ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB: View SNMP OID List / Download MIB

VENDOR: ERICSSON AB


 Home MIB: ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, SNMP-VIEW-BASED-ACM-MIB, ERICSSON-ROUTER-SMI, ERICSSON-ROUTER-TC, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 eriRouterSubscriberActiveMib 1.3.6.1.4.1.193.218.2.27
Defines the objects necessary to support the management of active subscribers. All mib objects, except eriRouterSubsCntxtCountTable, defined in the module are viewed within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3).
       eriRouterSubsActiveObjects 1.3.6.1.4.1.193.218.2.27.1
           eriRouterSubsActive 1.3.6.1.4.1.193.218.2.27.1.1
               eriRouterSubsActiveTable 1.3.6.1.4.1.193.218.2.27.1.1.1 no-access
This table contains subscriber sessions which have been authenticated on an circuit.
                   eriRouterSubsActiveEntry 1.3.6.1.4.1.193.218.2.27.1.1.1.1 no-access
A conceptual row in the eriRouterSubsActiveTable.
                       eriRouterSubsActiveName 1.3.6.1.4.1.193.218.2.27.1.1.1.1.1 snmpadminstring no-access
The name identifying this entry. An entry configured by other means may have been given a name whose length is greater than 80. Names which exceed this length are not accessible via SNMP operations.
                       eriRouterSubsActiveSessionId 1.3.6.1.4.1.193.218.2.27.1.1.1.1.2 snmpadminstring no-access
A value that uniquely identifies an active subscriber session. If RADIUS is being used to configure/authenticate subscribers, this value will appear in the RADIUS Acct-Session-Id attribute.
                       eriRouterSubsActiveCircuitDescr 1.3.6.1.4.1.193.218.2.27.1.1.1.1.3 snmpadminstring read-only
A string which provides identifying information (e.g slot/port) of the circuit the subscriber is using.
                       eriRouterSubsActiveCircuitHandle 1.3.6.1.4.1.193.218.2.27.1.1.1.1.4 eriroutercircuithandle read-only
A value for identifying circuits.
                       eriRouterSubsActiveStartTime 1.3.6.1.4.1.193.218.2.27.1.1.1.1.5 dateandtime read-only
The time when the subscriber became active.
                       eriRouterSubsActiveClear 1.3.6.1.4.1.193.218.2.27.1.1.1.1.6 truthvalue read-write
Setting this value to 'true' will clear the active subscriber session. In the case of PPP, the PPP state machinery attempts to renegotiate and re-authenticate a new session with the remote peer on the circuit. In the case of RFC 1483 encapsulated circuits the session is brought down and then back up and an attempt is made to re-authenticate the subscriber. An SNMP get operation always returns 'false'
                       eriRouterSubsActiveResend 1.3.6.1.4.1.193.218.2.27.1.1.1.1.7 truthvalue read-write
Setting this value to 'true' will cause a resend of the Radius acct-start packet. An SNMP get operation always returns 'false'
                       eriRouterSubsActiveNasPortType 1.3.6.1.4.1.193.218.2.27.1.1.1.1.8 unsigned32 read-only
The RADIUS attribute NAS-Port-Type which indicates the type of the physical port which is authenticating the user.
                       eriRouterSubsActiveMediumType 1.3.6.1.4.1.193.218.2.27.1.1.1.1.9 erirouterportmediumtype read-only
The medium type of the NAS-Port.
                       eriRouterSubsActiveResendSvcAcct 1.3.6.1.4.1.193.218.2.27.1.1.1.1.10 truthvalue read-write
Setting this value to 'true' will cause a resend of the Radius acct-start packet for all services associated with the active subscriber session. An SNMP get operation always returns 'false'
                       eriRouterSubsActiveState 1.3.6.1.4.1.193.218.2.27.1.1.1.1.11 eriroutersubscriberstate read-only
State of subscriber session.
                       eriRouterSubsActiveSessionNx 1.3.6.1.4.1.193.218.2.27.1.1.1.1.12 snmpadminstring read-only
This object returns the same value as eriRouterSubsActiveSessionId, Only difference is it's accessible object.
               eriRouterSubsActiveIpTable 1.3.6.1.4.1.193.218.2.27.1.1.2 no-access
This table contains IP addresses used by active subscribers.
                   eriRouterSubsActiveIpEntry 1.3.6.1.4.1.193.218.2.27.1.1.2.1 no-access
A conceptual row in the eriRouterSubsActiveIpTable.
                       eriRouterSubsActiveAddrType 1.3.6.1.4.1.193.218.2.27.1.1.2.1.1 inetaddresstype no-access
The address type of eriRouterSubsActiveAddr.
                       eriRouterSubsActiveAddr 1.3.6.1.4.1.193.218.2.27.1.1.2.1.2 inetaddress read-only
The host IP address of the active subscriber.
                       eriRouterSubsActiveAddrInt 1.3.6.1.4.1.193.218.2.27.1.1.2.1.3 unsigned32 read-only
The host IP address of the active subscriber. The value of this object is limited to the IPv4 address. Hence, mustbe used only when eriRouterSubsActiveIpAddrType is of type v4.
               eriRouterSubsClear 1.3.6.1.4.1.193.218.2.27.1.1.3
                   eriRouterSubsClearSubscriberName 1.3.6.1.4.1.193.218.2.27.1.1.3.1 snmpadminstring read-write
Setting this object to the subscriber name will clear all the sessions associated with the subscriber. In the case of PPP circuit, the PPP state machinery attempts to renegotiate and re-authenticate a new session with the remote peer on the circuit. In the case of RFC 1483 and RFC 1490 encapsulated circuits the circuit is brought down and then back up and an attempt is made to re-authenticate the subscriber bound to the circuit. This object returns a zero-length string when queried.
                   eriRouterSubsClearSessionId 1.3.6.1.4.1.193.218.2.27.1.1.3.2 snmpadminstring read-write
A set of this object will clear the subscriber session identified by this value. In the case of PPP circuit, the PPP state machinery attempts to renegotiate and re-authenticate a new session with the remote peer on the circuit. In the case of RFC 1483 and RFC 1490 encapsulated circuits the circuit is brought down and then back up and an attempt is made to re-authenticate the subscriber bound to the circuit. This object returns a zero-length string when queried.
                   eriRouterSubsBounceName 1.3.6.1.4.1.193.218.2.27.1.1.3.3 snmpadminstring read-write
Each circuit using CLIPS encapsulation used by the named subscriber is brought down and immediately recreated using the RADIUS Access- Accept attributes. Any other circuit encapsulation type is cleared. This object returns a zero-length string when queried.
                   eriRouterSubsBounceSessionId 1.3.6.1.4.1.193.218.2.27.1.1.3.4 snmpadminstring read-write
The circuit using CLIPS encapsulation identified by the RADIUS Acct-Session-Id is brought down and immediately recreated using the RADIUS Access-Accept attributes. Any other circuit encapsulation type is cleared. This object returns a zero-length string when queried.
                   eriRouterSubsReauthRadiusIndex 1.3.6.1.4.1.193.218.2.27.1.1.3.5 unsigned32 read-write
An unsigned integer identifying a set of subscribers defined at the RADIUS server which are to be re-authorized. The source of this value and the set of subscribers to be re-authorized are defined outside the context of this mib module. An get of this attribute returns 0.
                   eriRouterSubsReauthRadiusID 1.3.6.1.4.1.193.218.2.27.1.1.3.6 octet string read-write
An octet string identifying a set of subscribers defined at the RADIUS server which are to be re-authorized. The source of this value and the set of subscribers to be re-authorized are defined outside the context of this mib module. This object returns a zero-length string when queried.
                   eriRouterSubsReauthName 1.3.6.1.4.1.193.218.2.27.1.1.3.7 snmpadminstring read-write
Used to reauthorize all of the active sessions associated with the given subscriber in the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). This object returns a zero-length string when queried.
                   eriRouterSubsReauthSessionId 1.3.6.1.4.1.193.218.2.27.1.1.3.8 snmpadminstring read-write
Used to reauthorize the active session identified by the value of this object and the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). This object returns a zero-length string when queried.
                   eriRouterSubsClearReason 1.3.6.1.4.1.193.218.2.27.1.1.3.9 unsigned32 read-write
An unsigned integer value which may be included in the set request for eriRouterSubsClearSubscriberName, eriRouterSubsClearSessionId, eriRouterSubsBounceName, eriRouterSubsBounceSessionId, or any other objects define under the eriRouterSubsClear OID node. The use of this object value is implementation dependent. This object returns 0 when queried.
               eriRouterSubsServiceVolumeTable 1.3.6.1.4.1.193.218.2.27.1.1.4 no-access
This table specifies service volume information on the subscriber circuits. It contains the volume octet counts for each active subscriber session for which the service is active. All MIB objects defined in the table are viewed within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3).
                   eriRouterSubsServiceVolumeEntry 1.3.6.1.4.1.193.218.2.27.1.1.4.1 no-access
A conceptual row in the EriRouterSubsServiceVolumeTable. Each row contains the service volume limit and volume octet count for each active service session.
                       eriRouterSubsServiceVolumeLimitIn 1.3.6.1.4.1.193.218.2.27.1.1.4.1.1 unsigned32 read-write
The volume limit in kilobytes (KB) allowed for the subscriber service to input (or receive) for this subscriber. If the value is 0, then there is no limit.
                       eriRouterSubsServiceVolumeLimitOut 1.3.6.1.4.1.193.218.2.27.1.1.4.1.2 unsigned32 read-write
The volume limit in kilobytes (KB) allowed for the subscriber service to output (or transmit) for this subscriber. If the value is 0, then there is no limit.
                       eriRouterSubsServiceActiveTime 1.3.6.1.4.1.193.218.2.27.1.1.4.1.3 timestamp read-only
The value of sysUpTime when the service became active for this subscriber. If sysUpTime is reset to zero as a result of a reinitialization of the network management (sub)system, then the values of all TimeStamp objects are also reset.
                       eriRouterSubsServiceVolumeOctetsIn 1.3.6.1.4.1.193.218.2.27.1.1.4.1.4 counter64 read-only
The subscriber session volume octets in count.
                       eriRouterSubsServiceVolumeOctetsOut 1.3.6.1.4.1.193.218.2.27.1.1.4.1.5 counter64 read-only
The subscriber session volume octets out count.
                       eriRouterSubsServiceVolumePktsIn 1.3.6.1.4.1.193.218.2.27.1.1.4.1.6 counter64 read-only
The subscriber session volume packet in count.
                       eriRouterSubsServiceVolumePktsOut 1.3.6.1.4.1.193.218.2.27.1.1.4.1.7 counter64 read-only
The subscriber session volume packet out count.
                       eriRouterSubsIPv4ServiceVolumeOctetsIn 1.3.6.1.4.1.193.218.2.27.1.1.4.1.8 counter64 read-only
The subscriber session volume IPv4 octets in count.
                       eriRouterSubsIPv4ServiceVolumeOctetsOut 1.3.6.1.4.1.193.218.2.27.1.1.4.1.9 counter64 read-only
The subscriber session volume IPv4 octets out count.
                       eriRouterSubsIPv4ServiceVolumePktsIn 1.3.6.1.4.1.193.218.2.27.1.1.4.1.10 counter64 read-only
The subscriber session volume IPv4 packet in count.
                       eriRouterSubsIPv4ServiceVolumePktsOut 1.3.6.1.4.1.193.218.2.27.1.1.4.1.11 counter64 read-only
The subscriber session volume IPv4 packet out count.
                       eriRouterSubsIPv6ServiceVolumeOctetsIn 1.3.6.1.4.1.193.218.2.27.1.1.4.1.12 counter64 read-only
The subscriber session volume IPv6 octets in count.
                       eriRouterSubsIPv6ServiceVolumeOctetsOut 1.3.6.1.4.1.193.218.2.27.1.1.4.1.13 counter64 read-only
The subscriber session volume IPv6 octets out count.
                       eriRouterSubsIPv6ServiceVolumePktsIn 1.3.6.1.4.1.193.218.2.27.1.1.4.1.14 counter64 read-only
The subscriber session volume IPv6 packet in count.
                       eriRouterSubsIPv6ServiceVolumePktsOut 1.3.6.1.4.1.193.218.2.27.1.1.4.1.15 counter64 read-only
The subscriber session volume IPv6 packet out count.
               eriRouterSubsServicesTable 1.3.6.1.4.1.193.218.2.27.1.1.5 no-access
This table contains services available to subscribers.
                   eriRouterSubsServicesEntry 1.3.6.1.4.1.193.218.2.27.1.1.5.1 no-access
A conceptual row in the eriRouterSubsServicesTable.
                       eriRouterSubsServiceIndex 1.3.6.1.4.1.193.218.2.27.1.1.5.1.1 integer32 no-access
A unique index assigned to the entry.
                       eriRouterSubsServiceName 1.3.6.1.4.1.193.218.2.27.1.1.5.1.2 snmpadminstring read-only
The name identifying the service.
                       eriRouterSubsServiceTag 1.3.6.1.4.1.193.218.2.27.1.1.5.1.3 snmpadminstring read-only
A tag associated with the service name which may provide additional qualification to the name.
               eriRouterSubsActiveSessionTable 1.3.6.1.4.1.193.218.2.27.1.1.6 no-access
This table contains active subscriber sessions which have been authenticated on an circuit.
                   eriRouterSubsActiveSessionEntry 1.3.6.1.4.1.193.218.2.27.1.1.6.1 no-access
A conceptual row in the eriRouterSubsActiveSessionTable.
                       eriRouterSubsActiveSessionSubscriberName 1.3.6.1.4.1.193.218.2.27.1.1.6.1.1 snmpadminstring read-only
The subscriber name associated with this session.
                       eriRouterSubsActiveSessionPointer 1.3.6.1.4.1.193.218.2.27.1.1.6.1.2 rowpointer read-only
A pointer to the row in eriRouterSubsActiveTable to which this session belongs. May be {0 0} if there is no such row.
               eriRouterSubsActiveIpAddrTable 1.3.6.1.4.1.193.218.2.27.1.1.7 no-access
This table contains IPv4/IPv6 addresses used by active subscriber sessions.
                   eriRouterSubsActiveIpAddrEntry 1.3.6.1.4.1.193.218.2.27.1.1.7.1 no-access
A conceptual row in the eriRouterSubsActiveIpAddrTable.
                       eriRouterSubsActiveIpAddrType 1.3.6.1.4.1.193.218.2.27.1.1.7.1.1 inetaddresstype read-only
The address type of eriRouterSubsActiveIpAddr.
                       eriRouterSubsActiveIpAddr 1.3.6.1.4.1.193.218.2.27.1.1.7.1.2 inetaddress read-only
The address prefix. The address type of this object is specified in eriRouterSubsActiveIpAddrType. The length of this object is the standard length for objects of that type (4 or 16 bytes). Any bits after eriRouterSubsActiveIpPfxLen must be zero.
                       eriRouterSubsActiveIpPfxLen 1.3.6.1.4.1.193.218.2.27.1.1.7.1.3 inetaddressprefixlength read-only
The prefix length associated with this prefix. For IPv4 active subscriber session, the prefix length is always 32.
                       eriRouterSubsActiveIpAddrDescr 1.3.6.1.4.1.193.218.2.27.1.1.7.1.4 snmpadminstring read-only
Human readable textual format of IP address.
               eriRouterSubsActiveIpv4GlobalTable 1.3.6.1.4.1.193.218.2.27.1.1.8 no-access
This table contains information about the active subscribers in the system. A walk on the table with a specific context would return only those active subscribers belonging to the context. A walk on this table with context local would return all the active subscribers across all contexts in the system. A walk on this table without specifying any context would return all active subscribers across all contexts in the system. This table is supported only for IPv4 subscribers and will not be instantiated for single stack IPv6 subscriber.
                   eriRouterSubsActiveIpv4GlobalEntry 1.3.6.1.4.1.193.218.2.27.1.1.8.1 no-access
A conceptual row in the eriRouterSubsActiveIpv4GlobalTable.
                       eriRouterSubsActiveIpv4GlobalSessionId 1.3.6.1.4.1.193.218.2.27.1.1.8.1.1 snmpadminstring read-only
The session ID for the active subscriber. This object returns the same value as Acct-Session-ID AVP used for subscriber accounting.
                       eriRouterSubsActiveIpv4GlobalName 1.3.6.1.4.1.193.218.2.27.1.1.8.1.2 snmpadminstring read-only
The Username for the active subscriber. User name can be of the format name@context or name@domain.
                       eriRouterSubsActiveIpv4GlobalAddress 1.3.6.1.4.1.193.218.2.27.1.1.8.1.3 ipaddress read-only
The IPv4 address assigned to the active subscriber. For dual stack subscriber, the address of the IPv4 stack is returned.
                       eriRouterSubsActiveIpv4GlobalMask 1.3.6.1.4.1.193.218.2.27.1.1.8.1.4 ipaddress read-only
The IPv4 subnet mask assigned to the active subscriber. The subnet mask is always 255.255.255.255.
           eriRouterSubsStats 1.3.6.1.4.1.193.218.2.27.1.2
               eriRouterSubsCntxtCountTable 1.3.6.1.4.1.193.218.2.27.1.2.1 no-access
This table contains counts of active subscribers by context name. Unlike any of the other tables in this mib module, all rows in this table are accessible when the context 'local' is specified in the snmp message, unless restricted by entries in the vacmAccessTable. Snmp requests using other contexts shall return only the row which matches the context.
                   eriRouterSubsCntxtCountEntry 1.3.6.1.4.1.193.218.2.27.1.2.1.1 no-access
The conceptual row containing the count of active subscribers for each context.
                       eriRouterSubsCntxtCount 1.3.6.1.4.1.193.218.2.27.1.2.1.1.1 gauge32 read-only
The count of active subscribers with either IPv4 or IPv6 or both stack UP.
                       eriRouterSubsCntxtIp4OnlyCount 1.3.6.1.4.1.193.218.2.27.1.2.1.1.2 gauge32 read-only
The count of IPv4 active subscribers which are authorized for only IPv4 protocol stack. This counter does not include subscribers authorized for dual IPv4/IPv6 protocol stack.
                       eriRouterSubsCntxtIp6OnlyCount 1.3.6.1.4.1.193.218.2.27.1.2.1.1.3 gauge32 read-only
The count of IPv6 active subscribers which are authorized for only IPv6 protocol stack. This counter does not include subscribers authorized for dual IPv4/IPv6 protocol stack.
                       eriRouterSubsCntxtDualCount 1.3.6.1.4.1.193.218.2.27.1.2.1.1.4 gauge32 read-only
The count of active subscribers which are authorized for both IPv4 and IPv6 for the context. At any time either one or both stacks may be UP.
                       eriRouterSubsCntxtLacCount 1.3.6.1.4.1.193.218.2.27.1.2.1.1.5 gauge32 read-only
The count of active LAC subscribers.
               eriRouterSubsEncapsCountTable 1.3.6.1.4.1.193.218.2.27.1.2.2 no-access
This table contains counts of active subscribers by encapsulation type.
                   eriRouterSubsEncapsCountEntry 1.3.6.1.4.1.193.218.2.27.1.2.2.1 no-access
A conceptual row in the eriRouterSubsEncapsCountTable.
                       eriRouterSubsEncapsulationType 1.3.6.1.4.1.193.218.2.27.1.2.2.1.1 integer no-access
This object identifies the type of encapsulation the subscriber is using. Note that 'ppp' includes all types of supported ppp, excluding pppoe. Enumeration: 'multi1490': 10, 'routed1483': 4, 'dot1qEnet': 7, 'routed1490': 9, 'clips': 12, 'bridged1483': 3, 'other': 255, 'dot1q1483': 6, 'bridged1490': 8, 'ppp': 1, 'pppoe': 2, 'multi1483': 5, 'dot1q1490': 11.
                       eriRouterSubsEncapsCount 1.3.6.1.4.1.193.218.2.27.1.2.2.1.2 gauge32 read-only
The count of active subscribers for the encapsulation type.
               eriRouterSubsStatsTable 1.3.6.1.4.1.193.218.2.27.1.2.3 no-access
This table contains counters for individual circuits.
                   eriRouterSubsStatsEntry 1.3.6.1.4.1.193.218.2.27.1.2.3.1 no-access
A conceptual row in the eriRouterSubsStatsTable.
                       eriRouterSubsOctetsSent 1.3.6.1.4.1.193.218.2.27.1.2.3.1.1 counter64 read-only
The number of octets sent by the circuit. This counter includes multicast activity.
                       eriRouterSubsOctetsReceived 1.3.6.1.4.1.193.218.2.27.1.2.3.1.2 counter64 read-only
The number of octets received by the circuit. This counter includes multicast activity.
                       eriRouterSubsPktsSent 1.3.6.1.4.1.193.218.2.27.1.2.3.1.3 counter64 read-only
The number of packets sent by the circuit. This counter includes multicast activity.
                       eriRouterSubsPktsReceived 1.3.6.1.4.1.193.218.2.27.1.2.3.1.4 counter64 read-only
The number of packets received by the circuit. This counter includes multicast activity.
                       eriRouterSubsXmitOctetsDropped 1.3.6.1.4.1.193.218.2.27.1.2.3.1.5 counter32 read-only
The number of octets dropped by the circuit before transmission.
                       eriRouterSubsXmitPktsDropped 1.3.6.1.4.1.193.218.2.27.1.2.3.1.6 counter32 read-only
The number of packets dropped by the circuit before transmission.
                       eriRouterSubsMcastOctetsSent 1.3.6.1.4.1.193.218.2.27.1.2.3.1.7 counter64 read-only
The number of multicast octets sent by the circuit.
                       eriRouterSubsMcastOctetsReceived 1.3.6.1.4.1.193.218.2.27.1.2.3.1.8 counter64 read-only
The number of multicast octets received by the circuit.
                       eriRouterSubsMcastPktsSent 1.3.6.1.4.1.193.218.2.27.1.2.3.1.9 counter64 read-only
The number of multicast packets sent by the circuit.
                       eriRouterSubsMcastPktsReceived 1.3.6.1.4.1.193.218.2.27.1.2.3.1.10 counter64 read-only
The number of multicast packets received by the circuit.
                       eriRouterSubsIPv4OctetsSent 1.3.6.1.4.1.193.218.2.27.1.2.3.1.11 counter64 read-only
The number of IPv4 octets sent by the circuit. This counter includes multicast activity.
                       eriRouterSubsIPv4OctetsReceived 1.3.6.1.4.1.193.218.2.27.1.2.3.1.12 counter64 read-only
The number of IPv4 octets received by the circuit. This counter includes multicast activity.
                       eriRouterSubsIPv6OctetsSent 1.3.6.1.4.1.193.218.2.27.1.2.3.1.13 counter64 read-only
The number of IPv6 octets sent by the circuit. This counter includes multicast activity.
                       eriRouterSubsIPv6OctetsReceived 1.3.6.1.4.1.193.218.2.27.1.2.3.1.14 counter64 read-only
The number of IPv6 octets received by the circuit. This counter includes multicast activity.
                       eriRouterSubsIPv4PktsSent 1.3.6.1.4.1.193.218.2.27.1.2.3.1.15 counter64 read-only
The number of IPv4 packets sent by the circuit. This counter includes multicast activity.
                       eriRouterSubsIPv4PktsReceived 1.3.6.1.4.1.193.218.2.27.1.2.3.1.16 counter64 read-only
The number of IPv4 packets received by the circuit. This counter includes multicast activity.
                       eriRouterSubsIPv6PktsSent 1.3.6.1.4.1.193.218.2.27.1.2.3.1.17 counter64 read-only
The number of IPv6 packets sent by the circuit. This counter includes multicast activity.
                       eriRouterSubsIPv6PktsReceived 1.3.6.1.4.1.193.218.2.27.1.2.3.1.18 counter64 read-only
The number of IPv6 packets received by the circuit. This counter includes multicast activity.
                       eriRouterSubsIPv4McastOctetsSent 1.3.6.1.4.1.193.218.2.27.1.2.3.1.19 counter64 read-only
The number of IPv4 multicast octets sent by the circuit.
                       eriRouterSubsIPv4McastOctetsReceived 1.3.6.1.4.1.193.218.2.27.1.2.3.1.20 counter64 read-only
The number of IPv4 multicast octets received by the circuit.
                       eriRouterSubsIPv6McastOctetsSent 1.3.6.1.4.1.193.218.2.27.1.2.3.1.21 counter64 read-only
The number of IPv6 multicast octets sent by the circuit.
                       eriRouterSubsIPv6McastOctetsReceived 1.3.6.1.4.1.193.218.2.27.1.2.3.1.22 counter64 read-only
The number of IPv6 multicast octets received by the circuit.
                       eriRouterSubsIPv4McastPktsSent 1.3.6.1.4.1.193.218.2.27.1.2.3.1.23 counter64 read-only
The number of IPv4 multicast packets sent by the circuit.
                       eriRouterSubsIPv4McastPktsReceived 1.3.6.1.4.1.193.218.2.27.1.2.3.1.24 counter64 read-only
The number of IPv4 multicast packets received by the circuit.
                       eriRouterSubsIPv6McastPktsSent 1.3.6.1.4.1.193.218.2.27.1.2.3.1.25 counter64 read-only
The number of IPv6 multicast packets sent by the circuit.
                       eriRouterSubsIPv6McastPktsReceived 1.3.6.1.4.1.193.218.2.27.1.2.3.1.26 counter64 read-only
The number of IPv6 multicast packets received by the circuit.
               eriRouterSubsProfileCountTable 1.3.6.1.4.1.193.218.2.27.1.2.4 no-access
This table contains counts of active subscribers by encapsulation type.
                   eriRouterSubsProfileCountEntry 1.3.6.1.4.1.193.218.2.27.1.2.4.1 no-access
A conceptual row in the eriRouterSubsProfileCountTable.
                       eriRouterSubsProfileName 1.3.6.1.4.1.193.218.2.27.1.2.4.1.1 snmpadminstring no-access
The profile name which applies to a set of subscribers.
                       eriRouterSubsProfileCount 1.3.6.1.4.1.193.218.2.27.1.2.4.1.2 gauge32 read-only
The count of active subscribers for the profile name.
               eriRouterSubsLicense 1.3.6.1.4.1.193.218.2.27.1.2.5
                   eriRouterSubsMaxSupportedSessions 1.3.6.1.4.1.193.218.2.27.1.2.5.1 gauge32 read-only
The maximum number of active subscriber sessions that are supported on the SmartEdge router.
                   eriRouterSubsLicensedSessions 1.3.6.1.4.1.193.218.2.27.1.2.5.2 gauge32 read-only
The number of licensed subscriber sessions on the SmartEdge router.
                   eriRouterSubsActiveSessions 1.3.6.1.4.1.193.218.2.27.1.2.5.3 gauge32 read-only
The number of active subscriber sessions on the SmartEdge router.
                   eriRouterSubsCapacityPercentageUsed 1.3.6.1.4.1.193.218.2.27.1.2.5.4 erirouterpercentage read-only
The percentage of licensed subscriber sessions in use on the SmartEdge router. This value is computed as: if eriRouterSubsLicensedSessions equals 0 then if eriRouterSubsActiveSessions equals 0 then 0 else 100 else MIN((eriRouterSubsActiveSessions * 100)/eriRouterSubsLicensedSessions), 100).
           eriRouterSubsNotify 1.3.6.1.4.1.193.218.2.27.1.3
               eriRouterSubsNotifyEnable 1.3.6.1.4.1.193.218.2.27.1.3.1 truthvalue read-write
This object will provide a mechanism for enabling and disabling subscriber notifications. A value of 1 (true) indicates that subscriber notifications are enabled. A value of 2 (false) indicates that subscriber notifications are disabled.
               eriRouterSubsConfigErrorMsgs 1.3.6.1.4.1.193.218.2.27.1.3.2 snmpadminstring no-access
Detailed error messages that describes the mis-configured attributes that failed authentication.
       eriRouterSubsActiveConformance 1.3.6.1.4.1.193.218.2.27.2
           eriRouterSubsCompliances 1.3.6.1.4.1.193.218.2.27.2.1
               eriRouterSubsCompliance 1.3.6.1.4.1.193.218.2.27.2.1.1
The compliance statement for SNMP entities which implement the Subscriber MIB. This compliance is replaced by eriRouterSubsCompliance2
               eriRouterSubsCompliance2 1.3.6.1.4.1.193.218.2.27.2.1.2
The compliance statement for SNMP entities which implement the Subscriber MIB. This compliance is replaced by eriRouterSubsCompliance3
               eriRouterSubsCompliance3 1.3.6.1.4.1.193.218.2.27.2.1.3
The compliance statement for SNMP entities which implement the Subscriber MIB. This compliance is replaced by eriRouterSubsCompliance4.
               eriRouterSubsCompliance4 1.3.6.1.4.1.193.218.2.27.2.1.4
The compliance statement for SNMP entities which implement the Subscriber MIB.
               eriRouterSubsCompliance5 1.3.6.1.4.1.193.218.2.27.2.1.5
The compliance statement for SNMP entities which implement the Subscriber MIB.
               eriRouterSubsCompliance6 1.3.6.1.4.1.193.218.2.27.2.1.6
The compliance statement for SNMP entities which implement the Subscriber MIB.
           eriRouterSubsGroups 1.3.6.1.4.1.193.218.2.27.2.2
               eriRouterSubsActiveGroup 1.3.6.1.4.1.193.218.2.27.2.2.1
The collection of objects which represent an active subscriber. This group is replaced by eriRouterSubsActiveGroup2.
               eriRouterSubsStatsGroup 1.3.6.1.4.1.193.218.2.27.2.2.2
The collection of objects which are generic counters of subscriber activity. This group is replaced by eriRouterSubsStatsGroup2
               eriRouterSubsActiveGroup2 1.3.6.1.4.1.193.218.2.27.2.2.3
The collection of objects which represent an active subscriber.
               eriRouterSubsStatsGroup2 1.3.6.1.4.1.193.218.2.27.2.2.4
The collection of objects which are generic counters of subscriber activity.
               eriRouterSubsActiveGroup3 1.3.6.1.4.1.193.218.2.27.2.2.5
The collection of objects which represent an active subscriber. This collection includes the objects eriRouterSubsActiveNasPortType and eriRouterSubsActiveMediumType.
               eriRouterSubsServicesGroup 1.3.6.1.4.1.193.218.2.27.2.2.6
The collection of objects which represent Service Volume attributes.
               eriRouterSubsNotifyObjectGroup 1.3.6.1.4.1.193.218.2.27.2.2.7
The collection of objects related to subscriber notifications.
               eriRouterSubsNotifyGroup 1.3.6.1.4.1.193.218.2.27.2.2.8
Notification for tracking the failed attributes of subscriber active sessions.
               eriRouterSubsLicenseGroup 1.3.6.1.4.1.193.218.2.27.2.2.9
The collection of objects related to subscriber licenses.
               eriRouterSubsActiveGroup4 1.3.6.1.4.1.193.218.2.27.2.2.10
The collection of objects which represent an active subscriber. This collection includes the objects eriRouterSubsActiveNasPortType and eriRouterSubsActiveMediumType.
               eriRouterSubsStatsGroup3 1.3.6.1.4.1.193.218.2.27.2.2.11
The collection of objects which are generic counters of subscriber activity.
       eriRouterSubsActiveNotifications 1.3.6.1.4.1.193.218.2.27.3
           eriRouterSubsNotifyPrefix 1.3.6.1.4.1.193.218.2.27.3.0
               eriRouterSubsConfigErrorEvent 1.3.6.1.4.1.193.218.2.27.3.0.1
This notification signifies that the subscriber session received one or more attribute(s) referring non-existing configuration, and the subscriber session is allowed to stay up.