifies the traffic which is sent out from source port with RSPAN VLAN ID or not. Enumeration: 'untagged': 2, 'none': 1, 'tagged': 3.
                                       rspanSwitchRole 1.3.6.1.4.1.259.8.1.11.1.8.3.1.6 integer read-only
Specifies the role of current switch. Enumeration: 'source': 2, 'none': 1, 'intermediate': 3, 'destination': 4.
                                       rspanRemotePorts 1.3.6.1.4.1.259.8.1.11.1.8.3.1.7 portlist read-only
Specifies the uplink port list.
                                       rspanRemoteVlanId 1.3.6.1.4.1.259.8.1.11.1.8.3.1.8 integer32 read-only
Specifies the ID of a RSPAN VLAN.
                                       rspanOperStatus 1.3.6.1.4.1.259.8.1.11.1.8.3.1.9 integer read-only
The operational status of the entry. A status of up(1) means the setting of a session is complete and it has started performing its function. A status of down(2) means no function is performed because of incompleted session setting. Enumeration: 'down': 2, 'up': 1.
                                       rspanStatus 1.3.6.1.4.1.259.8.1.11.1.8.3.1.10 validstatus read-only
Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry.
                               macMirrorTable 1.3.6.1.4.1.259.8.1.11.1.8.4 no-access
Table for MAC mirroring, enabling a MAC address to be mirrored to a port.
                                   macMirrorEntry 1.3.6.1.4.1.259.8.1.11.1.8.4.1 no-access
The conceptual row of mirrorMacTable.
                                       macMirrorDestinationPort 1.3.6.1.4.1.259.8.1.11.1.8.4.1.1 interfaceindex no-access
The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                       macMirrorSourceMacAddr 1.3.6.1.4.1.259.8.1.11.1.8.4.1.2 macaddress no-access
Packets with matching source MAC address will be monitored.
                                       macMirrorStatus 1.3.6.1.4.1.259.8.1.11.1.8.4.1.3 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                           igmpSnoopMgt 1.3.6.1.4.1.259.8.1.11.1.9
                               igmpSnoopStatus 1.3.6.1.4.1.259.8.1.11.1.9.1 enabledstatus read-write
Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports.
                               igmpSnoopQuerier 1.3.6.1.4.1.259.8.1.11.1.9.2 enabledstatus read-write
Enables (disables) whether the switch acts as an IGMP querier.
                               igmpSnoopRouterPortExpireTime 1.3.6.1.4.1.259.8.1.11.1.9.6 integer32 read-write
Sets the time (in seconds) the switch waits after the previous querier has stopped querying before the router port (which received query packets from previous querier) expires.
                               igmpSnoopVersion 1.3.6.1.4.1.259.8.1.11.1.9.7 integer32 read-write
IGMP version snooped
                               igmpSnoopRouterCurrentTable 1.3.6.1.4.1.259.8.1.11.1.9.8 no-access
Table for current router ports.
                                   igmpSnoopRouterCurrentEntry 1.3.6.1.4.1.259.8.1.11.1.9.8.1 no-access
Entry for current router ports.
                                       igmpSnoopRouterCurrentVlanIndex 1.3.6.1.4.1.259.8.1.11.1.9.8.1.1 unsigned32 no-access
The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRouterStaticTable.
                                       igmpSnoopRouterCurrentPorts 1.3.6.1.4.1.259.8.1.11.1.9.8.1.2 portlist read-only
The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable.
                                       igmpSnoopRouterCurrentStatus 1.3.6.1.4.1.259.8.1.11.1.9.8.1.3 portlist read-only
The set of ports which are static router ports.
                               igmpSnoopRouterStaticTable 1.3.6.1.4.1.259.8.1.11.1.9.9 no-access
Table for static router ports.
                                   igmpSnoopRouterStaticEntry 1.3.6.1.4.1.259.8.1.11.1.9.9.1 no-access
Entry for static router ports.
                                       igmpSnoopRouterStaticVlanIndex 1.3.6.1.4.1.259.8.1.11.1.9.9.1.1 unsigned32 no-access
The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRouterStaticTable.
                                       igmpSnoopRouterStaticPorts 1.3.6.1.4.1.259.8.1.11.1.9.9.1.2 portlist read-only
The set of ports which are static router ports.
                                       igmpSnoopRouterStaticStatus 1.3.6.1.4.1.259.8.1.11.1.9.9.1.3 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                               igmpSnoopMulticastStaticTable 1.3.6.1.4.1.259.8.1.11.1.9.11 no-access
Table for static multicast addresses.
                                     igmpSnoopMulticastStaticEntry 1.3.6.1.4.1.259.8.1.11.1.9.11.1 no-access
Entry for static multicast addresses.
                                         igmpSnoopMulticastStaticVlanIndex 1.3.6.1.4.1.259.8.1.11.1.9.11.1.1 unsigned32 no-access
The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMulticastStaticTable.
                                         igmpSnoopMulticastStaticIpAddress 1.3.6.1.4.1.259.8.1.11.1.9.11.1.2 ipaddress no-access
IP address of multicast group.
                                         igmpSnoopMulticastStaticPorts 1.3.6.1.4.1.259.8.1.11.1.9.11.1.3 portlist read-only
The set of ports which are members.
                                         igmpSnoopMulticastStaticStatus 1.3.6.1.4.1.259.8.1.11.1.9.11.1.4 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                               igmpSnoopCurrentVlanTable 1.3.6.1.4.1.259.8.1.11.1.9.14 no-access
Table for enabling or disabling IGMP snooping per VLAN.
                                     igmpSnoopCurrentVlanEntry 1.3.6.1.4.1.259.8.1.11.1.9.14.1 no-access
Entry for enabling or disabling IGMP snooping.
                                         igmpSnoopCurrentVlanIndex 1.3.6.1.4.1.259.8.1.11.1.9.14.1.1 vlanindex no-access
Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface.
                                         igmpSnoopCurrentVlanStatus 1.3.6.1.4.1.259.8.1.11.1.9.14.1.2 enabledstatus read-write
Parameter to enable or disable IGMP snooping on this VLAN. When enabled, the device will examine IGMP packets and set up filters for IGMP ports.
                                         igmpSnoopCurrentVlanImmediateLeave 1.3.6.1.4.1.259.8.1.11.1.9.14.1.3 enabledstatus read-write
The parameter to enable or disable the Immediate-Leave feature on this VLAN.
                                         igmpSnoopCurrentVlanGeneralQuerySuppression 1.3.6.1.4.1.259.8.1.11.1.9.14.1.4 enabledstatus read-write
The parameter to enable or disable the general query suppresion on this VLAN.
                                         igmpSnoopCurrentVlanLastMemQueryCount 1.3.6.1.4.1.259.8.1.11.1.9.14.1.5 unsigned32 read-write
Represents the number of queries sent by the switch before it assumes there are no local members.
                                         igmpSnoopCurrentVlanLastMemQueryIntvl 1.3.6.1.4.1.259.8.1.11.1.9.14.1.6 unsigned32 read-write
The last member query interval is the max response time inserted into group-specific queries sent in response to leave group messages,and is also the the max response time inserted into group-and-source-specific query messages.
                                         igmpSnoopCurrentVlanProxyAddress 1.3.6.1.4.1.259.8.1.11.1.9.14.1.7 ipaddress read-write
Represents the address of queries sent by the switch.
                                         igmpSnoopCurrentVlanQueryIntvl 1.3.6.1.4.1.259.8.1.11.1.9.14.1.8 unsigned32 read-write
Represents the query interval of queries sent by the switch.
                                         igmpSnoopCurrentVlanQueryRespIntvl 1.3.6.1.4.1.259.8.1.11.1.9.14.1.9 unsigned32 read-write
Represents the query response interval of queries sent by the switch.
                                         igmpSnoopCurrentVlanProxyReporting 1.3.6.1.4.1.259.8.1.11.1.9.14.1.10 integer read-write
Set this variable to enabled(1) to enable the feature. Set this variable to disabled(2) to disable the feature. Set this variable to default(3), the status of the feature is decided by the global configuration. Enumeration: 'disabled': 2, 'default': 3, 'enabled': 1.
                                         igmpSnoopCurrentVlanVersion 1.3.6.1.4.1.259.8.1.11.1.9.14.1.11 unsigned32 read-write
the version of igmp packets is supported by this vlan.
                                         igmpSnoopCurrentVlanVersionExclusive 1.3.6.1.4.1.259.8.1.11.1.9.14.1.12 enabledstatus read-write
Enable/disable control of the IGMP Snooping exclusive supported version.
                                         igmpSnoopCurrentVlanImmediateLeaveByHostIp 1.3.6.1.4.1.259.8.1.11.1.9.14.1.14 enabledstatus read-write
The parameter to enable or disable the Immediate-Leave feature by host ip on this VLAN.
                               igmpSnoopMulticastGroupTable 1.3.6.1.4.1.259.8.1.11.1.9.15 no-access
Table for current multicast addresses.
                                     igmpSnoopMulticastGroupEntry 1.3.6.1.4.1.259.8.1.11.1.9.15.1 no-access
Entry for Group multicast addresses.
                                         igmpSnoopMulticastGroupVlanIndex 1.3.6.1.4.1.259.8.1.11.1.9.15.1.1 vlanindex no-access
The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMulticastStaticTable.
                                         igmpSnoopMulticastGroupIpAddress 1.3.6.1.4.1.259.8.1.11.1.9.15.1.2 ipaddress no-access
IP address of multicast group.
                                         igmpSnoopMulticastGroupSourceIPAddress 1.3.6.1.4.1.259.8.1.11.1.9.15.1.3 ipaddress no-access
Source IP address of source.
                                         igmpSnoopMulticastGroupPorts 1.3.6.1.4.1.259.8.1.11.1.9.15.1.4 portlist read-only
The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable.
                                         igmpSnoopMulticastGroupStatus 1.3.6.1.4.1.259.8.1.11.1.9.15.1.5 portlist read-only
The set of ports which are static IGMP member ports.
                                         igmpSnoopMulticastGroupPortCount 1.3.6.1.4.1.259.8.1.11.1.9.15.1.6 unsigned32 read-only
The number of forwarding port in this group
                               igmpSnoopFilterStatus 1.3.6.1.4.1.259.8.1.11.1.9.17 enabledstatus read-write
Parameter to enable or disable IGMP filtering on the device.
                               igmpSnoopProfileTable 1.3.6.1.4.1.259.8.1.11.1.9.18 no-access
The table for configuring the IGMP snooping profile.
                                     igmpSnoopProfileEntry 1.3.6.1.4.1.259.8.1.11.1.9.18.1 no-access
The entry for configuring the IGMP snooping profile.
                                         igmpSnoopProfileId 1.3.6.1.4.1.259.8.1.11.1.9.18.1.1 unsigned32 no-access
The ID of the IGMP snooping profile.
                                         igmpSnoopProfileAction 1.3.6.1.4.1.259.8.1.11.1.9.18.1.2 integer read-write
The access mode of the IGMP snooping profile. Enumeration: 'deny': 2, 'permit': 1.
                                         igmpSnoopProfileStatus 1.3.6.1.4.1.259.8.1.11.1.9.18.1.3 validstatus read-write
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                               igmpSnoopProfileCtl 1.3.6.1.4.1.259.8.1.11.1.9.19
                                     igmpSnoopProfileCtlId 1.3.6.1.4.1.259.8.1.11.1.9.19.1 unsigned32 read-write
The ID of the IGMP snooping profile. The default value is zero, meaning that no ID is specified. In order to create a profile, a non-zero value must be specified.
                                     igmpSnoopProfileCtlInetAddressType 1.3.6.1.4.1.259.8.1.11.1.9.19.2 inetaddresstype read-write
The address type is associated with this agent. Only ipv4(1) type is supported.
                                     igmpSnoopProfileCtlStartInetAddress 1.3.6.1.4.1.259.8.1.11.1.9.19.3 inetaddress read-write
The specified addresses in the start of the controlled IP multicast addresses.
                                     igmpSnoopProfileCtlEndInetAddress 1.3.6.1.4.1.259.8.1.11.1.9.19.4 inetaddress read-write
The specified addresses in the end of the controlled IP multicast addresses.
                                     igmpSnoopProfileCtlAction 1.3.6.1.4.1.259.8.1.11.1.9.19.5 integer read-write
Setting it to create(2) creates the range of the controlled IP multicast addresses. Setting it to destroy(3) destroys the range of the controlled IP multicast addresses. When the action is completed, this object becomes noAction(1). Enumeration: 'destroy': 3, 'create': 2, 'noAction': 1.
                               igmpSnoopProfileRangeTable 1.3.6.1.4.1.259.8.1.11.1.9.20 no-access
The table for configuring the range of the IGMP snooping profile.
                                     igmpSnoopProfileRangeEntry 1.3.6.1.4.1.259.8.1.11.1.9.20.1 no-access
The entry for configuring the range of the IGMP snooping profile.
                                         igmpSnoopProfileRangeProfileId 1.3.6.1.4.1.259.8.1.11.1.9.20.1.1 unsigned32 no-access
This is defined as igmpSnoopProfileId.
                                         igmpSnoopProfileRangeInetAddressType 1.3.6.1.4.1.259.8.1.11.1.9.20.1.2 inetaddresstype no-access
The address type is associated with this agent. Only ipv4(1) type is supported.
                                         igmpSnoopProfileRangeStartInetAddress 1.3.6.1.4.1.259.8.1.11.1.9.20.1.3 inetaddress no-access
The specified addresses in the start of the controlled IP multicast addresses.
                                         igmpSnoopProfileRangeEndInetAddress 1.3.6.1.4.1.259.8.1.11.1.9.20.1.4 inetaddress read-only
The specified addresses in the end of the controlled IP multicast addresses.
                                         igmpSnoopProfileRangeAction 1.3.6.1.4.1.259.8.1.11.1.9.20.1.5 integer read-only
The access mode of the IGMP snooping profile. Enumeration: 'deny': 2, 'permit': 1.
                               igmpSnoopFilterPortTable 1.3.6.1.4.1.259.8.1.11.1.9.21 no-access
Table for port configuration in IGMP filtering.
                                     igmpSnoopFilterPortEntry 1.3.6.1.4.1.259.8.1.11.1.9.21.1 no-access
Entry for port configuration in IGMP filtering.
                                         igmpSnoopFilterPortIndex 1.3.6.1.4.1.259.8.1.11.1.9.21.1.1 unsigned32 no-access
The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.
                                         igmpSnoopFilterPortProfileId 1.3.6.1.4.1.259.8.1.11.1.9.21.1.2 integer32 read-write
The igmpSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the igmpSnoopProfileId object. If there is no corresponding entry in the igmpSnoopProfileTable, then no association exists. In particular, if this value is zero, no associated profile will be generated, as zero is not a valid profile index.
                               igmpSnoopThrottlePortTable 1.3.6.1.4.1.259.8.1.11.1.9.22 no-access
Table for port configuration in IGMP throttling.
                                     igmpSnoopThrottlePortEntry 1.3.6.1.4.1.259.8.1.11.1.9.22.1 no-access
Entry for port configuration in IGMP throttling.
                                         igmpSnoopThrottlePortIndex 1.3.6.1.4.1.259.8.1.11.1.9.22.1.1 unsigned32 no-access
The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.
                                         igmpSnoopThrottlePortRunningStatus 1.3.6.1.4.1.259.8.1.11.1.9.22.1.2 truthvalue read-only
Describes the running status of the IGMP throttling to the switch. A value of true(1) indicates the IGMP throttling mechanism is active. A value of false(2) indicates the IGMP throttling mechanism is inactive.
                                         igmpSnoopThrottlePortAction 1.3.6.1.4.1.259.8.1.11.1.9.22.1.3 integer read-write
The action mode of the IGMP throttling. A value of replace(1) means to replace a joined multicast group randomly when an interface receives an IGMP report and the number of current joined multicast groups is equal to the maximum number of IGMP groups that the interface can join. A value of deny(2) means to deny the IGMP report request when an interface receives an IGMP report and the number of current joined multicast groups is equal to the maximum number of IGMP groups that the interface can join. Enumeration: 'deny': 2, 'replace': 1.
                                         igmpSnoopThrottlePortMaxGroups 1.3.6.1.4.1.259.8.1.11.1.9.22.1.4 integer32 read-write
The maximum number of IGMP groups that the interface can join.
                                         igmpSnoopThrottlePortCurrentGroups 1.3.6.1.4.1.259.8.1.11.1.9.22.1.5 integer32 read-only
The current number of IGMP groups that the interface has joined.
                               igmpSnoopPortTable 1.3.6.1.4.1.259.8.1.11.1.9.27 no-access
Table of IGMP Snooping service per port.
                                     igmpSnoopPortEntry 1.3.6.1.4.1.259.8.1.11.1.9.27.1 no-access
Entry of IGMP Snooping service per port.
                                         igmpSnoopPortIndex 1.3.6.1.4.1.259.8.1.11.1.9.27.1.1 unsigned32 no-access
The port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                         igmpSnoopQueryDrop 1.3.6.1.4.1.259.8.1.11.1.9.27.1.3 integer read-write
Parameter to enable or disable dropping IGMP Query packet. Enumeration: 'enable': 1, 'disable': 2.
                                         igmpSnoopMulticastDataDrop 1.3.6.1.4.1.259.8.1.11.1.9.27.1.4 integer read-write
Parameter to enable or disable dropping IP multicast data Enumeration: 'enable': 1, 'disable': 2.
                                         igmpSnoopPortNumGroups 1.3.6.1.4.1.259.8.1.11.1.9.27.1.5 unsigned32 read-only
Current learned groups
                                         igmpSnoopPortNumJoinSend 1.3.6.1.4.1.259.8.1.11.1.9.27.1.6 unsigned32 read-only
Number of join send
                                         igmpSnoopPortNumJoins 1.3.6.1.4.1.259.8.1.11.1.9.27.1.7 unsigned32 read-only
Number of join recieved
                                         igmpSnoopPortNumJoinSuccess 1.3.6.1.4.1.259.8.1.11.1.9.27.1.8 unsigned32 read-only
Number of join group success
                                         igmpSnoopPortNumLeavesSend 1.3.6.1.4.1.259.8.1.11.1.9.27.1.9 unsigned32 read-only
Number of leave send
                                         igmpSnoopPortNumLeaves 1.3.6.1.4.1.259.8.1.11.1.9.27.1.10 unsigned32 read-only
Number of leave received
                                         igmpSnoopPortNumGeneralQuerySend 1.3.6.1.4.1.259.8.1.11.1.9.27.1.11 unsigned32 read-only
Number of general query send.
                                         igmpSnoopPortNumGeneralQueryRecevied 1.3.6.1.4.1.259.8.1.11.1.9.27.1.12 unsigned32 read-only
Number of general query received.
                                         igmpSnoopPortNumSepcificQuerySend 1.3.6.1.4.1.259.8.1.11.1.9.27.1.13 unsigned32 read-only
Number of specific query send.
                                         igmpSnoopPortNumSpecificQueryReceived 1.3.6.1.4.1.259.8.1.11.1.9.27.1.14 unsigned32 read-only
Number of specific query received.
                                         igmpSnoopPortNumInvalidReport 1.3.6.1.4.1.259.8.1.11.1.9.27.1.15 unsigned32 read-only
Number of invalid report received.
                                         igmpSnoopPortClearStatistics 1.3.6.1.4.1.259.8.1.11.1.9.27.1.16 truthvalue read-write
Clear this VLAN all statistics
                                         igmpSnoopAuthentication 1.3.6.1.4.1.259.8.1.11.1.9.27.1.17 integer read-write
Parameter to enable or disable IGMP Authentication Enumeration: 'enable': 1, 'disable': 2.
                               igmpSnoopGlobalMgt 1.3.6.1.4.1.259.8.1.11.1.9.28
                                     igmpSnoopProxyReporting 1.3.6.1.4.1.259.8.1.11.1.9.28.1 enabledstatus read-write
Parameter to enable or disable IGMP snooping proxy reporting on the device.
                                     igmpSnoopRouterAlertOptionCheck 1.3.6.1.4.1.259.8.1.11.1.9.28.2 enabledstatus read-write
Parameter to enable or disable IGMP snooping router alert option check on the device.
                                     igmpSnoopTcnFlood 1.3.6.1.4.1.259.8.1.11.1.9.28.3 enabledstatus read-write
Parameter to enable or disable IGMP snooping tcn flood on the device.
                                     igmpSnoopTcnQuerySolicit 1.3.6.1.4.1.259.8.1.11.1.9.28.4 enabledstatus read-write
Parameter to enable or disable IGMP snooping tcn query solicit on the device.
                                     igmpSnoopUnregisteredDataFlood 1.3.6.1.4.1.259.8.1.11.1.9.28.5 enabledstatus read-write
Parameter to enable or disable IGMP snooping Unregistered data flood solicit on the device.
                                     igmpSnoopUnsolicitedReportInterval 1.3.6.1.4.1.259.8.1.11.1.9.28.6 unsigned32 read-write
Setting this value to specify how long (in seconds) the uplink ports should transmit unsolicited reports.
                                     igmpSnoopVersionExclusive 1.3.6.1.4.1.259.8.1.11.1.9.28.7 enabledstatus read-write
Parameter to enable or disable IGMP snooping version exclusive on the device.
                                     igmpSnoopMrouterForwardMode 1.3.6.1.4.1.259.8.1.11.1.9.28.8 integer read-write
Paremete to set IGMP snooping Mrouter port forward mode. When set dynamic, IGMP snooping Mrouter port won't forward multicast streams received from other mrouter port. When set forward, IGMP snooping Mrouter port will forward multicast streams received from other mrouter port. Enumeration: 'forward': 2, 'dynamic': 1.
                               igmpSnoopForwardingPriority 1.3.6.1.4.1.259.8.1.11.1.9.29 integer32 read-write
Configure IGMP snooping multicast stream forwarding priority. If value is 65535, it means the priority is disabled
                               igmpSnoopQueryDropTable 1.3.6.1.4.1.259.8.1.11.1.9.30 no-access
Table of IGMP Snooping query drop per vlan and per vlan configuration.
                                     igmpSnoopQueryDropEntry 1.3.6.1.4.1.259.8.1.11.1.9.30.1 no-access
Entry of IGMP Snooping service per port and per VLAN.
                                         igmpSnoopQueryDropPortIndex 1.3.6.1.4.1.259.8.1.11.1.9.30.1.1 unsigned32 no-access
The port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                         igmpSnoopQueryDropVlanBitmap 1.3.6.1.4.1.259.8.1.11.1.9.30.1.2 octet string read-write
The VLAN bitmap which query drop applied on this port. If all zero, it means disable, For all VLAN, please use igmpSnoopPortTable to configure.
                               igmpSnoopClearDynamicGroups 1.3.6.1.4.1.259.8.1.11.1.9.32 truthvalue read-write
The current number of IGMP groups that the interface has joined.
                               igmpSnoopVlanTable 1.3.6.1.4.1.259.8.1.11.1.9.33 no-access
Table of IGMP Snooping service per port.
                                     igmpSnoopVlanEntry 1.3.6.1.4.1.259.8.1.11.1.9.33.1 no-access
Entry of IGMP Snooping service per VLAN.
                                         igmpSnoopVlanIndex 1.3.6.1.4.1.259.8.1.11.1.9.33.1.1 vlanindex no-access
VLAN ID
                                         igmpSnoopVlanNumGroups 1.3.6.1.4.1.259.8.1.11.1.9.33.1.2 unsigned32 read-only
Current learned groups
                                         igmpSnoopVlanNumJoinSend 1.3.6.1.4.1.259.8.1.11.1.9.33.1.3 unsigned32 read-only
Number of join send.
                                         igmpSnoopVlanNumJoins 1.3.6.1.4.1.259.8.1.11.1.9.33.1.4 unsigned32 read-only
Number of join received
                                         igmpSnoopVlanNumJoinSuccess 1.3.6.1.4.1.259.8.1.11.1.9.33.1.5 unsigned32 read-only
Number of jion success
                                         igmpSnoopVlanNumLeavesSend 1.3.6.1.4.1.259.8.1.11.1.9.33.1.6 unsigned32 read-only
Number of leave send.
                                         igmpSnoopVlanNumLeaves 1.3.6.1.4.1.259.8.1.11.1.9.33.1.7 unsigned32 read-only
Number of leave received
                                         igmpSnoopVlanNumGeneralQuerySend 1.3.6.1.4.1.259.8.1.11.1.9.33.1.8 unsigned32 read-only
Number of general query send
                                         igmpSnoopVlanNumGeneralQueryRecevied 1.3.6.1.4.1.259.8.1.11.1.9.33.1.9 unsigned32 read-only
Number of general query received
                                         igmpSnoopVlanNumSepcificQuerySend 1.3.6.1.4.1.259.8.1.11.1.9.33.1.10 unsigned32 read-only
Number of specific query send
                                         igmpSnoopVlanNumSpecificQueryReceived 1.3.6.1.4.1.259.8.1.11.1.9.33.1.11 unsigned32 read-only
Number of sepcific query received
                                         igmpSnoopVlanNumInvalidReport 1.3.6.1.4.1.259.8.1.11.1.9.33.1.12 unsigned32 read-only
Number of invalid report received
                                         igmpSnoopVlanClearStatistics 1.3.6.1.4.1.259.8.1.11.1.9.33.1.13 truthvalue read-write
Clear this VLAN statistics
                           ipMgt 1.3.6.1.4.1.259.8.1.11.1.10
                                 netConfigTable 1.3.6.1.4.1.259.8.1.11.1.10.1 no-access
A table of netConfigEntry.
                                     netConfigEntry 1.3.6.1.4.1.259.8.1.11.1.10.1.1 no-access
A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is composed of the ifIndex assigned to the corresponding interface.
                                         netConfigIfIndex 1.3.6.1.4.1.259.8.1.11.1.10.1.1.1 integer32 no-access
The VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table.
                                         netConfigIPAddress 1.3.6.1.4.1.259.8.1.11.1.10.1.1.2 ipaddress no-access
The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
                                         netConfigSubnetMask 1.3.6.1.4.1.259.8.1.11.1.10.1.1.3 ipaddress no-access
The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
                                         netConfigPrimaryInterface 1.3.6.1.4.1.259.8.1.11.1.10.1.1.4 integer read-only
Whether this is a primary interface. Enumeration: 'primary': 1, 'secondary': 2.
                                         netConfigUnnumbered 1.3.6.1.4.1.259.8.1.11.1.10.1.1.5 integer read-only
Whether this is an unnumbered interface. Enumeration: 'unnumbered': 1, 'notUnnumbered': 2.
                                         netConfigStatus 1.3.6.1.4.1.259.8.1.11.1.10.1.1.6 rowstatus read-only
The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB.
                                 netDefaultGateway 1.3.6.1.4.1.259.8.1.11.1.10.2 ipaddress read-write
The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
                                 ipHttpState 1.3.6.1.4.1.259.8.1.11.1.10.3 enabledstatus read-write
Whether HTTP is enabled.
                                 ipHttpPort 1.3.6.1.4.1.259.8.1.11.1.10.4 integer32 read-write
The port number for HTTP.
                                 ipDhcpRestart 1.3.6.1.4.1.259.8.1.11.1.10.5 integer read-write
When set to restart(1) the DHCP server will restart. When read, this value always returns noRestart(2). Enumeration: 'noRestart': 2, 'restart': 1.
                                 ipHttpsState 1.3.6.1.4.1.259.8.1.11.1.10.6 enabledstatus read-write
Whether HTTPS is enabled.
                                 ipHttpsPort 1.3.6.1.4.1.259.8.1.11.1.10.7 integer32 read-write
The port number for HTTPS.
                                 dhcpMgt 1.3.6.1.4.1.259.8.1.11.1.10.11
                                       dhcpClient 1.3.6.1.4.1.259.8.1.11.1.10.11.1
                                           dhcpcOptions 1.3.6.1.4.1.259.8.1.11.1.10.11.1.1
                                               dhcpcInterfaceTable 1.3.6.1.4.1.259.8.1.11.1.10.11.1.1.1 no-access
Table for DHCP client information listed by interface. Depending on the nature of the product, this table may have only one entry(e.g. for the management VLAN), or may have many entries(e.g. for all ports, or for all static VLANs).
                                                   dhcpcInterfaceEntry 1.3.6.1.4.1.259.8.1.11.1.10.11.1.1.1.1 no-access
Entry for DHCP client information listed by interface.
                                                       dhcpcIfIndex 1.3.6.1.4.1.259.8.1.11.1.10.11.1.1.1.1.1 integer32 no-access
This is defined by ifIndex in the IF-MIB.(static vlan if index)
                                                       dhcpcIfVendorClassIdMode 1.3.6.1.4.1.259.8.1.11.1.10.11.1.1.1.1.4 integer read-write
Whether the vendor class ID is in text mode or in Hex mode. Enumeration: 'text': 2, 'hex': 3, 'notSpecify': 1.
                                                       dhcpcIfVendorClassId 1.3.6.1.4.1.259.8.1.11.1.10.11.1.1.1.1.5 octet string read-write
The value that the DHCP client sets in the vendor class_id option of DHCPDISCOVER and DHCPREQUEST messages. This value may be used by DHCP servers to identify vendor classof the client.
                                       dhcpOption82 1.3.6.1.4.1.259.8.1.11.1.10.11.4
                                           dhcpOption82Status 1.3.6.1.4.1.259.8.1.11.1.10.11.4.1 integer read-write
Set enabled(1) to enable DHCP Relay Option 82, set disabled(2) to disable it. Enumeration: 'disabled': 2, 'enabled': 1.
                                           dhcpOption82Policy 1.3.6.1.4.1.259.8.1.11.1.10.11.4.2 integer read-write
Provide three policies to handle packet Enumeration: 'replace': 2, 'drop': 1, 'keep': 3.
                                           dhcpOption82RemoteIDMode 1.3.6.1.4.1.259.8.1.11.1.10.11.4.3 integer read-write
Provide five mode for insertion remote-id sub-option of option 82. If configured-string(5) has been set, dhcpOption82RemoteIDString will take effect. Enumeration: 'mac-address-in-hex': 1, 'mac-address-in-ascii': 2, 'configured-string': 5, 'ip-address-in-hex': 3, 'ip-address-in-ascii': 4.
                                           dhcpOption82RemoteIDString 1.3.6.1.4.1.259.8.1.11.1.10.11.4.4 octet string read-write
Set string to remote-id sub-option of option 82. It only take effect when dhcpOption82RemoteIDMode is set to configured-string(5)
                                           dhcpOption82EncodeFormat 1.3.6.1.4.1.259.8.1.11.1.10.11.4.5 integer read-write
Set encode format for CID and RID in option82. Set extra-subtype-included(1) will have extra subtype and length field in CID and RID. Set no-extra-subtype-included(2) will only have TLV format for CID and RID. Enumeration: 'extra-subtype-included': 1, 'no-extra-subtype-included': 2.
                                           dhcpOption82RelayServerAddrTable 1.3.6.1.4.1.259.8.1.11.1.10.11.4.6 no-access
This table is to specify relay server IP address, the maximum number of server IP addresses user can specify is 5.
                                               dhcpOption82RelayServerAddrEntry 1.3.6.1.4.1.259.8.1.11.1.10.11.4.6.1 no-access
A conceptual row of dhcpOption82RelayServerAddrTable.
                                                   dhcpOption82RelayServerAddrIndex 1.3.6.1.4.1.259.8.1.11.1.10.11.4.6.1.1 integer32 no-access
The index of the relay server IP address.
                                                   dhcpOption82RelayServerAddrServerIp 1.3.6.1.4.1.259.8.1.11.1.10.11.4.6.1.2 ipaddress read-write
The IP address of the relay server.
                                       dhcpDynamicProvisionStatus 1.3.6.1.4.1.259.8.1.11.1.10.11.6 enabledstatus read-write
A per-system enable/disable configuration to decide whether to use the specified configuration file in DHCP packet. It shall use the specified configuration file in DHCP packet if this configuration is disabled and the start-up configuration file is Factory_Default_Config.cfg.
                                 pingMgt 1.3.6.1.4.1.259.8.1.11.1.10.15
                                       pingIpAddress 1.3.6.1.4.1.259.8.1.11.1.10.15.1 ipaddress read-write
Specifies the IP address of the device that is planned to ping.
                                       pingPacketSize 1.3.6.1.4.1.259.8.1.11.1.10.15.2 integer32 read-write
Specifies the size of each data potion of ping packets in bytes.
                                       pingCompleted 1.3.6.1.4.1.259.8.1.11.1.10.15.4 truthvalue read-only
A value of true(1) will be read when this ping operation has been either responded to or changed to the time-out status. A value of false(2) will be read when there is a ping operation running and all associated objects in the pingMgt operation cannot be modified during this period.
                                       pingAction 1.3.6.1.4.1.259.8.1.11.1.10.15.5 integer read-write
The action of the pingMgt operation. Sets these objects to pingStart(2) to begin the ping operation. Once the action is set to pingStart(2), the associated pingMgt objects cannot be modified until this ping operation is completed (pingCompleted is true). When the ping has ended or there is no ping operation performing, this object will get a value of noAction(1). Enumeration: 'pingStart': 2, 'noAction': 1.
                                       pingProbeCount 1.3.6.1.4.1.259.8.1.11.1.10.15.6 integer read-write
Specifies the number of times to perform a ping operation at a remote host.
                                       pingSentPackets 1.3.6.1.4.1.259.8.1.11.1.10.15.7 integer read-only
The value of this object reflects the number of probes sent. The value of this object must be reported as 0 when no probes have been sent.
                                       pingReceivedPackets 1.3.6.1.4.1.259.8.1.11.1.10.15.8 integer read-only
Number of responses received. The value of this object must be reported as 0 when no probe responses have been received.
                                       pingPacketLossRate 1.3.6.1.4.1.259.8.1.11.1.10.15.9 integer read-only
Packet loss rate of this ping operation. This variable is calculated by pingReceivedPackets and pingSentPackets. The rate is expressed as a percentage.
                                       pingHistoryTable 1.3.6.1.4.1.259.8.1.11.1.10.15.10 no-access
Contains the executive result information for the ping operation.
                                             pingHistoryEntry 1.3.6.1.4.1.259.8.1.11.1.10.15.10.1 no-access
A conceptual row in the pingHistory table.
                                                 pingHistoryIndex 1.3.6.1.4.1.259.8.1.11.1.10.15.10.1.1 integer32 no-access
A new entry in this table is created when the result of a ping probe is determined. The old entries will be cleared when a new ping action is started.
                                                 pingHistoryResponse 1.3.6.1.4.1.259.8.1.11.1.10.15.10.1.2 integer32 read-only
This variable represents the round trip time and is measured in milliseconds. The variable is the difference between received time and sent time for a ping probe. If the difference value is more than the time-out value or no response is received, then the variable will be 5000 milliseconds.
                                 arpCacheDeleteAll 1.3.6.1.4.1.259.8.1.11.1.10.17 integer read-write
To delete all dynamic entries in the ARP cache, write this variable to delete(1). Writing this variable to noDelete(2) has no effect on the device. When read, this variable always returns noDelete(2). This object is only for Layer 2 switch. Enumeration: 'noDelete': 2, 'delete': 1.
                           vlanMgt 1.3.6.1.4.1.259.8.1.11.1.12
                                 vlanTable 1.3.6.1.4.1.259.8.1.11.1.12.1 no-access
Table for VLAN configuration.
                                     vlanEntry 1.3.6.1.4.1.259.8.1.11.1.12.1.1 no-access
Entry for VLAN configuration.
                                         vlanIndex 1.3.6.1.4.1.259.8.1.11.1.12.1.1.1 unsigned32 no-access
Based on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface.
                                         vlanAddressMethod 1.3.6.1.4.1.259.8.1.11.1.12.1.1.2 integer read-write
Method to get the IP address. Enumeration: 'dhcp': 3, 'user': 1, 'bootp': 2.
                                 vlanPortTable 1.3.6.1.4.1.259.8.1.11.1.12.2 no-access
Table for port configuration in VLAN.
                                     vlanPortEntry 1.3.6.1.4.1.259.8.1.11.1.12.2.1 no-access
Entry for port configuration in VLAN.
                                         vlanPortIndex 1.3.6.1.4.1.259.8.1.11.1.12.2.1.1 integer32 no-access
The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qPvid in the Q-BRIDGE-MIB.
                                         vlanPortMode 1.3.6.1.4.1.259.8.1.11.1.12.2.1.2 integer read-write
This variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to access(3) sets an access link. Enumeration: 'access': 3, 'dot1qTrunk': 2, 'hybrid': 1.
                                         vlanPortPrivateVlanType 1.3.6.1.4.1.259.8.1.11.1.12.2.1.3 integer read-write
The port type defined for private VLAN. Enumeration: 'community': 3, 'isolated': 2, 'promiscous': 4, 'normal': 1.
                                 voiceVlanMgt 1.3.6.1.4.1.259.8.1.11.1.12.6
                                     voiceVlanOuiTable 1.3.6.1.4.1.259.8.1.11.1.12.6.1 no-access
A table containing the mac address which can be identified by Voice VLAN.
                                         voiceVlanOuiEntry 1.3.6.1.4.1.259.8.1.11.1.12.6.1.1 no-access
A table containing the mac address which can be identified by Voice VLAN.
                                             voiceVlanOuiAddress 1.3.6.1.4.1.259.8.1.11.1.12.6.1.1.1 macaddress read-only
MAC address can be identified by voice vlan.
                                             voiceVlanOuiMask 1.3.6.1.4.1.259.8.1.11.1.12.6.1.1.2 macaddress read-write
The mask of MAC address.
                                             voiceVlanOuiDescription 1.3.6.1.4.1.259.8.1.11.1.12.6.1.1.3 displaystring read-write
The description of OUI.
                                             voiceVlanOuiStatus 1.3.6.1.4.1.259.8.1.11.1.12.6.1.1.4 validstatus read-only
Current operation status of the row.
                                     voiceVlanEnabledId 1.3.6.1.4.1.259.8.1.11.1.12.6.2 integer read-write
Voice VLAN enabled status and VLAN ID: enabled (1..4093), disabled (-1).
                                     voiceVlanAgingTime 1.3.6.1.4.1.259.8.1.11.1.12.6.3 integer read-write
Voice VLAN aging time, the unit of which is minute.
                                     voiceVlanPortTable 1.3.6.1.4.1.259.8.1.11.1.12.6.7 no-access
A list of voice VLAN port entries.
                                         voiceVlanPortEntry 1.3.6.1.4.1.259.8.1.11.1.12.6.7.1 no-access
An entry containing Voice VLAN port information, which is applicable to a Voice VLAN enabled interface.
                                             voiceVlanPortIfIndex 1.3.6.1.4.1.259.8.1.11.1.12.6.7.1.1 integer32 no-access
The index of interface on which Voice VLAN function is enabled.
                                             voiceVlanPortMode 1.3.6.1.4.1.259.8.1.11.1.12.6.7.1.2 integer read-write
Voice VLAN configuration mode status. Enumeration: 'auto': 1, 'none': 3, 'manual': 2.
                                             voiceVlanPortSecurity 1.3.6.1.4.1.259.8.1.11.1.12.6.7.1.3 enabledstatus read-write
If the security is enabled, the port only allows voice traffic for the Voice VLAN.
                                             voiceVlanPortPriority 1.3.6.1.4.1.259.8.1.11.1.12.6.7.1.4 integer read-write
The priority of the voice vlan traffic in the port.
                                             voiceVlanPortRuleOui 1.3.6.1.4.1.259.8.1.11.1.12.6.7.1.5 enabledstatus read-write
The address of voice device is learned from OUI table.
                                             voiceVlanPortRuleLldp 1.3.6.1.4.1.259.8.1.11.1.12.6.7.1.6 enabledstatus read-write
The address of voice device is learned from LLDP discovery.
                                             voiceVlanPortRemainAge 1.3.6.1.4.1.259.8.1.11.1.12.6.7.1.7 displaystring read-only
Remaining aging time, the unit of which is minute.
                                 vlanDot1qTunnelGlobalConfig 1.3.6.1.4.1.259.8.1.11.1.12.8
                                     vlanDot1qTunnelStatus 1.3.6.1.4.1.259.8.1.11.1.12.8.1 enabledstatus read-write
This parameter is used to globally enable/disable 802.1Q Tunneling on the device.
                                 vlanDot1qTunnelPortTable 1.3.6.1.4.1.259.8.1.11.1.12.9 no-access
Table for port configuration in 802.1Q Tunneling.
                                     vlanDot1qTunnelPortEntry 1.3.6.1.4.1.259.8.1.11.1.12.9.1 no-access
Entry for port configuration in 802.1Q Tunneling.
                                         vlanDot1qTunnelPortIndex 1.3.6.1.4.1.259.8.1.11.1.12.9.1.1 interfaceindex no-access
The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                         vlanDot1qTunnelPortMode 1.3.6.1.4.1.259.8.1.11.1.12.9.1.2 integer read-write
This variable sets the 802.1Q Tunneling mode. Setting it to none(1) indicates no mode in this port. Setting it to access(2) sets as dot1q-tunnel mode port which link to customer. Setting it to uplink(3) sets as dot1q-tunnel mode port which link to service-provider. If vlanDot1qTunnelStatus is disabled, it means vlanDot1qTunnelPortMode is inactive. Enumeration: 'access': 2, 'none': 1, 'uplink': 3.
                                         vlanDot1qTunnelPortEtherType 1.3.6.1.4.1.259.8.1.11.1.12.9.1.3 unsigned32 read-write
TPID for 802.1Q encapsulation. It's used to select a nonstandard (nondefault) 2-byte ethertype to identify 802.1Q tagged frames.
                                         vlanDot1qTunnelPortPriorityMapStatus 1.3.6.1.4.1.259.8.1.11.1.12.9.1.4 enabledstatus read-write
Status of priority mapping. Set to enabled(1) to use 802.1p priority of inner tag as packet's priority instead of using outer tag.
                                 dot1vProtocolExPortTable 1.3.6.1.4.1.259.8.1.11.1.12.10 no-access
A table that contains protocol Vlan priority information.
                                       dot1vProtocolExPortEntry 1.3.6.1.4.1.259.8.1.11.1.12.10.1 no-access
A list of protocol VLAN user priority sets for each port.
                                           dot1vProtocolExPortGroupPriority 1.3.6.1.4.1.259.8.1.11.1.12.10.1.1 integer read-write
Specifies the priority in the added tag for qualified frames.
                                 macVlanTable 1.3.6.1.4.1.259.8.1.11.1.12.11 no-access
A table that contains the settings for MAC-based VLAN.
                                       macVlanEntry 1.3.6.1.4.1.259.8.1.11.1.12.11.1 no-access
A conceptual row in the macVlanTable.
                                           macVlanMacAddress 1.3.6.1.4.1.259.8.1.11.1.12.11.1.1 macaddress no-access
The MAC address that may specify an entry in the table which contains MAC-based VLAN information.
                                           macVlanId 1.3.6.1.4.1.259.8.1.11.1.12.11.1.2 vlanid read-only
Specifies the VLAN ID which the MAC address associates with.
                                           macVlanPriority 1.3.6.1.4.1.259.8.1.11.1.12.11.1.3 integer32 read-only
Specifies the priority whcich the MAC address associates with.
                                           macVlanStatus 1.3.6.1.4.1.259.8.1.11.1.12.11.1.4 validstatus read-only
Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry.
                                           macVlanMacMask 1.3.6.1.4.1.259.8.1.11.1.12.11.1.5 macaddress no-access
The MAC address mask that may specify an entry in the table which contains MAC-based VLAN information.
                                 macVlanClearAction 1.3.6.1.4.1.259.8.1.11.1.12.12 integer read-write
Action for clearing macVlanTable. When this object is set to clear(2), all entries in macVlanTable will be cleared. When this object is read, the value of this object is always noClear(1). Enumeration: 'clear': 2, 'noClear': 1.
                                 subnetVlanTable 1.3.6.1.4.1.259.8.1.11.1.12.13 no-access
A table that contains the settings for IP subnet-based VLAN.
                                       subnetVlanEntry 1.3.6.1.4.1.259.8.1.11.1.12.13.1 no-access
A conceptual row in the subnetVlanTable.
                                           subnetVlanIpAddress 1.3.6.1.4.1.259.8.1.11.1.12.13.1.1 ipaddress no-access
The IPv4 address of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the subnetVlanMask object is not equal to x.
                                           subnetVlanMask 1.3.6.1.4.1.259.8.1.11.1.12.13.1.2 ipaddress no-access
The netmask of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the subnetVlanIpAddress object is not equal to subnetVlanIpAddress.
                                           subnetVlanId 1.3.6.1.4.1.259.8.1.11.1.12.13.1.3 integer32 read-only
Specifies the VLAN ID which the subnet associates with.
                                           subnetVlanPriority 1.3.6.1.4.1.259.8.1.11.1.12.13.1.4 integer32 read-only
Specifies the priority whcich the subnet associates with.
                                           subnetVlanStatus 1.3.6.1.4.1.259.8.1.11.1.12.13.1.5 validstatus read-only
Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry.
                                 subnetVlanClearAction 1.3.6.1.4.1.259.8.1.11.1.12.14 integer read-write
Action for clearing subnetVlanTable. When this object is set to clear(2), all entries in subnetVlanTable will be cleared. When this object is read, the value of this object is always noClear(1). Enumeration: 'clear': 2, 'noClear': 1.
                                 vlanStaticExtTable 1.3.6.1.4.1.259.8.1.11.1.12.15 no-access
The extension table of dot1qVlanStaticTable. This table enhances the original table with extra vlanStaticExtRspanStatus to create and destroy RSPAN VLAN(s).
                                       vlanStaticExtEntry 1.3.6.1.4.1.259.8.1.11.1.12.15.1 no-access
A conceptual row in the vlanStaticExtTable.
                                           vlanStaticExtRspanStatus 1.3.6.1.4.1.259.8.1.11.1.12.15.1.1 integer read-only
Displays type of a VLAN is vlan(2) or rspanVlan(3). Set this to destroy(1) to destroy a RSPAN VLAN. Set this to rspanVlan(3) to create a RSPAN VLAN. Setting this to vlan(2) is not allowed. Enumeration: 'rspanVlan': 3, 'destroy': 1, 'vlan': 2.
                                 vlanL2ProtocolTunnelPortTable 1.3.6.1.4.1.259.8.1.11.1.12.16 no-access
Table for port configuration in Layer 2 Protocol Tunneling.
                                       vlanL2ProtocolTunnelPortEntry 1.3.6.1.4.1.259.8.1.11.1.12.16.1 no-access
Entry for port configuration in Layer 2 Protocol Tunneling.
                                           vlanL2ptPortIndex 1.3.6.1.4.1.259.8.1.11.1.12.16.1.1 interfaceindex no-access
The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                           vlanL2ptPortSta 1.3.6.1.4.1.259.8.1.11.1.12.16.1.2 enabledstatus read-only
Set enabled(1) to enable Layer 2 protocol tunneling for spanning-tree protocol. Set disabled(2) to disable Layer 2 protocol tunneling for spanning-tree protocol.
                                           vlanL2ptPortLldp 1.3.6.1.4.1.259.8.1.11.1.12.16.1.3 enabledstatus read-write
Set enabled(1) to enable Layer 2 protocol tunneling for LLDP. Set disabled(2) to disable Layer 2 protocol tunneling for LLDP.
                                           vlanL2ptPortCdp 1.3.6.1.4.1.259.8.1.11.1.12.16.1.4 enabledstatus read-write
Set enabled(1) to enable Layer 2 protocol tunneling for Cisco Discovery Protocol. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco Discovery Protocol.
                                           vlanL2ptPortVtp 1.3.6.1.4.1.259.8.1.11.1.12.16.1.5 enabledstatus read-write
Set enabled(1) to enable Layer 2 protocol tunneling for Cisco VTP. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco VTP.
                                           vlanL2ptPortPvst 1.3.6.1.4.1.259.8.1.11.1.12.16.1.6 enabledstatus read-write
Set enabled(1) to enable Layer 2 protocol tunneling for Cisco PVST+. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco PVST+.
                                 vlanStaticTable 1.3.6.1.4.1.259.8.1.11.1.12.17 no-access
Table for static VLAN configuration including VLAN aggregation support.
                                       vlanStaticEntry 1.3.6.1.4.1.259.8.1.11.1.12.17.1 no-access
Static information for a VLAN configured on the device by (local or network) management.
                                           vlanStaticIndex 1.3.6.1.4.1.259.8.1.11.1.12.17.1.1 vlanindex no-access
The VLAN ID of the VLAN.
                                           vlanStaticInterfaceType 1.3.6.1.4.1.259.8.1.11.1.12.17.1.2 integer read-only
The interface type of the VLAN (there is a subtype of IANAifType). l2vlan(135) refers to L2 interface and can't accept any L3 related configuration. l3ipvlan(136) refers to L3 interface and can accept L3 related configuration. Enumeration: 'l2vlan': 135, 'l3ipvlan': 136.
                                 vlanDot1qTunnelSrvCvidPortTable 1.3.6.1.4.1.259.8.1.11.1.12.18 no-access
Table for port configuration to specify how to insert outer tag by matching customer VLAN ID.
                                       vlanDot1qTunnelSrvCvidPortEntry 1.3.6.1.4.1.259.8.1.11.1.12.18.1 no-access
Entry for port configuration to specify how to insert outer tag by matching customer VLAN ID.
                                           vlanDot1qTunnelSrvCvidPortIndex 1.3.6.1.4.1.259.8.1.11.1.12.18.1.1 interfaceindex no-access
The port interface of the vlanDot1qTunnelSrvCvidPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                           vlanDot1qTunnelSrvCvidPortCvid 1.3.6.1.4.1.259.8.1.11.1.12.18.1.2 vlanindex no-access
Specifies customer VLAN ID.
                                           vlanDot1qTunnelSrvCvidPortSvid 1.3.6.1.4.1.259.8.1.11.1.12.18.1.3 vlanid read-only
Specifies service VLAN ID.
                                           vlanDot1qTunnelSrvCvidPortStatus 1.3.6.1.4.1.259.8.1.11.1.12.18.1.5 validstatus read-only
Sets to valid(1) to create an entry. Sets to invalid(2) to destroy an entry.
                                           vlanDot1qTunnelSrvCvidPortAction 1.3.6.1.4.1.259.8.1.11.1.12.18.1.6 bits read-only
Sets to assignSvid(2) to assign service VLAN ID. Bits: 'reserved1': 1, 'reserved0': 0, 'assignSvid': 2.
                                 vlanL2ProtocolTunnelGlobalConfig 1.3.6.1.4.1.259.8.1.11.1.12.19
                                       vlanL2ProtocolTunnelAddress 1.3.6.1.4.1.259.8.1.11.1.12.19.1 macaddress read-write
Destination MAC address for PDU tunneling.
                                 vlanMacAddrLearningTable 1.3.6.1.4.1.259.8.1.11.1.12.23 no-access
Table for VLAN MAC learning configuration.
                                       vlanMacAddrLearningEntry 1.3.6.1.4.1.259.8.1.11.1.12.23.1 no-access
Entry for VLAN MAC learning configuration.
                                           vlanMacAddrLearningIndex 1.3.6.1.4.1.259.8.1.11.1.12.23.1.1 unsigned32 no-access
The vlan id of the VLAN
                                           vlanMacAddrLearningStatus 1.3.6.1.4.1.259.8.1.11.1.12.23.1.2 enabledstatus read-write
Set this variable to enabled(1) to start to learn MAC addresses. Set this variable to disabled(2) to stop to learn MAC addresses.
                           priorityMgt 1.3.6.1.4.1.259.8.1.11.1.13
                                 prioIpPrecDscpStatus 1.3.6.1.4.1.259.8.1.11.1.13.1 integer read-write
Selects whether no frame priority mapping, IP ToS precedence mapping or DSCP mapping is performed. Enumeration: 'disabled': 1, 'precedence': 2, 'dscp': 3.
                                 prioIpDscpTable 1.3.6.1.4.1.259.8.1.11.1.13.4 no-access
Table for IP DSCP priority mapping.
                                     prioIpDscpEntry 1.3.6.1.4.1.259.8.1.11.1.13.4.1 no-access
Entry for IP DSCP priority mapping.
                                         prioIpDscpPort 1.3.6.1.4.1.259.8.1.11.1.13.4.1.1 interfaceindex no-access
The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                         prioIpDscpValue 1.3.6.1.4.1.259.8.1.11.1.13.4.1.2 integer32 no-access
Value of IP DSCP as specified in the packet header.
                                         prioIpDscpCos 1.3.6.1.4.1.259.8.1.11.1.13.4.1.3 integer32 read-write
Class of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of Service (CoS). This CoS is then further mapped to the hardware queue according to dot1dTrafficClassTable.
                                 prioIpDscpRestoreDefault 1.3.6.1.4.1.259.8.1.11.1.13.5 integer32 read-write
Enables the IP DSCP settings of a port to be reset to their defaults. To reset the IP DSCP settings of a port, assign the value of the relevant ifIndex defined by the ifIndex in the IF-MIB. For example, assigning the value 1 will result in the IP DSCP settings of port 1 being restored to their default. 0 will always be obtained when reading this variable
                                 prioCopy 1.3.6.1.4.1.259.8.1.11.1.13.8
                                     prioCopyIpDscp 1.3.6.1.4.1.259.8.1.11.1.13.8.2 octet string read-write
Action to copy IP DSCP settings from a source port to many destination ports. The first four octets represent an integer for the source port in high-to-low (big-endian) order. Starting from the 5th octet is the destination port list in a form described by PortList in the Q-BRIDGE-MIB. Writing this object will perform copy. Reading this object will always get a zero-length octet string.
                                 prioWrrTable 1.3.6.1.4.1.259.8.1.11.1.13.9 no-access
Table for weighted round robin (WRR).
                                     prioWrrEntry 1.3.6.1.4.1.259.8.1.11.1.13.9.1 no-access
Entry for weighted round robin (WRR).
                                         prioWrrTrafficClass 1.3.6.1.4.1.259.8.1.11.1.13.9.1.1 integer32 no-access
Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.
                                         prioWrrWeight 1.3.6.1.4.1.259.8.1.11.1.13.9.1.2 integer32 read-write
Weight for this entry.
                                 prioQueueMode 1.3.6.1.4.1.259.8.1.11.1.13.10 integer read-write
The global status for the prioQueue. wrr(1),strict(2) Enumeration: 'strict': 2, 'wrr': 1.
                           trapDestMgt 1.3.6.1.4.1.259.8.1.11.1.14
                                 trapVar 1.3.6.1.4.1.259.8.1.11.1.14.2
                                     trapIpFilterRejectMode 1.3.6.1.4.1.259.8.1.11.1.14.2.6 integer no-access
This variable is for trap var binding, indicated the ipfilter reject mode. web(1), snmp(2), telnet(3). Enumeration: 'web': 1, 'snmp': 2, 'telnet': 3.
                                     trapIpFilterRejectIp 1.3.6.1.4.1.259.8.1.11.1.14.2.7 ipaddress no-access
This variable is for trap var binding, indicating the IP address that rejected by the ipfilter.
                                     trapVarMacAddr 1.3.6.1.4.1.259.8.1.11.1.14.2.10 macaddress no-access
The MAC address.
                                     trapVarLoginUserName 1.3.6.1.4.1.259.8.1.11.1.14.2.11 displaystring no-access
The name of the user who logs into the switch.
                                     trapVarSessionType 1.3.6.1.4.1.259.8.1.11.1.14.2.12 integer no-access
The method by which the user logs in to control the switch. Enumeration: 'web': 1, 'http': 6, 'snmp': 2, 'telnet': 3, 'ssh': 5, 'https': 7, 'console': 4.
                                     trapVarLoginInetAddressType 1.3.6.1.4.1.259.8.1.11.1.14.2.15 inetaddresstype no-access
The address type of the address associated with this agent. Only IPv4 and IPv6 types are supported.
                                     trapVarLoginInetAddress 1.3.6.1.4.1.259.8.1.11.1.14.2.16 inetaddress no-access
The IP address from which the user logs into the switch.
                                     trapIpFilterRejectInetAddressType 1.3.6.1.4.1.259.8.1.11.1.14.2.17 inetaddresstype no-access
This variable is for trap var binding, indicating the IP address that was rejected by the IP filter.
                                     trapIpFilterRejectInetAddress 1.3.6.1.4.1.259.8.1.11.1.14.2.18 inetaddress no-access
This variable is for trap var binding, indicating the IP address that was rejected by the IP filter.
                                     trapAutoUpgradeResult 1.3.6.1.4.1.259.8.1.11.1.14.2.22 integer no-access
The parameter indicates which result triggers the trap. Enumeration: 'failed': 2, 'succeeded': 1.
                                     trapAutoUpgradeNewVer 1.3.6.1.4.1.259.8.1.11.1.14.2.23 displaystring no-access
The parameter indicates new version which was upgraded to. When trapAutoUpgradeResult was failed(2), it would be null string.
                                     trapPortSecurityIntrusionMac 1.3.6.1.4.1.259.8.1.11.1.14.2.29 macaddress no-access
This variable indicates the intrusion MAC address.
                                     trapIfIndex 1.3.6.1.4.1.259.8.1.11.1.14.2.30 unsigned32 no-access
This variable is for trap var binding, indicating the index of an interface.
                                     trapVlanId 1.3.6.1.4.1.259.8.1.11.1.14.2.31 unsigned32 no-access
This variable is for trap var binding, indicating the identifier of a VLAN.
                                     trapDhcpClientPortIfIndex 1.3.6.1.4.1.259.8.1.11.1.14.2.62 integer no-access
ifIndex for the port connected to DHCP rogue server.
                                     trapDhcpServerIpAddress 1.3.6.1.4.1.259.8.1.11.1.14.2.63 displaystring no-access
The IP address of the rogue server.
                                     trapSfpThresholdAlarmWarnIfIndex 1.3.6.1.4.1.259.8.1.11.1.14.2.64 integer no-access
ifIndex for the port issued alarm/warning trap.
                                     trapSfpThresholdAlarmWarnType 1.3.6.1.4.1.259.8.1.11.1.14.2.65 integer no-access
SFP's alarm/warning type . Enumeration: 'voltageHighAlarm': 13, 'rxPowerAlarmWarnCease': 21, 'txPowerLowAlarm': 6, 'rxPowerLowWarning': 4, 'currentLowWarning': 20, 'voltageLowAlarm': 14, 'temperatureHighAlarm': 9, 'temperatureAlarmWarnCease': 23, 'voltageHighWarning': 15, 'currentHighWarning': 19, 'voltageLowWarning': 16, 'currentHighAlarm': 17, 'temperatureHighWarning': 11, 'txPowerAlarmWarnCease': 22, 'currentAlarmWarnCease': 25, 'rxPowerLowAlarm': 2, 'rxPowerHighWarning': 3, 'currentLowAlarm': 18, 'temperatureLowAlarm': 10, 'txPowerLowWarning': 8, 'temperatureLowWarning': 12, 'rxPowerHighAlarm': 1, 'txPowerHighWarning': 7, 'voltageAlarmWarnCease': 24, 'txPowerHighAlarm': 5.
                                     trapUdldPortShutdownReason 1.3.6.1.4.1.259.8.1.11.1.14.2.66 integer no-access
This variable is for trap var binding, indicated the reason for the UDLD port shutdown. unidirectionalLink(1): unidirectional link detected, mismatchWithNeighbor(2): mismatch with neighbor state reported. transmitToReceiveLoop(3): transmit-to-receive loop detected. aggressiveModeFailure(4): aggressive mode failure detected. Enumeration: 'unidirectionalLink': 1, 'transmitToReceiveLoop': 3, 'aggressiveModeFailure': 4, 'mismatchWithNeighbor': 2.
                                     trapDhcpServerMacAddress 1.3.6.1.4.1.259.8.1.11.1.14.2.67 macaddress no-access
The MAC address of the rogue server.
                                     trapVarSnmpAuthenInfoIpAddrType 1.3.6.1.4.1.259.8.1.11.1.14.2.69 inetaddresstype no-access
The IP address type of the user who fails in SNMP authentication.
                                     trapVarSnmpAuthenInfoIpAddr 1.3.6.1.4.1.259.8.1.11.1.14.2.70 inetaddress no-access
The IP address of the user who fails in SNMP authentication.
                                     trapVarSnmpAuthenInfoMacAddr 1.3.6.1.4.1.259.8.1.11.1.14.2.71 macaddress no-access
The MAC address of the user who fails in SNMP authentication.
                           qosMgt 1.3.6.1.4.1.259.8.1.11.1.16
                                 rateLimitMgt 1.3.6.1.4.1.259.8.1.11.1.16.1
                                     rateLimitPortTable 1.3.6.1.4.1.259.8.1.11.1.16.1.2 no-access
Table for rate limit of each port.
                                         rateLimitPortEntry 1.3.6.1.4.1.259.8.1.11.1.16.1.2.1 no-access
Entry for rate limit of each port.
                                             rlPortIndex 1.3.6.1.4.1.259.8.1.11.1.16.1.2.1.1 interfaceindex no-access
The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                             rlPortInputStatus 1.3.6.1.4.1.259.8.1.11.1.16.1.2.1.6 enabledstatus read-write
Whether input rate limit is enabled for this port.
                                             rlPortOutputStatus 1.3.6.1.4.1.259.8.1.11.1.16.1.2.1.7 enabledstatus read-write
Whether output rate limit is enabled for this port.
                                             rlPortInputLimitInKilo 1.3.6.1.4.1.259.8.1.11.1.16.1.2.1.10 integer32 read-write
Value of the input rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 1000000.
                                             rlPortOutputLimitInKilo 1.3.6.1.4.1.259.8.1.11.1.16.1.2.1.11 integer32 read-write
Value of the output rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 1000000.
                                 cosMgt 1.3.6.1.4.1.259.8.1.11.1.16.3
                                     prioIfClassificationModeTable 1.3.6.1.4.1.259.8.1.11.1.16.3.2 no-access
Table for setting the interface Qos mapping classification mode.
                                         prioIfClassificationModeEntry 1.3.6.1.4.1.259.8.1.11.1.16.3.2.1 no-access
Entry for setting the interface Qos mapping classification mode.
                                             prioIfClassificationModeIf 1.3.6.1.4.1.259.8.1.11.1.16.3.2.1.1 interfaceindex no-access
The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                             prioIfClassificationModeStatus 1.3.6.1.4.1.259.8.1.11.1.16.3.2.1.2 integer read-write
The Qos mapping classification mode of the interface. cos mode means that the internal priority is mapped from priority field of packet's VLAN tag if a VLAN tag exists; IP precedence mode means that the internal priority is mapped from the IP precedence value of IP packets; DSCP mode means the internal priority is mapped from the dscp value of IP packets. Enumeration: 'cos': 0, 'dscp': 2, 'ipPrecedence': 1.
                                 diffServMgt 1.3.6.1.4.1.259.8.1.11.1.16.4
                                     diffServPolicyMapTable 1.3.6.1.4.1.259.8.1.11.1.16.4.10 no-access
Table for policy map.
                                           diffServPolicyMapEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.10.1 no-access
Entry for policy map.
                                               diffServPolicyMapIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.10.1.1 integer32 no-access
An index that uniquely identifies an entry in this table.
                                               diffServPolicyMapName 1.3.6.1.4.1.259.8.1.11.1.16.4.10.1.2 displaystring read-only
The name of this entry.
                                               diffServPolicyMapDescription 1.3.6.1.4.1.259.8.1.11.1.16.4.10.1.3 displaystring read-only
The description of this entry.
                                               diffServPolicyMapElementIndexList 1.3.6.1.4.1.259.8.1.11.1.16.4.10.1.4 octet string read-only
The octet string containes the diffServPolicyMapElementEntry indexes. Two octets express one index and it is represented in network order. This index list indicates the diffServPolicyMapEntrys which belong to this entry.
                                               diffServPolicyMapStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.10.1.5 rowstatus read-only
This object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has the value 'active');it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has the value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has the value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB.
                                     diffServPolicyMapAttachCtl 1.3.6.1.4.1.259.8.1.11.1.16.4.11
                                           diffServPolicyMapAttachCtlIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.11.1 integer32 read-write
Index for attachment control. Specifies the policy map as the target to relate with the policy map element. The policy map identified by a particular value of this index is associated with the same diffServPolicyMapEntry as identified by the same value of diffServPolicyMapIndex.
                                           diffServPolicyMapAttachCtlElementIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.11.2 integer32 read-write
Element Index for attachment control.Specifies the policy map element to relate with the policy map. The policy map element identified by a particular value of this index is associated with the same diffServPolicyMapElementEntry as identified by the same value of diffServPolicyMapElementIndex.
                                           diffServPolicyMapAttachCtlAction 1.3.6.1.4.1.259.8.1.11.1.16.4.11.3 integer read-write
Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular policy map element is attached to a particular policy map. When setting this object to detach(3) to begin the not attached operation, a particular policy map element is not attached to a particular policy map. When the action is finshed or no action is taken, the value of this object is noAction(1). A particular policy map is specified in the diffServPolicyMapAttachCtlIndex. A particularpolicy map element is specified in the diffServPolicyMapAttachCtlElementIndex. Enumeration: 'attach': 2, 'detach': 3, 'noAction': 1.
                                     diffServPolicyMapElementTable 1.3.6.1.4.1.259.8.1.11.1.16.4.12 no-access
Table for policy map element.
                                           diffServPolicyMapElementEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.12.1 no-access
Entry for policy map element.
                                               diffServPolicyMapElementIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.12.1.1 integer32 no-access
An index that uniquely identifies an entry in this table.
                                               diffServPolicyMapElementClassMapIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.12.1.2 integer32 read-only
Specifies the class map binding to this entry. The class map identified by a particular value of this index is associated with the same diffServClassMapEntry as identified by the same value of diffServClassMapIndex.
                                               diffServPolicyMapElementMeterIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.12.1.3 integer32 read-only
Specifies the meter binding to this entry. The meter identified by a particular value of this index is associated with the same diffServMeterEntry as identified by the same value of diffServMeterIndex. If this value is zero, no associated meter will be associated, as zero is not a valid meter index.
                                               diffServPolicyMapElementActionIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.12.1.4 integer32 read-only
Specifies the action binding to this entry. The action identified by a particular value of this index is associated with the same diffServActionEntry as identified by the same value of diffServActionIndex.
                                               diffServPolicyMapElementStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.12.1.5 rowstatus read-only
This object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has the value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has the value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has the value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB.
                                     diffServClassMapTable 1.3.6.1.4.1.259.8.1.11.1.16.4.13 no-access
Table for class map.
                                           diffServClassMapEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.13.1 no-access
Entry for class map.
                                               diffServClassMapIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.13.1.1 integer32 no-access
An index that uniquely identifies an entry in this table.
                                               diffServClassMapName 1.3.6.1.4.1.259.8.1.11.1.16.4.13.1.2 displaystring read-only
The name of this entry.
                                               diffServClassMapDescription 1.3.6.1.4.1.259.8.1.11.1.16.4.13.1.3 displaystring read-only
The description of this entry.
                                               diffServClassMapMatchType 1.3.6.1.4.1.259.8.1.11.1.16.4.13.1.4 integer read-only
The map match type of this entry. Enumeration: 'matchAll': 2, 'matchAny': 1.
                                               diffServClassMapElementIndexTypeList 1.3.6.1.4.1.259.8.1.11.1.16.4.13.1.5 octet string read-only
The octet string containes the type of class map element indexes. Two octets which are represented in network order express one type of the class map element index in network order and it maps the index of differServClasssMapElementIndexList in order. When the type is macAce(1), the maping index of differServClasssMapElementIndexList is the diffServMacAceEntry. When the type is ipAce(2), the maping index of differServClasssMapElementIndexList is the diffServIpAceEntry. When the type is acl(3), the maping index of differServClasssMapElementIndexList is the diffServAclEntry. When the type is ipv6Ace(4), the maping index of differServClasssMapElementIndexList is the diffServIpv6AceEntry.
                                               diffServClassMapElementIndexList 1.3.6.1.4.1.259.8.1.11.1.16.4.13.1.6 octet string read-only
The octet string containes the class map element indexes. Two octets express one index and it is represented in network order. This index list indicates the particular class map elements which belong to this table. The class map element uses type to indicate diffServAclEntry, the diffServIpAceEntry or diffServMacAceEntry. The type is two octet specified in differServClasssMapElementIndexTypeList in order. When the type is macAce(1), the maping index of differServClasssMapElementIndexList is the diffServMacAceEntry. When the type is ipAce(2), the maping index of differServClasssMapElementIndexList is the diffServIpAceEntry. When the type is acl(3), the maping index of differServClasssMapElementIndexList is the diffServAclEntry. When type is ipv6Ace(4), the maping index of differServClasssMapElementIndexList is the diffServIpv6AceEntry.
                                               diffServClassMapStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.13.1.7 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table.The status column has six defined values: The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has the value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has the value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has the value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB.
                                     diffServClassMapAttachCtl 1.3.6.1.4.1.259.8.1.11.1.16.4.14
                                           diffServClassMapAttachCtlIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.14.1 integer32 read-write
Index for attachment control. Specifies the class map as the target to relate with class map elements. The class map identified by a particular value of this index is associated with the same diffServClassMapEntry as identified by the same value of diffServClassMapIndex.
                                           diffServClassMapAttachCtlElementIndexType 1.3.6.1.4.1.259.8.1.11.1.16.4.14.2 integer read-write
Element Index for attachment control. Specifies the type of class map element to relate with the class map. When type is macAce(1), the index of diffServClassMapAttachCtlElementIndex is the index of diffServMacAceEntry. When the type is ipAce(2), the index of diffServClassMapAttachCtlElementIndex is the index of diffServIpAceEntry. When the type is acl(3), the index of diffServClassMapAttachCtlElementIndex is the index of diffServAclEntry. When type is ipv6Ace(4), the index of diffServClassMapAttachCtlElementIndex is the index of diffServIpv6AceEntry. Enumeration: 'ipAce': 2, 'ipv6Ace': 4, 'macAce': 1, 'acl': 3.
                                           diffServClassMapAttachCtlElementIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.14.3 integer32 read-write
Element Index for attachment control. Specifies the class map element related with the class map. The class map element uses type to indicate diffServAclEntry, the diffServIpAceEntry or diffServMacAceEntry. The type is specified in diffServClassMapAttachCtlElementIndexType. When the type is macAce(1), the maping index of differServClasssMapElementIndexList is the diffServMacAceEntry. When the type is ipAce(2), the maping index of differServClasssMapElementIndexList is the diffServIpAceEntry. When the type is acl(3), the maping index of differServClasssMapElementIndexList is the diffServAclEntry. When type is ipv6Ace(4), the maping index of differServClasssMapElementIndexList is the diffServIpv6AceEntry.
                                           diffServClassMapAttachCtlAction 1.3.6.1.4.1.259.8.1.11.1.16.4.14.4 integer read-write
Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular class map element is attached to a particular class map. When setting this object to detach(3) to begin the not attached operation, then a particular class map element is not attached to a particular class map. When the action is finshed whether successfully or not, or no action is taken, the value of this object always is noAction(1). The value of a particular class map is specified in the AclAttachCtlTargetIndex. The class map element is specified by diffServClassMapAttachCtlElementIndexType and diffServClassMapAttachCtlElementIndex. Enumeration: 'attach': 2, 'detach': 3, 'noAction': 1.
                                     diffServAclTable 1.3.6.1.4.1.259.8.1.11.1.16.4.15 no-access
Table for ACL.
                                           diffServAclEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.15.1 no-access
Entry for ACL.
                                               diffServAclIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.15.1.1 integer32 no-access
An index that uniquely identifies an entry in the ACL table.
                                               diffServAclName 1.3.6.1.4.1.259.8.1.11.1.16.4.15.1.2 displaystring read-only
The name of this entry.
                                               diffServAclType 1.3.6.1.4.1.259.8.1.11.1.16.4.15.1.3 integer read-only
The type of this entry. When the value of ACL type is modified, then the ACEs in the diffServAclAceIndexList of this entry will be auto-removed, and this entry will be auto- unbound from the diffServPortTable and the diffServClassMapTable. Enumeration: 'arp': 6, 'ipstandard': 2, 'ipv6extended': 5, 'mac': 1, 'ipextended': 3, 'ipv6standard': 4.
                                               diffServAclAceIndexList 1.3.6.1.4.1.259.8.1.11.1.16.4.15.1.4 octet string read-only
The octet string containes the ACE indexes. Two octets express one index and it is represented in network order. This index list indicates the particular ACEs which belong to this table. The ACE uses type to indicate the diffServMacAceEntry, the diffServIpAceEntry, the diffServIpv6AceEntry or the diffServArpAceEntry. The type is specified in diffServAclType. When the type is mac(1), the index of diffServAclAceIndexList is the diffServMacAceEntry. When the type is ipstandard(2) or ipextended(3), the index of diffServAclAceIndexList is the diffServIpAceEntry. When the type is ipv6standard(4) or ipv6extended(5), the index of diffServAclAceIndexList is the diffServIpv6AceEntry. When the type is arp(6), the index of diffServAclAceIndexList is the diffServArpAceEntry.
                                               diffServAclStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.15.1.5 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has the value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has the value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has the value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB.
                                     diffServAclAttachCtl 1.3.6.1.4.1.259.8.1.11.1.16.4.16
                                           diffServAclAttachCtlIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.16.1 integer32 read-write
Index for attachment control. Specifies the ACL as the target to relate with the IP ACE, the MAC ACE or IPv6 ACE. The ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclIndex.
                                           diffServAclAttachCtlAceType 1.3.6.1.4.1.259.8.1.11.1.16.4.16.2 integer read-write
Type for attachment control. Specifies the type of diffServAclAttachCtlAceIndex to relate with the diffServAclAttachCtlIndex. When the type is macAce(1), the index of diffServAclAceIndexList is the diffServMacAceEntry. When the type is ipAce(2), the index of diffServAclAceIndexList is the diffServIpAceEntry. When the type is ipv6Ace(3), the index of diffServAclAceIndexList is the diffServIpv6AceEntry. When the type is arpAce(4), the index of diffServAclAceIndexList is the diffServArpAceEntry. Enumeration: 'ipAce': 2, 'arpAce': 4, 'ipv6Ace': 3, 'macAce': 1.
                                           diffServAclAttachCtlAceIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.16.3 integer32 read-write
Index for attachment control. Specifies the ACE to relate with the diffServAclAttachCtlIndex. When diffServAclAttachCtlAceType is macAce(1), the value of diffServAclAttachCtlIndex is the diffServMacAceEntry. When diffServAclAttachCtlAceType is ipAce(2), the value of diffServAclAttachCtlIndex is the diffServIpAceEntry. When diffServAclAttachCtlAceType is ipv6Ace(3), the value of diffServAclAttachCtlIndex is the diffServIpv6AceEntry. When diffServAclAttachCtlAceType is arpAce(4), the value of diffServAclAttachCtlIndex is the diffServArpAceEntry.
                                           diffServAclAttachCtlAction 1.3.6.1.4.1.259.8.1.11.1.16.4.16.4 integer read-write
Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular ACE is attached to a particular ACL. When setting this object to detach(3) to begin the not attached operation, then a particular ACE is not attached to a particular ACL. When the action is finshed whether successfully or not, or no action is taken, the value of this object always is noAction(1), The value of a particular ACL is specified in the diffServAclAttachCtlAceType and diffServAclAttachCtlAceIndex. Enumeration: 'attach': 2, 'detach': 3, 'noAction': 1.
                                     diffServIpAceTable 1.3.6.1.4.1.259.8.1.11.1.16.4.17 no-access
Table for IP ACE.
                                           diffServIpAceEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1 no-access
Entry for IP ACE.
                                               diffServIpAceIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.1 integer32 no-access
An index that uniquely identifies an entry in the IP ACE table.
                                               diffServIpAceType 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.2 integer read-only
The specified IP ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the diffServAclEntry and the not supporting field of this entry will be set 0. Enumeration: 'extended': 2, 'standard': 1.
                                               diffServIpAceAccess 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.3 integer read-only
Indicates the action to be taken if a packet matches this ACE. Enumeration: 'deny': 2, 'permit': 1.
                                               diffServIpAceSourceIpAddr 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.4 ipaddress read-only
The specified source IP address. The packet's source address is AND-ed with the value of IpAceSourceIpAddrBitmask and then compared against the value of this object.
                                               diffServIpAceSourceIpAddrBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.5 ipaddress read-only
The specified source IP address mask. The packet's source address is AND-ed with the value of IpAceSourceIpAddr and then compared against the value of this object.
                                               diffServIpAceDestIpAddr 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.6 ipaddress read-only
The specified destination IP address. The packet's destination address is AND-ed with the value of diffServIpAceDestIpAddrBitmask and then compared against the value of this object. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
                                               diffServIpAceDestIpAddrBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.7 ipaddress read-only
The specified destination IP address mask. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
                                               diffServIpAceProtocol 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.8 integer32 read-only
The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value of 0 matches every IP packet. The object=256 means 'any'. For example: 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation, 6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH, 88 is IGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP, 103 is PIMv2, 108 is PCP. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
                                               diffServIpAcePrec 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.9 integer32 read-only
Specifies the IP precedence value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 8. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
                                               diffServIpAceTos 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.10 integer32 read-only
Specifies the IP ToS facility value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 9. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
                                               diffServIpAceDscp 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.11 integer32 read-only
Specifies the DSCP value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 64. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
                                               diffServIpAceSourcePortOp 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.12 integer read-only
Indicates how a packet's source TCP/UDP port number is to be compared. noOperator(1), which is the default value, means no comparison is to be made with the source TCP/UDP port number. equal(2), which is used the diffServIpAceSourcePortBitmask and the diffServIpAceMinSourcePort to match against. range(3),which is used the diffServIpAceMinSourcePort and the diffServIpAceMaxSourcePort to match against. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). Enumeration: 'range': 3, 'equal': 2, 'noOperator': 1.
                                               diffServIpAceMinSourcePort 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.13 integer32 read-only
If the diffServIpAceSourcePortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
                                               diffServIpAceSourcePortBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.15 integer32 read-only
If the diffServIpAceSourcePortOp is equal(2), this indicates the bitmask of the diffServIpAceMinSourcePort. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
                                               diffServIpAceDestPortOp 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.16 integer read-only
Indicates how a packet's destination TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made with the destination TCP/UDP port number. equal(2), which is used the diffServIpAceSourcePortBitmask and the diffServIpAceMinDestPort to match against. range(3),which is used the diffServIpAceMinDestPort and the diffServIpAceMaxDestPort to match against. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). Enumeration: 'range': 3, 'equal': 2, 'noOperator': 1.
                                               diffServIpAceMinDestPort 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.17 integer32 read-only
If the diffServIpAceDestPortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
                                               diffServIpAceDestPortBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.19 integer32 read-only
If the diffServIpAceDestPortOp is equal(2), this indicates the bitmask of the diffServIpAceMinDestPort. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
                                               diffServIpAceControlCode 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.20 integer32 read-only
Indicates how the control flags of TCP packets are to be compared. diffServIpAceControlCode is AND-ed with diffServIpAceControlCodeBitmask. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
                                               diffServIpAceControlCodeBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.21 integer32 read-only
Indicates how the control flags of TCP packets are to be compared. It can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
                                               diffServIpAceStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.17.1.22 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has the value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has the value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has the value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB.
                                     diffServMacAceTable 1.3.6.1.4.1.259.8.1.11.1.16.4.18 no-access
Table for MAC ACE.
                                           diffServMacAceEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1 no-access
Entry for MAC ACE.
                                               diffServMacAceIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.1 integer32 no-access
An index that uniquely identifies an entry in the MAC ACE table.
                                               diffServMacAceAccess 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.2 integer read-only
Indicates the action to be taken if a packet matches this ACE. Enumeration: 'deny': 2, 'permit': 1.
                                               diffServMacAcePktformat 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.3 integer read-only
Used to check the packet format of the packets. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1). Enumeration: 'untagged802Dot3': 3, 'tagggedEth2': 4, 'any': 1, 'untagged-Eth2': 2, 'tagged802Dot3': 5.
                                               diffServMacAceSourceMacAddr 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.4 macaddress read-only
Indicates the 48-bit source MAC address. The specified source MAC of the packet. The packet's source MAC address is AND-ed with the value of diffServMacAceSourceMacAddrBitmask and then compared against the value of this object.
                                               diffServMacAceSourceMacAddrBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.5 macaddress read-only
The specified source MAC address mask.
                                               diffServMacAceDestMacAddr 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.6 macaddress read-only
Indicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND-ed with the value of diffServMacAceDestMacAddrBitmask and then compared against the value of this object.
                                               diffServMacAceDestMacAddrBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.7 macaddress read-only
The specified destination MAC address mask.
                                               diffServMacAceVidOp 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.8 integer read-only
Indicates how a packet's VID is to be compared. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1). Enumeration: 'range': 3, 'equal': 2, 'noOperator': 1.
                                               diffServMacAceMinVid 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.9 integer32 read-only
Indicates the lower bound of the VID value range if the diffServMacAceVidOp is range(3).
                                               diffServMacAceVidBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.10 integer32 read-only
The bit mask of the VID. The default value is 0.
                                               diffServMacAceEtherTypeOp 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.12 integer read-only
Indicates how a packet's ether type is to be compared. Enumeration: 'range': 3, 'equal': 2, 'noOperator': 1.
                                               diffServMacAceEtherTypeBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.13 integer32 read-only
The bit mask of Ether type. The default value is 0.
                                               diffServMacAceMinEtherType 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.14 integer32 read-only
Indicates the lower bound of the ether type value range if the diffServMacAceEtherTypeOp is range(3).
                                               diffServMacAceStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.16 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has the value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has the value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has the value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB.
                                               diffServMacAceCosOp 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.17 integer read-only
Indicates how a packet's CoS is compared. If the object type of diffServMacAceCosOp is equal(2), diffServMacAceMinCos indicates the CoS value for comparing, and diffServMacAceCosBitmask is used as the bitmask of the CoS value. If the object type of diffServMacAceCosOp is range(3), diffServMacAceMinCos should be used as the lower bound of the CoS value. Enumeration: 'range': 3, 'equal': 2, 'noOperator': 1.
                                               diffServMacAceCosBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.18 integer read-only
Indicates the bitmask of the CoS value if the object type of diffServMacAceCosOp is equal(2). The default value is 0.
                                               diffServMacAceMinCos 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.19 integer read-only
If the object type of diffServMacAceCosOp is equal(2), diffServMacAceMinCos indicates the CoS value for comparing. If the object type of diffServMacAceCosOp is range(3), diffServMacAceMinCos indicates the lower bound of the CoS value.
                                               diffServMacAceSourceIpAddr 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.32 ipaddress read-only
If the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '0800'h, this specified source IP address. The packet's source address is AND-ed with the value of diffServMacAceSourceIpAddrBitmask and then compared against the value of this object.
                                               diffServMacAceSourceIpAddrBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.33 ipaddress read-only
If the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '0800'h, this specified source IP address mask. The packet's source address is AND-ed with the value of diffServMacAceSourceIpAddr and then compared against the value of this object.
                                               diffServMacAceDestIpAddr 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.34 ipaddress read-only
If the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '0800'h, this specified destination IP address. The packet's destination address is AND-ed with the value of diffServMacAceDestIpAddrBitmask and then compared against the value of this object.
                                               diffServMacAceDestIpAddrBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.35 ipaddress read-only
If the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '0800'h, this specified destination IP address mask. The packet's source address is AND-ed with the value of diffServMacAceDestIpAddr and then compared against the value of this object.
                                               diffServMacAceSourceIpv6Addr 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.36 octet string read-only
If the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '86DD'h, this specifies the source IPv6 address.
                                               diffServMacAceSourceIpv6AddrPrefixLen 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.37 integer32 read-only
If the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '86DD'h, this specifies the length (in bits) associated with the source IPv6 address prefix of this entry.
                                               diffServMacAceDestIpv6Addr 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.38 octet string read-only
If the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '86DD'h, this specifies the destination IPv6 address. This object may not be modified if the associated aclIpv6AceType object is equal to standard(1).
                                               diffServMacAceDestIpv6AddrPrefixLen 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.39 integer32 read-only
If the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '86DD'h, this specifies the length (in bits) associated with the destination IPv6 address prefix of this entry.
                                               diffServMacAceIpProtocol 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.40 integer32 read-only
The protocol number field in the IP header (or the next header field in the IPv6 header) used to indicate the higher layer protocol as specified in RFC 1700. A value of 0 matches every IP packet. The object=256 means 'any'. For example: 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation, 6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH, 88 is IGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP, 103 is PIMv2, 108 is PCP. This object may not be modified if the associated diffServMacAceMinEtherType object is not equal to '0800'h or '86DD'h.
                                               diffServMacAceL4SourcePortOp 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.41 integer read-only
Indicates how a packet's L4 source port is compared. Enumeration: 'range': 3, 'equal': 2, 'noOperator': 1.
                                               diffServMacAceL4SourcePort 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.42 integer32 read-only
If the object type of diffServMacAceL4SourcePortOp is equal(2), this indicates the l4 source port value for comparing.
                                               diffServMacAceL4SourcePortBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.43 integer32 read-only
If the object type of diffServMacAceL4SourcePortOp is equal(2), this indicates the bitmask for diffServMacAceL4SourcePort
                                               diffServMacAceL4DestPortOp 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.44 integer read-only
Indicates how a packet's L4 destination port is compared. Enumeration: 'range': 3, 'equal': 2, 'noOperator': 1.
                                               diffServMacAceL4DestPort 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.45 integer32 read-only
If the object type of diffServMacAceL4DestPortOp is equal(2), this indicates the l4 destination port value for comparing.
                                               diffServMacAceL4DestPortBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.18.1.46 integer32 read-only
If the object type of diffServMacAceL4SourcePortOp is equal(2), this indicates the bitmask for diffServMacAceL4DestPort
                                     diffServActionTable 1.3.6.1.4.1.259.8.1.11.1.16.4.19 no-access
Table for action.
                                           diffServActionEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1 no-access
Entry for action.
                                               diffServActionIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1.1 integer32 no-access
An index that uniquely identifies an entry in the action table.
                                               diffServActionList 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1.2 bits read-only
The bitmap value used to identify which action capabilities are enabled on the entry. The actionPktNewPri and actionPktNewDscp can not be enabled at the same time on the entry. The actionRedPktNewDscp and actionRedDrop can not be enabled at the same time on the entry. Bits: 'actionYellowPktNewDscp': 4, 'actionPktNewPri': 0, 'actionRedPktNewDscp': 6, 'actionPktNewIpPrec': 10, 'actionPktNewPhb': 9, 'actionPktNewDscp': 11, 'actionRedPktDrop': 7, 'reserved8': 8, 'actionGreenPktTransmit': 3, 'actionGreenPktNewDscp': 2, 'actionYellowPktDrop': 5, 'reserved1': 1.
                                               diffServActionPktNewPri 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1.3 integer32 read-only
Specifies the new priority value for the packet when the action is satisfied. If the actionPktNewPri bit of the diffServActionList is not enabled, this object can not be set.
                                               diffServActionPktNewPhb 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1.4 integer32 read-only
Specifies the inner priority value for the packet when the action is satisfied. If the actionPktNewPhb bit of the diffServActionList is not enabled, this object can not be set.
                                               diffServActionGreenPktTransmit 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1.5 enabledstatus read-only
The actionGreenPktTransmit bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the green marking packet will be Transmitted.
                                               diffServActionGreenPktNewDscp 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1.6 integer32 read-only
Specifies the new DSCP value for the packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionGreenPktNewDscp object is 64. If the actionGreenPktNewDscp bit of the diffServActionList is not enabled, this object can not be set.
                                               diffServActionYellowPktNewDscp 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1.7 integer32 read-only
Specifies the new DSCP value for the packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionYellowPktNewDscp object is 64. If the actionYellowPktNewDscp bit of the diffServActionList is not enabled, this object can not be set.
                                               diffServActionYellowPktDrop 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1.8 enabledstatus read-only
The actionYellowPktDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dropped.
                                               diffServActionRedPktNewDscp 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1.9 integer32 read-only
Specifies the new DSCP value for the red marking packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionRedPktNewDscp object is 64. If the actionRedPktNewDscp bit of the diffServActionList is not enabled, this object can not be set.
                                               diffServActionRedPktDrop 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1.10 enabledstatus read-only
The actionRedPktDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dropped.
                                               diffServActionStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1.11 rowstatus read-only
This object is used to create a new row, modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has the value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has the value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has the value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB.
                                               diffServActionPktNewIpPrec 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1.12 integer32 read-only
Specifies the new precedence value for the packet when the action is satisfied. If the actionPktNewIpPrec bit of the diffServActionList is not enabled, this object can not be set.
                                               diffServActionPktNewDscp 1.3.6.1.4.1.259.8.1.11.1.16.4.19.1.13 integer32 read-only
Specifies the new DSCP value for the packet when the action is satisfied. If the actionPktNewDscp bit of the diffServActionList is not enabled, this object can not be set.
                                     diffServMeterTable 1.3.6.1.4.1.259.8.1.11.1.16.4.20 no-access
Table for meter.
                                           diffServMeterEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.20.1 no-access
Entry for meter.
                                               diffServMeterIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.20.1.1 integer32 no-access
An entry that describes a single set of token bucket parameters.
                                               diffServMeterModel 1.3.6.1.4.1.259.8.1.11.1.16.4.20.1.2 integer read-only
The Metering algorithm associated with the Token Bucket parameters. The zeroDotZero indicates this is unknown. Enumeration: 'trTcmColorBlind': 2, 'default': 0, 'flow': 1, 'srTcmColorBlind': 6, 'srTcmColorAware': 7, 'trTcmColorAware': 3.
                                               diffServMeterRate 1.3.6.1.4.1.259.8.1.11.1.16.4.20.1.3 integer32 read-only
The token-bucket rate, in kilobits per second (kbps).
                                               diffServMeterBurstSize 1.3.6.1.4.1.259.8.1.11.1.16.4.20.1.4 integer32 read-only
The maximum number of bytes in a single transmission burst.
                                               diffServMeterStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.20.1.6 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has the value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has the value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has the value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB.
                                               diffServMeterPeakRate 1.3.6.1.4.1.259.8.1.11.1.16.4.20.1.7 integer32 read-only
The token-bucket rate, in kilobits per second (kbps).
                                               diffServMeterPeakBurstSize 1.3.6.1.4.1.259.8.1.11.1.16.4.20.1.8 integer32 read-only
The maximum number of bytes in a double transmission burst.
                                     diffServIpv6AceTable 1.3.6.1.4.1.259.8.1.11.1.16.4.21 no-access
Table for IPv6 ACE.
                                           diffServIpv6AceEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.21.1 no-access
Entry fo IPv6 ACE.
                                               diffServIpv6AceIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.21.1.1 integer32 no-access
An index that uniquely identifies an entry in the IPv6 table.
                                               diffServIpv6AceType 1.3.6.1.4.1.259.8.1.11.1.16.4.21.1.2 integer read-only
The specified IP v6 ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the diffServAclEntry and the not supporting field of this entry will be set 0. Enumeration: 'extended': 2, 'standard': 1.
                                               diffServIpv6AceAccess 1.3.6.1.4.1.259.8.1.11.1.16.4.21.1.3 integer read-only
Indicates the action to be taken if a packet matches this ACE. Enumeration: 'deny': 2, 'permit': 1.
                                               diffServIpv6AceSourceIpAddr 1.3.6.1.4.1.259.8.1.11.1.16.4.21.1.4 octet string read-only
Specifies the source IPv6 address.
                                               diffServIpv6AceSourceIpAddrPrefixLen 1.3.6.1.4.1.259.8.1.11.1.16.4.21.1.5 integer32 read-only
The length (in bits) associated with the source IPv6 address prefix of this entry.
                                               diffServIpv6AceDestIpAddr 1.3.6.1.4.1.259.8.1.11.1.16.4.21.1.6 octet string read-only
Specifies the destination IPv6 address. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1).
                                               diffServIpv6AceDestIpAddrPrefixLen 1.3.6.1.4.1.259.8.1.11.1.16.4.21.1.7 integer32 read-only
The length (in bits) associated with the destination IPv6 address prefix of this entry. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1).
                                               diffServIpv6AceDscp 1.3.6.1.4.1.259.8.1.11.1.16.4.21.1.9 integer32 read-only
Specifies the DSCP value to match against. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1).
                                               diffServIpv6AceStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.21.1.11 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has the value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has the value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has the value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB.
                                     diffServArpAceTable 1.3.6.1.4.1.259.8.1.11.1.16.4.23 no-access
The conceptual table of all of diffServArpAceEntry.
                                           diffServArpAceEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1 no-access
The conceptual row for diffServArpAceTable.
                                               diffServArpAceIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1.1 integer32 no-access
The unique index of an ACE within an ACL.
                                               diffServArpAceAction 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1.2 integer read-only
Indicates the action to be taken if a packet matches this ACE. This object cannot not be configured when the status of the entry, diffServArpAceStatus, is active(1). Enumeration: 'deny': 2, 'permit': 1.
                                               diffServArpAcePktType 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1.3 integer read-only
Indicates the packet type to be taken if a packet matches this ACE. This object can not be configured when the status of the entry, diffServArpAceStatus, is active(1). Enumeration: 'both': 3, 'request': 1, 'response': 2.
                                               diffServArpAceSourceIpAddr 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1.4 ipaddress read-only
The specified source ARP address. The packet's source address is AND'ed with the value of diffServArpAceSourceIpAddrBitmask and then compared against the value of this object. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1).
                                               diffServArpAceSourceIpAddrBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1.5 ipaddress read-only
The specified source ARP address mask. The packet's destination address is AND'ed with the value of diffServArpAceSourceIpAddr and then compared against the value of this object.
                                               diffServArpAceDestIpAddr 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1.6 ipaddress read-only
The specified destination IP address. The packet's destination address is AND'ed with the value of diffServArpAceDestIpAddrBitmask and then compared against the value of this object.
                                               diffServArpAceDestIpAddrBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1.7 ipaddress read-only
The specified destination IP address mask.
                                               diffServArpAceSourceMacAddr 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1.8 octet string read-only
Indicates the 48-bit destination MAC address. The specified source MAC of the packet. The packet's source MAC address is AND'ed with the value of aceArpSourceMacAddrBitmask and then compared against the value of this object. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1).
                                               diffServArpAceSourceMacAddrBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1.9 octet string read-only
The specified source MAC address mask. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1).
                                               diffServArpAceDestMacAddr 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1.10 octet string read-only
Indicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND'ed with the value of aceArpDestMacAddrBitmask and then compared against the value of this object. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1).
                                               diffServArpAceDestMacAddrBitmask 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1.11 octet string read-only
The specified destination MAC address mask. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1).
                                               diffServArpAceLogStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1.12 enabledstatus read-only
Indicates whether to log messages against the packets. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1).
                                               diffServArpAceStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.23.1.13 rowstatus read-only
The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB.
                                     diffServArpTable 1.3.6.1.4.1.259.8.1.11.1.16.4.24 no-access
The conceptual table of all of diffServArpEntry.
                                           diffServArpEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.24.1 no-access
The conceptual row for diffServArpTable.
                                               diffServArpAclName 1.3.6.1.4.1.259.8.1.11.1.16.4.24.1.1 displaystring read-only
The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device.
                                     diffServAclHwCounterTable 1.3.6.1.4.1.259.8.1.11.1.16.4.26 no-access
Table for differentiated services hardware counter on each port.
                                           diffServAclHwCounterEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.26.1 no-access
Entry for differentiated services hardware counter on each port.
                                               diffServAclHwCounterIfIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.26.1.1 interfaceindex read-only
This object is the interface index of diffServPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                               diffServAclHwCounterDirection 1.3.6.1.4.1.259.8.1.11.1.16.4.26.1.2 integer read-only
Indicates a particular direction of traffic. Enumeration: 'ingress': 1, 'egress': 2.
                                               diffServAclHwCounterAclIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.26.1.3 integer32 read-only
An index that uniquely identifies an entry in the ACL table.
                                               diffServAclHwCounterAceIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.26.1.4 integer32 read-only
An index that uniquely identifies an entry of an ACL. This entry might be a compressed ACE (which index is bigger than SYS_ADPT_MAX_NBRS_OF_ACE_OF_SYSTEM) with multiple user configured ACEs, and the index of compressed ACE will not show in ACE table.
                                               diffServAclHwCounterAceHitCount 1.3.6.1.4.1.259.8.1.11.1.16.4.26.1.5 unsigned32 read-only
Specifies the hardware counter of an ACE entry.
                                     diffServPolicyMapPortTable 1.3.6.1.4.1.259.8.1.11.1.16.4.27 no-access
Table for policy map of each port.
                                           diffServPolicyMapPortEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.27.1 no-access
Entry for diffServPolicyMapPortTable.
                                               diffServPolicyMapPortIfIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.27.1.1 interfaceindex no-access
This object is the interface index of DiffServPolicyMapPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                               diffServPolicyMapPortDirection 1.3.6.1.4.1.259.8.1.11.1.16.4.27.1.2 integer no-access
Indicates this policy map effect to which direction of traffic. Enumeration: 'ingress': 1, 'egress': 2.
                                               diffServPolicyMapPortPolicyMapIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.27.1.3 integer32 read-write
Specifies the policy map index binded to the interface. The policy map identified by a particular value of this index is associated with the same DiffServPolicyMapEntry as identified by the same value of diffServPolicyMapIndex.
                                               diffServPolicyMapPortStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.27.1.4 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table.The status column has six defined values: The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB.
                                     diffServAccessGroupTable 1.3.6.1.4.1.259.8.1.11.1.16.4.28 no-access
Table for specifies access group for ACL on each port.
                                           diffServAccessGroupEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.28.1 no-access
Entry for diffServAccessGroupTable.
                                               diffServAccessGroupIfIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.28.1.1 interfaceindex no-access
This object is the interface index of diffServAccessGroupEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. If support global ACL, using the specific ifindex(65535).
                                               diffServAccessGroupDirection 1.3.6.1.4.1.259.8.1.11.1.16.4.28.1.2 integer no-access
Indicates this access group effect to which direction of traffic. Enumeration: 'ingress': 1, 'egress': 2.
                                               diffServAccessGroupType 1.3.6.1.4.1.259.8.1.11.1.16.4.28.1.3 integer no-access
Specifies the access group type, only support bind one ACL on a port. Enumeration: 'ip': 2, 'mac': 1, 'ipv6': 3.
                                               diffServAccessGroupAclIndex 1.3.6.1.4.1.259.8.1.11.1.16.4.28.1.4 integer32 read-write
Specifies the ACL index apply to this access group. The index uniquely identifies an entry in diffServAclTable.
                                               diffServAccessGroupTimeRangeName 1.3.6.1.4.1.259.8.1.11.1.16.4.28.1.5 displaystring read-write
The name of the time range entry bound to the access group. This object should be equal to one of the timeRangeName objects in timeRangeTable.
                                               diffServAccessGroupCounterStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.28.1.6 enabledstatus read-write
The acl counter enable status of this access group.
                                               diffServAccessGroupStatus 1.3.6.1.4.1.259.8.1.11.1.16.4.28.1.7 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table.The status column has six defined values: The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB.
                                     diffServTcamTable 1.3.6.1.4.1.259.8.1.11.1.16.4.29 no-access
The conceptual table of all of DiffServTcamEntry.
                                           diffServTcamEntry 1.3.6.1.4.1.259.8.1.11.1.16.4.29.1 no-access
The conceptual row for diffServTcamTable.
                                               diffServTcamUnit 1.3.6.1.4.1.259.8.1.11.1.16.4.29.1.1 integer32 no-access
This object identifies the switch within the system for which this entry contains information.
                                               diffServTcamDevice 1.3.6.1.4.1.259.8.1.11.1.16.4.29.1.2 integer32 no-access
The device id of the specified unit.
                                               diffServTcamPool 1.3.6.1.4.1.259.8.1.11.1.16.4.29.1.3 integer32 no-access
The TCAM pool index of the specified unit and device.
                                               diffServTcamPoolCapability 1.3.6.1.4.1.259.8.1.11.1.16.4.29.1.4 bits read-only
The bitmap value used to identify which functions supported on this pool. Bits: 'reserved': 22, 'ipv6StdAcl': 2, 'ipv6ExtDiffServ': 7, 'egressIpDiffServ': 13, 'ipv6StdDiffServ': 6, 'ipSourceGuard': 17, 'cpuInterface': 19, 'ipAcl': 1, 'egressMacAcl': 8, 'ipDiffServ': 5, 'egressIpv6StdDiffServ': 14, 'macAcl': 0, 'linkLocal': 21, 'egressMacDiffServ': 12, 'ipv6ExtAcl': 3, 'egressIpv6ExtAcl': 11, 'egressIpv6StdAcl': 10, 'egressIpv6ExtDiffServ': 15, 'ipv6SourceGuard': 18, 'macDiffServ': 4, 'rateLimit': 20, 'webAuth': 16, 'egressIpAcl': 9.
                                               diffServTcamTotal 1.3.6.1.4.1.259.8.1.11.1.16.4.29.1.5 integer32 read-only
The total number of TCAM pool entry.
                                               diffServTcamFree 1.3.6.1.4.1.259.8.1.11.1.16.4.29.1.6 integer32 read-only
The free number of TCAM pool entry.
                                               diffServTcamUsed 1.3.6.1.4.1.259.8.1.11.1.16.4.29.1.7 integer32 read-only
The used number of TCAM pool entry.
                                 cosGlobalMgt 1.3.6.1.4.1.259.8.1.11.1.16.6
                                     prioGlobalCosToDscpTable 1.3.6.1.4.1.259.8.1.11.1.16.6.4 no-access
Table for CoS/CFI to internal QoS label mapping.
                                         prioGlobalCosToDscpEntry 1.3.6.1.4.1.259.8.1.11.1.16.6.4.1 no-access
Entry for CoS/CFI to internal QoS label mapping.
                                             prioGlobalCosToDscpCosValue 1.3.6.1.4.1.259.8.1.11.1.16.6.4.1.1 integer32 no-access
The CoS value (0 to 7) mapped to an internal QoS label value which is composed of PHB (3 bits) and drop precedence (2 bits).
                                             prioGlobalCosToDscpCFIValue 1.3.6.1.4.1.259.8.1.11.1.16.6.4.1.2 integer32 no-access
The CFI value (0 or 1) mapped to an internal QoS label value which is composed of PHB (3 bits) and drop precedence (2 bits).
                                             prioGlobalCosToDscpPhbValue 1.3.6.1.4.1.259.8.1.11.1.16.6.4.1.4 integer32 read-write
The PHB value of internal QoS label.
                                             prioGlobalCosToDscpColorValue 1.3.6.1.4.1.259.8.1.11.1.16.6.4.1.5 integer read-write
The drop precedence value of internal QoS label. Green(0), Yellow(3), Red(1). Enumeration: 'green': 0, 'red': 1, 'yellow': 3.
                                     prioGlobalDscpToDscpTable 1.3.6.1.4.1.259.8.1.11.1.16.6.6 no-access
Table for DSCP to internal QoS label mapping. This table setting will take effect only when the interface Qos mapping classification mode is set to DSCP mode.
                                         prioGlobalDscpToDscpEntry 1.3.6.1.4.1.259.8.1.11.1.16.6.6.1 no-access
Entry for ingress DSCP to internal QoS label mapping.
                                             prioGlobalDscpToDscpIngressDscpValue 1.3.6.1.4.1.259.8.1.11.1.16.6.6.1.1 integer32 no-access
The ingress DSCP value which will be mapped to internal QoS label value.
                                             prioGlobalDscpToDscpPhbValue 1.3.6.1.4.1.259.8.1.11.1.16.6.6.1.3 integer32 read-write
The PHB value of internal QoS label.
                                             prioGlobalDscpToDscpColorValue 1.3.6.1.4.1.259.8.1.11.1.16.6.6.1.4 integer read-write
The drop precedence value of internal QoS label. Green(0), Yellow(3), Red(1). Enumeration: 'green': 0, 'red': 1, 'yellow': 3.
                                     prioGlobalDscpToQueueTable 1.3.6.1.4.1.259.8.1.11.1.16.6.10 no-access
Table for PHB to queue mapping.
                                           prioGlobalDscpToQueueEntry 1.3.6.1.4.1.259.8.1.11.1.16.6.10.1 no-access
Entry for PHB to queue mapping.
                                               prioGlobalDscpToQueuePHBValue 1.3.6.1.4.1.259.8.1.11.1.16.6.10.1.1 integer32 no-access
The PHB value of internal QoS label.
                                               prioGlobalDscpToQueueQueueValue 1.3.6.1.4.1.259.8.1.11.1.16.6.10.1.2 integer32 read-write
The queue value which is mapped from the PHB value of QoS label.
                           securityMgt 1.3.6.1.4.1.259.8.1.11.1.17
                                 privateVlanMgt 1.3.6.1.4.1.259.8.1.11.1.17.1
                                     privateVlanStatus 1.3.6.1.4.1.259.8.1.11.1.17.1.1 enabledstatus read-write
This controls whether private VLAN is enabled.
                                     privateVlanUplinkPorts 1.3.6.1.4.1.259.8.1.11.1.17.1.2 portlist read-write
This is the list of uplink ports for private VLAN. They should not overlap with privateVlanDownlinkPorts. 0 will be displayed if the privateVlanStatus is disabled. You must enable the privateVlanStatus before setting this variable.
                                     privateVlanDownlinkPorts 1.3.6.1.4.1.259.8.1.11.1.17.1.3 portlist read-write
This is the list of downlink ports for private VLAN. They should not overlap with privateVlanUplinkPorts. Multiple port setting is permitted. 0 will be displayed if the privateVlanStatus is disabled. You must enable the privateVlanStatus before setting this variable.
                                     privateVlanVlanTable 1.3.6.1.4.1.259.8.1.11.1.17.1.4 no-access
A table containing private VLAN information on the VLANs which currently exist.
                                         privateVlanVlanEntry 1.3.6.1.4.1.259.8.1.11.1.17.1.4.1 no-access
A conceptual row containing the private VLAN information on the VLANs for a particular management domain.
                                             privateVlanVlanIndex 1.3.6.1.4.1.259.8.1.11.1.17.1.4.1.1 integer32 no-access
The VLAN ID of this private VLAN.
                                             privateVlanVlanType 1.3.6.1.4.1.259.8.1.11.1.17.1.4.1.2 integer read-only
The VLAN type as defined for Private VLAN feature. Set the value to invalid(1) to destroy an entry. Set other values to create an entry. If an index already exists, set others to modifiy it. Note that a VLAN's private VLAN type cannot be changed once it has any port members. Enumeration: 'isolated': 3, 'primary': 2, 'community': 4, 'invalid': 1.
                                             privateVlanAssoicatedPrimaryVlan 1.3.6.1.4.1.259.8.1.11.1.17.1.4.1.3 integer32 read-only
The VLAN ID of the associated primary VLAN used for the private VLAN feature if privateVlanVlanType has the value of isolated(3), community(4). If privateVlanVlanType has the value of primary(2), then this object has the value of 0. Note that one isolated VLAN can only be associated with one unique primary VLAN. One primary VLAN can only be associated with one isolated VLAN. One primary VLAN can be associated with multiple community VLANs; one community VLAN can only be associated with one unique primary VLAN.
                                     privateVlanPrivatePortTable 1.3.6.1.4.1.259.8.1.11.1.17.1.5 no-access
A table containing information on the configuration of secondary VLANs on the device ports.
                                         privateVlanPrivatePortEntry 1.3.6.1.4.1.259.8.1.11.1.17.1.5.1 no-access
A conceptual row containing information of the configuration of secondary VLANs for each port. An entry is created by the managed system for each interface which can be configured as a private port for Private VLAN feature.
                                             privateVlanPrivatePortIfIndex 1.3.6.1.4.1.259.8.1.11.1.17.1.5.1.1 interfaceindex no-access
This is defined as the ifIndex.
                                             privateVlanPrivatePortSecondaryVlan 1.3.6.1.4.1.259.8.1.11.1.17.1.5.1.2 integer32 read-write
The VLAN ID of the secondary VLAN configured on this private port. A private port is a port that allows ingress traffic of the secondary VLAN as well as egress traffic of its associated primary VLAN, but blocks the egress traffic of the isolated VLAN while allowing the egress traffic of the community or twoWayCommunity VLAN depending on the type of the secondary VLAN. Note that a port can join a secondary VLAN only after this secondary VLAN has been associated with a primary VLAN, i.e., the cpvlanVlanAssociatedPrimaryVlan has a non-zero value. The default value of 0 for this object means this port has not yet joined a secondary VLAN.
                                     privateVlanPromPortTable 1.3.6.1.4.1.259.8.1.11.1.17.1.6 no-access
A table containing secondary VLAN to primary VLAN remapping information on ports of the device.
                                         privateVlanPromPortEntry 1.3.6.1.4.1.259.8.1.11.1.17.1.6.1 no-access
A conceptual row containing secondary VLAN to primary VLAN remapping information for each port. An entry is created by the managed system for each interface which can be configured as a promiscuous port for the private VLAN feature.
                                             privateVlanPromPortIfIndex 1.3.6.1.4.1.259.8.1.11.1.17.1.6.1.1 interfaceindex no-access
This is defined as ifIndex.
                                             privateVlanPromPortPrimaryVlanId 1.3.6.1.4.1.259.8.1.11.1.17.1.6.1.2 integer32 read-write
The primary VLAN ID of the promiscous port.
                                             privateVlanPromPortSecondaryRemap 1.3.6.1.4.1.259.8.1.11.1.17.1.6.1.3 octet string read-only
A string of octets containing one bit per VLAN in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet. Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs.
                                             privateVlanPromPortSecondaryRemap2k 1.3.6.1.4.1.259.8.1.11.1.17.1.6.1.4 octet string read-only
A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 1024 through 2047 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet. Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. This object is only instantiated on devices which support the range of VlanIndexOrZero up to 4095.
                                             privateVlanPromPortSecondaryRemap3k 1.3.6.1.4.1.259.8.1.11.1.17.1.6.1.5 octet string read-only
A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 2048 through 3071 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet. Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. This object is only instantiated on devices which support the range of VlanIndexOrZero up to 4095.
                                             privateVlanPromPortSecondaryRemap4k 1.3.6.1.4.1.259.8.1.11.1.17.1.6.1.6 octet string read-only
A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 3072 through 4095 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet. Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. This object is only instantiated on devices which support the range of VlanIndexOrZero up to 4095.
                                     privateVlanSessionTable 1.3.6.1.4.1.259.8.1.11.1.17.1.8 no-access
Contains the settings for private VLAN Session.
                                         privateVlanSessionEntry 1.3.6.1.4.1.259.8.1.11.1.17.1.8.1 no-access
A conceptual row in the privateVlanSession table.
                                             privateVlanSessionId 1.3.6.1.4.1.259.8.1.11.1.17.1.8.1.1 integer no-access
The session ID that may specifiy certain entry in the table which contains private VLAN session information.
                                             privateVlanSessionUplinkPorts 1.3.6.1.4.1.259.8.1.11.1.17.1.8.1.2 portlist read-only
This is the list of uplink ports for a session of private VLAN. They should not overlap with the privateVlanSessionPortDownlink of the same session, and they also should not overlap with the privateVlanSessionPortUplink and the privateVlanSessionPortDownlink of other session.
                                             privateVlanSessionDownlinkPorts 1.3.6.1.4.1.259.8.1.11.1.17.1.8.1.3 portlist read-only
This is the list of downlink ports for a session of private VLAN. They should not overlap with the privateVlanSessionPortUplink of the same session, and they also should not overlap with the privateVlanSessionPortUplink and the privateVlanSessionPortDownlink of other session.
                                             privateVlanSessionStatus 1.3.6.1.4.1.259.8.1.11.1.17.1.8.1.4 validstatus read-only
Set this to valid(1) to create an entry. Sets this to invalid(2) to destroy an entry.
                                     privateVlanUplinkToUplink 1.3.6.1.4.1.259.8.1.11.1.17.1.9 integer read-write
Sets this to blocking(2) to deny the traffic of uplink ports between different sessions. Set this to forwarding(1) to allow the traffic of uplink ports between different sessions. Enumeration: 'forwarding': 2, 'blocking': 1.
                                 portSecurityMgt 1.3.6.1.4.1.259.8.1.11.1.17.2
                                     portSecPortTable 1.3.6.1.4.1.259.8.1.11.1.17.2.1 no-access
The port security(MAC binding) Table.
                                         portSecPortEntry 1.3.6.1.4.1.259.8.1.11.1.17.2.1.1 no-access
The entry of portSecPortTable.
                                             portSecPortIndex 1.3.6.1.4.1.259.8.1.11.1.17.2.1.1.1 interfaceindex no-access
The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                             portSecPortStatus 1.3.6.1.4.1.259.8.1.11.1.17.2.1.1.2 enabledstatus read-write
Set enabled(1) to enable port security and set disabled(2) to disable port security.
                                             portSecAction 1.3.6.1.4.1.259.8.1.11.1.17.2.1.1.3 integer read-write
The corresponding actions that will take place when a port is under intrusion, when this variable is set to none(1), no action will be performed, when this variable is set to trap(2), a swPortSecurityTrap trap will be sent, when this variable is set to shutdown(3), the port will shutdown, when this variable is set to trapAndShutdown(4), a swPortSecurityTrap will be sent and the port will shutdown. Enumeration: 'none': 1, 'trap': 2, 'shutdown': 3, 'trapAndShutdown': 4.
                                             portSecMaxMacCount 1.3.6.1.4.1.259.8.1.11.1.17.2.1.1.4 integer32 read-write
The maximun number of MAC addresses that will be learned and locked. When we change the value of this variable, if the portSecPortStatus is enabled, we will discard all secure MAC and begin to learn again, until the number of MAC has reached this value, and only the secure MAC addresses can enter this port. If the portSecPortStatus is disabled, we will begin to learn the MAC, and auto enabled the portSecPortStatus when the MAC has reached this value.
                                             portSecAutoSaveStatus 1.3.6.1.4.1.259.8.1.11.1.17.2.1.1.7 enabledstatus read-write
Set enabled(1) to enable the feature and set disabled(2) to disable the feature.
                                     portSecMacAsPermanentMgt 1.3.6.1.4.1.259.8.1.11.1.17.2.6
                                         portSecMacAsPermanentPortIndex 1.3.6.1.4.1.259.8.1.11.1.17.2.6.1 integer32 read-write
The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. Specifies the interface to convert the learnt secured MAC address into manual configured. '0' represents that no interface is specified.
                                         portSecMacAsPermanentAction 1.3.6.1.4.1.259.8.1.11.1.17.2.6.2 integer read-write
Set action(2) to convert the learnt secured MAC address into manual configured. When action finsh or no action, the value of this object is noAction(1). Enumeration: 'action': 2, 'noAction': 1.
                                 radiusMgt 1.3.6.1.4.1.259.8.1.11.1.17.4
                                     radiusServerGlobalAuthPort 1.3.6.1.4.1.259.8.1.11.1.17.4.1 integer32 read-write
Aauthentication port number for RADIUS server. When specified radius server do not set aauthentication port number, this value is used.
                                     radiusServerGlobalAcctPort 1.3.6.1.4.1.259.8.1.11.1.17.4.2 integer32 read-write
Accounting port number of RADIUS server. When specified radius server do not set accounting port number, this value is used.
                                     radiusServerGlobalKey 1.3.6.1.4.1.259.8.1.11.1.17.4.3 displaystring read-write
Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. When specified radius server do not set key, this this value is used.
                                     radiusServerGlobalRetransmit 1.3.6.1.4.1.259.8.1.11.1.17.4.4 integer read-write
Maximum number of retransmissions for RADIUS. When specified radius server do not set maximum number of retransmissions, this value is used.
                                     radiusServerGlobalTimeout 1.3.6.1.4.1.259.8.1.11.1.17.4.5 integer read-write
Timeout for RADIUS. When specified radius server do not set timeout, this value is used.
                                     radiusServerTable 1.3.6.1.4.1.259.8.1.11.1.17.4.7 no-access
The table for RADIUS server.
                                         radiusServerEntry 1.3.6.1.4.1.259.8.1.11.1.17.4.7.1 no-access
The conceptual row for radiusServerTable.
                                             radiusServerIndex 1.3.6.1.4.1.259.8.1.11.1.17.4.7.1.1 integer32 no-access
The RADIUS server index in the table.
                                             radiusServerAddress 1.3.6.1.4.1.259.8.1.11.1.17.4.7.1.2 ipaddress read-only
IP address of a RADIUS server.
                                             radiusServerAuthPortNumber 1.3.6.1.4.1.259.8.1.11.1.17.4.7.1.3 integer32 read-only
Authentication port number of RADIUS server.
                                             radiusServerAcctPortNumber 1.3.6.1.4.1.259.8.1.11.1.17.4.7.1.4 integer32 read-only
Accounting port number of RADIUS server.
                                             radiusServerKey 1.3.6.1.4.1.259.8.1.11.1.17.4.7.1.5 displaystring read-write
Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string.
                                             radiusServerRetransmit 1.3.6.1.4.1.259.8.1.11.1.17.4.7.1.6 integer32 read-write
Timeout for RADIUS.
                                             radiusServerTimeout 1.3.6.1.4.1.259.8.1.11.1.17.4.7.1.7 integer32 read-write
Timeout for RADIUS.
                                             radiusServerStatus 1.3.6.1.4.1.259.8.1.11.1.17.4.7.1.8 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                                 tacacsMgt 1.3.6.1.4.1.259.8.1.11.1.17.5
                                     tacacsPlusServerGlobalPortNumber 1.3.6.1.4.1.259.8.1.11.1.17.5.2 integer32 read-write
TCP port number of TACACS+ server. When specified TACACS+ server do not set TCP port number, this this value is used.
                                     tacacsPlusServerGlobalKey 1.3.6.1.4.1.259.8.1.11.1.17.5.3 displaystring read-write
The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When this variable is read, it always returns a zero-length string.When specified TACACS+ server do not set the encryption key , this this value is used.
                                     tacacsPlusServerTable 1.3.6.1.4.1.259.8.1.11.1.17.5.4 no-access
The table for TACACS+ server.
                                         tacacsPlusServerEntry 1.3.6.1.4.1.259.8.1.11.1.17.5.4.1 no-access
The conceptual row for tacacsPlusServerTable.
                                             tacacsPlusServerIndex 1.3.6.1.4.1.259.8.1.11.1.17.5.4.1.1 integer32 no-access
TACACS+ server index.
                                             tacacsPlusServerAddress 1.3.6.1.4.1.259.8.1.11.1.17.5.4.1.2 ipaddress read-only
IP address of a TACACS+ server.
                                             tacacsPlusServerPortNumber 1.3.6.1.4.1.259.8.1.11.1.17.5.4.1.3 integer32 read-only
TCP port number of a TACACS+ server.
                                             tacacsPlusServerKey 1.3.6.1.4.1.259.8.1.11.1.17.5.4.1.4 displaystring read-only
The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When this variable is read, it always returns a zero-length string.
                                             tacacsPlusServerStatus 1.3.6.1.4.1.259.8.1.11.1.17.5.4.1.8 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                                 sshMgt 1.3.6.1.4.1.259.8.1.11.1.17.6
                                     sshServerStatus 1.3.6.1.4.1.259.8.1.11.1.17.6.1 enabledstatus read-write
The status of Secure Shell Server. Set this value to enabled(1) to enable SSH server, set this value to disabled(2) to disable the SSH server.
                                     sshServerMajorVersion 1.3.6.1.4.1.259.8.1.11.1.17.6.2 integer32 read-only
The major version of the SSH Server.
                                     sshServerMinorVersion 1.3.6.1.4.1.259.8.1.11.1.17.6.3 integer32 read-only
The minor version of the SSH Server.
                                     sshTimeout 1.3.6.1.4.1.259.8.1.11.1.17.6.4 integer read-write
The time interval that the router waits for the SSH client to respond. The range is 1-120.
                                     sshAuthRetries 1.3.6.1.4.1.259.8.1.11.1.17.6.5 integer read-write
The number of attempts after which the interface is reset. The range is 1-5.
                                     sshConnInfoTable 1.3.6.1.4.1.259.8.1.11.1.17.6.6 no-access
The table for Secure Shell Connection.
                                         sshConnInfoEntry 1.3.6.1.4.1.259.8.1.11.1.17.6.6.1 no-access
The conceptual row for sshConnInfoTable.
                                             sshConnID 1.3.6.1.4.1.259.8.1.11.1.17.6.6.1.1 integer32 no-access
The connection ID of the Secure Shell Connection.
                                             sshConnMajorVersion 1.3.6.1.4.1.259.8.1.11.1.17.6.6.1.2 integer32 read-only
The SSH major version.
                                             sshConnMinorVersion 1.3.6.1.4.1.259.8.1.11.1.17.6.6.1.3 integer32 read-only
The SSH minor version.
                                             sshConnStatus 1.3.6.1.4.1.259.8.1.11.1.17.6.6.1.5 integer read-only
The SSH connection State. negotiationStart(1) means the SSH is in its negotiation start state, authenticationStart(2) means the SSH is in authentication start state, sessionStart(3) means the SSH is in session start State. Enumeration: 'negotiationStart': 1, 'authenticationStart': 2, 'sessionStart': 3.
                                             sshConnUserName 1.3.6.1.4.1.259.8.1.11.1.17.6.6.1.6 displaystring read-only
The user name of the connection.
                                             sshDisconnect 1.3.6.1.4.1.259.8.1.11.1.17.6.6.1.7 integer read-write
Set the variable to disconnect the connection, noDisconnect(1) will always be obtained when reading this variable. Enumeration: 'noDisconnect': 1, 'disconnect': 2.
                                             sshConnEncryptionTypeStr 1.3.6.1.4.1.259.8.1.11.1.17.6.6.1.8 displaystring read-only
The encryption type of the SSH.
                                     sshKeySize 1.3.6.1.4.1.259.8.1.11.1.17.6.7 integer read-write
The SSH server key size.
                                     sshRsaHostKey1 1.3.6.1.4.1.259.8.1.11.1.17.6.8 keysegment read-only
The RSA host key segment 1.
                                     sshRsaHostKey2 1.3.6.1.4.1.259.8.1.11.1.17.6.9 keysegment read-only
The RSA host key segment 2.
                                     sshRsaHostKey3 1.3.6.1.4.1.259.8.1.11.1.17.6.10 keysegment read-only
The RSA host key segment 3.
                                     sshRsaHostKey4 1.3.6.1.4.1.259.8.1.11.1.17.6.11 keysegment read-only
The RSA host key segment 4.
                                     sshRsaHostKey5 1.3.6.1.4.1.259.8.1.11.1.17.6.12 keysegment read-only
The RSA host key segment 5.
                                     sshRsaHostKey6 1.3.6.1.4.1.259.8.1.11.1.17.6.13 keysegment read-only
The RSA host key segment 6.
                                     sshRsaHostKey7 1.3.6.1.4.1.259.8.1.11.1.17.6.14 keysegment read-only
The RSA host key segment 7.
                                     sshRsaHostKey8 1.3.6.1.4.1.259.8.1.11.1.17.6.15 keysegment read-only
The RSA host key segment 8.
                                     sshDsaHostKey1 1.3.6.1.4.1.259.8.1.11.1.17.6.16 keysegment read-only
The DSA host key segment 1.
                                     sshDsaHostKey2 1.3.6.1.4.1.259.8.1.11.1.17.6.17 keysegment read-only
The DSA host key segment 2.
                                     sshDsaHostKey3 1.3.6.1.4.1.259.8.1.11.1.17.6.18 keysegment read-only
The DSA host key segment 3.
                                     sshDsaHostKey4 1.3.6.1.4.1.259.8.1.11.1.17.6.19 keysegment read-only
The DSA host key segment 4.
                                     sshDsaHostKey5 1.3.6.1.4.1.259.8.1.11.1.17.6.20 keysegment read-only
The DSA host key segment 5.
                                     sshDsaHostKey6 1.3.6.1.4.1.259.8.1.11.1.17.6.21 keysegment read-only
The DSA host key segment 6.
                                     sshDsaHostKey7 1.3.6.1.4.1.259.8.1.11.1.17.6.22 keysegment read-only
The DSA host key segment 7.
                                     sshDsaHostKey8 1.3.6.1.4.1.259.8.1.11.1.17.6.23 keysegment read-only
The DSA host key segment 8.
                                     sshHostKeyGenAction 1.3.6.1.4.1.259.8.1.11.1.17.6.24 integer read-write
This variable is for host key generating. For the set behavior: Set it to genRsaKey(2) to generate the RSA host key, and to genDsaKey(3) to generate the DSA host key, if genBothKeys(4) is set, both RSA and DSA host key are generated. For the get behavior: You will get genRsaKey(2), genDsaKey(3) or genBothKeys(4) when the key gen action is in progress. otherwise, you will get noGen(1). Enumeration: 'genBothKeys': 4, 'noGen': 1, 'genRsaKey': 2, 'genDsaKey': 3.
                                     sshHostKeyGenStatus 1.3.6.1.4.1.259.8.1.11.1.17.6.25 integer read-only
The result of the last KeyGen status. if no key gen action has been performed. you will get unknown(1) status. Enumeration: 'unknown': 1, 'success': 2, 'failure': 3.
                                     sshHostKeySaveAction 1.3.6.1.4.1.259.8.1.11.1.17.6.26 integer read-write
To save host key from memory to flash. For the set behavior: Set it to save(2) to perform the save operation. For the get behavior: You will get save(1) when the save action is in progress. Otherwise, you will get noSave(1). Enumeration: 'noSave': 1, 'save': 2.
                                     sshHostKeySaveStatus 1.3.6.1.4.1.259.8.1.11.1.17.6.27 integer read-only
The result of the last savekey status. If no save action has been performed, you will get unknown(1) status. Enumeration: 'unknown': 1, 'success': 2, 'failure': 3.
                                     sshHostKeyDelAction 1.3.6.1.4.1.259.8.1.11.1.17.6.28 integer read-write
To delete the host key. For the set behavior: Set it to delRsaKey(2) to delete the RSA host key, to delDsaKey(3) to delete the DSA host key, or to delBothKeys(4) to delete both RSA and DSA host key. For the get behavior: You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4) when the delete operation is in progress. Otherwise, you will get noDel(1). Enumeration: 'delRsaKey': 2, 'delDsaKey': 3, 'noDel': 1, 'delBothKeys': 4.
                                     sshUserTable 1.3.6.1.4.1.259.8.1.11.1.17.6.29 no-access
The conceptual table of all of sshUserEntry.
                                           sshUserEntry 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1 no-access
The conceptual row for sshUserTable.
                                               sshUserName 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.1 displaystring no-access
User Name.
                                               sshUserRsaKey1 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.2 keysegment read-only
The RSA user key segment 1.
                                               sshUserRsaKey2 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.3 keysegment read-only
The RSA user key segment 2.
                                               sshUserRsaKey3 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.4 keysegment read-only
The RSA user key segment 3.
                                               sshUserRsaKey4 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.5 keysegment read-only
The RSA user key segment 4.
                                               sshUserRsaKey5 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.6 keysegment read-only
The RSA user key segment 5.
                                               sshUserRsaKey6 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.7 keysegment read-only
The RSA user key segment 6.
                                               sshUserRsaKey7 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.8 keysegment read-only
The RSA user key segment 7.
                                               sshUserRsaKey8 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.9 keysegment read-only
The RSA user key segment 8.
                                               sshUserDsaKey1 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.10 keysegment read-only
The DSA user key segment 1.
                                               sshUserDsaKey2 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.11 keysegment read-only
The DSA user key segment 2.
                                               sshUserDsaKey3 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.12 keysegment read-only
The DSA user key segment 3.
                                               sshUserDsaKey4 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.13 keysegment read-only
The DSA user key segment 4.
                                               sshUserDsaKey5 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.14 keysegment read-only
The DSA user key segment 5.
                                               sshUserDsaKey6 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.15 keysegment read-only
The DSA user key segment 6.
                                               sshUserDsaKey7 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.16 keysegment read-only
The DSA user key segment 7.
                                               sshUserDsaKey8 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.17 keysegment read-only
The DSA user key segment 8.
                                               sshUserKeyDelAction 1.3.6.1.4.1.259.8.1.11.1.17.6.29.1.18 integer read-write
To delete the user key. For the set behavior: Set it to delRsaKey(2) to delete the RSA user key, to delDsaKey(3) to delete the DSA user key, or to delBothKeys(4) to delete both RSA and DSA user key. For the get behavior: You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4) when the delete operation is in progress. Otherwise, you will get noDel(1). Enumeration: 'delRsaKey': 2, 'delDsaKey': 3, 'noDel': 1, 'delBothKeys': 4.
                                     sshRsaHostKeySHA1FingerPrint 1.3.6.1.4.1.259.8.1.11.1.17.6.30 displaystring read-only
The SHA1 finger print of the RSA host key.
                                     sshRsaHostKeyMD5FingerPrint 1.3.6.1.4.1.259.8.1.11.1.17.6.31 displaystring read-only
The MD5 finger print of RSA host key.
                                     sshDsaHostKeySHA1FingerPrint 1.3.6.1.4.1.259.8.1.11.1.17.6.32 displaystring read-only
The SHA1 finger print of the DSA host key.
                                     sshDsaHostKeyMD5FingerPrint 1.3.6.1.4.1.259.8.1.11.1.17.6.33 displaystring read-only
The MD5 finger print of the DSA host key.
                                 aclMgt 1.3.6.1.4.1.259.8.1.11.1.17.7
                                     aclAttachCtlMgt 1.3.6.1.4.1.259.8.1.11.1.17.7.13
                                           aclAttachCtlIndex 1.3.6.1.4.1.259.8.1.11.1.17.7.13.1 integer32 read-write
Index for attachment control. Specifies the ACL as the target to relate with the IP ACE, the MAC ACE or IPv6 ACE. The ACL identified by a particular value of this index is associated with the same aclEntry as identified by the same value of aclIndex.
                                           aclAttachCtlAceType 1.3.6.1.4.1.259.8.1.11.1.17.7.13.2 integer read-write
Type for attachment control. Specifies the type of aclAttachCtlAceIndex to relate with the aclAttachCtlIndex. When the type is macAce(1), the index of aclAceIndexList is the aclMacAceEntry. When the type is ipAce(2), the index of aclAceIndexList is the aclIpAceEntry. When the type is ipv6Ace(3), the index of aclAceIndexList is the aclIpv6AceEntry. Enumeration: 'ipAce': 2, 'noType': 0, 'macAce': 1, 'ipv6Ace': 3.
                                           aclAttachCtlAceIndex 1.3.6.1.4.1.259.8.1.11.1.17.7.13.3 integer32 read-write
Index for attachment control. Specifies the ACE to relate with the aclAttachCtlIndex. When aclAttachCtlAceType is macAce(1), the value of aclAttachCtlIndex is the diffServMacAceEntry. When aclAttachCtlAceType is ipAce(2), the value of aclAttachCtlIndex is the diffServIpAceEntry. When aclAttachCtlAceType is ipv6Ace(3), the value of aclAttachCtlIndex is the diffServIpv6AceEntry.
                                           aclAttachCtlAction 1.3.6.1.4.1.259.8.1.11.1.17.7.13.4 integer read-write
Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular ACE is attached to a particular ACL. When setting this object to detach(3) to begin the not attached operation, then a particular ACE is not attached to a particular ACL. When the action is finshed whether successfully or not, or no action is taken, the value of this object always is noAction(1), The value of a particular ACL is specified in the aclAttachCtlAceType and aclAttachCtlAceIndex. Enumeration: 'attach': 2, 'detach': 3, 'noAction': 1.
                                 ipFilterMgt 1.3.6.1.4.1.259.8.1.11.1.17.9
                                     ipFilterSnmpInetTable 1.3.6.1.4.1.259.8.1.11.1.17.9.12 no-access
A list of IP address entries.
                                           ipFilterSnmpInetEntry 1.3.6.1.4.1.259.8.1.11.1.17.9.12.1 no-access
This entry includes an IP address range which the system will allow to connect to this device through SNMP.
                                               ipFilterSnmpInetAddressType 1.3.6.1.4.1.259.8.1.11.1.17.9.12.1.1 inetaddresstype no-access
The type of IP address filter. Only supports IPv4 and IPv6 address types.
                                               ipFilterSnmpInetAddressStart 1.3.6.1.4.1.259.8.1.11.1.17.9.12.1.2 inetaddress no-access
The start IP address.
                                               ipFilterSnmpInetAddressEnd 1.3.6.1.4.1.259.8.1.11.1.17.9.12.1.3 inetaddress read-only
The end IP address.
                                               ipFilterSnmpInetStatus 1.3.6.1.4.1.259.8.1.11.1.17.9.12.1.4 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                                     ipFilterHttpInetTable 1.3.6.1.4.1.259.8.1.11.1.17.9.13 no-access
A list of IP address entries.
                                           ipFilterHttpInetEntry 1.3.6.1.4.1.259.8.1.11.1.17.9.13.1 no-access
This entry includes an IP address range which the system will allow to connect to this device through SNMP.
                                               ipFilterHttpInetAddressType 1.3.6.1.4.1.259.8.1.11.1.17.9.13.1.1 inetaddresstype no-access
The type of IP address filter . Only supports IPv4 and IPv6 address types.
                                               ipFilterHttpInetAddressStart 1.3.6.1.4.1.259.8.1.11.1.17.9.13.1.2 inetaddress no-access
The start IP address.
                                               ipFilterHttpInetAddressEnd 1.3.6.1.4.1.259.8.1.11.1.17.9.13.1.3 inetaddress read-only
The end IP address.
                                               ipFilterHttpInetStatus 1.3.6.1.4.1.259.8.1.11.1.17.9.13.1.4 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                                     ipFilterTelnetInetTable 1.3.6.1.4.1.259.8.1.11.1.17.9.14 no-access
A list of IP address entries.
                                           ipFilterTelnetInetEntry 1.3.6.1.4.1.259.8.1.11.1.17.9.14.1 no-access
This entry includes an IP address range which the system will allow them to connect to this device through SNMP.
                                               ipFilterTelnetInetAddressType 1.3.6.1.4.1.259.8.1.11.1.17.9.14.1.1 inetaddresstype no-access
The type of IP address filter . Only supports IPv4 and IPv6 address types.
                                               ipFilterTelnetInetAddressStart 1.3.6.1.4.1.259.8.1.11.1.17.9.14.1.2 inetaddress no-access
The start IP address.
                                               ipFilterTelnetInetAddressEnd 1.3.6.1.4.1.259.8.1.11.1.17.9.14.1.3 inetaddress read-only
The end IP address.
                                               ipFilterTelnetInetStatus 1.3.6.1.4.1.259.8.1.11.1.17.9.14.1.4 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                                     ipFilterAllClientCtl 1.3.6.1.4.1.259.8.1.11.1.17.9.15
                                           ipFilterAllClientCtlInetAddressType 1.3.6.1.4.1.259.8.1.11.1.17.9.15.1 inetaddresstype read-write
The type of IP address filter. Only supports IPv4 and IPv6 address types.
                                           ipFilterAllClientCtlInetAddressStart 1.3.6.1.4.1.259.8.1.11.1.17.9.15.2 inetaddress read-write
The start IP address.
                                           ipFilterAllClientCtlInetAddressEnd 1.3.6.1.4.1.259.8.1.11.1.17.9.15.3 inetaddress read-write
The end IP address.
                                           ipFilterAllClientCtlAction 1.3.6.1.4.1.259.8.1.11.1.17.9.15.4 integer read-write
Action for IP filter control. Set this object to create(2) to create entries in the ipFilterSnmpInetTable, ipFilterHttpInetTable and ipFilterTelnetInetTable. Set this object to destroy(3) to destroy specified entries in the ipFilterSnmpInetTable, ipFilterHttpInetTable and ipFilterTelnetInetTable. When the action is finshed, whether successfully or not, or no action is taken, the value of this object is always noAction(1). Enumeration: 'destroy': 3, 'create': 2, 'noAction': 1.
                                 userAuthMgt 1.3.6.1.4.1.259.8.1.11.1.17.10
                                       userAuthEnablePassword 1.3.6.1.4.1.259.8.1.11.1.17.10.3 displaystring read-write
Set enable password or delete enable password. NULL is used to delete the enable password. The password is starting with alphanumeric.
                                       userAuthMethod 1.3.6.1.4.1.259.8.1.11.1.17.10.4 integer read-write
Set user authencation method for system. Enumeration: 'radiuslocaltacacs': 8, 'radiuslocal': 7, 'tacacsradius': 14, 'radiustacacs': 9, 'localtacacsradius': 5, 'radiustacacslocal': 10, 'tacacslocalradius': 13, 'radius': 6, 'localtacacs': 4, 'tacacs': 11, 'localradius': 2, 'tacacslocal': 12, 'local': 1, 'localradiustacacs': 3, 'tacacsradiuslocal': 15.
                                       userAuthTable 1.3.6.1.4.1.259.8.1.11.1.17.10.5 no-access
This table is for creating the new user.
                                           userAuthEntry 1.3.6.1.4.1.259.8.1.11.1.17.10.5.1 no-access
Entries in this table correspond to the users entries in system.
                                               userAuthUserName 1.3.6.1.4.1.259.8.1.11.1.17.10.5.1.1 displaystring no-access
The name of the user. The user name is starting with alphanumeric.
                                               userAuthPassword 1.3.6.1.4.1.259.8.1.11.1.17.10.5.1.2 displaystring read-only
Specifies the user password. zero length input will set the user enrty without password. If the user is not exist, it will create the user with the giving password and privilege 0. The password is starting with alphanumeric.
                                               userAuthPrivilege 1.3.6.1.4.1.259.8.1.11.1.17.10.5.1.3 integer32 read-only
Specifies the user level. If the user is not exist, it will create the user with the giving privilege with none password. Privilege 15 is maximum privilege that only can be applied to system administrator.
                                               userAuthPublicKey 1.3.6.1.4.1.259.8.1.11.1.17.10.5.1.4 displaystring read-only
User public key, the value can be 'RSA' or 'DSA' or 'Both' or 'None'.
                                               userAuthStatus 1.3.6.1.4.1.259.8.1.11.1.17.10.5.1.5 integer32 read-only
This node is used to create the user entry by '1' and to delete one user entry by '0'.
                                 dot1xMgt 1.3.6.1.4.1.259.8.1.11.1.17.11
                                       dot1xAuthConfigExtTable 1.3.6.1.4.1.259.8.1.11.1.17.11.1 no-access
The extension table of dot1xAuthConfigTable.
                                           dot1xAuthConfigExtEntry 1.3.6.1.4.1.259.8.1.11.1.17.11.1.1 no-access
The entry of dot1xAuthConfigExtTable.
                                               dot1xAuthConfigExtOperMode 1.3.6.1.4.1.259.8.1.11.1.17.11.1.1.1 integer read-write
The operation mode of dot1x port which allows host connection to 802.1x-authorized ports. Enumeration: 'singleHost': 1, 'macBasedAuth': 3, 'multiHost': 2.
                                               dot1xAuthConfigExtMultiHostMaxCnt 1.3.6.1.4.1.259.8.1.11.1.17.11.1.1.2 integer32 read-write
The maximum number of hosts when the dot1xAuthConfigExtOperMode is multiHost(2). When the operation Mode is singleHost(1), we can ignore this variables.
                                               dot1xAuthConfigExtPortIntrusionAction 1.3.6.1.4.1.259.8.1.11.1.17.11.1.1.3 integer read-write
Responses to intrusion when the authentication is failed; block-traffic(1) means that to block traffic when the authentication is failed and guest-vlan(2) means that to join to a guest VLAN when the authentication is failed. Enumeration: 'guest-vlan': 2, 'block-traffic': 1.
                                       dot1xEapolPassThrough 1.3.6.1.4.1.259.8.1.11.1.17.11.3 enabledstatus read-write
When this variable is enabled(1), EAPOL frames will be forwarded to all ports where the Spanning Tree status is forwarding. When this variable is disabled(2), EAPOL frames will be discarded. EAPOL Pass-Through operates when the global status of 802.1X is disabled.
                                 aaaMgt 1.3.6.1.4.1.259.8.1.11.1.17.12
                                       aaaMethodTable 1.3.6.1.4.1.259.8.1.11.1.17.12.1 no-access
Contains the settings needed for accounting.
                                           aaaMethodEntry 1.3.6.1.4.1.259.8.1.11.1.17.12.1.1 no-access
A conceptual row in the aaaMethodTable.
                                               aaaMethodIndex 1.3.6.1.4.1.259.8.1.11.1.17.12.1.1.1 integer32 no-access
Specifies the index for the entry.
                                               aaaMethodName 1.3.6.1.4.1.259.8.1.11.1.17.12.1.1.2 displaystring read-only
Name for the method.
                                               aaaMethodGroupName 1.3.6.1.4.1.259.8.1.11.1.17.12.1.1.3 displaystring read-only
Name for the server to use, pointing to aaaRadiusGroupName or aaaTacacsPlusGroupName.
                                               aaaMethodMode 1.3.6.1.4.1.259.8.1.11.1.17.12.1.1.4 integer read-only
start-stop(1),sends a 'start' accounting notice at the beginning of a process and a 'stop' accounting notice at the end of a process. The 'start' accounting record is sent in the background. The requested user process begins regardless of whether or not the 'start' accounting notice was received by the accounting server. Enumeration: 'start-stop': 1.
                                               aaaMethodStatus 1.3.6.1.4.1.259.8.1.11.1.17.12.1.1.5 validstatus read-only
Set to 1 to initiate the aaaMethodTable, 2 to destroy the table.
                                               aaaMethodClientType 1.3.6.1.4.1.259.8.1.11.1.17.12.1.1.6 integer read-only
dot1x(1): Provides accounting service for 802.1x activity; exec(2): Provides accounting service for EXEC connection such as Telnet, SSH or console; commands(3): Provides accounting service for command privileges. Enumeration: 'commands': 3, 'dot1x': 1, 'exec': 2.
                                               aaaMethodPrivilegeLevel 1.3.6.1.4.1.259.8.1.11.1.17.12.1.1.7 integer read-only
Specifies the privilege level for the entry. When aaaMethodClientType is in the mode of command(3), the privilege level is enabled to be accessed.
                                       aaaRadiusGroupTable 1.3.6.1.4.1.259.8.1.11.1.17.12.2 no-access
Uses a subset of RADIUS servers for accounting as defined by the server group
                                           aaaRadiusGroupEntry 1.3.6.1.4.1.259.8.1.11.1.17.12.2.1 no-access
A conceptual row of aaaRadiusGroupEntry.
                                               aaaRadiusGroupIndex 1.3.6.1.4.1.259.8.1.11.1.17.12.2.1.1 integer32 no-access
Specifies the index for the entry.
                                               aaaRadiusGroupServerBitMap 1.3.6.1.4.1.259.8.1.11.1.17.12.2.1.2 octet string read-only
Identifies which RADIUS sever to use, each bit points to each radius server. 80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2.
                                               aaaRadiusGroupName 1.3.6.1.4.1.259.8.1.11.1.17.12.2.1.3 displaystring read-only
Uses a subset of servers for accounting as defined by the server group. The same name as aaaTacasPlusGroupName is not allowed.
                                               aaaRadiusGroupStatus 1.3.6.1.4.1.259.8.1.11.1.17.12.2.1.4 validstatus read-only
Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.
                                       aaaTacacsPlusGroupTable 1.3.6.1.4.1.259.8.1.11.1.17.12.3 no-access
Uses a subset of TACACS+ servers for accounting as defined by the server group
                                           aaaTacacsPlusGroupEntry 1.3.6.1.4.1.259.8.1.11.1.17.12.3.1 no-access
A conceptual row of aaaTacacsPlusGroupEntry.
                                               aaaTacacsPlusGroupIndex 1.3.6.1.4.1.259.8.1.11.1.17.12.3.1.1 integer32 no-access
Specifies the index for the entry.
                                               aaaTacacsPlusGroupServerBitMap 1.3.6.1.4.1.259.8.1.11.1.17.12.3.1.2 octet string read-only
Identifies which TACACS+ sever to use.
                                               aaaTacacsPlusGroupName 1.3.6.1.4.1.259.8.1.11.1.17.12.3.1.3 displaystring read-only
Uses a subset of servers for accounting as defined by the server group. We can't have the same name as aaaRadiusGroupName
                                               aaaTacacsPlusGroupStatus 1.3.6.1.4.1.259.8.1.11.1.17.12.3.1.4 validstatus read-only
Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.
                                       aaaUpdate 1.3.6.1.4.1.259.8.1.11.1.17.12.4 integer32 read-write
Specifies the periodic interim accounting records to be sent to the accounting server and periodic intervals to send accounting update records(in minutes).
                                       aaaAccountTable 1.3.6.1.4.1.259.8.1.11.1.17.12.5 no-access
Specifies an interface or a set of interfaces that the accounting method list will be applied to.
                                           aaaAccountEntry 1.3.6.1.4.1.259.8.1.11.1.17.12.5.1 no-access
A conceptual row of aaaAccountTable.
                                               aaaAccountIfIndex 1.3.6.1.4.1.259.8.1.11.1.17.12.5.1.1 interfaceindex no-access
Defined as the ifIndex
                                               aaaAccountMethodName 1.3.6.1.4.1.259.8.1.11.1.17.12.5.1.2 displaystring read-only
Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default.
                                               aaaAccountProtocol 1.3.6.1.4.1.259.8.1.11.1.17.12.5.1.3 integer read-only
Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use.
                                               aaaAccountStatus 1.3.6.1.4.1.259.8.1.11.1.17.12.5.1.4 validstatus read-only
Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.
                                       aaaCommandPrivilegesTable 1.3.6.1.4.1.259.8.1.11.1.17.12.8 no-access
Contains the settings needed for command privileges.
                                           aaaCommandPrivilegesEntry 1.3.6.1.4.1.259.8.1.11.1.17.12.8.1 no-access
A conceptual row in the aaaCommandPrivilegesTable.
                                               aaaCommandPrivilegesLevel 1.3.6.1.4.1.259.8.1.11.1.17.12.8.1.1 integer no-access
Specifies the privilege level index for the entry.
                                               aaaCommandPrivilegesInterfaceIndex 1.3.6.1.4.1.259.8.1.11.1.17.12.8.1.2 integer no-access
Specifies the interface index for the entry. Enumeration: 'vty': 2, 'console': 1.
                                               aaaCommandPrivilegesMethodName 1.3.6.1.4.1.259.8.1.11.1.17.12.8.1.3 displaystring read-only
Specifies the method name in the lists under the mode of command privileges.
                                       aaaAccExecTable 1.3.6.1.4.1.259.8.1.11.1.17.12.9 no-access
Specifies an interface or a set of interfaces that the accounting method list will be applied to.
                                           aaaAccExecEntry 1.3.6.1.4.1.259.8.1.11.1.17.12.9.1 no-access
A conceptual row of aaaAccExecTable.
                                               aaaAccExecIndex 1.3.6.1.4.1.259.8.1.11.1.17.12.9.1.1 integer no-access
The method of accessing CLI management. Enumeration: 'vty': 2, 'console': 1.
                                               aaaAccExecMethodName 1.3.6.1.4.1.259.8.1.11.1.17.12.9.1.2 displaystring read-only
Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default.
                                 networkAccessMgt 1.3.6.1.4.1.259.8.1.11.1.17.13
                                       networkAccessPortTable 1.3.6.1.4.1.259.8.1.11.1.17.13.2 no-access
A table contains the information of network access about every port.
                                           networkAccessPortEntry 1.3.6.1.4.1.259.8.1.11.1.17.13.2.1 no-access
A conceptual row in the networkAccessPort table.
                                               networkAccessPortPortIndex 1.3.6.1.4.1.259.8.1.11.1.17.13.2.1.1 interfaceindex no-access
The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this port index is the same interface identified by the same value of ifIndex in the IF-MIB.
                                               networkAccessPortDynamicVlan 1.3.6.1.4.1.259.8.1.11.1.17.13.2.1.2 enabledstatus read-write
Sets enabled(1) to enable dynamic VLAN assigment and sets disabled(2) to disable dynamic VLAN assigment.
                                               networkAccessPortMaxMacCount 1.3.6.1.4.1.259.8.1.11.1.17.13.2.1.3 integer read-write
Specifies the maximum number of authenticated MAC address.
                                               networkAccessPortMode 1.3.6.1.4.1.259.8.1.11.1.17.13.2.1.4 enabledstatus read-write
Specifies the secure port mode. enabled(1) means that Mac address authentication is used and disabled(2) means that the authentication is disabled.
                                               networkAccessPortMacFilter 1.3.6.1.4.1.259.8.1.11.1.17.13.2.1.5 integer read-write
Specifies the MAC filter ID, Set this variable to zero to disable MAC filter.
                                               networkAccessPortGuestVlan 1.3.6.1.4.1.259.8.1.11.1.17.13.2.1.6 integer read-write
Specifies the guest VLAN ID. To disable the VLAN, set the value to 0.
                                               networkAccessPortLinkDetectionStatus 1.3.6.1.4.1.259.8.1.11.1.17.13.2.1.7 enabledstatus read-write
Set this object to enabled(1) to enable link detection. Set this object to disabled(2) to disable link detection.
                                               networkAccessPortLinkDetectionMode 1.3.6.1.4.1.259.8.1.11.1.17.13.2.1.8 integer read-write
Specifies the detection event for a port. Set this object to linkUp(1) to detect a link-up event. Set this object to linkDown(2) to detect a link-down event. Set this object to linkUpDown(3) to detect both link up and link down events. Enumeration: 'linkUp': 1, 'linkDown': 2, 'linkUpDown': 3.
                                               networkAccessPortLinkDetectionAciton 1.3.6.1.4.1.259.8.1.11.1.17.13.2.1.9 integer read-write
Specifies the action to take when a networkAccessPortLinkDetection event is triggered. Set this object to trap(1) to send a trap when a networkAccessPortLinkDetection event is triggered. Set this object to shutDown(2) to shut down the port when a networkAccessPortLinkDetection event is triggered. Set this object to trapAndShutDown(3) to send a trap and shut down the port when a networkAccessPortLinkDetection event is triggered. Enumeration: 'trap': 1, 'shutDown': 2, 'trapAndShutDown': 3.
                                               networkAccessPortDynamicQos 1.3.6.1.4.1.259.8.1.11.1.17.13.2.1.10 enabledstatus read-write
Set this object to enabled(1) to enable Dynamic QoS. Set this object to disabled(2) to disable Dynamic QoS.
                                       networkAccessClearMacAddressMgt 1.3.6.1.4.1.259.8.1.11.1.17.13.3
                                           networkAccessClearMacAddressAttribute 1.3.6.1.4.1.259.8.1.11.1.17.13.3.1 integer read-write
Attribute for clearing Mac address. Specifies the certain attribute in Mac address table. all(1) indicates both reauthorized and learnt secure MAC address; static(2) indicates reauthorized MAC address; dynamic(3) indicates learnt secure MAC address. Enumeration: 'static': 2, 'all': 1, 'dynamic': 3.
                                           networkAccessClearMacAddressMacAddress 1.3.6.1.4.1.259.8.1.11.1.17.13.3.2 macaddress read-write
Specifies MAC address in the MAC address table for clearing MAC address. '000000' represents that no MAC address is specified.
                                           networkAccessClearMacAddressPort 1.3.6.1.4.1.259.8.1.11.1.17.13.3.3 integer32 read-write
The specifies port in the MAC address table for clearing MAC address. '0' represents that no port is specified.
                                           networkAccessClearMacAddressAction 1.3.6.1.4.1.259.8.1.11.1.17.13.3.4 integer read-write
Action for clearing MAC address . When setting this object to clear(2) to begin the clearing MAC address operation, a particular MAC address is cleared from the MAC address table. When the action is finshed whether or not it is successful or no action is taken, the value of this object is always noclear(1). Enumeration: 'clear': 2, 'noclear': 1.
                                       networkAccessMacAddressTable 1.3.6.1.4.1.259.8.1.11.1.17.13.4 no-access
Contains the information of network access MAC addresses.
                                           networkAccessMacAddressEntry 1.3.6.1.4.1.259.8.1.11.1.17.13.4.1 no-access
A conceptual row in the networkAccessMacAddress table.
                                               networkAccessMacAddressAddress 1.3.6.1.4.1.259.8.1.11.1.17.13.4.1.1 macaddress no-access
Specifies the authenticated MAC address.
                                               networkAccessMacAddressPort 1.3.6.1.4.1.259.8.1.11.1.17.13.4.1.2 interfaceindex no-access
Specifies the port of authenticated MAC address.
                                               networkAccessMacAddressInetAddressType 1.3.6.1.4.1.259.8.1.11.1.17.13.4.1.3 inetaddresstype read-only
This object indicates the type of IP address denoted in networkAccessMacAddressRadiusServerInetAddress type.
                                               networkAccessMacAddressRadiusServerInetAddress 1.3.6.1.4.1.259.8.1.11.1.17.13.4.1.4 inetaddress read-only
Displays the IP address of radius server that authenticates the specified Mac address.
                                               networkAccessMacAddressTime 1.3.6.1.4.1.259.8.1.11.1.17.13.4.1.5 displaystring read-only
Displays the authentication time of the authenticated MAC address. The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'. 'yyyy' is a four-digit year. 'MM' is a month. A single-digit month is preceded by a zero. 'DD' is the day of a month. A single-digit day is preceded by the value zero. 'HH', 'MM' and 'SS' are hour, minute, and second respectively. A single-digit hour, minute, and second are preceded by a zero value. An example is: '2001y 01m 01d 00h 04m 43s'.
                                               networkAccessMacAddressAttribute 1.3.6.1.4.1.259.8.1.11.1.17.13.4.1.6 integer read-only
Displays the attribute of an authenticated MAC address. static(1) indicates resauthorized secure MAC address. dynamic(2) indicates learnt secure MAC address. Enumeration: 'static': 1, 'dynamic': 2.
                                       networkAccessAging 1.3.6.1.4.1.259.8.1.11.1.17.13.5 enabledstatus read-write
Set this object to enabled(1) to enable MAC address aging feature. Set this object to disabled(2) to disable MAC address aging feature.
                                       networkAccessMacFilterWithMaskTable 1.3.6.1.4.1.259.8.1.11.1.17.13.6 no-access
Contains the settings for MAC filter.
                                           networkAccessMacFilterWithMaskEntry 1.3.6.1.4.1.259.8.1.11.1.17.13.6.1 no-access
A conceptual row in the networkAccessMacFilterWithMaskTable.
                                               networkAccessMacFilterWithMaskID 1.3.6.1.4.1.259.8.1.11.1.17.13.6.1.1 integer no-access
Specifies the MAC filter ID.
                                               networkAccessMacFilterWithMaskMacAddress 1.3.6.1.4.1.259.8.1.11.1.17.13.6.1.2 macaddress no-access
Specifies the MAC address to be filtered.
                                               networkAccessMacFilterWithMaskMacAddressMask 1.3.6.1.4.1.259.8.1.11.1.17.13.6.1.3 macaddress no-access
Specifies the MAC mask to be filtered.
                                               networkAccessMacFilterWithMaskStatus 1.3.6.1.4.1.259.8.1.11.1.17.13.6.1.4 validstatus read-only
Set this object to valid(1) to create an entry. Set this object to invalid(2) to destroy an entry.
                                 macAuthMgt 1.3.6.1.4.1.259.8.1.11.1.17.14
                                       macAuthReauthTime 1.3.6.1.4.1.259.8.1.11.1.17.14.1 integer32 read-write
Specifies the reauthentication time period.
                                       macAuthPortTable 1.3.6.1.4.1.259.8.1.11.1.17.14.2 no-access
Contains the settings for mac authentication of each port.
                                           macAuthPortEntry 1.3.6.1.4.1.259.8.1.11.1.17.14.2.1 no-access
A conceptual row in the macAuthPort table.
                                               macAuthPortIndex 1.3.6.1.4.1.259.8.1.11.1.17.14.2.1.1 interfaceindex no-access
The port and the trunk (including trunk members) interface of the port table. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.
                                               macAuthPortMaxMacCount 1.3.6.1.4.1.259.8.1.11.1.17.14.2.1.2 integer read-write
Specifies the maximum number of authenticated MAC addresses for MAC authentication.
                                               macAuthPortIntrusionAction 1.3.6.1.4.1.259.8.1.11.1.17.14.2.1.3 integer read-write
Responses to intrusion when the authentication is failed. block-traffic(1) : denies network access to an unauthorized client; pass-traffic(2) : allows unauthorized clients to the access network. Enumeration: 'block-traffic': 1, 'pass-traffic': 2.
                                 webAuthMgt 1.3.6.1.4.1.259.8.1.11.1.17.15
                                       webAuthSystemAuthControl 1.3.6.1.4.1.259.8.1.11.1.17.15.1 enabledstatus read-write
Sets enabled(1) to enable WebAuth feature and sets disabled(2) to disable WebAuth feature.
                                       webAuthSessionTimeout 1.3.6.1.4.1.259.8.1.11.1.17.15.5 integer read-write
For authenticated success users, they can use internet service during a certain period. Whenever this period expires, users need to be re-authenticated again. This period is called session time.
                                       webAuthQuietPeriod 1.3.6.1.4.1.259.8.1.11.1.17.15.6 integer read-write
Specifies the re-authentication interval when the authentication fail attempts reach the webAuthLoginAttempts value. Unauthenticated user won't be authenticated during this period.
                                       webAuthLoginAttempts 1.3.6.1.4.1.259.8.1.11.1.17.15.7 integer read-write
Specifies the counter that configures the authentication fail times for a client. If authentication fail times reaches the specified value, the client are not allowed to login for some period.
                                       webAuthReauthenticateMgt 1.3.6.1.4.1.259.8.1.11.1.17.15.8
                                           webAuthReauthenticatePort 1.3.6.1.4.1.259.8.1.11.1.17.15.8.1 integer read-write
Specifies the port to re-authenticate for all of its authenticated hosts.
                                           webAuthReauthenticateInetAddressType 1.3.6.1.4.1.259.8.1.11.1.17.15.8.2 inetaddresstype read-write
Specifies host type to re-authenticate.
                                           webAuthReauthenticateInetAddress 1.3.6.1.4.1.259.8.1.11.1.17.15.8.3 inetaddress read-write
Specificies host to re-authenticate.
                                           webAuthReauthenticateAction 1.3.6.1.4.1.259.8.1.11.1.17.15.8.4 integer read-write
Action for WebAuth re-authenication. When setting this object to reauth(2) to begin the re-authenticated operation, a particular user is re-authenticated. When the action is finshed whether it is successfully, or no action is taken, the value of this object is always noReauth(1). Enumeration: 'noReauth': 1, 'reauth': 2.
                                       webAuthPortConfigTable 1.3.6.1.4.1.259.8.1.11.1.17.15.9 no-access
Contains the settings for web authentication of each port.
                                           webAuthPortConfigEntry 1.3.6.1.4.1.259.8.1.11.1.17.15.9.1 no-access
A conceptual row in the webAuthPortConfigTable.
                                               webAuthPortConfigPortIndex 1.3.6.1.4.1.259.8.1.11.1.17.15.9.1.1 interfaceindex no-access
The port number of the port that may specify certain entry in the table which contains web authentication information.
                                               webAuthPortConfigStatus 1.3.6.1.4.1.259.8.1.11.1.17.15.9.1.2 enabledstatus read-write
Sets enabled(1) to enable web authentication feature for each port and sets disabled(2) to disable web authentication for each port.
                                               webAuthPortConfigAuthenticatedHostCount 1.3.6.1.4.1.259.8.1.11.1.17.15.9.1.3 integer read-only
Displays the authenticated host counts for each port
                                       webAuthPortInfoTable 1.3.6.1.4.1.259.8.1.11.1.17.15.10 no-access
Contains the information for web authentication of each port.
                                             webAuthPortInfoEntry 1.3.6.1.4.1.259.8.1.11.1.17.15.10.1 no-access
A conceptual row in the webAuthPortTable.
                                                 webAuthPortInfoPortIndex 1.3.6.1.4.1.259.8.1.11.1.17.15.10.1.1 interfaceindex no-access
The port number for which this entry contains web authentication information.
                                                 webAuthPortInfoPortAuthSuccessIndex 1.3.6.1.4.1.259.8.1.11.1.17.15.10.1.2 integer no-access
The authentication success number of port for which this entry contains web authentication information.
                                                 webAuthPortInfoInetAddressType 1.3.6.1.4.1.259.8.1.11.1.17.15.10.1.3 inetaddresstype read-only
This object indicates the type of IP address denoted in webAuthPortInfoIpAddress type.
                                                 webAuthPortInfoInetAddress 1.3.6.1.4.1.259.8.1.11.1.17.15.10.1.4 inetaddress read-only
The IP address which may specify the entry containing web authentication information.
                                                 webAuthPortInfoRemainingSessiontime 1.3.6.1.4.1.259.8.1.11.1.17.15.10.1.5 integer read-only
The remaining session time for authenticated hosts. During this period, they may use internet resource. When the session time expires, they will need to re-authenticate again.
                                                 webAuthPortInfoStatus 1.3.6.1.4.1.259.8.1.11.1.17.15.10.1.6 integer read-only
Displays the web authentication status for each port. authenticated (1) means the user is authenticated. Enumeration: 'authenticated': 1.
                                 dosMgt 1.3.6.1.4.1.259.8.1.11.1.17.16
                                       system 1.3.6.1.4.1.259.8.1.11.1.17.16.1
                                           dosEchoChargen 1.3.6.1.4.1.259.8.1.11.1.17.16.1.1
                                               dosEchoChargenStatus 1.3.6.1.4.1.259.8.1.11.1.17.16.1.1.1 enabledstatus read-write
The status of Echo/Chargen protection. Set this to enabled(1) to enable the feature, and set this to disabled(2) to disable the feature.
                                               dosEchoChargenRateLimitInKilo 1.3.6.1.4.1.259.8.1.11.1.17.16.1.1.2 integer32 read-write
Value of the rate limit for Echo/Chargen packets. The unit is kilobits per second.
                                           dosSmurf 1.3.6.1.4.1.259.8.1.11.1.17.16.1.3
                                               dosSmurfStatus 1.3.6.1.4.1.259.8.1.11.1.17.16.1.3.1 enabledstatus read-write
The status of Smurf protection. Set this to enabled(1) to enable the feature, and set this to disabled(2) to disable the feature.
                                           dosTcpFlooding 1.3.6.1.4.1.259.8.1.11.1.17.16.1.4
                                               dosTcpFloodingStatus 1.3.6.1.4.1.259.8.1.11.1.17.16.1.4.1 enabledstatus read-write
The status of TCP flooding protection. Set this to enabled(1) to enable the feature, and set this to disabled(2) to disable the feature.
                                               dosTcpFloodingRateLimitInKilo 1.3.6.1.4.1.259.8.1.11.1.17.16.1.4.2 integer32 read-write
Value of the rate limit for TCP flooding packets. The unit is kilobits per second.
                                           dosTcpNullScan 1.3.6.1.4.1.259.8.1.11.1.17.16.1.5
                                               dosTcpNullScanStatus 1.3.6.1.4.1.259.8.1.11.1.17.16.1.5.1 enabledstatus read-write
The status of TCP Null-scan protection. Set this to enabled(1) to enable the feature, and set this to disabled(2) to disable the feature.
                                           dosTcpSynFinScan 1.3.6.1.4.1.259.8.1.11.1.17.16.1.6
                                               dosTcpSynFinScanStatus 1.3.6.1.4.1.259.8.1.11.1.17.16.1.6.1 enabledstatus read-write
The status of TCP SYN FIN scan protection. Set this to enabled(1) to enable the feature, and set this to disabled(2) to disable the feature.
                                           dosTcpXmasScan 1.3.6.1.4.1.259.8.1.11.1.17.16.1.7
                                               dosTcpXmasScanStatus 1.3.6.1.4.1.259.8.1.11.1.17.16.1.7.1 enabledstatus read-write
The status of TCP Xmas-scan protection. Set this to enabled(1) to enable the feature, and set this to disabled(2) to disable the feature.
                                           dosUdpFlooding 1.3.6.1.4.1.259.8.1.11.1.17.16.1.8
                                               dosUdpFloodingStatus 1.3.6.1.4.1.259.8.1.11.1.17.16.1.8.1 enabledstatus read-write
The status of UDP flooding protection. Set this to enabled(1) to enable the feature, and set this to disabled(2) to disable the feature.
                                               dosUdpFloodingRateLimitInKilo 1.3.6.1.4.1.259.8.1.11.1.17.16.1.8.2 integer32 read-write
Value of the rate limit for UDP flooding packets. The unit is kilobits per second.
                                           dosWinNuke 1.3.6.1.4.1.259.8.1.11.1.17.16.1.9
                                               dosWinNukeStatus 1.3.6.1.4.1.259.8.1.11.1.17.16.1.9.1 enabledstatus read-write
The status of WinNUKE protection. Set this to enabled(1) to enable the feature, and set this to disabled(2) to disable the feature.
                                               dosWinNukeRateLimitInKilo 1.3.6.1.4.1.259.8.1.11.1.17.16.1.9.2 integer32 read-write
Value of the rate limit for WinNUKE packets. The unit is kilobits per second.
                                           dosTcpUdpPortZero 1.3.6.1.4.1.259.8.1.11.1.17.16.1.11
                                                 dosTcpUdpPortZeroStatus 1.3.6.1.4.1.259.8.1.11.1.17.16.1.11.1 enabledstatus read-write
The status of checking for TCP/UDP packets with port 0. Set this to enabled(1) to enable the feature, and set this to disabled(2) to disable the feature.
                                 appFilterMgt 1.3.6.1.4.1.259.8.1.11.1.17.17
                                       appFilterPortTable 1.3.6.1.4.1.259.8.1.11.1.17.17.1 no-access
The application filter Table.
                                           appFilterPortEntry 1.3.6.1.4.1.259.8.1.11.1.17.17.1.1 no-access
The entry of appFilterPortTable.
                                               appFilterPortIndex 1.3.6.1.4.1.259.8.1.11.1.17.17.1.1.1 interfaceindex no-access
The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                               appFilterProtocolType 1.3.6.1.4.1.259.8.1.11.1.17.17.1.1.2 integer no-access
The protocol type define some specific packets which are supported on this function Enumeration: 'pvst': 2, 'cdp': 1.
                                               appFilterPktStatus 1.3.6.1.4.1.259.8.1.11.1.17.17.1.1.3 integer read-write
Set discard(1) to discard packet and set default(0) to transmit packet in default behavior. Enumeration: 'default': 0, 'discard': 1.
                           sysLogMgt 1.3.6.1.4.1.259.8.1.11.1.19
                                 sysLogStatus 1.3.6.1.4.1.259.8.1.11.1.19.1 enabledstatus read-write
Whether the system log is enabled.
                                 sysLogHistoryFlashLevel 1.3.6.1.4.1.259.8.1.11.1.19.2 integer32 read-write
Severity level for logging to flash.
                                 sysLogHistoryRamLevel 1.3.6.1.4.1.259.8.1.11.1.19.3 integer32 read-write
Severity level for logging to RAM.
                                 remoteLogMgt 1.3.6.1.4.1.259.8.1.11.1.19.6
                                     remoteLogStatus 1.3.6.1.4.1.259.8.1.11.1.19.6.1 enabledstatus read-write
Whether the remote log system is enabled.
                                     remoteLogLevel 1.3.6.1.4.1.259.8.1.11.1.19.6.2 integer32 read-write
Severity level for remote log.
                                     remoteLogFacilityType 1.3.6.1.4.1.259.8.1.11.1.19.6.3 integer read-write
The facility type for remote log. Enumeration: 'localUse3': 19, 'localUse2': 18, 'localUse1': 17, 'localUse0': 16, 'localUse7': 23, 'localUse6': 22, 'localUse5': 21, 'localUse4': 20.
                                     remoteLogServerInetTable 1.3.6.1.4.1.259.8.1.11.1.19.6.7 no-access
A table for storing the remote log server list.
                                         remoteLogServerInetEntry 1.3.6.1.4.1.259.8.1.11.1.19.6.7.1 no-access
A conceptual row for remoteLogServerInetTable.
                                             remoteLogServerInetAddressType 1.3.6.1.4.1.259.8.1.11.1.19.6.7.1.1 inetaddresstype no-access
Indicates the type of address denoted in remoteLogServerInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported.
                                             remoteLogServerInetAddress 1.3.6.1.4.1.259.8.1.11.1.19.6.7.1.2 inetaddress no-access
The IP address of the remote log Server.
                                             remoteLogServerStatus 1.3.6.1.4.1.259.8.1.11.1.19.6.7.1.3 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                                             remoteLogServerUdpPort 1.3.6.1.4.1.259.8.1.11.1.19.6.7.1.4 integer32 read-write
The UDP port number of the remote log Server
                                 smtpMgt 1.3.6.1.4.1.259.8.1.11.1.19.7
                                     smtpStatus 1.3.6.1.4.1.259.8.1.11.1.19.7.1 enabledstatus read-write
Set enabled(1) to enable the SMTP, set disabled(2) to disable the SMTP.
                                     smtpSeverityLevel 1.3.6.1.4.1.259.8.1.11.1.19.7.2 integer32 read-write
Specify the SMTP minimum severity level to send the event message.
                                     smtpSourceEMail 1.3.6.1.4.1.259.8.1.11.1.19.7.3 displaystring read-write
SMTP source email address, the sender's mail address that appears in the 'From' field of the mail.
                                     smtpServerIpTable 1.3.6.1.4.1.259.8.1.11.1.19.7.4 no-access
The SMTP server IP table. The maximum servers to be added is 3.
                                         smtpServerIpEntry 1.3.6.1.4.1.259.8.1.11.1.19.7.4.1 no-access
A conceptual row of the smtpServerIpTable.
                                             smtpServerIp 1.3.6.1.4.1.259.8.1.11.1.19.7.4.1.1 ipaddress no-access
SMTP mail server's IP address.
                                             smtpServerIpStatus 1.3.6.1.4.1.259.8.1.11.1.19.7.4.1.2 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                                     smtpDestEMailTable 1.3.6.1.4.1.259.8.1.11.1.19.7.5 no-access
The table of the destination e-mail address. The maximum numbers of destination email address to be added is 5.
                                         smtpDestEMailEntry 1.3.6.1.4.1.259.8.1.11.1.19.7.5.1 no-access
A conceptual row of the smtpDestEMailTable.
                                             smtpDestEMail 1.3.6.1.4.1.259.8.1.11.1.19.7.5.1.1 displaystring no-access
SMTP destination e-mail address.
                                             smtpDestEMailStatus 1.3.6.1.4.1.259.8.1.11.1.19.7.5.1.2 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                           lineMgt 1.3.6.1.4.1.259.8.1.11.1.20
                                 consoleMgt 1.3.6.1.4.1.259.8.1.11.1.20.1
                                     consoleDataBits 1.3.6.1.4.1.259.8.1.11.1.20.1.1 integer read-write
Number of data bits. Enumeration: 'databits8': 2, 'databits7': 1.
                                     consoleParity 1.3.6.1.4.1.259.8.1.11.1.20.1.2 integer read-write
Defines the generation of a parity bit. Enumeration: 'partyEven': 2, 'partyOdd': 3, 'partyNone': 1.
                                     consoleBaudRate 1.3.6.1.4.1.259.8.1.11.1.20.1.3 integer read-write
Baud rate: Valid values are 115200, 57600, 38400, 19200, and 9600. Enumeration: 'baudRate57600': 4, 'baudRate19200': 2, 'baudRate38400': 3, 'baudRate9600': 1, 'baudRate115200': 5.
                                     consoleStopBits 1.3.6.1.4.1.259.8.1.11.1.20.1.4 integer read-write
The console stop bits, valid values are stopbits1(1) or stopbits2(2) Enumeration: 'stopbits1': 1, 'stopbits2': 2.
                                     consoleExecTimeout 1.3.6.1.4.1.259.8.1.11.1.20.1.5 integer32 read-write
In a serial console, use the consoleExecTimeout variable to set the interval that the EXEC command interpreter waits until user input is detected; set the value to 0 to disable it.
                                     consolePasswordThreshold 1.3.6.1.4.1.259.8.1.11.1.20.1.6 integer32 read-write
The number of failed console logon attempts that may be made before the system will not accept a further attempt in the time specified by consoleSilentTime. A value of 0 disables the functionality.
                                     consoleSilentTime 1.3.6.1.4.1.259.8.1.11.1.20.1.7 integer32 read-write
The length of time that the management console is inaccessible after the number of failed logon attempts has reached consolePasswordThreshold. A value of 0 disables the functionality.
                                     consoleLoginResponseTimeout 1.3.6.1.4.1.259.8.1.11.1.20.1.10 integer32 read-write
Console login response timeout setting.
                                 telnetMgt 1.3.6.1.4.1.259.8.1.11.1.20.2
                                     telnetStatus 1.3.6.1.4.1.259.8.1.11.1.20.2.4 enabledstatus read-write
To enable or disable the telnet function. Any new telnet request will be rejected and all current telnet sessions will be terminated if this status is set to disabled(2).
                                     telnetPortNumber 1.3.6.1.4.1.259.8.1.11.1.20.2.5 integer32 read-write
The telnet session port number.
                                 vtyMgt 1.3.6.1.4.1.259.8.1.11.1.20.3
                                     vtyExecTimeout 1.3.6.1.4.1.259.8.1.11.1.20.3.1 integer32 read-write
Specifies the interval that the system waits for user input before terminating the current session.
                                     vtyPasswordThreshold 1.3.6.1.4.1.259.8.1.11.1.20.3.2 integer32 read-write
The number of failed logon attempts that may be made before the system will not accept a further attempt to log on. Setting to 0 means disabled.
                                     vtyLoginResponseTimeout 1.3.6.1.4.1.259.8.1.11.1.20.3.3 integer32 read-write
Login response timeout setting.
                                     vtyMaxSession 1.3.6.1.4.1.259.8.1.11.1.20.3.4 integer32 read-write
The maximum number of allowed sessions.
                                     vtySilentTime 1.3.6.1.4.1.259.8.1.11.1.20.3.5 integer32 read-write
The time the system waits before etablishing a new session after the number of failed logins reaches the specified limit. Setting to 0 means disabled.
                           sysTimeMgt 1.3.6.1.4.1.259.8.1.11.1.23
                                 sntpMgt 1.3.6.1.4.1.259.8.1.11.1.23.1
                                     sntpStatus 1.3.6.1.4.1.259.8.1.11.1.23.1.1 enabledstatus read-write
Set enabled(1) to enable the SNTP, set disabled(2) to disable the SNTP.
                                     sntpServiceMode 1.3.6.1.4.1.259.8.1.11.1.23.1.2 integer read-only
Service mode. Enumeration: 'unicast': 1.
                                     sntpPollInterval 1.3.6.1.4.1.259.8.1.11.1.23.1.3 integer32 read-write
Polling interval.
                                     sntpServerTable 1.3.6.1.4.1.259.8.1.11.1.23.1.4 no-access
Table for SNTP servers. IP addresses must occupy contiguous indexes, starting from 1. If a removed entry is not the last entry, the table will be shifted to contiguous indexes automatically.
                                         sntpServerEntry 1.3.6.1.4.1.259.8.1.11.1.23.1.4.1 no-access
Entry for SNTP servers.
                                             sntpServerIndex 1.3.6.1.4.1.259.8.1.11.1.23.1.4.1.1 integer32 no-access
The index of a server.
                                             sntpServerInetAddressType 1.3.6.1.4.1.259.8.1.11.1.23.1.4.1.4 inetaddresstype read-write
Indicates the type of address denoted in sntpServerInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported.
                                             sntpServerInetAddress 1.3.6.1.4.1.259.8.1.11.1.23.1.4.1.5 inetaddress read-write
The IP address of a time server.
                                             sntpServerStatus 1.3.6.1.4.1.259.8.1.11.1.23.1.4.1.6 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                                 sysCurrentTime 1.3.6.1.4.1.259.8.1.11.1.23.2 displaystring read-write
This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A single-digit day is preceded by a space. 'hh:mm:ss' is a 24-hour representations of hours, minutes, and seconds. A single-digit hour is preceded by a zero. 'yyyy' is a four-digit year. An example is: 'Jan 1 02:03:04 2002'.
                                 sysTimeZone 1.3.6.1.4.1.259.8.1.11.1.23.3 displaystring read-write
This is a text string in the following form: '[s]hh:mm'. '[s]' is a plus-or-minus sign. For UTC, this is omitted. For a positive offset, this is '+'. For a negative offset, this is '-'. 'hh:mm' in the hour and minute offset from UTC. A single-digit hour is preceded by a zero. When sysTimeZonePredefined object is set to any value other than none(1), this object will be empty string.
                                 sysTimeZoneName 1.3.6.1.4.1.259.8.1.11.1.23.4 displaystring read-write
The name of the time zone. When sysTimeZonePredefined object is set to any value other than none(1), this object will be empty string.
                                 ntpMgt 1.3.6.1.4.1.259.8.1.11.1.23.5
                                     ntpStatus 1.3.6.1.4.1.259.8.1.11.1.23.5.1 enabledstatus read-write
Set enabled(1) to enable the NTP, set disabled(2) to disable the NTP.
                                     ntpServiceMode 1.3.6.1.4.1.259.8.1.11.1.23.5.2 integer read-only
Service mode. Enumeration: 'unicast': 1.
                                     ntpPollInterval 1.3.6.1.4.1.259.8.1.11.1.23.5.3 integer32 read-only
Polling interval in seconds.
                                     ntpAuthenticateStatus 1.3.6.1.4.1.259.8.1.11.1.23.5.4 enabledstatus read-write
Set enabled(1) to enable the NTP Authenticate, set disabled(2) to disable the NTP.
                                     ntpServerTable 1.3.6.1.4.1.259.8.1.11.1.23.5.5 no-access
Table for NTP servers
                                         ntpServerEntry 1.3.6.1.4.1.259.8.1.11.1.23.5.5.1 no-access
Entry for NTP servers.
                                             ntpServerIpAddress 1.3.6.1.4.1.259.8.1.11.1.23.5.5.1.1 ipaddress no-access
The IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index is 0.
                                             ntpServerVersion 1.3.6.1.4.1.259.8.1.11.1.23.5.5.1.2 integer32 read-only
NTP version.
                                             ntpServerKeyId 1.3.6.1.4.1.259.8.1.11.1.23.5.5.1.3 integer32 read-write
Key for a NTP server. This variable can only be written.
                                             ntpServerStatus 1.3.6.1.4.1.259.8.1.11.1.23.5.5.1.4 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                                     ntpAuthKeyTable 1.3.6.1.4.1.259.8.1.11.1.23.5.6 no-access
Table for NTP Authentication keys
                                         ntpAuthKeyEntry 1.3.6.1.4.1.259.8.1.11.1.23.5.6.1 no-access
Entry for NTP Authentication keys.
                                             ntpAuthKeyId 1.3.6.1.4.1.259.8.1.11.1.23.5.6.1.1 integer32 no-access
The index of a Authentication key. This table has fixed size.
                                             ntpAuthKeyWord 1.3.6.1.4.1.259.8.1.11.1.23.5.6.1.2 octet string read-only
The Authentication key word is used to created a key by the MD5 And the max length is 32.
                                             ntpAuthKeyStatus 1.3.6.1.4.1.259.8.1.11.1.23.5.6.1.3 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                           fileMgt 1.3.6.1.4.1.259.8.1.11.1.24
                                 fileCopyMgt 1.3.6.1.4.1.259.8.1.11.1.24.1
                                     fileCopySrcOperType 1.3.6.1.4.1.259.8.1.11.1.24.1.1 integer read-write
fileCopySrcOperType specifies where to copy from, and fileCopyDestOperType specifies where to copy to. Possible combinations of 'fileCopySrcOperType to fileCopyDestOperType' and required parameters are listed in the following table. --------------+------------------+--------------------------------- Source | Destination | Required parameters --------------+------------------+--------------------------------- file(1) | file(1) | fileCopySrcFileName | | fileCopyDestFileName +------------------+--------------------------------- | runningCfg(2) | fileCopySrcFileName +------------------+--------------------------------- | startUpCfg(3) | fileCopySrcFileName | | fileCopyDestFileName +------------------+--------------------------------- | tftp(4) | fileCopySrcFileName | | fileCopyDestFileName | | fileCopyFileType | | fileCopyServerInetAddressType | | fileCopyServerInetAddress +------------------+--------------------------------- | unit(5) | fileCopySrcFileName | | fileCopyDestFileName | | fileCopyFileType | | fileCopyUnitId +------------------+--------------------------------- | ftp(7) | fileCopySrcFileName | | fileCopyDestFileName | | fileCopyFileType | | fileCopyServerInetAddressType | | fileCopyServerInetAddress | | fileCopyServerUserName | | fileCopyServerPassword --------------+------------------+--------------------------------- runningCfg(2) | file(1) | fileCopyDestFileName +------------------+--------------------------------- | startUpCfg(3) | fileCopyDestFileName +------------------+--------------------------------- | tftp(4) | fileCopyDestFileName | | fileCopyServerInetAddressType | | fileCopyServerInetAddress +------------------+--------------------------------- | ftp(7) | fileCopyDestFileName | | fileCopyServerInetAddressType | | fileCopyServerInetAddress | | fileCopyServerUserName | | fileCopyServerPassword --------------+------------------+--------------------------------- startUpCfg(3) | file(1) | fileCopyDestFileName +------------------+--------------------------------- | runningCfg(2) | None. +------------------+--------------------------------- | tftp(4) | fileCopyDestFileName | | fileCopyServerInetAddressType | | fileCopyServerInetAddress +------------------+--------------------------------- | ftp(7) | fileCopyDestFileName | | fileCopyServerInetAddressType | | fileCopyServerInetAddress | | fileCopyServerUserName | | fileCopyServerPassword --------------+------------------+--------------------------------- tftp(4) | file(1) | fileCopySrcFileName | | fileCopyDestFileName | | fileCopyFileType | | fileCopyServerInetAddressType | | fileCopyServerInetAddress +------------------+--------------------------------- | runningCfg(2) | fileCopySrcFileName | | fileCopyServerInetAddressType | | fileCopyServerInetAddress +------------------+--------------------------------- | startUpCfg(3) | fileCopySrcFileName | | fileCopyDestFileName | | fileCopyServerInetAddressType | | fileCopyServerInetAddress +------------------+--------------------------------- | addRunningCfg(15)| fileCopySrcFileName | | fileCopyServerInetAddressType | | fileCopyServerInetAddress --------------+------------------+--------------------------------- unit(5) | file(1) | fileCopySrcFileName | | fileCopyDestFileName | | fileCopyFileType | | fileCopyUnitId --------------+------------------+--------------------------------- ftp(7) | file(1) | fileCopySrcFileName | | fileCopyDestFileName | | fileCopyFileType | | fileCopyServerInetAddressType | | fileCopyServerInetAddress | | fileCopyServerUserName | | fileCopyServerPassword +------------------+--------------------------------- | runningCfg(2) | fileCopySrcFileName | | fileCopyServerInetAddressType | | fileCopyServerInetAddress | | fileCopyServerUserName | | fileCopyServerPassword +------------------+--------------------------------- | startUpCfg(3) | fileCopySrcFileName | | fileCopyDestFileName | | fileCopyServerInetAddressType | | fileCopyServerInetAddress | | fileCopyServerUserName | | fileCopyServerPassword +------------------+--------------------------------- | addRunningCfg(15)| fileCopySrcFileName | | fileCopyServerInetAddressType | | fileCopyServerInetAddress | | fileCopyServerUserName | | fileCopyServerPassword --------------+------------------+--------------------------------- Enumeration: 'ftp': 7, 'http': 6, 'startUpCfg': 3, 'file': 1, 'tftp': 4, 'runningCfg': 2, 'unit': 5.
                                     fileCopySrcFileName 1.3.6.1.4.1.259.8.1.11.1.24.1.2 displaystring read-write
The source file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has been specified. Note: If the fileCopySrcOperType is runningCfg(2) or startUpCfg(3), this variable can be ignored.
                                     fileCopyDestOperType 1.3.6.1.4.1.259.8.1.11.1.24.1.3 integer read-write
See the description for fileCopySrcOperType. Enumeration: 'ftp': 7, 'http': 6, 'startUpCfg': 3, 'addRunningCfg': 15, 'file': 1, 'tftp': 4, 'runningCfg': 2, 'unit': 5.
                                     fileCopyDestFileName 1.3.6.1.4.1.259.8.1.11.1.24.1.4 displaystring read-write
The destination file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has been specified. Note: If the fileCopyDestOperType is runningCfg(2) or startupCfg(3), this variable can be ignored.
                                     fileCopyFileType 1.3.6.1.4.1.259.8.1.11.1.24.1.5 integer read-write
Type of file to copy in fileCopyMgt. opcode(1) indicates operation code, config(2) indicates configuration file, bootRom(3) indicates diagnostic image file and loader(5) indicates loader image file. If the fileCopySrcOperType or fileCopyDestOperType is either runningCfg(2) or startupCfg(3), this variable can be ignored. bootRom(3) and loader(5) can be set only when the fileCopySrcOperType is tftp(4) and fileCopyDestOperType is file(1). Enumeration: 'opcode': 1, 'bootRom': 3, 'config': 2, 'loader': 5.
                                     fileCopyUnitId 1.3.6.1.4.1.259.8.1.11.1.24.1.7 integer32 read-write
Specifies the switch unit for stackable devices. When performing the 'copy unit file' or 'copy file unit' action, if neither fileCopySrcOperType nor fileCopyDestOperType is unit(5), this variable can be ignored.
                                     fileCopyAction 1.3.6.1.4.1.259.8.1.11.1.24.1.8 integer read-write
Setting this object to copy(2) to begin the copy operation. When the device is not copying, this object will have a value of notCopying(1). Enumeration: 'notCopying': 1, 'copy': 2.
                                     fileCopyStatus 1.3.6.1.4.1.259.8.1.11.1.24.1.9 integer read-only
The status of the last copy procedure, if any. This object will have a value of fileCopyUnknown(18) if no copy operation has been performed. The listed values are identical to fileAutoDownloadResultStatus. Enumeration: 'fileCopyConnectError': 44, 'fileCopyWriteFlashFinish': 26, 'fileCopyTftpNoSuchUser': 8, 'fileCopyTftpSocketBindError': 13, 'fileCopyTftpSocketOpenError': 12, 'fileCopyTftpAccessViolation': 3, 'fileCopyDataConnectionOpenError': 46, 'fileCopyBusy': 17, 'fileCopyServerNotAcceptProvidedCiphers': 49, 'fileCopyTftpSendError': 10, 'fileCopyWriteFlashError': 27, 'fileCopyTftpCompleted': 15, 'fileCopyImageTypeError': 23, 'fileCopyHeaderChecksumError': 24, 'fileCopyServerNotSupportFtps': 50, 'fileCopyUnknown': 18, 'fileCopyLogInError': 47, 'fileCopyTftpUndefError': 1, 'fileCopyParaError': 16, 'fileCopyTftpUnkownTransferId': 6, 'fileCopySameVersion': 56, 'fileCopyServerNotInService': 45, 'fileCopyReadFileError': 19, 'fileCopyFileUnavailable': 51, 'fileCopyFileNotFound': 41, 'fileCopyUnclassifiedError': 52, 'fileCopyTimeout': 53, 'fileCopyTftpUserCancel': 14, 'fileCopyTftpTimeout': 9, 'fileCopyFileNumExceed': 55, 'fileCopyInvalidFileName': 48, 'fileCopyWriteFlashProgramming': 28, 'fileCopyServerPermissionDenied': 42, 'fileCopyTftpReceiverError': 11, 'fileCopyTftpFileNotFound': 2, 'fileCopyTftpIllegalOperation': 5, 'fileCopyCompleted': 31, 'fileCopyStorageFull': 43, 'fileCopySuccess': 30, 'fileCopyTftpDiskFull': 4, 'fileCopyMagicWordError': 22, 'fileCopyImageChecksumError': 25, 'fileCopyFileSizeExceed': 21, 'fileCopyError': 29, 'fileCopyProjectIdError': 54, 'fileCopyTftpFileExisted': 7, 'fileCopySetStartupError': 20.
                                     fileCopyServerInetAddressType 1.3.6.1.4.1.259.8.1.11.1.24.1.20 inetaddresstype read-write
Internet address type of the remote server. Only ipv4(1) type is supported.
                                     fileCopyServerInetAddress 1.3.6.1.4.1.259.8.1.11.1.24.1.21 inetaddress read-write
Internet address of the remote server.
                                     fileCopyServerUserName 1.3.6.1.4.1.259.8.1.11.1.24.1.22 displaystring read-write
Login user name for the remote server. When this variable is empty, the system will use 'anonymous' as user name to log in to the remote server.
                                     fileCopyServerPassword 1.3.6.1.4.1.259.8.1.11.1.24.1.23 displaystring read-write
Login password for the remote server. This variable can only be written. When this variable is read, it always returns a zero-length string.
                                 fileInfoMgt 1.3.6.1.4.1.259.8.1.11.1.24.2
                                     fileInfoTable 1.3.6.1.4.1.259.8.1.11.1.24.2.1 no-access
This table contain the information of the file system; we can also perform the delete, set startup file operation.
                                         fileInfoEntry 1.3.6.1.4.1.259.8.1.11.1.24.2.1.1 no-access
A conceptually row for fileInfoTable.
                                             fileInfoUnitID 1.3.6.1.4.1.259.8.1.11.1.24.2.1.1.1 integer32 no-access
The switch unit in a stacking system, in a non-stacking system, this value is always 1.
                                             fileInfoFileName 1.3.6.1.4.1.259.8.1.11.1.24.2.1.1.2 displaystring no-access
The file Name of the file System in the device.
                                             fileInfoFileType 1.3.6.1.4.1.259.8.1.11.1.24.2.1.1.3 integer read-only
The file type of the file System in the device. Enumeration: 'certificate': 8, 'postlog': 6, 'diag': 1, 'private': 7, 'syslog': 3, 'webarchive': 9, 'cmdlog': 4, 'runtime': 2, 'config': 5.
                                             fileInfoIsStartUp 1.3.6.1.4.1.259.8.1.11.1.24.2.1.1.4 truthvalue read-write
This flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is a invalid operation.
                                             fileInfoFileSize 1.3.6.1.4.1.259.8.1.11.1.24.2.1.1.5 integer32 read-only
The sizes( in bytes) of the file.
                                             fileInfoCreationTime 1.3.6.1.4.1.259.8.1.11.1.24.2.1.1.6 displaystring read-only
The creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A single-digit day is preceded by a space. 'hh:mm:ss' is a 24-hour representations of hours, minutes, and seconds. A single-digit hour is preceded by a zero. 'yyyy' is the four-digit year. An example is: 'Jan 1 02:03:04 2002'.
                                             fileInfoDelete 1.3.6.1.4.1.259.8.1.11.1.24.2.1.1.7 integer read-write
Write this object to delete(2) to delete a file, when read, this always return noDelete(1). Enumeration: 'noDelete': 1, 'delete': 2.
                                 fileAutoDownloadResultTable 1.3.6.1.4.1.259.8.1.11.1.24.3 no-access
This table contains file auto download result information.
                                     fileAutoDownloadResultEntry 1.3.6.1.4.1.259.8.1.11.1.24.3.1 no-access
A conceptual row for fileAutoDownloadResultTable.
                                         fileAutoDownloadResultUnitID 1.3.6.1.4.1.259.8.1.11.1.24.3.1.1 integer32 no-access
The switch unit in a stacking system, in a non-stacking system, this value is always 1.
                                         fileAutoDownloadResultAction 1.3.6.1.4.1.259.8.1.11.1.24.3.1.2 integer read-only
The status of the auto download action. value copying(2) will be obtained if the auto download action is currently processing, or value notCopying(1) will be obtained if no auto download action is currently processing. You can check the download result through the fileAutoDownloadResultStatus object after the download action has finished. Please note that this object is read-only, since the auto download action is triggered automatically by the system when an image file or a config file is set as startup setting through the fileInfoIsStartUp, restartOpCodeFile or restartConfigFile objects, but not set by the user manually through this fileAutoDownloadResultAction object. Enumeration: 'notCopying': 1, 'copying': 2.
                                         fileAutoDownloadResultStatus 1.3.6.1.4.1.259.8.1.11.1.24.3.1.3 integer read-only
The last auto download result status. value fileCopyUnknown(18) will be obtained if no download action has been performed before. The listed values are identical to fileCopyStatus. Enumeration: 'fileCopyConnectError': 44, 'fileCopyWriteFlashFinish': 26, 'fileCopyTftpNoSuchUser': 8, 'fileCopyTftpSocketBindError': 13, 'fileCopyTftpSocketOpenError': 12, 'fileCopyTftpAccessViolation': 3, 'fileCopyDataConnectionOpenError': 46, 'fileCopyBusy': 17, 'fileCopyServerNotAcceptProvidedCiphers': 49, 'fileCopyTftpSendError': 10, 'fileCopyWriteFlashError': 27, 'fileCopyTftpCompleted': 15, 'fileCopyImageTypeError': 23, 'fileCopyHeaderChecksumError': 24, 'fileCopyServerNotSupportFtps': 50, 'fileCopyUnknown': 18, 'fileCopyLogInError': 47, 'fileCopyTftpUndefError': 1, 'fileCopyParaError': 16, 'fileCopyTftpUnkownTransferId': 6, 'fileCopySameVersion': 56, 'fileCopyServerNotInService': 45, 'fileCopyReadFileError': 19, 'fileCopyFileUnavailable': 51, 'fileCopyFileNotFound': 41, 'fileCopyUnclassifiedError': 52, 'fileCopyTimeout': 53, 'fileCopyTftpUserCancel': 14, 'fileCopyTftpTimeout': 9, 'fileCopyFileNumExceed': 55, 'fileCopyInvalidFileName': 48, 'fileCopyWriteFlashProgramming': 28, 'fileCopyServerPermissionDenied': 42, 'fileCopyTftpReceiverError': 11, 'fileCopyTftpFileNotFound': 2, 'fileCopyTftpIllegalOperation': 5, 'fileCopyCompleted': 31, 'fileCopyStorageFull': 43, 'fileCopySuccess': 30, 'fileCopyTftpDiskFull': 4, 'fileCopyMagicWordError': 22, 'fileCopyImageChecksumError': 25, 'fileCopyFileSizeExceed': 21, 'fileCopyError': 29, 'fileCopyProjectIdError': 54, 'fileCopyTftpFileExisted': 7, 'fileCopySetStartupError': 20.
                                 fileAutoUpgradeMgt 1.3.6.1.4.1.259.8.1.11.1.24.4
                                     fileAutoUpgradeOpCodeStatus 1.3.6.1.4.1.259.8.1.11.1.24.4.1 enabledstatus read-write
Set this variable to enabled(1) to enable the device to automatically upgrade the current software image when a new version is detected. Set this variable to disabled(2) to disable this feature.
                                     fileAutoUpgradeOpCodePath 1.3.6.1.4.1.259.8.1.11.1.24.4.2 displaystring read-write
The URL (Universal Resource Location) of the image file location for automatic upgrades. The URL schema can be set to TFTP. The Hostname is the IP address of the server. The last character of the URL is always a '/' and the filename must not be included in the URL.
                                     fileAutoUpgradeOpCodeFileName 1.3.6.1.4.1.259.8.1.11.1.24.4.3 displaystring read-only
The file name of the image file.
                           dnsMgt 1.3.6.1.4.1.259.8.1.11.1.26
                                 dnsDomainLookup 1.3.6.1.4.1.259.8.1.11.1.26.1 enabledstatus read-write
To enable the IP Domain Naming System (DNS)-based host name-to-address translation.
                                 dnsDomainName 1.3.6.1.4.1.259.8.1.11.1.26.2 displaystring read-write
To define a default domain name to complete unqualified host names (names without a dotted-decimal domain name).
                                 dnsCacheTable 1.3.6.1.4.1.259.8.1.11.1.26.7 no-access
To display the RRs in DNS cache.
                                     dnsCacheEntry 1.3.6.1.4.1.259.8.1.11.1.26.7.1 no-access
A conceptual row for the dnsCacheTable.
                                         dnsCacheIndex 1.3.6.1.4.1.259.8.1.11.1.26.7.1.1 integer32 no-access
The entry sequence number.
                                         dnsCacheFlag 1.3.6.1.4.1.259.8.1.11.1.26.7.1.2 integer32 read-only
Always get 4, means this record is unreliable.
                                         dnsCacheType 1.3.6.1.4.1.259.8.1.11.1.26.7.1.3 integer read-only
Cache Type: address(1); cname(2). Enumeration: 'cname': 2, 'address': 1.
                                         dnsCacheTtl 1.3.6.1.4.1.259.8.1.11.1.26.7.1.5 integer32 read-only
The DNS cache TTL.
                                         dnsCacheDomain 1.3.6.1.4.1.259.8.1.11.1.26.7.1.6 displaystring read-only
The DNS cache domain.
                                         dnsCacheInetAddressType 1.3.6.1.4.1.259.8.1.11.1.26.7.1.7 inetaddresstype read-only
Indicates the type of address denoted in dnsHostAddrInetAddress type. Only ipv4(1) and ipv6(2) types are supported.
                                         dnsCacheInetAddress 1.3.6.1.4.1.259.8.1.11.1.26.7.1.8 inetaddress read-only
IP address of DNS cache item.
                                 dnsHostTable 1.3.6.1.4.1.259.8.1.11.1.26.8 no-access
The conceptual table of dnsHostEntry. The dnsHostTable and dnsHostAddrTable are used to define static host name-to-address mapping.
                                     dnsHostEntry 1.3.6.1.4.1.259.8.1.11.1.26.8.1 no-access
A conceptual row for the dnsHostTable.
                                         dnsHostIndex 1.3.6.1.4.1.259.8.1.11.1.26.8.1.1 integer32 no-access
The entry sequence number.
                                         dnsHostName 1.3.6.1.4.1.259.8.1.11.1.26.8.1.2 displaystring read-only
Host name.
                                         dnsHostStatus 1.3.6.1.4.1.259.8.1.11.1.26.8.1.3 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                                 dnsHostAddrTable 1.3.6.1.4.1.259.8.1.11.1.26.9 no-access
The conceptual table of dnsHostAddrEntry. The dnsHostTable and dnsHostAddrTable are used to define static host name-to-address mapping.
                                     dnsHostAddrEntry 1.3.6.1.4.1.259.8.1.11.1.26.9.1 no-access
A conceptual row for the dnsHostAddrTable.
                                         dnsHostAddrInetAddressType 1.3.6.1.4.1.259.8.1.11.1.26.9.1.1 inetaddresstype no-access
Indicates the type of address denoted in dnsHostAddrInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) type are supported.
                                         dnsHostAddrInetAddress 1.3.6.1.4.1.259.8.1.11.1.26.9.1.2 inetaddress no-access
Specifies the address of the host. Adding one address to two different hosts is not allowed.
                                         dnsHostAddrStatus 1.3.6.1.4.1.259.8.1.11.1.26.9.1.3 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                                 dnsDomainListTable 1.3.6.1.4.1.259.8.1.11.1.26.10 no-access
This table defines a list of default domain names to complete unqualified host names.
                                       dnsDomainListEntry 1.3.6.1.4.1.259.8.1.11.1.26.10.1 no-access
A conceptual row for the dnsDomainListTable.
                                           dnsDomainListIndex 1.3.6.1.4.1.259.8.1.11.1.26.10.1.1 integer32 no-access
The entry sequence number.
                                           dnsDomainListName 1.3.6.1.4.1.259.8.1.11.1.26.10.1.2 displaystring read-only
Domain name.
                                           dnsDomainListStatus 1.3.6.1.4.1.259.8.1.11.1.26.10.1.3 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                                 dnsNameServerInetTable 1.3.6.1.4.1.259.8.1.11.1.26.11 no-access
Specifies the address of one or more name servers to use for name and address resolution.
                                       dnsNameServerInetEntry 1.3.6.1.4.1.259.8.1.11.1.26.11.1 no-access
A conceptual row for dnsNameServerInetTable.
                                           dnsNameServerInetAddressType 1.3.6.1.4.1.259.8.1.11.1.26.11.1.1 inetaddresstype no-access
Type of address. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported.
                                           dnsNameServerInetAddress 1.3.6.1.4.1.259.8.1.11.1.26.11.1.2 inetaddress no-access
IP address of name server.
                                           dnsNameServerInetStatus 1.3.6.1.4.1.259.8.1.11.1.26.11.1.3 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                           stormMgt 1.3.6.1.4.1.259.8.1.11.1.33
                                 mcastStormMgt 1.3.6.1.4.1.259.8.1.11.1.33.1
                                     mcastStormTable 1.3.6.1.4.1.259.8.1.11.1.33.1.1 no-access
Table to manage the control of multicast storms for ports.
                                         mcastStormEntry 1.3.6.1.4.1.259.8.1.11.1.33.1.1.1 no-access
The conceptual row of multiStormTable.
                                             mcastStormIfIndex 1.3.6.1.4.1.259.8.1.11.1.33.1.1.1.1 interfaceindex no-access
The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                             mcastStormStatus 1.3.6.1.4.1.259.8.1.11.1.33.1.1.1.2 enabledstatus read-write
Whether multicast storm protection is enabled.
                                             mcastStormOctetRate 1.3.6.1.4.1.259.8.1.11.1.33.1.1.1.5 integer32 read-write
Multicast storm threshold as kilobit per second. If this entry is for a trunk, this is the value for each member port. The range is 64 to 1000000.
                                 bcastStormMgt 1.3.6.1.4.1.259.8.1.11.1.33.3
                                     bcastStormTable 1.3.6.1.4.1.259.8.1.11.1.33.3.1 no-access
Table to manage the control of broadcast storms for ports.
                                         bcastStormEntry 1.3.6.1.4.1.259.8.1.11.1.33.3.1.1 no-access
The conceptual row of bcastStormTable.
                                             bcastStormIfIndex 1.3.6.1.4.1.259.8.1.11.1.33.3.1.1.1 interfaceindex no-access
The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                             bcastStormStatus 1.3.6.1.4.1.259.8.1.11.1.33.3.1.1.2 enabledstatus read-write
Whether broadcast storm protection is enabled.
                                             bcastStormOctetRate 1.3.6.1.4.1.259.8.1.11.1.33.3.1.1.5 integer32 read-write
Broadcast storm threshold as kilobit per second. If this entry is for a trunk, this is the value for each member port. The range is 64 to 1000000.
                                 unknownUcastStormMgt 1.3.6.1.4.1.259.8.1.11.1.33.4
                                     unknownUcastStormTable 1.3.6.1.4.1.259.8.1.11.1.33.4.1 no-access
Table to manage the unknown unicast storm control.
                                         unknownUcastStormEntry 1.3.6.1.4.1.259.8.1.11.1.33.4.1.1 no-access
The conceptual row of unknownUcastStormTable.
                                             unknownUcastStormIfIndex 1.3.6.1.4.1.259.8.1.11.1.33.4.1.1.1 interfaceindex no-access
The port or trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                             unknownUcastStormStatus 1.3.6.1.4.1.259.8.1.11.1.33.4.1.1.2 enabledstatus read-write
The parameter indicates that the unknown unicast storm protection is enabled/disabled.
                                             unknownUcastStormOctetRate 1.3.6.1.4.1.259.8.1.11.1.33.4.1.1.5 integer32 read-write
The parameter indicates the packet rate(kilobit per second) of the storm protection. The range is 64 to 1000000.
                                 atcMgt 1.3.6.1.4.1.259.8.1.11.1.33.5
                                     atcBcastStormTcApplyTime 1.3.6.1.4.1.259.8.1.11.1.33.5.1 integer32 read-write
The parameter indicates the timing when the ATC (Auto Traffic Control) is activated after the broadcast traffic being detected as the storm.
                                     atcBcastStormTcReleaseTime 1.3.6.1.4.1.259.8.1.11.1.33.5.2 integer32 read-write
The parameter indicates the timing when the ATC is released after the broadcast traffic being detected as no storm.
                                     atcBcastStormTable 1.3.6.1.4.1.259.8.1.11.1.33.5.3 no-access
The table contains the Auto Traffic Control configuration and the status for broadcast traffic.
                                         atcBcastStormEntry 1.3.6.1.4.1.259.8.1.11.1.33.5.3.1 no-access
The conceptual row of the table.
                                             atcBcastStormIfIndex 1.3.6.1.4.1.259.8.1.11.1.33.5.3.1.1 interfaceindex no-access
The specified port on which the ATC is applied.
                                             atcBcastStormEnable 1.3.6.1.4.1.259.8.1.11.1.33.5.3.1.2 enabledstatus read-write
The parameter indicates whether the ATC of the broadcast traffic is applied.
                                             atcBcastStormAutoRelease 1.3.6.1.4.1.259.8.1.11.1.33.5.3.1.3 enabledstatus read-write
The parameter indicates whether the Auto-Release feature of ATC is applied.
                                             atcBcastStormSampleType 1.3.6.1.4.1.259.8.1.11.1.33.5.3.1.4 integer read-write
The parameter indicates the unit of traffic rate and threshold. Enumeration: 'packet-rate': 1, 'octet-rate': 2, 'percent': 3.
                                             atcBcastStormCurrentTrafficRate 1.3.6.1.4.1.259.8.1.11.1.33.5.3.1.5 integer32 read-only
The parameter indicates the current broadcast traffic rate.
                                             atcBcastStormAlarmFireThreshold 1.3.6.1.4.1.259.8.1.11.1.33.5.3.1.6 integer32 read-write
The parameter indicates that if the current broadcast traffic rate exceeds the specified threshold, it will be treated as the storm.
                                             atcBcastStormAlarmClearThreshold 1.3.6.1.4.1.259.8.1.11.1.33.5.3.1.7 integer32 read-write
The parameter indicates that if the current broadcast traffic falls below the specified threshold it will be treated as the normal traffic.
                                             atcBcastStormTcAction 1.3.6.1.4.1.259.8.1.11.1.33.5.3.1.8 integer read-write
The parameter indicates the protecting action which ATC will applied to the specified port. Enumeration: 'rate-control': 1, 'shutdown': 2.
                                             atcBcastStormAlarmFireTrapStatus 1.3.6.1.4.1.259.8.1.11.1.33.5.3.1.9 enabledstatus read-write
The parameter indicates whether the trap has to be sent when the broadcast storm has been detected.
                                             atcBcastStormAlarmClearTrapStatus 1.3.6.1.4.1.259.8.1.11.1.33.5.3.1.10 enabledstatus read-write
The parameter indicates whether the trap has to be sent when the broadcast storm has been detected as the normal traffic.
                                             atcBcastStormTcApplyTrapStatus 1.3.6.1.4.1.259.8.1.11.1.33.5.3.1.11 enabledstatus read-write
The parameter indicates whether the trap has to be sent when the ATC is activated.
                                             atcBcastStormTcReleaseTrapStatus 1.3.6.1.4.1.259.8.1.11.1.33.5.3.1.12 enabledstatus read-write
The parameter indicates whether the trap has to be sent when the ATC is released.
                                     atcMcastStormTcApplyTime 1.3.6.1.4.1.259.8.1.11.1.33.5.4 integer read-write
The parameter indicates the timing when the ATC (Auto Traffic Control) is activated after the broadcast traffic being detected as the storm.
                                     atcMcastStormTcReleaseTime 1.3.6.1.4.1.259.8.1.11.1.33.5.5 integer read-write
The parameter indicates the timing when the ATC is released after the broadcast traffic being detected as no storm.
                                     atcMcastStormTable 1.3.6.1.4.1.259.8.1.11.1.33.5.6 no-access
The table contains the Auto Traffic Control configuration and the status for mulicast traffic.
                                         atcMcastStormEntry 1.3.6.1.4.1.259.8.1.11.1.33.5.6.1 no-access
The conceptual row of the table.
                                             atcMcastStormIfIndex 1.3.6.1.4.1.259.8.1.11.1.33.5.6.1.1 interfaceindex no-access
The specified port on which the ATC is applied.
                                             atcMcastStormEnable 1.3.6.1.4.1.259.8.1.11.1.33.5.6.1.2 enabledstatus read-write
The parameter indicates whether the ATC of the mulicast traffic is applied.
                                             atcMcastStormAutoRelease 1.3.6.1.4.1.259.8.1.11.1.33.5.6.1.3 enabledstatus read-write
The parameter indicates whether the Auto-Release feature of ATC is applied.
                                             atcMcastStormSampleType 1.3.6.1.4.1.259.8.1.11.1.33.5.6.1.4 integer read-write
The parameter indicates the unit of traffic rate and threshold. Enumeration: 'packet-rate': 1, 'octet-rate': 2, 'percent': 3.
                                             atcMcastStormCurrentTrafficRate 1.3.6.1.4.1.259.8.1.11.1.33.5.6.1.5 integer32 read-only
The parameter indicates the current mulicast traffic rate.
                                             atcMcastStormAlarmFireThreshold 1.3.6.1.4.1.259.8.1.11.1.33.5.6.1.6 integer32 read-write
The parameter indicates that if the current mulicast traffic rate exceeds the specified threshold, it will be treated as the storm.
                                             atcMcastStormAlarmClearThreshold 1.3.6.1.4.1.259.8.1.11.1.33.5.6.1.7 integer32 read-write
The parameter indicates that if the current mulicast traffic falls below the specified threshold it will be treated as the normal traffic.
                                             atcMcastStormTcAction 1.3.6.1.4.1.259.8.1.11.1.33.5.6.1.8 integer read-write
The parameter indicates the protecting action which ATC will applied to the specified port. Enumeration: 'rate-control': 1, 'shutdown': 2.
                                             atcMcastStormAlarmFireTrapStatus 1.3.6.1.4.1.259.8.1.11.1.33.5.6.1.9 enabledstatus read-write
The parameter indicates whether the trap has to be sent when the mulicast storm has been detected.
                                             atcMcastStormAlarmClearTrapStatus 1.3.6.1.4.1.259.8.1.11.1.33.5.6.1.10 enabledstatus read-write
The parameter indicates whether the trap has to be sent when the mulicast storm has been detected as the normal traffic.
                                             atcMcastStormTcApplyTrapStatus 1.3.6.1.4.1.259.8.1.11.1.33.5.6.1.11 enabledstatus read-write
The parameter indicates whether the trap has to be sent when the ATC is activated.
                                             atcMcastStormTcReleaseTrapStatus 1.3.6.1.4.1.259.8.1.11.1.33.5.6.1.12 enabledstatus read-write
The parameter indicates whether the trap has to be sent when the ATC is released.
                           sysResourceMgt 1.3.6.1.4.1.259.8.1.11.1.39
                                 cpuStatus 1.3.6.1.4.1.259.8.1.11.1.39.2
                                     cpuCurrentUti 1.3.6.1.4.1.259.8.1.11.1.39.2.1 integer32 read-only
The current CPU utilization in percent in the past 5 seconds.
                                     cpuStatMaxUti 1.3.6.1.4.1.259.8.1.11.1.39.2.2 integer32 read-only
The maximum CPU utilization in percent in the past 60 seconds.
                                     cpuStatAvgUti 1.3.6.1.4.1.259.8.1.11.1.39.2.3 integer32 read-only
The average CPU utilization in percent in the past 60 seconds.
                                     cpuPeakTime 1.3.6.1.4.1.259.8.1.11.1.39.2.4 displaystring read-only
The time when the CPU utilization reaches cpuUtiRisingThreshold in the format of 'Mmm _d hh:mm:ss yyyy' as defined in sysCurrentTime of this MIB.
                                     cpuPeakDuration 1.3.6.1.4.1.259.8.1.11.1.39.2.5 integer32 read-only
The duration from the CPU utilization reaches cpuUtiRisingThreshold to reaches cpuUtiFallingThreshold, in seconds.
                                     cpuUtiRisingThreshold 1.3.6.1.4.1.259.8.1.11.1.39.2.6 integer32 read-write
The rising threshold of the cpu utilization.
                                     cpuUtiFallingThreshold 1.3.6.1.4.1.259.8.1.11.1.39.2.7 integer32 read-write
The falling threshold of the cpu utilization.
                                 memoryStatus 1.3.6.1.4.1.259.8.1.11.1.39.3
                                     memoryTotal 1.3.6.1.4.1.259.8.1.11.1.39.3.1 integer32 read-only
The total amount of the memory in kilobytes.
                                     memoryAllocated 1.3.6.1.4.1.259.8.1.11.1.39.3.2 integer32 read-only
The amount of the memory allocated in kilobytes.
                                     memoryFreed 1.3.6.1.4.1.259.8.1.11.1.39.3.3 integer32 read-only
The amount of the free memory in kilobytes.
                                     memoryFreedInPercent 1.3.6.1.4.1.259.8.1.11.1.39.3.4 integer32 read-only
the memory freed in proportion to the total memory.
                                     memoryUtiRisingThreshold 1.3.6.1.4.1.259.8.1.11.1.39.3.5 integer32 read-write
The rising threshold of the memory utilization.
                                     memoryUtiFallingThreshold 1.3.6.1.4.1.259.8.1.11.1.39.3.6 integer32 read-write
The falling threshold of the memory utilization.
                                 taskCpuTable 1.3.6.1.4.1.259.8.1.11.1.39.4 no-access
Table of descriptive and status information describing the CPU utilization of each task.
                                     taskCpuEntry 1.3.6.1.4.1.259.8.1.11.1.39.4.1 no-access
An entry in the table, describing the CPU utilization of one task.
                                         taskCpuName 1.3.6.1.4.1.259.8.1.11.1.39.4.1.1 displaystring no-access
The name of the task.
                                         taskCpuCurrentUti 1.3.6.1.4.1.259.8.1.11.1.39.4.1.2 integer32 read-only
The current CPU utilization in hundredths of a percent in the past 5 seconds.
                                         taskCpuStatMaxUti 1.3.6.1.4.1.259.8.1.11.1.39.4.1.3 integer32 read-only
The maximum CPU utilization in hundredths of a percent in the past 60 seconds.
                                         taskCpuStatAvgUti 1.3.6.1.4.1.259.8.1.11.1.39.4.1.4 integer32 read-only
The average CPU utilization in hundredths of a percent in the past 60 seconds.
                                 cpuGuard 1.3.6.1.4.1.259.8.1.11.1.39.5
                                     cpuGuardStatus 1.3.6.1.4.1.259.8.1.11.1.39.5.1 enabledstatus read-write
The CPU guard status.
                                     cpuGuardHighWatermark 1.3.6.1.4.1.259.8.1.11.1.39.5.2 integer32 read-write
The CPU guard high-watermark.
                                     cpuGuardLowWatermark 1.3.6.1.4.1.259.8.1.11.1.39.5.3 integer32 read-write
The CPU guard low-watermark.
                                     cpuGuardMaxThreshold 1.3.6.1.4.1.259.8.1.11.1.39.5.4 integer32 read-write
The CPU guard maximum threshold.
                                     cpuGuardMinThreshold 1.3.6.1.4.1.259.8.1.11.1.39.5.5 integer32 read-write
The CPU guard minimum threshold.
                                     cpuGuardTrapStatus 1.3.6.1.4.1.259.8.1.11.1.39.5.6 enabledstatus read-write
The CPU guard trap status.
                                     cpuGuardCurrentThreshold 1.3.6.1.4.1.259.8.1.11.1.39.5.7 integer32 read-only
The current CPU guard threshold.
                           mvrMgt 1.3.6.1.4.1.259.8.1.11.1.44
                                 mvrForwardingPriority 1.3.6.1.4.1.259.8.1.11.1.44.18 integer32 read-write
Configure MVR multicast stream forwarding priority. If value is 65535, it means the priority is disabled.
                                 mvrDomainTable 1.3.6.1.4.1.259.8.1.11.1.44.20 no-access
The table for configuring the MVR port.
                                       mvrDomainEntry 1.3.6.1.4.1.259.8.1.11.1.44.20.1 no-access
The entry for configuring the MVR Domain.
                                           mvrDomainId 1.3.6.1.4.1.259.8.1.11.1.44.20.1.1 integer32 no-access
Speicfies which MVR domain to configure.
                                           mvrDomainStatus 1.3.6.1.4.1.259.8.1.11.1.44.20.1.2 enabledstatus read-write
Parameter to enable or disable MVR(Multicast VLAN Registration) on the device.
                                           mvrDomainRunningStatus 1.3.6.1.4.1.259.8.1.11.1.44.20.1.3 integer read-only
Describes the running status of MVR (Multicast VLAN Registration) to the switch. A value of active(1) indicates that all necessary conditions in the MVR environment are satisfied. A value of inactive(2) indicates that some necessary conditions in the MVR environment are not satisfied. Enumeration: 'active': 1, 'inactive': 2.
                                           mvrDomainVlanId 1.3.6.1.4.1.259.8.1.11.1.44.20.1.4 vlanindex read-write
To set VLAN for MVR.The VLAN identified by a particular value of this index is the same VLAN as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
                                           mvrDomainUpstreamSourceIp 1.3.6.1.4.1.259.8.1.11.1.44.20.1.5 ipaddress read-write
Set the source IP address which MVR will carry in IP header when send IGMP packet to upstream router through MVR source port.
                                           mvrDomainClearDynamicGroups 1.3.6.1.4.1.259.8.1.11.1.44.20.1.6 truthvalue read-write
Clear dynamic learned groups
                                 mvrDomainPortTable 1.3.6.1.4.1.259.8.1.11.1.44.21 no-access
The table for configuring the MVR port.
                                       mvrDomainPortEntry 1.3.6.1.4.1.259.8.1.11.1.44.21.1 no-access
The entry for configuring the MVR port.
                                           mvrPortDomainId 1.3.6.1.4.1.259.8.1.11.1.44.21.1.1 integer32 no-access
Speicfies which MVR domain to configure.
                                           mvrDomainIfIndex 1.3.6.1.4.1.259.8.1.11.1.44.21.1.2 interfaceindex no-access
The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                           mvrDomainPortType 1.3.6.1.4.1.259.8.1.11.1.44.21.1.3 integer read-write
For configuring the MVR port type. To disable the MVR port type, use the none(0). Enumeration: 'source': 1, 'none': 0, 'receiver': 2.
                                           mvrDomainPortImmediateLeave 1.3.6.1.4.1.259.8.1.11.1.44.21.1.4 enabledstatus read-write
To enable immediate leave on MVR port.
                                           mvrDomainPortActive 1.3.6.1.4.1.259.8.1.11.1.44.21.1.5 integer read-only
To indicate if the port is associated with the MVR group. If the port is the MVR receiver port or the MVR source port in MVR vlan, the status is active(1); otherwise the status is inactive(2). Enumeration: 'active': 1, 'inactive': 2.
                                           mvrDomainPortImmediateLeaveByHostIp 1.3.6.1.4.1.259.8.1.11.1.44.21.1.6 enabledstatus read-write
To enable immediate leave by host IP on MVR port.
                                 mvrProfileTable 1.3.6.1.4.1.259.8.1.11.1.44.22
                                       mvrProfileCtlTable 1.3.6.1.4.1.259.8.1.11.1.44.22.1 no-access
The entry for configuring the MVR profile.
                                           mvrProfileCtlEntry 1.3.6.1.4.1.259.8.1.11.1.44.22.1.1 no-access
The entry for configuring the MVR profile.
                                               mvrProfileCtlId 1.3.6.1.4.1.259.8.1.11.1.44.22.1.1.1 integer32 no-access
Profile ID to index which MVR profile
                                               mvrProfileName 1.3.6.1.4.1.259.8.1.11.1.44.22.1.1.2 octet string read-write
MVR Profile name which identify a group range. NOTE: All mvrProfileCtlEntry use the same buffer to temply store the mvrProfileName before mvrProfileCtlAction really creat the profile.
                                               mvrProfileCtlAction 1.3.6.1.4.1.259.8.1.11.1.44.22.1.1.5 integer read-write
Set this object to create(2) to create profile. Set this object to destory(3) to delete profile. When the action is complete, this object becomes noAction(1). Enumeration: 'create': 1, 'noAction': 0, 'destory': 2.
                                       mvrProfileGroupCtlTable 1.3.6.1.4.1.259.8.1.11.1.44.22.2 no-access
The entry for configuring the MVR group ranges for MVR profile.
                                           mvrProfileGroupCtlEntry 1.3.6.1.4.1.259.8.1.11.1.44.22.2.1 no-access
The entry for configuring the group ranges on MVR profile.
                                               mvrProfileGropuCtlProfileId 1.3.6.1.4.1.259.8.1.11.1.44.22.2.1.1 integer32 no-access
Profile ID to index which MVR profile
                                               mvrProfileGroupCtlId 1.3.6.1.4.1.259.8.1.11.1.44.22.2.1.2 integer32 no-access
Profile ID to index which group range in MVR profile
                                               mvrProfileGroupStartIPAddress 1.3.6.1.4.1.259.8.1.11.1.44.22.2.1.3 ipaddress read-write
MVR Profile range start IP address. NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileStartIPAddress before mvrProfileGroupCtlAction really creat the group rang on profile.
                                               mvrProfileGroupEndIPAddress 1.3.6.1.4.1.259.8.1.11.1.44.22.2.1.4 ipaddress read-write
MVR Profile range end IP address. NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileEndIPAddress before mvrProfileGroupCtlAction really creat the group rang on profile.
                                               mvrProfileGroupCtlAction 1.3.6.1.4.1.259.8.1.11.1.44.22.2.1.5 integer read-write
Set this object to create(2) to create group range. Set this object to destory(3) to delete group range. When the action is complete, this object becomes noAction(1). NOTE: If mvrProfileGroupStartIPAddress and mvrProfileGroupEndIPAddress pattern already exist on other mvrProfileGroupCtlId, it won't be stored. Enumeration: 'create': 1, 'noAction': 0, 'destory': 2.
                                 mvrDomainAssociatedProfileTable 1.3.6.1.4.1.259.8.1.11.1.44.23 no-access
Configure MVR domain associate which MVR profile
                                       mvrDomainAssociatedProfileEntry 1.3.6.1.4.1.259.8.1.11.1.44.23.1 no-access
The entry for configuring MVR domain associate MVR profile.
                                           mvrProfileDomainId 1.3.6.1.4.1.259.8.1.11.1.44.23.1.1 integer32 no-access
Profile ID to index which MVR profile
                                           mvrProfileId 1.3.6.1.4.1.259.8.1.11.1.44.23.1.2 integer32 no-access
Profile ID to index which MVR profile
                                           mvrProfileAction 1.3.6.1.4.1.259.8.1.11.1.44.23.1.3 integer read-write
Set this object to create(1) to associate profile. Set this object to destory(2) to deassociate profile. When the action is complete, this object becomes noAction(0). Enumeration: 'create': 1, 'noAction': 0, 'destory': 2.
                                 mvrDomainGroupStaticTable 1.3.6.1.4.1.259.8.1.11.1.44.24 no-access
The table for configuring the static members of the MVR group.
                                       mvrDomainGroupStaticEntry 1.3.6.1.4.1.259.8.1.11.1.44.24.1 no-access
The entry for configuring the static members of the MVR group.
                                           mvrGroupStaticDomainId 1.3.6.1.4.1.259.8.1.11.1.44.24.1.1 integer32 no-access
Profile ID to index which MVR profile
                                           mvrDomainGroupStaticAddress 1.3.6.1.4.1.259.8.1.11.1.44.24.1.2 ipaddress no-access
The multicast address of the MVR group.
                                           mvrDomainGroupStaticReceiverVlan 1.3.6.1.4.1.259.8.1.11.1.44.24.1.3 integer32 no-access
The receiver vlan of this MVR group
                                           mvrDomainGroupStaticPorts 1.3.6.1.4.1.259.8.1.11.1.44.24.1.4 portlist read-write
The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group.
                                 mvrDomainGroupCurrentTable 1.3.6.1.4.1.259.8.1.11.1.44.25 no-access
The table for the current members of the MVR group.
                                       mvrDomainGroupCurrentEntry 1.3.6.1.4.1.259.8.1.11.1.44.25.1 no-access
The entry for the current members of the MVR group.
                                           mvrGroupCurrenDomainId 1.3.6.1.4.1.259.8.1.11.1.44.25.1.1 integer32 no-access
Profile ID to index which MVR profile
                                           mvrDomainGroupCurrentAddress 1.3.6.1.4.1.259.8.1.11.1.44.25.1.2 ipaddress no-access
The multicast address of the MVR group.
                                           mvrDomainGroupCurrentReceiverVlan 1.3.6.1.4.1.259.8.1.11.1.44.25.1.3 integer32 no-access
This object indicates the receiver VLAN of the MVR group.
                                           mvrDomainGroupCurrentPorts 1.3.6.1.4.1.259.8.1.11.1.44.25.1.4 portlist read-only
The complete set of ports currently associated with this MVR group.
                                 mvrProxySwitching 1.3.6.1.4.1.259.8.1.11.1.44.27 enabledstatus read-write
Parameter to enable or disable MVR(Multicast VLAN Registration) proxy switching ability on the device.
                                 mvrRobustnessValue 1.3.6.1.4.1.259.8.1.11.1.44.28 integer32 read-write
Paremete to set IGMP robustness value. This value apply to proxy-switching for how many IGMP report/leave will be send out from source port, and how many g-s query will be send on receiver port.
                                 mvrProxyQueryInterval 1.3.6.1.4.1.259.8.1.11.1.44.29 integer32 read-write
Set the query interval that active receiver port will use to send out general query
                                 mvrSourcePortmode 1.3.6.1.4.1.259.8.1.11.1.44.30 integer read-write
Paremete to set MVR Source Port forward mode. When set dynamic, MVR source port won't forward multicast streams received from other source port. When set forward, MVR source port will forward multicast streams received from other source port. These multicast stream all are in MVR group range. Enumeration: 'forward': 2, 'dynamic': 1.
                                 mvrPortStatisticsTable 1.3.6.1.4.1.259.8.1.11.1.44.32 no-access
Table of service per port.
                                       mvrPortStatisticsEntry 1.3.6.1.4.1.259.8.1.11.1.44.32.1 no-access
Entry of service per port.
                                           mvrPortStatisticsDomainId 1.3.6.1.4.1.259.8.1.11.1.44.32.1.1 integer32 no-access
MVR domain ID.
                                           mvrPortStatisticsPortIndex 1.3.6.1.4.1.259.8.1.11.1.44.32.1.2 interfaceindex no-access
The port and the trunk (excluding trunk members) interface of the mvrPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                           mvrPortStatisticsNumGroups 1.3.6.1.4.1.259.8.1.11.1.44.32.1.3 unsigned32 read-only
Current learned groups
                                           mvrPortStatisticsNumJoinSend 1.3.6.1.4.1.259.8.1.11.1.44.32.1.4 unsigned32 read-only
Number of join send
                                           mvrPortStatisticsNumJoins 1.3.6.1.4.1.259.8.1.11.1.44.32.1.5 unsigned32 read-only
Number of join recieved
                                           mvrPortStatisticsNumJoinSuccess 1.3.6.1.4.1.259.8.1.11.1.44.32.1.6 unsigned32 read-only
Number of join group success
                                           mvrPortStatisticsNumLeavesSend 1.3.6.1.4.1.259.8.1.11.1.44.32.1.7 unsigned32 read-only
Number of leave send
                                           mvrPortStatisticsNumLeaves 1.3.6.1.4.1.259.8.1.11.1.44.32.1.8 unsigned32 read-only
Number of leave received
                                           mvrPortStatisticsNumGeneralQuerySend 1.3.6.1.4.1.259.8.1.11.1.44.32.1.9 unsigned32 read-only
Number of general query send.
                                           mvrPortStatisticsNumGeneralQueryRecevied 1.3.6.1.4.1.259.8.1.11.1.44.32.1.10 unsigned32 read-only
Number of general query received.
                                           mvrPortStatisticsNumSepcificQuerySend 1.3.6.1.4.1.259.8.1.11.1.44.32.1.11 unsigned32 read-only
Number of specific query send.
                                           mvrPortStatisticsNumSpecificQueryReceived 1.3.6.1.4.1.259.8.1.11.1.44.32.1.12 unsigned32 read-only
Number of specific query received.
                                           mvrPortStatisticsNumInvalidReport 1.3.6.1.4.1.259.8.1.11.1.44.32.1.13 unsigned32 read-only
Number of invalid report received.
                                           mvrPortStatisticsClearStatistics 1.3.6.1.4.1.259.8.1.11.1.44.32.1.14 truthvalue read-write
Clear this VLAN all statistics
                                 mvrVlanStatisticsTable 1.3.6.1.4.1.259.8.1.11.1.44.33 no-access
Table of Mvr statistics VLAN.
                                       mvrVlanStatisticsEntry 1.3.6.1.4.1.259.8.1.11.1.44.33.1 no-access
Entry of Mvr statistics VLAN.
                                           mvrVlanStatisticsDomainId 1.3.6.1.4.1.259.8.1.11.1.44.33.1.1 integer32 no-access
VLAN ID
                                           mvrVlanStatisticsVlanId 1.3.6.1.4.1.259.8.1.11.1.44.33.1.2 vlanindex no-access
VLAN ID
                                           mvrVlanStatisticsNumGroups 1.3.6.1.4.1.259.8.1.11.1.44.33.1.3 unsigned32 read-only
Current learned groups
                                           mvrVlanStatisticsNumJoinSend 1.3.6.1.4.1.259.8.1.11.1.44.33.1.4 unsigned32 read-only
Number of join send.
                                           mvrVlanStatisticsNumJoins 1.3.6.1.4.1.259.8.1.11.1.44.33.1.5 unsigned32 read-only
Number of join received
                                           mvrVlanStatisticsNumJoinSuccess 1.3.6.1.4.1.259.8.1.11.1.44.33.1.6 unsigned32 read-only
Number of jion success
                                           mvrVlanStatisticsNumLeavesSend 1.3.6.1.4.1.259.8.1.11.1.44.33.1.7 unsigned32 read-only
Number of leave send.
                                           mvrVlanStatisticsNumLeaves 1.3.6.1.4.1.259.8.1.11.1.44.33.1.8 unsigned32 read-only
Number of leave received
                                           mvrVlanStatisticsNumGeneralQuerySend 1.3.6.1.4.1.259.8.1.11.1.44.33.1.9 unsigned32 read-only
Number of general query send
                                           mvrVlanStatisticsNumGeneralQueryRecevied 1.3.6.1.4.1.259.8.1.11.1.44.33.1.10 unsigned32 read-only
Number of general query received
                                           mvrVlanStatisticsNumSepcificQuerySend 1.3.6.1.4.1.259.8.1.11.1.44.33.1.11 unsigned32 read-only
Number of specific query send
                                           mvrVlanStatisticsNumSpecificQueryReceived 1.3.6.1.4.1.259.8.1.11.1.44.33.1.12 unsigned32 read-only
Number of sepcific query received
                                           mvrVlanStatisticsNumInvalidReport 1.3.6.1.4.1.259.8.1.11.1.44.33.1.13 unsigned32 read-only
Number of invalid report received
                                           mvrVlanStatisticsClearStatistics 1.3.6.1.4.1.259.8.1.11.1.44.33.1.14 truthvalue read-write
Clear this VLAN statistics
                           dhcpSnoopMgt 1.3.6.1.4.1.259.8.1.11.1.46
                                 dhcpSnoopGlobal 1.3.6.1.4.1.259.8.1.11.1.46.1
                                     dhcpSnoopEnable 1.3.6.1.4.1.259.8.1.11.1.46.1.1 enabledstatus read-write
This object indicates whether the DHCP Snooping feature is enabled.
                                     dhcpSnoopVerifyMacAddressEnable 1.3.6.1.4.1.259.8.1.11.1.46.1.2 enabledstatus read-write
This object indicates whether DHCP Snooping Mac address verification is enabled.
                                     dhcpSnoopInformationOptionEnable 1.3.6.1.4.1.259.8.1.11.1.46.1.3 enabledstatus read-write
This object indicates whether the DHCP snooping information option(option 82) feature is enabled.
                                     dhcpSnoopInformationOptionPolicy 1.3.6.1.4.1.259.8.1.11.1.46.1.4 integer read-write
This object indicates which reforwarding policy shall be used for DHCP snooping information option(option 82). A value of drop(1) means to drop the DHCP request packet which has the information option(option 82). A value of keep(2) means to keep the existing information option(option 82) of the DHCP request packet. A value of replace(3), which is the default value, means to replace the existing information option(option 82) of the DHCP request packet. Enumeration: 'keep': 2, 'drop': 1, 'replace': 3.
                                     dhcpSnoopBindingsTableCtlAction 1.3.6.1.4.1.259.8.1.11.1.46.1.5 integer read-write
Set this to store(2) to store DHCP snooping binding entries to flash. Set this to clear(3) to clear DHCP snooping binding entries from flash. noAction(1) will always be obtained when reading this variable. Enumeration: 'clear': 3, 'store': 2, 'noAction': 1.
                                     dhcpSnoopLimitRate 1.3.6.1.4.1.259.8.1.11.1.46.1.6 integer32 read-write
This object indicates the limit rate that DHCP packet redirected to CPU. Set this to 0 means no rate limit for DHCP packet.
                                 dhcpSnoopVlan 1.3.6.1.4.1.259.8.1.11.1.46.2
                                     dhcpSnoopVlanConfigTable 1.3.6.1.4.1.259.8.1.11.1.46.2.1 no-access
A table contains DHCP Snooping configurations of existing VLANs.
                                         dhcpSnoopVlanConfigEntry 1.3.6.1.4.1.259.8.1.11.1.46.2.1.1 no-access
An instance contains the configuration to enable or disable DHCP Snooping at each existing VLAN.
                                             dhcpSnoopVlanIndex 1.3.6.1.4.1.259.8.1.11.1.46.2.1.1.1 vlanindex no-access
This object indicates the VLAN ID on which DHCP Snooping feature is configured.
                                             dhcpSnoopVlanEnable 1.3.6.1.4.1.259.8.1.11.1.46.2.1.1.2 enabledstatus read-write
This object indicates whether DHCP Snooping is enabled in this VLAN.
                                 dhcpSnoopInterface 1.3.6.1.4.1.259.8.1.11.1.46.3
                                     dhcpSnoopPortConfigTable 1.3.6.1.4.1.259.8.1.11.1.46.3.1 no-access
A table provides the mechanism to configure the trust state of each port or trunk for DHCP Snooping purpose.
                                         dhcpSnoopPortConfigEntry 1.3.6.1.4.1.259.8.1.11.1.46.3.1.1 no-access
An instance contains the configuration to enable or disable trust state of each port or trunk for DHCP Snooping purpose.
                                             dhcpSnoopPortIfIndex 1.3.6.1.4.1.259.8.1.11.1.46.3.1.1.1 interfaceindex no-access
The ifIndex value of the port or trunk.
                                             dhcpSnoopPortTrustEnable 1.3.6.1.4.1.259.8.1.11.1.46.3.1.1.2 enabledstatus read-write
This object indicates whether the port or trunk is trusted for DHCP Snooping purpose.
                                 dhcpSnoopBindings 1.3.6.1.4.1.259.8.1.11.1.46.4
                                     dhcpSnoopBindingsTable 1.3.6.1.4.1.259.8.1.11.1.46.4.1 no-access
A table contains the DHCP bindings information learnt by the device.
                                         dhcpSnoopBindingsEntry 1.3.6.1.4.1.259.8.1.11.1.46.4.1.1 no-access
An instance contains the Mac address, IP address type, IP address, VLAN number, interface number, leased time and status.
                                             dhcpSnoopBindingsVlanIndex 1.3.6.1.4.1.259.8.1.11.1.46.4.1.1.1 vlanindex no-access
This object indicates the VLAN which a DHCP client host belongs to.
                                             dhcpSnoopBindingsMacAddress 1.3.6.1.4.1.259.8.1.11.1.46.4.1.1.2 macaddress no-access
This object indicates the MAC address of a DHCP client host.
                                             dhcpSnoopBindingsAddrType 1.3.6.1.4.1.259.8.1.11.1.46.4.1.1.3 inetaddresstype read-only
This object indicates the type of IP address denoted in dhcpSnoopBindingsIpAddress type.
                                             dhcpSnoopBindingsEntryType 1.3.6.1.4.1.259.8.1.11.1.46.4.1.1.4 integer read-only
This object indicates that this binding is obtained from dynamically learning or is a static configuraion. Enumeration: 'dynamic': 1, 'static': 2.
                                             dhcpSnoopBindingsIpAddress 1.3.6.1.4.1.259.8.1.11.1.46.4.1.1.5 ipaddress read-only
This object indicates the allocated IP address of a DHCP client host.
                                             dhcpSnoopBindingsPortIfIndex 1.3.6.1.4.1.259.8.1.11.1.46.4.1.1.6 interfaceindex read-only
This object indicates the port or trunk where a DHCP client host connects to.
                                             dhcpSnoopBindingsLeaseTime 1.3.6.1.4.1.259.8.1.11.1.46.4.1.1.7 unsigned32 read-only
This object indicates the leased time of this DHCP bindings.
                                 dhcpSnoopStatistics 1.3.6.1.4.1.259.8.1.11.1.46.5
                                     dhcpSnoopTotalForwardedPkts 1.3.6.1.4.1.259.8.1.11.1.46.5.1 counter32 read-only
Indicates the total number of packets subjected to DHCP Snooping is forwarded.
                                     dhcpSnoopUntrustedPortDroppedPkts 1.3.6.1.4.1.259.8.1.11.1.46.5.3 counter32 read-only
Indicates the number of packets subjected to DHCP Snooping is dropped because they come from untrusted interface.
                           clusterMgt 1.3.6.1.4.1.259.8.1.11.1.47
                                 clusterEnable 1.3.6.1.4.1.259.8.1.11.1.47.1 enabledstatus read-write
Enables or disables clustering on the device.
                                 clusterCommanderEnable 1.3.6.1.4.1.259.8.1.11.1.47.2 enabledstatus read-write
Enables or disables the device as commander in a cluster.
                                 clusterIpPool 1.3.6.1.4.1.259.8.1.11.1.47.4 ipaddress read-write
The start internal IP address of a cluster pool.
                                 clusterClearCandidateTable 1.3.6.1.4.1.259.8.1.11.1.47.5 integer read-write
Setting this object to clear(2) starts to clear the candidate table. Enumeration: 'clear': 2, 'noClear': 1.
                                 clusterRole 1.3.6.1.4.1.259.8.1.11.1.47.6 integer read-only
The current role of the device in a cluster. commander(1) : The switch is the controlling device in a cluster. candidate(2) : The switch has been discovered by the commander, but it has not been manually configured for access from the commander. activeMember(3): The switch has been manually configured for access from the commander and it is active in the cluster. disabled(5) : The switch has clustering disabled. Enumeration: 'activeMember': 3, 'disabled': 5, 'candidate': 2, 'commander': 1.
                                 clusterMemberCount 1.3.6.1.4.1.259.8.1.11.1.47.7 counter32 read-only
The total number of members in a cluster.
                                 clusterCandidateCount 1.3.6.1.4.1.259.8.1.11.1.47.8 counter32 read-only
The total number of candidates in a cluster.
                                 clusterCandidateTable 1.3.6.1.4.1.259.8.1.11.1.47.9 no-access
A table listing cluster candidates.
                                     clusterCandidateEntry 1.3.6.1.4.1.259.8.1.11.1.47.9.1 no-access
A conceptual row containing the information of the candidate.
                                         clusterCandidateMacAddr 1.3.6.1.4.1.259.8.1.11.1.47.9.1.1 macaddress no-access
The MAC address of the candidate.
                                         clusterCandidateDesc 1.3.6.1.4.1.259.8.1.11.1.47.9.1.3 displaystring read-only
The description of the candidate.
                                         clusterCandidateRole 1.3.6.1.4.1.259.8.1.11.1.47.9.1.4 integer read-only
The role of the candidate. candidate(2) : The switch is discovered by the commander, but it has not been manually configured for access from the commander. activeMember(3) : The switch is manually configured for access from the commander and it is active in the cluster. inactiveMember(4): The switch is manually configured for access from the commander, but it is inactive in the cluster. Enumeration: 'activeMember': 3, 'inactiveMember': 4, 'candidate': 2.
                                 clusterMemberTable 1.3.6.1.4.1.259.8.1.11.1.47.10 no-access
A table listing clustering members.
                                       clusterMemberEntry 1.3.6.1.4.1.259.8.1.11.1.47.10.1 no-access
A conceptual row containing the information of the member.
                                           clusterMemberId 1.3.6.1.4.1.259.8.1.11.1.47.10.1.1 unsigned32 no-access
The ID of the member.
                                           clusterMemberMacAddr 1.3.6.1.4.1.259.8.1.11.1.47.10.1.2 macaddress read-only
The MAC address of the member.
                                           clusterMemberDesc 1.3.6.1.4.1.259.8.1.11.1.47.10.1.3 displaystring read-only
The description of the member.
                                           clusterMemberActive 1.3.6.1.4.1.259.8.1.11.1.47.10.1.4 integer read-only
The active status of the member. activeMember(3) : The switch is manually configured for access from the commander and it is active in the cluster. inactiveMember(4): The switch is manually configured for access from the commander, but it is inactive in the cluster. Enumeration: 'activeMember': 3, 'inactiveMember': 4.
                                 clusterMemberAddCtl 1.3.6.1.4.1.259.8.1.11.1.47.11
                                       clusterMemberAddCtlMacAddr 1.3.6.1.4.1.259.8.1.11.1.47.11.1 macaddress read-write
The MAC address of the device associated with clusterMemberAddCtlAction.
                                       clusterMemberAddCtlId 1.3.6.1.4.1.259.8.1.11.1.47.11.2 unsigned32 read-write
The member id associated with clusterMemberAddCtlAction.
                                       clusterMemberAddCtlAction 1.3.6.1.4.1.259.8.1.11.1.47.11.5 integer read-write
Adds the device to members that can be accessed from the commander. The MAC of the device is the current value of clusterMemberAddCtlMacAddr and the assigned member ID is the current value of clusterMemberAddCtlId. Set this object to add(2) to begin adding the member. Enumeration: 'add': 2, 'noAdd': 1.
                                 clusterMemberRemoveCtl 1.3.6.1.4.1.259.8.1.11.1.47.12
                                       clusterMemberRemoveCtlId 1.3.6.1.4.1.259.8.1.11.1.47.12.1 unsigned32 read-write
The member ID associated with clusterMemberRemoveCtlAction.
                                       clusterMemberRemoveCtlAction 1.3.6.1.4.1.259.8.1.11.1.47.12.2 integer read-write
Removes the device from members that can be accessed from the commander. The member ID is the current value of clusterMemberRemoveCtlId. Set this object to remove(2) to begin removing the member. Enumeration: 'noRemove': 1, 'remove': 2.
                           ipSrcGuardMgt 1.3.6.1.4.1.259.8.1.11.1.48
                                 ipSrcGuardConfigTable 1.3.6.1.4.1.259.8.1.11.1.48.1 no-access
A table contains the configurations to enable or disable IP Source Guard at each port or trunk.
                                     ipSrcGuardConfigEntry 1.3.6.1.4.1.259.8.1.11.1.48.1.1 no-access
An instance contains the configuration to enable or disable IP Source Guard at each port or trunk.
                                         ipSrcGuardPortIfIndex 1.3.6.1.4.1.259.8.1.11.1.48.1.1.1 interfaceindex no-access
This object idents the port or trunk which is capable of IP Source Guard feature.
                                         ipSrcGuardMode 1.3.6.1.4.1.259.8.1.11.1.48.1.1.2 integer read-write
This object indicates whether Ip Source Guard is enabled at this interface. If the value equals 0, it means Ip Source Guard is disabled. If the value equals 1, it means Ip Source Guard is enabled, and packets are filtered by checking source ip. If the value equals 2, it means Ip Source Guard is enabled and packets are filtered by checking source ip and source mac. Enumeration: 'diabled': 0, 'srcIp': 1, 'srcIpMac': 2.
                                         ipSrcGuardTableMode 1.3.6.1.4.1.259.8.1.11.1.48.1.1.3 integer read-write
This object indicates the table mode IP Source Guard select. If the value equals 1, it means IP Source Guard choose ACL mode to filter packet. If the value equals 2, it means IP Source Guard choose MAC mode to filter packet. Enumeration: 'mac': 2, 'acl': 1.
                                         ipSrcGuardAclMaxBinding 1.3.6.1.4.1.259.8.1.11.1.48.1.1.4 integer read-write
This object indicates the maximum binding number in ACL mode. The number of IP Source Guard bindings in ACL mode will be limited by this value.
                                         ipSrcGuardMacMaxBinding 1.3.6.1.4.1.259.8.1.11.1.48.1.1.5 integer read-only
This object indicates the maximum binding numer in MAC mode. The number of IP Source Guard bindings in MAC mode will be limited by this value.
                                 ipSrcGuardAclTable 1.3.6.1.4.1.259.8.1.11.1.48.3 no-access
A table contains the IP Source Guard ACL binding information learned by the device or configured by the user.
                                     ipSrcGuardAclEntry 1.3.6.1.4.1.259.8.1.11.1.48.3.1 no-access
An instance contains the IP address, Mac address, entry type, VLAN number, interface number and status.
                                         ipSrcGuardAclBindingIpAddress 1.3.6.1.4.1.259.8.1.11.1.48.3.1.1 ipaddress no-access
This object indicates the IP address of a ACL binding entry.
                                         ipSrcGuardAclBindingMacAddress 1.3.6.1.4.1.259.8.1.11.1.48.3.1.2 macaddress no-access
This object indicates the MAC address of a ACL binding entry.
                                         ipSrcGuardAclBindingEntryType 1.3.6.1.4.1.259.8.1.11.1.48.3.1.3 integer no-access
This object indicates that this binding is obtained from dynamically learning or is a static configuraion. Enumeration: 'dhcp': 2, 'static': 1, 'bootp': 3.
                                         ipSrcGuardAclBindingVlanIndex 1.3.6.1.4.1.259.8.1.11.1.48.3.1.4 vlanindex read-only
This object indicates the VLAN which a ACL binding belongs to.
                                         ipSrcGuardAclBindingPortIfIndex 1.3.6.1.4.1.259.8.1.11.1.48.3.1.5 interfaceindex read-only
This object indicates the port or trunk where a ACL binding associated.
                                         ipSrcGuardAclBindingStatus 1.3.6.1.4.1.259.8.1.11.1.48.3.1.6 rowstatus read-only
The status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device.
                                 ipSrcGuardMacTable 1.3.6.1.4.1.259.8.1.11.1.48.4 no-access
A table contains the IP Source Guard MAC binding information learned by the device or configured by the user.
                                     ipSrcGuardMacEntry 1.3.6.1.4.1.259.8.1.11.1.48.4.1 no-access
An instance contains the IP address, Mac address, VLAN number, interface number and status.
                                         ipSrcGuardMacBindingMacAddress 1.3.6.1.4.1.259.8.1.11.1.48.4.1.1 macaddress no-access
This object indicates the MAC address of a MAC binding entry.
                                         ipSrcGuardMacBindingIpAddress 1.3.6.1.4.1.259.8.1.11.1.48.4.1.2 ipaddress no-access
This object indicates the IP address of a MAC binding entry.
                                         ipSrcGuardMacBindingStartVlan 1.3.6.1.4.1.259.8.1.11.1.48.4.1.3 integer32 read-only
This object indicates the start VLAN which a MAC binding belongs to.
                                         ipSrcGuardMacBindingEndVlan 1.3.6.1.4.1.259.8.1.11.1.48.4.1.4 integer32 read-only
This object indicates the end VLAN which a MAC binding belongs to.
                                         ipSrcGuardMacBindingPortList 1.3.6.1.4.1.259.8.1.11.1.48.4.1.5 octet string read-only
This object indicates the port or trunk where a MAC binding associated.
                                         ipSrcGuardMacBindingStatus 1.3.6.1.4.1.259.8.1.11.1.48.4.1.6 rowstatus read-only
The status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device.
                           upnpMgt 1.3.6.1.4.1.259.8.1.11.1.49
                                 upnpStatus 1.3.6.1.4.1.259.8.1.11.1.49.1 enabledstatus read-write
Sets enabled(1) to enable UPnP device, and sets disabled(2) to disable UPnP device.
                                 upnpAdvertisingDuration 1.3.6.1.4.1.259.8.1.11.1.49.2 integer32 read-write
The interval(in seconds) between available UPnP device advertising messages sent by the switch.
                                 upnpTtl 1.3.6.1.4.1.259.8.1.11.1.49.3 integer read-write
Specifies the TTL value of the UPnP advertising messages sent by the switch. When the TTL value is greater than 1, it is possible to send UPnP advertising messages to traverse multiple routers; at the same time, the UPnP device will send an IGMP Join message to the traverse multiple routers so that the routers will forward multicast messages to the UPnP device.
                           oamMgt 1.3.6.1.4.1.259.8.1.11.1.52
                                 oamPortClearStatTable 1.3.6.1.4.1.259.8.1.11.1.52.3 no-access
A table contains the information of clear OAM statistics at each port.
                                     oamPortClearStatEntry 1.3.6.1.4.1.259.8.1.11.1.52.3.1 no-access
An entry contains the information of clear OAM statistics at each port.
                                         oamPortClearStatIndex 1.3.6.1.4.1.259.8.1.11.1.52.3.1.1 interfaceindex no-access
This object shows the ifIndex value of the port excluding trunk.
                                         oamClearStatistics 1.3.6.1.4.1.259.8.1.11.1.52.3.1.2 integer read-write
This variable is used to clear the counters for OAM. Set this variable to clear(2) to perform the clear operation, noClear(1) will always be displayed when reading this variable. Enumeration: 'clear': 2, 'noClear': 1.
                                 oamLoopbackTable 1.3.6.1.4.1.259.8.1.11.1.52.4 no-access
Table for OAM remote loopback test.
                                     oamLoopbackEntry 1.3.6.1.4.1.259.8.1.11.1.52.4.1 no-access
Entry for OAM remote loopback test.
                                         oamLoopbackTestIfIndex 1.3.6.1.4.1.259.8.1.11.1.52.4.1.1 interfaceindex no-access
The ifIndex value of the port (excluding trunk and trunk members). The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                         oamLoopbackTestPacketNumber 1.3.6.1.4.1.259.8.1.11.1.52.4.1.2 integer32 read-write
Setting the packet number when performing loopback test.
                                         oamLoopbackTestPacketSize 1.3.6.1.4.1.259.8.1.11.1.52.4.1.3 integer32 read-write
Setting the packet size when performing loopback test.
                                         oamLoopbackTestAction 1.3.6.1.4.1.259.8.1.11.1.52.4.1.4 integer read-write
Setting this object to test(2) to begin the loopback test. This object will be noTest(1) when the loopback test is canceled or the loopback test has finished. Enumeration: 'test': 2, 'noTest': 1.
                                         oamLoopbackTestResultTx 1.3.6.1.4.1.259.8.1.11.1.52.4.1.5 counter32 read-only
A count of the the total number of loopback frames transmitted at last loopback test on this interface.
                                         oamLoopbackTestResultRx 1.3.6.1.4.1.259.8.1.11.1.52.4.1.6 counter32 read-only
A count of the the total number of loopback frames received at last loopback test on this interface.
                                         oamLoopbackTestResultLossRate 1.3.6.1.4.1.259.8.1.11.1.52.4.1.7 integer32 read-only
Packet loss rate of this loopback test operation in hundredths of a percent. This variable is calculated by oamLoopbackTestResultRx and oamLoopbackTestResultTx.
                                 oamPrivateEventLogType 1.3.6.1.4.1.259.8.1.11.1.52.5 integer no-access
This object augments the dot3OamEventLogType of dot3OamEventLogTable in DOT3-OAM-MIB. When the OUI (dot3OamEventLogOui) is 0x0012CF, the following event types are defined: connectionToRemoteDeviceUp(1001), connectionToRemoteDeviceDown(1002), linkFaultClear(1003), dyingGaspEventClear(1004), criticalLinkEventClear(1005) All these events are not threshold crossing events. Enumeration: 'dyingGaspEventClear': 1004, 'connectionToRemoteDeviceUp': 1001, 'connectionToRemoteDeviceDown': 1002, 'linkFaultClear': 1003, 'criticalLinkEventClear': 1005.
                                 oamPortClearEventLogTable 1.3.6.1.4.1.259.8.1.11.1.52.6 no-access
A table containing the information of clear OAM event log at each port.
                                     oamPortClearEventLogEntry 1.3.6.1.4.1.259.8.1.11.1.52.6.1 no-access
An entry containing the information of clear OAM event log at each port.
                                         oamPortClearEventLogIndex 1.3.6.1.4.1.259.8.1.11.1.52.6.1.1 interfaceindex no-access
The ifIndex value of the port (excluding trunk and trunk members). The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                         oamPortClearEventLogAction 1.3.6.1.4.1.259.8.1.11.1.52.6.1.2 integer read-write
This variable is used to clear the event log for OAM. Set this variable to clear(2) to perform the clear operation. noClear(1) will always be displayed when reading this variable. Enumeration: 'clear': 2, 'noClear': 1.
                           mldSnoopMgt 1.3.6.1.4.1.259.8.1.11.1.54
                                 mldSnoopStatus 1.3.6.1.4.1.259.8.1.11.1.54.1 enabledstatus read-write
Parameter to enable or disable MLD snooping on the device. When enabled, the device will examine MLD packets and set up filters for MLD ports.
                                 mldSnoopQuerier 1.3.6.1.4.1.259.8.1.11.1.54.2 enabledstatus read-write
Enables (disables) whether the switch acts as an MLD querier.
                                 mldSnoopRobustness 1.3.6.1.4.1.259.8.1.11.1.54.3 integer32 read-write
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. MLD is robust to (Robustness Variable-1) packet losses. The discussion of the Robustness Variable is in Section 7.1 of RFC 2710.
                                 mldSnoopQueryInterval 1.3.6.1.4.1.259.8.1.11.1.54.4 integer32 read-write
The interval (in seconds) between MLD host-query messages sent by the switch.
                                 mldSnoopQueryMaxResponseTime 1.3.6.1.4.1.259.8.1.11.1.54.5 integer32 read-write
The time after a query, during which a response is expected from an endstation. If a querier has sent a number of queries defined by mldSnoopRobustness, but an endstation has not responded, a countdown timer is started using an initial value set by mldSnoopQueryMaxResponseTime. If the countdown finishes, and the endstation still has not responded, then that the endstation is deemed to have left the multicast group.
                                 mldSnoopRouterPortExpireTime 1.3.6.1.4.1.259.8.1.11.1.54.6 integer32 read-write
Sets the time (in seconds) the switch waits after the previous querier has stopped querying before the router port (which received query packets from previous querier) expires.
                                 mldSnoopVersion 1.3.6.1.4.1.259.8.1.11.1.54.7 integer32 read-write
MLD version snooped
                                 mldSnoopUnknownMcastMode 1.3.6.1.4.1.259.8.1.11.1.54.8 integer read-write
Sets the mldSnoopUnknownMcastMode to define the flooding behavior when receive the unknown multicast traffic. Enumeration: 'flood': 1, 'toRouterPort': 2.
                                 mldSnoopRouterCurrentTable 1.3.6.1.4.1.259.8.1.11.1.54.9 no-access
Table for current router ports.
                                     mldSnoopRouterCurrentEntry 1.3.6.1.4.1.259.8.1.11.1.54.9.1 no-access
Entry for current router ports.
                                         mldSnoopRouterCurrentVlanIndex 1.3.6.1.4.1.259.8.1.11.1.54.9.1.1 unsigned32 no-access
The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopRouterStaticTable.
                                         mldSnoopRouterCurrentPorts 1.3.6.1.4.1.259.8.1.11.1.54.9.1.2 portlist read-only
The set of ports which are current router ports, including static router ports. Please refer to mldSnoopRouterStaticTable.
                                 mldSnoopRouterStaticTable 1.3.6.1.4.1.259.8.1.11.1.54.10 no-access
Table for static router ports.
                                       mldSnoopRouterStaticEntry 1.3.6.1.4.1.259.8.1.11.1.54.10.1 no-access
Entry for static router ports.
                                           mldSnoopRouterStaticVlanIndex 1.3.6.1.4.1.259.8.1.11.1.54.10.1.1 unsigned32 no-access
The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopRouterStaticTable.
                                           mldSnoopRouterStaticPorts 1.3.6.1.4.1.259.8.1.11.1.54.10.1.2 portlist read-only
The set of ports which are static router ports.
                                 mldSnoopMulticastCurrentTable 1.3.6.1.4.1.259.8.1.11.1.54.11 no-access
Table for current multicast addresses.
                                       mldSnoopMulticastCurrentEntry 1.3.6.1.4.1.259.8.1.11.1.54.11.1 no-access
Entry for current multicast addresses.
                                           mldSnoopMulticastCurrentVlanIndex 1.3.6.1.4.1.259.8.1.11.1.54.11.1.1 unsigned32 no-access
The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopMulticastStaticTable.
                                           mldSnoopMulticastCurrentIpAddress 1.3.6.1.4.1.259.8.1.11.1.54.11.1.2 inetaddressipv6 no-access
IPv6 address of multicast group.
                                           mldSnoopMulticastCurrentSourceIpAddress 1.3.6.1.4.1.259.8.1.11.1.54.11.1.3 inetaddressipv6 no-access
IPv6 address of the source.
                                           mldSnoopMulticastCurrentPorts 1.3.6.1.4.1.259.8.1.11.1.54.11.1.4 portlist read-only
The set of ports which are members of a multicast group, including static members. Please refer to mldSnoopMulticastStaticTable.
                                 mldSnoopMulticastStaticTable 1.3.6.1.4.1.259.8.1.11.1.54.12 no-access
Table for static multicast addresses.
                                       mldSnoopMulticastStaticEntry 1.3.6.1.4.1.259.8.1.11.1.54.12.1 no-access
Entry for static multicast addresses.
                                           mldSnoopMulticastStaticVlanIndex 1.3.6.1.4.1.259.8.1.11.1.54.12.1.1 unsigned32 no-access
The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopMulticastStaticTable.
                                           mldSnoopMulticastStaticIpAddress 1.3.6.1.4.1.259.8.1.11.1.54.12.1.2 inetaddressipv6 no-access
IPv6 address of multicast group.
                                           mldSnoopMulticastStaticPorts 1.3.6.1.4.1.259.8.1.11.1.54.12.1.3 portlist read-only
The set of ports which are members.
                                 mldSnoopCurrentVlanTable 1.3.6.1.4.1.259.8.1.11.1.54.13 no-access
Table for configuring MLD snooping for each VLAN which exists in the device by (local or network) management, or dynamically created as a result of GVRP requests received.
                                       mldSnoopCurrentVlanEntry 1.3.6.1.4.1.259.8.1.11.1.54.13.1 no-access
Entry for configuring MLD snooping.
                                           mldSnoopCurrentVlanIndex 1.3.6.1.4.1.259.8.1.11.1.54.13.1.1 unsigned32 no-access
Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface.
                                           mldSnoopCurrentVlanImmediateLeave 1.3.6.1.4.1.259.8.1.11.1.54.13.1.2 enabledstatus read-write
The parameter to enable or disable the Immediate-Leave feature on this VLAN.
                                           mldSnoopCurrentVlanImmediateLeaveByHostIp 1.3.6.1.4.1.259.8.1.11.1.54.13.1.3 enabledstatus read-write
The parameter to enable or disable the Immediate-Leave by-host-ip feature on this VLAN.
                                 mldSnoopProxyReporting 1.3.6.1.4.1.259.8.1.11.1.54.14 enabledstatus read-write
Parameter to enable or disable MLD snooping proxy reporting on the device.
                                 mldSnoopUnsolicitedReportInterval 1.3.6.1.4.1.259.8.1.11.1.54.15 unsigned32 read-write
Setting this value to specify how long (in seconds) the uplink ports should transmit unsolicited reports.
                                 mldSnoopPortTable 1.3.6.1.4.1.259.8.1.11.1.54.16 no-access
Table of MLD Snooping service per port.
                                       mldSnoopPortEntry 1.3.6.1.4.1.259.8.1.11.1.54.16.1 no-access
Entry of MLD Snooping service per port.
                                           mldSnoopPortIndex 1.3.6.1.4.1.259.8.1.11.1.54.16.1.1 unsigned32 no-access
The port and the trunk (excluding trunk members) interface of the mldsnpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                           mldSnoopQueryDrop 1.3.6.1.4.1.259.8.1.11.1.54.16.1.3 integer read-write
Parameter to enable or disable dropping MLD Query packet. Enumeration: 'enable': 1, 'disable': 2.
                                           mldSnoopMulticastDataDrop 1.3.6.1.4.1.259.8.1.11.1.54.16.1.4 integer read-write
Parameter to enable or disable dropping IPv6 multicast data Enumeration: 'enable': 1, 'disable': 2.
                                           mldSnoopPortNumGroups 1.3.6.1.4.1.259.8.1.11.1.54.16.1.5 unsigned32 read-only
Current learned groups
                                           mldSnoopPortNumJoinSend 1.3.6.1.4.1.259.8.1.11.1.54.16.1.6 unsigned32 read-only
Number of join send
                                           mldSnoopPortNumJoins 1.3.6.1.4.1.259.8.1.11.1.54.16.1.7 unsigned32 read-only
Number of join recieved
                                           mldSnoopPortNumJoinSuccess 1.3.6.1.4.1.259.8.1.11.1.54.16.1.8 unsigned32 read-only
Number of join group success
                                           mldSnoopPortNumLeavesSend 1.3.6.1.4.1.259.8.1.11.1.54.16.1.9 unsigned32 read-only
Number of leave send
                                           mldSnoopPortNumLeaves 1.3.6.1.4.1.259.8.1.11.1.54.16.1.10 unsigned32 read-only
Number of leave received
                                           mldSnoopPortNumGeneralQuerySend 1.3.6.1.4.1.259.8.1.11.1.54.16.1.11 unsigned32 read-only
Number of general query send.
                                           mldSnoopPortNumGeneralQueryRecevied 1.3.6.1.4.1.259.8.1.11.1.54.16.1.12 unsigned32 read-only
Number of general query received.
                                           mldSnoopPortNumSepcificQuerySend 1.3.6.1.4.1.259.8.1.11.1.54.16.1.13 unsigned32 read-only
Number of specific query send.
                                           mldsnoopPortNumSpecificQueryReceived 1.3.6.1.4.1.259.8.1.11.1.54.16.1.14 unsigned32 read-only
Number of specific query received.
                                           mldSnoopPortNumInvalidReport 1.3.6.1.4.1.259.8.1.11.1.54.16.1.15 unsigned32 read-only
Number of invalid report received.
                                           mldSnoopPortClearStatistics 1.3.6.1.4.1.259.8.1.11.1.54.16.1.16 truthvalue read-write
Clear this VLAN all statistics
                                 mldSnoopFilterStatus 1.3.6.1.4.1.259.8.1.11.1.54.17 enabledstatus read-write
Parameter to enable or disable MLD filtering on the device.
                                 mldSnoopProfileTable 1.3.6.1.4.1.259.8.1.11.1.54.18 no-access
The table for configuring the MLD snooping profile.
                                       mldSnoopProfileEntry 1.3.6.1.4.1.259.8.1.11.1.54.18.1 no-access
The entry for configuring the MLD snooping profile.
                                           mldSnoopProfileId 1.3.6.1.4.1.259.8.1.11.1.54.18.1.1 unsigned32 no-access
The ID of the MLD snooping profile.
                                           mldSnoopProfileAction 1.3.6.1.4.1.259.8.1.11.1.54.18.1.2 integer read-write
The access mode of the MLD snooping profile. Enumeration: 'deny': 2, 'permit': 1.
                                           mldSnoopProfileStatus 1.3.6.1.4.1.259.8.1.11.1.54.18.1.3 validstatus read-write
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                                 mldSnoopProfileCtl 1.3.6.1.4.1.259.8.1.11.1.54.19
                                       mldSnoopProfileCtlId 1.3.6.1.4.1.259.8.1.11.1.54.19.1 unsigned32 read-write
The ID of the MLD snooping profile. The default value is zero, meaning that no ID is specified. In order to create a profile, a non-zero value must be specified.
                                       mldSnoopProfileCtlInetAddressType 1.3.6.1.4.1.259.8.1.11.1.54.19.2 inetaddresstype read-write
The address type is associated with this agent. Only ipv4(1) type is supported.
                                       mldSnoopProfileCtlStartInetAddress 1.3.6.1.4.1.259.8.1.11.1.54.19.3 inetaddress read-write
The specified addresses in the start of the controlled IP multicast addresses.
                                       mldSnoopProfileCtlEndInetAddress 1.3.6.1.4.1.259.8.1.11.1.54.19.4 inetaddress read-write
The specified addresses in the end of the controlled IP multicast addresses.
                                       mldSnoopProfileCtlAction 1.3.6.1.4.1.259.8.1.11.1.54.19.5 integer read-write
Setting it to create(2) creates the range of the controlled IP multicast addresses. Setting it to destroy(3) destroys the range of the controlled IP multicast addresses. When the action is completed, this object becomes noAction(1). Enumeration: 'destroy': 3, 'create': 2, 'noAction': 1.
                                 mldSnoopProfileRangeTable 1.3.6.1.4.1.259.8.1.11.1.54.20 no-access
The table for configuring the range of the MLD snooping profile.
                                       mldSnoopProfileRangeEntry 1.3.6.1.4.1.259.8.1.11.1.54.20.1 no-access
The entry for configuring the range of the MLD snooping profile.
                                           mldSnoopProfileRangeProfileId 1.3.6.1.4.1.259.8.1.11.1.54.20.1.1 unsigned32 no-access
This is defined as mldSnoopProfileId.
                                           mldSnoopProfileRangeInetAddressType 1.3.6.1.4.1.259.8.1.11.1.54.20.1.2 inetaddresstype no-access
The address type is associated with this agent. Only ipv6(2) type is supported.
                                           mldSnoopProfileRangeStartInetAddress 1.3.6.1.4.1.259.8.1.11.1.54.20.1.3 inetaddress no-access
The specified addresses in the start of the controlled IPv6 multicast addresses.
                                           mldSnoopProfileRangeEndInetAddress 1.3.6.1.4.1.259.8.1.11.1.54.20.1.4 inetaddress no-access
The specified addresses in the end of the controlled IPv6 multicast addresses.
                                           mldSnoopProfileRangeAction 1.3.6.1.4.1.259.8.1.11.1.54.20.1.5 integer read-only
The access mode of the MLD snooping profile. Enumeration: 'deny': 2, 'permit': 1.
                                 mldSnoopFilterPortTable 1.3.6.1.4.1.259.8.1.11.1.54.21 no-access
Table for port configuration in MLD filtering.
                                       mldSnoopFilterPortEntry 1.3.6.1.4.1.259.8.1.11.1.54.21.1 no-access
Entry for port configuration in MLD filtering.
                                           mldSnoopFilterPortIndex 1.3.6.1.4.1.259.8.1.11.1.54.21.1.1 unsigned32 no-access
The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.
                                           mldSnoopFilterPortProfileId 1.3.6.1.4.1.259.8.1.11.1.54.21.1.2 integer32 read-write
The mldSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the mldSnoopProfileId object. If there is no corresponding entry in the mldSnoopProfileTable, then no association exists. In particular, if this value is zero, no associated profile will be generated, as zero is not a valid profile index.
                                 mldSnoopThrottlePortTable 1.3.6.1.4.1.259.8.1.11.1.54.22 no-access
Table for port configuration in MLD throttling.
                                       mldSnoopThrottlePortEntry 1.3.6.1.4.1.259.8.1.11.1.54.22.1 no-access
Entry for port configuration in MLD throttling.
                                           mldSnoopThrottlePortIndex 1.3.6.1.4.1.259.8.1.11.1.54.22.1.1 unsigned32 no-access
The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.
                                           mldSnoopThrottlePortRunningStatus 1.3.6.1.4.1.259.8.1.11.1.54.22.1.2 truthvalue read-only
Describes the running status of the MLD throttling to the switch. A value of true(1) indicates the MLD throttling mechanism is active. A value of false(2) indicates the MLD throttling mechanism is inactive.
                                           mldSnoopThrottlePortAction 1.3.6.1.4.1.259.8.1.11.1.54.22.1.3 integer read-write
The action mode of the MLD throttling. A value of replace(1) means to replace a joined multicast group randomly when an interface receives an MLD report and the number of current joined multicast groups is equal to the maximum number of MLD groups that the interface can join. A value of deny(2) means to deny the MLD report request when an interface receives an MLD report and the number of current joined multicast groups is equal to the maximum number of MLD groups that the interface can join. Enumeration: 'deny': 2, 'replace': 1.
                                           mldSnoopThrottlePortMaxGroups 1.3.6.1.4.1.259.8.1.11.1.54.22.1.4 integer32 read-write
The maximum number of MLD groups that the interface can join.
                                           mldSnoopThrottlePortCurrentGroups 1.3.6.1.4.1.259.8.1.11.1.54.22.1.5 integer32 read-only
The current number of MLD groups that the interface has joined.
                                 mldSnoopClearDynamicGroups 1.3.6.1.4.1.259.8.1.11.1.54.23 truthvalue read-write
The current number of MLD groups that the interface has joined.
                                 mldSnoopVlanTable 1.3.6.1.4.1.259.8.1.11.1.54.24 no-access
Table of MLD Snooping service per port.
                                       mldSnoopVlanEntry 1.3.6.1.4.1.259.8.1.11.1.54.24.1 no-access
Entry of MLD Snooping service per VLAN.
                                           mldSnoopVlanIndex 1.3.6.1.4.1.259.8.1.11.1.54.24.1.1 vlanindex no-access
VLAN ID
                                           mldSnoopVlanNumGroups 1.3.6.1.4.1.259.8.1.11.1.54.24.1.2 unsigned32 read-only
Current learned groups
                                           mldSnoopVlanNumJoinSend 1.3.6.1.4.1.259.8.1.11.1.54.24.1.3 unsigned32 read-only
Number of join send.
                                           mldSnoopVlanNumJoins 1.3.6.1.4.1.259.8.1.11.1.54.24.1.4 unsigned32 read-only
Number of join received
                                           mldSnoopVlanNumJoinSuccess 1.3.6.1.4.1.259.8.1.11.1.54.24.1.5 unsigned32 read-only
Number of jion success
                                           mldSnoopVlanNumLeavesSend 1.3.6.1.4.1.259.8.1.11.1.54.24.1.6 unsigned32 read-only
Number of leave send.
                                           mldSnoopVlanNumLeaves 1.3.6.1.4.1.259.8.1.11.1.54.24.1.7 unsigned32 read-only
Number of leave received
                                           mldSnoopVlanNumGeneralQuerySend 1.3.6.1.4.1.259.8.1.11.1.54.24.1.8 unsigned32 read-only
Number of general query send
                                           mldSnoopVlanNumGeneralQueryRecevied 1.3.6.1.4.1.259.8.1.11.1.54.24.1.9 unsigned32 read-only
Number of general query received
                                           mldSnoopVlanNumSepcificQuerySend 1.3.6.1.4.1.259.8.1.11.1.54.24.1.10 unsigned32 read-only
Number of specific query send
                                           mldsnoopVlanNumSpecificQueryReceived 1.3.6.1.4.1.259.8.1.11.1.54.24.1.11 unsigned32 read-only
Number of sepcific query received
                                           mldSnoopVlanNumInvalidReport 1.3.6.1.4.1.259.8.1.11.1.54.24.1.12 unsigned32 read-only
Number of invalid report received
                                           mldSnoopVlanClearStatistics 1.3.6.1.4.1.259.8.1.11.1.54.24.1.13 truthvalue read-write
Clear this VLAN statistics
                           dynamicArpInspectionMgt 1.3.6.1.4.1.259.8.1.11.1.56
                                 daiGlobal 1.3.6.1.4.1.259.8.1.11.1.56.1
                                     daiGlobalStatus 1.3.6.1.4.1.259.8.1.11.1.56.1.1 enabledstatus read-write
Set enabled(1) to enable dynamic ARP inspection. Set disabled(2) to disable dynamic ARP inspection.
                                     daiGlobalSrcMacValidation 1.3.6.1.4.1.259.8.1.11.1.56.1.2 enabledstatus read-write
Set enabled(1) to enable validation of source MAC address. Set disabled(2) to disable validation of source MAC address.
                                     daiGlobalDestMacValidation 1.3.6.1.4.1.259.8.1.11.1.56.1.3 enabledstatus read-write
Set enabled(1) to enable validation of destination MAC address. Set disabled(2) to disable validation of destination MAC address.
                                     daiGlobalIpAddrValidation 1.3.6.1.4.1.259.8.1.11.1.56.1.4 enabledstatus read-write
Set enabled(1) to enable validation of IP address. Set disabled(2) to disable validation of IP address.
                                     daiGlobalLogNumber 1.3.6.1.4.1.259.8.1.11.1.56.1.5 integer32 read-write
The number of log buffers for saving log message. The value 0 means not generating system messages.
                                     daiGlobalLogInterval 1.3.6.1.4.1.259.8.1.11.1.56.1.6 integer32 read-write
The value of the time interval for saving log messages.
                                     daiGlobalAdditionalValidStatus 1.3.6.1.4.1.259.8.1.11.1.56.1.7 enabledstatus read-only
The vaule of this object is disabled(2) when the status of daiGlobalSrcMacValidation, daiGlobalDestMacValidation, and daiGlobalIpAddrValidation are disabled; enabled(1) when one or more of these variables are enabled.
                                 daiVlan 1.3.6.1.4.1.259.8.1.11.1.56.2
                                     daiVlanTable 1.3.6.1.4.1.259.8.1.11.1.56.2.1 no-access
A table contains dynamic ARP inspection configurations for existing VLANs.
                                         daiVlanEntry 1.3.6.1.4.1.259.8.1.11.1.56.2.1.1 no-access
An instance containing the configuration of dynamic ARP inspection for each existing VLAN.
                                             daiVlanIndex 1.3.6.1.4.1.259.8.1.11.1.56.2.1.1.1 vlanindex no-access
This object indicates the VLAN ID on which dynamic ARP inspection is configured.
                                             daiVlanStatus 1.3.6.1.4.1.259.8.1.11.1.56.2.1.1.2 enabledstatus read-write
This object indicates whether dynamic ARP inspection is enabled in this VLAN.
                                             daiVlanArpAclName 1.3.6.1.4.1.259.8.1.11.1.56.2.1.1.3 displaystring read-write
Specifies the ARP ACL name bound to the interface. The default value of daiVlanArpAclStatus is dynamic(2).
                                             daiVlanArpAclStatus 1.3.6.1.4.1.259.8.1.11.1.56.2.1.1.4 integer read-write
Set to static(1) means packets not matching the ACL are dropped. Set to dynamic(2) means packets not matching the ACL are validated by the DHCP snooping binding table. When daiVlanArpAclName is configured, the default value of daiVlanArpAclStatus is dynamic(2). Enumeration: 'static': 1, 'dynamic': 2.
                                 daiInterface 1.3.6.1.4.1.259.8.1.11.1.56.3
                                     daiPortTable 1.3.6.1.4.1.259.8.1.11.1.56.3.1 no-access
A table containing dynamic ARP inspection configurations for port interfaces.
                                         daiPortEntry 1.3.6.1.4.1.259.8.1.11.1.56.3.1.1 no-access
An instance containing the configuration of dynamic ARP inspection at each port interface.
                                             daiPortIfIndex 1.3.6.1.4.1.259.8.1.11.1.56.3.1.1.1 interfaceindex no-access
The ifIndex value of the port.
                                             daiPortTrustStatus 1.3.6.1.4.1.259.8.1.11.1.56.3.1.1.2 enabledstatus read-write
This object indicates whether the port is trusted for dynamic ARP inspection.
                                             daiPortRateLimit 1.3.6.1.4.1.259.8.1.11.1.56.3.1.1.3 unsigned32 read-write
The value of rate limit threshold per second of disposing ARP messages. Set the value 0xFFFFFFFF as no rate limit.
                                 daiLog 1.3.6.1.4.1.259.8.1.11.1.56.4
                                     daiLogTable 1.3.6.1.4.1.259.8.1.11.1.56.4.1 no-access
A table containing dynamic ARP inspection log information.
                                         daiLogEntry 1.3.6.1.4.1.259.8.1.11.1.56.4.1.1 no-access
An instance containing log information of dynamic ARP inspection at each VLAN interface.
                                             daiLogIndex 1.3.6.1.4.1.259.8.1.11.1.56.4.1.1.1 integer32 no-access
This object indicates the index of dynamic ARP inspection log information.
                                             daiLogVlan 1.3.6.1.4.1.259.8.1.11.1.56.4.1.1.2 vlanindex read-only
This object indicates the VLAN ID of dynamic ARP inspection log information.
                                             daiLogPort 1.3.6.1.4.1.259.8.1.11.1.56.4.1.1.3 interfaceindex read-only
This object indicates the ifIndex of dynamic ARP inspection log information.
                                             daiLogSrcIpAddress 1.3.6.1.4.1.259.8.1.11.1.56.4.1.1.4 ipaddress read-only
The source IP address of dynamic ARP inspection log information.
                                             daiLogDestIpAddress 1.3.6.1.4.1.259.8.1.11.1.56.4.1.1.5 ipaddress read-only
The destination IP address of dynamic ARP inspection log information.
                                             daiLogSrcMacAddress 1.3.6.1.4.1.259.8.1.11.1.56.4.1.1.6 macaddress read-only
The source MAC address of dynamic ARP inspection log information.
                                             daiLogDestMacAddress 1.3.6.1.4.1.259.8.1.11.1.56.4.1.1.7 macaddress read-only
The destination MAC address of dynamic ARP inspection log information.
                                 daiStatistics 1.3.6.1.4.1.259.8.1.11.1.56.5
                                     daiTotalReceivedPkts 1.3.6.1.4.1.259.8.1.11.1.56.5.1 counter32 read-only
Indicates the total number of ARP packets received before rate limiting.
                                     daiTotalDroppedPkts 1.3.6.1.4.1.259.8.1.11.1.56.5.2 counter32 read-only
Indicates the total number of ARP packets dropped due to rate limt.
                                     daiTotalProcessedPkts 1.3.6.1.4.1.259.8.1.11.1.56.5.3 counter32 read-only
Indicates the total number of ARP packets processed by ARP inspection.
                                     daiTotalSrcMacDroppedPkts 1.3.6.1.4.1.259.8.1.11.1.56.5.4 counter32 read-only
Indicates the total number of ARP packets dropped by source MAC address validation.
                                     daiTotalDestMacDroppedPkts 1.3.6.1.4.1.259.8.1.11.1.56.5.5 counter32 read-only
Indicates the total number of ARP packets dropped by destination MAC address validation.
                                     daiTotalIpAddrDroppedPkts 1.3.6.1.4.1.259.8.1.11.1.56.5.6 counter32 read-only
Indicates the total number of ARP packets dropped by IP address validation.
                                     daiTotalArpAclDroppedPkts 1.3.6.1.4.1.259.8.1.11.1.56.5.7 counter32 read-only
Indicates the total number of ARP packets dropped by ARP ACL.
                                     daiTotalDhcpSnoopingDroppedPkts 1.3.6.1.4.1.259.8.1.11.1.56.5.8 counter32 read-only
Indicates the total number of ARP packets dropped by DHCP snooping.
                           pppoeiaMgt 1.3.6.1.4.1.259.8.1.11.1.60
                                 pppoeiaGlobal 1.3.6.1.4.1.259.8.1.11.1.60.1
                                     pppoeiaGlobalStatus 1.3.6.1.4.1.259.8.1.11.1.60.1.1 enabledstatus read-write
Set enabled(1) to enable global status of PPPoE Intermediate Agent. Set disbaled(2) to disable global status of PPPoE Intermediate Agent.
                                     pppoeiaGlobalAccessNodeId 1.3.6.1.4.1.259.8.1.11.1.60.1.2 displaystring read-write
Specifies access node identifier. Use empty to revert to default value.
                                     pppoeiaGlobalOperAccessNodeId 1.3.6.1.4.1.259.8.1.11.1.60.1.3 displaystring read-only
The operational access node identifier.
                                     pppoeiaGlobalGenericErrorMsg 1.3.6.1.4.1.259.8.1.11.1.60.1.4 displaystring read-write
Specifies generic error message. Use empty to revert to default value.
                                     pppoeiaGlobalOperGenericErrorMsg 1.3.6.1.4.1.259.8.1.11.1.60.1.5 displaystring read-only
The operational generic error message.
                                     pppoeiaGlobalClearStatisticsAction 1.3.6.1.4.1.259.8.1.11.1.60.1.6 integer read-write
This variable is used to clear the counters of all interfaces. Set clear(1) to perform the clear operation. The value noClear(2) will always be displayed when reading. Enumeration: 'clear': 1, 'noClear': 2.
                                 pppoeiaPortTable 1.3.6.1.4.1.259.8.1.11.1.60.2 no-access
Table for port configuration in PPPoE Intermediate Agent.
                                     pppoeiaPortEntry 1.3.6.1.4.1.259.8.1.11.1.60.2.1 no-access
Entry for port configuration in PPPoE Intermediate Agent.
                                         pppoeiaPortIndex 1.3.6.1.4.1.259.8.1.11.1.60.2.1.1 interfaceindex no-access
The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                         pppoeiaPortStatus 1.3.6.1.4.1.259.8.1.11.1.60.2.1.2 enabledstatus read-write
This parameter is used to enable/disable PPPoE Intermediate Agent on interfaces.
                                         pppoeiaPortTrustStatus 1.3.6.1.4.1.259.8.1.11.1.60.2.1.3 enabledstatus read-write
This parameter is used to enable/disable trust mode of PPPoE Intermediate Agent on interfaces.
                                         pppoeiaPortVendorTagStrip 1.3.6.1.4.1.259.8.1.11.1.60.2.1.4 enabledstatus read-write
This parameter is used to enable/disable stripping of vendor tag status of PPPoE Intermediate Agent on interfaces.
                                         pppoeiaPortCircuitId 1.3.6.1.4.1.259.8.1.11.1.60.2.1.5 displaystring read-write
Specifies circuit ID of PPPoE Intermediate Agent on interfaces. Use empty to revert to default value.
                                         pppoeiaPortOperCircuitId 1.3.6.1.4.1.259.8.1.11.1.60.2.1.6 displaystring read-only
The operational circuit ID of PPPoE Intermediate Agent on interfaces.
                                         pppoeiaPortRemoteId 1.3.6.1.4.1.259.8.1.11.1.60.2.1.7 displaystring read-write
Specifies remote ID of PPPoE Intermediate Agent on interfaces. Use empty to revert to default value.
                                         pppoeiaPortOperRemoteId 1.3.6.1.4.1.259.8.1.11.1.60.2.1.8 displaystring read-only
The operational remote ID of PPPoE Intermediate Agent on interfaces.
                                 pppoeiaPortStatsTable 1.3.6.1.4.1.259.8.1.11.1.60.3 no-access
Table for port statistics in PPPoE Intermediate Agent.
                                     pppoeiaPortStatsEntry 1.3.6.1.4.1.259.8.1.11.1.60.3.1 no-access
Entry for port statistics in PPPoE Intermediate Agent.
                                         pppoeiaPortStatsIndex 1.3.6.1.4.1.259.8.1.11.1.60.3.1.1 interfaceindex no-access
The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                         pppoeiaPortStatsRecvPkts 1.3.6.1.4.1.259.8.1.11.1.60.3.1.2 counter32 read-only
Indicates the total number of received packets of the interface.
                                         pppoeiaPortStatsRecvPadiPkts 1.3.6.1.4.1.259.8.1.11.1.60.3.1.3 counter32 read-only
Indicates the total number of received PPPoE Active Discovery Initiation packets of the interface.
                                         pppoeiaPortStatsRecvPadoPkts 1.3.6.1.4.1.259.8.1.11.1.60.3.1.4 counter32 read-only
Indicates the total number of received PPPoE Active Discovery Offer packets of the interface.
                                         pppoeiaPortStatsRecvPadrPkts 1.3.6.1.4.1.259.8.1.11.1.60.3.1.5 counter32 read-only
Indicates the total number of received PPPoE Active Discovery Request packets of the interface.
                                         pppoeiaPortStatsRecvPadsPkts 1.3.6.1.4.1.259.8.1.11.1.60.3.1.6 counter32 read-only
Indicates the total number of received PPPoE Active Discovery Session-confirmation packets of the interface.
                                         pppoeiaPortStatsRecvPadtPkts 1.3.6.1.4.1.259.8.1.11.1.60.3.1.7 counter32 read-only
Indicates the total number of received PPPoE Active Discovery Terminate packets of the interface.
                                         pppoeiaPortStatsDropUntrustRespPkts 1.3.6.1.4.1.259.8.1.11.1.60.3.1.8 counter32 read-only
Indicates the total number of response packets dropped because they were untrusted.
                                         pppoeiaPortStatsDropUntrustReqPkts 1.3.6.1.4.1.259.8.1.11.1.60.3.1.9 counter32 read-only
Indicates the total number of request packets dropped because they were untrusted.
                                         pppoeiaPortStatsDropMalformedPkts 1.3.6.1.4.1.259.8.1.11.1.60.3.1.10 counter32 read-only
Indicates the total number of malformed packets dropped because they were untrusted.
                                         pppoeiaPortStatsClearAction 1.3.6.1.4.1.259.8.1.11.1.60.3.1.11 integer read-write
This variable is used to clear the counters of specified interface. Set clear(1) to perform the clear operation. The value noClear(2) will always be displayed when reading. Enumeration: 'clear': 1, 'noClear': 2.
                           erpsMgt 1.3.6.1.4.1.259.8.1.11.1.62
                                 erpsGlobalStatus 1.3.6.1.4.1.259.8.1.11.1.62.1 integer read-write
Configures the ERPS function for an entire switch. Note that the ERPS domain will not take effect unless it becomes active and the global status is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                 erpsDomainTable 1.3.6.1.4.1.259.8.1.11.1.62.2 no-access
Table for ERPS domain configuration.
                                     erpsDomainEntry 1.3.6.1.4.1.259.8.1.11.1.62.2.1 no-access
Entry for ERPS domain configuration.
                                         erpsDomainIndex 1.3.6.1.4.1.259.8.1.11.1.62.2.1.1 integer32 no-access
An index that uniquely identifies an entry in the erpsDomainTable.
                                         erpsDomainName 1.3.6.1.4.1.259.8.1.11.1.62.2.1.2 displaystring read-only
The domain name that uniquely identifies an entry in the erpsDomainTable.
                                         erpsDomainMegLevel 1.3.6.1.4.1.259.8.1.11.1.62.2.1.3 integer read-only
Configures the maintenance entity group (MEG) level which is used to provide a communication channel for ring automatic protection switching (R-APS) information.
                                         erpsDomainNodeId 1.3.6.1.4.1.259.8.1.11.1.62.2.1.4 macaddress read-only
Configures the node id whcih is a MAC address unique to the ring node.
                                         erpsDomainWestRingPort 1.3.6.1.4.1.259.8.1.11.1.62.2.1.5 integer32 read-only
Each node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the west port for the specified domain. The east port and west port can not be configured as the same port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. A value of 0 means no west ring port configured for this domain.
                                         erpsDomainEastRingPort 1.3.6.1.4.1.259.8.1.11.1.62.2.1.6 integer32 read-only
Each node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the east port for the specified domain. The east port and west port can not be configured as the same port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. A value of 0 means no east ring port configured for this domain.
                                         erpsDomainRplPort 1.3.6.1.4.1.259.8.1.11.1.62.2.1.8 integer read-only
This value displays the port for ring protection link which under normal conditions, i.e., without any failure or request, is blocked for traffic channel, to prevent the formation of loops. Enumeration: 'west': 2, 'none': 1, 'east': 3.
                                         erpsDomainGuardTimer 1.3.6.1.4.1.259.8.1.11.1.62.2.1.9 integer32 read-only
Configures the value of the guard timer which is used to prevent ring nodes from receiving outdated R-APS messages. The range is in 10 ms steps between 10 ms and 2 seconds, with a default value of 500 ms.
                                         erpsDomainHoldoffTimer 1.3.6.1.4.1.259.8.1.11.1.62.2.1.10 integer32 read-only
Configures the value of the holdoff timer which is used to prevent reporting error event immediately to protection switching if the provisioned holdoff timer value is non-zero. The range is in 100 ms steps between 0 and 10 seconds, with a default value of 0 ms.
                                         erpsDomainWtrTimer 1.3.6.1.4.1.259.8.1.11.1.62.2.1.11 integer32 read-only
Configures the value of the wait-to-restore timer which is used by the RPL owner node to prevent frequent switching operations that may be caused by intermittent failures. The range is in 1 minute steps between 5 and 12 minutes with a default value of 5 minutes. This object will not take effect for the non RPL owner node.
                                         erpsDomainControlVlanID 1.3.6.1.4.1.259.8.1.11.1.62.2.1.12 integer32 read-only
This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. Configures one control VLAN for each ERPS domain. The control VLAN is used only to send and receive ERPS message. A control VLAN can not belong to more than one ERPS domain. A value of 0 means no control VLAN configured for this domain.
                                         erpsDomainNodeState 1.3.6.1.4.1.259.8.1.11.1.62.2.1.13 integer read-only
This value displays the node's current state. It displays one of the following states (1) init -- The node is in the init state. (The node state will stay in init state if global status or domain status is not enabled.) (2) idle -- The node is in idle state (i.e., no detected failures, and receiving only 'NR, RB' R-APS frames). (3) protection -- The node is in protection state. (4) manualSwitch -- The node is in manual switch state. (5) forcedSwitch -- The node is in forced switch state. (6) pending -- The node is in pending state. Enumeration: 'init': 1, 'idle': 2, 'protection': 3, 'manualSwitch': 4, 'forcedSwitch': 5, 'pending': 6.
                                         erpsDomainWestRingPortState 1.3.6.1.4.1.259.8.1.11.1.62.2.1.14 integer read-only
This value displays the west ring port's current state. It displays one of the following states (1) unknown -- The port's current state is unknown. (The port's current state will stay in unknown state if the node's current state is in init state.) (2) blocking -- The transmission and reception of traffic are blocked. (3) forwarding -- The traffic can be transmitted and received normally. Enumeration: 'unknown': 1, 'forwarding': 3, 'blocking': 2.
                                         erpsDomainEastRingPortState 1.3.6.1.4.1.259.8.1.11.1.62.2.1.15 integer read-only
This value displays the east ring port's current state. It displays one of the following states (1) unknown -- The port's current state is unknown. (The port's current state will stay in unknown state if the node's current state is in init state.) (2) blocking -- The transmission and reception of traffic are blocked. (3) forwarding -- The traffic can be transmitted and received normally. Enumeration: 'unknown': 1, 'forwarding': 3, 'blocking': 2.
                                         erpsDomainRowStatus 1.3.6.1.4.1.259.8.1.11.1.62.2.1.16 rowstatus read-only
The status of this conceptual row entry. This object is used to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB. Note that other objects can not be modified when the status is active.
                                         erpsDomainMajorDomainIndex 1.3.6.1.4.1.259.8.1.11.1.62.2.1.17 integer32 read-only
An index that uniquely identifies an entry in the erpsDomainTable. A value of 0 means this domain has no major domain. Notes: This objest can not be configured if erpsDomainRingPortEast has a vaule other than 0.
                                         erpsDomainPropagateTC 1.3.6.1.4.1.259.8.1.11.1.62.2.1.18 integer read-only
Set to enabled(1) to transmit topology change signal to the major domain. It will not take effect, if erpsDomainMajorDomainIndex has a value of 0. Enumeration: 'disabled': 2, 'enabled': 1.
                                         erpsDomainWestMepId 1.3.6.1.4.1.259.8.1.11.1.62.2.1.20 integer32 read-only
Configures a CFM Down MEP on west ring port. A down MEP can be uniquely select by given a MEPID, domain's MEG level, and domain's control VLAN ID. A value of 0 means no west MEP is not configured for this domain.
                                         erpsDomainEastMepId 1.3.6.1.4.1.259.8.1.11.1.62.2.1.21 integer32 read-only
Configures a CFM Down MEP on east ring port. A down MEP can be uniquely select by given a MEPID, domain's MEG level, and domain's control VLAN ID. A value of 0 means no east MEP is not configured for this domain.
                                         erpsDomainNonErpsDevProtect 1.3.6.1.4.1.259.8.1.11.1.62.2.1.22 integer read-only
Set to enabled(1) to use non-standard protection mechanism for network containing non-ERPS devices. Enumeration: 'disabled': 2, 'enabled': 1.
                                         erpsDomainNodeType 1.3.6.1.4.1.259.8.1.11.1.62.2.1.23 integer read-only
Set to none(1) to make this node act as a normal node. Set to owner(2) to make this node act as an RPL owner. Set to neighbor(3) to make this node act as an RPL neighbor. Enumeration: 'owner': 2, 'none': 1, 'neighbor': 3.
                                         erpsDomainNonRevertive 1.3.6.1.4.1.259.8.1.11.1.62.2.1.24 integer read-only
Set to enabled(1) to enable non-revertive mode operation. Enumeration: 'disabled': 2, 'enabled': 1.
                                         erpsDomainRapsDefMac 1.3.6.1.4.1.259.8.1.11.1.62.2.1.25 integer read-only
Set to enabled(1) to use R-APS default MAC. Enumeration: 'disabled': 2, 'enabled': 1.
                                         erpsDomainRapsWithoutVc 1.3.6.1.4.1.259.8.1.11.1.62.2.1.26 integer read-only
Set to enabled(1) to enable R-APS sub ring without virtual-channel for a sub domain. Enumeration: 'disabled': 2, 'enabled': 1.
                                         erpsDomainVersion 1.3.6.1.4.1.259.8.1.11.1.62.2.1.27 integer read-only
Set to v2(2) to enable ERPS v2 operation. Enumeration: 'v1': 1, 'v2': 2.
                                         erpsDomainForcedSwitch 1.3.6.1.4.1.259.8.1.11.1.62.2.1.28 integer read-only
Set to west(2) to perform the forced switch command on west ring port of specified domain. Set to east(3) to perform the forced switch command on east ring port of specified domain. The value none(1) will be displayed if no forced switch command is issued on local node. Enumeration: 'west': 2, 'none': 1, 'east': 3.
                                         erpsDomainManualSwitch 1.3.6.1.4.1.259.8.1.11.1.62.2.1.29 integer read-only
Set to west(2) to perform the manual switch command on west ring port of specified domain. Set to east(3) to perform the manual switch command on east ring port of specified domain. The value none(1) will be displayed if no manual switch command is issued on local node. Enumeration: 'west': 2, 'none': 1, 'east': 3.
                                         erpsDomainClear 1.3.6.1.4.1.259.8.1.11.1.62.2.1.30 integer read-only
Set to clear(1) to perform the clear command on specified domain. The value noClear(2) will always be displayed when reading. Enumeration: 'clear': 1, 'noClear': 2.
                                         erpsDomainStatsClearAction 1.3.6.1.4.1.259.8.1.11.1.62.2.1.31 integer read-write
This variable is used to clear the counters of specified domain. Set to clear(1) to perform the clear operation. The value noClear(2) will always be displayed when reading. Enumeration: 'clear': 1, 'noClear': 2.
                                         erpsDomainWtbTimer 1.3.6.1.4.1.259.8.1.11.1.62.2.1.32 integer32 read-only
Displays the value of the wait-to-block timer in ms which is used by the RPL owner node when recovering from an operator command (i.e. FS or MS). This object will not take effect for a non RPL owner node.
                                         erpsDomainWtbExpire 1.3.6.1.4.1.259.8.1.11.1.62.2.1.33 integer32 read-only
Displays the time remaining in ms until the wait-to-block timer countdown expires. A value of 0 means no countdown is running.
                                         erpsDomainWtrExpire 1.3.6.1.4.1.259.8.1.11.1.62.2.1.34 integer32 read-only
Displays the time remaining in seconds until the wait-to-restore timer countdown expires. A value of 0 means no countdown is running.
                                         erpsDomainWestRingPortSf 1.3.6.1.4.1.259.8.1.11.1.62.2.1.35 integer read-only
This value displays the west ring port's current SF state. It displays one of the following states (1) none -- No SF is detected. (2) detected -- SF is detected. Enumeration: 'none': 1, 'detected': 2.
                                         erpsDomainEastRingPortSf 1.3.6.1.4.1.259.8.1.11.1.62.2.1.36 integer read-only
This value displays the east ring port's current SF state. It displays one of the following states (1) none -- No SF is detected. (2) detected -- SF is detected. Enumeration: 'none': 1, 'detected': 2.
                                         erpsDomainMultiRplOwnerWarn 1.3.6.1.4.1.259.8.1.11.1.62.2.1.37 integer read-only
This value displays the multiple PPL owner warning state. It displays one of the following states (1) none -- No multiple PPL owner warning is detected. (2) detected -- Multiple RPL owner warning is detected. Enumeration: 'none': 1, 'detected': 2.
                                 erpsGlobalClearStatisticsAction 1.3.6.1.4.1.259.8.1.11.1.62.3 integer read-write
This variable is used to clear the counters of all ERPS domains. Set to clear(1) to perform the clear operation. The value noClear(2) will always be displayed when reading. Enumeration: 'clear': 1, 'noClear': 2.
                                 erpsPortStatsTable 1.3.6.1.4.1.259.8.1.11.1.62.4 no-access
Table for port statistics in ERPS.
                                     erpsPortStatsEntry 1.3.6.1.4.1.259.8.1.11.1.62.4.1 no-access
Entry for port statistics in ERPS.
                                         erpsPortStatsDomainIndex 1.3.6.1.4.1.259.8.1.11.1.62.4.1.1 integer32 no-access
An index that uniquely identifies an entry in the erpsDomainTable.
                                         erpsPortStatsPortIndex 1.3.6.1.4.1.259.8.1.11.1.62.4.1.2 integer no-access
This object indicates the port in an ERPS domain. The value west(1) means the west ring port. The value east(2) means the east ring port. Enumeration: 'west': 1, 'east': 2.
                                         erpsPortStatsLocalSfCount 1.3.6.1.4.1.259.8.1.11.1.62.4.1.3 counter32 read-only
Indicates the total number of local SF events that occurred on this ring port.
                                         erpsPortStatsLocalClrSfCount 1.3.6.1.4.1.259.8.1.11.1.62.4.1.4 counter32 read-only
Indicates the total number of local Clear SF events that occurred on this ring port.
                                         erpsPortStatsSentSfPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.5 counter32 read-only
Indicates the total number of R-APS SF messages sent via this ring port (not including the forwarded ones).
                                         erpsPortStatsSentNrPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.6 counter32 read-only
Indicates the total number of R-APS NR messages sent via this ring port (not including the forwarded ones).
                                         erpsPortStatsSentNrRbPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.7 counter32 read-only
Indicates the total number of R-APS NR-RB messages sent via this ring port (not including the forwarded ones).
                                         erpsPortStatsSentFsPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.8 counter32 read-only
Indicates the total number of R-APS FS messages sent via this ring port (not including the forwarded ones).
                                         erpsPortStatsSentMsPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.9 counter32 read-only
Indicates the total number of R-APS MS messages sent via this ring port (not including the forwarded ones).
                                         erpsPortStatsSentEventPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.10 counter32 read-only
Indicates the total number of R-APS EVENT messages sent via this ring port (not including the forwarded ones).
                                         erpsPortStatsSentHealthPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.11 counter32 read-only
Indicates the total number of non-standard health-check messages sent via this ring port (not including the forwarded ones).
                                         erpsPortStatsRecvSfPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.12 counter32 read-only
Indicates the total number of R-APS SF messages received via this ring port (not including the ignored ones).
                                         erpsPortStatsRecvNrPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.13 counter32 read-only
Indicates the total number of R-APS NR messages received via this ring port (not including the ignored ones).
                                         erpsPortStatsRecvNrRbPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.14 counter32 read-only
Indicates the total number of R-APS NR-RB messages received via this ring port (not including the ignored ones).
                                         erpsPortStatsRecvFsPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.15 counter32 read-only
Indicates the total number of R-APS FS messages received via this ring port (not including the ignored ones).
                                         erpsPortStatsRecvMsPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.16 counter32 read-only
Indicates the total number of R-APS MS messages received via this ring port (not including the ignored ones).
                                         erpsPortStatsRecvEventPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.17 counter32 read-only
Indicates the total number of R-APS EVENT messages received via this ring port (not including the ignored ones).
                                         erpsPortStatsRecvHealthPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.18 counter32 read-only
Indicates the total number of non-standard health-check messages received via this ring port (not including the ignored ones).
                                         erpsPortStatsIgnoreSfPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.19 counter32 read-only
Indicates the total number of R-APS SF messages ignored by this ring port because they have been timed out or for other reasons.
                                         erpsPortStatsIgnoreNrPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.20 counter32 read-only
Indicates the total number of R-APS NR messages ignored by this ring port because they have been timed out or for other reasons.
                                         erpsPortStatsIgnoreNrRbPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.21 counter32 read-only
Indicates the total number of R-APS NR-RB messages ignored by this ring port because they have been timed out or for other reasons.
                                         erpsPortStatsIgnoreFsPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.22 counter32 read-only
Indicates the total number of R-APS FS messages ignored by this ring port because they have been timed out or for other reasons.
                                         erpsPortStatsIgnoreMsPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.23 counter32 read-only
Indicates the total number of R-APS MS messages ignored by this ring port because they have been timed out or for other reasons.
                                         erpsPortStatsIgnoreEventPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.24 counter32 read-only
Indicates the total number of R-APS EVENT messages ignored by this ring port because they have been timed out or for other reasons.
                                         erpsPortStatsIgnoreHealthPkts 1.3.6.1.4.1.259.8.1.11.1.62.4.1.25 counter32 read-only
Indicates the total number of non-standard health-check messages ignored by this ring port because they have been timed out or for other reasons.
                           lbdMgt 1.3.6.1.4.1.259.8.1.11.1.63
                                 lbdGlobal 1.3.6.1.4.1.259.8.1.11.1.63.1
                                     lbdGlobalStatus 1.3.6.1.4.1.259.8.1.11.1.63.1.1 integer read-write
Set enabled(1) to enable global LBD status. Set disabled(2) to disable global LBD status. Enumeration: 'disabled': 2, 'enabled': 1.
                                     lbdTransmitInterval 1.3.6.1.4.1.259.8.1.11.1.63.1.2 unsigned32 read-write
The transmission interval for LBD control frames.
                                     lbdRecoverTime 1.3.6.1.4.1.259.8.1.11.1.63.1.3 unsigned32 read-write
The recover time used by LBD auto recovery mechanism. A value of 0 disables auto recovery.
                                     lbdMode 1.3.6.1.4.1.259.8.1.11.1.63.1.4 integer read-write
The detection mode of LBD. Enumeration: 'port-based': 1, 'vlan-based': 2.
                                     lbdAction 1.3.6.1.4.1.259.8.1.11.1.63.1.5 integer read-write
The protection action of LBD. Enumeration: 'none': 1, 'shutdown': 2, 'block': 3.
                                     lbdTrap 1.3.6.1.4.1.259.8.1.11.1.63.1.6 integer read-write
The kind of SNMP traps for LBD will be sent. Enumeration: 'both': 4, 'none': 1, 'detect': 2, 'recover': 3.
                                 lbdInterface 1.3.6.1.4.1.259.8.1.11.1.63.2
                                     lbdPortTable 1.3.6.1.4.1.259.8.1.11.1.63.2.1 no-access
A table containing LBD configurations for all interfaces.
                                         lbdPortEntry 1.3.6.1.4.1.259.8.1.11.1.63.2.1.1 no-access
An instance containing the configuration of LBD at each interface.
                                             lbdPortIfIndex 1.3.6.1.4.1.259.8.1.11.1.63.2.1.1.1 interfaceindex no-access
The ifIndex value of the port.
                                             lbdPortAdminState 1.3.6.1.4.1.259.8.1.11.1.63.2.1.1.2 integer read-write
The LBD administrative port status. Enumeration: 'disabled': 2, 'enabled': 1.
                                             lbdPortOperState 1.3.6.1.4.1.259.8.1.11.1.63.2.1.1.3 integer read-only
The LBD operative port status. Enumeration: 'looped': 2, 'normal': 1.
                                             lbdPortLoopedVlan 1.3.6.1.4.1.259.8.1.11.1.63.2.1.1.4 octet string read-only
The list of VLANs on which loopback is detected. Only when oper state is looped and mode is VLAN-based, the value is nonzero.
                           mvr6Mgt 1.3.6.1.4.1.259.8.1.11.1.66
                                 mvr6DomainTable 1.3.6.1.4.1.259.8.1.11.1.66.1 no-access
The table for configuring the MVR port.
                                     mvr6DomainEntry 1.3.6.1.4.1.259.8.1.11.1.66.1.1 no-access
The entry for configuring the MVR Domain.
                                         mvr6DomainId 1.3.6.1.4.1.259.8.1.11.1.66.1.1.1 integer32 no-access
Speicfies which MVR domain to configure.
                                         mvr6DomainStatus 1.3.6.1.4.1.259.8.1.11.1.66.1.1.2 enabledstatus read-write
Parameter to enable or disable MVR(Multicast VLAN Registration) on the device.
                                         mvr6DomainRunningStatus 1.3.6.1.4.1.259.8.1.11.1.66.1.1.3 integer read-only
Describes the running status of MVR (Multicast VLAN Registration) to the switch. A value of active(1) indicates that all necessary conditions in the MVR environment are satisfied. A value of inactive(2) indicates that some necessary conditions in the MVR environment are not satisfied. Enumeration: 'active': 1, 'inactive': 2.
                                         mvr6DomainVlanId 1.3.6.1.4.1.259.8.1.11.1.66.1.1.4 vlanindex read-write
To set VLAN for MVR.The VLAN identified by a particular value of this index is the same VLAN as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
                                         mvr6DomainUpstreamSourceIpv6 1.3.6.1.4.1.259.8.1.11.1.66.1.1.5 inetaddressipv6 read-write
Set the source IP address which MVR will carry in IP header when send IGMP packet to upstream router through MVR source port.
                                         mvr6DomainClearDynamicGroups 1.3.6.1.4.1.259.8.1.11.1.66.1.1.6 truthvalue read-write
Clear dynamic learned groups
                                 mvr6DomainPortTable 1.3.6.1.4.1.259.8.1.11.1.66.2 no-access
The table for configuring the MVR port.
                                     mvr6DomainPortEntry 1.3.6.1.4.1.259.8.1.11.1.66.2.1 no-access
The entry for configuring the MVR port.
                                         mvr6PortDomainId 1.3.6.1.4.1.259.8.1.11.1.66.2.1.1 integer32 no-access
Speicfies which MVR domain to configure.
                                         mvr6DomainIfIndex 1.3.6.1.4.1.259.8.1.11.1.66.2.1.2 interfaceindex no-access
The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                         mvr6DomainPortType 1.3.6.1.4.1.259.8.1.11.1.66.2.1.3 integer read-write
For configuring the MVR port type. To disable the MVR port type, use the none(0). Enumeration: 'source': 1, 'none': 0, 'receiver': 2.
                                         mvr6DomainPortImmediateLeave 1.3.6.1.4.1.259.8.1.11.1.66.2.1.4 enabledstatus read-write
To enable immediate leave on MVR port.
                                         mvr6DomainPortActive 1.3.6.1.4.1.259.8.1.11.1.66.2.1.5 integer read-only
To indicate if the port is associated with the MVR group. If the port is the MVR receiver port or the MVR source port in MVR vlan, the status is active(1); otherwise the status is inactive(2). Enumeration: 'active': 1, 'inactive': 2.
                                         mvr6DomainPortImmediateLeaveByHostIp 1.3.6.1.4.1.259.8.1.11.1.66.2.1.6 enabledstatus read-write
To enable immediate leave by host IP on MVR port.
                                 mvr6DomainAssociatedProfileTable 1.3.6.1.4.1.259.8.1.11.1.66.4 no-access
Configure MVR domain associate which MVR profile
                                     mvr6DomainAssociatedProfileEntry 1.3.6.1.4.1.259.8.1.11.1.66.4.1 no-access
The entry for configuring MVR domain associate MVR profile.
                                         mvr6ProfileDomainId 1.3.6.1.4.1.259.8.1.11.1.66.4.1.1 integer32 no-access
Profile ID to index which MVR profile
                                         mvr6ProfileId 1.3.6.1.4.1.259.8.1.11.1.66.4.1.2 integer32 no-access
Profile ID to index which MVR profile
                                         mvr6ProfileAction 1.3.6.1.4.1.259.8.1.11.1.66.4.1.3 integer read-write
Set this object to create(1) to associate profile. Set this object to destory(2) to deassociate profile. When the action is complete, this object becomes noAction(0). Enumeration: 'create': 1, 'noAction': 0, 'destory': 2.
                                 mvr6DomainGroupStaticTable 1.3.6.1.4.1.259.8.1.11.1.66.5 no-access
The table for configuring the static members of the MVR group.
                                     mvr6DomainGroupStaticEntry 1.3.6.1.4.1.259.8.1.11.1.66.5.1 no-access
The entry for configuring the static members of the MVR group.
                                         mvr6GroupStaticDomainId 1.3.6.1.4.1.259.8.1.11.1.66.5.1.1 integer32 no-access
Profile ID to index which MVR profile
                                         mvr6DomainGroupStaticAddress 1.3.6.1.4.1.259.8.1.11.1.66.5.1.2 inetaddressipv6 no-access
The multicast address of the MVR group.
                                         mvr6DomainGroupStaticReceiverVlan 1.3.6.1.4.1.259.8.1.11.1.66.5.1.3 integer32 no-access
The receiver vlan of this MVR group
                                         mvr6DomainGroupStaticPorts 1.3.6.1.4.1.259.8.1.11.1.66.5.1.4 portlist read-write
The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group.
                                 mvr6DomainGroupCurrentTable 1.3.6.1.4.1.259.8.1.11.1.66.6 no-access
The table for the current members of the MVR group.
                                     mvr6DomainGroupCurrentEntry 1.3.6.1.4.1.259.8.1.11.1.66.6.1 no-access
The entry for the current members of the MVR group.
                                         mvr6GroupCurrenDomainId 1.3.6.1.4.1.259.8.1.11.1.66.6.1.1 integer32 no-access
Profile ID to index which MVR profile
                                         mvr6DomainGroupCurrentAddress 1.3.6.1.4.1.259.8.1.11.1.66.6.1.2 octet string no-access
The multicast address of the MVR group.
                                         mvr6DomainGroupCurrentReceiverVlan 1.3.6.1.4.1.259.8.1.11.1.66.6.1.3 integer32 no-access
This object indicates the receiver VLAN of the MVR group.
                                         mvr6DomainGroupCurrentPorts 1.3.6.1.4.1.259.8.1.11.1.66.6.1.4 portlist read-only
The complete set of ports currently associated with this MVR group.
                                 mvr6ProxySwitching 1.3.6.1.4.1.259.8.1.11.1.66.16 enabledstatus read-write
Parameter to enable or disable MVR(Multicast VLAN Registration) proxy switching ability on the device.
                                 mvr6RobustnessValue 1.3.6.1.4.1.259.8.1.11.1.66.17 integer32 read-write
Paremete to set IGMP robustness value. This value apply to proxy-switching for how many IGMP report/leave will be send out from source port, and how many g-s query will be send on receiver port.
                                 mvr6ProfileTable 1.3.6.1.4.1.259.8.1.11.1.66.22
                                       mvr6ProfileCtlTable 1.3.6.1.4.1.259.8.1.11.1.66.22.1 no-access
The entry for configuring the MVR6 profile.
                                           mvr6ProfileCtlEntry 1.3.6.1.4.1.259.8.1.11.1.66.22.1.1 no-access
The entry for configuring the MVR6 profile.
                                               mvr6ProfileCtlId 1.3.6.1.4.1.259.8.1.11.1.66.22.1.1.1 integer32 no-access
Profile ID to index which MVR6 profile
                                               mvr6ProfileName 1.3.6.1.4.1.259.8.1.11.1.66.22.1.1.2 octet string read-write
MVR6 Profile name which identify a group range. NOTE: All mvr6ProfileCtlEntry use the same buffer to temply store the mvrProfileName before mvr6ProfileCtlAction really creat the profile.
                                               mvr6ProfileCtlAction 1.3.6.1.4.1.259.8.1.11.1.66.22.1.1.5 integer read-write
Set this object to create(2) to create profile. Set this object to destory(3) to delete profile. When the action is complete, this object becomes noAction(1). Enumeration: 'create': 1, 'noAction': 0, 'destory': 2.
                                       mvr6ProfileGroupCtlTable 1.3.6.1.4.1.259.8.1.11.1.66.22.2 no-access
The entry for configuring the MVR group ranges for MVR6 profile.
                                           mvr6ProfileGroupCtlEntry 1.3.6.1.4.1.259.8.1.11.1.66.22.2.1 no-access
The entry for configuring the group ranges on MVR6 profile.
                                               mvr6ProfileGropuCtlProfileId 1.3.6.1.4.1.259.8.1.11.1.66.22.2.1.1 integer32 no-access
Profile ID to index which MVR6 profile
                                               mvr6ProfileGroupCtlId 1.3.6.1.4.1.259.8.1.11.1.66.22.2.1.2 integer32 no-access
Profile ID to index which group range in MVR6 profile
                                               mvr6ProfileGroupStartIPAddress 1.3.6.1.4.1.259.8.1.11.1.66.22.2.1.3 inetaddress read-write
MVR Profile range start IP address. NOTE: All Mvr6ProfileGroupCtlEntry use the same buffer to temply store the mvr6ProfileStartIPAddress before mvr6ProfileGroupCtlAction really creat the group rang on profile.
                                               mvr6ProfileGroupEndIPAddress 1.3.6.1.4.1.259.8.1.11.1.66.22.2.1.4 inetaddress read-write
MVR6 Profile range end IP address. NOTE: All Mvr6ProfileGroupCtlEntry use the same buffer to temply store the mvr6ProfileEndIPAddress before mvr6ProfileGroupCtlAction really creat the group rang on profile.
                                               mvr6ProfileGroupCtlAction 1.3.6.1.4.1.259.8.1.11.1.66.22.2.1.5 integer read-write
Set this object to create(2) to create group range. Set this object to destory(3) to delete group range. When the action is complete, this object becomes noAction(1). NOTE: If mvr6ProfileGroupStartIPAddress and mvr6ProfileGroupEndIPAddress pattern already exist on other mvr6ProfileGroupCtlAction, it won't be stored. Enumeration: 'create': 1, 'noAction': 0, 'destory': 2.
                                 mvr6ProxyQueryInterval 1.3.6.1.4.1.259.8.1.11.1.66.23 integer32 read-write
Set the query interval that active receiver port will use to send out general query
                                 mvr6SourcePortMode 1.3.6.1.4.1.259.8.1.11.1.66.24 integer read-write
Dynamic means active source port will only forward multicast stream when it has group joined. Forward means active source port will always forward MVR group range multicast streams recieved on another acitve source port. Enumeration: 'forward': 2, 'dynamic': 1.
                                 mvr6PortStatisticsTable 1.3.6.1.4.1.259.8.1.11.1.66.26 no-access
Table of Mvr6 statistics VLAN.
                                       mvr6PortStatisticsEntry 1.3.6.1.4.1.259.8.1.11.1.66.26.1 no-access
Entry of Mvr6 statistics VLAN.
                                           mvr6PortStatisticsDomainId 1.3.6.1.4.1.259.8.1.11.1.66.26.1.1 integer32 no-access
The port and the trunk (excluding trunk members) interface of the mvr6PortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                           mvr6PortStatisticsPortIndex 1.3.6.1.4.1.259.8.1.11.1.66.26.1.2 interfaceindex no-access
The port and the trunk (excluding trunk members) interface of the mvr6PortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                           mvr6PortStatisticsNumGroups 1.3.6.1.4.1.259.8.1.11.1.66.26.1.3 unsigned32 read-only
Current learned groups
                                           mvr6PortStatisticsNumJoinSend 1.3.6.1.4.1.259.8.1.11.1.66.26.1.4 unsigned32 read-only
Number of join send
                                           mvr6PortStatisticsNumJoins 1.3.6.1.4.1.259.8.1.11.1.66.26.1.5 unsigned32 read-only
Number of join recieved
                                           mvr6PortStatisticsNumJoinSuccess 1.3.6.1.4.1.259.8.1.11.1.66.26.1.6 unsigned32 read-only
Number of join group success
                                           mvr6PortStatisticsNumLeavesSend 1.3.6.1.4.1.259.8.1.11.1.66.26.1.7 unsigned32 read-only
Number of leave send
                                           mvr6PortStatisticsNumLeaves 1.3.6.1.4.1.259.8.1.11.1.66.26.1.8 unsigned32 read-only
Number of leave received
                                           mvr6PortStatisticsNumGeneralQuerySend 1.3.6.1.4.1.259.8.1.11.1.66.26.1.9 unsigned32 read-only
Number of general query send.
                                           mvr6PortStatisticsNumGeneralQueryRecevied 1.3.6.1.4.1.259.8.1.11.1.66.26.1.10 unsigned32 read-only
Number of general query received.
                                           mvr6PortStatisticsNumSepcificQuerySend 1.3.6.1.4.1.259.8.1.11.1.66.26.1.11 unsigned32 read-only
Number of specific query send.
                                           mvr6PortStatisticsNumSpecificQueryReceived 1.3.6.1.4.1.259.8.1.11.1.66.26.1.12 unsigned32 read-only
Number of specific query received.
                                           mvr6PortStatisticsNumInvalidReport 1.3.6.1.4.1.259.8.1.11.1.66.26.1.13 unsigned32 read-only
Number of invalid report received.
                                           mvr6PortStatisticsClearStatistics 1.3.6.1.4.1.259.8.1.11.1.66.26.1.14 truthvalue read-write
Clear this VLAN all statistics
                                 mvr6VlanStatisticsTable 1.3.6.1.4.1.259.8.1.11.1.66.27 no-access
Table of Mvr6 statistics VLAN.
                                       mvr6VlanStatisticsEntry 1.3.6.1.4.1.259.8.1.11.1.66.27.1 no-access
Entry of Mvr6 statistics VLAN.
                                           mvr6VlanStatisticsDomainId 1.3.6.1.4.1.259.8.1.11.1.66.27.1.1 integer32 no-access
domain ID
                                           mvr6VlanStatisticsVlanId 1.3.6.1.4.1.259.8.1.11.1.66.27.1.2 vlanindex no-access
VLAN ID
                                           mvr6VlanStatisticsNumGroups 1.3.6.1.4.1.259.8.1.11.1.66.27.1.3 unsigned32 read-only
Current learned groups
                                           mvr6VlanStatisticsNumJoinSend 1.3.6.1.4.1.259.8.1.11.1.66.27.1.4 unsigned32 read-only
Number of join send.
                                           mvr6VlanStatisticsNumJoins 1.3.6.1.4.1.259.8.1.11.1.66.27.1.5 unsigned32 read-only
Number of join received
                                           mvr6VlanStatisticsNumJoinSuccess 1.3.6.1.4.1.259.8.1.11.1.66.27.1.6 unsigned32 read-only
Number of jion success
                                           mvr6VlanStatisticsNumLeavesSend 1.3.6.1.4.1.259.8.1.11.1.66.27.1.7 unsigned32 read-only
Number of leave send.
                                           mvr6VlanStatisticsNumLeaves 1.3.6.1.4.1.259.8.1.11.1.66.27.1.8 unsigned32 read-only
Number of leave received
                                           mvr6VlanStatisticsNumGeneralQuerySend 1.3.6.1.4.1.259.8.1.11.1.66.27.1.9 unsigned32 read-only
Number of general query send
                                           mvr6VlanStatisticsNumGeneralQueryRecevied 1.3.6.1.4.1.259.8.1.11.1.66.27.1.10 unsigned32 read-only
Number of general query received
                                           mvr6VlanStatisticsNumSepcificQuerySend 1.3.6.1.4.1.259.8.1.11.1.66.27.1.11 unsigned32 read-only
Number of specific query send
                                           mvr6VlanStatisticsNumSpecificQueryReceived 1.3.6.1.4.1.259.8.1.11.1.66.27.1.12 unsigned32 read-only
Number of sepcific query received
                                           mvr6VlanStatisticsNumInvalidReport 1.3.6.1.4.1.259.8.1.11.1.66.27.1.13 unsigned32 read-only
Number of invalid report received
                                           mvr6VlanStatisticsClearStatistics 1.3.6.1.4.1.259.8.1.11.1.66.27.1.14 truthvalue read-write
Clear this VLAN statistics
                                 mvr6ForwardingPriority 1.3.6.1.4.1.259.8.1.11.1.66.28 integer32 read-write
Configure MVR multicast stream forwarding priority. If value is 65535, it means the priority is disabled.
                           ipv6RaGuardMgt 1.3.6.1.4.1.259.8.1.11.1.67
                                 ipv6RaGuardPortTable 1.3.6.1.4.1.259.8.1.11.1.67.1 no-access
Table for IPv6 RA Guard port configuration.
                                     ipv6RaGuardPortEntry 1.3.6.1.4.1.259.8.1.11.1.67.1.1 no-access
Entry for IPv6 RA Guard port configuration.
                                         ipv6RaGuardPortIndex 1.3.6.1.4.1.259.8.1.11.1.67.1.1.1 interfaceindex no-access
The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                         ipv6RaGuardPortStatus 1.3.6.1.4.1.259.8.1.11.1.67.1.1.2 enabledstatus read-write
A value of enabled (1) indicates that IPv6 RA Guard feature is enabled on interfaces. A value of disabled (2) indicates that the feature is disabled.
                           udldMgt 1.3.6.1.4.1.259.8.1.11.1.69
                                 udldGlobalMessageInterval 1.3.6.1.4.1.259.8.1.11.1.69.1 integer read-write
The message interval (in seconds) between UDLD probe messages on ports that are in advertisement phase and are determined to be bidirectional.
                                 udldPortTable 1.3.6.1.4.1.259.8.1.11.1.69.2 no-access
Table for port configuration of UDLD.
                                     udldPortEntry 1.3.6.1.4.1.259.8.1.11.1.69.2.1 no-access
Entry for port configuration of UDLD.
                                         udldPortIndex 1.3.6.1.4.1.259.8.1.11.1.69.2.1.1 interfaceindex no-access
The port (excluding trunk and trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                         udldPortStatus 1.3.6.1.4.1.259.8.1.11.1.69.2.1.2 enabledstatus read-write
This parameter is used to enable/disable UDLD on this interface.
                                         udldPortAggressiveStatus 1.3.6.1.4.1.259.8.1.11.1.69.2.1.3 enabledstatus read-write
This parameter is used to enable/disable aggressive mode of UDLD on this interface.
                                         udldPortOperState 1.3.6.1.4.1.259.8.1.11.1.69.2.1.4 integer read-only
The operational state of UDLD on this interface. Enumeration: 'disabled': 1, 'linkDown': 2, 'disabledPort': 6, 'detection': 5, 'advertisement': 4, 'linkUp': 3.
                                         udldPortPortState 1.3.6.1.4.1.259.8.1.11.1.69.2.1.5 integer read-only
The port state of UDLD on this interface. Enumeration: 'aggressiveModeFailure': 7, 'unknown': 1, 'neighborsEchoIsEmpty': 2, 'mismatchWithneighborStateReported': 4, 'unidirectional': 6, 'bidirectional': 3, 'transmitToReceiveLoop': 5.
                                         udldPortOperMessageInterval 1.3.6.1.4.1.259.8.1.11.1.69.2.1.6 integer read-only
The operational message interval (in seconds) used by UDLD on this interface.
                                         udldPortOperTimeout 1.3.6.1.4.1.259.8.1.11.1.69.2.1.7 integer read-only
The operational timeout interval (in seconds) used by UDLD to decide the basic length of the detection phase on this interface.
                                         udldPortNeighborDevCount 1.3.6.1.4.1.259.8.1.11.1.69.2.1.8 integer read-only
The total number of neighbor devices discovered on this interface.
                                 udldPortNeighborDevTable 1.3.6.1.4.1.259.8.1.11.1.69.3 no-access
Table of neighbor devices discovered by UDLD for each interface.
                                     udldPortNeighborDevEntry 1.3.6.1.4.1.259.8.1.11.1.69.3.1 no-access
A conceptual row containing the information of a neighbor device.
                                         udldPortNeighborDevPortIndex 1.3.6.1.4.1.259.8.1.11.1.69.3.1.1 interfaceindex no-access
The port (excluding trunk and trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                                         udldPortNeighborDevIndex 1.3.6.1.4.1.259.8.1.11.1.69.3.1.2 integer32 no-access
A 32-bit integer uniquely identifying the nieghbor device discovered by UDLD on a port interface.
                                         udldPortNeighborDevDevID 1.3.6.1.4.1.259.8.1.11.1.69.3.1.3 displaystring read-only
The device ID of this neighbor device.
                                         udldPortNeighborDevPortID 1.3.6.1.4.1.259.8.1.11.1.69.3.1.4 displaystring read-only
The port ID of this neighbor device.
                                         udldPortNeighborDevDevName 1.3.6.1.4.1.259.8.1.11.1.69.3.1.5 displaystring read-only
The device name of this neighbor device.
                                         udldPortNeighborDevNeighborState 1.3.6.1.4.1.259.8.1.11.1.69.3.1.6 integer read-only
The neighbor state of this neighbor device. Enumeration: 'bidirectional': 3, 'unknown': 1, 'unidirectional': 5, 'neighborsEchoIsEmpty': 2, 'mismatchWithneighborStateReported': 4.
                                         udldPortNeighborDevExpire 1.3.6.1.4.1.259.8.1.11.1.69.3.1.7 integer read-only
The amount of time remaining (in seconds) before this entry should expire. Whenever this period expires, this entry will be removed.
                                         udldPortNeighborDevMessageInterval 1.3.6.1.4.1.259.8.1.11.1.69.3.1.8 integer read-only
The message interval (in seconds) of this neighbor device.
                                         udldPortNeighborDevTimeout 1.3.6.1.4.1.259.8.1.11.1.69.3.1.9 integer read-only
The timeout interval (in seconds) of this neighbor device.
                                 udldGlobalDetectionInterval 1.3.6.1.4.1.259.8.1.11.1.69.4 integer read-write
The detection interval (in seconds) used for UDLD detection process.
                                 udldGlobalRecoveryInterval 1.3.6.1.4.1.259.8.1.11.1.69.5 integer read-write
The recovery interval (in seconds) used to recover interface shut down by UDLD automatically.
                                 udldGlobalRecovery 1.3.6.1.4.1.259.8.1.11.1.69.6 enabledstatus read-write
This parameter is used to enable/disable auto recovery feature.
                           dhcpv6SnoopMgt 1.3.6.1.4.1.259.8.1.11.1.71
                                 dhcpv6SnoopGlobal 1.3.6.1.4.1.259.8.1.11.1.71.1
                                     dhcpv6SnoopEnable 1.3.6.1.4.1.259.8.1.11.1.71.1.1 enabledstatus read-write
This object indicates whether the DHCPv6 Snooping feature is enabled.
                                     dhcpv6SnoopBindingTableClearAction 1.3.6.1.4.1.259.8.1.11.1.71.1.2 integer read-write
Action for clearing dhcpv6SnoopBindingTable. When this object is set to clear(2), all dynamic entries in dhcpv6SnoopBindingTable will be cleared. When this object is read, the value of this object is always noClear(1). Enumeration: 'clear': 2, 'noClear': 1.
                                     dhcpv6SnoopStatisticsClearAction 1.3.6.1.4.1.259.8.1.11.1.71.1.3 integer read-write
Action for clearing dhcpSnoopStatistics. When this object is set to clear(2), statistics in dhcpSnoopStatistics will be cleared. When this object is read, the value of this object is always noClear(1). Enumeration: 'clear': 2, 'noClear': 1.
                                 dhcpv6SnoopVlan 1.3.6.1.4.1.259.8.1.11.1.71.2
                                     dhcpv6SnoopVlanConfigTable 1.3.6.1.4.1.259.8.1.11.1.71.2.1 no-access
A table contains DHCPv6 Snooping configurations of existing VLANs.
                                         dhcpv6SnoopVlanConfigEntry 1.3.6.1.4.1.259.8.1.11.1.71.2.1.1 no-access
An instance contains the configuration to enable or disable DHCPv6 Snooping at each existing VLAN.
                                             dhcpv6SnoopVlanIndex 1.3.6.1.4.1.259.8.1.11.1.71.2.1.1.1 vlanindex no-access
This object indicates the VLAN ID on which DHCPv6 Snooping feature is configured.
                                             dhcpv6SnoopVlanEnable 1.3.6.1.4.1.259.8.1.11.1.71.2.1.1.2 enabledstatus read-write
This object indicates whether DHCPv6 Snooping is enabled in this VLAN.
                                 dhcpv6SnoopInterface 1.3.6.1.4.1.259.8.1.11.1.71.3
                                     dhcpv6SnoopPortConfigTable 1.3.6.1.4.1.259.8.1.11.1.71.3.1 no-access
A table provides the mechanism to configure the trust state of each port or trunk for DHCPv6 Snooping purpose.
                                         dhcpv6SnoopPortConfigEntry 1.3.6.1.4.1.259.8.1.11.1.71.3.1.1 no-access
An instance contains the configuration to enable or disable trust state of each port or trunk for DHCPv6 Snooping purpose.
                                             dhcpv6SnoopPortIfIndex 1.3.6.1.4.1.259.8.1.11.1.71.3.1.1.1 interfaceindex no-access
The ifIndex value of the port or trunk.
                                             dhcpv6SnoopPortTrustEnable 1.3.6.1.4.1.259.8.1.11.1.71.3.1.1.2 enabledstatus read-write
This object indicates whether the port or trunk is trusted for DHCP Snooping purpose.
                                             dhcpv6SnoopPortMaxBinding 1.3.6.1.4.1.259.8.1.11.1.71.3.1.1.3 integer32 read-write
The maximum number of binding entries of the port or trunk
                                             dhcpv6SnoopPortCurrentBinding 1.3.6.1.4.1.259.8.1.11.1.71.3.1.1.4 integer32 read-only
The number of dynamic binding entrires learned on the port or trunk.
                                 dhcpv6SnoopBinding 1.3.6.1.4.1.259.8.1.11.1.71.4
                                     dhcpv6SnoopBindingTable 1.3.6.1.4.1.259.8.1.11.1.71.4.1 no-access
A table contains the DHCPv6 binding entries information learned by the device.
                                         dhcpv6SnoopBindingEntry 1.3.6.1.4.1.259.8.1.11.1.71.4.1.1 no-access
An instance contains the link-layer address, ia type, ia id, IPv6 address, VLAN number, interface number, lifetime.
                                             dhcpv6SnoopBindingLinkLayerAddress 1.3.6.1.4.1.259.8.1.11.1.71.4.1.1.1 macaddress no-access
This object indicates the link-layer address of a DHCPv6 client host.
                                             dhcpv6SnoopBindingIaType 1.3.6.1.4.1.259.8.1.11.1.71.4.1.1.2 integer no-access
This object indicates the IPv6 address ia type of a DHCPv6 client host. na - Non-temporary address, ta - temporary address Enumeration: 'na': 3, 'ta': 4.
                                             dhcpv6SnoopBindingIaId 1.3.6.1.4.1.259.8.1.11.1.71.4.1.1.3 unsigned32 no-access
This object indicates the IPv6 address ia id of a DHCPv6 client host.
                                             dhcpv6SnoopBindingIpv6Address 1.3.6.1.4.1.259.8.1.11.1.71.4.1.1.4 inetaddress no-access
This object indicates the IPv6 address of a DHCPv6 client host.
                                             dhcpv6SnoopBindingVlanIndex 1.3.6.1.4.1.259.8.1.11.1.71.4.1.1.5 vlanindex read-only
This object indicates the VLAN which a DHCPv6 client host belongs to.
                                             dhcpv6SnoopBindingPortIfIndex 1.3.6.1.4.1.259.8.1.11.1.71.4.1.1.6 interfaceindex read-only
This object indicates the port or trunk where a DHCPv6 client host connects to.
                                             dhcpv6SnoopBindingLifeTime 1.3.6.1.4.1.259.8.1.11.1.71.4.1.1.7 unsigned32 read-only
This object indicates the life time of this DHCPv6 binding.
                                 dhcpv6SnoopStatistics 1.3.6.1.4.1.259.8.1.11.1.71.5
                                     dhcpSnoopRecvClientPkts 1.3.6.1.4.1.259.8.1.11.1.71.5.1 counter32 read-only
Indicates the received number of client packets
                                     dhcpSnoopSentClientPkts 1.3.6.1.4.1.259.8.1.11.1.71.5.2 counter32 read-only
Indicates the sent number of client packets
                                     dhcpSnoopDroppedClientPkts 1.3.6.1.4.1.259.8.1.11.1.71.5.3 counter32 read-only
Indicates the dropped number of client packets
                                     dhcpSnoopRecvServerPkts 1.3.6.1.4.1.259.8.1.11.1.71.5.4 counter32 read-only
Indicates the received number of server packets
                                     dhcpSnoopSentServerPkts 1.3.6.1.4.1.259.8.1.11.1.71.5.5 counter32 read-only
Indicates the sent number of server packets
                                     dhcpSnoopDroppedServerPkts 1.3.6.1.4.1.259.8.1.11.1.71.5.6 counter32 read-only
Indicates the dropped number of server packets
                                     dhcpSnoopRecvRelayPkts 1.3.6.1.4.1.259.8.1.11.1.71.5.7 counter32 read-only
Indicates the received number of relay packets
                                     dhcpSnoopSentRelayPkts 1.3.6.1.4.1.259.8.1.11.1.71.5.8 counter32 read-only
Indicates the sent number of relay packets
                                     dhcpSnoopDroppedRelayPkts 1.3.6.1.4.1.259.8.1.11.1.71.5.9 counter32 read-only
Indicates the dropped number of relay packets
                           snmpPrivateTrapMgt 1.3.6.1.4.1.259.8.1.11.1.79
                                 snmpAuthenInfoTrapStatus 1.3.6.1.4.1.259.8.1.11.1.79.1 enabledstatus read-write
Whether the SNMP authentication information trap is enabled(1) or disabled(2).
                       es3510maNotifications 1.3.6.1.4.1.259.8.1.11.2
                           es3510maTraps 1.3.6.1.4.1.259.8.1.11.2.1
                               es3510maTrapsPrefix 1.3.6.1.4.1.259.8.1.11.2.1.0
                                   swPowerStatusChangeTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.1
This trap is sent when the power state changes.
                                   swPortSecurityTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.36
This trap is sent when the port is being intruded. This trap will only be sent when the portSecActionTrap is enabled.
                                   swIpFilterRejectTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.40
This trap is sent when an incorrect IP address is rejected by the ipfilter.
                                   swAtcBcastStormAlarmFireTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.70
When the broadcast traffic is detected as the storm, this trap will be fired.
                                   swAtcBcastStormAlarmClearTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.71
When the broadcast storm is detected as the normal traffic, this trap will be fired.
                                   swAtcBcastStormTcApplyTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.72
When the ATC is activated, this trap will be fired.
                                   swAtcBcastStormTcReleaseTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.73
When the ATC is released, this trap will be fired.
                                   swAtcMcastStormAlarmFireTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.74
When the multicast traffic is detected as the storm, this trap will be fired.
                                   swAtcMcastStormAlarmClearTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.75
When the multicast storm is detected as the normal traffic, this trap will be fired.
                                   swAtcMcastStormTcApplyTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.76
When the ATC is activated, this trap will be fired.
                                   swAtcMcastStormTcReleaseTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.77
When the ATC is released, this trap will be fired.
                                   stpBpduGuardPortShutdownTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.91
This trap will be sent when an interface is shut down because of BPDU guard.
                                   swLoopbackDetectionTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.95
This trap will be sent when loopback BPDUs have been detected.
                                   networkAccessPortLinkDetectionTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.96
This trap is sent when a networkAccessPortLinkDetection event is triggered.
                                   dot1agCfmMepUpTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.97
This trap is sent when a new remote MEP is discovered.
                                   dot1agCfmMepDownTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.98
This trap is sent when port status or interface status TLV received from remote MEP indicates it is not up.
                                   dot1agCfmConfigFailTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.99
This trap is sent when a MEP receives a CCM with MPID which already exists on the same MA in this switch.
                                   dot1agCfmLoopFindTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.100
This trap is sent when a MEP receives its own CCMs.
                                   dot1agCfmMepUnknownTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.101
This trap is sent when a CCM is received from an unexpected MEP.
                                   dot1agCfmMepMissingTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.102
This trap is sent when the cross-check enable timer expires and no CCMs were received from an expected (configured) MEP.
                                   dot1agCfmMaUpTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.103
This trap is sent when all expected remote MEPs are up.
                                   autoUpgradeTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.104
This trap is sent when auto upgrade is executed.
                                   swCpuUtiRisingNotification 1.3.6.1.4.1.259.8.1.11.2.1.0.107
This notification indicates that the CPU utilization has risen from cpuUtiFallingThreshold to cpuUtiRisingThreshold.
                                   swCpuUtiFallingNotification 1.3.6.1.4.1.259.8.1.11.2.1.0.108
This notification indicates that the CPU utilization has fallen from cpuUtiRisingThreshold to cpuUtiFallingThreshold.
                                   swMemoryUtiRisingThresholdNotification 1.3.6.1.4.1.259.8.1.11.2.1.0.109
This notification indicates that the memory utilization has risen from memoryUtiFallingThreshold to memoryUtiRisingThreshold.
                                   swMemoryUtiFallingThresholdNotification 1.3.6.1.4.1.259.8.1.11.2.1.0.110
This notification indicates that the memory utilization has fallen from memoryUtiRisingThreshold to memoryUtiFallingThreshold.
                                   dhcpRogueServerAttackTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.114
This trap is sent when receiving a DHCP packet from a rogue server.
                                   lbdDetectionTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.141
This trap is sent when a loopback condition is detected by LBD.
                                   lbdRecoveryTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.142
This trap is sent when a recovery is done by LBD.
                                   sfpThresholdAlarmWarnTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.189
This trap is sent when the sfp's A/D quantity is not within alarm/warning thresholds.
                                   udldPortShutdownTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.192
This trap is sent when the port is shut down by UDLD.
                                   userAuthenticationFailureTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.199
This trap will be triggered if authentication is fail.
                                   userAuthenticationSuccessTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.200
This trap will be triggered if authentication is successful.
                                   loginTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.201
This trap is sent when user login.
                                   logoutTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.202
This trap is sent when user logout.
                                   fileCopyTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.208
This trap is sent when file copy is executed. If the copy action is triggered by system, the login user information(trapVarLoginUserName/ trapVarSessionType/trapVarLoginInetAddressTypes/ trapVarLoginInetAddres) will be null value.
                                   userauthCreateUserTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.209
This trap is sent when create user account.
                                   userauthDeleteUserTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.210
This trap is sent when delete user account.
                                   userauthModifyUserPrivilegeTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.211
This trap is sent when modify user privilege.
                                   cpuGuardControlTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.213
This trap is sent when CPU utilization rises above the high-watermark first time or when CPU utilization rises from below the low-watermark to above the high-watermark.
                                   cpuGuardReleaseTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.214
This trap is sent when CPU utilization falls from above the high-watermark to below the low-watermark.
                                   snmpAuthenInfoTrap 1.3.6.1.4.1.259.8.1.11.2.1.0.215
This trap is sent when SNMP authentication is failed.